micrun Switzerland TIR of 3 µm ( ) at 3 Diameters assembled Made in Swiss Precision Tools
|
|
- Elaine Gregory
- 5 years ago
- Views:
Transcription
1 micrun TIR of 3 µm ( ) at 3 Diameters assemble Mae in Switzerlan Swiss
2 Swiss MR What is micrun The micrun system is a new prouct esigne for high spee an high accuracy machining applications. A specially esigne holer, collet an nut form an assembly that achieves TIR at 3 x D all while proviing inustry leaing clamping force. The patente system is an extension of REGO-FIX s long line of ER base proucts. Features Benefits Swiss Quality Mae in Switzerlan to ISO 9001/ISO % inspecte for accuracy. Marking an size (reuces collet selection errors). Traceability ot number is marke on all proucts for traceability throughout the entire manufacturing process. Holer T.I.R. < 1 μm Collet T.I.R < 2 μm System T.I.R < 3 μm at 3 iameters Nut Design Symmetrical esign without grooves or flats for quiet running. Special Hi-Q process for improve clamping forces Special threa esign to keep nut aligne with the holer for improve T.I.R, repeatability an rigiity. No collet ejector require Q+ Balancing 100% balance to lowest possible resiual imbalance. Vibration Dampening For best machining results. Matche Tooling System All REGO-FIX micrun proucts are to be assemble an use together. Using any other manufacurers prouct can an will result in a poor assembly. REGO-FIX.COM
3 MR Concentricity T.I.R. DIN 6499 / ISO MR micrun System Influence of Tool Run-out (T.I.R.) on Tool ife micrun-collet Tool ife ( %) Stanar-Collet / UP Collets Competitors From Clamping Range To DIN 6499/ ISO Form B x " (0.015mm) T.I.R. max. r MR " (0.003mm) Runout [Inch] Assembly Instructions DIN 6499 / ISO Collets MR Collet groove Assembling Instructions Insert groove of collet into eccentric ring of the clamping nut at the mark on the bottom of the nut. Push collet in the irection of the arrow until it clicks in place. Screw nut with collet onto toolholer. We recommen tightening the nut with a torque wrench. Mark on bottom Disassembly Instructions After the nut is unscrewe from the toolholer, press on the face of the collet while simultaneously pushing sieways on the back of the collet opposite the mark until it isengages from the clamping nut. Mark on bottom REGO-FIX.COM
4 Swiss MR MR Metric Collets MR DIN 6499 / ISO Clamping Capacity MR 11 MR 16 MR 25 MR 32 [Inch] MR Inch Collets Ø Clamping Capacity MR 11 MR 16 MR 25 MR 32 [inch] 1/8* /4* /8* /2* /4* REGO-FIX.COM
5 MR BT Holers BT MR MAS 403 D BT 30 / MR 11 x BT 30 / MR 11 x BT 30 / MR 16 x BT 30 / MR 16 x BT 30 / MR 16 x BT 30 / MR 25 x BT 30 / MR 25 x BT 30 / ER 32 x BT 40 / MR 11 x BT 40 / MR 16 x BT 40 / MR 16 x BT 40 / MR 25 x BT 40 / MR 25 x BT 40 / MR 32 x BT 40 / MR 32 x Cylinrical Extensions CY MR D CY 16 / MR 11 x CY 16 / MR 11 x CY 20 / MRM 16 x CY 20 / MRM 16 x REGO-FIX.COM
6 Swiss MR HSK-A Holers HSK-A MR DIN / ISO D HSK-A 32 / MRM 16 x HSK-A 32 / MRM 16 x HSK-A 40 / MR 16 x HSK-A 40 / MR 16 x HSK-A 40 / MR 25 x 080 H HSK-A 50 / MR 16 x 100 H HSK-A 50 / MR 25 x 080 H HSK-A 63 / MR 11 x HSK-A 63 / MR 16 x HSK-A 63 / MR 25 x HSK-A 63 / MR 32 x HSK-A 63 / MR 32 x HSK-E Holers HSK-E MR DIN / ISO D HSK-E 25 / MR 11 x HSK-E 25 / MRM 16 x HSK-E 32 / MR 11 x HSK-E 32 / MRM 16 x HSK-E 40 / MR 11 x HSK-E 40 / MR 11 x HSK-E 40 / MRM 16 x HSK-E 40 / MRM 16 x HSK-E 40 / MR 25 x HSK-E 50 / MR 16 x HSK-E 50 / MR 25 x REGO-FIX.COM
7 MR Wrenches MR Wrenches Wrench hanle 230mm long MR 11 roller bearing wrnech hea MR 16 roller bearing wrnech hea MR 16M roller bearing wrnech hea MR 25 roller bearing wrnech hea MR 32 roller bearing wrnech hea MR Stanar Nuts Nuts MR Hi-Q / MR Hi-Q / MR Hi-Q / MRM Hi-Q / MR Hi-Q / MR MR Coolant Nuts Hi-Q / MRC Hi-Q / MRMC Hi-Q / MRC Hi-Q / MRC REGO-FIX.COM
8 Swiss MR Swiss Automatic Tooling Other Proucts & Accessories Mae in Switzerlan Mae in Switzerlan Mae in Switzerlan Prouct Highlights 2014 Mae in Switzerlan Swiss REGO-FIX TOO CORPORATION 7752 Moller Roa Inianapolis, IN USA Toll Free: Phone: Fax: REGO-FIX Tool Corp. All rights reserve. CO /2014
CAPTO. Switzerland. Made in. Swiss Precision Tools
CAPTO Made in Switzerland Swiss Precision Tools REGO-FIX CAPTO Toolholders As a Certified Sandvik CAPTO manufacturer, REGO-FIX uses new state of the art measuring and grinding systems to create the most
More informationFeatures Benefits. Collets. Swiss Quality Made in Switzerland to ISO 9001/ISO Marking Type and size (reduced collet selection errors).
