Automatic Identification System AIS. Type RM 808 AIS. Short Operation Manual

Size: px

Start display at page:

Download "Automatic Identification System AIS. Type RM 808 AIS. Short Operation Manual"

Vernon Johnson
6 years ago
Views:

1 Raytheon Marine GmbH High Seas Products Postfach 1166 D Kiel Germany Tel Fax Service@raykiel.com Automatic Identification System AIS Type RM 808 AIS Short Operation Manual RM 808 AIS Short Operator Manual Page 1 Version 1.0

2 Please read this first! Warning: Although Raytheon Marine strives for accuracy in all its publications; this material may contain errors or omissions, and is subject to change without prior notice. Raytheon Marine shall not be made liable for any specific, indirect, incidental or consequential damages as a result of its use. Raytheon Marine components may only be used in safety of life devices or systems, with the express written approval of Raytheon Marine, as the failure of such components could cause the failure of the Raytheon Marine device or system. If these fail, it is reasonable to assume that the safety of the user or other persons may be endangered. Copying of this document, and giving it to others and the use or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhaltes nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Toute communication ou reproduction de ce document, toute exploitation ou communication de son contenu sont interdites, sauf autorisation expresse. Tout manquement à cette règle est illicite et expose son auteur au versement de dommages et intérêts. Sin nuestra expresa autorización, queda terminantemente prohibida la reproducción total o parcial de este documento, así como su uso indebido y/o su exhibición o comunicación a terceros. De los infractores se exigirá el correspondiente resarcimiento de daños y perjuicios.. RM 808 AIS Installation Manual Version Page 2 of 27

3 Type RM 808 AIS Short Operation Manual Index Page Number History of Changes RM 808 AIS Components and Interfaces RM 808 AIS User Interface Navigation Screen Inputing Voyage Related Data (User Password Protected) Setting Ship Related Data (User Password Protected) Configuring the RM 808 (User Password Protected) Changing the Service Password (Service Password Protected) Changing the MMSI / IMO Numbers Writing an Addressed Safety Related Message to an individual Vessel Writing a Broadcast Safety Related Message to all Vessels Safety Functions MOB and SRM Buttons MOB Person over Board SRM - Safety Related Message Display Settings Contact and Support Information RM 808 AIS Short Operator Manual Page 3 Version 1.0

4 History of Changes Date Version Status Comments Responsible Released Latest release amendments A. Lesch RM 808 AIS Short Operator Manual Page 4 Version 1.0

5 1. RM 808 AIS Components and Interfaces RM 808 AIS Short Operator Manual Page 5 Version 1.0

6 2. RM 808 AIS User Interface Soft Keys [M1] [M8] Display Safety Keys Navigation Screen Header (max. 3 lines) Navigation Screen or MENU Structure (Content 13 lines) Keyboard Enter Key Cursor Cross RM 808 AIS Short Operator Manual Page 6 Version 1.0

3. Navigation Screen GPS Solution Latitude & Longitude Own speed over Ground Own course over Ground UTC Time LAT:N 1^27.845'ExtSOG:34.6kn 11/26/2002 LON:E 0^21.289'IntCOG:173.

7 3. Navigation Screen GPS Solution Latitude & Longitude Own speed over Ground Own course over Ground UTC Time LAT:N 1^27.845'ExtSOG:34.6kn 11/26/2002 LON:E 0^21.289'IntCOG:173.0^ 10:52:26 IntGPS: 3D ExtHDT:222^ Reg6 A/ 001/021..ShipName...RNG.BRG..SOG..COG.. 1>DOREEN > N/A >FINE EAGLE >0.00 N/A >SYLVAEPSILON-----> >ESSOTOKYO > >OLYMPIAHIGHWAY FE> >SANEI > >KATOO > >OLYMPIA PALACE---> [BASESTAT] 9>MINILOG > >ALIBRAHIMYA-----> >TITANIC > N/A N/A 12>BWRTZ > > Received Vessels (Vessel Listing) > Indicates further Vessels in Listing RM 808 AIS Short Operator Manual Page 7 Version 1.0

