Switchgear 1.1. CONTACTORS - Installation. Page 1.2. Page 1.2. CONTACTORS - Mini. Page POLE RELAY. Page 1.3. CONTACTORS - Standard Frame
|
|
|
- Buck Welch
- 5 years ago
- Views:
Transcription
1 Switchgear CONTACTORS Installation Page 1.2 CONTACTORS Mini Page POLE RELAY Page 1.2 CONTACTORS Standard Frame Page 1.3 CONTACTORS Large Frame Page 1.4 OVERLOADS Thermal Page 1.5 CONTROL RELAYS Industrial Page 1.6 CONTROL RELAYS Miniature Page 1.6 All s Exclude VAT and are subject to change without prior notice. 1.1
2 INSTALLATION CONTACTOR CONTACTORS INSTALLATION CONTACTORS (4 POLE) DIN Board mounting contactors for Distribution 230V control only CURRENT KW RATING AC1 AC1 AC3 at 400V IK IK IK A 63A 16KW 26KW 40KW 11KW 15KW MINI CONTACTORS (3 POLE) K07M ND2M AUXILIARY MECHANICAL INTERLOCK RATED CURRENT AC1 AC3 K07M Series MINI 3 POLE CONTACTORS K07M10*** K07M01*** 20A 20A Note: Replace *** with Voltage value : AC 024, 110, 230, 400 AUXILIARY CONTACT BLOCKS ND2M11 DESCRIPTION KW (AC3) 400V AUX CONT ACCESSORIES & SPARES MB7 Mechanical Interlock POLE RELAYS CURRENT RATING CONTACTS KNL622*** 20A KNL622 Note: Replace *** with Voltage value : AC 024, 048, 110, 230, 400 All s Exclude VAT and are subject to change without prior notice. 1.2
3 CONTACTORS STANDARD FRAME CONTACTORS (3 POLE) RATED CURRENT AC1 AC3 KW (AC3) 400V AUX CONT KNL Series 3 POLE CONTACTORS KNL910*** KNL901*** KNL1210*** KNL1201*** KNL1610*** KNL1601*** 11.5A 11.5A 15.5A 15.5A 5.5KW 5.5KW 7.5KW 7.5KW KNL9 KNL30 KNL2200*** KNL3000*** 35A 35A 22.5A 30.0A 11KW 15KW KNL4311*** KNL6311*** 75A 85A 45.0A 63.0A 22KW 30KW CONTACTOR COIL VOLTAGES COILS (50/60 Hz) KNL956*** KNL4356*** for KNL6 KNL30 for KNL43 KNL63 A.C. COILS (24, 48, 110, 230, 400, 500) A.C. COILS (24, 48, 110, 230, 400, 500) Note: Replace *** with Voltage value : AC 024, 048, 110, 230, 400, 500 KNL43 KNL63 NDL2 AUXILIARY CONTACTOR DESCRIPTION AUXILIARY CONTACT BLOCKS NDL211 NDL202 NDL213 NDL222 NDL231 for KNL9 KNL30 for KNL9 KNL30 for KNL9 KNL30 for KNL9 KNL30 for KNL9 KNL30 2NC + 3NC 3NO NPL1 AUXILIARY NDL411 NDL431 for KNL43 KNL63 for KNL43 KNL63 3NO RC NOISE FILTER SIDE MOUNT AUXILIARY CONTACT BLOCK NPL110 NPL101 for KNL9 KNL30 for KNL9 KNL30 ACCESSORIES AND SPARES (start contact) MECHANICAL INTERLOCK KMPL MBL MBL43 RC230V NT for KNL9 KNL30 for KNL9 KNL30 for KNL43 KNL63 for KNL9 KNL30 for KNL9 KNL30 DOL Enclosure Mechanical Interlock Mechanical Interlock Noise filter Blank legend plates All s Exclude VAT and are subject to change without prior notice. 1.3
4 CONTACTORS LARGE FRAME CONTACTORS (3 POLE) RATED CURRENT AC1 AC3 KNN Series 3 POLE CONTACTORS KNN80*** KNN95*** A 95A KW (AC3) 400V 37KW 45KW AUX CONT KNN110*** 135A 110A 55KW KNN80 KNN150*** KNN175*** 230A 250A 150A 175A 75KW 90KW KNN210*** KNN260*** KNN315*** 350A 450A 500A 210A 260A 315A 110KW 132KW 160KW KNN450*** KNN550*** 550A 700A 450A 550A 250KW 315KW KNN700*** 800A 700A Note: Replace *** with Voltage value : 400KW 110, 230, CONTACTOR COIL VOLTAGES KNN150 COILS & FEEDER GROUPS B02*** B022*** B031*** B041*** B51*** B61*** for KNN80 KNN95 for KNN110 for KNN150 KNN175 for KNN210 KNN315 for KNN450 KNN550 for KNN700 used in conjunction with } a Feeder Group below FG51*** FG61*** for KNN450 KNN550 for KNL700 Feeder Group Feeder Group Note: Replace *** with Voltage value : 110, 230, 400 CONTACTOR DESCRIPTION AUXILIARY CONTACT BLOCKS GH15S11 GH15T01 GH15T10 GH15T11 GH15T22 GH15T31 for KNN80 KNN315 for KNN80 KNN110 for KNN80 KNN110 for KNN80 KNN315 for KNN80 KNN315 for KNN80 KNN315 3NO + side mount KNN550 ACCESSORIES AND SPARES BM0H BM3H BM5H BM6H for KNN80 KNN95 for KNN110 KNN315 for KNN450 KNN550 for KNN GH15T11 CS80 CS95 CS110 CS150 CS175 CS210 CS260 CS315 CS450 CS550 CS700 for KNN80 for KNN95 for KNN110 for KNN150 for KNN175 for KNN210 for KNN260 for KNN315 for KNN450 for KNN550 for KNN All s Exclude VAT and are subject to change without prior notice. 1.4
