SIT timing pulleys - EAGLE
|
|
|
- Christiana Price
- 6 years ago
- Views:
Transcription
1 IT timing pulleys - EAGLE The IT EAGLE pulleys, manufacture with innovative high-tech equipments, have been specifically esigne to fit with the ILENT NC belt. This combination, thanks to the continuous an graual engagement of the belt with the pulleys, is the best solution existing toay in terms of noise abatement, wear reuction an vibration ampening. The EAGLE transmission is the only one that guarantees the self-alignment, even uner high loa conitions or extreme peripheal spee. For this reason EAGLE pulleys on t nee flanges; the result is a more compact rive system. The stanar EAGLE pulleys are statically balance. oli hub : /spheroial cast iron/grey cast iron/aluminum Finishing: black manganese phosphating Pitch: 5M 8M 0M 4M For mounting taper bushing E-IT : /spheroial cast iron/grey cast iron Finishing: black manganese phosphating Pitch: 4M Attention: for non-stanar executions, it is important to inicate the orientation of the teeth relative to the position of the hub (as per above pictures). External Diameter TOLEANCE Pulley iameter tolerances Tolerances up to 0,6-0,00 +0,3 from 0,7 to 77,8-0,00 +0,3 from 77,9 to 304,8-0,00 +0,5 from 304,9 to 508,0-0,00 +0,8 from 508, to 750,0-0,00 +0,0 aial circular runout pecial executions pon request, IT is able to esign an manufacture any type of pulley base on customer requirements. For peripheral spee exceeing 33 m/s it is strongly recommene to use as material of construction. In case of aluminium execution is possible to reuce the pulley abrasion, ue to the nylon belt coating, thanks to a high thickness anoization coating on the pulley teeth (on request). External Diameter Tolerances up to 0,6 0,3 from 0,7 to 77,8 0,3 from 77,9 to 304,8 0,5 from 304,9 to 508,0 0,0 from 508, to 750,0 0,30 Pulley with Cylinricity tolerance Tolerances peripheral spee [m/s] = pulley iameter rpm 900 for any 00 mm 0, mm without exceeing the external iameter tolerance Protective coating All ( an cast iron) pulleys are treate with a black manganese phosphating process that gives greater resistance against oxiizing agents. This treatment oes not moify the profile or the imensions of the pulleys. On request IT can provie a wie range of special coating, relate to the customer specific nees or environmental critical conitions. Note Due to a constant improvement of our proucts, technical ata of the pulleys may be subject to changes. 68 Pulleys an components
2 Dimensions of timing pulleys EAGLE - soli hub pitches 8M - 4M Part Number EAGLE timing pulley - soli hub Belt with Number of teeth oli hub PE -3 -MPB TIMING PuLLE - PE ellow - belt with = 6 mm 8M 8 Coe PE-8-MPB 8 45,84 44,47-38,4,7 7,0 7,0 0,0 6,0 PE-0-MPB 0 50,93 49,56-40,7,7 7,0 9,0,0 7,0 PE--MPB 56,0 54,65-45,9,7 7,0 9,0,0 3,0 PE-4-MPB 4 6, 59,75-5,0,7 7,0 33,0 6,0 34,0 PE-5-MPB 5 63,66 6,9-53,5,7 7,0 33,0 6,0 36,0 PE-6-MPB 6 66, 64,84-57,8,7 7,0 33,0 6,0 39,0 PE-8-MPB 8 7,30 69,93-6,0,7 7,0 33,0 6,0 4,0 PE-30-MPB 30 76,40 75,03-67,0,7 7,0 33,0 6,0 45,0 PE-3-MPB 3 8,49 80, - 7,0,7 7,0 33,0 6,0 48,0 PE-34-MPB 34 86,58 85, - 77,0,7 7,0 33,0 6,0 5,0 PE-36-MPB 36 9,68 90,30-8,0,7 7,0 33,0 6,0 55,0 PE-38-MPB 38 96,77 95,40-87,0,7 7,0 33,0 6,0 58,0 PE-40-MPB 40 0,86 00,49-9,0,7 7,0 33,0 6,0 6,0 PE-44-MPB 44,05 0,68-0,0,7 7,0 33,0 6,0 68,0 PE-45-MPB 45 4,59 3, - 05,0,7 7,0 33,0 6,0 70,0 PE-48-MPB 48,3 0,86 -,0,7 7,0 33,0 6,0 75,0 PE-50-MPB 50 7,33 5,96-8,0,7 7,0 33,0 6,0 79,0 PE-5-MPB 5 3,4 3,05-3,0,7 7,0 33,0 6,0 8,0 PE-56-MPB 56 4,6 4,4-33,0,7 7,0 33,0 6,0 89,0 PE-60-MPB 60 5,79 5,4-43,0,7 7,0 33,0 6,0 96,0 PE-63-MPB 63 60,43 59,06 39,0 0,0,7 7,0 33,0 6,0 73,0 PE-64-MPB 64 6,98 6,6 4,0 0,0,7 7,0 33,0 6,0 74,0 PE-68-MPB 68 73,7 7,79 5,0 0,0,7 7,0 33,0 6,0 74,0 PE-7-MPB 7 83,35 8,98 6,0 0,0,7 7,0 33,0 6,0 74,0 PE-75-MPB 75 90,99 89,6 70,0 0,0,7 7,0 33,0 6,0 73,0 PE-76-MPB 76 93,54 9,7 7,0 0,0,7 7,0 33,0 6,0 74,0 PE-80-MPB 80 03,7 0,35 8,0 0,0,7 7,0 33,0 6,0 73,0 PE-90-MPB 90 9,9 7,8 08,0 0,0 5,4 7,0 33,0 6,0 73,0 PE--MPB 85, 83,84 64,0 0,0 5,4 7,0 33,0 6,0 73,0 PE-40-MPB ,5 355,5 335,0 0,0 5,4 7,0 33,0 6,0 73,0 PE-80-MPB ,38 457,0 433,0 50,0 5,4 7,0 33,0 6,0 00,0 PE-4-MPB ,43 569,06 545,0 50,0 5,4 7,0 33,0 6,0 00,0 G400 = spheroial cast iron - = grey cast iron G Pulleys an components 69
3 Dimensions of timing pulleys EAGLE - soli hub hite - belt with = 3 mm 8M Coe PE-8-MPB 8 45,84 44,47-38,4,7 33,0 43,0 0,0 6,0 PE-0-MPB 0 50,93 49,56-40,7,7 33,0 45,0,0 7,0 PE--MPB 56,0 54,65-45,9,7 33,0 45,0,0 3,0 PE-4-MPB 4 6, 59,75-5,0,7 33,0 49,0 6,0 34,0 PE-5-MPB 5 63,66 6,9-53,5,7 33,0 49,0 6,0 36,0 PE-6-MPB 6 66, 64,84-57,8,7 33,0 49,0 6,0 39,0 PE-8-MPB 8 7,30 69,93-6,0,7 33,0 49,0 6,0 4,0 PE-30-MPB 30 76,40 75,03-67,0,7 33,0 49,0 6,0 45,0 PE-3-MPB 3 8,49 80, - 7,0,7 33,0 49,0 6,0 48,0 PE-34-MPB 34 86,58 85, - 77,0,7 33,0 49,0 6,0 5,0 8 PE-36-MPB 36 9,68 90,30-8,0,7 33,0 49,0 6,0 55,0 PE-38-MPB 38 96,77 95,40-87,0,7 33,0 49,0 6,0 58,0 PE-40-MPB 40 0,86 00,49-9,0,7 33,0 49,0 6,0 6,0 PE-44-MPB 44,05 0,68-0,0,7 33,0 49,0 6,0 68,0 PE-45-MPB 45 4,59 3, - 05,0,7 33,0 49,0 6,0 70,0 PE-48-MPB 48,3 