Separating, centrifuging 606 Microcentrifuges Benchtop centrifuges Centrifuge tubes Separating funnels 636

Transcription

1 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Contents Distillation Connectors, Stillheads + Condensers 7 + Jointed glassware 6 + Round bottom flasks and accessories 70 + Distillation-Accessories 7 + Glass components 77 + Rotary evaporators 9 Separating, centrifuging 606 Microcentrifuges Benchtop centrifuges 68 + Centrifuge tubes 67 + Separating funnels 66 Filtration 69 Filter paper, qualitative 69 + Filter paper, quantitative 68 + Glass-fibre filters 6 + Membrane filters 66 + Syringe filters 66 + Filtration apparatus 678

2 Lenz Laborglas GmbH & Co. KG Am Ried Wertheim Germany Telefon +9 (0) Fax +9 (0) info@lenz-laborglas.de Lenz The Specialist for Ground Joints The Lenz range of laboratory glassware Ground joints Stopcocks Flasks Separating/dropping funnels, chromatography Components and condensers Extractors General laboratory accessories Water stills Reaction vessels and accessories

3 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Distillation/Connectors, Stillheads Distillation adapters (plain bends), ground glass joint Made of DURAN tubing. With socket and outlet tube angled at 0, diameter. Lenz Length* Socket NS 6 00 * Outlet tube length () Receiver adapters Made of DURAN tubing. With vent/vacuum connection. Straight or angled (0 ),with nozzle. Lenz Socket Cone Form NS / / NS / / straight angled straight angled Splash head adapter, ground glass joint Borosilicate glass. which is resistant to heat and almost all chemicals. Suitable to be used in distillation assemblies to prevent raw liquid step over from flask to condenser. Isolab Socket Cone Description NS / NS / straight straight We can supply this manufactorer s whole product range!

4 6. Distillation, Separation, Filtration Distillation/Connectors, Stillheads GENERAL CATALOGUE EDITION 7 Splash head adapter, ground glass joint Made of DURAN tubing. Two versions available: - straight, with cone and socket - bent with two cones at 7. Splash heads are directly placed onto distillation flasks for separation of drops. Lenz Socket Cone Description NS NS straight bent Stillheads, plain, ground cone joints Made of DURAN tubing. DIN 9. Medium neck. Inlet (flask) cone with thermometer socket and 7 angled outlet (condenser) cone. Lenz Socket Cone NS NS / Adapters, ground glass joint, multiple, neck Made of DURAN tubing. Side neck parallel with centre neck. x sockets x cone. Lenz Socket Cone NS / NS / Stillheads, ground glass joint, Claisen type, sloping Made of DURAN tubing. DIN 9. Claisen type, sloping. Stillhead with central and parallel side necks and vapour outlet cone at 7. x sockets NS /, x cones, for distillation thermometers of built-in length. Lenz Socket Cone NS NS /

5 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Distillation/Connectors, Stillheads-Condensers Distilling Links Made of DURAN tubing. Distilling links without condenser, with two vertical cones. With, or without NS/ socket for distillation thermometers, iersion. Lenz Socket Cone Length NS NS - / Stillheads, ground glass joint, with integral liebig condenser Made of DURAN tubing. DIN 96. With Liebig condenser at 7 and vertical outlet with vacuum connection. Socket Cone Effective length NS NS / / 00 Lenz Distillation assemblies Made of DURAN tubing. Claisen-type. To DIN 96. With Liebig condenser, angled 7 and vertical outlet with vacuum adapter. Lenz Socket Cone Effective length NS NS / / 60 / Distillation assemblies Claisen-type Made of DURAN tubing. DIN 96. With Liebig condenser and NS cone outlet. Lenz Socket Cone Effective length NS NS / / / Delivery Adapters, Angled Made of Duran tubing. Lenz 6 NS /9 / Condensers, ground glass joint, Dimroth Borosilicate glass. which is resistant to heat and almost all chemicals and they meet Isolab the highest quality standards according to DIN 9. Supplied with polypropylene side arm, which has a screw thread connector for easy and safe fitting of the tubing. The side arms accept tubings with 8/9 bore. 7 Description NS Effective length with PP side arm 00 with PP side arm

6 6. Distillation, Separation, Filtration Distillation/Condensers GENERAL CATALOGUE EDITION 7 Condensers, ground glass joint, Dimroth, for soxhlet Borosilicate glass. which is resistant to heat and almost all chemicals. They meet the Isolab highest quality standards. Supplied with polypropylene side arm. Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing. The side arms accept tubings with 8/9 bore. NS Effective length / Condensers, ground glass joint, Dimroth DURAN tubing. DIN 9. Socket and cone NS. Water connection by nozzles or GL threads with two threaded plastic nozzles. Lenz Socket Cone Effective length NS NS / / Condensers, ground glass joint, Dimroth DURAN tubing. For extractors and for condensing vapours. With cone. Water connection with thread GL, with two threaded plastic nozzles. Lenz Cone Capacity NS /0 60/6 7/ ml Condensers, ground glass joint, Liebig Borosilicate glass. which is resistant to heat and almost all chemicals. They meet the highest quality standards according to DIN 76. Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing. The side arms accept tubings with 8/9 bore. Isolab Description NS Effective length with PP side arm 00 with PP side arm 00 with glass side arm 00 with glass side arm Condensers, ground glass joint, Liebig DURAN tubing. DIN 76 with nozzle or GL thread. Water connection, tubing nozzle or GL thread, with two threaded, plastic, tubing nozzles. Lenz Socket Cone Ext. diam. Int. dia. Effective length NS NS / / /6 9/

7 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Distillation/Condensers Condensers, ground glass joint, Allihn Borosilicate glass. which is resistant to heat and almost all chemicals. They meet the highest quality standards according to DIN 8. Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing. The side arms accept tubings with 8/9 bore. Isolab Description NS Effective length with PP side arm 60 with PP side arm 00 with PP side arm Condensers, ground glass joint, Allihn DURAN tubing. DIN 8. For condensing vapours. With cone and socket, GL threaded water connections with two threaded, plastic, tubing nozzles. Lenz Socket Cone Bulbs Ext. diam. Effective length NS NS / 9/6 / 9/ Condensers, ground glass joint, Allihn Duran tubing DIN 8. For condensing vapours. With cone, water connection with nozzle or GL thread and two threaded plastic tubing nozzles. Lenz Cone Bulbs Ext. diam. Effective length Connection NS /0 / nozzle nozzle thread GL thread GL

8 6. Distillation, Separation, Filtration Distillation/Condensers GENERAL CATALOGUE EDITION 7 Spiral condensers Borosilicate glass. which is resistant to heat and almost all chemicals. They meet the Isolab highest quality standards according to DIN 9. Supplied with either glass side arm or polypropylene side arm. Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing. The side arms accept tubings with 8/9 bore. Description NS Effective length with glass side arm 60 with glass side arm 00 with glass side arm 00 with PP side arm 60 with PP side arm 00 with PP side arm Spiral condensers DURAN tubing. For cooled distillate. Water connections, complete with two GL threaded plastic nozzles. External diameter: 0 Lenz Socket Cone Effective length NS NS / / Intensive condensers, jacketed coil, ground glass joint DURAN tubing. DIN 9. With jacketed cooling coil. Water connection with nozzle or GL thread, with two threaded, plastic, tubing nozzles. Lenz Socket Cone Effective length NS NS Air condensers, ground glass joint DURAN tubing. For easily condensable vapours. Lenz Cone Length NS /

9 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Distillation/Condensers-Jointed glassware Columns, ground glass joint, Vigreux DURAN tubing. Vigreux type. Cone and socket NS. Lenz Points 6 6 Effective length Length Description 7 with sleeve without sleeve without sleeve Columns, ground glass joint, Hempel DURAN tubing. With packing material support, ground glass cone and socket Lenz Socket Cone Fill height Tube dia. NS NS / / Flat ground flange reaction vessels, jacketed Flange with groove in accordance with DIN. Flask with thermostatic jacket and type "T" 0 bore PTFE drain valve. Form A = cylindrical form B = short form Capacity DN Form Widest A.-Ø Flange dia. Height Fill height ml 00 A A A A A A A A A A A B A B B B A A B B B Further accessories and spare parts available on request

10 6. Distillation, Separation, Filtration Distillation/Jointed glassware GENERAL CATALOGUE EDITION 7 Flat flange lids Flange in accordance with DIN. Flange dia. Central socket Angled side necks Parallel side necks Height NS NS NS x 9 - x 9 x 9 x 9 x 9 x 9 x 9 - x 9 x 9 x 9 - x 9 x 9 x 9 - x 9 x 9 x 9 - x 9 x 9 x 9 - x 9 x 9 x 9 - x 9 x 9 - x 9 x x 9 - x x 9 - x 9 x x 9 - x 9 x x 9 - x 9 x x 9 - x 9 x x 9 - x 9 x x 9 - x 9 x x Reaction vessel accessories PTFE drain valves, complete: Model "T" (Standard for vessels with NW 00 to NW 00 flanges): PTFE, 0 bore drain valve with no dead volume, key plug that seals on the base of the vessel, with maximum opening, self-adjusting, centring hub, visible wear indication and integral glass angled outlet. For standard applications with liquids of different viscosity. Model "H" generally as Model "T", but with 0 bore and max. opening 70. Model "H/PT 00" generally as Model "H", but with integral Pt00 sensor to enable easy measurement of sump temperature. Type Model "T" Model "H" Model "H/Pt 00" Further accessories and spare parts available on request Reaction flasks, flat flange DURAN Flanged neck with groove for vacuum use. 0ml and 000ml vessels are completely cylindrical. Capacities indicated are brim-full volumes. Glass Type I/neutral glass as per USP, EP and JP. Autoclavable. DURAN Group 6 Capacity DN Capacity Flange Body Height Pressure dia. dia. ml ml bar *. *. *.0 *.0 * * Maximum permissable operating pressure measured at C.

11 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Distillation/Jointed glassware Tubing adapters for heating and cooling connection For metal or standard tubing connectors with secure, quick attachment/release, using spring insert technology. Type For DN, M 6 x thread For DN, M x. thread For DN, M 6 with integral Pt00 For DN, D olive-shaped connection For DN, D olive-shaped connection PTFE comb seal DN Graphited flat seal for temperatures above + C Pin spanner for DN metal adapter to ensure secure mounting Flat flange beakers DURAN Flanged neck with groove for vacuum use. Maximum 0.bar working pressure at C. Capacities indicated are brim-full volumes. We recoend that these beakers are heated in water or oil baths. Glass Type I/neutral glass as per USP, EP and JP. Autoclavable. DURAN Group Flange diameter: Beaker diameter: 8 0 Capacity DN Capacity Height ml ml Flat ground flange lids DURAN With four ground joint necks as outlined below. Centre neck NS. bar max. operating pressure at C. Glass Type I/neutral glass as per USP, EP and JP. Autoclavable. DURAN Group DN Flange dia. Height Side necks NS 8 x angled 8 0 x angled, x / parallel 8 0 x parallel 8 0 x angled, x / parallel Quick-acting closures Stainless steel. With three-part caliper clamps. Lenz For flange DN O-rings VMQ silicone. With, or without, FEP coating. Lenz Type VMQ VMQ VMQ VMQ + FEP VMQ + FEP VMQ + FEP VMQ + FEP For Dia. Thickness flange DN

12 6. Distillation, Separation, Filtration Distillation/Jointed glassware GENERAL CATALOGUE EDITION 7 Three-way holder Holding mechanism for Schott laboratory flanges to allow alternating removal of container and lid. 8/0 steel. Shaft and 6.9 diameter. Without accessories: Stands, bossheads, centring holders, vessel, cap. Bochem Jaw opening Dia Round bottom flasks, narrow neck, DURAN To DIN ISO 77. Narrow neck. With beaded rim. Glass Type I/neutral glass as per USP, EP and JP. Autoclavable. DURAN Group Capacity Dia. Neck Height dia. ml Flask, ground glass joint, Engler, DURAN Due to the wall thickness distribution, it is suitable for use as a heating vessel and for distillation. Glass Type I/neutral glass as per USP, EP and JP. 9/6 socket. With 7 diameter side arm, length 00. Autoclavable. DURAN Group Capacity Dia. Height ml Kjeldahl flasks DURAN To DIN 60. With beaded rim. DURAN Group Capacity Dia. Neck Height dia. ml Note: special s available on request. 6

13 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Distillation/Jointed glassware Round bottom flasks, borosilicate glass. - manufactured from borosilicate glass. which is resistant to heat and almost all chemicals. - meets the highest quality standards according to DIN EN ISO reinforced rims are used to prevent breaking during washing and transportation. Isolab Capacity Height approx. Neck dia. approx. ml Flask external dia. approx. NS / / /9 9/6 /9 9/6 /9 9/6 /9 / Round bottom flasks, ground glass joint, DURAN To DIN 797. Cone taper :0. Lenz Capacity Flask external dia. NS ml / / / / / / 9/6 9/6 9/6 9/6 /9 /9 /9 /9 /9 /0 /0 /0 /0 /0 /0 /0 /0 /

14 6. Distillation, Separation, Filtration Distillation/Jointed glassware GENERAL CATALOGUE EDITION 7 Round bottom flasks, DURAN Amber glass. With NS. To DIN EN ISO 797. Lenz Capacity ml Round bottom flasks with two necks, borosilicate glass. Borosilicate glass. which is resistant to heat and almost all chemicals. They have thick Isolab walls, heavy bases and reinforced rims which prevent breaking. They meet the highest quality standards according to DIN 9. Side arms are either parallel or degree angled with each other. NS necks are in compliance with DIN standards. Central socket (NS): Side necks (NS): / or Capacity Flask external dia. Central neck Parallel side necks Description ml NS / / / angled side arm angled side arm angled side arm parallel side arm parallel side arm parallel side arm Round bottom flasks with two necks, DURAN. DIN 9. Two-neck, side neck parallel. Central socket (NS): Side necks (NS): / or Lenz Capacity Flask external dia. Central neck Parallel side necks ml NS / / / / /

15 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Distillation/Jointed glassware Round bottom flasks with two necks, DURAN DIN 9. With one central and one 0 side angled ground joint necks as outlined below. Lenz Capacity Flask external dia. Central neck Side necks ml NS / / / / /9 / / / / 9/6 / / / / / 9/6 9/6 9/6 9/ Round bottom flasks with three necks, borosilicate glass. Borosilicate glass. which is resistant to heat and almost all chemicals. They have thick walls, heavy bases and reinforced rims which prevent breaking. They meet the highest quality standards according to DIN 9. Side arms are at a degree angle to each other. NS necks are in compliance with DIN standards. Isolab Capacity Flask external dia. Central neck Side necks ml NS / / / / 9/6 9/6 9/ Flasks, plastic, round bottom with conical joint socket, PFA Transparent. Excellent temperature and chemical resistance. With NS conical joint. For rotary evaporators and ultra-pure chemical distillation. VITLAB Capacity Dia. Height ml

16 6. Distillation, Separation, Filtration Distillation/Jointed glassware GENERAL CATALOGUE EDITION 7 Round bottom flasks, ground glass joint, three neck, parallel, DURAN DIN 9. All necks are parallel. Lenz Capacity Central socket Side necks Flask external dia. ml NS NS /9 /9 /9 /0 /0 /0 /0 /0 /0 9/6 9/6 9/6 / / / / / / / 9/6 9/6 9/6 9/

17 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Distillation/Jointed glassware Round bottom flasks, ground glass joint, three neck, angled, DURAN DIN 9. Central neck with x angled side necks. Lenz Capacity Central socket Side necks Flask external dia. ml NS NS /6 /9 /9 9/ /0 /0 /0 /0 /0 /0 / 9/6 9/6 9/6 / / 9/6 / 9/6 / 9/6 / Lenz laboratory glass instruments are also available with PU coating, autoclavable Receiving flasks, DURAN Spherical. With S spherical ground joint. Lenz Capacity Type ml spherical, S spherical, S spherical, S spherical, S spherical, S spherical, S, plastic coated spherical, S, plastic coated spherical, S, plastic coated

18 6. Distillation, Separation, Filtration Distillation/Jointed glassware-round bottom flasks and accessories GENERAL CATALOGUE EDITION 7 Rotary evaporator flasks, ground glass joint Pear shape. Single, central neck. Lenz Capacity Socket ml NS PUR Coating, autoclavable Physical Properties Autoclavable C/.0 bar/0 minutes - max. 00 cycles Transmission absorption up to 80nm Long-term heat resistance up to C Max. heat resistance up to C for a short time Suitable for freezing -0 C Suitable for microwave use Chemical Properties (Resistance) Water up to 00 C/ min. constant exposure Organic solvents room temperature/ min. constant exposure -alcohol - acetone -tetra Inorganic acids, bases room temperature/ min. constant exposure - hydrochloric acid ( up to 0%) - nitric acid (up to 0%) - sulphuric acid (up to 0%) - caustic soda (up to 0%) Cleaning resistance Standard disinfectants and detergents - industrial washers/clinic up to cycles/ max. 9 C - household dishwashers up to cycles/ max. 6 C Lenz Nitrogen Round-bottom Flasks (Schlenk-Flasks), DURAN With conical joint and NS stopcock Lenz Capacity NS Stopcock type ml / / / / NS Vacuum sublimation apparatus Enables effective cleaning of chemicals and substances that turn from solids to vapours directly without liquidifying first and solidifying again on cooling. The cleaned sublimate can be fully recovered from the conical cooler without difficulty once the sublimation process is complete. Type Micro apparatus, complete, sublimate quantity g to g Semi-micro apparatus, complete, sublimate quantity g to 7g Macro apparatus, complete, sublimate quantity 0g to g

19 GENERAL CATALOGUE EDITION 7 Flask rings Pressed cork. Height Distillation, Separation, Filtration Distillation/Round bottom flasks and accessories For flasks Ext. diam. Int. dia. ml 0 / / / Flask ring, PP. Provides a secure base for round bottom flasks from 0ml to 0000ml capacity. Kartell Dia. Height Flask support rings, "BiBase". Double sided. Sits firmly on the bench to support round-bottomed flasks. - Very soft and easy to clean - Resistant to chemicals - Good thermal and electric insulation - Excellent adhesion with glass -Non-slip Available in two qualities: Black rubber, good adhesion to glass. Blue silicone elastomer, resistant to oxidation and temperatures from -60 to +00 C. For flasks: Narrow dia./wide dia. /Height: to 0ml: 6/80/0 0 to 000ml: 80/0/0 000 to 6000ml: 0/6/ Material Rubber Rubber Rubber Silicone elastomer Silicone elastomer Silicone elastomer For flasks ml to 0 0 to to 6000 to 0 0 to to 6000 Max. kg LAB rings Rings to stabilise glassware and plasticware on shakers or to ierse in water baths. Vinyl-coated lead rings will not mark or scratch benchtops and labware. Type O-Shape O-Shape O-Shape O-Shape O-Shape C-Shape C-Shape C-Shape C-Shape Lead Ring Stand, holds up to 8 rings For flasks ml to 0 to 0 to to to 000 to 0 to to to 000 Int. dia

20 6. Distillation, Separation, Filtration Distillation/Round bottom flasks and accessories GENERAL CATALOGUE EDITION 7 Lab sleeves Lead. Cylindrical, with opening. Provides a stable bench support for a variety of vessels, or used to sink flasks in waterbaths. Sealed in strong PVC. Flexible. Can be opened, closed or adapted to the diameter of the laboratory flask. For dia. Int. Weight dia. g 8 to 9 9 to 7 7 to to Flat bottom flasks, NS joint neck, borosilicate glass. - Borosilicate glass. which is resistant to heat and almost all chemicals. - Meets the highest quality standards according to DIN EN ISO Reinforced rims are used to prevent breaking during washing and transportation. Isolab Capacity ml Height approx NS Flat bottom flasks, ground glass joint, DURAN DIN EN ISO 797. With standard ground sockets to DIN. Cone taper :0. Lenz Capacity Neck dia. Flask external dia. NS ml Up to 00ml made of DURAN tubing

21 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Distillation/Round bottom flasks and accessories Flat bottom flasks DURAN DIN ISO (wide mouth), DIN ISO 77 (narrow mouth). With beaded rim. Glass DURAN Group Type I/neutral glass as per USP, EP and JP. Uniform wall thickness distribution makes these beakers ideal for heating applications. Flat base means flasks can be set down without a supporting ring. Autoclavable. Capacity Dia. Neck Height Description dia. ml * ** wide mouth wide mouth wide mouth wide mouth wide mouth wide mouth wide mouth narrow mouth narrow mouth narrow mouth narrow mouth narrow mouth narrow mouth narrow mouth narrow mouth * Non to DIN, with reinforced rim. **Not to ISO. Erlenmeyer flasks, NS neck, borosilicate glass. Borosilicate glass.. Resistant to heat and almost all chemicals. They meet the highest quality standards according to DIN 87. NS necks are in compliance with DIN standards. Inscriptions are in white enamel which is specially designed for glass use. Isolab Capacity Height NS ml / 9/6 /

22 6. Distillation, Separation, Filtration Distillation/Round bottom flasks and accessories GENERAL CATALOGUE EDITION 7 Erlenmeyer flasks, ground glass joint, DURAN DIN EN ISO 797. With standard ground sockets. Lenz Capacity Height NS Flask external dia. ml 00 00* 00 * 00 0* / / / /0 /0 / 9/6 /9 /0 9/6 9/6 9/6 9/6 /9 /9 9/6 /9 /9 /9 /0 /0 /0 / * Can be used as iodine flasks

23 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Distillation/Round bottom flasks and accessories-distillation-accessories Iodine determination Flasks, Duran Two types available: - With overflow collar and NS iodine stopper. - Without overflow collar, with NS hollow hexagonal stopper. Lenz Type Capacity NS ml without collar without collar without collar without collar without collar with collar Pear shape flasks, ground glass joint, DURAN DIN 8. With conical joint and inscription label. Lenz Capacity NS Flask external dia. ml 0 00 / / / / Air regulator Type HM- For tubes: 8 to diameter, 6 to. diameter For air-leak capillary tubes. Acts as a fine regulation valve (needle valve). Plastic body. Brass needle with fine thread. Type HM

24 6. Distillation, Separation, Filtration Distillation/Distillation-Accessories GENERAL CATALOGUE EDITION 7 Air leak capillary tubes, ground glass joint DURAN tubing. DIN 0. For cutting off, or drawing out, to required length. Cone : /. Lenz Dia. Length Air leak rod, DURAN With bulb. Width Length Glass beads Type AR soda lime glass. Supplied in packs of approx. kg. Lindner Dia Boiling stones, type B Specifically for analytical work. Can be used for distillation in a clean, neutral and basic environment. Not suitable for vacuum distillation. Effective in the smallest amounts of liquid, also after multiple distillations. Prevents " bumping". Ceramic product with relatively high level of purity and abrasion resistance. Type Capacity g B Boiling chips, type Resistent Developed for preparatory and analytical purposes. Suitable for biochemistry, biotechnology, microbiology, microanalysis. Can even be used in strong acids and alkalis, and in all solvents and oxidants. Suitable for vacuum and high-vacuum distillation. Reduces distillation times in rotary evaporators. No abrasion, absorption of substances or solvents. Softening (evaporation) occurs at 0 C. Can be sterilised by dry heating. Effective in even the smallest volumes of liquid, even after multiple interruptions. Prevents any bumping. Highly resistant. Type Capacity g Resistent Boiling chips, Type A Developed for use in preparatory work. For distillation and reflux in aqueous, neutral and alkaline solvents, even under a vacuum. Effective in even the smallest volumes of liquid and after multiple interruptions. Prevents any bumping. Natural product. Type Capacity g A

25 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Distillation/Distillation-Accessories-Glass components Boiling stones, PTFE Protects against overheating. Minimises bubbling during reflux. Speeds up the distillation process. Remains inert when boiling acids, hydrocarbons, ketones, esters, alcohol or alcohol solutions in any concentation. Unlimited life span. Easy to clean. Does not scratch glass or leave any powdery residue. Capacity g Connectors with NS joint Resistant to heat and almost all chemicals. They meet the highest quality standards according to DIN. They have excellent grinding to prevent airleaks. The bottom part of the ground joints are fire polished. Isolab Description NS Length socket socket socket socket socket socket socket cone cone cone cone 0/9 / / 9/6 /9 /0 / 9/6 / Connectors with NS joint DURAN tubing. DIN 9. Annealed edges. Joint rims slightly rounded. Cone shape B. Socket shape E. Cone with extension shape G. Lenz 6 Description NS Ext. diam. Cone 0/9 8 Cone / Cone / Cone 9/6 7 Cone /9 Cone 6 Cone /0 0 Socket 0/9 Socket / Socket / 7 Socket 9/6 Socket /9 8 Socket Socket /0 Cone with outlet / Cone with outlet 9/6 7 Cone with outlet /9 Cone with outlet 6 Cone with outlet /0 0 Length

26 6. Distillation, Separation, Filtration Distillation/Glass components GENERAL CATALOGUE EDITION 7 Spherical ground glass joints DURAN tubing. DIN. With ground glass ball (male) and cup (female) joints. Cup joints have a beaded reinforcement rim. Lenz Type Grinding Tube dia. Cup S / 8.0 Cup S / 8.0 Cup S 9.0 Cup S Cup S 8.0 Cup S Cup S Ball S / 8.0 Ball S / 8.0 Ball S 9.0 Ball S Ball S 8.0 Ball S Ball S Threaded tube connectors, borosilicate glass. Borosilicate glass. according to DIN 7 standard. Isolab Neck thread Cone GL 8 8 NS / / Threaded tube connectors Made of DURAN tubing. DIN 7. Double ended. With GL thread at one end and ground glass at the other. NS cone at the other, as outlined below. Lenz Neck thread Cone GL 8 8 NS / / / / Adapter for thermometer, borosilicate glass. Manufactured from borosilicate glass. according to DIN 7 standard,ideal to use for thermometers with joint glassware. Screw joint provides easy depth adjustment of thermometer. Isolab Neck thread Cone Adapter bore Ø GL NS /