5 THERMAL OVERLOADS CONTACTOR OVERLOADS for KNL9 KNL30 RANGE TRB14 Series for KNL9 KNL30 (Discontinued Replaced by BR16 Series) TRB TRB TRB14161 TRB for KNL9 KNL16 for KNL9 KNL16 for KNL9 KNL16 for KNL9 KNL BR16 Series for KNL9 KNL30 TRB14 BR16 BR160.4 BR160.5 BR BR160.8 BR161 BR161.3 BR161.6 BR162 BR162.5 BR163.2 BR164 BR164.8 BR166.3 BR167.5 BR1610 BR BR1616 BR1620 for KNL9 KNL16 for KNL9 KNL16 for KNL9 KNL16 for KNL9 KNL16 for KNL9 KNL16 for KNL9 KNL16 for KNL9 KNL16 for KNL9 KNL16 for KNL9 KNL16 for KNL9 KNL16 for KNL9 KNL16 for KNL9 KNL16 for KNL9 KNL16 for KNL9 KNL16 for KNL9 KNL16 for KNL9 KNL16 for KNL9 KNL16 for KNL9 KNL BR BR3025 BR3030 for KNL22 KNL30 for KNL22 KNL30 for KNL22 KNL BR43 Series OVERLOADS for KNL43 KNL63 BR4321 BR4330 BR4343 BR4363 for KNL43 KNL63 for KNL43 KNL63 for KNL43 KNL63 for KNL43 KNL CTx / THERMAL OVERLOADS for KNN80 KNN315 BR43 ISCT80 ISCT100 ISCT150 ISCT200 ISCT250 ISCT300 ISCT400 Larger sizes available on request for KNN80 KNN315 for KNN80 KNN315 for KNN80 KNN315 for KNN80 KNN315 for KNN80 KNN315 for KNN80 KNN315 for KNN80 KNN BR6 Series OVERLOADS for KO7M MINI CONTACTOR BR6 BR61.3 BR61.9 BR62.8 BR64 BR66 BR All s Exclude VAT and are subject to change without prior notice. 1.5
6 elma tt PLUGIN RELAYS & BASES TRP68 & TRP69 AC SERIES TRP AC TRP AC TRP AC TRP AC DESCRIPTION TRP6 Series INDUSTRIAL CONTROL RELAYS Fitted with test key and flag indication. Series 68 8 pin plugin Relays (10 amp rating) 12v AC, 8 pin plugin relay with 2 C/O contacts 24v AC, 8 pin plugin relay with 2 C/O contacts 110v AC, 8 pin plugin relay with 2 C/O contacts 230v AC, 8 pin plugin relay with 2 C/O contacts TRP DC TRP DC TRP DC 12v DC, 8 pin plugin relay with 2 C/O contacts 24v DC, 8 pin plugin relay with 2 C/O contacts 230v DC, 8 pin plugin relay with 2 C/O contacts TRP68 & TRP69 DC SERIES Series pin plugin Relays (10 amp rating) TRP AC TRP AC TRP AC TRP AC 12v AC, 11 pin plugin relay with 3 C/O contacts 24v AC, 11 pin plugin relay with 3 C/O contacts 110v AC, 11 pin plugin relay with 3 C/O contacts 230v AC, 11 pin plugin relay with 3 C/O contacts TRP DC TRP DC TRP DC DIN / Surface Bases ES8 ES11 12v DC, 11 pin plugin relay with 3 C/O contacts 24v DC, 11 pin plugin relay with 3 C/O contacts 230v DC, 11 pin plugin relay with 3 C/O contacts for 8 pin plugin relay for 11 pin plugin relay ES SERIES ROUND PIN BASE TRP3 Series MINIATURE CONTROL RELAYS Fitted with test & lock key, & LED indication. Series pin flat plugin Relays (10 amp rating) TRP AC TRP AC TRP AC TRP AC 12v AC, 8 pin flat plugin relay with 2 C/O contacts 24v AC, 8 pin flat plugin relay with 2 C/O contacts 110v AC, 8 pin flat plugin relay with 2 C/O contacts 230v AC, 8 pin flat plugin relay with 2 C/O contacts TRP31 AC SERIES TRP DC TRP DC 12v DC, 8 pin flat plugin relay with 2 C/O contacts 24v DC, 8 pin flat plugin relay with 2 C/O contacts Series pin flat plugin Relays (5 amp rating) TRP AC TRP AC TRP AC TRP AC 12v AC, 14 pin flat plugin relay with 4 C/O contacts 24v AC, 14 pin flat plugin relay with 4 C/O contacts 110v AC, 14 pin flat plugin relay with 4 C/O contacts 230v AC, 14 pin flat plugin relay with 4 C/O contacts TRP31 DC SERIES TRP DC TRP DC 12v DC, 14 pin flat plugin relay with 4 C/O contacts 24v DC, 14 pin flat plugin relay with 4 C/O contacts DIN / Surface Bases ES14/2 ES14/4 for 8 pin flat plugin relay for 14 pin flat plugin relay ES15 SERIES FLAT PIN BASE D.C. Relays are polarity protected 8 pin: "+" = pin 2 "" = pin 7 11 pin: "+" = pin 2 "" = pin 10 All s Exclude VAT and are subject to change without prior notice. 1.6
3RA13, 3RA14 Contactor Assemblies
RA1, RA Contactor Assemblies RA1 complete units,... kw Overview The RA1 reversing contactor assemblies can be ordered as follows: Sizes S00 to S Fully wired and tested, with mechanical and electrical interlock
Table of Specifications
Table of Specifications Midi-Contactors 3-Pole Magnetic Contactors Terminal type CC9 CC12 CC18 CC22 CC32 CC40 Screw Only Screw Only GUA1, GUA2, GUA4 GUA-1 GUA-2, GUA-4 GUA-1 GUA-2, GUA-4 GT Type Thermal
Mini Contactors & Overloads
108 Mini s & Overloads GMC-12M Surface or DIN rail mountable UL508 compliant 1/ to 7-1/ 50/60Hz AC and DC versions available Direct-mounting overloads RoHS compliant Auxiliary contacts standard (1 N.0.)
Mini contactors. K 3-pole contactors for motor control, 6 and 9 A Utilisation category AC-3 Control circuit : a.c. a.c. control contactors (1)
K 3-pole contactors for motor control, 6 and 9 A Utilisation category AC-3 Control circuit : a.c. c LC-K060ii a.c. control contactors () Standard power ratings Rated Type of Instantaneous Basic reference.