0,86 -,0,7 33,0 49,0 6,0 75,0 PE-50-MPB 50 7,33 5,96-8,0,7 33,0 49,0 6,0 79,0 PE-5-MPB 5 3,4 3,05-3,0,7 33,0 49,0 6,0 8,0 PE-56-MPB 56 4,6 4,4-33,0,7 33,0 49,0 6,0 89,0 PE-60-MPB 60 5,79 5,4-43,0,7 33,0 49,0 6,0 96,0 PE-63-MPB 63 60,43 59,06-5,0,7 33,0 49,0 6,0 0,0 PE-64-MPB 64 6,98 6,6-53,0,7 33,0 49,0 6,0 0,0 PE-68-MPB 68 73,7 7,79 5,0 0,0 5,4 33,0 49,0 6,0 80,0 PE-7-MPB 7 83,35 8,98 6,0 0,0 5,4 33,0 49,0 6,0 80,0 8 PE-75-MPB 75 90,99 89,6 70,0 0,0 5,4 33,0 49,0 6,0 80,0 PE-76-MPB 76 93,54 9,7 7,0 0,0 5,4 33,0 49,0 6,0 80,0 PE-80-MPB 80 03,7 0,35 8,0 0,0 5,4 33,0 49,0 6,0 80,0 G400 PE-90-MPB 90 9,9 7,8 08,0 0,0 5,4 33,0 49,0 6,0 80,0 PE--MPB 85, 83,84 64,0 0,0 5,4 33,0 49,0 6,0 80,0 PE-40-MPB ,5 355,5 335,0 50,0 5,4 33,0 49,0 6,0 00,0 PE-80-MPB ,38 457,00 433,0 50,0 5,4 33,0 49,0 6,0 00,0 PE-4-MPB ,43 569,04 545,0 50,0 5,4 33,0 49,0 6,0 00,0 G400 = spheroial cast iron - = grey cast iron Pulleys an components
4 Dimensions of timing pulleys EAGLE - soli hub Purple P - belt with = 64 mm Coe PEP-8-MPB 8 45,84 44,47-38,4,7 65,0 85,0 0,0 6,0 PEP-0-MPB 0 50,93 49,55-40,7,7 65,0 85,0 0,0 7,0 PEP--MPB 56,0 54,64-45,9,7 65,0 85,0 0,0 3,0 PEP-4-MPB 4 6, 59,74-5,0,7 65,0 85,0 0,0 34,0 PE P-5-MPB 5 63,66 6,8-53,5,7 65,0 85,0 0,0 36,0 PEP-6-MPB 6 66, 64,83-57,8,7 65,0 85,0 0,0 39,0 PEP-8-MPB 8 7,30 69,9-6,0,7 65,0 85,0 0,0 4,0 PEP-30-MPB 30 76,39 75,0-67,0,7 65,0 85,0 0,0 45,0 PEP-3-MPB 3 8,49 80, - 7,0,7 65,0 85,0 0,0 48,0 PEP-34-MPB 34 86,58 85,0-77,0,7 65,0 85,0 0,0 5,0 PEP-36-MPB 36 9,67 90,9-8,0,7 65,0 85,0 0,0 55,0 PEP-38-MPB 38 96,77 95,39-87,0,7 65,0 85,0 0,0 58,0 PEP-40-MPB 40 0,86 00,48-9,0,7 65,0 85,0 0,0 6,0 PEP-44-MPB 44,05 0,67-0,0,7 65,0 85,0 0,0 68,0 PEP-45-MPB 45 4,59 3, - 05,0,7 65,0 85,0 0,0 70,0 PEP-48-MPB 48,3 0,85 -,0 5,4 65,0 85,0 0,0 75,0 PEP-50-MPB 50 7,3 5,94-8,0 5,4 65,0 85,0 0,0 79,0 PEP-5-MPB 5 3,4 3,04-3,0 5,4 65,0 85,0 0,0 8,0 PEP-56-MPB 56 4,60 4, - 33,0 5,4 65,0 85,0 0,0 89,0 PEP-60-MPB 60 5,79 5,4-43,0 5,4 65,0 85,0 0,0 96,0 PEP-63-MPB 63 60,43 59,05-5,0 5,4 65,0 85,0 0,0 0,0 PEP-64-MPB 64 6,98 6,60-53,0 5,4 65,0 85,0 0,0 0,0 PEP-68-MPB 68 73,7 7,79 5,0 0,0 5,4 65,0 85,0 0,0 80,0 PEP-7-MPB 7 83,35 8,97 6,0 0,0 5,4 65,0 85,0 0,0 80,0 PEP-75-MPB 75 90,99 89,6 70,0 0,0 5,4 65,0 85,0 0,0 80,0 PEP-76-MPB 76 93,53 9,5 7,0 0,0 5,4 65,0 85,0 0,0 80,0 PEP-80-MPB 80 03,7 0,34 8,0 0,0 5,4 65,0 85,0 0,0 80,0 PEP-90-MPB 90 9,8 7,80 08,0 0,0 5,4 65,0 85,0 0,0 80,0 PEP--MPB 85, 83,83 64,0 0,0 5,4 65,0 85,0 0,0 80,0 PEP-40-MPB ,5 355,4 335,0 50,0 5,4 65,0 85,0 0,0 00,0 PEP-80-MPB ,37 457,00 433,0 50,0 5,4 65,0 85,0 0,0 00,0 PEP-4-MPB ,4 569,04 545,0 50,0 5,4 65,0 85,0 0,0 00,0 G400 = spheroial cast iron - = grey cast iron 8M G TIMING PuLLE - PE 8 3 Pulleys an components 7
5 Dimensions of timing pulleys EAGLE - soli hub Blue B - belt with = 35 mm 4M Coe PEB-8-MPB 8 4,78,99-05,0 5,4 37,0 53,0 6,0 70,0 PEB-30-MPB 30 33,69 30,90-4,0 5,4 37,0 53,0 6,0 76,0 PEB-3-MPB 3 4,6 39,8-3,0 5,4 37,0 53,0 6,0 8,0 PEB-34-MPB 34 5,5 48,73-3,0 5,4 37,0 53,0 6,0 88,0 PEB-36-MPB 36 60,43 57,64-4,0 5,4 37,0 53,0 6,0 94,0 PEB-38-MPB 38 69,35 66,55-50,0 5,4 37,0 53,0 6,0 00,0 PEB-40-MPB 40 78,6 75,46-59,0 5,4 37,0 53,0 6,0 06,0 PEB-43-MPB 43 9,63 88,83-7,0 5,4 37,0 53,0 6,0 5,0 PEB-45-MPB 45 00,54 97,75-8,0 5,4 37,0 53,0 6,0,0 PEB-48-MPB 48 3,9, - 95,0 5,4 37,0 53,0 6,0 30,0 PEB-50-MPB 50,8 0,03 85,0 50,0 5,4 37,0 53,0 6,0 00,0 PEB-56-MPB 56 49,56 46,77,0 50,0 5,4 37,0 53,0 6,0 00,0 PEB-60-MPB 60 67,39 64,59 30,0 50,0 5,4 37,0 53,0 6,0 00,0 PEB-63-MPB 63 80,76 77,96 43,0 50,0 5,4 37,0 53,0 6,0 00,0 PEB-7-MPB 7 36,4 33,6 79,0 50,0 5,4 37,0 53,0 6,0 00,0 PEB-75-MPB ,4 33,44 96,0 50,0 5,4 37,0 53,0 6,0 00,0 PEB-80-MPB ,5 353,7 39,0 50,0 5,4 37,0 53,0 6,0 00,0 PEB-90-MPB 90 40,08 398,9 358,0 50,0 5,4 37,0 53,0 6,0 00,0 PEB--MPB 3 499, 496,33 456,0 50,0 5,4 37,0 53,0 6,0 00,0 PEB-40-MPB ,9 6, 58,0 50,0 5,4 37,0 53,0 6,0 00,0 PEB-68-MPB ,69 745,89 706,0 50,0 5,4 37,0 53,0 6,0 00,0 G Green G - with = 5,5 mm 4M Coe PEG-8-MPB 8 4,78,99-09,0 5,4 54,5 74,5 0,0 73,0 PEG-30-MPB 30 33,69 30,90-7,5 5,4 54,5 74,5 0,0 78,0 PEG-3-MPB 3 4,6 39,8-6,5 5,4 54,5 74,5 0,0 84,0 PEG-34-MPB 34 5,5 48,73-35,5 5,4 54,5 74,5 0,0 90,0 PEG-36-MPB 36 60,43 57,64-4,0 5,4 54,5 70,5 6,0 94,0 PEG-38-MPB 38 69,35 66,55-50,0 5,4 54,5 70,5 6,0 00,0 PEG-40-MPB 40 78,6 75,46-59,0 5,4 54,5 70,5 6,0 06,0 8 PEG-43-MPB 43 9,63 88,83-7,0 5,4 54,5 70,5 6,0 5,0 PEG-45-MPB 45 00,54 97,75-8,0 5,4 54,5 70,5 6,0,0 PEG-48-MPB 48 3,9, - 95,0 5,4 54,5 70,5 6,0 30,0 PEG-50-MPB 50,8 0,03 85,0 50,0 5,4 54,5 70,5 6,0 00,0 PEG-56-MPB 56 49,56 46,77,0 50,0 5,4 54,5 70,5 6,0 00,0 PEG-60-MPB 60 67,39 64,59 30,0 50,0 5,4 54,5 70,5 6,0 00,0 PEG-63-MPB 63 80,76 77,96 43,0 50,0 5,4 54,5 70,5 6,0 00,0 PEG-7-MPB 7 36,4 33,6 79,0 50,0 5,4 54,5 70,5 6,0 00,0 PEG-75-MPB ,4 33,44 96,0 50,0 5,4 54,5 70,5 6,0 00,0 G400 3 PEG-80-MPB ,5 353,7 39,0 50,0 5,4 54,5 70,5 6,0 00,0 PEG-90-MPB 90 40,08 398,9 358,0 80,0 5,4 54,5 70,5 6,0 0,0 PEG--MPB 3 499, 496,33 456,0 80,0 5,4 54,5 70,5 6,0 0,0 PEG-40-MPB ,9 6, 58,0 00,0 5,4 54,5 70,5 6,0 33,0 PEG-68-MPB ,69 745,89 706,0 00,0 5,4 54,5 70,5 6,0 33,0 G400 = spheroial cast iron - = grey cast iron 7 Pulleys an components
