LED TV user manual. imagine the possibilities

Transcription

1 Contact SAMSUNG WORLDWIDE If you have any quetion or comment relating to Samung product, pleae contact the SAMSUNG cutomer care center. Country Cutomer Care Center Web Site Addre CANADA SAMSUNG ( ) Samung Electronic Canada Inc., Cutomer Service 55 Standih Court Miiauga, Ontario L5R 4B2 Canada MEXICO SAMSUNG ( ) C.P AV. Preidente Maaryk No.111, Int. 701 Col. Chapultepec Morale, Delegacion Miguel Hidalgo Mexico D.F U.S.A SAMSUNG ( ) Samung Electronic America, Inc. 105 Challenger Road Ridgefield Park, NJ LED TV uer manual imagine the poibilitie Thank you for purchaing thi Samung product. To receive more complete ervice, pleae regiter your product at Model Serial No Samung Electronic Co., Ltd. All right reerved. BN D-00

2 Figure and illutration in thi Uer Manual are provided for reference only and may differ from actual product appearance. Product deign and pecification may be changed without notice. Important Warranty Information Regarding Televiion Format Viewing See the warranty card for more information on warranty term. Wide creen format LED Diplay (16:9, the apect ratio of the creen width to height) are primarily deigned to view wide creen format full-motion video. The image diplayed on them hould primarily be in the wide creen 16:9 ratio format, or expanded to fill the creen if your model offer thi feature and the image are contantly moving. Diplaying tationary graphic and image on creen, uch a the dark idebar on no expanded tandard format televiion video and programming, hould be limited to no more than 5% of the total televiion viewing per week. Additionally, viewing other tationary image and text uch a tock market report, video game diplay, tation logo, web ite or computer graphic and pattern, hould be limited a decribed above for all televiion. Diplaying tationary image that exceed the above guideline can caue uneven aging of LED Diplay that leave ubtle, but permanent burned-in ghot image in the LED picture. To avoid thi, vary the programming and image, and primarily diplay full creen moving image, not tationary pattern or dark bar. On LED model that offer picture izing feature, ue thee control to view different format a a full creen picture. Be careful in the election and duration of televiion format ued for viewing. Uneven LED aging a a reult of format election and ue, a well a burned in image, are not covered by your Samung limited warranty. SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT Subject to the requirement, condition, excluion and limitation of the original Limited Warranty upplied with Samung Electronic (SAMSUNG) product, and the requirement, condition, excluion and limitation contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United State on SAMSUNG product purchaed in Canada, and in Canada on SAMSUNG product purchaed in the United State, for the warranty period originally pecified, and to the Original Purchaer only. The above decribed warranty repair mut be performed by a SAMSUNG Authorized Service Center. Along with thi Statement, the Original Limited Warranty Statement and a dated Bill of Sale a Proof of Purchae mut be preented to the Service Center. Tranportation to and from the Service Center i the reponibility of the purchaer. Condition covered are limited only to manufacturing defect in material or workmanhip, and only thoe encountered in normal ue of the product. Excluded, but not limited to, are any originally pecified proviion for, in-home or on-ite ervice, minimum or maximum repair time, exchange or replacement, acceorie, option, upgrade, or conumable. For the location of a SAMSUNG Authorized Service Center, pleae call toll-free: In the United State : SAMSUNG ( ) In Canada : SAMSUNG Still image warning Avoid diplaying till image (uch a jpeg picture file) or till image element (uch a TV channel logo, panorama or 4:3 image format, tock or new bar at creen bottom etc.) on the creen. Contant diplaying of till picture can caue uneven wear of the creen, which will affect image quality. To reduce rik of thi effect, pleae follow below recommendation: Avoid diplaying the ame TV channel for long period. Alway try to diplay a full creen image. Reducing brightne and contrat will help to avoid the appearance of after-image. Ue all TV feature deigned to reduce image retention and creen burn, refer to proper uer manual ection for detail. Securing the Intallation Space Keep the required ditance between the product and other object (e.g. wall) to enure proper ventilation. Failing to do o may reult in fire or a problem with the product due to an increae in the internal temperature of the product. When uing a tand or wall-mount, ue part provided by Samung Electronic only. x If you ue part provided by another manufacturer, it may reult in a problem with the product or an injury due to the product falling. The appearance may differ depending on the product. Intallation with a tand. Intallation with a wall-mount. 4 inche 4 inche 4 inche 4 inche 4 inche 4 inche 4 inche 2

3 Content Getting Started y Lit of Feature... 4 y Acceorie... 4 y Intall the Stand... 5 y Viewing the Control Panel... 7 y Viewing the Remote Control... 8 y Connecting to an Antenna... 9 y Plug & Play (Initial Setup)... 9 Connection y Connecting to an AV Device y Connecting to an Audio Device y Connecting to a PC y Changing the Input Source Baic Feature y How to Navigate Menu y Channel Menu Seeing Channel 14 Uing Favorite Channel 14 Memorizing Channel 14 Editing Channel 15 Other Feature 15 y Picture Menu Changing the Preet Picture Mode 16 Adjuting Picture Setting 16 Economical Solution 16 Changing the Picture Option 16 Setting up the TV with Your PC 18 y Sound Menu Changing the Preet Sound Mode 19 Adjuting Sound Setting 19 Sound Setting 19 y Setup Menu Setting the Time 20 Uing the Sleep Timer 20 Setting the On / Off Timer 21 Locking Program 21 Other Feature 22 Picture In Picture (PIP) 24 y Support Menu Advanced Feature y Network Connection Connecting to a Wired Network 26 Connecting to a Wirele Network 28 y Media Play Connecting a USB Device 32 Connecting to your PC through a network 32 Screen Diplay 34 Playing Multiple File 37 Media Play - Additional Function 37 y Anynet Setting Up Anynet+ 40 Switching between Anynet+ Device 40 Recording 40 Litening through a Receiver 41 Troublehooting for Anynet+ 41 y Internet@TV Getting Started with Internet@TV 42 Setting up Internet@TV 43 Uing the Internet@TV ervice 45 PROFILE Widget 47 Widget Gallery 47 Help Webite 48 y AllShare About AllShare 49 Setting Up AllShare 49 Other Information y Aembling the Cable y Intalling the Wall Mount y Anti-theft Kenington Lock y Securing the TV to the Wall y Troublehooting Licene 57 y Specification y Dimenion y Index ENGLISH Check the Symbol! t TOOLS Thi function can be ued by preing the TOOLS button on the remote control. Note Indicate additional information. Step by Step Guide Check here for intruction on how to open the relevant ubmenu within the OSD (on creen diplay). 3

