PP-R & PVC-U Products Catalogue
|
|
- Hilda Lewis
- 5 years ago
- Views:
Transcription
1 PP-R & PVC-U Products Catalogue
2 INDEX PP-R Products Page 3 PVC-U Products Page 7
3 Points To Pay Attention When Installing Ppr Pipes And Fittings Due to their brittle characteristic and behavior below 0 C, pipes should not be used where water can freeze in pipes, or they should be prevented from freezing. PPR pipes and fittings should not be exposed to sunlight (UV). During the installation, products should be kept away from sharp objects. Before welding, pipes and fittings should be cleaned. Damaged pipes and pipes with cut/cracked ends should not be used. Products should be protected against hits and shocks Use only sharp tools for cutting pipes. Welding length should be marked on pipe before welding. Open fire should not be used to heat the pipes. Welding waiting time should be followed. During melting and after welding, pipe and fittings definitely should not be turned. Welding die should be cleaned before use, and dies with damaged coating should not be used. Excessive tightening should be avoided for metal fittings. To prevent leakage, teflon tape should be used. Plastic end-plugs should be used instead of metal end-plugs. After finishing pipe installation, leakage test must be done according to testing instructions which are in our technical information sheet on our website or you could procure the technical information leaflet at your distributor. After the leakage test, the water in the installation should be completely emptied against the danger of freezing. Pipe and fittings installed outside buildings should be protected from sunlight (UV) and freezing. Further technical information is available on our website or at your distributor s. We strongly recommend you to check our website link below before usage: PP 3
4 PP TUBE PN HD.BP..0 HD.BP..0 HD.BP..0 HD.BP..0 HD.BP..0 HD.BP..063 HD.BP..07 HD.BP..090 HD.BP.. x,9 x,3 x,9 x 3,7 x,6 63 x, 7 x 6, 90 x, x,0 PP TUBE PN HD.BP..0 HD.BP..0 HD.BP..0 HD.BP..0 HD.BP..0 HD.BP..063 HD.BP..07 HD.BP..090 HD.BP.. x, x 3, x, x, x 6,9 63 x,6 7 x,3 90 x,3 x, PP TUBE PN HD.BP..0 HD.BP..0 HD.BP..0 HD.BP..0 HD.BP..0 HD.BP..063 HD.BP..07 HD.BP..090 HD.BP.. x 3, x, x, x 6,7 x,3 63 x, 7 x, 90 x,0 x,3
5 PP TUBE AL FOILED PN HD.BF..0 HD.BF..0 HD.BF..0 HD.BF..0 HD.BF..0 HD.BF..063 HD.BF..07 HD.BF..090 HD.BF.. x, x 3, x, x, x 6,9 63 x,6 7 x,3 90 x,3 x, PP TUBE AL FOILED PN HD.BF..0 HD.BF..0 HD.BF..0 HD.BF..0 HD.BF..0 HD.BF..063 HD.BF..07 HD.BF..090 HD.BF.. x 3, x, x, x 6,7 x,3 63 x, 7 x, 90 x,0 x,3
6 PP GLASS FIBER TUBE PN HD.BG..0 HD.BG..0 HD.BG..0 HD.BG..0 HD.BG..0 HD.BG..063 HD.BG..07 HD.BG..090 HD.BG.. x, x 3, x, x, x 6,9 63 x,6 7 x,3 90 x,3 x, PP GLASS FIBER TUBE PN HD.BG..0 HD.BG..0 HD.BG..0 HD.BG..0 HD.BG..0 HD.BG..063 HD.BG..07 HD.BG..090 HD.BG.. x 3, x, x, x 6,7 x,3 63 x, 7 x, 90 x,0 x,3 PP TUBE MID - LAYER AL FOILED PN HD.BS..0 HD.BS..0 HD.BS..0 HD.BS..0 HD.BS..0 HD.BS..063 HD.BS..07 HD.BS..090 HD.BS.. x 3, x, x, x 6,7 x,3 63 x, 7 x, 90 x,0 x,3 6
7 PP COUPLING HD.FP.CP.0 HD.FP.CP.0 HD.FP.CP.0 HD.FP.CP.0 HD.FP.CP.0 HD.FP.CP.063 HD.FP.CP.07 HD.FP.CP.090 HD.FP.CP PP TEE HD.FP.TEE.0 HD.FP.TEE.0 HD.FP.TEE.0 HD.FP.TEE.0 HD.FP.TEE.0 HD.FP.TEE.063 HD.FP.TEE.07 HD.FP.TEE.090 HD.FP.TEE PP CROSS HD.FP.TC.0 HD.FP.TC.0 HD.FP.TC.0 0 7
8 PP O ELBOW HD.FP.EL.0 HD.FP.EL.0 HD.FP.EL.0 HD.FP.EL.0 HD.FP.EL.0 HD.FP.EL.063 HD.FP.EL PP 90 O ELBOW HD.FP.EL90.0 HD.FP.EL90.0 HD.FP.EL90.0 HD.FP.EL90.0 HD.FP.EL90.0 HD.FP.EL HD.FP.EL90.07 HD.FP.EL HD.FP.EL PP O TAIL ELBOW HD.FP.ET.0 HD.FP.ET PP 90 O TAIL ELBOW HD.FP.ET90.0 HD.FP.ET
9 9 PP UNEQUAL TEE HD.FP.U. HD.FP.U. HD.FP.U. HD.FP.U. HD.FP.U. HD.FP.U. HD.FP.U. HD.FP.U. HD.FP.U. HD.FP.U. HD.FP.U. HD.FP.U. HD.FP.U. HD.FP.U. HD.FP.U. HD.FP.U. HD.FP.U. HD.FP.U.6363 HD.FP.U.6363 HD.FP.U.6363 HD.FP.U.6363 HD.FP.U.6363 HD.FP.U.77 HD.FP.U.77 HD.FP.U.77 HD.FP.U.77 HD.FP.U.77 HD.FP.U.7637 HD.FP.U.9090 HD.FP.U. HD.FP.U // // // // // // // // // // // // // // // // // 63//63 63//63 63//63 63//63 63//63 7//7 7//7 7//7 7//7 7//7 7/63/7 90//90 // /63/
10 PP REDUCER HD.FP.RD. HD.FP.RD. HD.FP.RD. HD.FP.RD. HD.FP.RD. HD.FP.RD. HD.FP.RD. HD.FP.RD. HD.FP.RD. HD.FP.RD. HD.FP.RD.63 HD.FP.RD.63 HD.FP.RD.63 HD.FP.RD.63 HD.FP.RD.63 HD.FP.RD.7 HD.FP.RD.7 HD.FP.RD.7 HD.FP.RD.7 HD.FP.RD.7 HD.FP.RD.763 HD.FP.RD.90 HD.FP.RD.9063 HD.FP.RD.907 HD.FP.RD.3 HD.FP.RD.7 HD.FP.RD / / / / / / / / / / 63/ 63/ 63/ 63/ 63/ 7/ 7/ 7/ 7/ 7/ 7/63 90/ 90/63 90/7 /63 /7 /90