6 Dimensions of timing pulleys EAGLE - soli hub Orange O - belt with = 70 mm Coe PEO-8-MPB 8 4,78,99-09,0 5,4 7,0 9,0 0,0 73,0 PEO-30-MPB 30 33,69 30,90-7,5 5,4 7,0 9,0 0,0 78,0 PEO-3-MPB 3 4,6 39,8-6,5 5,4 7,0 98,0 6,0 84,0 PEO-34-MPB 34 5,5 48,73-35,5 5,4 7,0 98,0 6,0 90,0 PEO-36-MPB 36 60,43 57,64-44,0 5,4 7,0 98,0 6,0 95,0 4M TIMING PuLLE - PE PEO-38-MPB 38 69,35 66,55-53,0 5,4 7,0 98,0 6,0 0,0 PEO-40-MPB 40 78,6 75,46-6,0 5,4 7,0 98,0 6,0 07,0 PEO-43-MPB 43 9,63 88,83-74,0 5,4 7,0 88,0 6,0 6,0 PEO-45-MPB 45 00,54 97,75-83,0 5,4 7,0 88,0 6,0,0 PEO-48-MPB 48 3,9, - 97,0 5,4 7,0 88,0 6,0 3,0 8 PEO-50-MPB 50,8 0,03-05,0 5,4 7,0 88,0 6,0 37,0 PEO-56-MPB 56 49,56 46,77-30,0 5,4 7,0 88,0 6,0 53,0 PEO-60-MPB 60 67,39 64,59 30,0 50,0 5,4 7,0 88,0 6,0 00,0 PEO-63-MPB 63 80,76 77,96 43,0 50,0 5,4 7,0 88,0 6,0 00,0 PEO-7-MPB 7 36,4 33,6 79,0 50,0 5,4 7,0 88,0 6,0 00,0 PEO-75-MPB ,4 33,44 96,0 80,0 5,4 7,0 88,0 6,0 0,0 G400 PEO-80-MPB ,5 353,7 39,0 80,0 5,4 7,0 88,0 6,0 0,0 PEO-90-MPB 90 40,08 398,9 358,0 00,0 5,4 7,0 88,0 6,0 33,0 PEO--MPB 3 499, 496,33 456,0 00,0 5,4 7,0 88,0 6,0 33,0 PEO-40-MPB ,9 6, 58,0 0,0 5,4 7,0 88,0 6,0 47,0 PEO-68-MPB ,69 745,89 706,0 0,0 5,4 7,0 88,0 6,0 47,0 8 e - belt with = 05 mm 4M Coe PE-8-MPB 8 4,78,99-09,0 5,4 07,0 33,0 6,0 73,0 PE-30-MPB 30 33,69 30,90-7,5 5,4 07,0 33,0 6,0 78,0 PE-3-MPB 3 4,6 39,8-6,5 5,4 07,0 33,0 6,0 84,0 PE-34-MPB 34 5,5 48,73-35,5 5,4 07,0 33,0 6,0 90,0 PE-36-MPB 36 60,43 57,64-44,0 5,4 07,0 33,0 6,0 96,0 PE-38-MPB 38 69,35 66,55-53,0 5,4 07,0 33,0 6,0 0,0 PE-40-MPB 40 78,6 75,46-6,0 5,4 07,0 33,0 6,0 08,0 8 PE-43-MPB 43 9,63 88,83-74,0 5,4 07,0 33,0 6,0 7,0 PE-45-MPB 45 00,54 97,75-83,0 5,4 07,0 3,0 6,0,0 PE-48-MPB 48 3,9, - 97,0 5,4 07,0 3,0 6,0 3,0 PE-50-MPB 50,8 0,03-05,0 5,4 07,0 3,0 6,0 37,0 PE-56-MPB 56 49,56 46,77-30,0 5,4 07,0 3,0 6,0 53,0 PE-60-MPB 60 67,39 64,59 30,0 80,0 5,4 07,0 3,0 6,0 0,0 PE-63-MPB 63 80,76 77,96 43,0 80,0 5,4 07,0 3,0 6,0 0,0 PE-7-MPB 7 36,4 33,6 79,0 00,0 5,4 07,0 3,0 6,0 33,0 PE-75-MPB ,4 33,44 96,0 00,0 5,4 07,0 3,0 6,0 33,0 G400 3 PE-80-MPB ,5 353,7 39,0 00,0 5,4 07,0 3,0 6,0 33,0 PE-90-MPB 90 40,08 398,9 358,0 0,0 5,4 07,0 3,0 6,0 47,0 PE--MPB 3 499, 496,33 456,0 0,0 5,4 07,0 3,0 6,0 47,0 PE-40-MPB ,9 6, 58,0 40,0 5,4 07,0 3,0 6,0 60,0 PE-68-MPB ,69 745,89 706,0 40,0 5,4 07,0 3,0 6,0 60,0 G400 = spheroial cast iron - = grey cast iron Pulleys an components 73
7 Dimensions of timing pulleys EAGLE - mounting taper bushing E-IT passo 4M Part Number PBE B EAGLE timing pulley - soli hub Belt with Number of teeth Taper bushing size Blue B - belt with = 35 mm 4M Coe Taper bushing E-IT â G400 = spheroial cast iron - = grey cast iron PBEB ,78,99 8,0-37,0 3,0 5,0 PBEB ,69 30,90-4,0 37,0 45,0 8,0 PBEB ,6 39,8-3,0 37,0 45,0 8,0 PBEB ,5 48,73-3,0 37,0 45,0 8,0 PBEB ,43 57,64-4,0 37,0 5,0 4,0 PBEB ,35 66,55-50,0 37,0 5,0 4,0 PBEB ,6 75,46-59,0 37,0 5,0 4,0 PBEB ,63 88,83-7,0 37,0 5,0 4,0 PBEB ,54 97,75-8,0 37,0 5,0 4,0 PBEB ,9, - 95,0 37,0 5,0 4,0 PBEB ,8 0,03 80,0 50,0 37,0 5,0 4,0 PBEB ,56 46,77 07,0 50,0 37,0 5,0 4,0 PBEB ,39 64,59 5,0 50,0 37,0 5,0 4,0 PBEB ,76 77,96 38,0 50,0 37,0 5,0 4,0 PBEB ,4 33,6 74,0 50,0 37,0 5,0 4,0 PBEB ,4 33,44 9,0 50,0 37,0 5,0 4,0 PBEB ,5 353,7 34,0 50,0 37,0 5,0 4,0 PBEB ,08 398,9 358,0 50,0 37,0 5,0 4,0 PBEB , 496,33 456,0 50,0 37,0 5,0 4,0 PBEB ,9 6, 58,0 50,0 37,0 5,0 4,0 PBEB ,69 745,89 706,0 50,0 37,0 5,0 4,0 G Pulleys an components
8 Dimensions of timing pulleys EAGLE - mounting taper bushing E-IT Green G - belt with = 5,5 mm Coe Taper bushing E-IT â PBEG ,78,99 86,0-54,5 45,0 9,5 PBEG ,69 30,90 90,0-54,5 45,0 9,5 PBEG ,6 39,8 00,0-54,5 45,0 9,5 PBEG ,5 48,73 08,0-54,5 45,0 9,5 PBEG ,43 57,64 8,0-54,5 5,0 3,5 PBEG ,35 66,55 6,0-54,5 5,0 3,5 PBEG ,6 75,46 35,0-54,5 5,0 3,5 PBEG ,63 88,83 48,0-54,5 5,0 3,5 PBEG ,54 97,75 58,0-54,5 5,0 3,5 PBEG ,9, 7,0-54,5 5,0 3,5 PBEG ,8 0,03 80,0 50,0 54,5 5,0 3,5 PBEG ,56 46,77 07,0 50,0 54,5 5,0 3,5 PBEG ,39 64,59 5,0 50,0 54,5 5,0 3,5 PBEG ,76 77,96 38,0 50,0 54,5 5,0 3,5 PBEG ,4 33,6 74,0 50,0 54,5 5,0 3,5 PBEG ,4 33,44 9,0 50,0 54,5 5,0 3,5 PBEG ,5 353,7 34,0 50,0 54,5 5,0 3,5 PBEG ,08 398,9 358,0 80,0 54,5 5,0 3,5 PBEG , 496,33 456,0 80,0 54,5 5,0 3,5 PBEG ,9 6, 58,0 00,0 54,5 5,0 3,5 PBEG ,69 745,89 706,0 00,0 54,5 5,0 3,5 4M G400 TIMING PuLLE - PBE G400 = spheroial cast iron - = grey cast iron Pulleys an components 75
9 Dimensions of timing pulleys EAGLE - mounting taper bushing E-IT Orange O - belt with = 70 mm 4M Coe Taper bushing E-IT â PBEO ,78,99 86,0-7,0 45,0 7,0 PBEO ,69 30,90 90,0-7,0 45,0 7,0 PBEO ,6 39,8 00,0-7,0 45,0 7,0 PBEO ,5 48,73-35,5 7,0 76,0 4,0 PBEO ,43 57,64-44,0 7,0 76,0 4,0 PBEO ,35 66,55-53,0 7,0 76,0 4,0 PBEO ,6 75,46-6,0 7,0 76,0 4,0 PBEO ,63 88,83-74,0 7,0 89,0 7,0 PBEO ,54 97,75-83,0 7,0 89,0 7,0 PBEO ,9, - 97,0 7,0 89,0 7,0 PBEO ,8 0,03-05,0 7,0 89,0 7,0 PBEO ,56 46,77-30,0 7,0 89,0 7,0 PBEO ,39 64,59 5,0 50,0 7,0 76,0 4,0 PBEO ,76 77,96 38,0 50,0 7,0 76,0 4,0 PBEO ,4 33,6 74,0 50,0 7,0 76,0 4,0 PBEO ,4 33,44 9,0 80,0 7,0 89,0 7,0 PBEO ,5 353,7 34,0 80,0 7,0 89,0 7,0 PBEO ,08 398,9 358,0 00,0 7,0 89,0 7,0 PBEO , 496,33 456,0 00,0 7,0 89,0 7,0 PBEO ,9 6, 58,0 0,0 7,0 89,0 7,0 PBEO ,69 745,89 706,0 0,0 7,0 89,0 7,0 G400 = spheroial cast iron - = grey cast iron G Pulleys an components