4 Getting Started Lit of Feature y Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonubcription HD broadcat can be viewed without a cable box / STB (Set-Top-Box) atellite receiver. y Media Play: Allow you to play muic file, picture and movie aved on a USB device (p. 32). y Internet@TV: You can ue variou internet ervice and view ueful information and entertaining content (p. 42). y AllShare: AllShare connect your TV and compatible Samung mobile phone/device through a network (p. 49). y Self Diagnoi: You can check to make ure picture and ound operate normally (p. 24). Acceorie Pleae make ure the following item are included with your LED TV. If any item are miing, contact your dealer. The item' color and hape may vary depending on the model. y Remote Control (BN A) & Batterie (AAA x 2) y Owner Intruction y Warranty Card / Safety Guide / Quick Setup Guide y Cleaning Cloth (BN B) y Power Cord (M4 X L8) (M8 X L19) Blanking Bracket & Screw (1EA) TV-Holder & Screw (1EA) Cable Tie Holder-Ring (4EA) (BN A) (BN B) (BN A) (BN A) Holder-Wire tand Holder-Wire (3EA) Power Cord Clamp (BN A) (BN A) (AA A) For bet cable connection to thi product, be ure to ue cable with a maximum thickne a below: y Maximum thickne inche (14mm) Input Cable (Sold Separately) HDMI HDMI-DVI Component Compoite (AV) Coaxial (RF) VGA 4

5 UN40C6400 / UN46C6400 / UN55C6400 See eparate guide for intalling the tand. Intall the Stand (A) 5EA (M4 X L12) 01 Getting Started (B) 5EA (M4 X L8) Stand (1EA) Guide Stand (1EA) Screw (10EA) Follow the tep below to connect the TV to the tand. Screw (M4 X L12) Top view Guide Stand Stand Front Rear Rear 1. Connect the Guide Stand to the Stand uing five crew (M4 X L12) a hown. 2 Screw (M4 X L8) 1 2. With your TV upright, connect the TV to the Stand a hown. 3. Faten two crew (M4 X L8) at poition 1, and then faten three crew (M4 X L8) at poition 2. NOTE x x x Make ure to ditinguih between the front and back of the Stand and Guide Stand when aembling them. Make ure that at leat two peron lift and move the LED TV. Stand the product up and faten the crew. If you faten the crew with the LED TV placed down, it may lean to one ide. 5

6 Getting Started UN32C6500 / UN40C6500 / UN46C6500 / UN55C6500 See eparate guide for intalling the tand. (M4 X L8) Stand (1EA) Guide Stand (1EA) Screw (9EA) Follow the tep below to connect the TV to the tand. Screw (M4 X L8) Top view Guide Stand Stand Rear 1. Connect the Guide Stand to the Stand uing four crew (M4 X L8) a hown. 2 Screw (M4 X L8) 1 2. With your TV upright, connect the TV to the Stand a hown. 3. Faten two crew (M4 X L8) at poition 1, and then faten three crew (M4 X L8) at poition 2. NOTE x x x Make ure to ditinguih between the front and back of the Stand and Guide Stand when aembling them. Make ure that at leat two peron lift and move the LED TV. Stand the product up and faten the crew. If you faten the crew with the LED TV placed down, it may lean to one ide. 6

7 Viewing the Control Panel The product color and hape may vary depending on the model. UN40C6400 / UN46C6400 / UN55C Getting Started Speaker Remote control enor Power Indicator UN32C6500 / UN40C6500 / UN46C6500 / UN55C6500 Speaker Remote control enor / Power Indicator SOURCEE MENU y z Remote control enor Power Indicator P (Power) Toggle between all the available input ource. In the on-creen menu, ue thi button a you would ue the ENTERE button on the remote control. Diplay an on-creen the OSD (on creen diplay) of your TV feature. Adjut the volume. In the OSD, ue the y button a you would ue the and button on the remote control. Change the channel. In the OSD, ue the z button a you would ue the and button on the remote control. Aim the remote control toward thi pot on the TV. Blink and turn off when the power i on and light up in tandby mode. Turn the TV on or off. Standby mode Do not leave your TV in tandby mode for long period of time (when you are away on a holiday, for example). A mall amount of electric power i till conumed even when the power button i turned off. It i bet to unplug the power cord. 7