Swiss Precision Tools ER Features Benefits Swiss Quality Made in Switzerland to ISO 9001/ISO 14001. 1 1 Marking Type and size (reduced collet selection errors). Traceability Lot number marking on all products
More informationpowrgrip Switzerland Made in Swiss Precision Tools
powrgrip Made in Switzerland Swiss Precision Tools PG Safe, Precise, Cost-effective The REGO-FIX powrgrip is an extremely precise, safe, and cost-effective Press-Fit system, perfect for your high-speed,
More informationCNC TOOL HOLDERS GAUGING PRODUCTS
we hol our promise CNC TOOL HOLERS GUGING PROUCTS INNOVTION I PERFORMNCE I QULITY www.bilzusa.com BILZ FIT FOR FOR THE THE FUTURE FUTURE TPPING (MQL) MINIMUM QUNTITY LUBRICNT INUCTION SHRINK-FIT SYSTEM
More information7 Collet chucks. 7.3 Cylindrical collet chucks 7.13 Rego-Fix nuts 7.19 Rego-Fix Sealing disks 7.23 Rego-fix equipment 7.35 Quick change tool systems
.3 Cylindrical collet chucks.13 Rego-Fix nuts.19 Rego-Fix Sealing disks.23 Rego-fix equipment.35 Quick change tool systems Notes Tél.: +41 32 436 10 50 Fax: +41 32 436 10 55 info@wibemo.ch www.wibemo.ch
More informationHigh Precision Clamping System
Collet Locking- System Made in Switzerland total system runout 3 µm superior clamping force micrun High Precision Clamping System micrun High Precision Clamping System total system runout 3 µm at 3 xd
More informationCOLLETS. DESCRIPTION DIN 6388 COLLETS Form A For plain straight shank tools QUICK CHANGE TAPPING. ADAPTERS Bilz type. Positive drive adapters
COETS ESCRIPTION Page ESCRIPTION Page IN 88 COETS Form A For plain straight shank tools 5 QUICK CHANGE TAPPING AAPTERS Bilz type Positive drive adapters 2 IN 88 COETS Form E For threaded straight shank
More informationMACHINE TOOL ACCESSORIES
MACHINE TOOL ACCESSORIES ISO TOOLHOLDERS FOR CNC ROUTERS 33-70 Note: Measure the A dimension with the collet in the nut. Dimensions in Millimeters COLLET PULL STUD DESCRIPTION D A F N NUT WRENCH PROVIDED
More informationTool holder for rigid tapping Accessories MGT Set Screw MGT6SS MGT12SS CATALOG No. MGT20SS Synchro Adjuster Compensates
Tool holer for rigi tapping icense CATAOG No. Compensates for synchronization errors uring rigi tapping Improves threa quality an tool life by reucing thrust loas cause by synchronization errors up to
More informationCNC HIGH PRECISION TOOL HOLDER EXTENSIONS
d 1 1 CNC HIGH PRECISION TOO HOER EXTENSIONS With Spring Collet Heat Treated Alloy Steel ER collet chucks used for different projects and applications, save money by not purchasing extra-long tools! Choose
More informationTechnical. Scan this QR Code Featured Video
Scan this QR Code Featured Video 223 Lyndex-Nikken Product Warranty Standard Product Lyndex-Nikken Inc., the seller, warrants to the user, who purchases and uses (the User ) the Standard Product, as hereinafter
More informationFeatures Benefits. powrgrip Collets. Swiss Quality Made in Switzerland to ISO9001/ISO14001.