10 Dimensions of timing pulleys EAGLE - mounting taper bushing E-IT e - belt with = 05 mm Coe Taper bushing E-IT â PBE ,78,99 86,0-07,0 45,0 3,0 PBE ,69 30,90 90,0-07,0 45,0 3,0 PBE ,6 39,8 00,0-07,0 45,0 3,0 PBE ,5 48,73 09,0-07,0 76,0 5,5 PBE ,43 57,64 7,0-07,0 76,0 5,5 PBE ,35 66,55 6,0-07,0 76,0 5,5 PBE ,6 75,46 35,0-07,0 76,0 5,5 PBE ,63 88,83 48,0-07,0 89,0 8,0 PBE ,54 97,75 57,0-07,0 89,0 8,0 PBE ,9, 7,0-07,0 0,0 5,0 PBE ,8 0,03 80,0-07,0 0,0 5,0 PBE ,56 46,77 06,0-07,0 0,0 5,0 PBE ,39 64,59 5,0 80,0 07,0 89,0 8,0 PBE ,76 77,96 38,0 80,0 07,0 89,0 8,0 PBE ,4 33,6 74,0 00,0 07,0 0,0 5,0 PBE ,4 33,44 9,0 00,0 07,0 0,0 5,0 PBE ,5 353,7 34,0 00,0 07,0 0,0 5,0 PBE ,08 398,9 358,0 0,0 07,0 0,0 5,0 PBE , 496,33 456,0 0,0 07,0 0,0 5,0 PBE ,9 6, 58,0 40,0 07,0 7,0 0,0 PBE ,69 745,89 706,0 40,0 07,0 7,0 0,0 4M G400 3 TIMING PuLLE - PBE G400 = spheroial cast iron - = grey cast iron Pulleys an components 77
11 Dimensions of timing pulleys EAGLE - soli hub aluminum type Part Number PE5M 6-5 -MPB EAGLE timing pulley - soli hub Belt with Number of teeth oli hub PE5M - belt with,5 mm 5M Coe PE5M,5-5-MP 5 3,87,9-7,0 6,0 3,5 9,5 6,0 PE5M,5-6-MP 6 5,47 4,5-9,0 6,0 3,5 9,5 6,0 PE5M,5-8-MP 8 8,65 7,69 -,0 6,0 3,5 9,5 6,0 PE5M,5-9-MP 9 30,3 9,7-4,0 6,0 3,5,5 8,0 PE5M,5-0-MP 0 3,83 30,87-5,0 6,0 3,5,5 8,0 PE5M,5--MP 35,0 34,05-8,0 6,0 3,5,5 8,0 PE5M,5-4-MP 4 38,9 37,3-3,0 6,0 3,5,5 8,0 PE5M,5-5-MP 5 39,79 38,83-33,0 6,0 3,5,5 8,0 PE5M,5-6-MP 6 4,38 40,4-35,0 6,0 3,5,5 8,0 PE5M,5-7-MP 7 4,97 4,0-36,0 6,0 3,5,5 8,0 PE5M,5-8-MP 8 44,56 43,60-38,0 6,0 3,5,5 8,0 PE5M,5-30-MP 30 47,75 46,79-4,0,7 3,5,5 8,0 PE5M,5-3-MP 3 50,93 49,97-44,0,7 3,5,5 8,0 PE5M,5-36-MP 36 57,30 56,34-5,0,7 3,5,5 8,0 PE5M,5-40-MP 40 63,66 6,70-57,0,7 3,5 4,5,0 PE5M,5-44-MP 44 70,03 69,07-63,0,7 3,5 4,5,0 PE5M,5-48-MP 48 76,39 75,43-70,0,7 3,5 4,5,0 PE5M,5-60-MP 60 95,49 94,53-89,0,7 3,5 4,5,0 aluminum 8 PE5M - belt with 5 mm 5M Coe PE5M5-5-MPB 5 3,87,9-7,0 6,0 6,0 3,0 6,0 PE5M5-6-MPB 6 5,47 4,5-9,0 6,0 6,0 3,0 6,0 PE5M5-8-MPB 8 8,65 7,69 -,0 6,0 6,0 3,0 6,0 PE5M5-9-MPB 9 30,3 9,7-4,0 6,0 6,0 34,0 8,0 PE5M5-0-MPB 0 3,83 30,87-5,0 6,0 6,0 34,0 8,0 PE5M5--MPB 35,0 34,05-8,0 6,0 6,0 34,0 8,0 PE5M5-4-MPB 4 38,9 37,3-3,0 6,0 6,0 34,0 8,0 PE5M5-5-MPB 5 39,79 38,83-33,0 6,0 6,0 34,0 8,0 PE5M5-6-MPB 6 4,38 40,4-35,0 6,0 6,0 34,0 8,0 PE5M5-7-MPB 7 4,97 4,0-36,0 6,0 6,0 34,0 8,0 PE5M5-8-MPB 8 44,56 43,60-38,0 6,0 6,0 34,0 8,0 PE5M5-30-MPB 30 47,75 46,79-4,0,7 6,0 34,0 8,0 PE5M5-3-MPB 3 50,93 49,97-44,0,7 6,0 34,0 8,0 PE5M5-36-MPB 36 57,30 56,34-5,0,7 6,0 34,0 8,0 PE5M5-40-MPB 40 63,66 6,70-57,0,7 6,0 37,0,0 PE5M5-44-MPB 44 70,03 69,07-63,0,7 6,0 37,0,0 PE5M5-48-MPB 48 76,39 75,43-70,0,7 6,0 37,0,0 PE5M5-60-MPB 60 95,49 94,53-89,0,7 6,0 37,0,0 aluminum 78 Pulleys an components
12 Dimensions of timing pulleys EAGLE - soli hub aluminum type Part Number EAGLE timing pulley - soli hub Belt with Number of teeth oli hub PE M -0 -MPB TIMING PuLLE - PE PEM - belt with 5 mm 8M Coe PEM-0-MPB 0 50,93 49,55 4,0,7 6,0 38,0,0 7,0 PEM--MPB 56,0 54,64 46,0,7 6,0 38,0,0 3,0 PEM-4-MPB 4 6, 59,74 5,0,7 6,0 4,0 6,0 34,0 PEM-6-MPB 6 66, 64,83 58,0,7 6,0 4,0 6,0 39,0 PEM-8-MPB 8 7,30 69,9 6,0,7 6,0 4,0 6,0 4,0 PEM-30-MPB 30 76,39 75,0 67,0,7 6,0 4,0 6,0 45,0 PEM-3-MPB 3 8,49 80, 7,0,7 6,0 4,0 6,0 48,0 PEM-34-MPB 34 86,58 85,0 77,0,7 6,0 4,0 6,0 5,0 PEM-36-MPB 36 9,67 90,9 8,0,7 6,0 4,0 6,0 55,0 PEM-38-MPB 38 96,77 95,39 87,0,7 6,0 4,0 6,0 58,0 PEM-40-MPB 40 0,86 00,48 9,0,7 6,0 4,0 6,0 6,0 PEM-56-MPB 56 4,60 4, 33,0,7 6,0 4,0 6,0 89,0 PEM-90-MPB 90 9,8 7,80 0,0 5,4 6,0 4,0 6,0 80,0 aluminum 8 PEL - belt with 50 mm 8M Coe 8 PEL-0-MPB 0 50,93 49,55 4,0,7 5,0 63,0,0 7,0 PEL--MPB 56,0 54,64 46,0,7 5,0 63,0,0 3,0 PEL-4-MPB 4 6, 59,74 5,0,7 5,0 67,0 6,0 34,0 PEL-6-MPB 6 66, 64,83 58,0,7 5,0 67,0 6,0 39,0 PEL-8-MPB 8 7,30 69,9 6,0,7 5,0 67,0 6,0 4,0 PEL-30-MPB 30 76,39 75,0 67,0,7 5,0 67,0 6,0 45,0 PEL-3-MPB 3 8,49 80, 7,0,7 5,0 67,0 6,0 48,0 PEL-34-MPB 34 86,58 85,0 77,0,7 5,0 67,0 6,0 5,0 PEL-36-MPB 36 9,67 90,9 8,0,7 5,0 67,0 6,0 55,0 PEL-38-MPB 38 96,77 95,39 87,0,7 5,0 67,0 6,0 58,0 PEL-40-MPB 40 0,86 00,48 8,0,7 5,0 67,0 6,0 6,0 PEL-56-MPB 56 4,60 4, 33,0,7 5,0 67,0 6,0 89,0 PEL-90-MPB 90 9,8 7,80 0,0 5,4 5,0 67,0 6,0 80,0 aluminum Pulleys an components 79