11 PP BRIDGE WITH CONNECTIONS HD.FP.BRE.0 HD.FP.BRE.0 HD.FP.BRE.0 PP BRIDGE HD.FP.BRP.0 HD.FP.BRP.0 HD.FP.BRP.0 HD.FP.BRP.0 90 PP C BRIDGE HD.FP.BRC.0 HD.FP.BRC.0 HD.FP.BRC.0 0
12 PP BLANKING CAP HD.FP.CBB.0 HD.FP.CBB.0 HD.FP.CBB.0 HD.FP.CBB.0 HD.FP.CBB.0 HD.FP.CBB.063 HD.FP.CBB.07 HD.FP.CBB.090 HD.FP.CBB PP END PLUG HD.FP.CBE.0 HD.FP.CBE.0 HD.FP.CBE HD.FP.CBL.0 (LONG) 0 PP PIPE CLIPS HD.FP.CLS.0 HD.FP.CLS.0 HD.FP.CLS.0 HD.FP.CLS.0 HD.FP.CLS PP DOUBLE PIPE CLIPS HD.FP.CLD.0 HD.FP.CLD.0 HD.FP.CLD
13 PP FEMALE ELBOW HD.FM.ELF. HD.FM.ELF. HD.FM.ELF. HD.FM.ELF. HD.FM.ELF. HD.FM.ELF. HD.FM.ELF. HD.FM.ELF. X / X 3/ X / X 3/ X / X 3/ X X / 7 PP MALE ELBOW HD.FM.ELM. HD.FM.ELM. HD.FM.ELM. HD.FM.ELM. HD.FM.ELM. HD.FM.ELM. HD.FM.ELM. HD.FM.ELM. X / X 3/ X / X 3/ X / X 3/ X X / PP FEMALE TEE HD.FM.TEF. HD.FM.TEF. HD.FM.TEF. HD.FM.TEF. HD.FM.TEF. HD.FM.TEF. X / X 3/ X / X 3/ X 3/ X 7 PP MALE TEE HD.FM.TEM. HD.FM.TEM. HD.FM.TEM. HD.FM.TEM. HD.FM.TEM. HD.FM.TEM. X / X 3/ X / X 3/ X 3/ X 7 3
14 PP FEMALE NIPPLE HD.FM.NRF. HD.FM.NRF. HD.FM.NRF. HD.FM.NRF. HD.FM.NRF. HD.FM.NRF. HD.FM.NRF. X / X 3/ X / X 3/ X / X 3/ X PP HEXAGONAL FEMALE NIPPLE HD.FM.NHF. HD.FM.NHF. HD.FM.NHF. HD.FM.NHF.6363 HD.FM.NHF.77 HD.FM.NHF.9090 HD.FM.NHF. X X X 63 X 7 X 90 X 3 X PP MALE NIPPLE HD.FM.NRM. HD.FM.NRM. HD.FM.NRM. HD.FM.NRM. HD.FM.NRM. HD.FM.NRM. HD.FM.NRM. X / X 3/ X / X 3/ X / X 3/ X PP HEXAGONAL MALE NIPPLE HD.FM.NHM. HD.FM.NHM. HD.FM.NHM. HD.FM.NHM.6363 HD.FM.NHM.77 HD.FM.NHM.9090 HD.FM.NHM. X X X 63 X 7 X 90 X 3 X 6 3
15 PP TRANSITION UNION FEMALE HD.FM.UEF. HD.FM.UEF. HD.FM.UEF. HD.FM.UEF. HD.FM.UHF. HD.FM.UHF.6363 HD.FM.UHF.77 HD.FM.UHF.9090 HD.FM.UHF. X / X 3/ X X X 63 X 7 X 90 X 3 X PP TRANSITION UNION MALE HD.FM.UEM. HD.FM.UEM. HD.FM.UEM. HD.FM.UEM. HD.FM.UHM. HD.FM.UHM.6363 HD.FM.UHM.77 HD.FM.UHM.9090 HD.FM.UHM. X / X 3/ X X X 63 X 7 X / 90 X 3 X 6 3
16 PP WALLPLATE ELBOW FEMALE HD.FM.WEF. HD.FM.WEF. X / X / PP DOUBLE WALLPLATE ELBOW FEMALE HD.FM.WED. HD.FM.WED. X / X / PP FILTER FEMALE / FEMALE HD.FM.FFF.0 HD.FM.FFF.0 HD.FM.FFF.0 PP FILTER MALE / FEMALE HD.FM.FMF.0 HD.FM.FMF.0 HD.FM.FMF.0
17 PP BALL VALVE CHROME LOOK HD.FV.CBV.0 HD.FV.CBV.0 HD.FV.CBV.0 PP CHROME VALVE - LUXURY HD.FV.CLV.0 HD.FV.CLV.0 HD.FV.CLV.0 PP CHROME VALVE HIDDEN HD.FV.CHV.0 HD.FV.CHV.0 HD.FV.CHV.0 7
18 PP BALL VALVE FOR RADIATOR - ELBOW HD.FV.RVE.0 HD.FV.RVE.0 X / X 3/ PP BALL VALVE FOR RADIATOR - STRAIGHT HD.FV.RVS.0 HD.FV.RVS.0 X / X 3/ PP BALL VALVE HD.FV.BVP.0 HD.FV.BVP.0 HD.FV.BVP.0 HD.FV.BVP.0 HD.FV.BVP.0 HD.FV.BVP.063 HD.FV.BVP PP BALL VALVE (LONG) HD.FV.BVL.0 HD.FV.BVL.0 3
19 PP BALL VALVE WITH DOUBLE TRANSITION UNION HD.FV.BDU.0 HD.FV.BDU.0 HD.FV.BDU.0 PP BALL VALVE WITH SINGLE TRANSITION UNION HD.FV.BSU.0- HD.FV.BSU.0- HD.FV.BSU.0-3 PP SHUT OFF VALVE HD.FV.SHT.0 HD.FV.SHT.0 HD.FV.SHT.0 HD.FV.SHT.0 9
20 WELDING SET HD.TL.WM.63 - WELDING MACHINE HD.TL.WM WELDING TOOLS HD.TL.WT.0 HD.TL.WT.0 HD.TL.WT.0 HD.TL.WT.0 HD.TL.WT.0 HD.TL.WT.063 HD.TL.WT.07 HD.TL.WT.090 HD.TL.WT PIPE SCISSORS HD.TL.PS. - FOIL PEELER HD.TL.FP. HD.TL.FP. HD.TL.FP.63 HD.TL.FP
21 Points to take into consideration in the assembly and storage of PVC-U Pipes and Fittings During storage the height of the pipe links should not exceed. meters. When the pipes are folded, leave the muff parts outside in order not to have them contact with each other. PVC-U pipes should be protected from impacts, hits etc. because the fragility of the pipe increases when the temperature is approximately 0 C. PVC-U pipes should be protected from processes which can cause any notches, cuts or traces on them. The clamps should have round corners, a smooth and flat internal surface, and they should wrap the pipe completely. For vertically assembled PVC-U pipes, the pipes should be fixed together by clamps right after they are interlaced together to prevent shifting. During assembly, PVC-U pipes and fittings should be greased with liquid soap to interlace easily. PVC-U pipes and fittings should not be coupled without gaskets. PVC-U pipes to be laid under concrete should be tested with the below mentioned method before pouring the concrete. METHOD of Water Test: The pipe to be tested should be filled with water at a level of not less than minimum mm from the surface. The mechanism should be tested from the upper point. This upper point should not exceed meters from the minimum level. The pipe should keep the same water level for at least minutes without any leakage. Each joint should be controlled visually for leakages. If there is any defect, the test should be repeated after repair. Further technical information is available on our website. We strongly recommend you to check our website link below before usage: PVC