Swiss Tools Features Benefits 1 Swiss Quality Made in Switzerland to ISO9001/ISO14001. Marking With type and size (reduced collet selection error). Product Traceability Lot number marked on collets, therefore
More informationERos TOOLHOLDING SYSTEM SIMPLICITY ULTRA PRECISION EXTREME PERFORMANCE
ERos TOOLHOLDING SYSTEM SIMPLICITY ULTRA PRECISION EXTREME PERFORMANCE HISTORY 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the manufacturing of Sulky Hubs. 1973 Parlec begins
More informationToolholders & Accessories
Toolholders & Accessories Contact us for a fast quote. USA Headquarters 364 email: sales@napgladu.com (800) 457-7468 Canada, Montreal (800) 363-9117 Canada, Toronto (888) 251-2236 Table of Contents Toolholders
More information4-component Dynamometer (RCD)
Force 4-component Dynamometer (RCD) Type 9171A... Rotating for measuring cutting forces in heavy machining The rotating 4-component dynamometer (RCD) Type 9171A... permits the measurement of the forces
More informationLF3800 stainless steel push-to-connect fittings
3800 push-to-connect fittings principle of system 3800 push-to-connect fitting system The 3800 range provides the advantages of push-to-connect fittings instant connection and disconnection for a wider
More informationICB12, ICB18 and ICB30 4-wire DC DS ENG
Proximity inuctive sensors with complementary output function escription enefits complete family. vailable in M12, M18 an M30 housings with an operating istance from 2 to 22 mm. Less machine owntime. Lower
More informationE2EM-X4X1 2M *2 E2EM-X4X2 2M Shielded E2EM-X8X1 2M *2 E2EM-X8X2 2M *1 M30 15 mm E2EM-X15X1 2M *2 E2EM-X15X2 2M
Long-istance Proximity Sensor EEM CSM_EEM_DS_E Long-istance Proximity Sensor Long-istance etection at up to mm enables secure mounting with reuce problems ue to workpiece collisions. No polarity for easy
More informationSHRINK FIT TOOLHOLDER TECHNOLOGY CV40 SHRINK FIT HOLDERS - INCH & METRIC 36 CV50 SHRINK FIT HOLDERS - INCH & METRIC 37-38
SHRINK FIT TOOLHOLDER TECHNOLOGY 34-35 CV4 SHRINK FIT HOLDERS - INCH & METRIC 36 CV5 SHRINK FIT HOLDERS - INCH & METRIC 37-38 BT4 SHRINK FIT HOLDERS - INCH & METRIC 39 HSK63A SHRINK FIT HOLDERS - INCH
More informationAppearance Sensing distance Output configuration Operation mode Model NO E2EQ-X7D1 2M
Spatter-resistant Proximity Sensor EEQ CSM_EEQ_DS_E Spatter-resistant Fluororesincoate Proximity Sensor Superior spatter resistance. Long Sensing-istance s ae for sensing istances up to mm. Pre-wire Smartclick
More informationE2EQ-X10D1-M1TGJ 0.3M
Spatter-resistant Proximity Sensor EEQ CSM_EEQ_DS_E_9_ Spatter-resistant Fluororesincoate Proximity Sensor Superior spatter resistance. Long Sensing-istance s ae for sensing istances up to mm. Pre-wire
More informationSIT timing pulleys - EAGLE
IT timing pulleys - EAGLE The IT EAGLE pulleys, manufacture with innovative high-tech equipments, have been specifically esigne to fit with the ILENT NC belt. This combination, thanks to the continuous
More informationRANGE SUMMARY OF RITEL PRODUCTS, AS SUPPLIED BY ELLMAX ELECTRONICS LTD., LONDON
Ellmax Electronics Ltd Unit 29 Leyton Business Centre Etloe Road, Leyton, London, E10 7BT Tel: 020 8539 0136 Fax: 020 8539 7746 Email: ellmaxelec@aol.com Web: www.ellmaxelec.com Ritel s range of quality
More informationACS LP Series Mechanical-Bearing Rotary Stage
ACS LP Series Rotary Stages ACS LP Series Mechanical-Bearing Rotary Stage Integral pneumatic ER collet chuck Clear aperture for product feed-through Low inertia shaft for maximum acceleration Integral
More informationE2EM-X4X1 2M *2 E2EM-X4X2 2M Shielded E2EM-X8X1 2M *2 E2EM-X8X2 2M *1 M30 15 mm E2EM-X15X1 2M *2 E2EM-X15X2 2M
Long-istance Proximity Sensor EEM CSM_EEM_DS_E_7_ Long-istance Proximity Sensor Long-istance etection at up to mm enables secure mounting with reuce problems ue to workpiece collisions. No polarity for
More informationAppearance Sensing distance Output configuration Operation mode Model. Appearance Sensing distance Output configuration Operation mode Model
Spatter-resistant Proximity Sensor EEQ CSM_EEQ_DS_E Spatter-resistant Fluororesincoate Proximity Sensor Superior spatter resistance. Long Sensing-istance s ae for sensing istances up to mm. Pre-wire Smartclick
More informationAppearance Sensing distance Output configuration Operation mode Model. Appearance Sensing distance Output configuration Operation mode Model
Spatter-resistant Proximity Sensor EEQ CSM_EEQ_DS_E Spatter-resistant Fluororesincoate Proximity Sensor Superior spatter resistance. Long Sensing-istance s ae for sensing istances up to mm. DC -Wire s.