8 Getting Started Viewing the Remote Control Thi i a pecial remote control for the viually impaired and ha Braille point on the Power, Channel and Volume button. Turn the TV on and off. Diplay and elect the available video ource (p. 13). POWER SOURCE ON/OFF Turn the remote control light on or off. When on, the button become illuminated for a moment when preed. (Uing the remote control with thi button et to off will reduce the battery uage time.) Pre to directly acce channel. Pre to elect additional channel (digital) being broadcated by the ame tation. For example, to elect channel 54-3, pre 54, then pre - and 3. MUTE PRE-CH Return to the previou channel. Cut off the ound temporarily. Change channel. Adjut the volume. Bring up the OSD. Diplay the Content View, which include Channel Lit, Internet@TV, Media Play and AllShare. Quickly elect frequently ued function. Return to the previou menu. CONTENT TOOLS RETURN CH LIST INTERNET INFO EXIT Diplay the channel lit on the creen (p. 14). Link to variou internet ervice (p. 42). Diplay information on the TV creen. Select the on-creen menu item and change the value een on the menu. Exit the menu. Thee button are for the Channel lit, Internet@TV, Media Play menu, etc. Ue thee button in Media Play and Anynet+ (HDMI-CEC) mode (p. 32, 39). ( : Control recording for Samung recorder that have the Anynet+ feature) A B C D MEDIA.P FAV.CH YAHOO! P.SIZE MTS CC MEDIA.P: Diplay Media Play (p. 32). YAHOO!: Run Yahoo widget! (p. 46). MTS: Pre to chooe tereo, mono or Separate Audio Program (SAP broadcat) (p. 19). FAV.CH: Diplay Favorite Channel Lit on the creen (p. 14). P.SIZE: Select the picture ize (p. 17). CC: Control the caption decoder (p. 22). Intalling batterie (Battery ize: AAA) NOTE x Ue the remote control within 23 feet from the TV. x Avoid ue when nearby fluorecent light or neon ign. x The color and hape may vary depending on the model. Bright light may affect the performance of the remote control. 8

9 Connecting to an Antenna When the TV i initially powered on, baic etting proceed automatically. The product color and hape may vary depending on the model. Connecting the power cord and antenna. VHF/UHF Antenna 01 Getting Started Antenna Cable (Not Supplied) or Cable ANT OUT Power Input Plug & Play (Initial Setup) When the TV i initially powered on, a equence of on-creen prompt will ait in configuring baic etting. Pre the POWERP button. Plug & Play i available only when the Input ource i et to TV. To return to the previou tep, pre the Red button Selecting a language Pre the or button, then pre the ENTERE button. Select the POWER deired OSD (On Screen Diplay) language. Selecting Store Demo Pre the or button, then pre the ENTERE button. P or Home Ue y Select the Home Ue mode. Store Demo Mode i for retail environment. y To return the unit etting from Store Demo to Home Ue (tandard): Pre the volume button on the TV. When you ee the volume OSD, pre and hold MENU for 5 ec. Selecting an antenna Pre the or button, then pre the ENTERE button. Select Air, Cable or Auto. Selecting a channel Pre the or button, then pre the ENTERE button. Select the channel ource to memorize. When etting the antenna ource to Cable, a tep appear allowing you to aign numerical value (channel frequencie) to the channel. For more information, refer to Channel Auto Program (p. 14). Pre the ENTERE button at any time to interrupt the memorization proce. Setting the Clock Set the Clock Mode automatically or manually. Mode y Auto: Allow you to elect DST (Daylight Saving Time) mode and time zone. y Manual: Allow you to manually et the current date and time (p. 20). Viewing the HD Connection Guide. y The connection method for the bet HD creen quality i diplayed. Enjoy your TV. Pre the ENTERE button. If You Want to Reet Thi Feature... OO MENUm Setup Plug & Play ENTERE 9

10 W Connection Connecting to an AV Device The product color and hape may vary depending on the model. Uing an HDMI or HDMI/DVI cable: HD connection (up to 1080p) Available device: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) atellite receiver Device HDMI Cable (Not Supplied) HDMI OUT Device HDMI to DVI Cable (Not Supplied) R W DVI OUT Red White W R AUDIO OUT HDMI IN 1(DVI), 2, 3, 4, PC/DVI AUDIO IN x When uing an HDMI/DVI cable connection, you mut ue the HDMI IN 1(DVI) jack for video. A DVD, Blu-ray player, HD cable box, or HD STB atellite receiver may require a DVI-HDMI (DVI to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack i required for audio. x If an external device uch a a DVD / Blu-ray player / HD cable box / HD STB atellite receiver upporting HDMI verion older than 1.3 i connected, the TV may operate abnormally (e.g. no creen diplay / no ound / annoying flicker / abnormal color). x If there i no ound after connecting an HDMI cable, check the HDMI verion of the external device. If you upect the verion i older than 1.3, contact the provider of the device to confirm the HDMI verion and requet an upgrade. x It i recommended you purchae an HDMI-certified cable. Otherwie, the creen may appear blank or a connection error may occur. Uing a Component (up to 1080p) or Audio/Video (480i only) Cable Available device: DVD, Blu-ray player, cable box, STB atellite receiver, VCR Audio Cable (Not Supplied) R-AUDIO-L R W Red White R B G Video Cable (Not Supplied) R W R B G Red Blue Green Y R R W Y Audio Cable (Not Supplied) Component Cable (Not Supplied) Red White Yellow Y R W G B R W R Device VIDEO OUT AUDIO OUT AUDIO OUT COMPONENT OUT Device R-AUDIO-L R-AUDIO-L PR PB Y COMPONENT IN / AV IN: When connecting to AV IN, the color of the AV IN [Y/VIDEO] jack (green) will not match the video cable (yellow). To obtain the bet picture quality, the Component connection i recomended over the A/V connection. 10