8 4. Inputing Voyage Related Data (User Password Protected) Note: The User Password is set to NAUT please reconfigure it immediately after Transponder initial operation Select Voyage Settings from the Main Menu with the cursor button [Up] & [Down] or press Nr. 3 on the keyboard N 1^20' E 0^13' 1> N/A2>0.003>0.10nm Menu Messages View AIS Status Voyage Settings Ship Settings Transponder Configuration Msg Service Configuration Display Settings Displ NUMSelect-> <-Back The Password Query Field appears. Input User Password and press [Enter]. N 1^31' E 0^24' 1>0.012>1.303>1.80nm User password protected! Please enter user password: Enter Exit RM 808 AIS Short Operator Manual Page 8 Version 1.0

9 Scroll the Voyage Data Fields with [Enter] and input own vessel data. Select a default Cargo Type and NavStat Setting with the cursor buttons [Left] & [Right]. Save the new settings by pressing [Save], and return to the Main Menu Screen by pressing [Exit]. Press [Back] to return to the Main Menu without saving any changes. N 1^18' E 0^12' 1>0.012>1.303>1.80nm *********** Voyage Settings ************ Cargo :<N/A or harmless> Draught :24.8m PoB :1 Dest. :CASABLANCA ETA :10/13 12:31 NavStat.:Engaged in fishing Save Back RM 808 AIS Short Operator Manual Page 9 Version 1.0

10 5. Setting Ship Related Data (User Password Protected) Select Ship Settings with cursor button [Up] & [Down] or press Nr. 4 on the keyboard. Note: The User Password is set to NAUT please reconfigure it immediately after Transponder initial operation N 1^23' E 0^16' 1>0.012>1.303>1.80nm Menu Messages View AIS Status Voyage Settings Ship Settings Transponder Configuration Msg Service Configuration Display Settings Displ NUM Select-> <-Back Input User Password and press [Enter]. N 1^23' E 0^16' 1>0.012>1.303>1.80nm User password protected! Please enter user password: Enter Exit RM 808 AIS Short Operator Manual Page 10 Version 1.0

11 Scroll the Ship Settings Fields with [Enter] and input own vessel data. Select a default Ship Type with the cursor button [Left] & [Right]. Save the new settings by pressing [Save]. By pressing [Back] you return to the Main Menu Screen without saving any changes. N 1^19' E 0^12' 1>0.012>1.303>1.80nm ************ Ship Settings ************* /\ + CallSign:D11233 / \ ShipName:ANDREA DORIA Length :220m A Beam :43m x--+ RefPtExt:A200 B20 C10 D33m B RefPtInt:A190 B30 C20 D23m +-C-+D-+ ShipType: Pilot vessel Save Back RM 808 AIS Short Operator Manual Page 11 Version 1.0

12 6. Configuring the RM 808 (User Password Protected) Select Transponder Configuration with the cursor button [Up] & [Down] or press Nr. 5 on the keyboard. Note: The User Password is set to NAUT please reconfigure it immediately after Transponder initial operation N 1^19' E 0^13' 1>0.012>1.303>1.80nm Menu Messages View AIS Status Voyage Settings Ship Settings Transponder Configuration Msg Service Configuration Display Settings Displ NUM Select-> <-Back Input default User Password and press [Enter]. N 1^19' E 0^13' 1>0.012>1.303>1.80nm User password protected! Please enter user password: Enter Exit RM 808 AIS Short Operator Manual Page 12 Version 1.0

13 Select desired Submenu with the cursor buttons [Up] & [Down] or by pressing the appropriate number on the keyboard. N 1^20' E 0^13' 1>0.012>1.303>1.80nm Transponder Configuration Change User Password View Region Settings Alarm Settings Interrogation Settings Sensor Settings Msg Displ NUM Select-> <-Back Change User Password: Select Submenu 1 Input new User Password (4 8 characters) and press [Enter] to save. Press [Back] to return to the Submenu without saving. N 1^21' E 0^14' 1>0.012>1.303>1.80nm ********* Change User Password ********* Enter new password : ***** Repeat new password: ***** {Length: 4..8 characters} Enter Back RM 808 AIS Short Operator Manual Page 13 Version 1.0