22 PVC - U TUBE X X 0 X 0 X0 X 00 X 00 X 00 7 X 7 X 0 7 X 0 7 X0 7 X 00 7 X 00 7 X 00 X X 0 X 0 X0 X 00 X 00 X 00 X X 0 X 0 X0 X 00 X 00 X 00 3
23 PVC - U TUBE B X 3. - B X B X B X B X B X B X BD 7 X 3. - BD 7 X BD 7 X BD 7 X BD 7 X BD 7 X BD 7 X BD X 3. - BD X BD X BD X BD X BD X BD X BD X 3. - BD X BD X BD X BD X BD X BD X B X 3. - B X B X B X B X B X B X B 0 X 3. - B 0 X B 0 X B 0 X B 0 X B 0 X B 0 X B 0 X 3. - B 0 X B 0 X B 0 X B 0 X B 0 X B 0 X
24 PVC - U ELBOW.EL.00.EL.07.EL..EL..EL.0.EL PVC - U ELBOW 7.EL.007.EL.077.EL.7.EL.7.EL.07.EL PVC-U SINGLE BRANCH.B.00.B.07.B.077.B..B.7.B..B..B..B..B..B..B.0.B.0.B.0.B.00 / 7 / 7 / 7 / / 7 / / / / / / 0 / 0 / 0 / 0 / 0 6
25 PVC-U SINGLE BRANCH 7.B.00.B.07.B.077.B..B.7.B..B..B..B..B.0.B.0.B.0.B.00 / 7 / 7 / 7 / / 7 / / / / 0 / 0 / 0 / 0 / PVC - U DOUBLE BRANCH.D.00.D.07.D.077.D..D.7 D. / 7 / 7 / 7 / / 7 / PVC - U DOUBLE BRANCH 7.D. / REDUCER.RD.07.RD..RD.7.RD..RD..RD..RD.0.RD.0 7 / / / 7 / / / 0 / 0 /
26 S PIECE.SS.07.SS..SS CLEANING PIECE.TC.0700.TC.0 7 SOCKET.SC.0000.SC.0700.SC.0.SC.0.SC.000.SC PLUG.US.0000.US.0700.US PIPE CLIPS
27
28 Atatürk Cad. Erzincan Cad. No: Ataşehir 37 İstanbul / Turkey Tel: Fax:
PVC PRESSURE SYSTEMS. Fittings / Pipes
D PVC PRESSURE SYSTEMS Fittings / Pipes PRESSURE FITTINGS BENDS 15mm x 45 801-15-45 15mm x 90 801-15-90 20mm x 45 801-20-45 20mm x 90 801-20-90 25mm x 45 801-25-45 25mm x 90 801-25-90 32mm x 45 801-32-45
More informationCombi-System. Composition pipe Copipe
Combi-System Composition pipe Copipe no. Composition pipe Copipe white rolls DN 10 x 2.0 mm length per roll 50 m 150 10 54 length per roll 100 m 150 01 54 length per roll 200 m 150 02 54 DN 12 16 x 2.0
More informationbar Round (303S31) Round (303S31) Bright Drawn H9 Dia (in) Weight/m (Kg) Weight/m (Kg) Dia (in) 20mm
A World of Metal bar mm mm mm mm mm 7mm mm 9mm 0mm 0.0 0.0 0.0 0.0 0. 0. 0.9 0. 0. 0.0 0. 0.9 0.0 0.0 0. 0. 0.7 mm mm mm mm mm 7mm mm 0mm mm mm mm 0.9 0.99.0...9.7..00..7.9.0...0 (0S) Bright Drawn H9
More informationprecision pipe fittings
Precision Pipe Fittings 1 8 to 1 sizes 316 stainless steel, brass, and exotic materials NPT threads HOKE Inc. PO Box 4866 Spartanburg, SC 29305-4866 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com
More informationCPVC Hot and Cold Water System
CPVC Hot and Cold Water System CANADA CPVC-C0313 MARCH 2013 SUPERSEDES CPVC-C1112R NOV. 2012 TABLE OF CONTENTS CPVC PIPE PAGE CATEGORY FlowGuard Gold CPVC Copper Tube Size Pipe 3 C-23 FITTINGS FlowGuard
More informationPureFlow PEX Crimp Fittings Most widely recognized fitting system in North America
PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only
More informationDESIGN & ENGINEERING DATA
DESIGN & ENGINEERING DATA Flow Friction loss through PVC pipe is normally obtained by using the Hazen-Williams equation shown below for water: f = 83 x ( 0 ) 2 x Q 2 Where: C di 4.8655 f = friction head
More information7500-S Greensand Filter Installation Guide
Clean Water Made Easy www.cleanwaterstore.com 7500-S Greensand Filter Installation Guide Thank you for purchasing a Clean Water System! With proper installation and a little routine maintenance your system
More informationJOHN GUEST SPEEDFIT FITTINGS
G6300 JOHN GUEST SPEEDFIT FITTINGS Grey acetyl copolymer construction with nitrile o-rings. FDA approved materials on all wetted surfaces. Meet NSF International Standards 51 and 61. Part Cross Pipe PRICE
More informationstandard stock range Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability
Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability Stainless Steel, Aluminium, Copper and Brass Stockholder Sales tel: + (0) 2 2 200 fax: + (0)
More informationPVC SOLVENT WELD DRAIN WASTE & VENT
PVC-17R PAGE 1 november 007 COUPLING (Hub x Hub) 0 110 11 11 11 1171 1 1/ 0 7 00 00 0 10.9.79 1.0.. 1. REDUCER BUSHING (Spigot x Hub) Style 17 x TRAP ADAPTER (Spigot x Slip Joint ) 1 19.71 REDUCER COUPLING