11 Connecting to an Audio Device Uing an Optical (Digital) or Audio (Analog) Cable Connection Available device: Digital Audio Sytem, Amplifier, DVD home theater R W 02 Connection Red White Audio Cable (Not Supplied) Amplifier / DVD home theater AUDIO IN R-AUDIO-L Optical Cable (Not Supplied) Digital Audio Sytem OPTICAL DIGITAL AUDIO OUT (OPTICAL) x When a Digital Audio Sytem i connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decreae the volume of both the TV and the ytem. x 5.1 CH (channel) audio i available when the TV i connected to an external device upporting 5.1 CH. x When the receiver (amplifier or DVD home theater) i et to on, you can hear ound output from the TV optical jack. When the TV i receiving a DTV ignal, the TV will end 5.1 CH ound to the amplifier or DVD home theater. When the ource i a digital component uch a a DVD / Blu-ray player / cable box / STB (Set-Top-Box) atellite receiver and i connected to the TV via HDMI, only 2 CH audio will be heard from the amplifier or DVD home theater. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB atellite receiver directly to an amplifier or home theater. AUDIO OUT: Connect to the audio input jack on your amplifier / DVD home theater. x When connecting, ue the appropriate connector. x When an audio amplifier i connected to the AUDIO OUT jack: Decreae the volume of the TV and adjut the volume level with the Amplifier volume control. Uing an EX-Link Cable Connection Available Device: External device that upport EX-Link EX-LINK: Connector for ervice only. 11

12 Connection Connecting to a PC Uing an HDMI/DVI Cable or a D-ub Cable HDMI to DVI Cable (Not Supplied) PC OUT AUDIO OUT Audio Cable (Not Supplied) AUDIO OUT PC OUT D-Sub Cable (Not Supplied) Diplay Mode (D-Sub and HDMI/DVI Input) Optimal reolution i 1920 X 60 Hz. Mode IBM MAC VESA CVT VESA DMT VESA GTF 12 Reolution 640 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1024 Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V) +/- -/+ -/- -/- -/- -/+ -/+ -/+ -/+ -/- -/- -/- +/+ +/+ +/+ -/- -/- +/+ +/+ +/+ +/+ +/+ -/+ -/+ +/+ +/+ -/+ -/+ -/+ -/+ -/- VESA DMT / DTV CEA 1920 x 1080p /+ NOTE x x x x For HDMI/DVI cable connection, you mut ue the HDMI IN 1(DVI) jack. The interlace mode i not upported. The et may operate abnormally if a non-tandard video format i elected. Separate and Compoite mode are upported. SOG(Sync On Green) i not upported.

13 Source Lit Changing the Input Source Ue to elect TV or an external input ource uch a a DVD / Blu-ray player / cable box / STB atellite receiver. OO MENUm Input Source Lit ENTERE SOURCE TV / AV / Component / PC / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB You can only chooe external device that are connected to the TV. In the Source Lit, connected input will be highlighted. In the Source Lit, PC i alway activated. Edit Name OO MENUm Input Edit Name ENTERE VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Device / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jack to make your input ource election eaier. When a PC with a reolution of 1920 x 60Hz i connected to the HDMI IN 1(DVI) port, you hould et the port to DVI PC mode under Edit Name. When connecting an HDMI/DVI cable to the HDMI IN 1(DVI) port, you hould et to DVI PC or DVI Device mode under Edit Name. 02 Connection Baic Feature How to Navigate Menu Before uing the TV, follow the tep below to learn how to navigate the menu and elect and adjut different function CONTENT TOOLS RETURN INTERNET INFO EXIT A B C D 1 MENU button: Diplay the main on-creen menu. 2 ENTERE / Direction button: Move the curor and elect an item. Confirm the etting. 3 RETURN button: Return to the previou menu. 4 EXIT button: Exit the on-creen menu. 4 How to Operate the OSD (On Screen Diplay) The acce tep may differ depending on the elected menu MENUm The main menu option appear on the creen: Picture, Sound, Channel, Setup, Input, Application, Support. / Select an icon with the or button. ENTERE Pre ENTERE to acce the ub-menu. / Select the deired ubmenu with the or button. / Adjut the value of an item with the or button. The adjutment in the OSD may differ depending on the elected menu. ENTERE Pre ENTERE to confirm the election. EXITe Pre EXIT. 13

14 Baic Feature Seeing Channel Channel Lit Channel Menu Add, delete or et Favorite channel and ue the program guide for digital broadcat. OO MENUm Channel Channel Lit ENTERE Select a channel in the All Channel, Added Channel, Favorite or Programmed creen by preing the / and ENTERE button. Then you can watch the elected channel. Added Channel 6 Air 6-1 * TV #6 7 Air 8 Air 9 Air 9-1 * TV #9 10 Air 10-1 * TV # * TV #11 CH LIST Uing Favorite Channel OO MENUm Channel Channel Lit ENTERE Add to Favorite / Delete from Favorite t Set channel you watch frequently a Favorite. 1. Select a channel and pre the TOOLS button. 2. Add or delete a channel uing the Add to Favorite or Delete from Favorite menu repectively. Added Channel 6 Air 6-1 * TV #6 7 Air Delete Add to Favorite 8 Air Timer Viewing 9 Air Channel Name Edit 9-1 * TV #9 Select All 10 Air 10-1 * TV # * TV #11 Air Antenna Zoom Select k Page T Tool To how all Favorite channel, click on the button hown on the right. FAV.CH Air Antenna Zoom Select k Page T Tool All Channel: Show all currently available channel. Added Channel: Show all added channel. * Favorite: Show all favorite channel. Programmed: Show all currently reerved program. Uing the color button with the Channel Lit x Red (Antenna): Switche to Air or Cable. x Green (Zoom): Enlarge or hrink a channel number. x Yellow (Select): Select multiple channel lit. Select deired channel and pre the Yellow button to et all the elected channel at the ame time. The c mark appear to the left of the elected channel. x k (Page): Move to next or previou page. x T (Tool): Diplay the Channel Lit option menu (The Option menu may differ depending on the ituation.). Channel Statu Diplay Icon Icon Operation c A channel elected. * A channel et a a Favorite. ) A reerved Program. Memorizing Channel OO MENUm Channel ENTERE Antenna (Air / Cable) t Before your televiion can begin memorizing the available channel, you mut pecify the type of ignal ource that i connected to the TV (i.e. an Air or a Cable ytem). Auto Program Air: Air antenna ignal. Cable: Cable antenna ignal. Auto: Air and Cable antenna. NOTE x When electing the Cable TV ytem: STD, HRC and IRC identify variou type of cable TV ytem. Contact your local cable company to identify the type of cable ytem that exit in your particular area. At thi point, the ignal ource ha been elected. 14