27 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Distillation/Glass components Adapter for tubing, borosilicate glass. Manufactured from borosilicate glass. in two different forms, straight or angled. Supplied with PTFE stopcock which has of. diameter bore key. Tubing adapter is suitable for up to 0 tubings. Isolab Cone Description NS / / / / straight form, with stop cock straight form, without stop cock bent form, with stop cock bent form, without stop cock straight form, with stop cock straight form, without stop cock bent form, with stop cock bent form, without stop cock Cone: flexible tubing adapter DURAN tubing. Adapter, NS cone to 0 bore tubing connector. Straight or angled ( ). Available with, or without, NS stopcock, with. bore key. Lenz NS Form Stopcock / / / / straight straight bent bent straight straight bent bent with without with without with without with without Adapters, ground glass joint, expansion/reduction Manufactured from borosilicate glass. which is resistant to heat and almost all chemicals. They meet the highest quality standards according to DIN 7. They have excellent grinding to prevent airleaks. The bottom part of the ground joints are fire polished. Isolab Socket Cone NS / / / 9/6 9/6 9/6 /9 /9 /9 /9 NS 9/6 /9 /9 / / /0 / Adapters, ground glass joint, expansion Manufactured from borosilicate glass. which is resistant to heat and almost all chemicals. They meet the highest quality standards according to DIN 7. Expansion adapters have socket s larger than their cone s. Isolab Socket Cone NS 9/6 NS / / 9/6 /9 /

28 6. Distillation, Separation, Filtration Distillation/Glass components GENERAL CATALOGUE EDITION 7 Adapters, ground glass joint, expansion/reduction DURAN tubing. DIN 7. Reduction and Expansion Adapters with Ground joint. Lenz Socket Cone NS / 9/6 /0 NS / / 9/6 / Threaded tubes DURAN tubing. DIN 6. For tubing extension and connection. With DIN screwthread. Lenz Neck thread Dia. Length GL Gas sampling tubes, glass DURAN tubing. To DIN 7. With. bore stopcocks. Stopcocks are provided with elastic key retainers. With, or without, sampling connections. PU protective coating available on request. Lenz Capacity Length* External body dia. ml * Body length () Type Without sampling connections Without sampling connections Without sampling connections With sampling connections With sampling connections With sampling connections Gas washing bottle, PP ml graduated cylinder with Vikem vinyl stopper. With insert and 70µm PE frit. Type Gas washing bottle

29 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Distillation/Glass components Gas wash bottle reservoirs DURAN. In accordance with Drechsel. Ground joint. DIN 6. Overall height 00. With or without foot. For 000ml capacity requirement, please use the burette flask, order no BRAND Capacity Type ml 00 0 with foot with foot without foot Gas wash bottle reservoirs In accordance with Drechsel. Ground joint. DIN 6. Overall height 00. Rettberg Description Gas wash bottle reservoirs 0 ml Without frit With frit Caps for gas washing bottles DURAN tubing. Ground joint. With or without diffuser frit Lenz Type Porosity Description Without frit With frit With frit 0 0 nozzle nozzle nozzle

30 6. Distillation, Separation, Filtration Distillation/Glass components GENERAL CATALOGUE EDITION 7 Gas washing bottles, Borosilcate glass. Head with fritted disc, standard taper joint. Capacity Porosity NS Int. Height dia. ml 00 / / Gas washing bottles and columns Tall, slim scrubber column made of FEP. Inlet and outlet tube as well as riser tube are made of FEP (.6 x 8), bottom and top are made of pure PTFE. The standard PTFE frit has a pore of approx. µm and is screwed onto the riser tube with an M8x thread. Temperature resistance: from -00 C to +0 C - transparent - unbreakable - intense mixing of gas due to tall riser tube - frit easily exchangeable BOLA Type Capacity Height For external tube/pipe Column Column ml Scrubber Bottles Vitrum, borosilicate glass/ptfe Consisting of PTFE body with screw cap and two lateral GL 8 threaded necks, suitable BOLA borosilicate glass bottle as well as a FEP inlet tube and a gas distributor with finest bores. Easy inlet and outlet of gas by means of hard-walled tubing (e. g. PTFE) which can be connected to the threaded necks with BOLA Laboratory Screw Joints. Elastic tubing can be connected by means of hose connectors. The special feature - the body of the distributor can be turned independently from the screw cap, thus the completely assembled distributor can be removed and fixed onto another bottle without the risk of disarranging the tubing. Suitable for Vacuum. Specifications Material: borosilicate glass. Temperature resistance: from -00 C to + C Chemical resistance: universal Autoclave: C Thread of screw cap GL: x 8 Capacity Height Thread ml GL GL GLS 80 GLS Drying tubes DURAN tubing. Angled to 7. Lenz Cone NS / Drying tubes LDPE. Removable stoppers at both tube ends. With tubing nozzles, to 9 o.d. Kartell 8 Length

31 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Distillation/Glass components Drying tubes, U-pattern DURAN tubing. DIN 66. With or without interchangeable ground joint stopcocks. U-shape, tube diameter. Hose connectors 8 in diameter. Lenz Length NS 00 0 / / 9/6 without DURAN. Bubble counter Height Bubble counter DURAN borosilicate glass. Modified, with NS./ cone for direct mounting onto apparatus assemblies, screw neck and cap for filling with oil and tubing connector. Type Bubble counter

32 6. Distillation, Separation, Filtration Distillation/Glass components GENERAL CATALOGUE EDITION 7 Stopcocks, straight bore with solid glass key stopcock Duran tubing. DIN -. With solid glass key stopcock and retaining device. Straight bore. Leakage rate acc. to DIN 0-. Lenz Description NS Bore DIN With solid glass key With solid glass key With solid glass key With solid glass key With solid glass key With solid glass key With solid glass key With solid glass key With solid glass key With solid glass key With solid glass key Spare key, solid glass Spare key, solid glass Spare key, solid glass Spare key, solid glass Spare key, solid glass Spare key, solid glass * with capillary side arms **with rubber retaining device ** ** 9.**.*.* Vacuum stopcocks, glass, Vendura-Nova Vendura-Nova DURAN. With PP safety device. Adjustable seal. Comprises of glass stopcock body, PTFE needle with sealing ring and FKM O-rings. Fine control gives precise flow metering. Available in straight or angle patterns. Leak rate: < x 0-6 mbar l/s Temperature resistant to with safety device: 0 C without safety device: 80 C DURAN Group Type straight straight straight angle angle angle Tube dia Flow rate ml / min. 0 to. 0 to.0 0 to to. 0 to.0 0 to PTFE sealing rings for jointed glassware An effective alternative to coon PTFE joint sleeves and PTFE stoppers: - Air leakage <0-8 to 0-6 mbar *l/s (vacuum and pressure). - Solvent leakage from containers < 0. to 0.0mg/day. Temperature range: -96 to 00 C Rings can be matched to "Keck" plastic joint clamps. Reuseable, do not deform. NS

33 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Distillation/Glass components Sleeves, cone joint, PTFE With knurled gripping ring at the top of the cone for easy removal. For gas, liquid and vacuum-tight cone joint connections with s as outlined below. Reusable. With reinforced external ribs for a high-vacuum tight seal (leakage rate: < x0 - mbar x I x s - ). No joint sealant or grease required. BOLA NS / 9/6 /9 / Sleeves with ribs, PTFE For use with ground glass joints. Suitable for vacuums up to 0.mbar. Reusable and long lasting. The sealing ribs grip on the inside wall of the glass socket, sealing without the need for grease and enabling the cone to be freed easily when required. BOLA NS / / 9/6 /9 / Sleeves, PTFE, disposable Seals without grease - no grease residues are left in the analysis. Excellent chemical resistance. Can be used in temperatures from -00 to +60 C. Wall thickness only 0.0. Wide range of applications, also suitable for vacuums down to 0.mbar, e.g. for rotary evaporators. BRAND NS 7/6 0/9 / / 9/6 /9 / 0/8 /0 / / 60/ Silicone high vacuum grease Silicone high vacuum grease are used for ground joints and taps at low ultimate pressure. Like vacuum grease LOSOID is very stable during temperature changes, though its lubricating properties at high and low temperature are not as good. At temperures above 00 C the silicone grease continue to be polymerized and begins to outgas. 00g tube. Type Silicone high vacuum grease 9.6 Silicone high vacuum grease For use up to 0-6 mbar. Temperature range from -0 to + C. 00g tube. Type Silicone high vacuum grease

34 6. Distillation, Separation, Filtration Distillation/Glass components GENERAL CATALOGUE EDITION 7 Baysilone silicone high vacuum grease For use up to 0-6 mbar. - to +00 C. Supplied in g tube. Type Low viscosity Medium viscosity High viscosity Silicone oil high vacuum grease, Wacker For use up to 0-8 mbar. Temperature range from -0 to +00 C. Supplied in ml tube. Grade Heavy Joint grease, K.W.S Without silicone. Suitable for use with foodstuffs. Designed as vacuum and high vacuum grease. No silicone derivatives, polymerisation or guing. Excellent adhesion and viscosity. Acid/alkaline resistant. Locked joints can be loosened by brief, gentle heating. Can be used to make temporary glassware repairs. Biodegradable. Non-toxic in normal use. Working temperature range: Vapour pressure: -0 to +00 C mbar. Capacity ml Stopcock and ground joint greases, GLISSEAL For sealing and lubricating fixed, and rotating, ground glass joints, stopcocks, plastic or metal connections and for solving even the most difficult lubrication problems, e.g. in fine mechanisms and the optics industry. Only a very thin application is required, and it is easy to remove, by using deconex cleaning concentrates. Supplied in tubes of 60g. Normal quality, with red cap: Colour: white, translucent Dripping point: without Working temperature ranges: in air: -0 to 00 C under vacuum: -0 to 00 C For short periods, up to: C High vacuum quality, with blue cap: Colour: dark brown, transparent Dripping point: without Working temperature range: in air: -0 to 0 C under vacuum: -0 to 0 C For short periods, up to: 00 C Type Normal quality GLISSEAL High vacuum quality GLISSEAL Rotating joint grease, silicone-free, Alsirol Silicone-free stopcock grease. Suitable for use with foodstuffs. No silicone derivatives, polymerisation or guing. Excellent adhesion and viscosity. Stable grease film enables safe, long term use. Low heat-up occurs during rotation even if operation is continuous. When sealing glassware systems with glass and metal stirrers and shafts Alsirol protects rotating, precision-ground sockets and stirring shafts against glass abrasion. Also suitable for lubricating rotating metal and glass components. Acid and alkali resistant. For use under vacuum and high vacuum. Biodegradable. Non-toxic in normal use. Working temperature range: -0 to +00 C Vapour pressure: mbar Capacity ml 9.6 9

35 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Distillation/Glass components BUDDE - joint grease For all glass joints. Transparent, vacuum tight, water washable and water soluble. Maintains practically the consistency between -0 C and +00 C, non-solidifying. Compatible with most elastomers, biodegradable. Tube of 80g. Buddeberg Weight g Clips for joints, POM Manufactured from POM and has excellent chemical resistance as well as a very good mechanical strength. They are perfect tools to join two ground joints. Isolab Joint Colour NS 0/9 / / 9/6 /9 / /0 black purple yellow blue green red orange brown Conical joint clips for sleeve connections, plastic POM. Melting point 7 C. For conical ground joints. Excellent chemical resistance. Rigid. NS Colour green violet yellow blue green red orange yellow brown Ground joint clips for sleeve connections, wire Chrome-nickel steel. NS 0/9 / / 9/6 /9 / Clipox NS Clips For conical joints, can also be used to secure flasks with ground joints & glass stoppers Clipox - increases the safety of glass vessels; the syetric, slim and aligned design solves various application problems of coon clips and clamps (can be used with retort clamps) - secure horizontal and vertical connection with security in the event of pressure overload - two-sided handles enable easy mounting and removal - spring steel wire provides long working life and firm grip - will not break or age because of outstanding thermal, chemical and acid resistance, due to stainless steel AISI 6 Ti, Cr-Ni-Mo reduced abrasion due to polished surface of material - made in Germany, with production certified according to ISO0. Joint NS

36 6. Distillation, Separation, Filtration Distillation/Glass components GENERAL CATALOGUE EDITION 7 Joint clips for conical joint sleeve connections Chrome-nickel steel. For tapered ground joints as outlined below. With, or without, locking screw. Axel von Gunten NS Type / 9/6 /9 /0 / 9/6 /9 /0 with locking screw with locking screw with locking screw with locking screw with locking screw without locking screw without locking screw without locking screw without locking screw without locking screw Spherical joint clips, plastic POM. Melting point 7 C. For spherical ground joints. Excellent chemical resistance. Rigid. NS Clipox KS Clip Clipox KS Clip for Spherical Joints Clipox - secure horizontal and vertical clamping with security in the event of pressure overload - two-sided handles enable easy mounting and removal - spring steel wire provides long working life and firm grip - will not break or age because of outstanding thermal, chemical and acid resistance, due to stainless steel AISI 6 Ti, Cr-Ni-Mo reduced abrasion due to polished surface of material - made in Germany, with production certified according to ISO0. Size S- S8-9 S8-9 S- S Ground joint clips, metal Chrome-nickel steel. For spherical ground joint connections. With locking screw. Lenz Size

37 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Distillation/Glass components Clipox SB Clip For narrow and wide neck reagent bottles Clipox - new clip to secure reagent bottles - secures stopper in the event of pressure overload - two-sided handles enable easy mounting and removal - spring steel wire provides long working life and firm grip - will not break or age because of outstanding thermal, chemical and acid resistance, due to stainless steel AISI 6 Ti, Cr-Ni-Mo reduced abrasion due to polished surface of material - made in Germany, with production certified according to ISO0. Joint NS Clipox HS Retaining Device for Stopcocks For all glass- or PTFE-keyed burette and vacuum stopcocks Clipox - one-piece replaces three-piece retaining device - retaining device operates irrespective of screwthread - will not break or age due to outstanding thermal, chemical and acid resistance, manufactured in polished stainless steel AISI 6 Ti, Cr-Ni-Mo spring steel wire provides long working life and firm grip - two-sided handles enable easy mounting and removal - made in Germany, with production certified according to ISO0. Joint NS NS-Glass stoppers, hollow Borosilicate glass. Manufactured from borosilicate glass. which is resistant to heat and almost all chemicals. They meet the highest quality standards according to DIN. Lower closed end of stopper features a drip-tip to ensure adhered liquid is returned to the flask. Hexagonal flat head prevents the stopper from rolling and allows stopper to be stood on end preventing contamination of the ground surface. Isolab NS Description 0/9 / / 9/6 /9 / 0/9 / clear clear clear clear clear clear clear amber amber NS stoppers,pe-hd Isolab NS 0/9 / / 9/6 /

38 6. Distillation, Separation, Filtration Distillation/Glass components GENERAL CATALOGUE EDITION 7 NS-Glass stoppers, DURAN and Borosilicate glass DIN. Hexagonal-hollow or octagonal-solid. NS Description 7/6 0/9 / / 9/6 /0 0/9 / / 9/6 /9 / /0 Borosilicate glass., hollow, hexagonal Borosilicate glass., hollow, hexagonal Borosilicate glass., hollow, hexagonal Borosilicate glass., hollow, hexagonal Borosilicate glass., hollow, hexagonal Borosilicate glass., hollow, hexagonal Borosilicate glass., hollow, hexagonal DURAN, solid, octagonal Borosilicate glass., solid, octagonal Borosilicate glass., solid, octagonal Borosilicate glass., solid, octagonal Borosilicate glass., solid, octagonal Borosilicate glass., semi solid, octagonal Borosilicate glass., semi solid, octagonal DURAN, semi solid, octagonal Conical stoppers Polyethylene. Stoppers manufactured to DIN standard ensuring an effective seal, even on non-standard surfaces. NS 7/6 0/9 / / 9/6 /9 / Bottom dia Colour violet blue green brown yellow red black white Stoppers PE. Fits standard conical joints. Supplied singly. NS 7/6 0/9 / / 9/6 /9 /0 60/

39 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Distillation/Glass components Rubber stoppers DIN 87. Solid. Deutsch & Neumann Bottom Top Height dia. dia Silicone stoppers Airtight seal. Lightweight, very flexible, autoclavable. Temperature resistant from -60 to +00 C. Colour-coded sizing, odourless and non-toxic. Water-repellent. Easy to bore, as with cork stoppers. Bottom Top Height Colour dia. dia White Pink Yellow Green Blue White Pink Yellow Green Blue White Silicone rubber stoppers Transparent. To DIN 87. Solid. Operating temperature up to C. Supplied singly. Deutsch & Neumann Bottom Top Height dia. dia

40 6. Distillation, Separation, Filtration Distillation/Glass components GENERAL CATALOGUE EDITION 7 Stoppers with turn-over flange Silicone or natural rubber. These stoppers guarantee perfect sealing even with poorly finished rims on glass or plastic bottles. The top of the stopper has a septum which can be punctured by a hypodermic needle. Very secure fit prevents accidental opening. Material Dia. Silicone Silicone Silicone Silicone Silicone Silicone Silicone Silicone Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Cork stoppers A superb quality. Non-porous. Top Bottom Height dia. dia

41 GENERAL CATALOGUE EDITION 7 Parallel Synthesisers Synthesis Time-saving Synthesising 6. Distillation, Separation, Filtration Distillation/Rotary evaporators Heidolph Three methods - all in one Depending on volume and reaction vessel, you can choose from possible options for the solid phase, liquid phase or multiple evaporator reaction system - One base unit only accepts reaction blocks for solid phase applications with gentle vortexing that does not damage resin - Reaction block features four heating zones which allow you to apply selectively different temperatures and facilitate reaction optimization - Exceptional visual control of reaction in each vessel and iediate access to every sample due to circular design - Optional temperature sensor positioned in the reaction vessel enables the most accurate temperature control and reproducibility - Exceptional chemical resistance due to PTFE and PFA material, resin will not stick to inner walls of reaction vessel and provides clear visibility of the sample - Perform reactions at temperatures as low as -80 C via external chiller - Fast heat transfer from the heating zone allows for sample temperature settings up to 60 C Specifications Reaction tubes for solid phase Transparent, PTFE/PFA Reaction tubes for liquid phase Glass (locks made out of PTFE) Reaction tubes for multivapour Glass (locks made out of PTFE) Vibration frequency 00 to 000rpm Orbit Rotation drive brushless, electronic d.c. motor Heating aluminum block with heating zones featuring separate temperature control and display Heating power approx. 000W Temperature range up to 60 C down to -80 C by external chiller Control accuracy ± C in aluminum block Temperature display digital Temperature ramp program different temperature settings with max. 9 ramps per heating zone Connection for vacuum/inert gas atmosphere via distributor block Injection of solvent for rinsing: via septa Waste Cube vessel (solid phase synthesis) approx. 000ml Interface: RS for monitoring and controlling temperature, vibration frequency, pressure Protection class: IP 0 Operation conditions: 0 to 0 C at max. 80% relative humidity Footprint (W x D): 0 x 0 Voltage: 0V /60Hz or V /60Hz Parallel Solid Phase Synthesis - Synthesis Solid For solid phase reactions and processes by iobilisation of the material with a resin. Synthesis allows for adding samples, splitting off or cleaving from the resin, filtration of by-products and purification of the product. Heidolph - Exceptional chemical resistance due to PTFE and PFA material, resin will not stick to inner walls of reaction vessel and provides clear visibility of the sample - Easy and quick refilling of vessels via needle through septa - The bottom part of the reaction vessel accoodates the filter, valve and tube connector for vacuum filtration - Reaction vessel screw fitting allows for easy and iediate access for filter replacement - All vessels can be fully disassembled in just seconds and allow for easy cleaning Type Description Synthesis Solid 6 Synthesis Solid 0 Synthesis Solid 6 reaction vessels of ml each 0 reaction vessels of ml each reaction vessels of 8ml each

42 6. Distillation, Separation, Filtration Distillation/Rotary evaporators GENERAL CATALOGUE EDITION 7 Parallel Liquid Phase Synthesis - Synthesis Liquid The Synthesis Liquid is best for reactions and processes without the use of resins. Synthesis allows for synthesis and work up of solution phase chemical synthesis. Heidolph - The vessel and septa have been specifically engineered to ensure for optional septa fixing, even at high speeds and in a robust environment - The PTFE cap accoodates the septa, valve and connection for vacuum and inert gas - To avoid any damage to the silicone septa and protect you from solvents or aggressive media such as acids. A PTFE coating gives the septa additional resistance - Transparent glass vessels allow for visibility of samples and they are chemically resistant - Vessels come with standard GL theards. Finished samples can be stored with conventional screw caps - Easy and quick refilling of vessels via needle through septa Type Description Synthesis Liquid Synthesis Liquid 6 Synthesis Liquid x ml reaction vessels 6 x ml reaction vessels x 0ml reaction vessels Parallel Synthesis Multiple Evaporator - Synthesis Multiple Evaporator Most appropriate for simultaneous evaporation or concentration of up to samples. Heidolph The multiple evaporator is an ideal addition to the liquid phase Synthesis. - This model is identical with Synthesis liquid and features - Glassware assembly for the Synthesis allows for solvent recovery - Guard and temperature hood to avoid a loss of heat and ensures fast heat up under constant sample temperature. In addition, the hood serves for added safety to the operator - the heating zones on each reaction block allow you to evaporate solvents with different boiling points simultaneously Type Description Synthesis Multi-evaporator Synthesis Multi-evaporator 6 Synthesis Multi-evaporator x ml reaction vessels, with glassware set and guard hood 6 x ml reaction vessels, with glassware set and guard hood reaction vessels of 0ml each, with glassware set and guard hood Inert gas box for Synthesis Ideal for operation with the Synthesis while working at temperatures below 0 C. The Heidolph box prevents the formation of ice on the Synthesis unit by exchanging moisture containing air with a dry inert gas. Inert gas box is made of transparent PMMA panels to provide clear visibility of all samples and for added safety. Type Inert gas box for Synthesis We can supply this manufactorer s whole product range! 9

43 GENERAL CATALOGUE EDITION 7 Accessories for Synthesis 6. Distillation, Separation, Filtration Distillation/Rotary evaporators Heidolph Type Adapter multiple evaporation VAC control automatic RS Reaction Block Solid 6 Reaction Block Solid 0 Reaction Block Solid Reaction Vessel Solid 6 Reaction Vessel Solid 0 Reaction Vessel Solid Filter 6 Filter 0 Filter Septa Solid PTFE Tube (/6") Clamp Ring for PTFE Tubes (/6") PTFE Vacuum Tube Temperature sensor for reaction block Solid 6/0/ and Liquid Guard hood Waste Cube 6 Waste Cube 0 Waste Cube Insert for Waste Cube 6 Insert for Waste Cube 0 Insert for Waste Cube Test Tube Rack 6 for Waste Cube 6 Test Tube Rack 6 for Waste Cube 0 Test Tube Rack 6 for Waste Cube Test Tube for Waste Cube Rack 6 Test Tube for Waste Cube Rack 0 Test Tube for Waste Cube Rack Waste Cube Vessel Blanking Screw Cap Reaction Block Liquid Reaction Block Liquid 6 Reaction Block Liquid Reaction Vessel Liquid Reaction Vessel Liquid 6 Reaction Vessel Liquid Glass Vessel Liquid Glass Vessel Liquid 6 Glass Vessel Liquid Temperature Sensor (70) PTFE Connecting Tube and 6 PTFE Connecting Tube Glassware set Synthesis Septa Liquid Complete Package Synthesis Solid - Base unit Synthesis - Reaction block and reaction vessels - Waste Cube with test tube rack, test tubes and Waste Cube vessel - Guard hood - external sensors for sample temperature measuring - Tubing connection for vacuum and inert atmosphere - PTFE connection tubing for Waste Cube Heidolph Type Synthesis Solid System 6 Synthesis Solid System 0 Synthesis Solid System Complete Package Synthesis Liquid - Base unit Synthesis - Reaction block and reaction vessels - Guard hood - external sensors for sample temperature measuring - Tube connection for vacuum and inert atmospheres Heidolph Type Synthesis Liquid System Synthesis Liquid System 6 Synthesis Liquid System

44 6. Distillation, Separation, Filtration Distillation/Rotary evaporators GENERAL CATALOGUE EDITION 7 Systems for multiple evaporation The systems are identical to the Synthesis Liquid Systems but additionally include glassware set. Heidolph Type Synthesis Multiple Evaporator System Synthesis Multiple Evaporator System 6 Synthesis Multiple Evaporator System

45 Intelligent Evaporation Vapor tube can easily be removed from the drive, thus eliminating the risk of broken glass and significantly reducing spare parts cost Chemical-resistant vacuum seal allows for years of operation and reduces spare parts budget up to 7 % The flange on the condenser side of the drive is made of chemical-resistant PPS, which reduces corrosion as well as maintenance and keeps spare parts cost to a minimum Safety bath will power off if temperature overshoots by C or runs dry Detachable panel allows for the highest operational safety from outside closed fume hoods A metal support between the heating bath and the base unit prevents bath instability Bath power cable coupling complies with protection class IP 67 to prevent corrosion and short circuits A separate ON/OFF switch for heating prevents an unintentional heat-up - the button is illuminated for visual control 0 C heating bath with safety handles and pour spout accoodates -liter flasks The average operational lifespan of 0 years is backed by a -year warranty and makes your purchase a truly worthwhile investment

46 6. Distillation, Separation, Filtration Distillation/Rotary evaporators GENERAL CATALOGUE EDITION 7 Rotary Evaporators Hei-VAP Series Intelligent Evaporation Heidolph For your safety - Two independent safety circuits avoid an overheat situation of your heating bath: If bath temperature overshoots by C and if your water bath runs dry heating will be switched off automatically - To avoid an over temperature situation and potential thermal damage to your sample, you can pre-program on the Precision model a max. SET temperature individually at which the bath shuts off - In case of a power-cut, all motor lift models will remove the flask from the heating bath preventing safety hazards and potential thermal damage to your sample - To protect you from splashes and scalding, the Hei-VAP heating bath features a pour spout to remove bath fluid safely - Heating bath is constructed with a double wall for your protection against burns and scalding - The guard hood covers the entire bath completely even if the heating bath is adjusted horizontally to is most extreme limit - To prevent short-circuits and systematic corrosion from your heating bath, the electrical cable coupling complies with the high protection class IP 67 - For your protection the operating panel is located near the base and keeps your hands out of the dangerous zone of rotating flasks, steam and splashing bath fluids - All heating baths feature non-slip handles with safety grip to protect you from scalding bath liquids and allow for easy installation/removal of the bath - A separate on/off switch for heating prevents an unintentional heat up. If heating is switched on the on/off button is illuminated for visual control - In case of an overshoot of any parameter setting, all models will show a warning on the operating panel - Glassware assemblies are optionally available with transparent plastic safety coating ensuring ultimate protection while allowing visual control at all times For your ease of use - The detachable operating panel can be attached via Velcro or with a special suspension at eye level for your convenience outside of closed fume hoods - The evaporating flask clamp can not be lost due to a connection to the vapor tube coupling ring - A flask ejector feature of the vapor tube coupling ring allows you to remove sticking evaporating flasks from the vapor tube just in seconds in a safe manner - The universal heating bath can be adjusted horizontally up to 00 and offers efficient space to accoodate even liter flasks - For your convenience the height of 60 and the angle of the evaporating flask can be adjusted easily from 0 to 80 Reduced cost of ownership - Reduce your process times depending on your model and periphery up to 0% - The chemically resistant vacuum seal reduces your spare parts budget up to 7% with prolonged operational lifespan - Savings at the same high level are possible due to the long service life vapor tube - Increase your range of applications by using liter flasks in the universal bat hat no added costs - A new coating formula prevents corrosion effectively - The flange on the condenser side of the drive is made of PPS (Poly Phenylene Sulfide), a robust industrial designer resin with superior chemical resistance, and thus provides more chemical resistance than stainless steel or melded aluminum. That reduces corrosion to a minimum which results in additional savings on maintenance and replacement components associated with corrosion effects of moisture condensation from condenser coupled with coon corrosive reagents used in daily laboratory activities - Only Hei-VAP heating baths reach a temperature of 0 C which is 0 C higher than other evaporators on the market and allow for a broader range of applications which previously could not be performed on any rotary evaporator (for example bitumen distillation). Thus increasing the range of applications eliminates the need for investments in other equipment. - Reduce your maintenance costs. The sealed housing protects your rotary evaporator from aggressive fumes, liquids and vapors to prevent internal corrosion. This results in an increased lifespan of 0 years on average at a reduced maintenance and repair cost Specifications Hei-VAP's Size for hand lift models (WxDxH): 9 x 7 x 9 Size for motor lift models (WxDxH): 9 x 7 x Weight (without glass assembly): approx. 7kg Hei-VAP Water bath Temperature range: from +0 C to +0 C Temperature accuracy: < ±K Heating capacity: 00W Volume heating bath:.l Sample /Use of glassware: flasks up to L 98