More informationElectrical connection
IS 230 Foo & Beverage Inuctive switches Dimensione rawing Part No. 501 11727 20mm 10-30 V DC 100 Hz embee Slim an short cylinrical metal housing M30x1.5 V4A / AISI 316L stainless steel housing ECOLAB teste
More informationModel Operation mode TL-W5MD1 2M *2 TL-W5MD2 2M *2 TL-W1R5MC1 2M *1 TL-W3MC1 2M. DC 3-wire, NPN TL-W5MC1 2M TL-W20ME1 2M *1 TL-W20ME2 2M *1
Flat Inuctive CSM DS_E Stanar Flat s in Many Different Variations Only mm thick yet provies a sensing istance of mm (MC). ie-cast moels also available. Be sure to rea Safety Precautions on page 7. Orering
More informationYOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND
- YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether
More informationElectronic indicators, Dial Gauges, Precision Indicators
Electronic indicators, Dial Gauges, Precision Indicators F-1 E LECTRONIC I NDICATORS AND D IAL G AUGES EASY-TO-USE AND VERSATILE As manufacturer of a full range of precision dial gauges for more than 50
More informationProduct information PI 54 en Machining unit xxx Slide unit xxx
Product information PI 54 en Machining unit 0.5.030.xxx Slide unit 0.2.200.xxx 2016-03-01 Table of Contents Table of Contents Machining Unit Brief Description...4 Technical Data...6 Dimensions...7 Precision...8
More informationINTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16
INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying
More informationAlberti System LIVE TOOLS
LIVE TOOLS 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com S MARTC HANGE New from, a complete range of live tools with interchangeable
More informationMODEL R-502 ROUTER ITEM NO PART NO DESCRIPTION PRICE
1 6520038 CORD ASS'Y 1.5 X 2 X 2.5 FOR GBR (110V) 11.98 6520571 CORD ASS'Y 1 X 2 X 2.5 FOR GBR (240V) 13.98 6520025 CORD ASS'Y 1 X 2 X 2.2 EXCEPT ABOVE 13.79 2 6560044 CORD HOLDER 10 0.69 3 6560057 CORD
More informationClean packaging Class M3.5 Standard packaging Class M5.5. The U type is recommended when changing tubing sizes. Packaging
eries LQ Options Panel mounting nut LQ U Applicable fitting LQN P Applicable fitting LQ LQ Application For LQ For LQ insert bushing Clean packaging M. tandard packaging M. The U type is recommended when
More informationMarPreset. Increase Your Efficiency.