15 x After all the available channel are tored, it tart to remove crambled channel. The Auto program menu then reappear. Editing Channel OO MENUm Channel Channel Lit ENTERE Channel Name Edit 1. Select a channel and pre the TOOLS button. 2. Edit the channel name uing the Channel Name Edit menu. Channel Name Edit (analog channel only): Aign your own channel name. Other Feature OOMENUm Channel ENTERE Clear Scrambled Channel Thi function i ued to filter out crambled channel after Auto Program i completed. Thi proce may take up to 20~30 minute. How to Stop Searching Scrambled Channel 1. Pre the ENTERE button to elect Stop. 2. Pre the button to elect Ye. 3. Pre the ENTERE button. Thi function i only available in Cable mode. Channel Lit Channel Lit Option Menu Set each channel uing the Channel Lit menu option (Add / Delete, Timer Viewing, Select All / Deelect All). Option menu item may differ depending on the channel tatu. 1. Select a channel and pre the TOOLS button. 2. Select a function and change it etting. Add / Delete: Delete or add a channel to diplay the channel you want. NOTE x All deleted channel will be hown on the All Channel menu. x A gray-colored channel indicate the channel ha been deleted. x The Add menu only appear for deleted channel. x Delete a channel from the Added Channel or Favorite menu in the ame manner. Timer Viewing: You can et a deired channel to be diplayed automatically at the reerved time. Set the current time firt to ue thi function. 1. Pre the / / / button to elect the deired channel in Channel Lit. 2. Pre the TOOLS button, then elect Timer Viewing. 3. Scroll up or down to adjut the etting in the box, or ue the numeric button on your remote for entering the date and time. If you elected Once, Every Week or Every Day in Repeat, you can enter the date you want. 4. Select OK, then pre the ENTERE button when done. NOTE xonly memorized channel can be reerved. x Reerved program will be diplayed in the Programmed menu. x When a digital channel i elected, pre the button to view the digital program. Select All: Select all the channel in the channel lit. Deelect All: Deelect all the elected channel. You can only elect Deelect All when one or more channel are elected. Programmed (in Channel Lit) You can view, modify or delete a how you have reerved to watch. Programmed timer viewing i diplayed here. Highlight a program and pre the TOOLS button to diplay Option. Change Info: Change a how you have reerved to watch. Begin with tep 3 of Timer Viewing, above. Cancel Schedule: Cancel a how you have reerved to watch. Thi delete the highlighted or elected program(). Information: Diplay a how you have reerved to watch (You can alo change the reervation Information.). Alternatively, you can view Information by highlighting a program and preing the ENTERE button. Select All / Deelect All: Select or deelect all reerved program. 03 Baic Feature 15

16 Baic Feature Fine Tune (analog channel only) If the reception i clear, you do not have to fine tune the channel, a thi i done automatically during the earch and tore operation. If the ignal i weak or ditorted, fine tune the channel manually. Scroll to the left or right until the image i clear. Setting are applied to the channel your currently watching. Fine tuned channel that have been aved are marked with an aterik * on the right-hand ide of the channel number in the channel banner. To reet the fine-tuning, elect Reet. Picture Menu Changing the Preet Picture Mode OO MENUm Picture Mode ENTERE Mode t Select your preferred picture type. Dynamic: Suitable for a bright room. Standard: Suitable for a normal environment. Natural: Suitable for reducing eye train. Natural i not available in PC mode. Movie: Suitable for watching movie in a dark room. Adjuting Picture Setting OO MENUm Picture ENTERE Backlight / Contrat / Brightne / Sharpne / Color / Tint (G/R) Your televiion ha everal etting option for picture quality control. NOTE x When you make change to Backlight, Contrat, Brightne, Sharpne, Color or Tint (G/R) the OSD will be adjuted accordingly. x In PC mode, you can only make change to Backlight, Contrat and Brightne. x Setting can be adjuted and tored for each external device connected to the TV. x Lowering picture brightne reduce power conumption. Economical Solution Eco Solution OO MENUm Picture Eco Solution ENTERE Energy Saving (Off / Low / Medium / High / Picture Off / Auto): Thi adjut the brightne of the TV in order to reduce power conumption. If you elect Picture Off, the creen i turned off, but the ound remain on. Pre any button to turn on the creen again. Eco Senor (Off / On): To enhance your power aving; the picture etting will automatically adapt to the light in the room. If you adjut the Backlight, the Eco Senor will be et to Off. Min Backlight: When Eco enor i On, the minimum creen brightne can be adjuted manually. If Eco Senor i On, the diplay brightne may change (become lightly darker or brighter) depending on the urrounding light intenity. No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): To avoid unneceary energy conumption, et how long you want the TV to remain on if it' not receiving a ignal. Diabled when the PC i in power aving mode. Changing the Picture Option Advanced Setting OO MENUm Picture Advanced Setting ENTERE (Advanced Setting are available in Standard / Movie mode) Compared to previou model, new Samung TV have a more precie picture. In PC mode, you can only make change to Dynamic Contrat, Gamma, White Balance and LED Motion Plu. Advanced Setting Black Tone : Off Dynamic Contrat : Medium Shadow Detail : -2 Gamma : 0 Expert Pattern : Off RGB Only Mode : Off Color Space : Native U Move E Enter R Return Black Tone (Off / Dark / Darker / Darket): Select the black level to adjut the creen depth. 16