13 Dimensions of timing pulleys EAGLE - soli hub aluminum type Part Number PE0M 5-5 -MPB EAGLE timing pulley - soli hub Belt with Number of teeth oli hub PE0M - belt with 5 mm 0M Coe PE0M5-5-MPB 5 47,75 45,75-35,0,70 6,0 36,0 0,0 3,0 PE0M5-6-MPB 6 50,93 48,93-38,0,70 6,0 36,0 0,0 5,0 PE0M5-8-MPB 8 57,30 55,30-44,0,70 6,0 36,0 0,0 30,0 PE0M5-9-MPB 9 60,48 58,48-47,0,70 6,0 36,0 0,0 3,0 PE0M5-0-MPB 0 63,66 6,66-5,0,70 6,0 36,0 0,0 34,0 8 PE0M5--MPB 70,03 68,03-57,0,70 6,0 36,0 0,0 38,0 PE0M5-4-MPB 4 76,39 74,39-63,0,70 6,0 36,0 0,0 4,0 PE0M5-5-MPB 5 79,58 77,58-67,0,70 6,0 36,0 0,0 44,0 PE0M5-6-MPB 6 8,76 80,76-70,0,70 6,0 36,0 0,0 47,0 PE0M5-7-MPB 7 85,94 83,94-73,0,70 6,0 36,0 0,0 49,0 PE0M5-8-MPB 8 89,3 87,3-76,0,70 6,0 36,0 0,0 5,0 PE0M5-30-MPB 30 95,49 93,49-8,0,70 6,0 36,0 0,0 55,0 aluminum PE0M5-3-MPB 3 0,86 99,86-89,0,70 6,0 36,0 0,0 59,0 PE0M5-36-MPB 36 4,59,59-0,0,70 6,0 36,0 0,0 68,0 PE0M5-40-MPB 40 7,3 5,3-4,0,70 6,0 36,0 0,0 76,0 PE0M5-44-MPB 44 40,06 38,06-7,0,70 6,0 36,0 0,0 85,0 PE0M5-48-MPB 48 5,79 50,79-40,0,70 6,0 36,0 0,0 93,0 PE0M5-60-MPB 60 90,99 88,99 6,0 0,0 5,40 6,0 36,0 0,0 65,0 8 PE0M - belt with 3 mm 0M Coe PE0M3-5-MPB 5 47,75 45,75-35,0,70 33,0 43,0 0,0 3,0 PE0M3-6-MPB 6 50,93 48,93-38,0,70 33,0 43,0 0,0 5,0 PE0M3-8-MPB 8 57,30 55,30-44,0,70 33,0 43,0 0,0 30,0 PE0M3-9-MPB 9 60,48 58,48-47,0,70 33,0 43,0 0,0 3,0 PE0M3-0-MPB 0 63,66 6,66-5,0,70 33,0 43,0 0,0 34,0 PE0M3--MPB 70,03 68,03-57,0,70 33,0 43,0 0,0 38,0 PE0M3-4-MPB 4 76,39 74,39-63,0,70 33,0 43,0 0,0 4,0 PE0M3-5-MPB 5 79,58 77,58-67,0,70 33,0 43,0 0,0 44,0 PE0M3-6-MPB 6 8,76 80,76-70,0,70 33,0 43,0 0,0 47,0 PE0M3-7-MPB 7 85,94 83,94-73,0,70 33,0 43,0 0,0 49,0 PE0M3-8-MPB 8 89,3 87,3-76,0,70 33,0 43,0 0,0 5,0 aluminum PE0M3-30-MPB 30 95,49 93,49-8,0,70 33,0 43,0 0,0 55,0 PE0M3-3-MPB 3 0,86 99,86-89,0,70 33,0 43,0 0,0 59,0 PE0M3-36-MPB 36 4,59,59-0,0,70 33,0 43,0 0,0 68,0 PE0M3-40-MPB 40 7,3 5,3-4,0,70 33,0 43,0 0,0 76,0 PE0M3-44-MPB 44 40,06 38,06-7,0,70 33,0 43,0 0,0 85,0 PE0M3-48-MPB 48 5,79 50,79-40,0,70 33,0 43,0 0,0 93,0 PE0M3-60-MPB 60 90,99 88,99 6,0 78,0 5,40 33,0 43,0 0,0 05,0 80 Pulleys an components
14 Dimensions of timing pulleys EAGLE - soli hub aluminum type 8 TIMING PuLLE - PE PE0M - belt with 50 mm 0M Coe PE0M50-5-MPB 5 47,75 45,75-35,0,70 5,0 6,0 0,0 3,0 PE0M50-6-MPB 6 50,93 48,93-38,0,70 5,0 6,0 0,0 5,0 PE0M50-8-MPB 8 57,30 55,30-44,0,70 5,0 6,0 0,0 30,0 PE0M50-9-MPB 9 60,48 58,48-47,0,70 5,0 6,0 0,0 3,0 PE0M50-0-MPB 0 63,66 6,66-5,0,70 5,0 6,0 0,0 34,0 PE0M50--MPB 70,03 68,03-57,0,70 5,0 6,0 0,0 38,0 PE0M50-4-MPB 4 76,39 74,39-63,0,70 5,0 6,0 0,0 4,0 PE0M50-5-MPB 5 79,58 77,58-67,0,70 5,0 6,0 0,0 44,0 PE0M50-6-MPB 6 8,76 80,76-70,0,70 5,0 6,0 0,0 47,0 PE0M50-7-MPB 7 85,94 83,94-73,0,70 5,0 6,0 0,0 49,0 PE0M50-8-MPB 8 89,3 87,3-76,0,70 5,0 6,0 0,0 5,0 aluminum 8 PE0M50-30-MPB 30 95,49 93,49-8,0,70 5,0 6,0 0,0 55,0 PE0M50-3-MPB 3 0,86 99,86-89,0,70 5,0 6,0 0,0 59,0 PE0M50-36-MPB 36 4,59,59-0,0,70 5,0 6,0 0,0 68,0 PE0M50-40-MPB 40 7,3 5,3-4,0,70 5,0 6,0 0,0 76,0 PE0M50-44-MPB 44 40,06 38,06-7,0,70 5,0 6,0 0,0 85,0 PE0M50-48-MPB 48 5,79 50,79-40,0,70 5,0 6,0 0,0 93,0 PE0M50-60-MPB 60 90,99 88,99 6,0 78,0 5,40 5,0 6,0 0,0 05,0 Pulleys an components 8
Appearance Sensing distance Output configuration Operation mode Model NO E2EQ-X7D1 2M
Spatter-resistant Proximity Sensor EEQ CSM_EEQ_DS_E Spatter-resistant Fluororesincoate Proximity Sensor Superior spatter resistance. Long Sensing-istance s ae for sensing istances up to mm. Pre-wire Smartclick
Appearance Sensing distance Output configuration Operation mode Model. Appearance Sensing distance Output configuration Operation mode Model
Spatter-resistant Proximity Sensor EEQ CSM_EEQ_DS_E Spatter-resistant Fluororesincoate Proximity Sensor Superior spatter resistance. Long Sensing-istance s ae for sensing istances up to mm. Pre-wire Smartclick
CNC TOOL HOLDERS GAUGING PRODUCTS
we hol our promise CNC TOOL HOLERS GUGING PROUCTS INNOVTION I PERFORMNCE I QULITY www.bilzusa.com BILZ FIT FOR FOR THE THE FUTURE FUTURE TPPING (MQL) MINIMUM QUNTITY LUBRICNT INUCTION SHRINK-FIT SYSTEM
Appearance Sensing distance Output configuration Operation mode Model. Appearance Sensing distance Output configuration Operation mode Model
Spatter-resistant Proximity Sensor EEQ CSM_EEQ_DS_E Spatter-resistant Fluororesincoate Proximity Sensor Superior spatter resistance. Long Sensing-istance s ae for sensing istances up to mm. DC -Wire s.
E2EQ-X10D1-M1TGJ 0.3M
Spatter-resistant Proximity Sensor EEQ CSM_EEQ_DS_E_9_ Spatter-resistant Fluororesincoate Proximity Sensor Superior spatter resistance. Long Sensing-istance s ae for sensing istances up to mm. Pre-wire
micrun Switzerland TIR of 3 µm ( ) at 3 Diameters assembled Made in Swiss Precision Tools
micrun TIR of 3 µm (0.0001 ) at 3 Diameters assemble Mae in Switzerlan Swiss Swiss MR What is micrun The micrun system is a new prouct esigne for high spee an high accuracy machining applications. A specially
E2EM-X4X1 2M *2 E2EM-X4X2 2M Shielded E2EM-X8X1 2M *2 E2EM-X8X2 2M *1 M30 15 mm E2EM-X15X1 2M *2 E2EM-X15X2 2M
Long-istance Proximity Sensor EEM CSM_EEM_DS_E_7_ Long-istance Proximity Sensor Long-istance etection at up to mm enables secure mounting with reuce problems ue to workpiece collisions. No polarity for
E2EM-X4X1 2M *2 E2EM-X4X2 2M Shielded E2EM-X8X1 2M *2 E2EM-X8X2 2M *1 M30 15 mm E2EM-X15X1 2M *2 E2EM-X15X2 2M
Long-istance Proximity Sensor EEM CSM_EEM_DS_E Long-istance Proximity Sensor Long-istance etection at up to mm enables secure mounting with reuce problems ue to workpiece collisions. No polarity for easy
SRAM G8 / G9 IGH 2015 Frame Fit Specifications
SRAM G8 / G9 IGH 2015 Frame Fit Specifications This document is intended to communicate general frame fit guidelines for SRAM Internal Gear Hubs. For additional information, please contact your SRAM representative.