+ Ma rpre s e t. To o l Preset t er s 3 MarPreset. Tool Presetters Ma rpre set Tool Presetters 19-2 Ma rpre set 1500 19-3 Ma rpre set 1800 19-4 Ma rpre set 1800 Shrink S et 19-5 Ma rpre set 2500 19-6 Ma
More informationMODULAR BORING PROGRAM
online version Click on the highlighted texts for a quick access to the pages MOUAR BORING PROGRAM MOUAR BORING SYSTEM & COUPING SYSTEM... MOUAR BORING SYSTEM AVANTAGES... PROUCT OVERVIEW... MOUAR BORING
More informationSTANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
More informationDiamond Scribing on MDX-40 & JWX-10
Diamond Scribing on MDX-40 & JWX-0 This document covers diamond scribing using the MDX- 40 and JWX-0 as well as the required accessories. Materials Required: BT-EGX-5, High Precision Spring Loaded Burnishing
More informationNEW CAPTIS CLAMPING SYSTEM. The modular and flexible system for internal and external clamping
NEW CAPTIS CLAMPING SYSTEM The modular and flexible system for internal and external clamping CAPTIS CLAMPING SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
More informationETS / ETA Collets and Nuts
ETS / ETA Collets and Nuts CH 6805 MEZZOVICO Zona Industriale 3 Tel. ++41 (0)91 946 40 70 Fax ++41 (0)91 946 40 47 E-MAIL info@tecnopinz.com WEBSITE www.tecnopinz.com k 1.1.1 Catalogue_ETS_ETA_2018 (V.01.01.2018)
More informationYE-CT13 EUROPE SPIRAL FLUTE / SPIRAL POINT. New Edition
SIRA FUTE GUN OINT SIRA FUTE / SIRA OINT YE-CT13 EUROE New Eition SIRA FUTE / SIRA OINT HEA OFFICE 68, Cheongcheon-ong, Bupyeong-Gu, Incheon 3-030, KOREA HONE :+82--526-0909, FAX:+82--526-4373 Http://www.yg1.r
More informationFor MEGA MICRO CHUCK Available in 0.1mm diameter increments to suit all the cutting tool shank sizes with maximum accuracy. Despite their compact size
MICRO COLLET NEW BABY COLLET NBC ENDMILL COLLET COLLET EJECTOR MEGA E COLLET STRAIGHT COLLET for MILLING CHUCK PERFECT SEAL (MPS / BPS / EPS) PULL STUD BOLT POINT MASTER PRO PMP POINT MASTER PMC POINT
More informationنﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr - your stable partner for manufacturing. Marstand. The latest information on MARSTAND products can be found on our website: www.mahr.com, WebCode 210 marstand Indicator Stands, Comparator
More informationMarTest. Test Indicators
- - Overview Order on our SECURE website: - Versions Measuring Dial style Readings Styli Order no. Order no. range with Kit* Standard S ±." --.". mm 6 S ±." --.". mm 6 SG ±." --.". mm 7 SGI ±." (±. mm)
More informationMarTest. Test Indicators
- - Overview - Versions Standard Measuring Dial style Readings Styli Order no. Order no. range with Kit* S ±. mm --. mm. mm SG ±. mm --. mm. mm 7 SA ±. mm --. mm. mm SGA ±. mm --. mm. mm S ±." --.". mm
More information1. Prerequisites 8 2. Prepare the Chemistrie TM lenses 9 3. Perform a Chemistrie TM job 10
User manual USER MANUAL CONTENTS CONTENTS MR BLUE SUN & SPORT EDITION 5 I. PERFORM A CHEMISTRIE TM JOB 7 1. Prerequisites 8 2. Prepare the Chemistrie TM lenses 9 3. Perform a Chemistrie TM job 10 II. CARRY
More informationStep Shaft Design Analysis
Step Shaft Design Analysis Shigley Problem 18-20 1. Obtain step shaft assembly from the shared drive, this assembly should include the step shaft and two bearing supports with constraints already provided.
More informationACS Series. Mechanical-Bearing Rotary Stage. Integral pneumatic ER collet chuck or 3-jaw gripper. Clear aperture for product feed-through
ACS Series Mechanical-Bearing Rotary Stage Integral pneumatic ER collet chuck or 3-jaw gripper Clear aperture for product feed-through Normally-closed or -open gripper options Low-inertia shaft for maximum
More informationPCB Supports. Screw and Locking Supports. Threaded Supports. Metal Supports
Supports Screw an Locking Supports 406-409 Treae Supports 410-411 Metal Supports 412-413 405 Accessories Metal an nylon (Printe Circuit Boar) accessories provie support, spacing an locking of te boars
More informationTEC APO 200 OWNER S MANUAL
TEC APO 200 OWNER S MANUAL 2005 IMPORTANT - PLEASE READ THIS MANUAL BEFORE USING YOUR TELESCOPE SAFETY WARNINGS Do not look at the sun through the telescope! Viewing the sun through the telescope without
More informationProduct Information. ECI 119 Absolute Rotary Encoder
Product Information ECI 119 Absolute Rotary Encoder November 2010 ECI 119 Rotary encoders without integral bearing for integration in motors Hollow through shaft 50 mm Inductive scanning principle A =
More informationRibbon Supply Spindle Maintenance Kit
Installation Instructions This kit includes the parts and documentation necessary to install the Ribbon Supply Spindle Maintenance Kit in the 105SL printer. Read these instructions thoroughly before installing
More informationThis is trial version