17 Dynamic Contrat (Off / Low / Medium / High): Adjut the creen contrat. Shadow Detail (-2~+2): Increae the brightne of dark image. Gamma: Adjut the primary color intenity. Expert Pattern (Off / Pattern1 / Pattern2): By running the Expert Pattern function, the picture can be calibrated. If the OSD menu diappear or a menu other than the Picture menu i opened, the calibration i aved and the Expert Pattern window diappear. Off: Turn the Expert Pattern function off. Pattern 1: Thi i a tet creen deigned to demontrate the affect of diplay etting on hade. Pattern 2: Thi i a tet creen deigned to demontrate the affect of diplay etting on color. After electing Pattern 1 or Pattern 2, you can adjut any of the advanced etting to the deired effect. While the Expert Pattern i running, ound i not output. Only enabled on DTV / Component / HDMI. RGB Only Mode (Off / Red / Green / Blue): Diplay the Red, Green and Blue color for making fine adjutment to the hue and aturation. Color Space (Auto / Native / Cutom): Adjut the range of color available to create the image.to adjut Color, Red, Green, Blue and Reet, et Color Space to Cutom. White Balance: Adjut the color temperature for a more natural picture. R-Offet / G-Offet / B-Offet: Adjut each color' (red, green, blue) darkne. R-Gain / G-Gain / B-Gain: Adjut each color' (red, green, blue) brightne. Reet: Reet the White Balance to it' default etting. 10p White Balance (Off / On): Control the white balance in 10 point interval by adjuting the red, green, and blue brightne. Available when the picture mode i et to Movie and when the external input i et to HDMI or Component. Some external device may not upport thi function. Interval: Select interval to adjut. Red: Adjut the red level. Green: Adjut the green level. Blue: Adjut the blue level. Reet: Reet the 10p White Balance to it default etting. Fleh Tone: Emphaize pink Fleh Tone. Edge Enhancement (Off / On): Emphaize object boundarie. xvycc (Off / On): Setting the xvycc mode on increae detail and color pace when watching movie from an external device (e.g. BD/DVD player) connected to the HDMI or Component IN jack. Available when the picture mode i et to Movie and when the external input i et to HDMI or Component. Some external device may not upport thi function. LED Motion Plu (Off / On): Remove drag from fat cene with a lot of movement to provide a clear picture. Picture Option OO MENUm Picture Picture Option ENTERE In PC mode, you can only make change to the Color Tone, Size, Digital Noie Filter and Auto Protection Time. Picture Option Color Tone : Normal Size : 16:9 Digital Noie Filter : Auto MPEG Noie Filter : Auto HDMI Black Level : Normal Film Mode : Off Auto Motion Plu 120Hz : Standard U Move E Enter R Return Color Tone (Cool / Normal / Warm1 / Warm2) Warm1 or Warm2 will be deactivated when the picture mode i Dynamic. Setting can be adjuted and tored for each external device connected to an input on the TV. Size: Your cable box/atellite receiver may have it own et of creen ize a P.SIZE well. However, we highly recommend you ue 16:9 mode mot of the time. 16:9: Set the picture to 16:9 wide mode. Zoom1: Ue for moderate magnification. Zoom2: Ue for a tronger magnification. Wide Fit: Enlarge the apect ratio of the picture to fit the entire creen. Available for HD 1080i / 720p ignal in 16:9 mode. 4:3: Set the picture to baic (4:3) mode. Do not watch in 4:3 format for a long time. Trace of border diplayed on the left, right and center of the creen may caue image retention (creen burn) which are not covered by the warranty. 03 Baic Feature 17

18 Baic Feature Screen Fit: Diplay the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) ignal are inputted. NOTE x After electing Zoom1, Zoom2 or Wide Fit: 1. Pre the button to elect Poition. 2. Pre the ENTERE button. 3. Pre the or button to move the picture up or down. 4. Pre the ENTERE button. 5. Pre the button to elect Reet. 6. Pre the ENTERE button to reet the picture to it default poition. x After electing Screen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) mode, you may need to center the picture: 1. Pre the or button to elect Poition. 2. Pre the ENTERE button. 3. Pre the,, or button to move the picture. 4. Pre the ENTERE button. 5. Pre the or button to elect Reet. 6. Pre the ENTERE button. x HD (High Definition): 16:9-1080i/1080p (1920x1080), 720p (1280x720) x Setting can be adjuted and tored for each external device you have connected to an input on the TV. Input Source Picture Size ATV, AV, 16:9, Zoom1, Component (480i, 480p) Zoom2, 4:3 DTV(1080i), 16:9, 4:3, Wide Fit, Component (1080i, 1080p), Screen Fit HDMI (720p, 1080i, 1080p) PC 16:9, 4:3 Digital Noie Filter (Off / Low / Medium / High / Auto / Auto Viualiation): If the broadcat ignal received by your TV i weak, you can activate the Digital Noie Filter feature to reduce any tatic and ghoting that may appear on the creen. When the ignal i weak, try other option until the bet picture i diplayed. Auto Viualiation: When changing analog channel, diplay ignal trength. Only available for analog channel. When bar i green, i that the bet poible ignal. MPEG Noie Filter (Off / Low / Medium / High / Auto): Reduce MPEG noie to provide improved picture quality. HDMI Black Level (Normal / Low): Select the black level on the creen to adjut the creen depth. Available only in HDMI mode. Film Mode (Off / Auto1 / Auto2): Set the TV to automatically ene and proce film ignal from all ource and adjut the picture for optimum quality. Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i). Auto Motion Plu 120Hz (Off / Clear / Standard / Smooth / Cutom / Demo): Remove drag from fat cene with a lot of movement to provide a clearer picture. If noie occur on the creen, pleae et the Auto Motion Plu 120Hz to Off. If Auto Motion Plu 120Hz i Cutom, you can et the Blur Reduction, Judder Reduction or Reet manually. If Auto Motion Plu 120Hz i Demo, you can compare the difference between on and off mode. Blur Reduction: Adjut the blur reduction level from video ource. Judder Reduction: Adjut the judder reduction level from video ource when playing film. Reet: Reet the cutom etting. Auto Protection Time (2 hour / 4 hour / 8 hour / 10 hour / Off): Set the time the creen remain idle with a till image until the creen aver i activated. The creen aver prevent the formation of ghot image on the creen. Picture Reet (OK / Cancel) Reet your current picture mode to it default etting. Setting up the TV with Your PC Set the input ource to PC. OO MENUm Picture ENTERE Auto Adjutment t Adjut frequency value/poition and fine tune the etting automatically. Not available when connecting with an HDMI/DVI cable. 18