47 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Distillation/Rotary evaporators Hei-VAP Value Intelligent Evaporation Affordable model with hand lift for all standard applications - Includes all standard Hei-VAP features for safety, ease of use and reduced cost of ownership - The convenience of large dial controls for adjustment of rotation speed and bath temperature - For precise vacuum control and reproducible results we recoend the optional digital vacuum controller - For limited budgets we recoend the optional Manual vacuum controller - Hei-VAP Value models have no digital display Heidolph Description Glassware set G Angled condenser G Angled condenser UK G Angled condenser G Vertical condenser G Vertical condenser UK G Vertical condenser G Vertical condenser UK G Condensate trap G Condensate trap G6 Vertical condenser for reflux distillation G6 Vertical condenser for reflux distillation standard standard coated standard standard coated coated standard coated standard coated Hei-VAP Advantage Intelligent Evaporation Heidolph For your routine distillation applications and reproducible results - Includes all standard Hei-VAP features for safety, ease of use and reduced cost of ownership - Available in hand lift or motor lift configurations - Experience the advantages of our large digital." LCD display which indicates rotation speed, heating bath and vapor temperature - We recoend the optional Manual vacuum controller - Experience the advantages of the automatic process timer which turns off your evaporator at a pre-prograed time and removes evaporator flasks from bath on motor lift models - Upgrade your Hei-VAP Advantage to a Hei-VAP Precision: Upgrade-KIT Advantage Precision - ML; Upgrade-KIT Advantage Precision - HL Description Glassware set G Angled condenser, Manual lift G Angled condenser, Manual lift G Vertical condenser, Manual lift G Vertical condenser, Manual lift G Condensate trap, Manual lift G Condensate trap, Manual lift G6 Vertical condenser for reflux distillation, Manual lift G6 Vertical condenser for reflux distillation, Manual lift G Angled condenser, Motor lift G Angled condenser, Motor lift G Vertical condenser, Motor lift G Vertical condenser, Motor lift G Condensate trap, Motor lift G Condensate trap, Motor lift G6 Vertical condenser for reflux distillation, Motor lift G6 Vertical condenser for reflux distillation, Motor lift standard coated standard coated standard coated standard coated standard coated standard coated standard coated standard coated

48 6. Distillation, Separation, Filtration Distillation/Rotary evaporators GENERAL CATALOGUE EDITION 7 Hei-VAP Precision Intelligent Evaporation Heidolph - Includes all standard Hei-VAP features for safety, ease of use and reduced cost of ownership - Available in hand lift or motor lift configurations - Experience the advantages of our large." color graphic display which features all parameters, integrated vacuum controller and includes programs for automated distillations - Make your life easier by utilizing the integrated software support which leads you through the capabilities of the evaporator - For data management Hei-VAP precision models feature a USB interface - Save time by configurating the unit; all connected components and periphery devices will be recognized by the evaporator which eliminates the need to configure the unit manually - Now you can manage even the most coon applications easily and prevent foaming, excessive bubbling or bumping - Save time with your individualized pre-prograed parameter settings for your 0 most coon applications used on a daily basis by saving them as a ramp in Favorites section. Each ramp offers 0 separate steps for demanding applications - Apply an individual name for those ramps to avoid a mix-up - Experience the advantages to the automatic process timer which turns off your evaporator at a pre-prograed time by raising the flask on motor lift models and releasing vacuum - Control your process individually by pre-prograing vacuum gradients - Hei-VAP Precision models feature a built-in vacuum controller as standard Programs facilitate process control Reduce your process times significantly by using these three programs for automated distillation. SETpressure Program for solvent separations. This program holds a pre-set vacuum constant. During the evacuation you have the full flexibility to choose any other level of vacuum by the press of a button. AUTOeasy Supports the automatic pressure control for solvent separations. The pressure level for the first boiling point is found automatically. This program can be used with all Heidolph glassware assemblies and does not require any accessories. AUTOaccurate Supports very precise automatic pressure control for solvent separations. This program works similar to AUTOeasy but in addition is able to identify multiple boiling points automatically by reducing vacuum accordingly. Also the AUTOaccurate program delivers the finest and most precise vacuum control. To take advantage of this program the optional AUTOaccurate-sensor is required. Also this program can not be used on Heidolph G and G glassware assemblies. Leading parameter of this program is the vapor temperature (AUTOaccurate is a combination of the previous programs Tauto and Pauto). Reduce your process times via automated distillation programs. Description Glassware set G Diagonal condenser, Hand lift G Diagonal condenser, Hand lift G Vertical condenser, Hand lift G Vertical condenser, Hand lift G Condensate trap, Hand lift G Condensate trap, Hand lift G6 Vertical condenser for reflux distillation, Hand lift G6 Vertical condenser for reflux distillation, Hand lift G Diagonal condenser, Motor lift G Diagonal condenser, Motor lift G Vertical condenser, Motor lift G Vertical condenser, Motor lift G Condensate trap, Motor lift G Condensate trap, Motor lift G6 Vertical condenser for reflux distillation, Motor lift G6 Vertical condenser for reflux distillation, Motor lift standard coated standard coated standard coated standard coated standard coated standard coated standard coated standard coated

49 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Distillation/Rotary evaporators Accessories for Rotary Evaporators Hei-VAP Series Heidolph Description Guard hood for evaporating flasks Guard shield for attaching to bath Boiling temperature sensor Temperature sensor for controller function AUTOaccurate Vacuum valve Heating bath fluid, L Tube set, m vacuum tube and 6m water tube Manual vacuum controller Upgrade-Kit advantage precision motor lift Upgrade-Kit advantage precision manual lift Spare PTFE vacuum seal Spare clamping sleeve Switchbox, connects up to rotary evaporators to one pump and control vacuum individually Chiller Rotacool High cooling capacity; minimal bench spare - The only chiller designed specifically for rotary evaporators - Minimal bench space due to unique L-shape design - Long-lasting service life - Footprint of chiller (L x W x H): 70 x 80 x - Provides space of (L x W): 70 x 0 for evaporator - Temperature range: -0 C to +0 C - Small quantity of circulating coolant required due to innovative technology - Precise temperature control of ±0. C - Display for setting temperature and reading out actual temperature Heidolph Rotacool mini Ideal for routine applications - Chiller for all bench top evaporators - Small footprint of chiller (L x W x H): x x 00 - Cooling temperature: 7 C (not adjustable) - Cooling capacity at 7 C, 70W - No digital display RotaChill The affordable model - Temperature range: -0 C to +00 C - Temperature control: ±0. C - Footprint of chiller: 0 x x 70 - No digital display Type Rotacool Rotacool mini RotaChill

50 6. Distillation, Separation, Filtration Distillation/Rotary evaporators GENERAL CATALOGUE EDITION 7 Bladder for rotary evaporators Football bladder Type Bladder for rotary evaporators 9. Large Scale Evaporator LR 0 series Intelligent Evaporation Heidolph Your advantages - A guard hood consisting of a metal frame and safety glass, covers the bath completely while providing clear visible monitoring - Features water level regulation system to prevent water from spilling over and potential flooding your lab - Unique integrated evaporating flask support system allows for "one person operation" to remove the flask in just moments - A temperature sensor powers off the bath in case of any uncontrolled heat-up event. In case of over pressure or glassware breakage the unit powers off entirely - No hassle or safety concerns due to low fluid levels: self-filling water bath takes the worry out of running dry - Automatic models allow for continuous unattended operation overnight and weekend applications to work off large quantities, great alternative to L or 00L evaporator - Receiver cassettes guard against glassware breakage while providing a self standing support - Excellent user safety with high impact transparent PMMA door guard glassware and receiving cassettes Type i ii iii iv LR 0 compact R LR 0 compact RC LR 0 compact A LR 0 compact AC LR 0 compact A LR 0 compact AC LR 0 safety R LR 0 safety RC LR 0 safety A LR 0 safety AC LR 0 safety A LR 0 safety AC LR 0 compact R shorty LR 0 compact R shorty LR 0 compact RC shorty LR 0 compact R shorty LR 0 control economy R shorty* LR 0 control safety R shorty* LR 0 control economy RC shorty* LR 0 control safety RC shorty* i = upward condenser, ii = downward condenser, iii = expansion vessel, iv = receiving flask All variants, upon request, are available with an oil bath instead of a water bath. * Oil bath

51 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Distillation/Rotary evaporators Laborota 0 automatic Automated hr Distillation: Heidolph Large scale evaporator designed for unattended use. The required solvent is automatically refilled and condensate continuously drained off. The automatic water bath refill system along with an additional control panel for filling and electronics allow for use over an extended period of time. - Designed for hr continuous use - For continuous operation overnight and at the weekend - Affordable alternative to coon L and 00L evaporators - Particularly suitable for solvent processing - Reduces exposure to solvent vapour and spills Type Safety version, water bath, glassware kit A Safety version, oil bath, glassware kit A Safety version, water bath, glassware kit A Safety version, oil bath, glassware kit A Economy version, water bath, glassware kit A Economy version, oil bath, glassware kit A Economy version, water bath, glassware kit A Economy version, oil bath, glassware kit A

52 6. Distillation, Separation, Filtration Distillation/Rotary evaporators GENERAL CATALOGUE EDITION 7 Rotary evaporators RV 0 basic The RV 0 basic rotary evaporator with integrated HB 0 heating bath is the base model of IKA's new rotary evaporator line. The RV 0 basic comes as standard with vertical glassware, either coated or uncoated. IKA Analog heating bath with adjustable safety circuit, stand alone operation is possible,pivoting safety hood as an accessory - Safe and simple operation by means of ergonomically shaped control unit in the front - Motorized lift (stroke 0) with safety stop function, if the power cuts out the evaporator flask is automatically lifted out of the heating bath - Adjustable end position recognition to protect the glass from breaking - Speed range from 0rpm to 80rpm - Smooth start from 00rpm - Digital speed display - Rotates clockwise and counterclockwise in interval operation for the drying process - Timer function for time lapse control - Water/oil heating bath with integrated carrying handles for safe handling - Heats up quickly because of optimised bath volumes - Push-off mechanism to loosen tightly fitting flasks - Suitable for DIN EN 697- (Asphalt test for hot asphalt) - year warranty after registration RV 0 basic standard package includes: -Drive - Heating bath - Vertical glassware, coated and uncoated (L receiving and distilling flask) - Vapor tube NS - Vacuum seal - Woulff bottle Specifications: Drive: Motor rating input: W Speed range: 0 to 80 rpm Speed display: digital Head angle adjustable: 0 to Stroke displacement: 0, motorised Setting of lower end stop: 60, contact-free Heating bath: Temperature range: Ambient up to 80 C Heating power:.00w Type Description RV 0 basic V RV 0 basic V-C RV 0.70 RV with heating bath HB 0 basic and vertical glassware, RV 0. with heating bath HB 0 basic and vertical glassware, coated RV 0.0 Vapor tube made of borosilicate glass, NS Lip-seal from a PTFE compound with a built-in stainless steel spring We can supply this manufactorer s whole product range! 60

53 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Distillation/Rotary evaporators Rotary evaporators RV 0 digital IKA s RV 0 digital is a combination of performance, reliability and versatility and offers IKA users the precision of an accurate digitally controlled heating bath. The perfectly coordinated data transfer between the heating bath and the drive unit as well as the option of remote operation from a PC ensure results that can be reproduced any time. Same properties as RV 0 basic, with the following additional functions: - Digital water/oil heating bath with integrated carrying handles, stand alone operation is possible - Temperature control of the heating bath by a micro controller - Digital temperature display - Infrared interface for data transfer from the heating bath to the drive unit - RS interface for PC remote operation with labworldsoft - Timer function shuts off heating bath at completion of timer sequence - year warranty after registration 6. 8 Type Description RV 0 digital V RV 0 digital V-C RV 0 digital FLEX with heating bath HB 0 digital and vertical glassware RV 0. with heating bath HB 0 digital and vertical glassware, coated RV 0.0 with heating bath HB 0 digital, incl. Woulff bottle, glassware - please order separately Rotary evaporator RV 0 contol The RV 0 control is the flagship of the new rotary evaporator series by IKA. It offers IKA all the functions of the RV 0 digital. But the IKA RV 0 control goes one step further. Like the RV 0 digital, it can be precisely controlled via the RS interface for remote PC operation with IKA s labworldsoft and is thus ideal for automatic operation, but thats not all; the control functions also enable completely automatic distillation both for volumebased processes and full drying depending on the area of application. The expandable solvent library also allows you to incorporate new processes. Same properties as RV 0 digital, with the following additional functions: Integrated vacuum controller with central display for automatic distilling and ramp prograing - Integrated solvent library, which can be extended by the user - Distillation specific parameters stored for standard distillations - Automatic transfer of measurements and distillation type with one key press - Prograable volume controlled distillation - Color graphic display for safe and comfortable operation - Display of distillation curves - Multiple languages - Automatic ventilation at the end of each test - Cooling water switched off automatically at the end of the test - Integrated cooling water monitoring - Heating bath safety management; automatic heating bath monitoring with distillation stop in case of temperature errors - Heating bath switched off automatically at the end of the test - USB interface - years warranty after registration - New: Now RV 0.00 Magnetic valve included in delivery Type Description RV 0 contol V RV 0 contol V-C RV 0 contol FLEX with heating bath HB 0 control, vertical glassware RV 0. and RV 0.00 Magnetic valve laboratory vacuum with heating bath HB 0 control, vertical glassware, coated RV 0.0 and RV 0.00 Magnetic valve laboratory vacuum with heating bath HB 0 control, incl. Woulff bottle and RV 0.00 Magnetic valve laboratory vacuum, glassware - please order separately

54 6. Distillation, Separation, Filtration Separating, centrifuging/microcentrifuges GENERAL CATALOGUE EDITION 7 Mini-Centrifuge Sprout - Easy-to-use, dual start/stop functions-control starting and stopping with power button or by opening and closing the lid - Rubber footplate keeps unit stable and deadens vibrations - Smooth, durable ABS finish is easy to clean Heathrow Scientific This compact mini-centrifuge is ideal for quick spin-downs from tube walls and caps. Use to microfilter cell separations and HPLC samples. Most spins last around 0 seconds, so Sprout is designed for easy repeat opening. Ergonomically designed lid allows one-handed use. Operation is extremely simple - load tubes, close lid, and press on/off button. For repeated spins, simply open/close lid to operate mini-centrifuge. As a safety feature, the motor will not operate if the lid is open. This personal centrifuge uses minimal benchtop space. Remove power supply lead for compact storage. Includes three rotors: two, glass-filled, polycarbonate, microtube rotors and one polycarbonate strip tube rotor. Unit is ETL, cetl, and CE marked. Sprout includes: - Three interchangeable rotors to cover all applications. Sprout comes with the circular, one- (.ml) tube rotor attached. Use the allen key included to easily switch to the strip tube rotor or circular, dual- (.ml and 0.ml) tube rotor. - Storage case: Safely store extra rotors and adapters when not in use. Padded foam case can be left on benchtop or stored in drawer. Keeps rotors safe while conveniently on hand. - Tube rack: Move.0ml,.ml, 0.ml, 0.ml, and 0.ml microcentrifuge tubes from station to station. Keep tubes organized in hand-held foam rack. Specifications Maximum Speed: Maximum RCF: Tubes Accoodated Circular, one- rotor: Circular, dual- rotor: Strip rotor: Dimensions: 6000rpm 000xg six.- and.0ml tubes or use with adapters to spin six 0.- and 0.ml tubes three 0.ml and 0.ml tubes and three.ml and.0ml tubes two 8 x 0.ml PCR tube strips or 6 x individual 0.ml PCR tubes x 8 x 0 Description Mini-Centrifuge Sprout We can supply this manufactorer s whole product range! 606

55 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Separating, centrifuging/microcentrifuges Mini Centrifuge MyFuge Unlike traditional mini centrifuges, the new MyFuge eliminates the need to change rotors when switching between microtubes and PCR strips. The included, unique COMBI-Rotor is all that is required for running microtubes and PCR strips simultaneously. - COMBI-Rotor, for tubes and strips - Twice the capacity of traditional mini centrifuges - Near silent operation - Starts & stops with opening/closing of the lid Specifications Speed: 0rpm/000xg Capacity: x.ml /.0ml tubes x 0. ml PCR tubes x PCR strips (8 x 0.ml) Dimensions (WxDxH): 0 x 00 x Weight: kg Electrical: 00 to 0V /60Hz Benchmark Scientific Type Description C0E C0 C008-A-6 C008-A-6 Mini Centrifuge MyFuge, EU-plug Mini Centrifuge MyFuge, US-plug Adapters, 0.ml Adapters, 0.ml Mini Centrifuge Spectrafuge and Slide Spinner Spektrafuge Mini Centrifuge for tubes - Ideal for quick spin downs and microfiltration - For microcentifuge tubes and strips - convient on/off switch -smoke grey lid Labnet Slide Spinner for slides - for quick drying of slides, e.g. microarray slides - dries slides in less than 0 seconds - removeable cassettes conveniently catch all liquid (incl. in delivery) - easy cleaning or changing of removable cassettes Specifications Spectrafuge Mini: Maximum speed/rcf: 6000rpm/8xg Maximum capacity: x 0.ml strips or 6 x./.0ml Dimensions (WxDxH): x x 7 Weight: kg Supply requirements: 0V Hz or 0V 60Hz Slide Spinner: Maximum speed/rcf 800rpm Maximum capacity standard slides Dimensions (WxDxH) x x 7 Weight kg Electrical 0V Hz or 0V 60Hz Type 6. 9 Mini centrifuge Slide Spinner with slide drying cassettes Extra cassettes for Slide Spinner Centrifuge/vortexer, Combi-spin PCV-00 Combined centrifuge/vortex mixer for microtubes and 0.ml strips. For independent Grant centrifuge and vortex mixing, or mixing of an individual tube concurrently with spinning of multiple tubes. The vortex cup, located at the top of the central shaft, emerges through an opening in the closed lid. In spin-mix-spin applications, the Combi-spin can be used with reagent volumes down to approximately µl. - max RCF(bottom of tubes) g-force 700g - interchangeable rotors for.0ml,.ml, 0.ml, 0.ml microtube combinations and 0.ml stripes. - fixed speed: 800rpm - continuous operation or short spin Type PCV

56 6. Distillation, Separation, Filtration Separating, centrifuging/microcentrifuges GENERAL CATALOGUE EDITION 7 Centrifuge Multi-spin PCV-000 Combined centrifuge/vortex mixer for microtubes and 0.ml strips. For independent centrifuge and vortex mixing operations, or a prograable sequence of spin and mix phases of multiple tubes. - interchangeable rotors for.0ml,.ml, 0.ml, 0.ml microtube combinations and 0.ml strips. - spin speed: 000rpm to 0rpm - timed spin: sec to 99 min - vortex mixing speed: three stage adjustment - timed vortex mixing: to 0 sec - max RCF(bottom of tubes) g-force 800g Grant Type PCV Accessories for Centrifuges Combi-spin PCV- 00 and Multi-spin PCV-000 Type Description Grant PR-0 PR-0-0 PSR-6 Rotor for 8 x./.0ml plus 8 x 0.ml tubes Rotor for 6 x./.0ml plus 6 x 0.ml plus 6 x 0.ml tubes Rotor for x 8-well 0.ml microtube strips MiniSpin and MiniSpin Plus personal centrifuges Features: - Extremely compact and small footprint - Especially quiet due to its carefully balanced drive - Maintenance-free motor - Clear digital display - Minimal sample heating (after 0min. at max. speed only C max. ) - Separate short-spin button - Automatic lid opening - Integral power supply unit - Capacity: x./ml containers - Autoclaveable rotor ( C, 0min.) - Startup/slowdown time less than secs. (to/from max. speed). Eppendorf AG Additional features of MiniSpin - Includes standard anodised aluminium rotor - Max. speed: 00rpm, max. rcf: 00 xg - Timer can be set for up to 0 mins. Additional features of MiniSpin Plus - Includes premium "Black Line" aluminium rotor - Max. speed: 0rpm, max. rcf: 00 xg - Speed/rcf display switch - Timer can be set for up to 99 mins. - Permanent centrifuging option Type MiniSpin MiniSpin plus Dimensions Weight Power (W x D x H) kg W x 0 x x 0 x

57 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Separating, centrifuging/microcentrifuges Microlitre centrifuges Espresso Introducing Espresso - the personal microcentrifuge that takes productivity and Thermo Scientific ease-of-use to a whole new level. Compact and stylishly designed, the Espresso microcentrifuge lets you perform all your standard runs with a minimum of adjustments, and offers outstanding performance to handle a wide range of applications across pharmaceutical, biotechnology and academic research. User friendly: - Rotors and tubes are inserted and removed with minimal effort. - A large LED display simplifies viewing of parameters - Setting parameters is also fast and simple using a single knob-no need to bother with toggling arrow keys or imprecise analog controls - Espresso is a snap to clean: its plastic rotor is fully autoclavable and non-corroding, and the unit features a brushless motor that offers years of maintenance-free operation Maximum productivity: - Espresso offers outstanding performance in a small, versatile package. Operating at.0 x g, it can hold micro tubes from 0. to.0 ml and supports smaller volumes with adapters - Espresso excels in a wide range of applications including nucleic acid purification, PCR cleanup, plasmid mini-prep, protein processing and forensics - Its fast spin-up/spindown offers significant time savings that increases productivity Compact and quiet: - With its 76. square-inch footprint, Espresso delivers consistent results without taking center stage on your benchtop - its exceptionally quiet so you can conduct your research all day long without distraction Type Max. Max. Dimensions rcf speed (W x D x H) x g rpm Espresso x 00 x 9.9 Accessories for microcentrifuge Espresso Thermo Scientific Description Adapter 0. (D= 8) Adapter 0. (D= 6) Accessories for MiniSpin and MiniSpin Plus personal centrifuges Eppendorf AG Type Rotor F--6--PCR incl. lid Lid, stainless steel for F--6--PCR Adapter for 0.ml microcentrifuge tubes and 0.6ml microtainers Adapter for 0.ml microcentrifuge tubes Adapter for 0.ml PCR-vessels

58 6. Distillation, Separation, Filtration Separating, centrifuging/microcentrifuges GENERAL CATALOGUE EDITION 7 Microcentrifuge Spectrafuge D The Spectrafuge D combines innovations such as a unique, easy access rotor, Labnet exclusive multi-flow air cooling system and high performance drive with a digital microprocessor that precisely regulates operation. Parameters are selected with two "smart" knobs and values are shown on large, easy to read, LED displays. Speed can be set and displayed in rpm or g-force while runs may be timed, continuous or momentary. The unique design of the -place rotor allows easy access to the tops of the tubes. An optional StripSpin adapter fits onto the rotor for spinning 0.ml tubes and strips. A powerful, brushless motor quickly accelerates the rotor to set speed. Air enters the centrifuge through vents on the back of the housing and it is circulated in multiple directions to maximize cooling. The result is a cool running microcentrifuge that keeps samples close to ambient temperature, even during extended runs at maximum speed. For samples that require below ambient temperatures, the Spectrafuge D may be used in a cold room. Specifications: Maximum speed/rcf:.00rpm/6.00xg Maximum capacity: x.ml/.0ml Timer: to 0min or continuos "Quick" button for momentary operation Ambient operating range: C to C Dimensions (WxDxH): x 9 x 6 Weight: 8.kg Supply requirements: 0V Hz or 0V 60Hz Type Spectrafuge D Microlitre centrifuge Microlitre centrifuge for microtubes up to.0ml. Features: - Brushless, induction motor - Steplessly adjustable speed range: 000rpm to 000rpm rpm - Timer pre-selection from min. to 0 min. with "continuous run" facility - "quick" pulse button for short time runs - CE-marked - Constructed to IEC 00 requirements Specifications Max. capacity: 8./.0ml Max. speed: 000rpm Max. rcf.: 996 g Dimensions (W x H xd): Weight:.kg Labnet Description microlitre centrifuge complete with accessories We can supply this manufactorer s whole product range! 60

59 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Separating, centrifuging/microcentrifuges Microcentrifuge Prism/Prism R Operation can be timed, continuous or momentary, using the quick button. Vibration Labnet free operation is ensured by an isolation system. In the event of a significant imbalance, operation of the centrifuge is automatically stopped. Deceleration at the end of a run is very quick, but will not disrupt samples. Supplied with a uniquely designed x.ml/.0ml rotor that allows easy access to the tops of the sample tubes. Individual tube slots in the solid aluminum rotor support tubes along their length and contain the sample in the event of tube failure. The rotor is seated on a tapered shaft which facilitates easy removal for cleaning and autoclaving. Adapters for smaller tubes and PCR strips -please oder separately. Specifications Prism/Prisma R Speed range: 0 to.000rpm/0 to.0rpm Max. RCF:.00xg/7.xg Max. capacity: x./.0ml Timer: 0. to 99 minutes or continuous "Quick" button for momentary operation Tempearatur range: ---/-0 to 0 C Dimensions (WxDxH): x x 9cm/7.7 x x.7cm Weight: 9.6kg/0kg Power supply: 0V, Hz or 0V, 60Hz Description Prism ambient microcentrifuge with place rotor Prism R ambient microcentrifuge with place rotor and cooling StripSpin adapter for 0.ml tubes and strips Individual adapter for 0./0.6ml tubes Individual adapter for 0./0.ml tubes Individual adapter for 0.ml thermal cycling tubes Mini Plate Spinner MPS quickly spin down droplets and condensation - use before and after thermal cycling to increase PCR yield - accepts skirted, non-skirted and all standard PCR plates - less than ¼ x the of most plate centrifuges Specifications Capacity: PCR Plates Rotor Speed: 0rpm Centifugal force: 0xg Rotor: Fixed vertically Dimensions (WxDxH): 8 x x 6 Weight: kg Supply requirements: 0V /60Hz Labnet Type MPS