Model Operation mode TL-W5MD1 2M *2 TL-W5MD2 2M *2 TL-W1R5MC1 2M *1 TL-W3MC1 2M. DC 3-wire, NPN TL-W5MC1 2M TL-W20ME1 2M *1 TL-W20ME2 2M *1
Flat Inuctive CSM DS_E Stanar Flat s in Many Different Variations Only mm thick yet provies a sensing istance of mm (MC). ie-cast moels also available. Be sure to rea Safety Precautions on page 7. Orering
MULTI-V FUL-GRIP SHEAVES AND BUSHINGS FUL-GRIP (QD) BUSHINGS FUL-GRIP (QD) SHEAVES STANDARD MULTI-V SHEAVES SPECIAL MADE-TO-ORDER SHEAVES
MULTI-V FUL-GRIP SHEAVES AND BUSHINGS FUL-GRIP (QD) BUSHINGS FUL-GRIP (QD) SHEAVES STANDARD MULTI-V SHEAVES SPECIAL MADE-TO-ORDER SHEAVES Industry puts Maurey sheaves on more drives every year simply because
YE-CT15 EUROPE SPIRAL FLUTE GUN POINT
YE-CT15 EUROE SIRA FUTE GUN OINT SIRA FUTE / SIRA OINT SIRA FUTE / SIRA OINT HEA OFFICE 211, SEWOCHEON-RO, BUYEONG-GU, INCHEON, KOREA HONE : +82-32-526-0909, FAX : +82-32-526-4373 Http://www.yg1.r E-mail:
YE-CT13 EUROPE SPIRAL FLUTE / SPIRAL POINT. New Edition
SIRA FUTE GUN OINT SIRA FUTE / SIRA OINT YE-CT13 EUROE New Eition SIRA FUTE / SIRA OINT HEA OFFICE 68, Cheongcheon-ong, Bupyeong-Gu, Incheon 3-030, KOREA HONE :+82--526-0909, FAX:+82--526-4373 Http://www.yg1.r
ICB12, ICB18 and ICB30 4-wire DC DS ENG
Proximity inuctive sensors with complementary output function escription enefits complete family. vailable in M12, M18 an M30 housings with an operating istance from 2 to 22 mm. Less machine owntime. Lower
DOUBLE-SINGLE SPROCKETS
DOUE-SINGE SPROCKETS Double-Single Double-Single Taper-ushe 0 05 DOUE-SINGE SPROCKETS Double-Single H - Denotes harene teeth. T pp. Wt. DS0 DS50 DS60 DS0 DS00 5 6 7 9 0 5 6 7 9 0 5 6 7 9 0 5 6 7 9 0 5
PRODUCT RANGE. GIS and Transformer Connectors
PRODUCT RANGE GIS an Transformer Connectors 1 GIS an Transformer Connectors Connector Components The single-piece prefabricate Click-Fit fiel boy (II) connects the cable plug (III) to the socket (I) an
Metric Star Coupling (Plastic "Star" Ring)
Metric Star oupling (Plastic "Star" Ring) H H Finished ore* H H d d Series Max. Max. F / / / 0 7 H Small Hub M 0 H Large Hub M N S L R 0. 7 0 7. / / /0 0 0 0 7 7 0. 0. 0 / /7 7/0 7 7 0 7 0 0 0. 0 Series
Engineering Class Chain and Sprockets
sec_09_ 11/18/08 2:55 PM Page 88 ngineering lass hain an Sprockets eavy-uty poer transmission applications require tough, long-lasting chains an sprockets. Renol Jeffrey has the experience an the expertise
<?8H; :?I9I 7FFB?97J?EDI C7HA;JI </-' =H;;DBOJ; FBKI <;7JKH;I 8;D;<?JI </-+ =H;;DBOJ; <;7JKH;I 8;D;<?JI 9eWj[Z 7XhWi_l[i
PLUS PLUS 100 FIBRE DISCS F228 FERR. & NON- FERR. FEATURES Tough versatile aluminium oxide abrasive 0.8mm fibre backing BENEFITS Fast initial cut Ideal for general purpose metal applications MAXIMUM OPERATING
Model Operation mode. TL-Q2MC1 DC 3-wire, NPN TL-Q5MC1 *2 TL-Q5MC2. DC 3-wire, NPN TL-G3D-3
Rectangular Stanar Proximity TL-N/TL-Q/TL-G A Wealth of Moels for All Types of Applications Easy installation, high-spee pulse generator, high-spee rotation control, an more. Direct mounte to metal (-N
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
Stock HTS Sprockets. HTS Sprockets. HTS High Torque Sprockets. Features of HTS Drives
HTS Sprockets Features of HTS Drives Positive Slip Proof Engagement Wide Speed Range Constant Driven Speeds Wide Range of Load Capabilities No Lubrication High Tension Eliminated High Mechanical Efficiency
The supporting roller has the thick-wall outer ring, by. Cylindrical Roller Bearing
0 ylinrical Roller earing The supporting roller has the thick-wall outer ring, by which the roller can be rolle irectly at the rollway an withstan the large loa. The supporting rollers mae by our company
Boring Bits with Parallel Shank HW Z2 V2 RH. Saw Blades. Jig. & Knives. Power Tools. Bits for Hand.
abre & ets owel rills Boring Bits with Parallel hank 50 513 514 15 120 13 513.150.11 16 120 13 513.160.11 18 120 13 513.180.11 20 120 13 513.200.11 22 125 13 513.220.11 25 125 13 513.250.11 26 125 13 513.260.11
Chain. Grade 10 Grade 8 Short Link Mid-link Long-link
Chain Grae 10 Grae 8 Short Link Mi-link Long-link Chain Chain, Grae 10 (200), GrabiQ 5:3 Chain, Grae 10 (400), GrabiQ 5:3 Chain, Short Link, Grae 8, Classic 5:3 Chain, Short Link, Grae 8 5:4 Chain, Mi-link,
Gripper and vacuum technology Vacuum suction grippers Series SGN. Brochure
ripper an vacuum technology Vacuum suction grippers Brochure 2 ripper an vacuum technology Vacuum suction grippers F = 1.5-35 N external iameter: 6.3-30 mm external threa 3 F = 1.5-35 N external iameter:
HUJ UNIVERSAL JOINTS HITEX UNIVERSAL JOINTS
HUJ UNIVERSAL JOINTS HITEX UNIVERSAL JOINTS UNIVERSAL JOINTS Specifications Suitale up to a maximum spee of 1.000 rpm Maximum articulation L 1 L 1 L1 L1 L3 Type G, single joint Type G, oule joint G to
TABLE OF CONTENTS V-PULLEYS V-PULLEYS FINISHED BORE AK AK...26 BK BK...28 TAPER BORE STL/H AK-H AK-H...31 BK-H BK-H...
V-UYS STION & INDX SON V-UYS are available in two configurations: finished (fixed) bore taper bore for ST and QT style. TAB O ONTNTS V-UYS INISHD BOR A...25 2A...26 B...27 2B...28 TAR BOR ST/H A-H...29
ABSOLUTE ROTARY ENCODER SINGLE-TURN BIT PARALLEL
ABSOUTE ROTARY ENCODER Main Features - Compact and Heavy-Duty Industrial Model - Interface: Bit-parallel, Push Pull Short Circuit Proof - Housing: 58 mm - Shaft: 6 or 10 mm, Hub- 15 mm - Resolution: max.
Tool holder for rigid tapping Accessories MGT Set Screw MGT6SS MGT12SS CATALOG No. MGT20SS Synchro Adjuster Compensates
Tool holer for rigi tapping icense CATAOG No. Compensates for synchronization errors uring rigi tapping Improves threa quality an tool life by reucing thrust loas cause by synchronization errors up to
PRELIMINARY EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER ORDERING CODE BIT PARALLEL
EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
media:scape kiosk with HDVC Integration with 32" Display and Small CODEC
Power Power Camera Vieo Cable 32" TV CODEC CODEC ata sharing input CODEC vieo output Switcher Cables inclue Cables not inclue Scaler Switcher sens signal from PUCKs to Display(s) PUCKs sen signal to Switcher
YOUR COMPLETE SOURCE FOR. Gear Reducers Couplings & Linear Mount Products. Product Range. GAM Can.
YOUR COMPLETE SOURCE FOR Gear Reducers Couplings & Product Range Linear Mount Products GAM Can. YOUR COMPLETE SOURCE FOR GEAR REDUCERS, COUPLINGS & LINEAR MOUNT PRODUCTS Product Selection Guide Gear Reducers
3000 series Premium Hall effect joysticks
The 3000 Series is the very latest generation in high precision contactless joysticks. With a class leading installed depth of
Contents. Page 2 TRCTFP101
Contents CHAINS SPZ-SPA-SPB-SPC Profile Selection 3 Taper Bore SPZ 4-7 Taper Bore SPA 8-10 Taper Bore SPB 11-14 Taper Bore SPC 15-17 Taper Bushes 18-19 Taper Bushes - Metric 20-23 Taper Bushes - Imperial
18W Triple 35W T4.5 G8.5 Halogen T10 100W
BLITZ 182 BLITZ BLITZ is a very versatile fixture. With a choice of one to four windows, the BLITZ can be striking even when used singly, however, the combination of choice of optic and dichroic colored
NK Bits exclusively for air and electric screwdrivers!
Cat.NO.-10b NKBI NK Bits exclusively for air an electric screwrivers! Fit in most screwrivers with wie variety of bit types & sizes prouce uner tight quality control. NKBI he "NK Bits" best fit for pneumatic
one pulse per 360 degree rotation accuracy 0.25 degrees
date 07/18/2014 page 1 of 8 SERIES: AMT10 DESCRIPTION: MODULAR INCREMENTAL ENCODER FEATURES patented capacitive ASIC technology low power consumption CMOS outputs 16 DIP switch selectable resolutions index
Quick Reference Catalog. Offering the Broadest Product Line in the
Quick Reference Catalog Offering the Broadest Product Line in the Special Bus Application with 1.22" Bolt 10-Hole, 11 ¼" Bolt Circle 8.66" Bore 15 O Tubeless Aluminum Wheel, Special Bus Application with
Computer Organization
Computer Organization Douglas Comer Computer Science Department Purue University 250 N. University Street West Lafayette, IN 47907-2066 http://www.cs.purue.eu/people/comer Copyright 2006. All rights reserve.