14 Alarm Settings: Select Submenu 3 Press [Change] to enable or disable the Alarms Function. [Back] takes you to the Submenu without saving, by pressing [Save] the changes are stored and by pressing [Exit] you return to the Submenu. Note: It is highly recommended to enable the Alarm Function. N 1^21' E 0^15' 1>0.012>1.303>1.80nm ************ Alarm Settings ************ on/off Alarm generation: [*]/[ ] Note: This setting also affects output on ECDIS port. Save Change Back Long Range Interrogation: Select Submenu 4 Navigate the Input Fields with [Up] & [Down] and press [Change] to enable or disable interrogation requests on individual data fields. [AllOn] sets all data fields free for interrogation. Press [Back] to return to the Submenu without saving, and [Save] to save settings and return to the Submenu. N 1^21' E 0^14' 1>0.012>1.303>1.80nm ******** Interrogation Settings ******** on/off auto/manu LR-Interrogation: [*]/[ ] [*]/[ ] Data for Interrogation: Name,Call,IMO [*] Cargo [*] Length,Beam,Type [*] Draught [*] POS [*] PoB [*] SOG [*] Dest,ETA [*] COG [*] Date,Time [*] Save Change All On Back RM 808 AIS Short Operator Manual Page 14 Version 1.0

15 7. Changing the Service Password (Service Password Protected) Note: The User Password is set to NAUT please reconfigure it immediately after Transponder initial operation Select Service Configuration from the Main Menu with the cursor button [Up] & [Down] or press Nr. 6 on the keyboard. N 1^19' E 0^13' 1>0.012>1.303>1.80nm Menu Messages View AIS Status Voyage Settings Ship Settings Transponder Configuration Msg Service Configuration Display Settings Displ NUM Select-> <-Back Enter default Service Password N 1^24' E 0^17' 1>0.012>1.303>1.80nm Service password protected! Please enter service password: Enter Exit RM 808 AIS Short Operator Manual Page 15 Version 1.0

16 Select Submenu 1: Change Service Password. N 1^23' E 0^17' 1>0.012>1.303>1.80nm Service Configuration Change Service Password View User Password Settings Change MMSI / IMO Restore Factory Settings Msg Displ NUM Select-> <-Back Input new Service Password (4 8 characters) and press [Enter] to save. Press [Back] to return to the Submenu without saving. N 1^19' E 0^13' 1> N/A2>0.003>0.10nm ******* Change Service Password ******** Enter new password : Repeat new password: {Length: 4..8 characters} Enter Back RM 808 AIS Short Operator Manual Page 16 Version 1.0

17 8. Changing the MMSI / IMO Numbers Select Service Configuration from the Main Menu with the cursor button [Up] & [Down] or press Nr. 6 on the keyboard. N 1^19' E 0^13' 1>0.012>1.303>1.80nm Menu Messages View AIS Status Voyage Settings Ship Settings Transponder Configuration Msg Service Configuration Display Settings Displ NUM Select-> <-Back Select Submenu 3 Change MMSI/IMO with cursor button [Up] & [Down] by pressing Nr. 3 on the keyboard. N 1^21' E 0^14' 1>0.012>1.303>1.80nm Service Configuration Change Service Password View User Password Settings Change MMSI / IMO Restore Factory Settings Msg Displ NUM Select-> <-Back RM 808 AIS Short Operator Manual Page 17 Version 1.0

18 Input new MMSI / IMO Numbers and press [Save] to store input data. Press [Back] to return to the Submenu without saving. Note: Data input is limited to 9 characters. N 1^21' E 0^14' 1> N/A2>0.003>0.10nm ********** Change MMSI / IMO *********** MMSI : IMO No.: NUM Save Back RM 808 AIS Short Operator Manual Page 18 Version 1.0

19 9. Writing an Addressed Safety Related Message to an individual Vessel Select the Main Menu Screen with the [Menu] Button. N 1^46' E 0^39' 1>0.102>1.303>1.80nm Menu Messages View AIS Status Voyage Settings Ship Settings Transponder Configuration Msg Service Configuration Display Settings Displ NUM Select-> <-Back Select Messages with the cursor button [Up] & [Down] or press number Nr. 1 on the keyboard. Then select Write Addressed SRM. Select Message Recipient with cursor button [Up] & [Down]. Press [Exit] to return to the previous screen. N 1^19' E 0^12' 1>0.102>1.303>1.80nm Messages Write Addressed SRM View Write Broadcast SRM Inbox History Inbox SRM Inbox ALR (valid only) Msg Inbox LRI Displ NUM Select-> <-Back RM 808 AIS Short Operator Manual Page 19 Version 1.0