60 6. Distillation, Separation, Filtration Separating, centrifuging/microcentrifuges GENERAL CATALOGUE EDITION 7 Microcentrifuge 8/8 R Microcentrifuge 8-8 place rotor for./.0ml tubes - Lid opens automatically after spinning - Very small profile, minimal bench space required - Remarkably silent, even without rotor lid - Standard, certified aerosol-tight rotor - Convenient Eppendorf two-dial operation - rpm/rcf converter - Short-spin Microcentrifuge 8 R, with additional features: - The patented compressor technology reduces vibration to a minimum - Temperature range: 0 C to +0 C - Low access height of 6cm - Keeps a constant C at max. speed - Fast Temp for rapid pre-cooling of the centrifuge Eppendorf AG Specifications Max. rcf: Max. speed: Capacity: Warm-up time to max. speed: Slow-down from max. speed: Noise level: Supply requirements: 8/8 R 6 87xg 000rpm 8 x./.0ml 6s/s 8s/s <db(a)/<6db(a) 0V, /60Hz Type Description Dimensions Weight Power (W x D x H) kg W 8 8 R with cooling 0 x 00 x 0 00 x 60 x Rotor for microcentrifuge 8/8 R Includes aerosol-tight rotor cover. 8-place rotor. Eppendorf AG Type Rotor F--8- incl. aerosoltight rotor lid Microcentrifuge / R Microcentrifuge - -place-centrifuge - aerosol tight rotors - different rotors - very quiet in operation, even without rotor lid - Choice of analogue dial or membrane keypad control - adjustable soft ramp acceleration Microcentrifuge R, additional features: - The patented compressor technology reduces vibration to a minimum - Temperature range: -9 C to +0 C - Small footprint and low access height of 6cm - Keeps a constant C at max. speed - Fast Temp for rapid pre-cooling of the centrifuge, for example, from about C to C in 8 mins. Eppendorf AG Specifications Max. rcf: Max. speed: Capacity: Warm-up time to max. speed: Slow-down from max. speed: Noise level: Supply requirements: / R 08 x g/0 x g.680rpm/.000rpm x./ml sec. 6 sec. db(a)/ db(a) 0V /60Hz Type Description Dimensions Weight Power (W x D x H) kg W R R R R with control knobs, with rotor with foil keypad, with rotor with control knobs, without rotor with foil keypad, without rotor with control knobs, with rotor, aerosol-tight with foil keypad, with rotor, aerosol-tight with control knobs, without rotor with foil keypad, without rotor 6 x 0 x 7 6 x 0 x 7 6 x 0 x 7 6 x 0 x 7 x 80 x 60 x 80 x 60 x 80 x 60 x 80 x

61 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Separating, centrifuging/microcentrifuges Rotors for Microcentrifuge / R Including Rotor lid. FA--- Certified aerosol-tight rotor for x.ml /.0ml microcentrifuge tubes comes standard (max. 0.8xg). Perfect for standard applications and centrifugation of biohazardous or radioactive samples. Aerosol-tight rotors are easily identified by a red lid screw. FA----Special Certified aerosol-tight rotor for x.ml /.0ml tubes with special PTFE-coating for improved chemical resistance (e.g., when working with phenol or chloroform) and easy cleaning (max. 0.8xg). Aerosol-tight rotors are easily identified by a red lid screw. F--8--Kit Innovative 8-place rotor for miniprep spin columns and./.0 ml tubes. Designed with an extra high rim to support open tube lids during centrifugation, no more torn off lids (max. 8.xg). F----PCR Rotor for x 8-tube PCR strips or x 0.ml PCR tubes quickly knocks down liquids and properly supports thin-walled PCR tubes (max. 8.6 xg) Type FA --* FA ---Special** F -8--Kit F ---PCR Adapter for 0.ml PCR tubes in fixed angle rotor Adapter for 0.ml PCR tubes in fixed angle rotor Adapter for 0.ml PCR tubes in fixed angle rotor/b-d-microtainer * aerosol-tight **aerosol-tight, PTFE-coated Microcentrifuge 0/0 R Microcentrifuge 0 - Choice of 8 different rotors, e.g. MTP rotor, Falcon rotor for max. versatility - 0 place centrifuge for./.0ml micro test tubes - Unique 0.0xg - Automatic rotor recognition - Stores up to routine programs - Menu guided operation in different languages - Automatic lid opening following application sequence (only 0) Eppendorf AG Microcentrifuge 0 R, additional features: - Temp. range: - to +0 C - + C at max. speed with all rotors - Continues cooling after the centrifugation process - Fast Temp for achieving required temperature in shortest possible time - Fast Temp for having the centrifuge refrigerated and ready-for-use at your desired pre-set time Specifications Max. rcf: Max. speed: Capacity: Acceleration time to max. speed: Braking period from max. speed: Noise level: Supply requirements: 0/0 R 00 xg 70rpm 0 x./.0ml or 6 x ml < sec. < sec. <67 db(a)/<6 db(a) 0V, /60Hz Type Description Dimensions Weight Power (W x D x H) kg W R 0 R 0 R 0 R without rotor, with membrane keypad without rotor, with dial setting with rotor FA--0- with rotor FA--0-, with dial setting without rotor, with membrane keypad without rotor, with dial setting with rotor FA--0-, with membrane keypad with rotor FA--0-, with dial setting 0 x 0 x 0 x 0 x 0 x 0 x 0 x 0 x 80 x 60 x x 60 x x 60 x x 60 x

62 6. Distillation, Separation, Filtration Separating, centrifuging/microcentrifuges GENERAL CATALOGUE EDITION Rotors for microcentrifuge 0/0 R Include rotor cover. Eppendorf AG FA--0- Standard rotor, 0 x tubes./.0ml, max. 087xg, speed 000rpm F--0- Fixed angle rotor, 0 x tubes./.0ml, max. 087xg, speed 000rpm FA----HS High speed rotor, x Eppendorf.ml Safe-Lock tubes and 80X tubes, max. 00xg, speed 70rpm FA----Kit Kit rotor x spin columns, nucleic acid cleaning kits, tubes up to.0ml, max. xg, speed 00rpm F--6--PCR PCR strip rotor, 8 x /8 PCR strips or 6 x 0.ml PCR tubes, max. xg, speed 800rpm F--8-7-Cryo CryoTube rotor, 8 x CryoTubes.0/.0ml, max. 80xg, speed 80rpm F--6-0 Falcon rotor, 6 x ml or 6 x ml Falcon tubes, max. 797xg, speed 780rpm A--MTP MTP rotor for PCR plates, CombiSlide adapter, max. loading height 9, max. 0xg, speed 680rpm Type F--0-* FA--0-** FA----HS** FA----Kit** F--8-7-Cryo, incl. Adapter F--6--PCR, incl. Adapter F--6-0, incl. Adapter A--MTP*** * PTFE-coated **aerosol-tight, PTFE-coated ***incl. MPT-supports Microcentrifuge 0/0 R rotor accessories Eppendorf AG Description Adapter for F--6--PCR Adapter for x ml Falcon-type tubes MPT spare supports We can supply this manufactorer s whole product range! 6

63 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Separating, centrifuging/microcentrifuges Refrigerated microlitre centrifuge Z 6 MK The Z 6 MK refrigerated microcentrifuge sets a new standard in this centrifuge class. Hermle Capable of centrifuging up to x./.0ml, it features a versatile control panel allowing for storage of up to 99 runs. The powerful refrigeration system keeps samples at temperatures as low as C during a continious run at 0000xg. Specifications: - Maintenance-free induction drive - Microprocessor with large LCD Display - Motor driven lid lock - Active imbalance-identification and -cut off - Standstill cooling - Audible signal at the end of each run - Rapid acceleration and deceleration (see rotor data) - Lowest sample temperature C at 0000xg - Noise level < 6 dba at 0000xg - Extremely compact with a space saving footprint - Quick access to samples with a snap on lid - Aerosol tight rotor option - Manufactured according to international safety regulations, i.e. IEC 00 - Distinct control panel Technical data Max. speed: Max. RCF: Max. Volume: Speed range: Running time: 00rpm 80xg x./.0ml 00 to 00rpm 9 min sec/0 sec increments 99 h 9 min/ min increments Description Refrigerated microlitre centrifuge Z 6 MK Refrigerated microlitre centrifuge Z 6 MK incl. angle rotor Dimensions Weight Rating (W x D x H) kg W 80 x x x x Accessories for refrigerated Microlitre centrifuge Z 6 MK Hermle Description Angle rotor x./.0ml Angle rotor x./.0ml, hermetically sealed Angle rotor 0 x./.0ml, hermetically sealed Adapter sets for 0. and 0.ml reaction vessels Adapter sets for 0.ml reaction vessels Angle rotor for x 8 PCR Stripes

64 6. Distillation, Separation, Filtration Separating, centrifuging/microcentrifuges GENERAL CATALOGUE EDITION 7 Refrigerated high speed centrifuge Z HK With a wide range of accessories, the Z HK high speed centrifuge is applicable in a Hermle wide variety of research settings. In spite of the remarkably small footprint, the Z HK features a powerful refrigeration system capable of maintaining cool sample temperatures even at maximum speed. Specifications: - Maintenance-free induction drive - Microprocessor with large LCD display - Motor driven lid lock - Automatic rotor identifi cation system with over speed protection iediately upon rotor installation - Active imbalance identification and cut off rotor specific - Imbalance tolerant drive - CFC-free refrigeration system - A large variety of rotors and accessories - Manufactured according to international safety regulations, i.e. IEC 00 - Audible signal at the end of each run with several melody options - Quick and easy rotor exchange - Noise level under 60dBA at max. speed - Distinct control panel Technical data Max. speed: Max. RCF: Max. Volume: Speed range: Running time: 0000rpm 80 xg x 00ml 00 to 0000rpm 9 min sec./0 sec. increments 99 h 9 min/ min increments Description Dimensions Weight Rating (W x D x H) kg W Refrigerated High Speed Centrifuge Z HK 00 x 700 x Accessories for refrigerated High Speed Centrifuge Z HK Hermle Description Angle rotor for max. 0 x 0ml Angle rotor for max. x./.0ml For further accessories see Z 6/Z6K Microlitre centrifuge MIKRO 0 Compact, powerful microlitre centrifuge that requires little space. With its -place rotor Hettich with aerosol-tight, phenol-resistant and autoclavable lid sedimentation is fast and safe. With microprocessor control, impulse key for short centrifuging, one-hand lid locking and lid holding. Easy entry of the parameters via foil keypad. Actual values are displayed during centrifugation. Specifications Max. rcf: Max. speed: Max. capacity: 807xg 000rpm x 0. to ml Type Description Dimensions Weight (W x D x H) kg MIKRO 0 without rotor x 9 x 99 approx Angle rotor for microlitre centrifuge MIKRO 0 With lid, bio-containment, autoclavable and phenol-resistant. Hettich Type Description for x. to ml Additional accessories on request. 66

65 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Separating, centrifuging/microcentrifuges Microlitre centrifuges MIKRO 00/00 R Refrigerated and non-refrigerated, high-performance microlitre centrifuges. Five Hettich exchangeable rotors are available. With frequency drive, microprocessor control with prograable memories, impulse key for short centrifuging, powered lid locking and "open lid" key. Easy entry of the parameters via select keys and a twist knob. A switch key enables entry/display of rpm (speed) or rcf, as required. Actual values are displayed during centrifugation. The refrigerated MIKRO 00 R allows chamber temperature control between -0 to +0 C. With the Fast Cool function it refrigerates to + C in 0 to minutes. The "stand-by" mode maintains the set temperature between runs. Specifications Max. rcf: Max. speed: Max. capacity: 8xg 00rpm 0 x 0. to ml Type Description Dimensions (W x D x H) MIKRO 00 without rotor 7 x x 60 MIKRO 00 R refrigerated, without rotor 8 x 7 x 60 Weight kg approx.. approx Accessories for microlitre centrifuges MIKRO 00/00 R Hettich Type Description 7-A 0-B 6-B 8-A Angle rotor for 0 x 0. to ml microtubes with standard lid Angle rotor for 0 x 0.ml microtubes with standard lid Angle rotor for 0 x.8ml cryo tubes with standard lid Angle rotor for x 0.ml or x 8 PCR strips Lid with bio-containment, autoclavable, for angle rotors -B, 0-B, 6-B, 7-A Lid with bio-containment, autoclavable and phenol-resistant, for angle rotors -B, 0-B, 6-B, 7-A Additional accessories on request

66 6. Distillation, Separation, Filtration Separating, centrifuging/microcentrifuges-benchtop centrifuges GENERAL CATALOGUE EDITION 7 Microlitre centrifuges MIKRO 0/0 R Microlitre centrifuges with outstanding performance characteristics. Model MIKRO Hettich 0 accoodates 9 alternative rotors, the refrigerated version MIKRO 0 R takes alternative rotors. The MIKRO 0/0 R feature frequency drive, microprocessor control and impulse key for short period centrifuging. Extremely short acceleration and deceleration times, easy entry of the parameters via a foil keypad and digital display. As necessary, a switch key enables entry/display of rpm (speed) or rcf. 0 complete running prograes can be stored and recalled. The refrigerated MIKRO 0 R can control chamber temperature between -0 and +0 C. 9.9 Specifications Max. rcf: Max. speed: Max. capacity: xg 8000rpm 60 x 0. to ml or 6 x ml 9.9 Type Description Dimensions (W x D x H) MIKRO 0 without rotor 0 x 0 x MIKRO 0 R refrigerated, without rotor 0 x 6 x Weight kg approx. approx Accessories for microlitre centrifuges MIKRO 0/0 R Hettich Type Description 8 9-A 89-A 8-L 9-A 6 -L 60 0 Angle rotor for x 0. to ml microtubes with lid Angle rotor for x 0. to ml microtubes with bio-containment lid Angle rotor for 0 x 0. to ml microtubes with bio-containment lid Angle rotor, -row for 8 x 0. to ml microtubes with bio-containment lid Angle rotor for 0 x.8ml cryo tubes with standard lid Drum rotor for 60 x 0. to ml microtubes with lid, without adapters Swing-out rotor for x 0. to ml microtubes with lid Angle rotor for 8 x 0.ml microtubes or 6 x 8 PCR strips Hematocrit rotor for capillaries with lid as evaluation disk Additional accessories on request Special-purpose centrifuge HAEMATOKRIT 0 Fast and reliable benchtop centrifuge for accoodating haematocrit capillaries per Hettich run. With microprocessor control, convenient twist lock, lid locking and holding, rotor imbalance cut-out and stop indication. Easy entry of speed and running time using the foil keypad. Display of the actual values during centrifugation. Specifications Max. rcf: Max. speed: Max. capacity: 6060xg 000rpm haematocrit capillaries Type Description Dimensions Weight (W x D x H) kg HAEMATOKRIT 0 without rotor 7 x 0 x 7 approx

67 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Separating, centrifuging/benchtop centrifuges Rotor for benchtop centrifuge HAEMATOKRIT 0 Hettich Type Description 076 Haematocrit rotor for capillaries with lid as evaluation disk Accessories for benchtop centrifuges ROTINA 0/0 R Hettich Type Description A Swing-out rotor for max. x 600ml or 6 microtitre plates without carriers Round carrier 600ml for swing-out rotor 7 Bio-containment lid for round carrier 7 Adapter for x ml tubes for round carrier 7 Adapter for x ml tubes for round carrier 7 Carrier for max. microtitre plates for swing-out rotor 7 Swing-out rotor for max. x ml without carriers Round carrier for max. ml for swing-out rotor 7 Lid with bio-containment for round carrier 9 Rectangular carrier for max. 00ml for swing-out rotor 7 Swing-out rotor for max. x 00ml without carriers Round carrier for max. 00ml for swing-out rotor 7 Lid for round carrier 0 Swing-out rotor for max. 8 x ml without carriers Angle rotor for 0 x 0. to ml microtubes with bio-containment lid Angle rotor for 8 x 0.ml or 6 x 8 PCR strips Angle rotor for max. x ml Angle rotor for max. 6 x 9ml with bio-containment lid Additional accessories available on request Compact centrifuge Z 06 A Compact centrifuge for physicians and clinical laboratories. Hermle The Z 06 A accepts up to x ml conical and round bottom tubes. For tubes with smaller dimensions we offer several adapters. For larger volumes we offer an angle rotor for 6 x ml conical and round bottom tubes. Specifications: - Microprocessor with LCD display - Electrical lid lock - Pre-selection of the rotor type - Active imbalance-identification and -cut off - Manufactured according to international safety regulations - Noise level under 60dBA at max. speed - A large variety of rotors and accessoires - Easy change of rotors - Distinct control panel Technical Data Max. volume: Max. speed: Max. RCF: Dimensions (W x H x D): Weight: x ml/6 x ml 6000rpm 80xg 8 x 6 x 7cm kg Description Compact centrifuge Z 06 A Compact centrifuge Z 06 A incl. angle rotor xml Dimensions Weight Rating (W x D x H) kg W 80 x 70 x x 70 x

68 6. Distillation, Separation, Filtration Separating, centrifuging/benchtop centrifuges Accessories for compact centrifuge Z 06 A GENERAL CATALOGUE EDITION 7 Hermle Description Angle rotor x ml Angle rotor 6 x ml Angle rotor 8 x./.0ml Swing out rotor 6 x ml Universal centrifuges Z 6/Z 6 K Universal laboratory centrifuge for medical laboratory, from the large volume ( x 00ml) to reaction vessels. Hermle 6 6. Both the table top centrifuge Z 6 and the refrigerated table top centrifuge Z 6 K offer a wide assortment of rotor options, making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high volume angled rotors is very simple and can take place in a matter of seconds. The Z 6 K includes the refrigeration system on the back side of the unit, optimised for the lab bench at only 0cm wide. Specifications: - Maintenance-free induction drive - Microprocessor with large LCD display - Motor driven lid lock - Automatic rotor identification system with over speed protection, iediately upon rotor insertion - Active imbalance-identification and -cut off (rotor specific) - Imbalance tolerant drive - CFC free refrigeration system (Z 6 K) - A large variety of rotors and accessories - Manufactured according to international safety regulations, i.e. IEC 00 - Audible signal at the end of each run with several melody options - Rotor exchange is easy to handle - Noise level under 60dBA at max. speed - Optimized airfl ow system keeps the samples cool (Z 6) - Distinct control panel Technical data Max. speed: Max. RCF: Max. volume: Speed range: Running time: 8000rpm xg x 00ml 00 to 8000rpm 9 min sec/0 sec increments 99 h 9 min/ min increments Description Universal centrifuges Z 6 Universal centrifuges Z 6 K Dimensions Weight Rating (W x D x H) kg W 00 x 80 x x 700 x

69 GENERAL CATALOGUE EDITION 7 Accessories for Universal Centrifuges Z 6/Z 6 K 6. Distillation, Separation, Filtration Separating, centrifuging/benchtop centrifuges Hermle Description Swing out Rotor, place Bucket x 00ml Bucket x ml Falcon Bucket x ml Falcon Bucket 0 x.ml Swing out Rotor, place Bucket x ml Falcon Bucket x ml Falcon Bucket hermetic for tube racks Tube racks x 00ml Tube racks x ml Falcon Tube racks x ml Falcon Tube racks 7 x to 7ml Tube racks x.ml Swing out rotor x Microtiterplates Angle rotor for max. x ml Angle rotor for max. 6 x ml Angle rotor for max. 6 x 8ml Angle rotor for max. x./.0ml Angle rotor for x 8 PCR Stripes Benchtop centrifuges EBA 0/EBA 0 S The practical and handy EBA 0 and EBA 0S are supplied with an 8-place angle rotor. Hettich Designed for small sample throughput, they are ideal for use in doctors' surgeries or in large laboratories as auxiliary equipment. With microprocessor control, impulse key for short centrifuging, one-hand lid locking and lid holding. Easy entry of the parameters time and speed (rpm) via foil keypad. Actual values are displayed during centrifugation. Various tubes (incl. glass tubes) can be centrifuged without an adapter. Adapters for additional blood collection tubes are available on request. Model EBA 0 S is supplied with adapters for x 7 Vacutainers (.6ml to ml). Specifications Max. rcf: EBA 0: EBA 0 S: Max. speed: EBA 0: EBA 0 S: Max. capacity: 6xg 6xg 6000rpm 8000rpm 8 x ml Type Description Dimensions (W x D x H) EBA 0 with angle rotor x 9 x 6 EBA 0 S with angle rotor x 9 x 6 Weight kg approx. approx

70 6. Distillation, Separation, Filtration Separating, centrifuging/benchtop centrifuges GENERAL CATALOGUE EDITION 7 Benchtop centrifuge EBA Compact, versatile and powerful benchtop centrifuge. With microprocessor control, impulse key for short centrifuging, convenient twist-lock lid closure, lid holding device and prograable memories. Easy entry of the parameters via foil keypad. Actual values are displayed during centrifugation. Hettich Specifications Max. rcf: Max. speed: Max. capacity: 78xg 8000rpm 6 x ml Type Description Dimensions Weight (W x D x H) kg EBA without rotor 7 x 0 x 7 approx. 9.9 Accessories for benchtop centrifuge EBA Hettich Type Description A A Angle rotor for x 0. to ml microtubes with lid Angle rotor for 0 x 0. to ml microtubes with lid with bio-containment Angle rotor for max. x ml Angle rotor for max. 6 x ml Angle rotor for x ml or x 7ml with decanting aid Swing-out rotor for max. x ml without carriers Carrier for swing-out rotor 6 for x.6 to ml Swing-out rotor for max. 8 x 0ml without carriers Carrier for swing-out rotor 0 for x.6 to 6ml Carrier for swing-out rotor 0 for x to 0ml Swing-out rotor for max. 8 x 0ml without carriers Carrier for swing-out rotor for x to 0ml Swing-out rotor for max. 6 x ml without carriers Carrier for swing-out rotor for x. to ml Haematocrit rotor for capillaries with lid as evaluation disk Angle rotor for x 0. to ml microtubes with lid* *Aerosol-tight, autoclavable and phenol-resistant lid for this rotor, available on request. Additional accessories on request Benchtop centrifuge ROTOFIX A Microprocessor-controlled benchtop centrifuge with a comprehensive and versatile range Hettich of accessories. exchangeable rotors enable a multitude of applications. With frequency drive, impulse key for short period centrifuging, lid locking and holding. An "rcf" key allows display of the rcf during operation, while the key is pressed. Easy entry of rpm (speed) and time via foil keypad. Actual values are displayed during centrifugation. Specifications Max. rcf: Max. speed: Max. capacity: 6xg 6000rpm x 00ml/ x ml Type Description Dimensions Weight (W x D x H) kg ROTOFIX A without rotor 66 x 0 x 7 approx

71 GENERAL CATALOGUE EDITION 7 Accessories for benchtop centrifuge ROTOFIX A 6. Distillation, Separation, Filtration Separating, centrifuging/benchtop centrifuges Hettich Type Description A Swing-out rotor for max. x 00ml or slide preparations, without carriers Swing-out rotor for max. x 00ml without carriers Round carrier 00ml fitting into swing-out rotor 6 Round carrier 00ml fitting into swing-out rotor Round carrier ml fitting into swing-out rotor Lid for round carriers 8 and Swing-out rotor for max. 8 x ml without carriers Swing-out rotor for max. x ml without carriers Swing-out rotor for 6 x ml or 6 x ml conical tubes with screw cap Swing-out rotor for 8 x ml or 8 x ml conical tubes with screw cap Angle rotor for 8 x ml or x ml without carriers Angle rotor for max. x ml Angle rotor for max. 6 x 8ml Cyto rotor for 6 slide preparations without carriers Cyto rotor for 8 slide preparations with carriers Additional accessories on request Benchtop centrifuges UNIVERSAL 0/0 R The UNIVERSAL 0/0 R impress with excellent performance in both the high and low Hettich speed ranges, and versatile, easily exchangeable accessories. At low speeds, they process standard tubes up to a volume of 00ml, microtitre plates, conical tubes with screw cap, blood collection tubes and cyto accessories. Microlitre tubes can be accelerated to an rcf of 8. A selection of 9 rotors is available for the UNIVERSAL 0/0 R centrifuges. With frequency drive, microprocessor control, impulse key for short centrifuging, quick-entry foil keypad and digital display. As necessary, a switch key enables entry/display of rpm (speed) or rcf. Ten complete running prograes can be stored and recalled. Temperature in the refrigerated UNIVERSAL 0 R is adjustable within a range of -0 to +0 C. Specifications Max. rcf: Max. speed: Max. capacity: 8xg 00rpm x 00ml/ x ml Type Description Dimensions (W x D x H) UNIVERSAL 0 without rotor 9 x 0 x 6 UNIVERSAL 0 R without rotor, with refrigeration 0 x 69 x 6 Weight kg approx. approx Accessories for benchtop centrifuges UNIVERSAL 0/0 R Hettich Type Description A B 689-A 60-A Swing-out rotor for max. x 00ml without carriers Swing-out rotor for max. x 00ml or slide preparations without carriers Swing-out rotor for max. x 00ml without carriers Round carrier 00ml for swing-out rotor 9 Round carrier 00ml for swing-out rotor 9, can be closed with lid 8 Round carrier 00ml for swing-out rotor 6 Round carrier 00ml for swing-out rotor Round carrier ml for swing-out rotor Lid for round carriers 0, 8 and Swing-out rotor for 6 x ml or 6 x ml conical tubes with screw cap Swing-out rotor for 8 x ml or 8 x ml conical tubes with screw cap Swing-out rotor for max. x ml without carriers Swing-out rotor for max. 8 x ml without carriers Swing-out rotor -place for max. 0 microtitre plates without carriers Carrier for plates fitting into swing-out rotor 60 Swing-out rotor -place for max. microtitre plates without carriers Carrier for plates fitting into swing-out rotor 6 Angle rotor for x 0. to ml with lid Angle rotor for x 0. to ml with lid Lid with bio-containment, autoclavable, for angle rotor 0-B Lid with bio-containment, autoclavable and phenol-resistant for angle rotor 0-B Angle rotor for 0 x 0. - ml with lid with bio-containment Angle rotor for max. 6 x 8ml Angle rotor for 8 x ml or x ml without carriers Angle rotor for max. x ml, max. 6 rcf Angle rotor for max. x ml, max. 68 rcf Haematocrit rotor for capillaries with lid as evaluation disk Cyto rotor for 6 slide preparations without carriers Cyto rotor for 8 slide preparations with carriers Additional accessories available on request