More informationWITH ROLLED STOP COUPLING REDUCER C X C C
Copperfit Industries Inc. 1280 E. 9th St. Pomona, CA 91766 Tel: (909) 622-6100 (866) 200-1888 Fax: (909) 622-5566 WWW.COPPERFIT.COM COPPER PRESSURE FITTINGS Effective Date: Jan 2018 Version: 2C201801 Spread
More informationTimken Lubrication Delivery Systems. Friction management solutions SM to keep systems running smoothly
Timken Lubrication Delivery Systems Friction management solutions SM to keep systems running smoothly G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication
More informationMICROJET IRRIGATION SYSTEMS
CATALOGUE 01 September 2014 MICROJET IRRIGATION SYSTEMS P.O. Box 279, Eppindust, 7475, South Africa Tel : +27 (0)21 535 1310 Fax : +27 (0)21 535 1166 email : info@microjet.co.za http://www.microjet.com
More informationPotable and Hydronic Pex System CANADA PEX-C0315R MARCH 2015 SUPERSEDES PEX-C0214
Potable and Hydronic Pex System CANADA PEX-C0315R MARCH 2015 SUPERSEDES PEX-C0214 TABLE OF CONTENTS PEX PIPE page category SUPERPEX ultra resistant potable water pipe 3 C-54 OXYPEX oxygen barrier radiant
More informationØ mm. SYSTEM KAN-therm. Steel. Traditional material in modern technology TECHNOLOGY OF SUCCESS ISO 9001
Ø 12-108 mm SYSTEM KAN-therm Steel Traditional material in modern technology TECHNOLOGY OF SUCCESS System KAN-therm Steel - assortment press carbon steel pipe, zinc coated - bar 6 m 12 1,2 * 620459.4 6/624
More informationMICROJET IRRIGATION SYSTEMS
CATALOGUE 01 August 2010 MICROJET IRRIGATION SYSTEMS P.O. Box 279, Eppindust, 7475, South Africa Tel : +27 (0)21 535 1310 Fax : +27 (0)21 535 1166 email : queries@microjet.co.za http://www.microjet.com
More informationTEMPERIX S Clamp. FAFNIR GmbH Schnackenburgallee 149 c Hamburg Germany
Process Automation Edition 2016.09 Technical Changes Reserved 1 TEMPERIX S Clamp 1 General Information These operating instructions contain information necessary for the proper installation and use of
More informationViega PEX Manifold Plumbing Systems
Viega PureFlow ViegaPEX Tubing Viega PEX Manifold Plumbing Systems MANABLOC Mounting Straps Pair of mounting straps with screws Pre-drilled to mount on 16" center studs ViegaPEX tubing is rated at 100
More informationPVC HI-STRENGTH SCHEDULE 80 PIPE - PLAIN ENDS
29 PRICE LIST 1 May 2018 Hi-Strength Industrial Piping System Plastic Systems PVC Schedule 80 Piping system is truly an industrial product. Often referred to as Hi Strength PVC, its industrial grade wall
More information1COMPRESSION FITTINGS
SECTION 1COMPRESSION FITTINGS TECHNICAL INFORMATION Wade Couplings consistently produce cost effective, reliable leak-tight joints. All Wade couplings are specially designed for use with Wade nuts and
More information3D Galaxy II GH-WIU02. English User s Manual
3D Galaxy II GH-WIU02 English User s Manual 3D Galaxy II Liquid Cooling System Caution 1. Before pouring liquid coolant into the tank to test the liquid cooling system, please reconfirm all the tubes have
More informationStainless Steel Parts & Accessories Catalog NOVEMBER 2017
Stainless Steel Parts & Accessories Catalog NOVEMBER 2017 www.airnet-system.com TABLE OF CONTENTS PIPING PIPE 304L... 3 PIPE 316L... 3 FITTINGS QUICK DROP... 4 SWAN NECK... 4 ELBOW 45... 4 ELBOW 90...5
More informationSharkBite 25 W ARRANTY Sh YEAR arkbite
25 SharkBite WARRANTY YEAR SharkBite The SharkBite Plumbing System SharkBite has established a reputation as one of Australia s best plumbing systems. Quick & easy to use. Fittings for PEX and Copper Pipe
More informationFor more information on where your nearest stockist is or for a complete demonstration by one of our team, please call us today
Polybutene Plumbing & Heating Price list APRIL 2014 0800 043 8883 The Buteline Plumbing System is an integrated flexible plumbing system incorporating Polybutene pipes, fittings and tools which range in
More informationpneumatic push-in fittings system LF 3000
pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
More informationEXCELPrime SINGLE WALL STOVE PIPE
SINGLE WALL STOVE PIPE 28 Technical Information Technical Information Certification has been tested and listed by Intertek Testing Services Applications is designed to be used as a connector between a
More informationParametric Piping Models. Naveed Anwar July 2003