20 N 1^26' E 0^20' 1>0.102>1.303>1.80nm ************ Write Message *************..ShipName...Dist..SOG..COG..CallSign 1>DOREEN > N/A DORET6W 2>FINE EAGLE---> OEX1538 3>SYLVAEPSILON-> ND4RX 4>ESSOTOKYO----> ZA9A 5>OLYMPIAHIGHWA> FSH4 6>SANEI > YJQX9 7>KATOO > A4F317 8>OLYMPIA PALAC>1.34 [BASESTAT] 4DSW 9>MINILOG------> FOR6 10>ALIBRAHIMYA-> DEZ42 11>TITANIC----->2.75 N/A N/A FSG > NUM Select Back Input Message Text to selected vessel and press [Send]. The [Back] takes you back to the Navigation Screen without sending a message. N 1^20' E 0^13' 1>0.102>1.303>1.80nm ************ Write Message ************* Addressed SRM 129 SendTo:5004 (DOREEN) Text: TEXT INPUT IS POSSIBLE HERE auto/ A / B /A+B Channel: [*]/[ ]/[ ]/[ ] Send <Channel Channel> Back After message transmission, the Transmission Status Screen is displayed. LAT:N 1^18.963'ExtSOG:34.6kn 11/21/2002 LON:E 0^12.408'IntCOG: :11:08 Ships:21 /B IntGPS: 3D Region Transmission Status [+] AIS1:OK, acknowledgement received [ ] AIS2: Send To <-Back After Messaging is completed, the RM 808 AIS automatically returns to the Navigation Screen RM 808 AIS Short Operator Manual Page 20 Version 1.0

21 10. Writing a Broadcast Safety Related Message to all Vessels Select Messages with the cursor button [Up] & [Down] or press Nr. 2 on the keyboard. Select Write Broadcast SRM. N 1^19' E 0^12' 1>0.102>1.303>1.80nm Messages Write Addressed SRM View Write Broadcast SRM Inbox History Inbox SRM Inbox ALR (valid only) Msg Inbox LRI Displ NUM Select-> <-Back Write Message and press [Send]. The [Back] button takes you back to the Navigation Screen without sending a message. N 1^18' E 0^12' 1>0.102>1.303>1.80nm ************ Write Message ************* Broadcast SRM 111 Text:MILITARY EXCERSISE IN AREA, KEEP AW AY. SHIP MASTER auto/ A / B /A+B Channel: [ ]/[ ]/[ ]/[*] Send <Channel Channel> Back RM 808 AIS Short Operator Manual Page 21 Version 1.0

22 After message transmission, the Transmission Status Screen is displayed. N 1^19' E 0^13' 1>0.102>1.303>1.80nm Broadcast Transmission Status [+] OK, broadcast successful Send To <-Back After Messaging is completed, the RM 808 AIS automatically returns to the Navigation Screen. RM 808 AIS Short Operator Manual Page 22 Version 1.0

23 11. Safety Functions MOB and SRM Buttons The RM 808 AIS Transponder is fitted with Safety Keys, which allows automatic transmission of urgent messages. The SRM Button sends out Broadcast Safety Related Messages to all ships in the Vessel Listing. The MOB Button sends out precise position of incident to Addressed Vessels MOB Person over Board By pressing the MOB button the current navigation position of own vessel and time of incident is automatically saved. By pressing the [Broadcast] button, the MOB Message is automatically sent to all vessels within receiving range. By activating the [Send] button, an individual vessel can be chosen as recipient of the MOB Message. The MOB screen shows the 5 closest vessels within receiving range. LAT:N 1^20.088'ExtSOG:34.6kn 11/28/2002 LON:E 0^13.532'IntCOG:173.0^ 07:43:05 IntGPS: 3D ExtHDT:222^ Reg6 SRM A/ -MOB----MOB----MOB----MOB----MOB----MOB- MAYDAY,DE,ANDREA DORIA,D11233, ,PO S:N 1^20.083'_E 0^13.528'_UTC07:43 - P ERSON OVER BOARD AT POS:N 1^20.083'_E 0^13.528'_UTC07:43 1>DOREEN > N/A >FINE EAGLE >0.00 N/A >SYLVAEPSILON-----> >ESSOTOKYO > >OLYMPIAHIGHWAY FE> > NUM Send Broadcast Exit RM 808 AIS Short Operator Manual Page 23 Version 1.0