72 6. Distillation, Separation, Filtration Separating, centrifuging/benchtop centrifuges GENERAL CATALOGUE EDITION 7 Benchtop centrifuges ROTINA 80/80 R High-performance, benchtop centrifuges with a comprehensive range of accessories Hettich especially for applications in the fields of diagnostics, genetics and microbiology. Both models offer a choice of rotors. With frequency drive, microprocessor control, impulse key for short centrifuging and powered lid locking. The advanced C control panel significantly facilitates daily laboratory routine. Parameter selection is done via the use of symbol keys. Values are set with the control knob, and recorded by pressing the Start key. Digital display. As necessary, a switch key enables entry/display of rpm (speed) or rcf. With 98 prograable memories. Temperature within the chamber of the refrigerated ROTINA 80 R is controllable within a range of -0 to +0 C. The temperature can also be set in degrees Fahrenheit Specifications: Max. rcf: Max. speed: Max. capacity: 00xg 00rpm x ml Type Description Dimensions (W x D x H) ROTINA 80 without rotor 7 x 600 x 8 ROTINA 80 R without rotor, with refrigeration 7 x 7 x 8 Weight kg approx. approx. 8 Accessories for benchtop centrifuges ROTINA 80/80 R Type Description Hettich A A A Swing-out rotor for max. x ml without carriers Round carrier ml for swing-out rotor 7 Lid with bio-containment for round carrier 7 Swing-out rotor for max. x ml without carriers Swing-out rotor for max. 6 x ml without carriers Swing-out rotor for 0 x ml or 0 x ml conical tubes with screw cap Swing-out rotor -place for max. 0 microtitre plates without carriers Carrier for plates for swing-out rotor 760 Angle rotor for max. 6 x 8ml Angle rotor for max. 6 x 9ml with lid with bio-containment Angle rotor for 0 x 0. to ml with lid with bio-containment Drum rotor for max. 60 x 0. to ml without adapters Cyto rotor for 8 slide preparations without carriers Cyto rotor for 8 x ml or x ml without carriers Additional accessories on request

73 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Separating, centrifuging/benchtop centrifuges Benchtop centrifuges ROTINA 0/0 R The compact benchtop centrifuges are designed both for high sample throughput and high sample volumes. With a max. Hettich capacity of x 600ml, 0 blood collection tubes or 6 microtitre plates they are ideal for applications in clinical chemistry, in biotechnology and in life science research facilities. With frequency drive, microprocessor control and impulse key for short centrifuging and motorised lid locking. The advanced C control panel is ideal for daily routine tasks in the laboratory. Parameter selection is achieved via the use of symbol keys. Values are set with the control knob, and recorded by pressing the Start key. Digital display. 98 prograable memories. Temperature in the refrigerated ROTINA 0 R is adjustable within a range of -0 to +0 C. The temperature can also be set in degrees Fahrenheit. Specifications Max. rcf: Max. speed: Max. capacity: 00xg 00rpm x 600ml Type Description Dimensions (W x D x H) ROTINA 0 without rotor 6 x 6 x ROTINA 0 R without rotor, with refrigeration 7 x 6 x Weight kg approx. 7 approx Centrifuges ROTANTA 60 series For sample processing in clinical chemistry, biotechnology, molecular biology and the Hettich pharmaceutical industry a wide selection of adapters is available to accoodate the most varied types of tubes. Developed for large volumes, the model offers frequency drive, microprocessor control, impulse key for short centrifuging, and powered lid locking. As necessary, a switch key enables entry/display of RPM (speed) or RCF. All ROTANTA 60 models feature the extended C control panel, which provides up to 98 prograable memories. Temperature in the refrigerated ROTANTA 60 R is controllable within a range of -0 C to +0 C. The temperature can also be set in degrees Fahrenheit. The refrigerated ROTANTA 60 R can also be supplied in an underbench version or as a floorstanding model. Without rotors. Please order separately. Specifications Max. capacity: Max. speed range: Max. rcf: Running time: x 7ml 00rpm 00xg sec - 99h : 9min : 9sec, continuous run, short cycle mode Type Description Dimensions Weight Voltage (W x D x H) kg /60 Hz ROTANTA 60 ROTANTA 60 ROTANTA 60 R ROTANTA 60 R ROTANTA 60 RC ROTANTA 60 RF Benchtop centrifuge, classic Benchtop centrifuge, classic Benchtop centrifuge, cooled Benchtop centrifuge, cooled Underbench centrifuge, cooled Floorstanding centrifuge, cooled x 706 x 6 x 706 x x 706 x x 706 x 6 x 697 x 68 x 697 x 96 approx. 9 approx. 0 approx. approx. approx. 0 approx V 00-7 V 00-0 V 00-7 V 00-0 V 00-0 V

74 6. Distillation, Separation, Filtration Separating, centrifuging/benchtop centrifuges GENERAL CATALOGUE EDITION 7 Accessories for the ROTANTA 60 centrifuge series Hettich Type Description A Swing-out rotor for max. x 7ml or blood bag systems ml Round carrier 7ml for swing-out rotor 6 Lid with bio-containment for round carrier 60 Rectangular carrier for tubes and plates for swing-out rotor 6 Lid with bio-containment for rectangular carrier 68 Swing-out rotor for max. x ml without carriers Swing-out rotor for max. 6 x ml without carriers Round carrier for max. ml for swing-out rotors 69 and 6 Rectangular carrier for max. 00ml for swing-out rotors 69 and 6 Lid with bio-containment for round carrier 9 Swing-out rotor -place for max. microtitre plates without carriers Angle rotor for 0 x 0. - ml with lid with bio-containment Angle rotor for max. 6 x 9ml with lid with bio-containment Angle rotor for max. 6 x ml with lid with bio-containment Swing-out rotor -place for ml or 00ml ASTM tubes without carriers Angle rotor 6-place for ml or ml Schlenk tubes Swing-out rotor 6-place for 0ml chrome bath tubes Additional accessories available on request Floor standing centrifuges ROTIXA S/ RS Large-capacity, floor standing centrifuges for high sample throughput. ROTIXA Hettich S/ RS are the centrifuges of choice for development and quality control laboratories in the life science industry and for general medical laboratories. They also accoodate clinical chemistry analyser racks from various manufacturers. Both models feature frequency drive, microprocessor control and impulse key for short period centrifuging. The ROTIXA centrifuges feature the S control panel as standard. This control panel offers 89 prograable memories and many special options. The refrigerated Rotixa RS can control the chamber temperature between -0 and +0 C. On request, it can also be supplied in a heating/cooling version with a temperature range of - 0 to +60 C. Specifications Max. rcf: Max. speed: Max. capacity: xg.0rpm x 000ml Type Description Dimensions (W x D x H) ROTIXA S without rotor, with S control panel 6 x 70 x 00 ROTIXA RS without rotor, with S control panel and refrigeration 6 x 70 x 00 Weight kg Accessories for floorstanding centrifuges ROTIXA S/ RS Hettich Type Description A Swing-out rotor for max. x 000ml without carriers Groove ring carrier for swing-out rotor 9 Bucket with lid 000ml for groove ring carrier Rectangular carrier for max. 7ml for swing-out rotor 9 Lid for rectangular carrier 9 Swing-out rotor for max. 6 x ml without carriers Round carrier for max. ml for swing-out rotor 96 Lid with bio-containment for round carrier 9 Rectangular carrier for max. 00ml for swing-out rotor 96 Lid for rectangular carrier Swing-out rotor -place for racks or max. 6 microtitre plates without carriers Carrier for swing-out rotor 8 Swing-out rotor -place for ml or 00ml ASTM tubes without carriers Angle rotor 6-place for ml or ml Schlenk tubes Additional accessories available on request

75 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Separating, centrifuging/centrifuge tubes Centrifuge tubes, round bottom, DURAN To DIN 8970 part. Glass Type I/neutral glass as per USP, EP and JP. Autoclavable. DURAN Group Capacity Dia. Height ml 6 80* 80 * * Not to DIN. Centrifuge tubes, round bottom, AR glass Round bottom. Graduated or ungraduated. Capacity Dia. Length Grad. ml ml 0 to 0 to to 70 to 00 0 to 0 to no no no no yes yes yes Centrifuge tubes, glass, round bottom, graduated, DURAN In white enamel, rimless. Capacity Dia. Length ml 0 to 0 to Centrifuge tubes, AR glass, conical bottom Ungraduated. Capacity approx. ml. Wall thickness approx.. Maximum loading: 0xg rcf. BRAND Dia. Length Base Neck conical, long taper conical, short taper round bottom beaded rim rimless rimless

76 6. Distillation, Separation, Filtration Separating, centrifuging/centrifuge tubes GENERAL CATALOGUE EDITION 7 Centrifuge tubes, conical, PP PP. High chemical resistance. Autoclavable. Can withstand temperatures up to +0 C. Cannot be used with naked flame. Kartell Capacity Dia. Height ml Graduated centrifuge tubes, conical, PP PP. Autoclavable. Can withstand temperatures up to +0 C. Ried. High chemical resistance. Good transparency, especially when in contact with liquids. Cannot be used with naked flame. Can be used as conventional test tubes. Kartell Capacity Grad. Dia. Height ml ml Graduated centrifuge tubes, conical, PMP (TPX ) PMP (TPX ). Autoclavable. Can withstand temperatures up to +70 C. Ried. High chemical resistance. Crystal clear. Cannot be used with naked flame. Can be used as conventional test tubes. Kartell Capacity Grad. Dia. Height ml ml Centrifuge tubes, cylindrical, PP Translucent. PP. Autoclavable. Can withstand temperatures up to +0 C. Ried. High chemical resistance. Cannot be used with naked flame. Can also be used as conventional test tubes. Kartell Capacity Dia. Height ml

77 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Separating, centrifuging/centrifuge tubes Centrifuge tubes, plastic, round bottom Plastibrand, graduated Transparent. PC. Rimless, with moulded graduations. Slightly yellowish in colour. Round bottom. For use with loads up to 00xg rcf. BRAND Note: the strength of Polycarbonate is reduced when it is autoclaved or cleaned using alkaline detergents. Capacity Grad. Dia. Height ml ml LLG-Centrifuge tubes, PP Polypropylene tubes with very good thermal, mechanical and chemical stability. Fitted with screw-on closure. Packed in boxes or bags. With graduations and labelling area. Cytotoxicity-free, DNase/RNase- and human DNA-free. Specifications Centrifugation capacitiy: ml ml 6000g 00g Dia. Height Capacity Form Description ml conical conical conical conical conical conical with rim with rim with rim with rim sterile, single packed non-sterile, in rack non-sterile sterile, single packed non-sterile non-sterile, in rack sterile, single packed sterile non-sterile non-sterile, in rack Centrifuge tubes Polypropylene tubes with very good thermal, mechanical and chemical stability. Fitted with screw-on closure. Packed in boxes or bags. With graduations and labelling area. Tubes are sterile, cytotoxicity-free, DNase/RNase- and human DNA-free. Greiner Bio-One Specifications: Centrifugation capacitiy: ml without rim ml with rim ml with rim 000xg in swing out rotors 00xg in fixed angle rotors 00xg in swing out rotors xg in fixed angle rotors 800xg in swing out rotors 0xg in fixed angle rotors Dia. Height Capacity Form ml conical conical conical conical conical conical conical, with rim conical, with rim conical, with rim

78 6. Distillation, Separation, Filtration Separating, centrifuging/centrifuge tubes GENERAL CATALOGUE EDITION 7 Centrifuge tubes, conical tubes, PP/PE-HD New and improved conical tubes with the largest writing area on the market for Nunc increased traceability with additional space for labeling information. Recyclable plastic rack reduces waste in the lab. New conical tubes have higher RCF ratings, which enable more applications from low speed to super speed centrifugation. They meet USP class VI requirements and are non-cytotoxic, non-pyrogenic and RNase/DNase free. Graduated, leak proof and sterile (SAL 0-6 ) Material tubes: PP Material caps: PE-HD Capacity Description Max. ml rcf Bulk Racked Bulk Racked 00 x g* 00 x g* 7000 x g* 7000 x g* * When fully supported by conical rotor cavity or conical adaptor. Note the maximum speeds listed are guidelines only. These speeds have been achieved in reliability tests based on sedimentation of. specific gravity fluid at 8 C. Disposable bioreactor CultiFlask ml Disposable culture system for maalian cells growing in suspension, for high throughput screening of process parameters and production cell lines. box of 80 pieces total volume: ml working volume: to ml Sartorius Stedim Type CultiFlask Centrifuge tubes, conical, DURAN Rimless, with conical base. DURAN Group Capacity Dia. Height Angle ml Centrifuge tubes, AR glass, conical bottom, graduated Graduated, with rim and conical bottom. BRAND Capacity approx. ml. Graduation of approx. volume and labelling in high-contrast white enamel. Graduated from 0 to ml x 0.ml divisions. Wall thickness, approx.. For use with loads up to 0xg rcf. Dia. Height ASTM centrifuge tube BLAUBRAND Borosilicate glass.. Cylindrical, with conical base. Complies with ASTM D 9. Capacity 00ml. Graduations and labelling in high-contrast blue enamel. Maximum loading 700 xg rcf. Supplied singly. Graduated, ml: In subdivisions, ml: 0 to to 0.0 to 0.0 to 0. to to.00 to 00.0 BRAND 60 Capacity ml

79 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Separating, centrifuging/centrifuge tubes ASTM centrifuge tube BLAUBRAND. Borosilicate glass.. Pear-shaped, with cylindrical base. Former standard ASTM D 96. Capacity 00ml. Graduations and labelling in high-contrast blue enamel. Maximum loading 700xg rcf. Supplied singly. Graduated, ml: In subdivisions, ml: 0 to to 0. to 0. to to.00 to 00.0 BRAND Capacity ml Centrifuge tubes Oak Ridge Typ, FEP Teflon FEP with Tefzel ETFE screw cap. Resistant to all acids, bases and solvents. Nalgene Autoclavable. Operating temperature range -00 to + C. Can be used brim-full in refrigerated centrifuges at up to 000xg rcf. Leak-proof. Accessory sealing cap assemblies are available for all s. Capacity Dia. Height Type ml 0 0 * * Capacity: 6ml to the brim. Teflon and Tefzel are a registered trademark of DuPont. Centrifuge tubes Oak Ridge Typ, PSU Transparent. Polysulphone (PSU) with PP screw cap. As stable and robust as PC Nalgene test-tubes, but considerably more resistant to acids and alkalis. Autoclavable. Can be used in refrigerated or ambient centrifuges at up to 000xg rcf. Accessory sealing cap assemblies are available for all s. Notes: If autoclaving, the tubes must be filled to 80% of their total capacity. Polysulphone must not be used with Tween, as this causes hairline cracks to form. Type Capacity Dia. Height ml 0 0 * * Capacity: ml to the brim. Centrifuge tubes Oak Ridge Typ 8, PC Transparent. PC with PP screw cap. Can be used in suitable refrigerated or ambient centrifuges at up to 000xg rcf. Autoclavable. Accessory sealing cap assemblies are available for 0ml, 0ml and ml s. Nalgene Type Capacity Dia. Height ml * 8** * Capacity: ml to the brim. **Capacity: 8ml to the brim. 6

80 6. Distillation, Separation, Filtration Separating, centrifuging/centrifuge tubes GENERAL CATALOGUE EDITION 7 Centrifuge tubes Oak Ridge Typ 9, PP-copolymer PP-copolymer with PP screw cap. PPCO is more resistant to chemicals than PC. Nalgene Autoclavable. When wet, the translucent test-tube enables observation of the contents. Can be used in refrigerated and unrefrigerated centrifuges at up to 000xg rcf. Accessory sealing cap assemblies are available for all s. Type Capacity Dia. Height ml * * Capacity: ml to the brim. Centrifuge bottles Typ 0, PP-copolymer PP-copolymer with PP screw cap. Autoclavable. Nalgene Type Capacity Dia. Height Max. ml rcf * * Up to 70xg if using the sealing screw cap Centrifuge bottles Typ, PC PC with PP screw cap. Crystal clear. Good mechanical strength. Autoclavable. Leak-proof Nalgene even at low speeds. In order to ensure that the system is leak-proof even at high speeds and when centrifuging dangerous substances, the ml and 000ml s must be used in conjunction with sealing screw cap sets. Type Capacity Dia. Height Max. ml rcf Sealing cap assemblies Typ DS, PP PP screw cap with Tefzel ETFE plug liner and viton O-ring. Leak-proof at recoended maximum speed and rcf for tubes. Suitable for working with aggressive chemicals. The 8 assembly has a PP shoulder reinforcement ring to prevent collapsing of the ml bottles. Nalgene 6 Type For tubes Screw cap dia. ml DS 0 0 DS DS 8 Tefzel is registered trademark of DuPont

81 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Separating, centrifuging/centrifuge tubes Sealing cap assemblies with silicone seal Typ DS, PP For Oak Ridge centrifuge test tubes made of PP, PC and polysulphone. Nalgene Type DS DS DS DS For tubes ml 8 / 0 0 / 000 Screw cap dia Wide-mouth centrifuge bottles Typ, PP-copolymer PP-copolymer with sealing screw cap. Autoclavable. Nalgene Type Capacity Dia. Height Max. rcf ml x g Centrifuge Bottles with Sealing Cap, SuperSpeed, Types 0, Designed to boost productivity and pellet recovery in super speed, large volume gross Nalgene separation applications. Process one full Litre in each window-clear bottle at speeds up to 80xg. Graduated, wide-mouth bottle simplifies decanting, re-suspensions and pellet removal. Smooth inner walls are less likely to shear delicate cells. Ideal for bacterial, yeast and tissue isolations. Improve viral harvesting in vaccine production. Reduce shearing in maalian culture separations. PC offers excellent clarity. Ergonomic design facilitates loading, recovery and storage of samples. Recoended operating temperature range is from C to C; storage to -70 C. Brim capacity is.0ml. Nominal Dimensions (Diam. x H): 96. x 9.8. Before autoclaving, just set closure on top of bottles without engaging the threads. For proper performance these bottles must be filled to at least 80% of the total capacity. Type Capacity Material ml PC PPCO Centrifuge bottles Type 0, BioBottle Centrifuge bottle with L capacity. - Separating large volumes up to L - Centrifugation up to 7xg, at temperatures from C to C - Bottle meets the requirements of USP VI - Non-cytotoxic, not hemolytic - PPCO bottle, PP seal screw cap with silicone seal - Graduated, total volume of 80ml - Excellent chemical resistance - Before autoclaving, unscrew the cap and place it on the bottle neck - Bottles must always be at least 80% filled Nalgene Type Capacity Material ml PPCO PPCO, sterile

82 6. Distillation, Separation, Filtration Separating, centrifuging/centrifuge tubes GENERAL CATALOGUE EDITION 7 Centrifugal concentrators, Vivaspin 0 Vivaspin 0µl unit with.ml sample carrier tube can be used in a fixed angle rotor. The vertical, built-in membrane guarantees minimal membrane fouling and provides rapid sample concentration. Low protein adsorption gives minimal sample loss. Sartorius Stedim Membrane surface: 0.cm² Max. rcf.: 00 x g Hold-up volume: < µl Centrifugal concentrators, Vivaspin 0 Membrane: polyethersulphone Sartorius Stedim MWCO Starter kit ( ea. K to 00K) Centrifugal concentrators, Vivaspin This ml volume unit combines the rapidity of the classic Vivaspin products with reduced Sartorius Stedim internal surface and membrane areas for superior recoveries from very dilute solutions. With a choice of suitable membranes (PES, CTA, Hydrosart) Vivaspin provides the highest flexibility for process optimisation. Vivaspin guarantees maximum sample recovery either by reverse centrifuging into the concentrate recovery cap or by directly pipetting the concentrate from the deadstop pocket built into the bottom of the concentrator. Membrane surface:.cm² Max. rcf.: 8000 x g Hold-up volume: < 0µl Centrifugal concentrators, Vivaspin Membrane: polyethersulphone Sartorius Stedim MWCO Vivaspin 6 Vivaspin 6ml concentrators have been developed to offer increased volume flexibility and Sartorius Stedim performance. Vivaspin 6 can process an impressive 6ml in either swing-out buckets or fixed angle rotors accepting standard ml conical bottom test tubes. The Vivaspin 6 features twin vertical membranes for unparalleled filtration speeds and 00x plus concentrations. 6 Membrane area:.cm² Max. centrifugal force: 0000 x g Dead volume: < 0µl

83 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Separating, centrifuging/centrifuge tubes Centrifugal concentrators, Vivaspin 6 Membrane: polyethersulphone Sartorius Stedim MWCO µm µm Starter kit ( ea. K to 00K) Vivaspin 0 Vivaspin 0ml centrifugal concentrators have been developed to offer increased volume Sartorius Stedim flexibility and performance. Vivaspin 0 handles up to 0ml in swing bucket centrifuges and ml in fixed angle rotors accepting ml centrifuge tubes. Featuring twin vertical membranes for unparalleled filtration speeds the Vivaspin 0 can achieve 00x plus concentrations. Remaining volume is easy to read off the printed scale on the side of the concentrator and the modified dead stop pocket further simplifies direct pipette recovery of the final concentrate. Membrane area: 6.0cm² Max. centrifugal force: 8000xg Dead volume: < 0µl Centrifugal concentrators, Vivaspin 0 Membrane: polyethersulphone Sartorius Stedim MWCO µm µm Starter kit ( ea. K to 0. µm) Centrifugal filtration units, Centrisart Ι Centrisart Ι is a ready to use unit for small volume centrifugal ultrafiltration to separate proteins from low molecular weight substances in biological samples. Typical applications include: - Drug binding studies - Determination of metabolites in serum - Protein removal from blood samples - Cleaning of liposomes (virus removal) Sartorius Stedim Type Centrisart,000 MWCO CTA Centrisart 0,000 MWCO CTA Centrisart 0,000 MWCO CTA Centrisart 00,000 MWCO PES Starter pack ( units each of K, 0K, 0K, 00K) CTA = Cellulose tri-acetate PES = Polyethersulphone

84 6. Distillation, Separation, Filtration Separating, centrifuging/centrifuge tubes-separating funnels GENERAL CATALOGUE EDITION 7 Crossflow filter units, VivaFlow Thin channel, crossflow filter units with cm²/00cm² filter areas for capacities Sartorius Stedim between 00ml/0ml and L. This system provides high crossflow rates at minimum pumping pressure and does not require additional fittings for scale-up. VivaFlow is easy to operate with a flow restrictor and, optionally, a pressure indicator. Modular construction with luer connections allows interlocking of units in series for easy scale-up. Recovery rates are maximised due to optimised recirculation volume and by use of low adsorption materials. Disposable. For greater volumes, VivaFlow 00 is available with a filter area of 00cm² and includes pressure indicator, flow restrictor, filtrate tubing and connectors. Centrifugal concentrators, Vivacell 70 Membrane: polyethersulphone Sartorius Stedim MWCO Description µm µm Accessories available on request. with x filtrate bottles to fit ml centrifuge rotors with x filtrate bottles to fit ml centrifuge rotors with x filtrate bottles to fit ml centrifuge rotors with x filtrate bottles to fit ml centrifuge rotors with x filtrate bottles to fit ml centrifuge rotors with x filtrate bottles to fit ml centrifuge rotors without filtrate bottles without filtrate bottles without filtrate bottles without filtrate bottles without filtrate bottles without filtrate bottles Separating funnels "squibb" Supplied with PTFE stopcock, graduated or ungraduated. According to DIN. Isolab Capacity NS Description ml /6 9/6 9/6 9/6 ungraduated ungraduated ungraduated ungraduated ungraduated ungraduated graduated graduated graduated graduated graduated graduated

85 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Separating, centrifuging/separating funnels Separating funnels, Borosilicate glass., Squibb-pattern, with PTFE key Squibb-pattern. With glass stopcock, PTFE key and retaining device. Available with, or without, graduations to read the approximate volume. With PP conical stopper. Lenz Capacity Socket Bore Graduations ml NS ml /6 9/6 9/6 9/ without without without without without without Separating funnels, conical, borosilicate glass. Supplied with PTFE stopcock, graduated or ungraduated. According to DIN. Isolab Capacity Description ml ungraduated ungraduated ungraduated ungraduated ungraduated ungraduated graduated graduated graduated graduated graduated graduated Separating funnels, Borosilicate glass., conical, with PTFE key Conical pattern. With glass stopcock, PTFE key and retaining device. Available with, or without, graduations to read the approximate volume. With PP conical stopper. Lenz Capacity Socket Bore Grad. ml NS ml /6 9/6 9/6 9/ without without without without without without Separating funnels with screw cap, Type 0, FEP Transparent. Teflon FEP, Tefzel ETFE stopcock and ETFE screw cap. Impact resistant. Non-wetting surfaces ensure no liqiud residue adhesion. Chemically stable. Length of stem under stopcock 6. Autoclavable. Type Capacity Screw cap dia. ml Teflon and Tefzel are registered trademark of DuPont Nalgene

86 6. Distillation, Separation, Filtration Separating, centrifuging/separating funnels GENERAL CATALOGUE EDITION 7 Separating funnel holder PP Manufactured from best quality polypropylene. Suitable to hold all types of laboratory funnels and also separatory funnels with diameter up to. Two tapered wedges are provided to ensure firm grip. Isolab Type Separating funnel holder 9. 9 Dropping funnels, cylindrical, with pressure equalizing tube Borosilicate glass., cylindrical shape, with pressure equalising tube. DIN and DIN 67. Isolab Capacity NS ml / Dropping funnels, cylindrical, with pressure equalising tube Borosilicate glass.. Cylindrical shape, with pressure equalising tube. With NS socket and interchangeable PE stopper, plug with retaining device. With graduations for reading of the approx. volume. Two types available: - With solid glass key - With PTFE key Lenz Capacity NS Bore Grad. Keys ml ml / / / / / / / solid solid solid solid solid solid solid solid solid PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE

87 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Separating funnels-filtration/filter paper, qualitative Insertion tubes DURAN tubing. With cone, enclosing a bent insertion tube with tubing connection. Insertion tube diameter x length: 6 x 00. Lenz Cone NS / LLG-Filter paper, qualitative grades Made from 00 % cellulose. Ash content 0,06 %. Filtration speed according to DIN 7. Capacity of separation according to DIN. LLG-Filter paper, plain disc, qualitative Fast Dia. 0 8 Filtration time secs LLG-Filter paper, qualitative, filter circles Medium speed Dia Filtration time secs LLG-Filter paper, qualitative, sheet Medium speed Dimensions Filtration time secs. 60 x LLG-Filter paper, qualitative, circles Medium speed Dia Filtration time secs

88 6. Distillation, Separation, Filtration Filtration/Filter paper, qualitative GENERAL CATALOGUE EDITION 7 LLG-Filter paper, qualitative, folded filters Medium speed Dia Filtration time secs Filter paper, qualitative, folded filters Hahnemühle Type Weight Dia. g / m² FP 9 FP 9 FP 9 FP 9 FP 9 FP 9 FP 9 FP 9 FP 9 FP 9 FP 9 FP 9 FP 9 FP 9 FP 9 FP 9 FP 9 FP 9 FP 9 FP 9 FP 9 FP 97 FP 97 FP 97 FP 97 FP 97 FP 97 FP 97 FP 97 FP 97 FP 97 FP 97 FP 98 FP 98 FP 98 FP 98 FP 98 FP 98 FP 98 FP 98 FP Filter paper, qualitative, Grade hw, circles and sheets Material: alpha cellulose (9%) Properties: medium speed filtration, thin Filtration time: to secs. Surface weight: 6g/m² Ash content: < 0.% Sartorius Stedim 60 Dia x Other diameters/formats are available on request.