s, s, Ejector coupling devices, Unscrewing components, Two-stage ejectors, Latch locking units, Mould slides-modular system 2.01 2.02 Ordering example : Z 40 / 1,6 x 40 Shaft Overall length Z02/... 2.1
More informationIncremental Encoder with Hollow Shaft
Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines
More informationPREMIUM FU HSC. mill. Safety Integrated. Optimum Premium 5-axis universal machining center with SIEMENS SINUMERIK 840D sl
mill FU 5-600 HSC Optimum Premium 5-axis universal machining center with SIEMENS SINUMERIK 840D sl Heavy type High productivity Precision linear guidings in all axes High rapid traverse rate of 36 m/min
More informationClassic Collet Knobs. Standard Product Variety. Introduction. Possible Customization
Precise quality knobs Secure collet mounting Wide variety Lots of accessories Custom colors on request Standard Product Variety to mm knob size Shaft diameter: mm to ¼" Glossy or matt surface or gray knob
More informationModel Operation mode. TL-Q2MC1 DC 3-wire, NPN TL-Q5MC1 *2 TL-Q5MC2. DC 3-wire, NPN TL-G3D-3
Rectangular Stanar Proximity TL-N/TL-Q/TL-G A Wealth of Moels for All Types of Applications Easy installation, high-spee pulse generator, high-spee rotation control, an more. Direct mounte to metal (-N
More informationInstallation Guide Mounting Kit for Mounting Philips Avalon CTS Cordless Fetal Transducer System on Wall, 2'' Post, Rail, or Slide-on Mounting Plate
Installation Guide Mounting Kit for Mounting Philips Avalon CTS Cordless Fetal Transducer System on Wall, 2'' Post, Rail, or Slide-on Mounting Plate The purpose of this guide is to: 1. Describe mounting
More informationThe supporting roller has the thick-wall outer ring, by. Cylindrical Roller Bearing
0 ylinrical Roller earing The supporting roller has the thick-wall outer ring, by which the roller can be rolle irectly at the rollway an withstan the large loa. The supporting rollers mae by our company
More informationfpl=^a^mqbo pi=^a^mqbo _~ëáå=^a^mqbo oéé~áê=fåëíêìåíáçåë
fpl=^a^mqbo pi=^a^mqbo _~ëáå=^a^mqbo oéé~áê=fåëíêìåíáçåë A Contents ISO ADAPTER 1 Disassembly... 4 2 Assembling the handpiece holder... 5 3 Assembling the adapter, compl... 6 4 Function check... 7 5 Spare
More informationBoring Bits with Parallel Shank HW Z2 V2 RH. Saw Blades. Jig. & Knives. Power Tools. Bits for Hand.
abre & ets owel rills Boring Bits with Parallel hank 50 513 514 15 120 13 513.150.11 16 120 13 513.160.11 18 120 13 513.180.11 20 120 13 513.200.11 22 125 13 513.220.11 25 125 13 513.250.11 26 125 13 513.260.11
More informationOptical Encoders. Sold & Serviced By: Toll Free Phone: Toll Free Fax:
SERVO-TEK SERVO-TEK PRODUCTS COMPANY, INC. Optical Encoders www.servotek.com Toll Free Phone: 877-378-0240 sales@servo2go.com RC-800 Summary Hollow Shaft Encoders ST50 Series High Performance Rotary Incremental
More informationBurs Toolholders Toolholders. CAT40 ER20 Collet Chucks, Straight Shank. Collet Extension and Parts. CAT40 ER25 Collet Chucks, Straight Shank
Table of Contents Burs 386 394 408 Cylindrical End Cut SB, Uncoated CAT40 ER20 Collet Chucks, Straight Shank Collet Extension and Parts CAT40 Jacobs Taper Holders and Parts 387 395 409 Cylindrical Ball
More informationSide block mm Combination element to extend or to combine two stoppers
Clamping tools 45 5D workpiece stopper Side block 10-18 mm Combination element to extend or to combine two stoppers Application: One of the various application of the workpiece stopper is as a versatile
More informationContents EPB Tooling Systems
Contents EPB Tooling Systems Catalogue presentation.............................................. 2-3 Product overview Monobloc and Graflex holders...................... 4-6 Combimaster holders.............................
More informationDIGITAL OBSERVATION GUARD LOW PROFILE PAN TILT KIT USER MANUAL
DIGITAL OBSERVATION GUARD LOW PROFILE PAN TILT KIT USER MANUAL Version 2.1 June 4, 2013 0 Table of Contents Low Profile Pan Tilt Kit Description... 3 Low Profile Pan Tilt Unit Basic Operation... 4 Mounting
More informationRemote Control Electrical Roller Blinds
Remote Control Electrical Roller Blinds Instruction Manual for Model HT200 Contents 1. Description of Remote Control Electrical Roller Blind General Information Technical Data 2. Parts List Model HT200
More informationCapto-Compatible* Turn/Mill Toolholders
Capto-Compatible* Turn/Mill Toolholders The C4, C5, C6, holders you need, Techniks Certified. ER Collet Chucks End Mill Holders ShrinkFIT Face Mill Arbors Turning Tools & Inserts SlimFIT Holders Built
More informationSERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according
More informationYOUR MEASURING TASKS ARE SENSITIVE. MARTEST IS HIGHLY SENSITIVE.