XT IEC Power Control Contactors, Starters and Overload Relays
May 00 Product Family Overview 9 Contents Features and Benefits Description Page Contactors and Starters Catalog Number Selection................. Non-reversing Contactors.... Reversing Contactors........
Contactors and Contactor Assemblies
RT contactors, size S00 The product range at a glance The new generation is a complete, modular system family, logically designed right down to the last detail, from the basic units to the accessories.
29 $ Manual Motor Starters FREESHIPPING. MOTOR CONTROLS 25. Features: MMS-32H Frame. MMS-63H Frame.
www.factorymation.com/motorcontrols MOTOR CONTROLS 25 Manual Motor Starters High interrupt capacity Din rail and surface mounting Lockable handle (OFF position) IP20 finger safe terminals Class 10 thermal
Contactors and Contactor Assemblies
Contactor Industrial Controls Product Catalog 07 Section c o n t e n t s Section Overview / - /5 Product Overview /6 - /7 Contactors 3RT0, 3-pole to 95 /8 3RT0, 3-pole to 500 /9 3RT, 3-pole Vacuum to 500
C E R T I F I C A T E O F C O M P L I A N C E
Issued to: SIEMENS AG I IA CE CP R&D-VI 4 WERNER-VON-SIEMENS-STRASSE 48 92220 AMBERG GERMANY This is to certify that representative samples of Motor Controllers, Magnetic (See following pages for additional
EU Declaration of Conformity
Product: Name and address of the manufacturer: Rockwell Automation Inc. 101 South nd Street Milwaukee, WI 5304 U.S.A. EU Declaration of Conformity IEC Contactors, Reversing Contactors and Accessories Name
Motor protection relays
Thermal overload relays for currents between 0.09 and 420A Electronic thermal overload relays for currents between 0.4 and A Electronic thermal overload relays with selectable tripping class: 5--20-30
Starters. Power. Manual Motor Low Voltage Starters 600, 609, 609U, 609TU. 600 Manual Starting Switches 609 Manual Starting Switches
Starters Manual Motor Low Voltage Starters 600, 609, 609U, 609TU Compact design Undervoltage protection Manual operation with overload protection Ideal for low HP applications, up to 10 HP three phase
IMS Control & EPR, We keep your motors running ABB s new control & protection devices up to 18.5 kw / 20 hp
IMS Control & EPR, 2010 01 29 We keep your motors running ABB s new control & protection devices up to 18.5 kw / 20 hp October 27, 2010 1SBC101089D0201 ABB s new control and protection devices Up to 18.5
Motor Control Products Selection Guide
MKING MODERN LIVING POSSIBLE Motor Control Products Selection Guide Contactors, Relays, and Circuit Breakers www.danfoss.com/ia c o n t e n t s Minicontactors CI 5 Thermal Overload Relays TI 9C for Minicontactors
Mini Contactors. Mini Contactor Relays 4-pole 20 Auxiliary Contact Blocks. Interface Contactor Relays. Mini Contactors 22 Auxiliary Contact Blocks
Mini Contactors Mini Contactor Relays 4-pole 20 Auxiliary Contact Blocks Interface Contactor Relays Mini Contactors 22 Auxiliary Contact Blocks Mini Contactors With Fast On Tab Connectors 24 Mini Contactors
sirius Switching. Protecting. Starting. SIRIUS Product Overview
sirius Switching. Protecting. Starting. SIRIUS Product Overview S00 Design Direct-on-line starting Reversing duty Assembly kit for busbar mounting 0 mm: RA9 -C 0 mm: RA9 -D Consisting of: wiring kit busbar
IEC Contactors. Auxiliary Contact Blocks GENERAL
IEC Contactors Auxiliary Contact Blocks GENERAL Description 3RH19 Auxiliary contact blocks The 3RH19 auxiliary contact blocks are available in 1, 2, 3 and 4-pole front mount versions and 2-pole side mount
IDE Load break switches for machine control Remotely trippable switch from 32 to 160 A
The solution for Load break switches > Industry. > Non critical buildings. > Public Access Sites. > High Rise Buildings. ide_021_a_1_cat ide_022_a_1_cat IDE 4x40 A External operation IDE 4x40 A Direct
pointofsale available at your local trade outlet
pointofsale available at your local trade outlet pointofsale products IP65 pushbuttons Ø22.5mm Contact rating @ 240V AC 10A Resistive (AC1), 6A (AC15) PB01C PB02C PB03C PB04C PB05C PB06C PB07C PB08C PB09C
WMS SUPPLEMENTARY PROTECTORS