19 Screen Coare / Fine: Remove or reduce picture noie. If the noie i not removed by Fine-tuning alone, then adjut the frequency a bet a poible (Coare) and Finetune again. After the noie ha been reduced, readjut the picture o that it i aligned to the center of creen. Poition: Adjut the PC creen poitioning if it doe not fit the TV creen. Pre the or button to adjut the Vertical-Poition. Pre the or button to adjut the Horizontal-Poition. Image Reet: Reet the image to default etting. Uing Your TV a a Computer (PC) Diplay Setting Up Your PC Software (Baed on Window XP) Depending on the verion of Window and the video card, the actual creen on your PC will probably look different, but the ame baic et-up information will apply in mot cae. (If not, contact your computer manufacturer or Samung Dealer.) 1. Click on Control Panel on the Window tart menu. 2. Click on Appearance and Theme in the Control Panel window and a diplay dialog-box will appear. 3. Click on Diplay and a diplay dialog box will appear. 4. Navigate to the Setting tab on the diplay dialog-box. y The correct ize etting (reolution) [Optimum: 1920 X 1080 pixel] y If a vertical-frequency option exit on your diplay etting dialog box, the correct value i 60 or 60 Hz. Otherwie, jut click OK and exit the dialog box. Sound Menu Adjuting Sound Setting OO MENUm Sound Equalizer ENTERE Equalizer Adjut the ound mode (tandard ound mode only). Balance L/R: Adjut the balance between the right and left peaker. 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjutment): Adjut the level of pecific bandwidth frequencie. Reet: Reet the equalizer to it default etting. Sound Setting OO MENUm Sound ENTERE SRS TruSurround HD (Off / On) t (tandard ound mode only) Thi function provide a virtual 5.1 channel urround ound experience through a pair of peaker or headphone uing HRTF (Head Related Tranfer Function) technology. SRS TruDialog (Off / On) (tandard ound mode only) Thi function allow you to increae the intenity of a voice over background muic or ound effect o that dialog can be heard more clearly. 03 Baic Feature Changing the Preet Sound Mode OO MENUm Sound SRS TheaterSound ENTERE SRS TheaterSound t Standard: Select the normal ound mode. Muic: Emphaize muic over voice. Movie: Provide the bet ound for movie. Clear Voice: Emphaize voice over other ound. Amplify: Increae the intenity of high-frequency ound to allow a better litening experience for the hearing impaired. Preferred Language (digital channel only) Digital-TV broadcat are capable of imultaneou tranmiion of many audio track (for example, imultaneou tranlation of the program into foreign language). You can only elect a language among the one being broadcated. MTS 19

20 Baic Feature Multi-Track Sound (MTS) t (analog channel only) Mono: Chooe for channel that are broadcating in mono or if you are having difficulty receiving a tereo ignal. Stereo: Chooe for channel that are broadcating in tereo. MTS SAP: Chooe to liten to the Separate Audio Program, which i uually a foreign-language tranlation. Depending on the particular program being broadcat, you can liten to Mono, Stereo or SAP. Auto Volume (Off / Normal / Night) To equalize the volume level on each channel, et to Normal. Night: Thi mode provide an improved ound experience compared to Normal mode, making almot no noie. It i ueful at night. Speaker Select (External Speaker / TV Speaker) A ound echo may occur due to a difference in decoding peed between the main peaker and the audio receiver. In thi cae, et the TV to External Speaker. When Speaker Select i et to External Speaker, the volume and MUTE button will not operate and the ound etting will be limited. When Speaker Select i et to External Speaker x TV Speaker: Off, External Speaker: On When Speaker Select i et to TV Speaker x TV Speaker: On, External Speaker: On If there i no video ignal, both peaker will be mute. SPDIF Output SPDIF (Sony Philip Digital Interface) i ued to provide digital ound, reducing interference going to peaker and variou digital device uch a an A/V Receiver/Home theater. Audio Format: During the reception of a digital TV broadcat, you can elect the Digital Audio output (SPDIF) format from the option PCM or Dolby Digital. Audio Delay: Correct audio-video ync problem, when watching TV or video, and when litening to digital audio output uing an external device uch a an AV receiver (0m ~ 250m). Setting the Time Setup Menu OO MENUm Setup Time ENTERE Time Clock: Setting the clock i for uing variou timer feature of the TV. OO The current time will appear every time you pre the INFO button. If you diconnect the power cord, you have to et the clock again. Clock Mode (Auto / Manual) Auto: Set the current time automatically uing the time from a digital channel. The antenna mut be connected in order to et the time automatically. Manual: Set the current time manually. Depending on the broadcat tation and ignal, the auto time et up may not be correct. In thi cae, et the time manually. Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm manually. Available only when Clock Mode i et to Manual. You can et the Month, Day, Year, Hour and Minute directly by preing the number button on the remote control. DST (Daylight Saving Time) (Off / On): Switche the Daylight Saving Time function on or off. Thi function i only available when the Clock Mode i et to Auto. Time Zone: Select your time zone. Thi function i only available when the Clock Mode i et to Auto. Uing the Sleep Timer OO MENUm Setup Time Sleep Timer ENTERE Sleep Timer t: Automatically hut off the TV after a preet period of time (30, 60, 90, 120, 150 and 180 minute). To cancel the Sleep Timer, elect Off. Sound Reet (OK / Cancel) Reet all ound etting to the factory default. 20