89 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Filter paper, qualitative Filter paper, qualitative, Grade hw, folded filters Sartorius Stedim Dia Other diameters/formats are available on request. Filter paper, qualitative, Grade 88, folded filters Very smooth surface, very strong, with enhanced wet strength. Chemically stable against acids and weak alkalis, especially suited to vacuum and pressure filtration. Sartorius Stedim Properties: Filtration time: Surface weight: Rapid filtration, coarse porosity 6 to secs. 8g/m² Dia Other diameters/formats are available on request. Filter paper, qualitative, type MN 6, circles Medium speed, medium smooth. MACHEREY-NAGEL Dia Filtration time secs. 0 to 0 to 0 to 0 to 0 to 0 to 0 to 0 to Filter paper, qualitative, type MN 6¼, filter circles Medium speed, medium smooth. MACHEREY-NAGEL Dia Filtration time secs. 0 to 0 to 0 to 0 to 0 to 0 to 0 to 0 to 0 to 0 to 0 to 0 to

90 6. Distillation, Separation, Filtration Filtration/Filter paper, qualitative GENERAL CATALOGUE EDITION 7 Filter paper, qualitative, type MN 6¼, filter circles Fast, grained. MACHEREY-NAGEL Dia Filtration time secs Filter paper, qualitative, type MN 6¼, folded filters Medium-fast, grained. MACHEREY-NAGEL Dia Filtration time secs. 0 to 0 to 0 to 0 to 0 to 0 to Filter paper, qualitative, type MN 67¼, folded filters Fast, medium smooth. MACHEREY-NAGEL Dia Filtration time secs. 7 to 9 7 to 9 7 to 9 7 to 9 7 to 9 7 to Filter paper, Grade number Circles and sheets. Qualitative. The most widely used grade of filter paper. Flowrate: Medium/Fast Retention: Medium Wet strength: Low Thickness: 0.8 Ash: 0.06% 6 Dia x 60 x x x x

91 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Filter paper, qualitative Filter paper, Grade number Circles and sheets. Qualitative. Slightly thicker and more retentive than number. Flowrate: Medium/Fast Retention: Medium Wet strength: Low Thickness: 0.9 Ash: 0.06% Dia x Filter paper, Grade number V Qualitative. Folded (pre-pleated) version of Number. Flowrate: Medium/Fast Retention: Medium Wet strength: Low Thickness: 0.9 Ash: 0.06% Dia Filter paper, Grade number Circles and sheets. Qualitative. Very thick. Double the thickness of number. Flowrate: Medium Retention: High Wet strength: Medium Thickness: 0.9 Ash: 0.06% Dia x Filter paper, Grade number Circles. Qualitative. Fast flowrate. Excellent retention of coarse and gelatinous precipitants. Creped. Supplied in packs of circles as outlined below. Flowrate: Fast Retention: Medium Wet strength: Low Thickness: 0. Ash: 0.06% Dia

92 6. Distillation, Separation, Filtration Filtration/Filter paper, qualitative GENERAL CATALOGUE EDITION 7 Filter paper, Grade number Circles. Qualitative. Slow flowrate. Retains fine precipitates, grained surface. Supplied in packs of circles as outlined below. Flowrate: Slow Retention: High Wet strength: Low Thickness: 0.0 Ash: 0.06% Dia Filter paper, Grade number 6 Circles. Qualitative. Slow. Supplied in packs of circles as outlined below. Flowrate: Slow Retention: High Wet strength: Low Thickness: 0.8 Ash: 0.0% Dia Filter paper, Grade 9 Circles and sheets. Qualitative. General purpose schools grade, creped. Flowrate: Retention: Wet strength: Thickness: Medium/Fast Medium High 0. Dia x Filter paper, grade Circles. Qualitative. Fast flow. Excellent retention of coarse and gelatinous precipitates, creped. Flow rate: Fast Retention: Medium Wet strength: High Thickness: 0. Ash: 0.06% 6 Dia

93 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Filter paper, qualitative Filter paper, grade V Circles. Prepleated. Qualitative. Excellent retention of coarse and gelatinous precipitates, creped. Dia Filter paper, grade Circles. Qualitative. Thin and very strong. Smooth surface. Flow rate: Fast Retention: Medium Wet strength: High Thickness: 0.9 Ash: 0.06% Dia Filter paper, grade V Circles. Prepleated. Qualitative. Thin and very strong. Smooth surface. Dia Filter paper, Grade Circles. Qualitative. Hardened. Ashless. Highly retentive for fine precipitates. Flow rate: Fast Retention: Medium Wet strength: High Thickness: 0.6 Ash: 0.08% Dia We can supply this manufactorer s whole product range! 6

94 6. Distillation, Separation, Filtration Filtration/Filter paper, qualitative GENERAL CATALOGUE EDITION 7 Qualitative filter paper, Grade 9 ½, folded filters Medium to slow to µm - time saving, because folded filters have a larger surface area than comparable circular filters - for medium to fine precipitates and general laboratory work - Weight: 8g/m² - Thickness: 0.7 Dia Qualitative filter paper, Grade 9, circles and sheets Medium fast to 7µm - thin filter paper - for medium to fine precipitates and general laboratory work - Weight: 68g/m² - Thickness: 0.6 Dia Qualitative filter paper, Grade 9½, folded filters Slow to µm - for fine precipitates - Weight: 8g/m² - Thickness: 0.7 Dia Qualitative filter paper, Grade 9½, folded filters Medium fast, to 7µm - time saving, because folded filters have a larger surface area - filter faster than comparable circular filters - for medium to fine precipitates and general laboratory work - Weight: 68g/m² - Thickness: 0.6 Dia

95 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Filter paper, qualitative Qualitative filter paper, Grade 97, circles and sheets Medium fast, to 7µm - thicker and faster than 9 - for medium to fine precipitates - Weight: 8g/m² Thickness: 0.9 Dia x Qualitative filter paper, Grade 97½, folded filters Medium fast, to 7µm - time saving, because folded filters have a larger surface area - for medium to fine precipitates - Weight: 8g/m² Thickness: 0.9 Dia Qualitative filter paper, Grade 98½, folded filters Medium to fast, 7 to µm - thick filter paper - for fast filtration of coarse precipitates - Weight: 80g/m² Thickness: 0. Dia x Qualitative filter paper, Grade 60 h, circles and sheets Slow < µm - thick filter paper - for fine precipitates - Weight: 8g/m² - Thickness: 0. Dia Qualitative filter paper, thick, Grade 60eh½, folded filters Very slow, < µm - thick filter paper - for fine precipitates - Weight: 8g/m² - Thickness: 0. Dia

96 6. Distillation, Separation, Filtration Filtration/Filter paper, qualitative-filter paper, quantitative GENERAL CATALOGUE EDITION 7 Qualitative filter paper, Grade 7½, folded filters Fast, to µm - wet-strength - time saving, because folded filters have a larger surface area than circular filters of the same diameter - Weight: g/m² - Thickness: 0.8 Dia Qualitative filter paper, Grade 60½, folded filters Fast, to µm - time saving, because folded filters have a larger surface area - filter faster than comparable circular filters - for coarse precipitates (e.g. hydroxide and sulphide) - Weight: 80g/m² - Thickness: 0.9 Dia LLG-Filter papers for quantitative analysis Made from 00 % cellulose. Ash content 0,007 %. Filtration speed according to DIN 7. Capacity of separation according to DIN. LLG-Quantitative filter paper, circles Fast, ashless Dia Filtration time secs LLG-Quantitative filter paper, circles Slow, ashless Dia. Filtration time secs

97 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Filter paper, quantitative Filter paper, quantitative, coloured, round filters Hahnemühle Type Colour Weight Dia. g / m² FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/ FP 89/6 FP 89/6 FP 89/6 FP 89/6 FP 89/6 FP 89/6 FP 89/6 FP 89/6 FP 89/6 FP 89/6 black black black black black black black black black white white white white white white white white white white white blue blue blue blue blue blue blue blue blue yellow yellow yellow yellow yellow yellow yellow yellow yellow red red red red red red red red red green green green green green green green green green green Filter paper, quantitative, Grade 88 - black spot, circles and sheets Properties: Filtration time: Surface weight: Rapid filtration, coarse porosity 6 to secs. 8g/m² Sartorius Stedim Dia Other formats and diameters are available on request. 69

98 6. Distillation, Separation, Filtration Filtration/Filter paper, quantitative GENERAL CATALOGUE EDITION 7 Quantitative filter paper, Grade 89 - white spot, circles and sheets Properties: Filtration time: Surface weight: medium speed filtration 6 to 8 secs. 8g/m² Sartorius Stedim Dia Other formats and diameters are available on request. Quantitative filter paper, Grade 9 - blue spot, circles and sheets Properties: Filtration time: Surface weight: very slow filtration to secs. 8g/m² Sartorius Stedim Dia x Other formats and diameters are available on request. Filter paper, quantitative, Grade 9 - red spot, circles and sheets Properties: Filtration time: Surface weight: medium fast filtration to 70secs. 8g/m² Sartorius Stedim Dia x Other formats and diameters are available on request. Quantitative filter paper, type MN 60 w, circles Fast, medium smooth, ash-free. MACHEREY-NAGEL 6 Dia. Filtration time secs. 7 to to 9 7 to to 9 7 to 9 7 to 9 Grey pack, equivalent grade to black band

99 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Filter paper, quantitative Quantitative filter paper, type MN 60 m, circles Medium-fast, medium smooth, ash-free. MACHEREY-NAGEL Dia. Filtration time secs. to 0 70 to 0 to 0 0 to 0 to 0 to 0 White pack, equivalent grade to white band Quantitative filter paper, Grade 89/, circles Fast to µm Black ribbon - for coarse, high volume precipitates - for determinations according to the German Standard Methods for the examination of water, waste water and sludge. - most frequently used quantitative filter - Weight: 80g/m² - Thickness: 0.9 Dia Quantitative filter paper, Grade 89/ Medium fast, to µm. White ribbon. - for the analysis of foodstuffs - for carbonates of alkaline earth metals, (NH)[P(MoO0)] x aq., Mg(NH)PO, CaCO (hot precipitates) - Weight: 8g/m² - Thickness: 0.8 Dia Quantitative filter paper, Grade 89/, circles Slow < µm. Blue ribbon. - for very fine precipitates and small particles - for soil analysis - for BaSO (hot precipitate), PbSO, CuO, ZnS, NiS - Weight: 8g/m² - Thickness: 0.6 Dia

100 6. Distillation, Separation, Filtration Filtration/Filter paper, quantitative GENERAL CATALOGUE EDITION 7 Quantitative filter paper, grade 0 Circles. Quantitative. Ashless. Flow rate: Medium Retention: Medium Wet strength: Low Thickness: 0. Ash: 0.007% Dia Quantitative filter paper, grade Circles. Quantitative. Ashless. For filtration of coarse and gelatinous precipitates. Supplied in box of 00. Flow rate: Fast Retention: Medium Wet strength: Low Thickness: 0. Ash: 0.007% Dia Filter paper, grade Circles. Quantitative. Ashless. For filtration of fine precipitates. Flow rate: Slow Retention: Medium Wet strength: Low Thickness: 0.0 Ash: 0.007% Dia

101 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Filter paper, quantitative-glass-fibre filters Phase separators, PS A silicone impregnated, water repellent paper which can be used to separate aqueous solutions from iiscible solvents. The aqueous phase is retained and the organic phase passes through. Will retain solid particles. Can be used either flat under suction not exceeding 70 Hg or quadrant folded in a conical glass funnel. Supplied in box of 00 circles. Note: This paper contains a small quantity of tin complex catalyst. It is therefore not recoended for use when this complex may cause interference, e.g. with the use of dithizone (diphenylthiocarbazone) reagent. Flow rate: Fast Retention: Medium Wet strength: High Thickness: 0.6 Ash: 0.008% Dia Glass microfibre filters Glass microfibre filters have a fast filtration and a high loading capacity and particle retention rate. Manufactured without chemical binder from high grade borosilicate glass. (Exception: GF6, GF9). They are suitable for gravity or low suction filtration. Filtration speeds generally very much higher than conventional cellulose papers. Efficient retention of micron particles. Must be used flat. Ideal for use in flat perforated plate Buchner type funnels (not sintered glass models). Can be used up to C Wide range of applications including: - retention of fine analytical precipitates - retention of biochemical gelatinous precipitates - water/air pollution analyses - as prefilters for membranes - scintillation counting - radioiunoassay. LLG-Glass microfibre filters, filter circles Dia Filtration time secs Pre-filters, glass microfibre Type 00. The standard glass fibre pre-filter, placed directly on top of the membrane filter. With acrylic latex binder (% to 6%, determined by ashing). Sartorius Stedim Dia Other formats are available on request. 6

102 6. Distillation, Separation, Filtration Filtration/Glass-fibre filters GENERAL CATALOGUE EDITION 7 Glass microfibre filters, grade GF 6, circles Glass fibre filters are made of 00% borosilicate glass fibres with an inorganic binder. They are mechanically stable, this makes them easy to use. Temperature resistant up to 0 C. Glass fibre filters are chemically resistant except against hydrofluoric acids and highly concentrated alkalis. They are known for their fast filtration times (compared to other medias) with excellent retention rates, even of very fine particles from aqueous solutions and gases. Application: Gas-/air-monitoring Water and waste water determination Retention rate: 99.97% Filtration time according to Herzberg: 00s Filtration time according to Gurley: 0s Weight: 80g/m² Thickness: µm Dia Glass microfibre filters, grade GF 9, circles With inorganic binder % dretention rate: Filtration time according to Herzberg: 0s Filtration time according to Gurley: 0s Weight: 70g/m² Thickness: µm Dia Glass microfibre filters, grade GF/A The general purpose high efficiency glass microfibre filter. Particle retention to.6µm. Supplied in pack quantities as indicated. 6 Dia x 0 70 x

103 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Glass-fibre filters Glass microfibre filters, grade GF/B Three times thicker and with greater wet strength than GF/A. Particle retention to µm. Supplied in pack quantities as outlined below. Dia x Glass microfibre filters, grade GF/C Extremely efficient filter made to retain fine particles and micro organisms. Particle retention to.µm. Dia x 0 70 x Glass microfibre filters, grade GF/D Thick filter made from less fibres and retaining around µm particles with a very high loading capacity. Extremely high speed. Particle retention to.7µm. Dia Glass microfibre filters, grade GF/F This ultra-fine filter has a 98% retention efficiency for particles as small as 0.7µm in liquids. Particle retention to 0.7µm. Dia x

104 6. Distillation, Separation, Filtration Filtration/Glass-fibre filters-membrane filters GENERAL CATALOGUE EDITION 7 Glass microfibre filters, grade 9-AH Circles. High retention at high flow rates. Widely used in water pollution monitoring techniques for suspended solids, and is specified in US Method 9-AH. Particle retention to.µm. Dia Glass microfibre filters, grade EPM 000 For use in high volume air sampling apparatus. Particle retention to µm. Dia. 0 x Quartz microfibre filters, grade QM-A Manufactured from quartz microfibre to withstand high temperatures. Can be used up to 0 C. Flow rate: Fast Retention: Medium Wet strength: High Thickness: 0.6 Ash: 0.008% Dia x Membrane filters, cellulose acetate Type. Resistant to steam sterilisation up to C, or in dry heat up to 80 C. Very Sartorius Stedim low adsorption (important when filtering proteinaceous solutions). Suitable for particle removal and ultracleaning of aqueous solutions, methanol, ethanol, high-grade alcohols and residue analysis of fuels and oils. The extractable content of these filters make up <% of their weight. Other pore s and formats available on request. Type Pore Dia. µm Other patterns are available on request. 66

105 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Membrane filters Membrane filters, cellulose nitrate Type. White. Very low content of extractable materials. Weight constant after Sartorius Stedim 60 minutes of drying at 0 C. Suitable for residue analysis, microscopic viewing in incident or transmitted light, chemotaxis, x-ray fluorescence, spectrometry and gravimetric analysis. Autoclavable at C. Other pore s and formats are available on request. Type Pore Dia. µm Other patterns are available on request. Membrane filters, Polyamide Type. Polyamide, white. For filtration of alkaline solutions and organic solvents. Sartorius Stedim Type Pore Dia. µm Other patterns are available on request. Membrane filters, blotting, Polycarbonate Type 0. Polycarbonate (PC), white, non-sterile. Ultrapure, polycarbonate membrane with especially smooth surface and fine pore distribution. Applications include COD/TOC testing, particle analysis or epifluorescence microscopy. Sartorius Stedim Type Pore Dia. µm Other patterns are available on request. Membrane filters, Grade AE, made from pure cellulose nitrate Applications: For prefiltration and dust measurement, clarification and sterile filtration. Properties: - Very easily wetted - For aqueous solutions - Hydrophilic - Can be used up to C - Autoclavable up to C Type AE 98 AE 98 AE 99 AE 99 AE 99 AE 99 AE 00 AE 00 Pore Dia. µm

106 6. Distillation, Separation, Filtration Filtration/Membrane filters GENERAL CATALOGUE EDITION 7 Membrane filters, Grade ME, made from mixed cellulose esters Applications: - Excellent for gravimetrical analysis - Especially for aqueous solutions - Ideally suitable for contamination test Properties: -Economical - Constant weight - Hydrophilic - Not sterile - Can be used up to C - Autoclavable up to C Type ME ME ME ME ME ME ME ME ME ME ME7 ME7 ME7 ME8 ME8 ME9 ME9 ME9 Pore Dia. µm Membrane filters, Grade NC, made from cellulose nitrate Grade NC Applications: - For prefiltration and dust measurement, clarification and sterile filtration - For aqueous solutions Properties: - Very easily wetted - Hydrophilic - Can be used up to C - Autoclavable up to C Type NC 0 NC 0 NC 0 NC 0 NC 0 NC NC NC NC NC NC Pore Dia. µm

107 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Membrane filters Membrane filters, Grade NL, made from pure polyamide Application: - Universal filter, especially in the pharmaceutical section Properties: - Mechanically very strong - For aqueous and organic solutions - Hydrophilic - Can be used up to C - Autoclavable up to C Type NL 6 NL 7 NL 7 NL 7 NL 7 Pore Dia. µm Membrane filters, Grade OE, made from cellulose acetate Very high wet strength and very low ability for protein binding. For filtration of aqueous, alcohol and oil-based solutions at temperatures up to 80 C. Description OE 67 OE 67 OE 67 OE 67 OE 67 OE 66 OE 66 OE 66 OE 66 Pore Dia. µm Membrane Filters, Grade RC, Regenerated cellulose Application: For the sterilisation and particle filtration of aqueous and organic solutions Properties - spontaneously wetted, very good wet-strength - high chemical resistance, useful for aqueous and organic media - hydrophilic - can be used up to 80 C - sterilisable by all methods - suitable for use as sterile filter to ASTM-D Type RC 8 RC RC RC RC RC 60 Pore Dia. µm

108 6. Distillation, Separation, Filtration Filtration/Membrane filters GENERAL CATALOGUE EDITION 7 Membrane filters, Grade ST, made from pure cellulose acetate Applications: - ideal for biological and clinical analyses, sterility tests, scintillation measurements Properties: - very low protein binding capacity - suitable for aqueous and alcohol-based media - hydrophilic - can be used up to 80 C, suitable for hot gases - sterilisable by all methods Type ST 68 ST 69 Pore Dia. µm Membrane filters, Grade TE, PTFE with support Applications: - Ideal venting filter for all applications - For aggressive media and cryogenic liquids - Separation of free water from organic solutions - Outstanding as gas/liquid barrier - Filtration of air and (hot) gases Properties: - Chemically inert to aqueous and organic solutions as well as concentrated acids and bases - Hydrophobic - for aqueous filtration the pressure must be higher than the water breakthrough pressure - Can be used up to C - Can be sterilised by all methods except gaa radiation Type TE TE TE TE 6 TE 6 TE 7 TE 7 TE 7 TE 8 TE 8 Pore Dia. µm Membrane filters, Cellulose mixed ester Composed of cellulose acetate (~0%) and cellulose nitrate (~80%). Type Gridded white Gridded white Gridded white Gridded black Pore Dia. µm Membrane filters, Nylon Hydrophilic, durable and compatible with a wide range of aqueous solutions, organic solvents and for the filtration of biological preparations and media. Autoclavable at C. 660 Pore Dia. µm

109 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Membrane filters Membrane filters, PTFE, WTP With PP backing. Pore Dia. µm Membrane filters, Cellulose nitrate, WCN Plain white. Circles. Pore Dia. µm Membrane filters, inorganic, Anodisc Material: Anopore. White. The inorganic membrane Anopore consists of high-purity aluminium oxide and can be used for a wide range of applications. The unique material has a precise, non-deformable honeycomb structure with a narrow pore distribution range that guarantees very efficient particle retention. In addition, the membrane has a low protein binding capacity, minimal autofluorescence, is non-toxic and supports cellular growth. Pore Dia. µm

110 6. Distillation, Separation, Filtration Filtration/Membrane filters GENERAL CATALOGUE EDITION 7 Dispenser Microsart e.motion Fully automated filter dispenser provides membranes at the touch of a button or hands-free by sensor once it detects approaching tweezers. Sartorius Stedim Specifications: Dimensions (WxDxH): 6 x x 0 Overall width: (incl. holding clips) Dispensing speed: 0.sec Dispensing delay: sec Max. power consumption: 0W Power supply: Optional 0V/0V, /60Hz Weight:.9kg Certificates: CE mark and EMC directive; European Standards EN 08- and -, EN 08- and -, EN 600 Type Microsart e.motion Foot switch for Microsart e.motion Membrane Filters Microsart e.motion The membrane filters suitable for use in the Microsart e.motion are individually Sartorius Stedim sterile-sealed,without protective paper on top of each filter, in a specially designed individual package on a band. For complete traceability, the membrane filter type, diameter, lot number and a unique serial number are printed on the package of each membrane filter unit. Specially developed pore structures of the ìm high Flow membrane filters permit faster filtration based on their high flow rates and throughputs. All Microsart membrane filters are multi-fit and can be used in all standard dispenser systems. The membrane filters have a diameter of 7 or, and are white, green or grey with a high-contrast. grid. Pore Colour Dia. µm High Flow High Flow white/black white/green white/black white/black grey/white grey/white green/dark green green/dark green white/green white/green grey/white grey/white grey/white grey/white Membrane filters Type 00/006, series Cellulose nitrate. Grey membranes (black after wetting) with white grid. For detection of yeasts and moulds, particle analysis and microscopy. Sartorius Stedim Type Other types available on request. Pore Dia. Description µm sterile sterile sterile non-sterile Membrane filters, gridded Type 806 Cellulose nitrate. Sterile, individually packed. Green with dark green grid. Optimal contrast to light or white bacteria colonies when colony counting. Sartorius Stedim 66 Type Pore Dia. µm

111 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Membrane filters-syringe filters Membrane filters, gridded Type 6 and 9H6 Cellulose nitrate. Sterile and individually packed. White with green grid. For the evaluation of microbiological and particle samples. Sartorius Stedim Type 6 6 9H6 9H6 Pore Dia. Description µm 7 Standard Standard High flow High flow Nutrient pads Sterile, dehydrated culture media pads in petri dishes. Once they are moistened with Sartorius Stedim.0ml to.ml of sterile and demineralised (or distilled) water they are ready-to-use iediately. All Nutrient Pad sets are supplied with the appropriate membrane filters, which are also individually sterile packed. Shelf life of the NPS 8 to months at room temperature. Alternative nutrient media are available on request. Type For Colour Pore µm Azide Green / green Endo White / green Caso Green / green Standard TTC Green / green Tergitol TTC White / green Chapman White / green Wort Grey / white 0.6 ECD White / green VLB S7-S White / green Enterococci E. coli + Coliforms Colony count Colony count E. coli + Coliforms Staphylococci Yeasts and moulds E. coli Pediococci and Lactobacilli Caso Colony count Glucose-Tryptone thermophilic spore formers, mesophilic bacteria M-FC E. coli + Coliforms Tomato juice Leuconostocoenos Lysin wild yeasts Sabouraud Yeast + mould Mac Conkey Enterobacteria Cetrimide Pseudomonas Schaufus Pottinger Yeast + mould Yeast extract Colony count *Schaufus Pottinger Yeasts and moulds Weman Mesophilic slime-forming bacteria Bismuth sulphite Salmonellae * also available in.µm (white/green), 0.8µm (grey/white) and 0.6µm (white/green) versions. LLG Syringe filters Green / green White / green White / green Green / green Grey / white Grey / green White / green White / green White / green Green / green White / green Green / green Green / green LLG offer a line of syringe filters especially designed to provide efficient filtration of a broad variety of fluids, solvents, aqueous or inorganic solutions. Our syringe filters cover most applications in HPLC, pharmaceutical, environmental, biotechnology and food and beverage testing laboratories. - Housing injected in Polypropylene or MABS - Multifunctional Syringe filters equipped with Female Luer-Lock/Male Luer Lock or Male Luer Slip connections for different applications - pre-sterilised or non sterile - sterile products in individual hard blister - superior pressure stability - easy to identify because of colour code or printing LLG-Syringe Filters, CA, non sterile Pore Dia. Colour µm blue blue yellow yellow