WMS Supplementary Protectors Overview WMS SUPPLEMENTARY PROTECTORS Product Specification The WMS Supplementary Protector is a dual-rated product for both AC and DC supplies, in accordance with UL 1077
CS7 Industrial Control Relays
CS7 Industrial Control Relays Reliable, general purpose relays for heavy duty applications The base four pole CS7 relay can be expanded up to twelve poles with the addition of front and side mount auxiliaries
CS8 Industrial Control Relays
CS8 Industrial Control Relays Despite increasing complexity, control systems and installations must become increasingly compact. And the CS8 Miniature Relay System packs maximum performance into minimum
Overvoltage Protection
Overvoltage Protection Weidmuller has a complete line of overvoltage protection devices to effectively stop the harmful effects of electrical overvoltage and electrical noise. There is strong potential
IEC Power Control Contactors and Contactor Assemblies
IEC Power Control Contactors and Contactor ssemblies Contents Pages Contents Pages Section Overview......................... / - /5 Product Overview......................... /6 - /7 Contactors 3RT0 / 3RT0,
Large Frame IEC Contactors
Large Frame IEC Contactors Bulletin 100-E PUBLIC Copyright 2017 Rockwell Automation, Inc. All Rights Reserved. 1 Changing Applications for Contactors There are fewer and fewer traditional large motor starting
3 Pole Contactors with AC operating coils
1 3 Pole Contactors with AC operating coils Characteristics General Characteristics Switching Current 9A ~ Rated insulation voltage (Ui) (Conforming to IEC 158-1) V 750 IEC 60947-4 V 1000 Conforming to
Micro Contactor MA Series
Relay-sized contactor, making it the world s smallest >3mm contact clearance acc. to IEC 60335-1 for Safety Applications Reversing contactor with mechanical interlock 3 Pole and 1 Aux. Contact NO or NC
63 to 125 A. Functions. Conformity standards. General characteristics. Changeover switches SIRCO VM1 changeover switches.
comut_004_a_1_cat Changeover switches switches 63 to 125 A switches are manually operated three or four pole switches. They provide, source inversion or switching under load between two low voltage power
194E FA 32 E P11 P11 6
Bulletin E IEC Load Switches, A Product Selection/Catalog Number Explanation Bulletin E Enclosed Disconnect Load Switches with R Handles (with Defeater, suitable for padlocks) E-FA Painted Steel Enclosure
Time Counters mini "h", DC Version
Type 633-DC Time Counters mini "h", DC Version Type 633.0 Type 633.7 Type 633.8 High shock resistance Miniature dimensions Electrical connections in standard grid Suitable for PCB mounting Machine-solderable
3RT, 3TB, 3TF Contactors for Switching Motors
RT, TB, TF Contactors for Switching Motors Overview RT contactors and coupling relays Size S00 with mountable accessories The SIRIUS generation of controls is a complete, modular system family, logically
Allen-Bradley Drives
Overview/Product Selection Bulletin IEC Industrial Safety Relay Positively Guided/Mechanically Linked as Per IEC 947-5-1 Annex L Third Party Certification By SUVA Red Cover and Mechanically Linked Contact
RiLine Compact The smart power distribution system
RiLine Compact The smart power distribution system 2 Power distribution in a confined space Rittal are the leading suppliers of reliable power distribution and backup systems for controlgear. The new RiLine
Allen-Bradley Bulletin 100 Contactors
Allen-Bradley Bulletin 100 Contactors An integrated portfolio of IEC Contactors that save panel-space and energy Features and Benefits: Direct-on-line and reversing contactors Built-in surge suppression
Product Description. Table of Contents
Product Providing users with easy installation in mechanical fan and pump systems, the Allen-Bradley PowerFlex 400 AC drive offers a wide range of built-in features allowing for seamless building system
Magnetically Actuated Safety Interlock Switches
Rev. 7.07 C US Conforms to EN1088, EN292, EN6020-1 CSA approved MA Series Magnetically Actuated Safety Interlock es Large selection choose from a large selection of contact configurations housed in plastic
Approved Standards. Motor Protection Circuit Breaker (MPCB) J7MN. MPCB system (motor protection CLASS 10) Auxiliary contact modules.