Standard Trackstar material. FDA/USDA approved material. Improved wear resistance and reduced thermal expansion Available in all colors except white
2 The Advantage Fight friction and reduce costs with long-wearing Trackstar UHMW Belt and Chain Guides. Available from stock, Fenner Drives offers the widest range of standard profiles for use in guiding
Loop Scheduling and Partitions for Hiding Memory Latencies
Loop Scheuling an Partitions for Hiing Memory Latencies Fei Chen Ewin Hsing-Mean Sha Dept. of Computer Science an Engineering University of Notre Dame Notre Dame, IN 46556 Email: fchen,esha @cse.n.eu Tel:
Data Sheet MEM 22. Absolute Encoder Multiturn
Absolute Encoder Multiturn Features Resolution: Singleturn: up to 16,384 (14 Bit) steps per revolution Multiturn: up to 16,777,216 (24 Bit) revolutions Interface: SSI (synchron serial interface) or BiSS
On Request Shank Dia 3mm RECOMMENDED PARAMETERS FOR ROUTING ALUMINIUM PCB
F ALUMINIUM ROUTER P0 IMS D : Ø 1/" (.17 ) Coon Shank On Request Shank Dia.00 ø.00.00 On request : Inch sizes / Specia imensions : Non stock items / Artices RECOMMENDED PARAMETERS FOR ROUTING ALUMINIUM
Overall Dimensions AE2M-1000 MADJ MW(X)CBLKMP 1000-MPBM. For Reference Only
AE2M-1000 MADJ MW(X)CBLKMP (Fixture Series) Overall Dimensions Optic Assembly 1000-MPBM (Remote Ballast Series) Weight Remote Ballast 65 lbs (29.48 kgs) For Reference Only The Arena Eclipse blackout luminaire
3000 series Premium Hall effect joysticks
Distinctive features and specifications Class leading installed depth
Absolute Encoder Multiturn
Absolute Encoder Multiturn Features Resolution: Singleturn: up to 16,384 (14 Bit) steps per revolution Multiturn: up to 16,777,216 (24 Bit) revolutions Interface: SSI (synchron serial interface) or BiSS
ELECTRONIC SCALE WB-380. Instruction manual
ELECTRONIC SCALE WB-380 Instruction manual Temperature Range for Use : 5 C 35 C Relative Humiity : 30% 80% (without conensation) Temperature Range of Environment :
Unit 15. Building Wide Muxes. Building Wide Muxes. Common Hardware Components WIDE MUXES
5. 5.2 Unit 5 Common Harware Components WIE MUXE 5.3 5.4 Builing Wie Muxes Builing Wie Muxes o far muxesonly have single bit inputs I is only -bit I is only -bit What if we still want to select between
PRESSURE RELIEF DEVICE ORDERING SPECIFICATIONS.
MESSKO MPreC PRESSURE RELIEF DEVICE ORDERING SPECIFICATIONS. MESSKO MPreC -Series LARGE MESSKO PRESSURE RELIEF DEVICE (LMPRD) Operating pressure Project/Reference: Gasket material MPreC Typ 4 psi; 0.28
Incremental encoders Solid shaft with EURO flange B pulses per revolution
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse Features Size ø58 mm Precise optical sensing Output signal level TTL or HTL EURO flange B Connection axial,
ELECTRONIC PHYSICIAN SCALE WB-3000 INSTRUCTION MANUAL
ELECTRONIC PHYSICIAN SCALE WB-3000 INSTRUCTION MANUAL Please keep this manual in a safe place, an make sure it is reaily available whenever necessary. Please use this prouct only after carefully reaing
Section Content. Straight Curve Straight and Curve Spur Optional Equipment and Devices
Belt riven Live Roller onveyor Section ontent Straight urve Straight and urve Spur Optional quipment and evices P.O. Box 352 lpena, Michigan 49707 Phone 989.358.7000 Fax 989.358.7020 info@omni.com www.omni.com
RECOMMENDED PARAMETERS FOR ROUTING FR4
HIGH FEED DIAMOND ROUTER P0 P1 D : Ø 1/" (.17 ) Coon Shank On Request Shank Dia Ø.00 0* 0.0* 0.0 0.90* 1. * * 1.* 1.70*.0*.00.00.00.00.00.00.00 9.0* 9.0* * On request : Inch sizes / Specia imesions : Non
ODU-MINI-SNAP. Series S - IP50 and IP68 FP-Locking Concept Keying with Insulation Body. Series S
OU-MINI-SNAP Series S - IP and IP68 FP-Locking Concept Keying with Insulation Body Series S OU-MINI-SNAP Series S The Push-Pull Locking Principle: FP Locking roove Conical Sleeve Locking Fingers Outer
[1] involuteσ(spur and Helical Gear Design)
![[1] involuteσ(spur and Helical Gear Design)](/thumbs/82/86018000.jpg "[1] involuteσ(spur and Helical Gear Design)")
[1] involuteσ(spur and Helical Gear Design) 1.3 Software Content 1.3.1 Icon Button There are 12 icon buttons: [Dimension], [Tooth Form], [Accuracy], [Strength], [Sliding Graph], [Hertz Stress Graph], [FEM],
Equipment for Cutting, Chamfering, Peeling Plastic Pipe 373. SG 125 and MSE63/MSE110 Socket Fusion 390. GF 400 CNC Butt Fusion Machine 397
Table of contents Page place holer (elete page) 369 Equipment for Cutting, Chamfering, Peeling Plastic Pipe 373 Electro Plus & Accessories 380 MSA 250 & Accessories 382 MSA 330 & Accessories 384 MSA 340
[Type text] [Type text] [Type text] GearPro Procedure
![[Type text] [Type text] [Type text] GearPro Procedure](/thumbs/77/76062303.jpg "[Type text] [Type text] [Type text] GearPro Procedure")
GearPro Procedure Pictured below is the GearPro main screen. In this manual the icons on the top right corner (Chapter 1), far left side (Chapters 2-5), and far right side (Chapters 6&7) will be discussed.
Incremental Encoder with Hollow Shaft
Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines
MAX 13,300 RPM. C3 Ceramic: Z3 Zirconia Alumina: CONTAMINANT-FREE Iron, Sulfur, and Chlorine 0.1%
WHEEL SPECIFICATIONS ANALYSIS OF TYPICAL WHEEL SPECIFICATIONS Analysis of Typical Wheel Specifications MAX 13,300 RPM www.cgwcamel.com CGW Resin Bond Abrasive Types CGW Coated Abrasive Types A Dark Aluminum
SERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according
RK CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER (ANALOG OUTPUT OR START/STOP)
RK CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER (ANALOG OUTPUT OR START/STOP) Main characteristics Absolute transducer Strokes from 50 to 4000 (RK-_- -N/S) Digital output RS422 Start/Stop (RK-_-
2. Combination of eddy current inspection and imaging analysis
11th European Conference on Non-Destructive Testing (ECNDT 2014), October 6-10, 2014, Prague, Czech Republic Innovative Eddy Current Inspection on Lightweight Components More Info at Open Access Database
Electrical connection
IS 230 Foo & Beverage Inuctive switches Dimensione rawing Part No. 501 11727 20mm 10-30 V DC 100 Hz embee Slim an short cylinrical metal housing M30x1.5 V4A / AISI 316L stainless steel housing ECOLAB teste
Bearings & Seals. Contents
ontents Acetal, Plastic & Glass earings all earings earing Search Service ushes Flange earings eele earings O-Rings & Kits Pillow lock earings Plain earings Ro En earings Roller earings earings & Seals
Technical data. General specifications. Functional safety related parameters B 10d Electrical specifications Operating voltage U B
Model Number Cable pull rotary encoder with PROFI- NET interface Features Robust aluminum drum housing Drum travel when cable retracted using threaded spindle Bellows with steel tip Comprehensive accessories
CARD-EDGE CONNECTORS (AXC)
XC FOR PC OR TO PC OR CR-EGE CONNECTORS (XC) Solder-dip type with flange Solder-dip type without flange FETURES 1. Long insertion and removal life. Thanks to our original contact shape, low insertion force
Canon Powershot S200 Camera lens Replacement
Canon Powershot S200 Camera lens Replacement This guide will walk you through the process of removing the camera's lens for replacement. Written By: Joseph Melo Page 1 of 16 INTRODUCTION The lens is used
Box Fans.