Parametric Piping Models Naveed Anwar July 2003 The Idea Basic idea is to assign parametric objects to basic line or area objects in the SAP2000 model and then generate detailed mesh for each object, on-demand
More informationCatalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group
Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability
More informationSurface Area and Volume
Name: Chapter Date: Surface Area and Volume Practice 1 Building Solids Using Unit Cubes Find the number of unit cubes used to build each solid. Some of the cubes may be hidden. 1. 2. unit cubes 3. 4. unit
More informationWe provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity.
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. ENGINEERED FOR SUPERIOR PERFORMANCE Compressed Air & Gas Systems
More informationPNP415/417 POP 'N PLUG WITH CUSTOM TABLETOP SURFACE USER'S GUIDE
PNP415 PNP417 with tabletop cutout installed. MANUAL PART NUMBER: 400-0427-002 PNP415/417 POP 'N PLUG WITH CUSTOM TABLETOP SURFACE USER'S GUIDE TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS... 2
More informationCompression fittings Metric and inch
Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.
More informationComposite Push-In Fittings - NPTF/INCH
composite FITTINGS Composite Push-In Fittings - F/INCH Tube diameter: Ø /8", 5/32", /4", 5/6", 3/8", /2" Connections /8, /4, 3/8, /2 F These new models have been released in technopolymer, maintaining
More information6.5 Cu. Ft. S-Series Blast Pot Part Numbers & Schematics Guide
Always Innovative. Always Reliable. 6.5 Cu. Ft. S-Series Blast Pot Part Numbers & Schematics Guide Metering Valve Remote Configurations Standard Features Upgrade Options Moisture Separator Bantam Part
More informationINSTALLATION INSTRUCTIONS
Wired Remote Controller 7 Day Programmable Ductless Systems KSACN0401AAA (High Wall Models) KSACN0501AAA (Ducted/Cassette Models) INSTALLATION INSTRUCTIONS NOTE: Read the entire instruction manual before
More informationPRK. Plastic pipe couplings Suitable for PEL, PEH and PEM pipes
PRK Plastic pipe couplings Suitable for PEL, PEH and PEM pipes IMI TA / Couplings / PRK PRK This plastic pipe coupling is suitable for PEL, PEH and PEM pipes and can be used both above and underground.
More informationRD 100. Spare parts list. RD 100 s/n BES Construction Tools PC AB No
RD 100 Spare parts list RD 100 s/n BES100496 2018 Construction Tools PC AB No. 9800153901 2018-10 General information This spare parts list applies to the following: Part number 8311030410 RD 100 Description
More informationCITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES
CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES All bidders MUST submit product specifications, literature describing items, manufacturers name, product code and part numbers with
More informationCab Box Kit Dome Plug Cab Box Cab Box Lid
DirectCommand Installation Ag Leader Technology Note: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Direct Command Kit 4100578 1 Cable Installation
More informationPart Name/Description Part Number Quantity
Part Name/Description Part Number Quantity Direct Command Kit 4100883 1 Installation Instructions 2006336 1 Hardware Kit Large Module 2001354-1 2 Cable Installation Kit 2000901-1 1 Quick Reference Card
More informationSCHEDULE 80 UP VC INDUSTRIAL PIPE SYSTEMS VIADUX VERSION 2.0
SCHEDULE 80 UP VC INDUSTRIAL PIPE SYSTEMS VIADUX VERSION 2.0 SCHEDULE 80 UPVC SCHEDULE 80 UPVC INDUSTRIAL PIPE SYSTEMS INDUSTRIAL PIPE SYSTEMS CORROSION RESISTANT PRESSURE PIPE RESISTANT TO MOST ACIDS,
More informationItem 620A Multi-Way Sanitary Ball Valve
R Item 0A Multi-Way Sanitary Ball Valve 00 WOG/ PN : /"-" SPECIFICATION * Body & end caps quality investment casting * Regulation (EC) No. / 00; (EU) 0/0 * Available in stainless steel or carbon steel
More informationSCHEDULE 80 PVC. List Prices
SCHEDULE 80 PVC List Prices Effective: May 28, 2001 Revised June 2003 Why LASCO Recommends Sealant in Threaded Joints Teflon tape, when compressed between male and female threads in PVC fittings joints,
More informationMIRROR POLISHED POSTS See page 46
PRE-ASSEMBLED POSTS We now offer the largest range of pre-assembled posts from stock. Straight out of the box and ready to bolt down or side fix. See the following pages to find the most suitable design.