Motor Protection Circuit Breaker (MPCB) J7MN MPCB system (motor protection CLSS 0) Rotary and switch types Rated operational current = 2, 25, 50 and 00 Switching capacity up to 2.5 = 00 k/400 V Fixed short-circuit
Motor protection circuit breakers
R Motor protection circuit breakers Motor protection circuit breakers are used for start-up and protection of electric motors (industry, small machines, external use, agricultural machines, compressors,
onlinecomponents.com
ccessories Field Installable Top (Front) Mount uxiliary Contact Blocks ➊ Contact Block NO NC Top mount auxiliary contact blocks snap-on to the top (front) of any contactor 4-pole auxiliary 2-pole auxiliary
Contactors and Contactor Assemblies
SIRIUS Contactors and Contactor Assemblies Application WYE-delta starting can only be used either if the motor normally operates in a d (delta) connection or starts softly or if the load torque during
Approved Standards. Motor Protection Circuit Breaker (MPCB) J7MN. MPCB system (motor protection CLASS 10) Auxiliary contact modules.
Motor Protection Circuit Breaker (MPCB) J7MN MPCB system (motor protection CLSS 0) Rotary and switch types Rated operational current = 2, 25, 50 and 00 Switching capacity up to 2.5 = 00 k/400 V Fixed short-circuit
TeSys contactors From 115 to 2750 A
Selection guide From to 0 A Applications Control of all types of motor for standard or severe duty applications Control of resistive, inductive and capacitive circuits: heating, lighting, cos j rectification,
References. References. Rating (A) Référence
DIRECT OPERATION T O O R D E R EXTERNAL OPERATION picto_080_c_1_gb Switch body Direct Switch body + handle + Shaft + + OTHER ACCESSORIES External handle acces_128_a_1_cat acces_129_a_1_cat Direct handle
NC2 Contactor, 115~630A. 1. General. 2. Type Designation. 3. Terminal Connection. Cabling(Cu) Cable 2. Tightening torque (N m) Screw size
R C US LISTED EU Germany Czech Ukrain South Africa USA NC Contactor, 5~30A. General. Certificates: CE, VDE, ESC, UKRTEST, RCC, UL.. Electric ratings; AC50/0Hz, up to 000V, up to 30A;.3 Application: remote
0 1 CA7 all CA7-PA CA7 all CA7-PA CA7 all CA7-PA CA7 all CA7-PA CA7 all CA7-PA-20 27
ccessories Field Installable C7 Top (Front) Mount uxiliary Contact Blocks Contact Block NO NC 0 2 Contact rrangement 5161 5262 with... Standard Contacts Catalog Number Price Bifurcated Contacts Catalog
Enclosed Non-Reversing Combination Controller, AC Operation - Type 1/12K/IP66 ➏➐ (KS7-C0C4R) Discount Schedule F-1
KWIKstarter/CX7 CX7 Non-Reversing Combination Controller, AC Enclosed Non-Reversing Combination Controller, AC Operation - Type 1/12K/IP66 ➏➐ ~ ~ ~ ~ 0.10 0.16 2.1 1 CX7-9-10- -AS0.16A-A10-PG 551 Q4 ~
High Voltage Contactors
High Voltage Contactors Contents Page 1.0. Application...3 2.0. Power Rating...3 3.0. Device Data...4 3.1. Electronic Contactor Type ZH 767E / 767F... 4 3.2. Contactor Type ZH 829...5 3.3. Contactor ZH
Molded Case Circuit Breakers and Disconnect Switches Auxiliary Contacts for Type NZMH4-...
Circuit Breakers, 09/054 Moeller Electric Corporation Auxiliary Contacts for Type Contacts Type Suffix Price N.O. = normally open N.C. = normally closed when ordering with basic N.O. N.C. Standard auxiliary
Timers & control relays
7% Timers & control relays J PCB mount relays Finder J-1 3 Plug-in relays Finder J-2 8 Power relays Finder J-7 Stepping relays Finder J-9 Modular contactors Finder J-10 Relay interface modules Finder J-11
Controls Contactors and Contactor Assemblies
Dimensional drawings RT10 contactors, -pole RT10 1 contactors, size S00 with surge suppressor, auxiliary switch block and mounted overload relay 4, 8,6 67 99 106 9 ) Lateral distance to grounded components
Safety Contacts: AC models MA-1 thru 5, 10, 12, 13, 16 1 N/C MA-13, 16, 21 2 N/C DC models MA-12, 13, 14, 16 1 N/C MA-13, 15, 16, 20, 21 2 N/C
r Safety Interlock Switches MA Series MA Magnetically Actuated Safety Interlock Switches Large selection choose from a large selection of contact configurations housed in plastic to satisfy most application
For full product information, visit Use the SpeedSpec code or scan the QR Code for quick access to the specific web page.