Box Fans www.systemair.pt Structure Description MVE/MVENT The D covers an airflow range between m/h and.000 m/h, suitable for indoor and outdoor installation. The DD covers an airflow range between 0 m/h
Air Moving Solutions. axipal adjustable pitch airfoil fans
Air Moving Solutions. axipal adjustable pitch airfoil fans ATAD ATAB CATALOG AX210 December 2012 AdjustablePitch Models ATAD ATAB Model ATAD Arrangement 4 - Direct Drive The ATAD Adjustable Pitch Airfoil
9000 SERIES - CONTACTLESS JOYSTICKS ULTRA LOW PROFILE ONE, TWO, THREE AXIS WIDE VARIETY OF HANDLES
30.46 R 3. 0 0 2.10 O 20.99 O 26.20 O 27.31 O 29.43 APEM 9000 SERIES - CONTACTLESS JOYSTICKS ULTRA LOW PROFILE ONE, TWO, THREE AXIS WIDE VARIETY OF HANDLES HIGH EMC IMMUNITY 18 MONTH WARRANTY INFINITE
Data Sheet for Angle Sensors
ETS25 - R ETS25 - F Serial micro controller interface (SER) or Serial Peripheral Interface (SPI) available Versatile electrical connections on demand: Solder- or clamping terminals, flat ribbon or round
ActiveEdge- Hydraulic Pump Case Study
ActiveEdge- Hydraulic Pump Case Study Industry: Fluid Power Systems Component: Hydraulic Pump Component Material: Cast Iron Customer: Unknown Machine Spindle: HSK100 Completion Date: July 2015 Background
Modernisation package CAB 920
Easy and ergonomic operation with user guidance and correction instructions Clear and understandable dialogue screens on the TFT colour display with convenient touch-screen operation Interactive direct
IGU PRODUCT OVERVIEW IGU IGU RULES IGU EXTERIOR: DOUBLE AND TRIPLE PANE
IGU This guie explains the requirements an rules for esigning a SageGlass IGU an placing the pigtail. Consult SageGlass for special requests. PRODUCT OVERVIEW IGU When esigning an IGU, first take note
Spring Loaded Contacts
Spring Loaded Contacts Spring Probes ATE Test Probes Slim probes for automated testing Harwin supply a variety of Spring Probes, suitable for use on manual test jigs and automatic test equipment (ATE)
B-1 SLIDE GUIDE STROKE BALL SPLINE ROTARY BALL SPLINE BALL SPLINE TOPBALL PRODUCTS SLIDE BUSH SLIDE UNIT SLIDEROTARYBUSH STROKE BUSH SLIDE SHAFT
SLIDE GUIDE STROKE TOPBALL PRODUCTS SLIDE BUSH SLIDE UNIT B-1 The NB ball spline is a linear motion mechanism utilizing the rotational motion of ball elements. It can be used in a wide variety of applications
Data is only for informational purpose. All specifications are subject to change without notice.
MV Data is only for informational purpose. All specifications are subject to change without notice. 1 First in knife gate 2018-12-19 solutions issue 24 Knife gate valve MV Stafsjö s knife gate valve MV
Yet Another Parallel Hypothesis Search for Inverse Entailment Hiroyuki Nishiyama and Hayato Ohwada Faculty of Sci. and Tech. Tokyo University of Scien
Yet Another Parallel Hypothesis Search for Inverse Entailment Hiroyuki Nishiyama an Hayato Ohwaa Faculty of Sci. an Tech. Tokyo University of Science, 2641 Yamazaki, Noa-shi, CHIBA, 278-8510, Japan hiroyuki@rs.noa.tus.ac.jp,
9000 SERIES - CONTACTLESS JOYSTICKS ULTRA LOW PROFILE ONE, TWO, THREE AXIS WIDE VARIETY OF HANDLES
30.46 R 3. 0 0 2.10 O 20.99 O 26.20 O 27.31 O 29.43 APEM 9000 SERIES - CONTACTLESS JOYSTICKS ULTRA LOW PROFILE ONE, TWO, THREE AXIS WIDE VARIETY OF HANDLES HIGH EMC IMMUNITY 18 MONTH WARRANTY INFINITE
PO Box 132 Kingston Brisbane, Qld 4114 Australia Phone Driveshaft s - Couplers and Covers
LOWE Industries PO Box 132 Kingston Brisbane, Qld 4114 Australia www.kenlowe.com.au Phone 0411-699 535 Driveshaft s - Couplers and Covers ---- Dragster couplings (close coupled) ---- On most dragsters
Draw wire sensors, draw wire sensors for displacement, position
Draw wire sensors, draw wire sensors for displacement, position Sensors based on potentiometer and encoder, for industrial and OEM applications for measurement of lengths, stroke, displacement, position,
Vonk Choke Valve. Flow Control. Features and benefits. Product overview. Technical data. General applications. Model YCV (Y-Type body)
Flow Control Vonk choke valves provide superior performance in abrasive environments, precise flow control and ease of maintenance, delivering operational reliability in the most challenging applications.
SPEED & PROXIMITY Sensors
SPEED & PROXIMITY Sensors TABLE OF Contents ic Proximity Sensors MP Series MP0 Low-Profile MP00 Threaded Housing 5 MP005 007 Threaded Housing 6 MP0 Snap-Fit 7 MP02 Flange-Mount 8 MP2007 Threaded Housing
Product range. TM Butt fusion machines
Prouct range TM Butt fusion machines TM 160-315 ECO Butt fusion machine TM 160-315 ECO Machine complete Ï Flexible an user-frienly heating element butt fusion machine for fusion jointing PE, PP, PB an
STRUCTURE AND ADVANTAGES
The NB ball spline is a linear motion mechanism utilizing the rotational motion of ball elements. It can be used in a wide variety of applications including robotics and transport type equipment. STRUCTURE
Contact resistance : environmental class hermetic class
8525 eries pplications or all general purposes in civil aeronautical applications tandards N 93422 32 NL 5413 N 1599 M T1 list LN 2954 escription Light weight version of MIL 26482 eries II Intermateable
3M Stikit Systems. 3M Stikit Disc Cloth General Use. Abrasives. TECH TIP: Stikit Disc Finish Life Characteristics
3M Custom Woodworking Catalog 21 3M Stikit Systems Stikit Systems: Versatile, Convenient and Efficient A New Level of Productivity 3M manufactures a complete line of Stikit coated abrasives to handle your
ABSOLUTE OPTICAL ROTARY ENCODER SINGLETURN BIT PARALLEL
Main Features - Compact and Heavy-Duty Industrial Model - Interface: Bit Parallel, Push Pull, Short Circuit Proof Housing: 58 mm - Shaft: 6 or 10 mm hollow- 15 mm - Resolution: Max. 16 Bit = 65,56 Steps
NEW product. Large digital pressure sensor 31series. Easily viewable LCD dual displays. High level visibility with 3-color display.
NEW product No, NPPDF 6-01E Large digital sensor 31series SEU-31 Easily viewable LCD dual displays. igh level visibility with 3-color display 2-Color indications depending on output. Main display : Pressure
Chapter 9 Memory Management
Contents 1. Introuction 2. Computer-System Structures 3. Operating-System Structures 4. Processes 5. Threas 6. CPU Scheuling 7. Process Synchronization 8. Dealocks 9. Memory Management 10.Virtual Memory
Lift Up Floor Locks Multi-Directional Castor. W Series. M Series (full stainless steel) WHEELS & CASTORS
Lift Up Floor s Multi-Directional Castor K Series M Series O Series M Series (full stainless steel) W Series WHEELS & CASTORS WWW.SITECRAFT.COM.AU WHEELS & CASTORS Lift Up Floor s Used on warehouse trolleys,
NARROW PITCH (0.4 mm) CONNECTORS F4S SERIES
NARROW-PITCH, THIN AN SLIM CONNECTOR FOR BOAR-TO-FPC CONNECTION FEATURES 1. Space-saving (3.6 mm widthwise) The required space is smaller than our F4 series (40-contact type): 27% smaller, 38% smaller
Han PCB termination. Han-Fast Lock PCB adapter for Han DD PCB adapter for Han DDD module
Han termination Contents Page Han-Fast Lock... 20.11 adapter for Han DD... 20.13 adapter for Han DDD module... 20.16 adapter for Han 40 A Axial module... 20.18 adapter for Han E... 20.20 adapter for Han
UniLok Heat Shrinkable Rings
Minimum 5 Nominal 6 Supplied Recovered iameter Force (N) AHM0137-0031-0038-1.371 1.321 0.28 / 0.331 0.34 / 0.42 1.347 130 AHM0137-0031-0127-1.371 1.321 0.28 / 0.331 1.2 / 1.34 1.347 400 AHM0155-0041-0078-1.549
Presentation. Folders and Envelopes. Now present it with pride! You ve done the work
Presentation Folders and Envelopes You ve done the work Now present it with pride! 1325 South reek rive Suite 500 Houston, TX 77084 800-354-2739 Fax: 800-600-2739 www.apextax.com Envelopes and Folders
STEEL PIPE NIPPLES G1616 STANDARD BLACK STEEL NIPPLES ITEMS HIGHLIGHTED
STEEL PIPE NIPPLES Pipe PRICE Part No. Size Length EACH G1616 STANDARD BLACK STEEL NIPPLES G1616-0XC 1 8" Close $ 2.00 G1616-0X1.5 1 8" 1 1 2" 2.20 G1616-0X2 1 8" 2" 2.30 G1616-0X2.5 1 8" 2 1 2" 2.50 G1616-0X3
For full product information, visit Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page.
R Safety Light Curtains MP2100 MP2100 For full product information, visit www.sti.com. Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page. MiniProtect Light Curtains Resolution:
Long Range Camera Pan And Tilt System
Long Range Camera Pan And Tilt System The long range camera pan and tilt drive system shall consist of an integral, environmental, precise speed pan and tilt drive unit with continuous 360 rotation; integrated
CP Racks. Pinions. Table of Contents. Catalog Number of KHK Stock Gears. Pinions S SCP Pinions. Racks K RGCP 5-500
Table of ontents pecial haracteristics, oints of aution in electing and Using acks & inions... page 0 T Tapered inions. T Tapered acks... page 2. round pur ears... page 4 ()(D) round acks... page 4 pur