More informationSTEEL PIPE NIPPLES G1616 STANDARD BLACK STEEL NIPPLES ITEMS HIGHLIGHTED
STEEL PIPE NIPPLES Pipe PRICE Part No. Size Length EACH G1616 STANDARD BLACK STEEL NIPPLES G1616-0XC 1 8" Close $ 2.00 G1616-0X1.5 1 8" 1 1 2" 2.20 G1616-0X2 1 8" 2" 2.30 G1616-0X2.5 1 8" 2 1 2" 2.50 G1616-0X3
More informationThird Party Tested. Sam Roberts & Associates, Inc.
Perfect Fit Solvent Weld DWV Fittings Injection Molded in Sizes 4 12 Fabricated in Sizes 10 24 D Applications The most complex installations require the most advanced fittings. Injection molded Perfect
More informationSEPTEMBER Voted Top Product of 2010 by readers of PHPI Magazine
Polybutene Plumbing & Heating Price list SEPTEMBER 2011 Voted Top Product of 2010 by readers of PHPI Magazine 0800 043 8883 The Buteline Plumbing System is an integrated flexible plumbing system incorporating
More informationPipe & Accessories SCHEDULE 80 PIPE & FITTINGS. 174 If You Don t See it, Just Ask! Who says Pipe Men Can t Jump? Schedule 80 PVC Nipples
SCHEDULE 80 PIPE & FITTINGS Schedule 80 PVC Nipples 125870 w" x Close 125873 w" x 1 w" 125875 w" x 2" 125880 w" x 3" 125885 w" x 4" 125887 w" x 5" 125890 w" x 6" 125895 w" x 8" 125900 w" x 10" 125905 w"
More informationThanks for shopping with Improvements! Lighted Canterbury Christmas Greenery Doorway Arch Item #548443
Thanks for shopping with Improvements! Lighted Canterbury Christmas Greenery Doorway Arch Item #548443 IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. PARTS LIST: 2 Metal Plate Stands 5 Greenery
More informationRadiator Lockshield Valves ADN.. AEN..
07 EN - Straight version ADN.. Angle version AEN.. ACVATIX TM Radiator Lockshield Valves ADN.. AEN.. for -pipe heating systems Valve bodies made of brass, mat nickel-plated DN 0, DN and DN 0 Integrated
More informationGEM TOOL ORDER FORM SAUGERTIES, NY 12477
ALUMINUM PIPING UNION 20 MM 19.7 D1 ALR TU20L6 $ 52.54 20 MM 4A ALR UN 20 $ 9.77 25 MM 19.7 D2 ALR TU25L6 $ 63.38 25 MM 4B ALR UN 25 $ 12.17 32 MM 19.7 D3 ALR TU32L6 $ 97.50 32 MM 4C ALR UN 32 $ 17.24
More informationEconomizer Regulator Filter Upgrade
Overview Chart LNG has released a new and improved economizer regulator, and filtering system. The new economizer filter system is designed to enhance reliability, and offer lower operating costs. In 2012
More informationCLASS 150. Investment Cast Stainless Steel Threaded End Fittings
Investment Cast Stainless Steel Threaded End Fittings Covering sizes from /8 to, DIE ERSTE manufactures and supplies the highest quality investment cast stainless steel threaded end fittings. In this series,
More informationMULTI-LAYER COMPOSITE (MLC) PIPING SYSTEMS INSTALLATION GUIDE
MULTI-LAYER COMPOSITE (MLC) PIPING SYSTEMS INSTALLATION GUIDE Multi-layer Composite (MLC) Piping Systems Installation Guide is published by Uponor, Inc. 5925 148th Street West Apple Valley, MN 55124 USA
More informationSCHEDULE 80 CPVC. List Prices
SCHEDULE 80 CPVC List Prices Effective: September 26, 2010 Why LASCO Recommends Sealant in Threaded Joints Teflon tape, when compressed between male and female threads in CPVC fittings joints, can cause
More informationCOPPER NICKEL FORGED AND MACHINED FITTINGS
adaptors in copper nickel butt welding ends x female thread ØD1 x ØE mm ØE L A.A/f weight (NPT) mm mm Kg/piece 0.38 x 0.5 16 x 20 1/2" 34 27 0.07 0.5 x 0.75 20 x 25 3/4" 37 32 0.1 0.75 x 0.75 25 x 25 3/4"
More informationDome Camera. Hardware Manual Z81, Z /01/08
Dome Camera Hardware Manual Z81, Z82 2018/01/08 Table of Contents Precautions 3 Regulatory Compliance... 4 Safety and Compliance Information... 5 Introduction 7 List of Models... 7 Package Contents...
More informationPrice Book - Section F Pipe & Accessories
Effective Date March, 20 Price Book - SCI Coop-Let F.T. Part No. Size / Description List Price 2500 SCI Coop-Let F.T. /2" x "- /2 $8.20 2520 SCI Coop-Let F.T. /2" x 2"-2 /2 $8.20 250 SCI Coop-Let F.T.