R Safety Interlock Switches MA Series MA For full product information, visit www.sti.com. Use the SpeedSpec code or scan the QR Code for quick access to the specific web page. Magnetically Actuated Safety
CS7 Industrial Control Relays
CS7 Industrial Control Relays Reliable, general purpose relays for heavy duty applications The base four pole CS7 relay can be expanded up to twelve poles with the addition of front and side mount auxiliaries
For full product information, visit Use the SpeedSpec code or scan the QR Code for quick access to the specific web page.
R Safety Monitoring Relays For full product information, visit www.sti.com. Use the SpeedSpec code or scan the QR Code for quick access to the specific web page. Dual-Channel Safety Monitoring Relay Power
PERFORMANCE SPECIFICATION
INCH-POUND MIL-PRF-6106/13F 17 November 2011 SUPERSEDING MIL-PRF-6106/13E 10 November 2000 PERFORMANCE SPECIFICATION RELAY, ELECTROMAGNETIC, 25 AMPERE, 3PST, NO, WITH 2 AMPERE 1PDT AUXILIARY CONTACTS,
Switch Disconnectors, Main and EMERGENCY-STOP Switches
General data Overview Siemens G 2010 1 2 3 NSE0_01931b 4 5 6 7 1 uxiliary switch (3SB for 3K; 3KX for 3KE) 2 IP20 terminal cover (Operator side) 3 3K switch disconnector 4 rcing contacts (only for 3KE)
TeSys contactors Component parts for assembling reversing contactors for motor control or low speed - high speed starters
Component parts for assembling reversing contactors for motor control or low speed - high speed starters For 3-pole motor reversing contactors using identical contactors 810373 Contactors with screw clamp
Enclosed Non-Reversing Combination Controller, AC Operation - Type 1/12K/IP66 ➏➐. Non-Metallic Type 1/12K/IP66 Enclosure (KS7-C0C4R)
KWIKstarter/CX7 CX7 Non-Reversing Combination Controller, AC Enclosed Non-Reversing Combination Controller, AC Operation - Type 1/12K/IP66 ➏➐ Catalog Number ➍➏➑➒ ~ ~ ~ ~ 0.10 0.16 2.1 1 CX7-9-10- -AS0.16A-A10-PG
SOCOMEC SIRCOVER MANUALLY OPERATED CHANGEOVER SWITCHES
MANALL OPERATED CHANGEOER SWITCHES are manually operated multipolar changeover switches. They changeover between two low voltage power circuits under load and provide safety disconnection. Application:
Solid-state Timer. Ordering Information. Specifications. Miniature Timer Compatible with the MY Relay. Accessories. Time Ranges
Solid-state Timer Miniature Timer Compatible with the MY Relay Large transparent time-setting knob facilitates time setting. Flat-blade and Phillips screwdrivers can also be used for time setting. Approved
Magnetically Actuated Safety Interlock Switches
Conforms to EN10, EN292, EN020-1 CSA and BG approved Actual Size Magnetically Actuated Safety Interlock Switches Large selection choose from a large selection of contact configurations housed in plastic,
Manual Motor Protectors
94 www.factorymation.com/motorcontrols MOTOR CONTROLS Manual Motor Protectors 30 IMM16 Frame IMM32 Frame IMM65 Frame E468295 E468295 High interrupt capacity up to 100kA (with optional current limiter)
Safety Systems Safety Integrated
3SE2 / SE3 Molded plastic /metal enclosure with separate actuator Application Safety interlock switches with separate actuator are used where the position of doors, covers or safety screens must be monitored
Exercise 1-4. Contactors and Control Relays EXERCISE OBJECTIVE DISCUSSION OUTLINE DISCUSSION
Exercise 1-4 Contactors and Control Relays EXERCISE OBJECTIVE Identify the characteristics of control relays and contactors. DISCUSSION OUTLINE The Discussion of this exercise covers the following points:
Controls Enclosed Non-Combination Starters - PESW Series
NEMA 4/4X Non Metallic Enclosure Product Features WEG offers non-reversing and non-combination NEMA-4X magnetic starter up to 75HP at 460V. Featuring components that meet IEC design standards and UL horsepower
Monitor. Safety relay,etc. Contactor, etc. Uses external device monitoring function Note: Construct a separate reset input circuit.
Selectable safety circuits The light curtain unit has a built-in monitoring function for external devices (such as fused relay monitoring). This supports the construction of light curtain peripheral safety
K-Line Mini - Contactors, Overload Relays and Accessories
K-Line Mini - Contactors, Overload Relays and Accessories Class 8502 CONTENTS Description...................................................... Page General Information...............................................