- and Touch Probes YOUR MEASURING TASKS ARE SENSITIVE. MARTEST IS HIGHLY SENSITIVE. Since 1936 Mahr is one of the leading global producers of test indicators, we have achieved this with the continuous
More informationMECHANICAL ELECTRICAL CONNECTIONS. * Index (Z) optional. See Ordering Information
NorthStar brand SLIM Tach ST1250 Bearingless Encoder Key Features Redesigned Using Our Revolutionary Sensor Technology to Provide a Large Air Gap of 0.060 Redesigned Circuitry for On-Board Diagnositcs
More informationNEW CAPTIS-M COLLET CHUCK. The manually operated collet chuck for rotating and stationary use
NEW CAPTIS-M COLLET CHUCK The manually operated collet chuck for rotating and stationary use CAPTIS-M COLLET CHUCK The modularly designed CAPTIS clamping system gets a new family member: the CAPTIS-M collet
More informationSYSTEM MAINTENANCE MANUAL TACTICAL ENGAGEMENT SIMULATION SYSTEM (TESS) TARGET TRAINING SYSTEM (TTS) OCONUS FIXED LOCATION INSTALLATION
SYSTEM MAINTENANCE MANUAL TACTICAL ENGAGEMENT SIMULATION SYSTEM (TESS) TARGET TRAINING SYSTEM (TTS) OCONUS FIXED LOCATION INSTALLATION INITIAL SETUP Preconditions Coordinate the TTS setup with the training
More informationCapto-Compatible* Turn/Mill Toolholders
Capto-Compatible* Turn/Mill Toolholders The C4, C5, C6, holders you need, Techniks Certified. ER Collet Chucks End Mill Holders ShrinkFIT Face Mill Arbors Turning Tools & Inserts SlimFIT Holders Built
More informationSense it! Connect it! Bus it! Solve it! ENCODERS
Sense it! Connect it! Bus it! Solve it! ENCODERS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
More informationBEST DEALS. TESA measurement tools and solutions Perfection down to the detail for every user. HexagonMI.com TESAtechnology.com
BEST DEALS TESA measurement tools and solutions Perfection down to the detail for every user Valid until 31.12.2017 Prices exclude VAT Version B&S - EN - USD HexagonMI.com TESAtechnology.com SWISS ACCREDITATION
More informationTECHNICAL DATASHEET Incremental Encoder RI 58-F
Incremental hollow shaft encoder Up to 10 000 ppr Through hollow shaft and hubshaft up to 12 mm (14 mm optional) Optimized stator coupling Applications: Feedback for asynchronous motors, industrial applications
More informationPFPDARM3 Product Illustration
PFPDARM3 Product Illustration page 1 of 15 PFPDARM3 Components & Fasteners 1x 1x 4x 4x 8x 4x 1 each TOOLS REQUIRED Phillips Screwdriver 1/2" Wrench 1/2" Socket Wrench 3/32" (2.38mm) 3/16" (4.76mm) 1/8"
More informationWhy use machine adapted clamping units?