More informationPVC SOLVENT WELD SEWER & DRAIN FITTINGS
LIST U41-0418-IP PVC SOLVENT WELD SEWER & DRAIN FITTINGS APRIL 9, 2018 SUPERSEDES U41-1017-IP (OCTOBER 30, 2017) www.ipexna.com For products requiring bar coding, - 1 - www.ipexna.com LIST U41-0418-IP
More informationUser Manual. Revision B
User Manual TM Revision B Copyright 2014 Electronic Theatre Controls, Inc. All Rights reserved. Product information and specifications subject to change. Part Number: 7063M1220 Rev B Released: 2014-07
More informationTimken Lubricant Delivery Systems. Friction management solutions to keep systems running smoothly
Timken Lubricant Delivery Systems Friction management solutions to keep systems running smoothly SM G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication is
More informationPart Name/Description Part Number Quantity
Part Name/Description Part Number Quantity Direct Command 4200159 1 Cable Installation Kit 2000901-1 1 Hood 37-pin DSub 2001808-37 2 Dielectric Grease 2002872 1 Dust Plug 12 Pin Gray 2002899-12N 1 Feature
More informationPEX Press EN_US_2014_V2.indb 79 2/7/ :15:37 AM
79 For both residential and commercial applications, Viega PEX Press is the trusted way to join PEX tubing. As the world leader in press technology, Viega was the first to offer a press system to the PEX
More informationViega Pexcel Water System
Viega Pexcel Water System PAGE 57-1 ViegaPEX Ultra ViegaPEX Ultra is manufactured to ASTM F876/F877 standards and listed to ANSI/ NSF Standards 14 and 61. It is chlorine resistance rated for both traditional
More informationone sleek, beautifully finished unit, water bearing flat front plate,
PANEL RADIATORS Vasco panel radiators are not simply radiators covered with a plate. Radiator and sheet metal together, form one sleek, beautifully finished unit, hidden within which lies a unique heating
More informationHGR-2488 Prism Installation Instructions
HGR-2488 Prism Installation Instructions These installation instructions are applicable to the following models: TASCAM 2488 MK1 (original model) TASCAM 2488 MK II TASCAM 2488 NEO Page 1 of 8 Important
More informationwd-2
wd-2 wd-2 wd-4 wd-5 wd-6 wd-7 wd-8 wd-9 wd-10 wd-11 wd-12 wd-13 Minimum/Maximum Operating Pressures Minimum/Maximum Operating Temperatures AC Adapter: Supply Voltage Supply Frequency Output Voltage Output
More informationInsuLogix T Fiber Optic Probes and Extensions Installation Guide
InsuLogix T Fiber Optic Probes and Extensions Installation Guide Weidmann Technologies Deutschland GmbH Washingtonstraße 16/16a D-01139 Dresden, Germany Telefon: +49 (0)351 8435990 Version 1.2 InsuLogix
More informationEK-FC Ti Classic GPU WATER BLOCK INSTALLATION MANUAL
EK-FC2080 + Ti Classic GPU WATER BLOCK INSTALLATION MANUAL This product is compatible with RTX 2080 and RTX 2080 Ti graphic card. It is intended for installation only by expert users. Please consult with
More informationInch-size One-touch Fittings. Applicable Tubing: Inch Size Connection Thread: UNF, NPT. How to Order. Applicable tubing O.D.
Inch- One-touch Fittings Series KQ Tubing: Inch Size Thread:, KQ 0 ow to Order S Symbol Nil ccessory Symbol KQN KQC KQ (KQ) roduct s color Body White Black One-touch s Release button Orange Red Name Nipple
More informationAg Leader Technology. DirectCommand Installation Miller Nitro 5000 & 6000 ISO Kit
Note: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Direct Command Miller N5/5000 Series Kit 4200179 1 Installation Instructions 2006382
More informationTechnical Data. Care and Maintenance
Worldwide Contacts www.tyco-fire.com GRINNELL G-FIRE Grooved Fittings, Ductile Iron General Description GRINNELL G-FIRE Grooved Fittings provide an economical and efficient method of changing direction,
More informationtechnical catalogue
technical catalogue www.abka.net Grills and Drainage Channels User Area Stadium drainage practice Green area and garden drainage practice Garage drainage practice Swimming pool drainage practice Kasimpasa
More informationRL-H80 PARTS LIST # K
RL-H80 PARTS LIST # 102837K USE THIS PARTS LIST FOR: Hoist Serial Number: 2733 to For older hoists use the following: Parts List No. 102837G for Serial Number 2485 to 2732 IF YOUR HOIST DOES NOT FALL WITHIN
More informationDishmachine Division Please call for pricing or
Dishmachine Division Please call for pricing -00-- or -00-5- ELECTRICAL BOX Page 0 and PLUMBING Page WRAPPER Page - PAN Page -5 STAND Page and KLE--HL Convertible Dishwashing Machine Part No. 05 5 5 0
More informationPoly-Tite Fittings. Order By part number and name.
oly-tite ittings Advantages A compact brass compression fitting designed to speed any installation. Body, nut and sleeve are furnished pre-assembled, ready for installation. An exclusive acetal copolymer
More informationCURRICULUM FOR SIX MONTH CERTIFICATE COURSE FITTING & PLUMBING UNDER DEVELOPMENT. Prepared By CURRICULUM DEVELOPMENT CELL
CURRICULUM FOR SIX MONTH CERTIFICATE COURSE IN FITTING & PLUMBING UNDER DEVELOPMENT Prepared By CURRICULUM DEVELOPMENT CELL INSTITUTE OF RESEARCH, DEVELOPMENT, TRAINING,U.P., KANPUR-208002 SIX MONTH CERTIFICATE
More informationS E R V I C E N O T E
IINFORMATIION ONLY DOES NOT COMMUNIICATE A MODIIFIICATIION OR SAFETY CONDIITIION S E R V I C E N O T E Supersedes: NONE Agilent E4419B EPM Average Power Meter Serial Numbers: GB00000000/GB99999999 MY00000000/MY99999999
More informationProduct catalogue. Aztec International S.A., ul. Bułgarska 63/65, Poznań, Poland, phone ,
Product catalogue Delivery Programme 2014 Status 02/2014 - Subject to change - Index Rail system... 4 Accessories mounting rails... 11 Rail connectors... 11 Cross connectors... 12 Module clamps... 13 Module
More informationUNITED STATES MEXICO CANADA
www.legris.com Online catalog with technical information and training module to help you implement the right solution. Find technical data on your fitting and download a CAD in many different formats.