Advantages of a Full Featured 700 Series Relay
SECTION 1 Advantages of a Full Featured 700 Series Relay Since the launch of the 700 series relays in 2000, this product line has continuously evolved both functionally and visually. The 700 series product
MG24434 Supplementary Protector SUPPLEMENTARY PROTECTOR, 240VAC, 16A, CIRCUIT BREAKER TYPE: STANDARD
United States MG24434 Supplementary Protector SUPPLEMENTARY PROTECTOR, 240VAC, 16A, CIRCUIT BREAKER TYPE: STANDARD Product Information Features and Specifications For Use With: OEM Panels Approvals: UL
Issued February DATA SHEET 5SX2 MCB. Based on Siemens Industrial Control Catalog
Issued February 2011 DATA SHEET 5SX2 MCB Based on Siemens Industrial Control Catalog General Data Trip characteristics Tripping characteristics acc. to EN 60 898 Tripping characteristic A, -5 Type A characteristic
Circuit Breakers Type CTI 25M, CTI 45MB
Data sheet Circuit Breakers Type CTI 25M, CTI 45MB Circuit breakers for short circuit and overload protection of motor applications cover the current range 0.1 45 A (AC-3 rating). The product range is
4 C/O. Contact material AgNi AgNi gold-plated Nominal contact current Inrush current
Quattro-Relais Quattro Relay 4 Quattro Relay 4A4 Standard type / With LED and protection diode on request Quattro-Relais Order Code Order Code Quattro Relay 4 A 4 4 V DC N Type of relay Quattro Relay 4
New Solutions. for AC Motor Starters
ADAPTABILITY RELIABILITY CREATIVITY New Solutions for AC Motor Starters Featuring : Electronic Centrifugal Switches for Capacitor Start (Capacitor Run) Motors / Digital Motor Starters for Three Phase Bidirectional
Eclipse MCi. Variable Speed Drive Controller with Eclipse Operating System (EOS) 3rd Edition. VSD kits suitable for motors ranging from 0.4 to 2.
3rd Edition Variable Speed Drive Controller with Eclipse Operating System (EOS) Eclipse MCi VSD kits suitable for motors ranging from 0.4 to 2.2 kw www.elsema.com Controller with Eclipse Operating System
3RM1 Hybrid Starters 6SIRIUS. contents. Industrial Controls Product Catalog 2017
3RM1 Hybrid Starters Industrial Controls Product Catalog 2017 Section contents 3RM1 Compact - Hybrid Starters Overview /2 General Data /3 Selection and ordering data /4 Accessories /5 - /9 Technical Data
Molded Case Circuit Breakers and Disconnect Switches Auxiliary Contacts for NZM(H)6(B)-...
Circuit Breakers, Disconnect Switches, Molded Case Switches 09/064 Moeller Electric Corporation Auxiliary Contacts for. Contacts Type Suffix Price N.O. = normally open N.C. = normally closed when ordering
Miniature Circuit-Breaker IEC Series 8562
> 1 to 3 pole versions > Rated current from 0.5... 40 A > 6 or 10 ka breaking capacity to DI VDE 0641, respectively E 60898 > Isolating Function to E 60947-2 > Permanently set thermal and magnetic trips
EC Declaration of Conformity
The undersigned, representing the manufacturer Rockwell Automation uchserstr. 7 CH-5000 Aarau, Switzerland herewith declare that the Products Product identification (brand and catalogue number/part number):
Experiment #2 PLC Input Output Wiring Methods. OBJECTIVES After successfully completing this laboratory, you should be able to:
Experiment #2 PLC Input Output Wiring Methods OBJECTIVES After successfully completing this laboratory, you should be able to: Read and explain the nameplate of DELTA s PLC DVP Series Model. Make different
Supplementary Circuit Protectors Type GSB63
Supplementary Circuit Protectors Type GSB63 l Protection of circuits against short circuit and overload currents l UL1077 supplementary protection l 1,, 3 and 4 pole arrangements l 13 amperage sizes up
Discover TeSys U motor starters open version Starter-controller Non-reversing power bases
Discover TeSys U motor starters open version Starter-controller Non-reversing power bases DB0 DB0 LUB, LUB LUB 0, LUB 0 Two types of bases are available, each in two versions: b LUB, LUB Standard power
Model Pole Rated Current (A)
1.) Molded Case Circuit Breaker (Fuji Electric) Molded Case Circuit Breaker Global Twin (NEW series) 2 Poles MCCB Model Pole Rated Current (A) Interrupting Capacity (ka) IEC 947-2 230 VAC 380 VAC (Bath)
SED2 Variable Frequency Drives with Electronic (E) Bypass Options
SED2 Variable Frequency Drives with Electronic (E) Options Description The E- Options are companion packages for the family of SED2 Variable Frequency Drives (s). For information on the family of SED2
Quantum III. Compact DC Drive Package. Slitter DC Drive Package. Quantum III