112 6. Distillation, Separation, Filtration Filtration/Syringe filters GENERAL CATALOGUE EDITION 7 LLG-Syringe Filters, CA, sterile Pore Dia. Colour µm blue blue yellow yellow LLG-Syringe Filters, nylon, non sterile Pore Dia. Colour µm natural natural natural natural LLG-Syringe Filters, RC, non sterile Pore Dia. Colour µm natural natural natural natural LLG-Syringe Filters, PE, non sterile Pore Dia. Colour µm natural natural natural natural Syringe filters, Minisart NML For sterile, particle free, ultrapure filtration of small volumes of liquid up to approx. Sartorius Stedim 00ml. Colour coded pore s for ease of identification. With hydrophilic cellulose acetate membrane for minimum adsorption. Ready-to-use iediately. With female luer-lock inlet, male luer slip outlet. Application: Sterile filtration High purification Ultrafiltration Pre-filtration 0. µm pore µm pore. µm pore µm pore 66 Pore Dia. Colour µm blue blue yellow yellow green green red red brown brown

113 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Syringe filters Syringe filters, Minisart High-Flow Sartorius Minisart high-flow syringe attachment for sterile filtration of solutions across a wide ph range. With asyetric polyethersulfone (PES) membrane for optimum flow performance, high throughput, low adsorption and excellent chemical resistance. Sartorius Stedim Pore Dia. Colour µm aubergine blue blue yellow Syringe filters, Minisart-plus The only difference between the Sartorius Minisart-plus and the standard Minisart NML is Sartorius Stedim an additional glass fibre pre-filter which enables a greater filtration volume for liquids which are difficult to filter. Available sterile, single-wrapped or non-sterile, bulk-wrapped, in outer packs as indicated. Pore Dia. Colour Description µm blue blue yellow yellow sterile non-sterile sterile non-sterile Syringe filters, Minisart GF Sartorius Minisart-GF contains a single, binding agent-free, glass fibre pre-filter for ultrafiltration. Available sterile, single-wrapped or non-sterile, bulk-wrapped, in outer packs as indicated with a support achievement of 99% for 0µm spherical particles. Sartorius Stedim Dia. Colour 6 6 white white Syringe filters, Minisart RC Ready-to-use units with a hydrophilic, solvent-resistant membranes made of regenerated cellulose, making sample preparation quick and easy. Suitable for aqueous/organic solutions. With female luer-lock inlet, male luer slip outlet. Non-sterile. Sartorius Stedim Type Minisart RC Minisart RC Minisart RC Minisart RC Minisart RC Minisart RC Minisart RC Minisart RC Minisart RC Minisart RC Minisart RC Minisart RC Pore Dia. µm Syringe filters, Minisart SRP With a chemical-resistant, hydrophobic PTFE membrane for high purification of solvents or aggressive liquids in HPLC or GC analysis. Low adsorption. With female luer-lock inlet, male luer slip outlet. Non-sterile. Sartorius Stedim Type Minisart SRP Minisart SRP Minisart SRP Minisart SRP Minisart SRP Minisart SRP Pore Dia. µm Minisart SRP and SRP are also available in 0.µm pore s (and sterile). 66

114 6. Distillation, Separation, Filtration Filtration/Syringe filters GENERAL CATALOGUE EDITION 7 In-line filters, Midisart 000 Midisart 000 in-line filters. For sterile ventilation of fermenters, culture vessels, etc. or Sartorius Stedim to act as a water barrier between the suction flask and the vacuum pump in filtration applications. The supported PTFE membrane within a PP housing gives excellent chemical resistance. Filter in either direction ( bar max. pressure). Sterile versions are individually wrapped, and can be autoclaved repeatedly. Pore Dia. µm Syringe filters CHROMAFIL CHROMAFIL filters are available with pore s of 0.µm and µm (exceptions: PET MACHEREY-NAGEL filters have.µm, glass fibre filters have µm) and filter s of, and diameter. The small diameter filters are especially recoended for very small samples, which require extremely low dead volumes. Specifications The membrane housing consists of polypropylene (PP). This material is very resistant towards most solvents and has a very low extractable substances content. Thus it can be used with almost all solvents, acids and bases (see table). The especially thick rim of the housing is ideal for use with laboratory robots (e.g. Benchmate ). Filter inlet and filter outlet can be fitted to the CHROMABOND columns for selective sample preparation with the aid of a special adaptor. All filters can be autoclaved at C and.bar for 0min. Applications A choice of filter membranes made from different materials are available for solving most filtration problems: - Cellulose mixed esters - Cellulose acetate - Regenerated cellulose -Polyamide -PTFE -Polyester - Glass-fibre Syringe filters CHROMAFIL CA Cellulose acetate This membrane features excellent shape stability in aqueous solutions and a very low binding capacity for proteins. MACHEREY-NAGEL Type CA-0 / CA-0 / CA- / CA- / Pore BIG-BOX: / Membrane dia. µm Housing colour top yellow yellow natural natural Housing colour base red red red red We can supply this manufactorer s whole product range! 666

115 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Syringe filters Syringe filters CHROMAFIL General MACHEREY-NAGEL CHROMAFIL syringe filters are used for filtration of suspended matter from liquid samples. Advantages: HPLC-Certification available on the internet Polypropylene housing better solvent stability compared to acrylate and polystyrene filters Shells ultrasonically sealed, not glued no extractable components from glues Filtration in both directions possible, the liquid cannot bypass the membranes Luer lock on side of entry safe connection on the "high pressure" side Luer exit standard luer for and filters, minispike luer with low dead volume and small OD for filters Deflector the stream of liquid is broken and distributed, and does not directly hit the membrane: this prevents rupture of the membrane Star-shaped distribution device the liquid is evenly distributed to the whole membrane surface: this results in a better utilisation of the total area; the filter is not rapidly clogged up; high flow efficiency Colour coded filters with 0.µm pores have a yellow upper housing, for filters with µm pores this is colourless; the different membrane types are distinguished by different colours Low dead volume ~80µl for, µl for, µl for. Further CHROMAFIL filters - please see chapter Chromatography. Syringe filters CHROMAFIL MV, Cellulose mixed ester Cellulose mixed ester This membrane is recoended for all filtrations in aqueous or polar organic samples. MACHEREY-NAGEL Pore Membrane dia. µm BIG-BOX: / Housing colour top yellow yellow colourless colourless Housing colour base yellow yellow yellow yellow Syringe filters CHROMAFIL RC, regenerated cellulose Regenerated cellulose This hydrophilic membrane features very low adsorption. It is recoended for filtration of aqueous and organic/aqueous liquids. MACHEREY-NAGEL Type RC-0 / RC-0 / RC- / RC- / Membrane dia. BIG-BOX: / Pore µm Housing colour top yellow yellow natural natural Housing colour base blue blue blue blue Syringe filters CHROMAFIL PA, Polyamide Polyamide Nylon - this is a rather hydrophilic membrane; it is recoended for filtration of aqueous and organic/aqueous medium polar liquids. MACHEREY-NAGEL Type AO- 0 / AO- 0 / AO- / AO- / Pore BIG-BOX: / Membrane dia. µm Housing colour top yellow yellow natural natural Housing colour base green green green green

116 6. Distillation, Separation, Filtration Filtration/Syringe filters GENERAL CATALOGUE EDITION 7 Syringe filters CHROMAFIL PTFE, Polytetrafluoroethylene Polytetrafluoroethylene MACHEREY-NAGEL A hydrophobic membrane. Ideal for filtration of non-polar liquids and gases. It is very resistant to varous solvents as well as acids and bases. By flushing with alcohol, followed by water, the originally hydrophobic membrane can be made more hydrophilic. Type O-0 / O-0 / BIG-BOX: Pore Membrane dia. µm Housing colour top yellow yellow Housing colour base natural natural Syringe filters CHROMAFIL PET This membrane features outstanding chemical resistance and is suited for polar as well MACHEREY-NAGEL as non-polar solvents. This all-purpose membrane is recoended for filtration of aggressive media, for dust and aerosol analyses, ultrapurification of solvents etc. It is very well suited for TOC/DOC determination. The membrane is not cytotoxic and does not inhibit the growth of microorganisms and cells. Polyester filters with integrated glass fibre prefilters (GF/PET): recoended for solutions with a high load of particulate matter or for highly viscous solutions. MS: Mini tip on the outlet Type PET- 0 / MS PET- / MS PET- 0 / PET- 0 / PET- / PET- / GF / PET- 0 / GF / PET- / Pore BIG-BOX: / Membrane dia. µm /0.0.0/ Housing colour top yellow natural yellow yellow natural natural blue black Housing colour base orange orange orange orange orange orange orange orange Syringe filters CHROMAFIL PES, Polyethersulphone Polyethersulphone MACHEREY-NAGEL Hydrophilic membrane for aqueous and light organic solutions with a low binding capacity for proteins. This membrane has extremely low extractable levels and is ideal for ionic chromatography and organic solutions. Type PES-0 / PES-0 / Pore Membrane dia. µm Housing colour top yellow red Housing colour base amber amber Syringe filters CHROMAFIL GF, glass-fibre Glass-fibre MACHEREY-NAGEL The nominal pore of these filters is µm. They can be used for solutions with high particulate loads or for highly viscous solutions (e.g. soil samples, fermentation broths) either alone or in combination with other CHROMAFIL filters. When membrane filters are combined with glass-fibre filters, they prevent clogging of the membrane. Used alone, glass-fibre filters allow higher flow rates than a µm filter for instance. Type Pore Membrane dia. Housing colour top Housing colour base µm GF-00 /.00 yellow black

117 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Syringe filters Syringe filters for cleaning, non-sterile Autoclavable. Cellulose acetate membrane (CA). Applications: Cleaning of small volumes of iunological reagents, enzymes and antibodies. Nalgene Sample Membrane / Pore Membrane volume housing dia. ml µm to C.A. / PP Syringe filters, non-sterile, Type 76 Autoclavable. Applications: Pre-filtration and ultrafiltration of aqueous solutions, HPLC and GC solvents and DMSO. Nalgene Type Sample volume Membrane / housing Pore Membrane dia. ml µm 0. to Nylon / PP to Nylon / PP Syringe filters, SFCA, sterile Individually blister-packed, colour-coded blue. Applications: Sterile filtration of microbiological media, proteinaceous solutions and tissue culture reagents. Nalgene Sample Membrane / Pore Membrane volume housing dia. ml µm 0 to SFCA / Acrylic Syringe filters, SFCA, sterile Individually blister-packed, colour-coded blue. Applications: Pre-filtration and ultrafiltration of aqueous solutions and alcohols, pre-filtration of serum and other samples containing protein. Note: do not autoclave. Nalgene Sample Membrane / Pore Membrane volume housing dia. ml µm 0 to SFCA / Acrylic Syringe filters to series filtration, sterile Individually blister-packed, colour-coded blue. Areas of application: Pre-filtration, series filtration and ultrafiltration of aqueous solutions, serum and alcohols. Separation of cell residues. Note: do not autoclave. Nalgene Sample Membrane / Pore Membrane volume housing dia. ml µm 0 to C.A. / Acrylic

118 6. Distillation, Separation, Filtration Filtration/Syringe filters GENERAL CATALOGUE EDITION 7 Syringe filters, Type 9, sterile Individually blister-packed. Applications: Sterilization of tissue culture media, ultrafiltration of aqueous solutions, HPLC solvents, alcohols and DMSO. Hydrophilic. Nalgene Type 9 9 Sample volume Membrane / housing Pore Membrane dia. ml µm 0 to Nylon / PP 0 to Nylon / PP Syringe filters, Type 9, non-sterile Colour-coded blue. Applications: Pre-filtration, serial filtration and ultrafiltration of aqueous solutions, serum and alcohols. Removal of cell residues. Nalgene Type Sample volume Membrane / housing Pore Membrane dia. ml µm 0 to SFCA / Acrylic to SFCA / Acrylic 0 to C.A. / Acrylic Syringe filters, non-sterile Autoclavable, colour-coded red. Applications: Cleaning of aqueous solutions, HPLC solutions, alcohols and DMSO. Hydrophilic. Nalgene Sample Membrane / Pore Membrane volume housing dia. ml µm 0 to Nylon / PP Syringe filters, non-sterile Autoclavable, colour-coded black. Applications: Pre-filtration and ultrafiltration of aqueous solutions, HPLC solutions, alcohols and DMSO. Hydrophilic. Nalgene Sample Membrane / Pore Membrane volume housing dia. ml µm 0 to Nylon / PP Syringe filters, Type 99, PTFE, non-sterile Autoclavable, colour-coded black. Applications: Pre-filtration and ultrafiltration of organic solutions and alcohols, sterile filtration of air or other gases. Nalgene Type Sample volume Membrane / housing Pore Membrane dia. ml µm 0 to PTFE / PP to PTFE / PP

119 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Syringe filters Syringe filters, disposable, ReZist - Hydrophobic PTFE-membrane, laminated with polypropylene - first class chemical resistance opposite to coon organic HPLC solvents Application: Filtration of aggressive solutions. GF9 membrane to the prefiltration of loaded solutions. Type PTFE PTFE 0 PTFE-S 0 PTFE 0 PTFE 0 PTFE 0 PTFE 0 PTFE 0 PTFE 0 PTFE 0 PTFE 0/GF9 0/GF9 LLF = luer-lock female LLM = luer-lock male Pore Dia. µm Connection in / out LLF/Mini-Tip LLF/Mini-Tip LLF/LLM LLF/LLM LLF/LLM LLF/LLM LLF/LLM LLF/LLM LLF/LLM LLF/LLM LLF/LLM LLF/LLM LLF/LLM Inorganic membrane syringe filters, Anotop The Anopore inorganic membrane consists of high-purity aluminium oxide and can be used for a wide range of applications. This unique material has a precise, non-deformable, honeycomb structure with a relatively consistent pore that guarantees very efficient particle retention. In addition, the membrane has a low protein binding capacity, minimal autofluorescence, is non-toxic and supports cellular growth. - Anotop 0 Plus/ Plus contains a glass microfiber prefilter - Housing: PP - Extractable materials: low - Inlet connection: Female luer lock - Outlet connection: Male slip luer Housing diameter: 0 Extractable substances: low Retained volume: < 0µl Type Anotop 0 Anotop 0 Anotop 0 Anotop 0 Anotop 0 Anotop 0 Anotop 0 Plus Anotop 0 Plus Anotop 0 Plus Anotop 0 Plus Anotop 0 Plus Anotop 0 Plus Anotop Anotop Anotop Anotop Anotop Anotop Anotop Anotop Plus Anotop Plus Anotop Plus Anotop Plus Anotop Plus Anotop Plus Anotop Plus Pore Description Membrane dia. Residual volume µm ml 0.0 non-sterile non-sterile non-sterile sterile sterile sterile with prefilter with prefilter with prefilter with prefilter, sterile with prefilter, sterile with prefilter, sterile non-sterile non-sterile non-sterile non-sterile sterile sterile sterile with prefilter with prefilter with prefilter with prefilter with prefilter, sterile with prefilter, sterile with prefilter, sterile

120 6. Distillation, Separation, Filtration Filtration/Syringe filters GENERAL CATALOGUE EDITION 7 Ready-to-use filter units, Specifications For the ready-to-use filter units only virgin raw material is used. This ensures that there is no interaction with the sample to be filtered, provided that the units are used properly. The filter units are intended for laboratory use only and at temperatures up to 60 C. Note: If syringes with a volume <0 ml are used, a pressure could be created which exceeds the max. operating pressure (700 kpa/7 bar) of the filter unit. Filters with integral pre-filter have a higher hold-up volume. EtO-sterilized = endotoxin free according to LAL-Test (USPXXIII), Sensitivity: 0.EU/ml. Disposable vacuum filter units FP Housing type A + B: Type: 0 Effective filter area:.7cm² Hold-up volume after air cleaning: µl Inlet: Luer-Lock Inner cone (female) Outlet A: Luer slip cone (male) Outlet B: Luer-Lock outer cone (male) Description Housing FP 0/.0 CN-S FP 00/ CA-S FP 00/0. CA-S FP 0/0.8 CA-S FP 00/0.8 CA FP 00/. CA-S FP 0/. CA FP 00/0. PTFE-S FP 0/.0 CN FP 00/.0 CN FP 00/ CA FP 00/ CA FP 00/0.8 CA FP 0/0. CA FP 00/0. CA FP 0/0. CA FP 00/0. CA-S A A A A A A A A A A A A A A A A B Syringe filters GD/X Whatman GD/X syringe filters are the perfect solution for samples with high viscosity or samples that contain particles. Four filter layers decrease clogging and therefore filter exchange during processing is avoided. These filters allow to 7 times higher throughput than traditional types. diameter. Non-sterile. Pore µm Membrane Nylon Nylon PVDF PVDF RC RC RC RC

121 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Syringe filters Syringe filters, disposable, Spartan range Versatile use - ready-to-use filter units with a hydrophilic, low protein-binding membrane made of regenerated cellulose. First class chemical resistance against the usual aqueous and organic HPLC solvents -Spartan and 0 are tested and certified for UV adsorbance substances at wavelengths of 0nm and nm with water, methanol and acetonitrile; -Spartan has an extremely low hold up volume; <0µl, for optimal filtration Applications: Ideal for HPLC sample preparation to achieve reproducible results. Carefully controlled manufacture guarantees lowest traces of UV- absorbing, extractable components. Type Dia. Pore µm RC 0.0 RC 0.0 RC 0.0 RC 0.0 RC RC RC 0 RC RC RC 0 0 RC 0 0 RC 0 LLF = luer-lock female LM = luer male Connection in / out LLF/LM LLF/LM LLF/Mini-Tip LLF/Mini-Tip LLF/LM LLF/Mini-Tip LLF/Mini-Tip LLF/LM LLF/LM LLF/LM LLF/LM LLF/LM Disposable filtration discs, Polydisc TF Mounted in a robust PP housing. All have a low hold-up volume. Dimensions: (diameter x length) x 6. Connections: For 6 to 0 diameter bore tubing. Also accept male luer slip. - Hydrophobic PTFE membrane - Pore s 0.µm, 0.µm, µm,.0µm - µm pore unit has a PP prefilter - Autoclavable at C for 0 minutes - Maximum operating pressure.0 bar Suitable for chemically aggressive solutions, reagents and organic solvents. Ideal for protective venting, in-line filtration and isolation applications. Non-sterile. Pore µm Puradisc series syringe filters Polysulphone membrane in acrylic housing. Suitable for sterilisation and filtration of tissue culture media, antibody and enzyme solutions and aqueous protein solutions. Sterile filters are individually wrapped. With filter syringe which has a low hold-up volume to provide maximum sample recovery. Connections: female luer lock, male slip luer connector. Filtration capacity up to 00ml. Type Sterile Sterile Non-sterile Non-sterile Pore µm Membrane PES PES PS PS

122 6. Distillation, Separation, Filtration Filtration/Syringe filters GENERAL CATALOGUE EDITION 7 Syringe filters Puradisc For the filtration of sample volumes below ml. High sample recovery is achieved because of the extremely low residual volume, which is very important when dealing with expensive samples. Available with a wide variety of membranes, both sterile and non-sterile. - Housing PP - Filtration area 0.cm² - Max. pressure bar - Residual volume <0µl - Inlet female luer-lock - Outlet luer cone or extended tip - Autoclavable at C Media type Pore Type PVDF PVDF PVDF PVDF w/t PVDF w/t PTFE PTFE Nylon Nylon Nylon µm non sterile sterile non sterile non sterile non sterile non sterile non sterile sterile non sterile sterile Syringe filters Puradisc Membrane with diameter. Media type Pore Type PVDF PVDF PVDF PVDF PVDF w/t PVDF w/t PVDF w/t PTFE PTFE PTFE PTFE PTFE w/t PTFE w/t Polysulphone Polysulphone Polysulphone Polysulphone Polypropylene Polypropylene Nylon Nylon Nylon Glass microfibre media GF/A Glass microfibre media GF/C Glass microfibre media GF/D Glass microfibre media GF/F * Particle retention rating µm *.*.7* 0.7* sterile non-sterile sterile non-sterile sterile non-sterile non-sterile non-sterile non-sterile non-sterile non-sterile non-sterile non-sterile sterile non-sterile sterile non-sterile non-sterile non-sterile sterile non-sterile sterile non-sterile non-sterile non-sterile non-sterile Puradisc NYL series syringe filters Nylon membrane in polypropylene casing. For water and solvent-based HPLC sample filtration. Type Non-sterile Non-sterile Non-sterile Non-sterile Pore µm

123 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Syringe filters Puradisc TF series syringe filters PTFE membrane in polypropylene casing. Suitable for HPLC sample filtration (solvent-based). Ultra-cleaning of organic solvents and aggressive solutions, including acids and alkalis. Type Non-sterile Non-sterile Non-sterile Non-sterile Non-sterile Pore µm Puradisc PP series syringe filters Polypropylene membrane and casing. Suitable for HPLC sample filtration (water-based). Purification of reagents and buffers. Filtration of aggressive water solutions, such as acids and alkalis. Type Non-sterile Non-sterile Non-sterile Non-sterile Pore µm Syringeless filters, Autovial Provides a single disposable, manual pressure filtration system which is fast and easy to use in sample preparation. - Built-in pre-filter for 'difficult' samples - Minimal waste Comprise a graduated, medical grade PP barrel, maximum capacity ml with cm² filter at the base, luer slip outlet and plunger. Non-sterile Membrane PVDF PVDF Nylon PTFE PTFE Pore µm Syringeless filters, UniPrep Comprise a ml capacity, medical grade polypropylene test tube which initially holds the sample, and hollow plunger incorporating a filter at the tip. In use the sample is manually pressure filtered into the plunger which then acts as a storage vial for the filtered sample. The plunger has a removable cap. Non-sterile. Membrane Nylon PTFE Glass microfibre Pore µm

124 6. Distillation, Separation, Filtration Filtration/Syringe filters GENERAL CATALOGUE EDITION 7 Syringeless filters Mini-UniPrep The Whatman Mini-UniPrep filter provides a quick and easy means of removing particles from HPLC samples. In comparison to other methods the amount of time required for sample preparation is reduced to one third. Mini-Uni-Prep is a ready-to-use filter unit consisting of a 0.ml chamber and a plunger. The plunger contains a filtration membrane at one end and a cap with septum at the other. The plunger is pressed through the sample in the chamber. The pressure generated forces the filtrate into the plunger reservoir, with air escaping through the vent hole until the locking mechanism engages to form an airtight seal. The unit can now be placed in any autosampler and the sample analysed. Alternatively the sample can also be removed manually with a suitable syringe and injected into the HPLC instrument. Membrane PTFE RC RC PVDF DpPP GMF Nylon PTFE PP RC RC PVDF Nylon PTFE PP Pore µm Syringeless filters, slit septa Mini-UniPrep Slit septum cap enables Mini-UniPrep use with current robotics on HPLC instruments for high throughput automation Durable yet flexible slit septum cap has been specially designed for instruments with sensitive sampling needs. Sample evaporation is minimal. Membrane PVDF Nylon PTFE Nylon PTFE Pore µm Syringeless filters, amber Mini-UniPrep Amber colorant prevents photo degradation of light sensitive samples. Same colorant used in pharmaceutical containers designed to meet USP specifications for light resistance. Translucent amber chamber and plunger enable easy visual inspection Membrane Nylon PVDF PTFE Pore µm Compressor for Mini-UniPrep syringeless filters The compressor can process up to 6 samples at any one time, further improving sample processing time. Type Compressor Mini-UniPrep

125 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Syringe filters Disposable filtration capsules, Hepa-Cap Laminated hydrophobic glass microfibre filter. - Maximum operating pressure. bar - Wide range of chemical compatibility - High loading capacity and high through-put filtration media % of particles of 0.µm or larger are retained - Autoclavable at up to C for one hour Ideal for the sterilisation of large volumes of air at low pressure. Available in two s, depending upon the volume of air or gas to be filtered. Non-sterile. Supplied singly. Autoclavable. Type Hepa-Cap 6 Hepa-Cap Disposable filtration capsules, Carbon cap For use in pressure lines or vacuum pump exhausts. High-purity polypropylene housing with nozzle for connection to i.d. tubing. Contains highly pure activated charcoal granules and a folded HEPA filter at the base of the unit that retains 99.97% of all particles <0.µm. Type Width Length Carbon cap 7 Carbon cap Disposable filtration capsules, VacuGuard Mounted in a robust PP housing. All have a low hold-up volume. Dimensions: (diameter x length) x 6. Connections: For 6 to 0 diameter bore tubing. Also accept male luer slip. - Hydrophobic PTFE membrane and choice of chemical trap: - Activated carbon with 8000m² filtration area removes organic vapours and radioactive particles - Molecular sieve - removes water from organic and alkaline air streams - Desiccant removes water from acidic air streams % of particulates 0.µm or larger are retained - Maximum operating pressure bar (wet gas)/. bar (dry gas) For vacuum pump protection from corrosive vapours and contaminants. With end connectors for bore tubing. Supplied singly. Description Activated carbon Molecular sieve Desiccant Disposable filtration capsules, Polycap TF Hydrophobic PTFE membrane. - µm capsules incorporate a PP prefilter - Autoclavable up to C maximum For applications involving organic solvents and chemically aggressive solutions. Type Description Porosity µm Polycap 6 TF Polycap 6 TF Polycap 7 TF Polycap 7 TF non-sterile non-sterile non-sterile non-sterile

126 6. Distillation, Separation, Filtration Filtration/Filtration apparatus GENERAL CATALOGUE EDITION 7 Selectron filter holder FP 0/ Selectron filter holder FP 0/ in polysulphone for use with syringes for analytical and preparative use. Filtration-media must be selected separately. Applications: Clarification and sterile filtration of aqueous liquids and gases. Specifications: Max. pressure: 7 bar Max. temperature: 80 C Filter dia.: Type FP 0/ Membrane filter holders, syringe, Type 6 Type 6. PC. Reusable filter holder, without filter. Filter has to be selected separately. For particle removal, sterile filtration of aqueous solutions or for venting of sterile vessels. Autoclavable. With Luer connection. Sartorius Stedim Type Dia Selectron filter holder FP 0/ Application: Selectron filter holders FP 0/ are for sampling and for flow rate applications. Ideal for filtrations using peristaltic pumps and for gas sterilization. Specifications: Max. pressure: 7 bar Max. temperature: 80 C Filter diameter: Type FP 0/ Vacuum manifolds, UniVac series Specially developed for Whatman micro plates. Provides a uniform pressure drop in each well ensuring that no residual liquid remains in the filter plate. UniVac : Single station unit for applications where the filtrate is not used for further analyses and can be drained. With stopcock to control vacuum from an accessory vacuum pump. UniVac : Designed for transferring liquid from the filter microplate to the corresponding well of an accessory collection plate for further analysis. Constructed in PTFE-coated aluminium for resistance to most aggressive solutions (an all PTFE version is also available) and allowing cleaning/sterilisation by coon laboratory methods. With stopcock and gauge for precise and repeatable control of vacuum from an accessory vacuum pump. Type UniVac, polyurethane UniVac, aluminium UniVac, PTFE