More information9 Maintenance and Repair
Agilent 1200 Infinity II Series RID User Manual 9 Maintenance and Repair Introduction to Maintenance 120 Warnings and Cautions 121 Overview of Maintenance 123 Cleaning the Module 124 Storage of the Detector
More informationDial Thermometer. Particularities. Brief description. Technical data. Page 1/6. Data Sheet
Dial Thermometer Data Sheet 608202 Page 1/6 - discontinued - Particularities Temperature indicator for panel mounting Class 2 IP53 front protection Housing sizes: 52 mm and 60 mm dia. Bezel: 48x48 mm,
More informationMounting System HMS. To the optimized positioning of sensors Simple and stable fixing in the construction process
S E N S O R E N F Ü R A U T O M AT I O N Mounting System HMS To the optimized positioning of sensors Simple and stable fixing in the construction process Montagesystem HMS SENSOREN FÜR AUTOMATION Base
More informationimac Intel 27" EMC 2639 Hard Drive
imac Intel 27" EMC 2639 Hard Drive Replacement Replace the Hard Drive in your imac Intel 27" EMC 2639. Written By: Walter Galan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 26 INTRODUCTION Replacing the
More informationOFFICIAL WARWICK AMP OWNER MANUAL ENGLISH
OFFICIAL WARWICK AMP OWNER MANUAL ENGLISH Congratulations on the purchase of the new Warwick amplifier head/combo. Please read these instructions through before connecting and operating the device. If
More informationHD22 and HD30 Service Parts
HD and HD0 Service Parts This is the list of service parts and wiring diagrams for all versions of these two hotel dispensers. Pay close attention to the voltage and/or cycles to be sure of ordering the
More informationTechnical Data. Care and Maintenance
Worldwide Contacts www.tyco-fire.com GRINNELL G-FIRE Grooved Fittings, Ductile Iron General Description GRINNELL G-FIRE Grooved Fittings provide an economical and efficient method of changing direction,
More informationAg Leader Technology. DirectCommand Installation Hardi 20-pin Interface Kit (Sprayer Chassis Mount)
Part Name / Description Part Number Quantity DirectCommand Hardi Sprayer Kit 4100882 1 Dust Receptacle 8-pin 2002975-8C 1 Installation Instructions 2006335 1 Quick Reference Card- Liquid Application 2002831-38
More informationORDERS MUST BE PLACED BY ING
MIDLAND METAL MFG Fittings, Valves, Clamps & Accessories for Hose, Pipe and Tube ORDERS MUST BE PLACED BY EMAILING SPECIALS@MIDLANDMETAL.COM PVC DWV FITTINGS 2 WEEK LEAD TIME Use your Midland Metal multiplier
More informationOutdoor PTZ. Mounting on the Ceiling Using Pendant Mount. Installation Guide. For Models: I93, I94, I95, I96, KCM /12/03
Outdoor PTZ Mounting on the Ceiling Using Pendant Mount For Models: I93, I94, I95, I96, KCM-8211 2013/12/03 Table of Contents Mounting Solutions... 3 Straight Tube Installation Procedures... 4 Step 1:
More informationLockshield valves Series 195UM - 196UM 1195UM UM
Lockshield valves Series 9UM - 96UM 9UM - 96UM Main features - vailable in the following versions : ngle body, straight body, for iron, copper and polyethylene piping with / connection to radiator and
More informationHARMONi G3. Quick Start Guide for HARMONi G3. imac Processor/FireWire Upgrade
HARMONi G3 imac Processor/FireWire Upgrade imac and Operating System Compatibility The HARMONi G3 imac processor/firewire upgrade is compatible only with imac 233, 266, and 333 MHz models (Revisions A-D);
More informationBlower Purge Air Dryers
Blower Purge Air Dryers PB-250 to PB-750 Parts List November 2013 2 Table of contents 1 PB - 250... 4 2 PB - 325... 6 3 PB - 400... 8 4 PB - 500... 10 5 PB - 650... 12 6 PB - 750... 14 7 Control Panel...
More informationCopper Fittings: Wrot Pressure
Phone: (877) 515-4522 Dated: Jan. 23, 2017 Fax: (877) 595-4522 Copper Fittings: Wrot Pressure Male Adapter C X M Female Adapter C X F HL15-101-0001 1/8 1/4 x 1/8 21.04 25 3000 HL15-105-0001 1/8 1/4 x 1/8
More informationMASTERLINE Ultimate Hybrid High Voltage 4/12 (MLUH HV 4/12) blunt cut at BTS side
INSTALLATION MANUAL HUBER+SUHNER AG Fiber Optics MASTERLINE Ultimate Hybrid High Voltage 4/12 (MLU HV 4/12) blunt cut at BTS side DOC-0000803885 Rev A June 18, 2018 Page 1 of 12 (MLUH HV 4/12) blunt cut
More informationCopper Fittings: Wrot Pressure
Phone: (877) 515-4522 Dated: Feb. 9, 2015 Fax: (877) 595-4522 Copper Fittings: Wrot Pressure Male Adapter C X M Female Adapter C X F HL15-101-0001 1/8 1/4 x 1/8 19.36 25 3000 HL15-105-0001 1/8 1/4 x 1/8
More informationBGA IRDA-WELDER User Manual. Model: T870A
BGA IRDA-WELDER Model: T870A 0 CATALOGUE Features....2 Technical Parameter and Components..3 T-870A illustrated explaining...4 (1)The whole machine 4 (2)Front panel.. 5 (3)Rear panel.. 5 (4)Focus holder
More informationCall us on
RAINWATER & PLUMBING 02 Rainwater & Plumbing Half Round 112mm, Rainwater System White, Black, Brown, Grey ½ Rd Gutter 4m R10002 112/68mm 11.95 ½ Rd Fascia R10007 1.00 ½ Rd - C/Iron Ogee Adapter L/H R10983
More informationUSA Whole Price List
USA Whole Price List Tips & Tricks How to Use the BMI Parts Catalog 1. Using the Table of Contents This reference page not only provides a listing of price lists and page numbers, it also links to each
More information