Compact DC Drive Package The delivers a DC drive package that integrates the intelligence of the Mentor II with a space saving design that incorporates many accessories typically required in the North
1.1. Contactors and Starters... Contents Description Relays and Timers... Miniature Controls... Manual Motor Protectors. XT IEC Power Control
. Contents Description Relays and Timers......................... Miniature Controls......................... Contactors and Starters.................... Thermal Overload Relays.................... C440/XT
Fast Bus Fast Bus Busbar System
Fast Bus Busbar System Contents Fast Bus busbar adapter system mm system Page Selection and ordering data Busbar holders /9 Fast Bus adapter shoes /11 Incoming supply terminals /6 Copper busbar /6 Busbar
24973 Circuit Breaker MINIATURE CIRCUIT BREAKER, 440VAC, 10A, CIRCUIT BREAKER TYPE: STANDARD
United States 24973 Circuit Breaker MINIATURE CIRCUIT BREAKER, 440VAC, 10A, CIRCUIT BREAKER TYPE: STANDARD Image not available Product Information Features and Specifications Approvals: IEC 60947-2 Rated
Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers
Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers Hydraulic/Magnetic Circuit Breaker B-Series B-Series PDF elibrary The B-Series hydraulic/magnetic circuit breakers are compact and
920 Remote Control (RC) Switches
920 Remote Control (RC) Switches ASCO is the global leader in power switching and controls ASCO 920 PRODUCT SPECIFICATIONS SWITCH ONLY (PANELBOARD MOUNTING) 1,2,3 () DIMENSIONS, IN.(MM) WIDTH HEIGHT DEPTH
Ordering Key. Type Rated Operational Rated operational Control Voltage Uc Options
otor Controllers AC Semiconductor otor Controller Type RSHR 3-Phase Soft starting and stopping of 3-phase squirrel cage motors Control of all 3 phases In Line or In Delta motor connection Low inrush and
AThink future. Switch to green. MCCB Panel Boards 400A / 630A / 800A.
www.moeller.co.uk MCCB Panel Boards 400A / 630A / 800A Product Catalogue and Selection Guide MCCB Panel Boards Moulded Case Circuit Breakers and Accessories XBoard Consumer Units XPole Miniature Circuit
Safety Monitoring Relays
Safety Monitoring Relays Contents Selection Guide I-2 Safety Monitoring Relays G9SA I-6 SR101A I-12 SR103AM I-13 SR104P I-17 SR105E I-17 SR106ED I-21 SR108AD & SR109AD I-18 SR120MP I-21 SR125SMS45 I-22
Circuit Breakers, Type CTI 25M, CTI 45MB, CTI 100
MAKING MODERN LIVING POSSIBLE Data sheet Circuit Breakers, Type CTI 25M, CTI 45MB, CTI 100 Circuit breakers for short circuit and overload protection of motor applications cover together with the circuit
COIL CHARACTERISTICS (Vdc) SERIES H,HD,HP,HT,HTD,HPT GENERAL CHARACTERISTICS. Date of issue: 06/ Page 2 of 5. B Vdc
ENGINEERING DATA SHEET CONTACTOR AMP BalancedForce Design Hermetically sealed Designed to the performance standards of MILPRF6 PRINCIPLE TECHNICAL CHARACTERISTICS Contacts rated at 8 and 5 Vac, 400 Hz,
SIRCO Load break switches for power distribution from 125 to 5000 A
The solution for Load break switches sirco_456_a_1_cat > Main switchboard > Distribution panel > Emergency breaking > Network coupling > Local safety breaking sirco-ac_001_a_1_cat SIRCO 3 x 250 A direct
Rated operational Control Voltage Uc Supply Voltage Connection Rated operational current 40 C voltage Ue Us 25A AC-53a 32A AC-53a
otor Controllers AC Semiconductor otor Controller Type RSHR 3-Phase Soft starting and stopping of 3-phase squirrel cage motors Control of all 3 phases In Line or In Delta motor connection Low inrush and
Protection Equipment
Protection Equipment Price groups 41B, 41E, 41F, 41G, 41H, 41J, 42F, 42J, 143, 401 /2 Introduction Motor starter protectors/ circuit breakers SIRIUS 3RV2 motor starter protectors up to 40 A / General data
MOTOR PROTECTION CIRCUIT BREAKERS
MOTOR PROTECTION CIRCUIT BREAKERS PAGE -2 PAGE -2 SMA Thermal trip adjustment ranges 9-32A (5 choices) Breaking capacity Icu at 400V: 50kA Suitable for mounting in consumer switchboards with minimum 58mm
SED2 Variable Frequency Drives Conventional Bypass (C-Bypass) Options
Submittal Sheet SED2 Variable Frequency Drives Conventional Bypass (C-Bypass) Options Description The Bypass Options are companion packages for the family of SED2 Variable Frequency Drives. For information
ASCO 920 Remote Control (RC) Switches
Maximum reliability and excellent value ASCO 920 Remote Control (RC) Switches ASCO 920 Remote Control Switch in Type Enclosure The ASCO 920 is designed as a feeder disconnect switch for load capacities