24 11.2. SRM - Safety Related Message The desired Distress Message Text can be selected by pressing the appropriate number on the keyboard. By pressing the [Exit] button it is possible to escape from this screen, without sending the SRM Message. Note: If no Message Subject is selected, the message is automatically sent as an undesignated distress call. N 1^22' E 0^15' 1>0.012>1.303>1.80nm ************ Write Message ************* -SRM----SRM----SRM----SRM----SRM----SRM- Broadcast message 1. UNDESIGNATED 2. FIRE, EXPLOSION 3. FLOODING 4. COLLISION 5. GROUNDING 6. LISTING, IN DANGER OF CAPSIZING 7. SINKING 8. DISABLED AND ADRIFT 9. ABANDONING SHIP 10. PIRACY/ARMED ROBBERY ATTACK NUM Select-> <-Exit Sending an SRM Message: To send the message transmission to all vessels, select the desired text and press the [Send] or [SRM] button. The [Back] button takes you back to the Message Selection Menu without sending the message. N 1^22' E 0^16' 1>0.012>1.303>1.80nm ************ Write Message ************* -SRM----SRM----SRM----SRM----SRM----SRM- Broadcast message MAYDAY,DE,ANDREA DORIA,D11233, ,PO S:N 1^22.658'_E 0^16.102'_UTC15:36 - F IRE, EXPLOSION ************** Send SRM? *************** Send <-Back RM 808 AIS Short Operator Manual Page 24 Version 1.0

25 Note: The SRM message transmission is automatically repeated every 180 seconds until the [Stop] button has been pressed. LAT:N 1^19.008'ExtSOG:34.6kn 11/28/2002 LON:E 0^12.452'IntCOG:173.0^ 07:31:52 IntGPS: 3D ExtHDT:222^ Reg6 SRM /B -SRM----SRM----SRM----SRM----SRM----SRM- MAYDAY,DE,ANDREA DORIA,D11233, ,PO S:N 1^19.006'_E 0^12.451'_UTC07:31 - F IRE, EXPLOSION Repeating SRM in 180 sec... ************** Stop SRM? *************** Stop Repeat <-Exit RM 808 AIS Short Operator Manual Page 25 Version 1.0

26 12. Display Settings Select Display Settings from the Main Menu with the cursor button [Up] & [Down] or press Nr. 7 on the keyboard. N 1^19' E 0^13' 1>0.012>1.303>1.80nm Menu Messages View AIS Status Voyage Settings Ship Settings Transponder Configuration Msg Service Configuration Display Settings Displ NUM Select-> <-Back By pressing [DayNight] you can switch between Day- and Nightlight Display Settings. The minimum and maximum settings for Brightness and Contrast are set with the cursor [Left] & [Right] keys. Press [Back] to return to the Submenu without saving any changes. N 1^20' E 0^14' 1>0.012>1.303>1.80nm *********** Display Settings *********** Mode +-[*] Day Min Max Brightness:<9> [*********] Contrast : 6 [****** ] +-[ ] Night Min Max Brightness: 3 [*** ] Contrast : 2 [** ] NUM DayNight Back RM 808 AIS Short Operator Manual Page 26 Version 1.0

27 13. Contact and Support Information Contact your local dealer for product support. Please see our Raytheon Marine Website for Service Listing. Raytheon Marine GmbH High Seas Products Postfach 1166 D Kiel Germany Tel Fax Service@raykiel.com RM 808 AIS Short Operator Manual Page 27 Version 1.0

Autopilot Override NFU Tiller

Autopilot Override NFU Tiller Raytheon Anschütz GmbH Postfach 1166 D - 24100 Kiel Germany Tel+49-431-3019-0 Fax+49-431-3019-501 Email Service@raykiel.com www.raytheon -anschuetz.de Autopilot Override Type 105-302 3432E/105--302.DOC012