127 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Filtration apparatus Filtration microplates, UniFilter Filtration device which is easy to insert and ready to use on 96-well microplate formats. Available in well capacities of µl, 800µl and 000µl. Each well has a filter individually sealed into the base below which runs a unique drip director to accurately deliver the filtrate into the receiving well of an accessory microplate below with no splashing or cross contamination. A wide range of filter media are offered to allow compatibility with a variety of sample types. The plates are made of polystyrene (PS) for general applications with biological samples or glass-fibre reinforced polypropylene (GPP) for organic solutions. The µl plates are mainly used for screening large volumes of biological samples and for protein kinase analysis, receptor binding assays and cell iobilistation. 800µl and 000µl plates are used for high throughput screening sample preparation and clean up. Typical applications include cell-based iunoassay, nucleic acid isolation, sterile filtration of biological samples and compound library generation using parallel synthesis procedures. Supplied in pack quantities as outlined below. Type Capacity Colour Filter media Drip director type UniFilter UniFilter UniFilter UniFilter UniFilter UniFilter UniFilter UniFilter UniFilter UniFilter µl PS / white PS / white PS / white PS / white PS / white PS / white PS / white PS / white PS / white PS / white GF/B GF/C (hydrophobic) GF/C P8 GF/B GF/C (hydrophobic) GF/C P8 PVDF µm (hydrophilic) PVDF µm (hydrophobic) Mesh Mesh Mesh Mesh Short Short Short Short Short Short Filter crucibles, borosilicate glass. Borosilicate glass.. With sintered disc filter as outlined below. Capacity Porosity ml Filter crucibles, DURAN With sintered glass filter disc at base, as outlined below. Glass Type I/neutral glass as per USP, EP and JP. Autoclavable. DURAN Group Capacity Porosity Dia. ml Adapters for filter crucibles, borosilicate glass.. Borosilicate glass.. Dia. Stem dia

128 6. Distillation, Separation, Filtration Filtration/Filtration apparatus GENERAL CATALOGUE EDITION 7 Adapters, Filter Crucible, Duran Glass Type I/neutral glass as per USP, EP and JP. Autoclavable. DURAN Group Dia. Height Filter holders, DURAN DURAN. Dismountable, modular filter holders with screwthreaded top manifold, PP DURAN Group funnel outlet and two FKM seals. Accessory sintered filter discs (9.0 9 to 9.0 9) are screwed in between two FKM seals. The filter discs are easy to replace. Membrane or paper filters can be stretched across the disc. Filter plates must be ordered separately. Capacity Plate dia. Thread dia. ml Filter holders, glass, top manifold only, DURAN DURAN. For use in dismountable filter holders. With screwthread, without PP outlet funnel, filter disc or FKM rubber seals. DURAN Group Capacity ml Thread dia Filter holders, outlet funnels, PP PP. For use with dismountable filter holders. With screwthread to fit respective top manifold. Without manifold, sintered filter disc or FKM rubber seals. DURAN Group Neck thread GL 8 9 Thread dia FKM seals For use in dismountable filter holders. Without PP outlet funnel, filter disc or top manifold. DURAN Group For dia

129 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Filtration apparatus Filter holders, glass, sintered discs Sintered filter discs with glass rim. For use in dismountable filter holders. Patented design. Filter discs must always be screwed in between two FKM rubber seals. Without top manifold, PP outlet funnel or seals. DURAN Group Plate dia. Porosity Slotted sieve disc (perforated plate) DURAN Can be used in the ml capacity dismountable filter holder as a carrier for membrane and paper filters DURAN Group Plate dia Filter funnels, Borosilicate glass. Borosilicate glass., with sintered disc filter as outlined below. Capacity Porosity Dia. Stem dia. ml

130 6. Distillation, Separation, Filtration Filtration/Filtration apparatus GENERAL CATALOGUE EDITION 7 Filter funnels, glass DURAN Glass Type I/neutral glass as per USP, EP and JP. Autoclavable. DURAN Group Capacity Porosity Dia. Stem Height dia. ml Filter funnels, conical, borosilicate glass. Capacity Porosity Dia. Int. dia. Stem dia. ml Filter funnels, glass DURAN, conical Conical. Glass Type I/neutral glass as per USP, EP and JP. Autoclavable. DURAN Group Capacity: Diameter: Plate diameter: Stem diameter: Height: 8 00 Type Porosity 9D 9D Slotted sieve filter funnels (Buchner funnels), DURAN Buchner pattern funnel with slotted sieve (perforated) filter plate. Glass Type I/neutral glass as per USP, EP and JP. Autoclavable. DURAN Group Capacity Dia. Height Stem dia. ml

131 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Filtration apparatus Buchner funnels, porcelain To DIN. Haldenwanger For filter Ø Capacity ml 7* * supplementary to DIN Filter funnels, PP, Buchner PP. Two-piece construction. Top and bottom sections can be separated. Easy to clean. Kartell For filter Ø Capacity, ml Discs for filter funnels, Buchner, PE-HD Useful interface layer between filter paper and perforated Buchner plate. Avoids clogging of filter holes. Kartell Dia Rubber sleeves, EPDM For filter crucibles. Temperature resistant up to C. Autoclavable. DURAN Group Dia

132 6. Distillation, Separation, Filtration Filtration/Filtration apparatus GENERAL CATALOGUE EDITION 7 Protective collars, EPDM. For filter flasks. Special design centres the funnel and flask and provides stable support for funnels, filters and manifolds placed on them. A clean seal is made between the flask rim and container placed on it. Application of the vacuum provides a tight seal. Also provides all-round protection for glass filter flask rims, significantly reducing impact damage and extending working life. Dia. Height For bottles ml 00, , , Filter rings, rubber Natural rubber (NR). To hold filter funnels or crucibles. LLG Ø A Ø B Ø C Ø D Ø E Height Gaskets Grey, filter gaskets made of natural rubber (NR). Conical, to fit filter funnels or crucibles into suction flasks. Top dia. Bottom dia. Height Wall thickness Filter flasks, glass DURAN DURAN Group Capacity Dia. Neck Height dia. ml Set of filter crucible cones, Guko Comprises of 8 Gukos in s to 89 external diameter. Type 68 Guko set

133 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Filtration apparatus Filter flasks, glass DURAN DIN 76. ISO 66. Erlenmeyer shape. Heavy wall, for vacuum use. With ground 7./6 socket for vacuum tubing with to 8 external diameter. These filtering flasks fulfil the regulations of the equipment and product safety regulations. DURAN Group Capacity Dia. Neck Height dia. ml Filter flasks, glass Borosilicate glass. with thick walls according to ISO 66 and DIN 76 standards. Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing. Capacity, 00 to 000 ml: Erlenmeyer shape Capacity, 000 to 0000 ml: Bottle shape Isolab Capacity Description ml flask with glass side arm flask with glass side arm flask with glass side arm flask with glass side arm flask with glass side arm flask with PP side arm flask with PP side arm flask with PP side arm flask with PP side arm flask with PP side arm Filter flasks, glass DURAN DIN 76. ISO 66. With PBT tubing connection and silicone (VMQ) seal. Heavy wall for vacuum use. These filtering flasks fulfil the regulations of the equipment and product safety regulations. DURAN Group Capacity, 00ml to 000ml: Capacity, 000 to 0000 ml: Erlenmeyer shape Bottle shape Capacity Dia. Neck Height dia. ml Assembly set, KECK For attaching flexible vacuum tubing to filter flasks. Consists of straight PP tubing connection, PP tubulature made of silicone (VMQ) rubber seal. PP components can withstand temperatures up to 0 C for short periods without mechanical load. DURAN Group Type Assembly set, Keck

134 6. Distillation, Separation, Filtration Filtration/Filtration apparatus GENERAL CATALOGUE EDITION 7 Replacement seal Silicone rubber (VMQ). For PP Olive. DURAN Group Type Replacement seal Filter flask DURAN Witt-pattern. Complete with interchangeable, flat-ground jointed, tube lid with cone, and plastic flexible tubing connection on one side. DURAN Group DN Height Lid /0 / Filtration microplates, UniFilter 800 UniFilter 800, well capacity: 800µl. Drip director type long. Type Capacity Colour Filter media µl UniFilter PS / transparent GF/B UniFilter PS / transparent GF/C UniFilter PS / transparent GF/D UniFilter PS / transparent GF/F UniFilter PS / transparent CA µm Filtration microplates, UniFilter 000 UniFilter 000, well capacity: 000µl. Drip director type long. Type Capacity Filter media µl UniFilter GF/B UniFilter GF/C UniFilter GF/C (hydrophobic) UniFilter GF/D UniFilter GF/F Other versions available Pressure filtration equipment, MD /, stainless steel For membrane filters diameter, prefilters diameter. For In-line filtration/sterilisation of up to several litres of liquid. Pressure-resistant up to 0 bar (using PTFE O-ring up to bar only). Type without sample cylinder with 00 ml sample cylinder

135 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Filtration apparatus Pressure filter holder, stainless steel For 7 diameter membrane filters. With reservoir barrel allowing up to 00ml of Sartorius Stedim liquid to be filtered by connection to a suitable direct pressure source. Can also be used for filtering larger volumes in conjunction with a L pressurising container. Complete with silicone O-rings and 0 diameter tubing ferrules on the inlet and outlets. For sterile filtration of tissue cultures, ultrafiltration of buffer solutions, cell count solutions and for pressing soil samples. Type Capacity Filter ml Pressure filter holder 00 Ø Pressure filtration units Sartolab P 0. For sterile filtration of cell culture media. Ready-to-use, disposable filtration units. Surfactant-free, 0.µm cellulose acetate membrane with minimal protein adsorption. With Luer lock inlet and filling bell on the outlet. Sartorius Stedim Sartolab P 0 plus. With additional, binding agent-free, glass-fibre pre-filter for media which are difficult to filter. Type Sartolab P 0 Sartolab P 0 plus Filter units, Sartolab RF Sterile filter units with receiver for sterile filtration of aqueous solutions and media, Sartorius Stedim particularly cell culture. Simple and safe to handle. The integral polyethersulfone (PES) membrane guarantees extremely good throughput times and low protein binding, making it ideal for filtering proteinaceous solutions. The receiver is supplied with a flexible vacuum tubing adapter and a lid. Type Capacity Pore ml µm Sartolab RF 0. Sartolab RF 0. Sartolab RF Sartolab RF Bottle-top filters, Sartolab BT Sterile vacuum filters for screwing directly onto sterile bottles. Disposable units for sterile Sartorius Stedim filtration of media and aqueous solutions. The special polyethersulphone (PES) membrane produces extremely good throughput times and low protein binding, making it ideal for cell culture applications. With GL screw connection for all standard bottles. Caution: Only use sterile bottles authorised for use in low pressure applications. Type Capacity Pore ml µm Sartolab BT 0. Sartolab BT Sartolab BT

136 6. Distillation, Separation, Filtration Filtration/Filtration apparatus GENERAL CATALOGUE EDITION 7 Vacuum or pressure filtration apparatus, Typ 6, PC For vacuum or pressure filtration up to bar. For ultra or sterile filtration. With collecting bottle ml. For filter 7 diameter filters. Sartorius Stedim Type Capacity Filter ml PC filtration apparatus Ø Filter holders, glass, Type 6 Two compact, glass vacuum filter holders for simple particle testing and clarification of solutions. With glass frit membrane filter support and anodised aluminium clamp. Sartorius Stedim Type Capacity For Filter ml glass frit 0 dia. glass frit 7/ dia Filter holders, Type 609 For vacuum filtration of particles from solutions. Comprises ml, dismountable, top Sartorius Stedim manifold with filter holder and clamp. For 7 and diameter filters. Supplied complete with L capacity filter flask with ground joint to fit manifold and PP side-arm for safe connection of flexible vacuum tubing. Type Capacity Filter ml All-glass unit Ø Accessories for Sartorius pressure filtration equipment Sartorius Stedim Description Coupling M x with G /8 male thread Diaphragm pump, pressurizing, G /8 male screwthread connection, for 0V, Hz supplies Tripod for pressure filtration apparatus 9.60 Double-ended box spanner for tripod Stainless steel forceps Further designs available on request

137 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Filtration apparatus Vacuum filtration equipment, GV 0 series - funnel volume 60ml - for filter diameter Type Filter media Connection GV 0/0 GV 0/ GV 0/ glass frit sieve glass frit rubber stopper rubber stopper TC*, EF* ml (NS 9) *TC = tubing connection **EF = Erlenmeyer flask Vacuum Filtration Equipment GV 0 Series - Funnel Volume ml - to be used with Ø 7/ membranes and Ø 0 pre-filter - silicone cap and venting nozzle included in scope of supply - GV 0A-Types equipped with rapid closure clamp Type Filter media Connection GV 0/0 GV 0/ GV 0/ GV 0/ *TC = tubing connection **EF = Erlenmeyer flask glass frit sieve glass frit sieve rubber stopper rubber stopper TC*, EF** 000 ml (NS ) TC*, EF** 000 ml (NS ) Vacuum filtration Equipment Grade MV 0/0 Stainless steel construction, chemically resistant to most aqueous and organic solutions. - funnel volume ml - for filters with 7 / diameter and 0 diameter prefilter Self sealing, ideal for quick, repeated filtrations Type MV 0A/0* MV 0/0 *With rapid closure clamp

138 6. Distillation, Separation, Filtration Filtration/Filtration apparatus GENERAL CATALOGUE EDITION 7 Microbiological monitoring of water: MBS I system and membranes The MBS I filtration system is designed for laboratories that handle high numbers of samples for microbiological quality control. It consists of a membrane dispenser, a funnel dispenser, and a -place filter AS0 manifold. AS0 Filtration Manifold and Filtration funnels AS0 is a two-place stainless-steel filtration manifold, which can be joined together (maximum of manifolds).this simple manifold can be used with 7 or filtration membranes. AS0 Filtration Manifold and Filtration funnels deliver:- Waste reduction-because PP funnels can be autoclaved up to 0 times - Time saving-no need to flame in between filtrations - Easy handing - Cost saving-0 PP funnels are enough for 000 analyses - Reduces cross-contamination Description -place vacuum manifold AS 0 Automatic dispenser for funnels Funnels 00 ml, PP, autoclavable Funnels 00 ml, ABS, not autoclavable Funnels ml, PP, autoclavable Membrane-Butler electric Autoclaving bags Mountig for two Membrane-Butler ES Membran-Butler manual Whatman Klari-Flex Bottle-Top Filtration System Designed specifically to improve productivity, the Klari-Flex system includes a stable, low-profile pedestal base with a permanent vacuum hose connection. This feature eliminates a time-consuming and inconvenient step in your process connecting and disconnecting the vacuum to each filter unit. With Klari-Flex, connect the vacuum once to the base. Each time a new filtration unit is placed on the base, Drop-Connect Technology ensures that the vacuum connection is automatic. As options, the Klari-Flex system includes a cradle ring, so you can achieve the same permanent vacuum hose connection using a typical laboratory stand. Or simply use it with the adapter for conventional bottle top filtration. With Drop-Connect Technology, the filtration unit can be quickly and accurately placed into the base with just one hand. Removing the unit is just as easy. From the unique vacuum connection to the weighted pedestal base to the tip-resistant bottle, the ergonomic design makes the Klari-Flex system easy-to-use, maximises throughput and minimises the risk of spills and contamination. - Improves productivity - Easy to use - Minimises risk of spills and contamination Description ml funnel and bottle, sterile 0 ml funnel and bottle, sterile 000 ml funnel and bottle, sterile ml funnel and bottle, sterile 0 ml funnel and bottle, sterile 000 ml funnel and bottle, sterile ml funnel, sterile 0 ml funnel, sterile 000 ml funnel, sterile ml funnel, sterile 0 ml funnel, sterile 000 ml funnel, sterile ml bottle, sterile 0 ml bottle, sterile 000 ml bottle, sterile Cradle ring Pedestral stand Pore µm 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, Membrane PES PES PES PES PES PES PES PES PES PES PES PES

139 GENERAL CATALOGUE EDITION 7 Exhaust Device, borosilicate - Filter mountings, 00 ml, with thread - PP funnels with thread - Slotted sieve plate with gaskets - Stainless steel rack - Water jet pump 6. Distillation, Separation, Filtration Filtration/Filtration apparatus Behr i.e. for the determination of the raw fiber content according to EN ISO 686 Type Description FU FU 6 Filtration unit, places Filtration unit, 6 places Filter manifold systems, - and 6-place For colony counting when using large number of samples. Available with either 00ml or 0ml funnels. Sartorius Stedim Note: Stainless steel manifolds only (Combisart) without funnels, for use with suitable adapters, are also available for attachment to all Sartorius vacuum funnels. Type Dia. Capacity -way stainless steel manifold 6-way stainless steel manifold -way stainless steel manifold 6-way stainless steel manifold ml x 00 6 x 00 x 0 6 x Stainless steel filter manifold system Combisart Multibranch System with modular structure: For microbiological analysis. Basic system without outlet for holding all dismountable Sartorius vacuum funnels either completely or by using appropriate adapters Sartorius Stedim Description -place s/s manifold with sterile venting 6-place s/s manifold with sterile venting Funnel, 00 ml Funnel, 0 ml Lid, stainless steel for 00ml funnel Lid, stainless steel for 0ml funnel Silicone lid seal for 00ml funnel Silicone lid seal for 0ml funnel Base support, stainless steel for mounting a single funnel onto a manifold Filter holders, vacuum, Type 6. Stainless steel Specially designed for residue analysis. The stainless steel filter support produces homogeneous distribution of the residues on the membrane filter surface. Easy to use. For 7 or diameter filters. Sartorius Stedim Type Vacuum filter holder, 0ml Vacuum filter holder, 00ml

140 6. Distillation, Separation, Filtration Filtration/Filtration apparatus GENERAL CATALOGUE EDITION 7 Biosart 00 monitors Filtration unit for use with a Sartorius vacuum manifold or direct attachment to a special Sartorius Stedim vacuum pump. Biosart 00 Monitors have been specifically designed for the microbiological testing of pharmaceuticals, food, beverages, water and other liquids. These sterile disposable units with built-in membrane filter and cellulose pad are ready to use. After filtration, just remove the 00ml funnel to convert the Monitor into a petri dish. Culture media for wetting the pad are available in individually sterilised, convenient plastic ampoules. Biosart 00 Monitors are ready to use filter units designed to fitted onto the receivers of a vacuum manifold. For use with Biosart 00 culture media. Type Dia. Pore µm K 7 K 7 ACK Sterile, individually packed ACK Sterile, individually packed 7 ACK Sterile, individually packed 7 ACK Sterile, individually packed 7 Adapter for BioSart ACK= individually sterile packed. K= sterile. Filter funnel, Biosart Colour White / Black Grey / White White / Black White / Black Green / Dark green Grey / White - For microbiological and analytical quality assurance in industry. ml sterile plastic funnels reduce process time in colony and particle analysis. For use with Sartorius membrane filters and Sartorius cardboard culture plates. Note: BioSart funnels can also be adapted to fit single filter holders or filtration manifolds Sartorius Stedim Type BioSart disposable funnel, sterile BioSart disposable funnel, sterile, individually packed Filter Unit Receivers MF7 series Type, PS, sterile Easy-to-use ergonomic design. Can be used to store sterilised filtrate. Radiation-sterilised Nalgene to save you time and minimize contamination. Also handy as presterilised, single-use storage containers. -/-turn threaded screw closure guarantees a leakproof seal and eliminates ph shift in receivers. Certified. Non pyrogenic, non cytotoxic. Sterile, graduated and leakproof. Type Capacity ml

141 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Filtration apparatus Filter units with Supor machv PES Membrane, MF7 Series, Type 6, sterile Ideal for biological and pharmaceutical sterile filtration. PES membrane features low Nalgene protein binding, low level of extractables and a high flow rate. Now available in three pore s: The best filter units with 0.0µm and µm pore and new to the protection of valuable cell cultures from mycoplasma with 0.0µm pore. Filter top and filtrate bottle are graduated. Vacuum tubing to be connected onto tubing adapter of side arm. Leakproof, sterile screw closure included for storage of sterile filtrate. Sterile, single packed. Certificate of Quality included in each full case. Lot number, catalogue number, membrane type, pore and expiration date are printed on filter units, bottle tops and receivers for easy identification and lot traceability. Type Capacity Pore Membrane dia. ml µm Filter Unit with PES-Membrane, Low Profile, sterile Polyethersulfone-membrane (PES) The ultimate cell and tissue culture media membrane. Nalgene - Graduated - Lot number, catalogue number, membrane type, pore and expiration date are printed on filter units, bottle tops and receivers for easy identification and lot traceability - Ideal for sterilisation of biological and pharmaceutical sterile solutions - Low protein binding, low extractables, no external wetting agents, fast flow Capacity Pore Membrane dia. ml µm Bottle-Top-Filter MF7 with Supor machv PES-Membrane, Type 9, 96, sterile Filters securely screw onto glass media bottles with or neck s. Allows Nalgene direct filtration of liquid into sterile glass media bottles. Tight and secure thread connection for vacuum filtration, vacuum tubing to be connected onto tubing adapter of side-arm. Graduated. Sterile, single packed. Certificate of Quality included in each full case. Lot number, catalogue number, membrane type, pore and expiration date are printed on filter units, bottle tops and receivers for easy identification and lot traceability Type Capacity Pore Neck thread Membrane dia. ml µm GL Filter unit bodies, Type 00 Graduated reusable filtration unit bodies with upper manifolds and lower receivers made of unbreakable polysulphone (PSF). Nominal filtration surface cm². With membrane support plate. Without membrane. For filter membrane from 7 to. Nalgene Type Manifold capacity Receiver capacity Dia. Height ml ml

142 6. Distillation, Separation, Filtration Filtration/Filtration apparatus GENERAL CATALOGUE EDITION 7 Vacuum filtration devices bottle-top filters, Type DS00, PSU Reusable, PSU filter manifolds for fitting onto bottles with or screw neck diameters. Non-toxic. Robust body with removable membrane support plate. Suitable for pressure filtration up to 600mbar and vacuum filtration. With seal, cap and tubing adapter on lower half of the assembly. Autoclavable. Without membrane (7 or diameter can be fitted). Nalgene Type Capacity Neck thread ml GL DS00 DS00 DS00 DS Bottle Top Filters with Supor machv PES-Membrane, MF7 series, sterile, Type 9 Filters securely screw onto glass media bottles with or neck s. Allows Nalgene direct filtration of liquid into sterile glass media bottles. Tight and secure thread connection for vacuum filtration, vacuum tubing to be connected onto tubing adapter of sidearm. Graduated. Certificate of quality included in each full case. Lot number, catalogue number, membrane type, pore and expiration date are printed on filter units, bottle tops and receivers for easy identification and lot traceability. Type Capacity Neck thread Pore Membrane dia. ml GL µm Filter units, disposable, SFCA-membrane Single-use, disposable filter units for sterile filtration of media and other reagents, and Nalgene for other highly sensitive cell culture lines. With polystyrene (PS) upper and lower chambers and surfactant-free, cellulose acetate membranes. Colour code: yellow collar. For cell culture. Gaairradiated sterile. Low protein binding, with high throughput rate for proteinaceous solutions and minimal extractables content. Lot number, catalogue number, membrane type, pore and expiration date are printed on filter units, bottle tops and receivers for easy identification and lot traceability. Capacity Pore Membrane dia. ml µm

143 GENERAL CATALOGUE EDITION 7 6. Distillation, Separation, Filtration Filtration/Filtration apparatus Filter units, disposable, cellulose nitrate membrane White, cellulose nitrate membrane. Colour code: green. Highest throughput rate for Nalgene water and aqueous solutions, low extractables content. Surfactant-free. Lot number, catalogue number, membrane type, pore and expiration date are printed on filter units, bottle tops and receivers for easy identification and lot traceability. Capacity Pore Membrane dia. ml µm Grid without green without green black without green black without green black without green black Filter units, PS, disposable, Type,,,, 6, nylon membrane Single-use, disposable filter units for sterile filtration of media and other reagents, and Nalgene for other highly sensitive cell culture lines. With polystyrene (PS) upper and lower chambers and nylon membrane. Colour code: red. For cell culture. Gaa-irradiated sterile. Extremely low in extractable substances, no wetting agents. Lot number, catalogue number, membrane type, pore and expiration date are printed on filter units, bottle tops and receivers for easy identification and lot traceability. Type Capacity Pore Membrane dia. ml µm Bottle-top filters, SFCA membrane, Nalgene Tissue culture filters for screw fitting onto bottles with or neck diameters. Nalgene With surfactant-free, cellulose acetate membrane (SFCA) and polystyrene (PS) housing. Gaa-irradiated sterile. Pyrogen free. Non cytotoxic. Low-pressure filtration can be carried out directly into a suitable sterile bottle. Caution: Only use sterile bottles authorised for use in low pressure applications. Always wear protective equipment for low pressure procedures. The membrane is characterised by its low protein binding, good throughput rates and minimal clogging with negligible protein loss. Permanent, moulded graduations. Quick-disconnection tubing adaptor with cellulosic vent plug for tubing with an internal diameter of 6 to 9. Lot number, catalogue number, membrane type, pore and expiration date are printed on filter units, bottle tops and receivers for easy identification and lot traceability. Capacity Neck thread Pore Membrane dia. ml GL µm

144 6. Distillation, Separation, Filtration Filtration/Filtration apparatus GENERAL CATALOGUE EDITION 7 Bottle-Top-Filter FastCap with PES-Membrane, sterile Large-Volume Bottle Top Filter, blue PS housing. FastCap Bottle Top Filters universal fit eliminates the need to screw them onto glass media bottles. Filters up to L. just place on bottle mouth, apply vacuum and start filtering. Fits bottle necks up to. Nalgene Pore Dia. µm Conical Filter Unit with PES-Membrane, sterile Polystyrene housing, 0.µm Supor machv PES membrane. The optimal choice for small Nalgene volume tissue culture work. Offers clean, fast filtration of 0ml to ml of media or buffers using the Pall Supor machv PES membrane. This low protein binding unit is non-cytotoxic and non-pyrogenic. Comes assembled with ml conical tube and a separate closure. Includes reusable stands in each case. Certified and graduated. Lot number, catalogue number, membrane type, pore and expiration date are printed on it. Capacity Pore Dia. ml µm