Why use machine adapted clamping units? Better performance Faster tool changes Use Coromant Capto tools for turning, milling and drilling Ready-equipped to channel high pressure coolant to the latest in
More informationIn-ceiling Housing. Installation Manual SHP-3701F
In-ceiling Housing Installation Manual SHP-3701F TABLE OF CONTENTS Overview 3 What s Included 3 Installation Instructions 4 Installation (SCP-3430 Series) 4 Installation (SCP-3370/SNP-5200 SERIES) 9 Installation
More informationSIZES FROM 1, ,000 Nm BACKLASH FREE, TORSIONALLY STIFF METALLIC BELLOWS COUPLINGS
BX ZA SIZES FROM 1,500-100,000 Nm BAKLASH FREE, TORSIONALLY STIFF METALLI BELLOWS OUPLINGS BELLOWS OUPLINGS BX ZA Optional: GENERAL INFORMATION ABOUT R+W BELLOWS OUPLINGS: SERVIE LIFE R+W bellows couplings
More informationDial gauges Electronic and Analogue
Dial gauges Electronic and Analogue 1F-1 Dial gauges Electronic and Analogue EASY-TO-USE AND VERSATILE For more than 50 years we have been producing and distributing a wide range of easy-to-use and versatile
More informationExpansible Tapping Holder
Expansible Tapping Holder Floating and expansion design will reducte the differential of motor rotary speed and feeding speed so will extend the life of tap. Use ER High Spring Collet, you don t need to
More informationCOGNEX. DataMan 100 Verifier. Quick Reference Guide
COGNEX DataMan 100 Verifier Quick Reference Guide 1 Hardware Installation Kit Contents Overview Install the 16mm Lens Mount the Reader Set Lighting Angle Install Software and Connect the DataMan 100 Verifier
More informationMore Precision. capancdt 61x0/IP // Capacitive measuring system for industrial applications
More Precision capancdt 61x0/IP // Capacitive measuring system for industrial applications 2 Capacitive measuring system for industrial applications capancdt 61x0/IP Compact and robust controller 8m IP68
More informationAdapter Kit for PanelView 1200/1200e Touch Screen Terminal Cutout
Installation Instructions Adapter Kit for PanelView 1200/1200e Touch Screen Terminal Cutout Catalog Numbers 2711-NR5T, 2711P-RAT12E2 Topic Page About This Publication 1 Important User Information 2 About
More informationAssembly Instructions for #5630 Medication PalWOW
Assembly Instructions for #5630 Medication PalWOW Before assembling, please familiarize yourself with all the parts and check to make sure you have all the parts as listed below. A B A & B - The box in
More information5. Operating instructions: Octagon 200CL
1. Technical specifications 5. Operating instructions: Octagon 200CL Copyright 2015 by Endecotts Ltd. 33 1. Setting up Technical specifications SIEVE SHAKER MODEL: Octagon 200CL General Information The
More informationRAPIDSHOT TABLE OF CONTENTS. 3 RAPIDSHOT Cartridge Setup. 4 Filling RAPIDSHOT Cartridges. 7 Cartridge Removal and Storage. 9 4:1 Conversion Procedure
The User Guide to RAPIDSHOT TABLE OF CONTENTS 3 RAPIDSHOT Cartridge Setup 4 Filling RAPIDSHOT Cartridges 5 Using therapidshot 7 Cartridge Removal and Storage 9 4:1 Conversion Procedure 10 How to Order
More informationInstallation Guide Roll Stand Kit for Philips Avalon FM20/30
3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com Installation Guide Roll Stand Kit for Philips Avalon FM20/30 The purpose of this guide is to: 1. Describe attachment
More informationAssembly instructions VOSS quick connect system 203 N
Assembly instructions VOSS quick connect system 203 N The optimized classic A. Important notices Please observe before using the quick connect system VOSS quick connect system 203 N is suitable for air
More informationMASTER CATALOG KCPM45.
MASTER CATALOG KCPM45 KSEM Modular Drills KCPM45 Your New Grade for Tough Jobs in Low-Carbon Steel KCPM45 combines a very tough, fine-grain carbide substrate with an advanced multilayer TiAlN coating.
More informationHead office. Sales offices. ISRAEL NOGA Engineering Ltd. Tel: Fax:
C A T A L O G Head office ISRAEL NOGA Engineering Ltd. Tel: 972-4-9808080 Fax: 972-4-9808638 noga@noga.com www.noga.com Sales offices ISRAEL NOGA Tools Tel: 972-9-835-3243 Fax: 972-9-835-3307 nogatools@nogatools.co.il
More informationTABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION
S6 USER S MANUAL TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION SECTION 4 SLIDE CONFIGURATION ACCESSORIES SECTION 5 RACK MOUNT
More informationAbsolute Encoders Multiturn
The multiturn encoders 6 and 8, with interface and combined optical and magnetic sensor technology, offer a maximum resolution of 5 bits. These encoders are programmable via the Ezturn software. The hollow
More informationMounting Instructions for MTP Modules
VISHAY SEMICONDUCTORS www.vishay.com Modules By Kevin Liu This application note introduces Vishay s MTP rectifier-switch modules and discusses the assembly and PCB issues involved in their use. MTP modules
More informationJIB EPT USER MANUAL. Please read this manual carefully before using the Alphatron JIB ETP unit! JIB & MOTORISED PAN AND TILT UNIT
JIB EPT JIB & MOTORISED PAN AND TILT UNIT USER MANUAL EN Please read this manual carefully before using the Alphatron JIB ETP unit! Thank you for purchasing a Alphatron product The EPT head is developed
More informationOptical Kit Encoder Page 1 of 7. Description. Features
Description Page 1 of 7 The E2 optical encoder is designed as a direct replacement for the Avago HEDS / HEDM 5500-5600 series. The E2 is a rotary encoder with a rugged glass-filled polymer enclosure, which
More information