21 Setting the On / Off Timer OO MENUm Setup Time Timer 1 ENTERE Timer 1 / Timer 2 / Timer 3: Three different on / off timer etting can be made. You mut et the clock firt. Timer 1 On Time Inactivate Off Time Volume Source Antenna Channel 10 TV Cable 1 Repeat Inactivate Once am am Sun Mon Tue Wed Thu Fri Sat L Move U Adjut E Enter R Return On Time / Off Time: Set the hour, minute, and activate / inactivate (To activate the timer with the etting you ve choen, et to Activate.) Volume: Set the deired volume level. Source: Select TV or USB content to be played when the TV i turned on automatically. (USB can be elected only when a USB device i connected to the TV) Antenna (when the Source i et to TV): Select Air or Cable. Channel (when the Source i et to TV): Select the deired channel. Content (when the Source i et to USB): Select a folder in the USB device containing muic or photo file to be played when the TV i turned on automatically. NOTE x If there i no muic file on the USB device or the folder containing a muic file i not elected, the Timer function doe not operate correctly. x When there i only one photo file in the USB, the Slide Show will not play. x If a folder name i too long, the folder cannot be elected. x Each USB you ue i aigned it own folder. When uing more than one of the ame type of USB, make ure the folder aigned to each USB have different name. Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to et at you convenience. If you elect Manual, you can et up the day you want to activate the timer. The c mark indicate the day i elected. Auto Power Off (available only when the TV i turned on by the Timer): The TV will be automatically turned off after 3 hour of being left idle to prevent overheating. Locking Program OO MENUm Setup Security ENTERE Security V-Chip: The V-Chip feature automatically lock out program that are deemed inappropriate for children. The uer mut enter a PIN (peronal identification number) before any of the V-Chip retriction are et up or changed. NOTE x V-Chip i not available in HDMI, Component or PC mode. x The default PIN number of a new TV et i x Allow All: Pre to unlock all TV rating. x Block All: Pre to lock all TV rating. V-Chip Lock (Off / On): You can block rated TV Program. TV Parental Guideline: You can block TV program depending on their rating. Thi function allow you to control what your children are watching. TV-Y: Young children / TV-Y7: Children 7 and over / TV-G: General audience / TV-PG: Parental guidance / TV-14: Viewer 14 and over / TV-MA: Mature audience ALL: Lock all TV rating. / FV: Fantay violence / V: Violence / S: Sexual ituation / L: Adult Language / D: Sexually Suggetive Dialog The V-Chip will automatically block certain categorie dealing with more enitive material. For example, if you block the TV-Y category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G category, then all the categorie in the young adult group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The ub-rating (D, L, S, V) work imilarly. So, if you block the L ub-rating in TV-PG, then the L ub-rating in TV-14 and TV-MA will automatically be blocked. MPAA Rating: You can block movie depending on their MPAA rating. The Motion Picture Aociation of America(MPAA) ha implemented a rating ytem that provide parent or guardian with advanced information on which film are appropriate for children. G: General audience (no retriction). / PG: Parental guidance uggeted. / PG-13: Parent trongly cautioned. / R: Retricted. Children under 17 hould be accompanied by an adult. / NC-17: No children under age 17. / X: Adult only. / NR: Not rated. 03 Baic Feature 21

22 Baic Feature The V-Chip will automatically block any category that deal with more enitive material. For example, if you block the PG-13 category, then R, NC-17 and X will automatically be blocked. Canadian : You can block TV program depending on their Anglophone Canadian rating. C: Programming intended for children under age 8. / C8+: Programming generally conidered acceptable for children 8 year and over to watch on their own. / G: General programming, uitable for all audience. / PG: Parental Guidance. / 14+: Programming contain theme or content which may not be uitable for viewer under the age of 14. / 18+: Adult programming. The V-Chip will automatically block any category that deal with more enitive material. For example, if you block the G category, then PG, 14+ and 18+ will automatically be blocked. Canadian French: You can block TV program depending on their French Canadian rating. G: General / 8 an+: Programming generally conidered acceptable for children 8 year and over to watch on their own. / 13 an+: Programming may not be uitable for children under the age of 13. / 16 an+: Programming i not uitable for children under the age of 16. / 18 an+: Programming retricted to adult. The V-Chip will automatically block any category that deal with more enitive material. For example, if you block the 8 an+ category, then 13 an+, 16 an+ and 18 an+ will automatically be blocked alo. Downloadable U.S. Rating: Parental retriction information can be ued while watching DTV channel. NOTE x If information i not downloaded from the broadcating tation, the Downloadable U.S. Rating menu i deactivated. x Parental retriction information i automatically downloaded while watching DTV channel. It may take everal econd. x The Downloadable U.S. Rating menu i available for ue after information i downloaded from the broadcating tation. However, depending on the information from the broadcating tation, it may not be available for ue. x Parental retriction level differ depending on the broadcating tation. The default menu name and Downloadable US Rating change depending on the downloaded information. x Even if you et the on-creen diplay to another language, the Downloadable U.S. Rating menu will appear in only. x The rating will automatically block certain categorie that deal with more enitive material. x The rating title (For example: Humor Level..etc) and TV rating (For example: DH, MH, H..etc) may differ depending on the broadcating tation. Change PIN: The Change PIN creen will appear. Chooe any 4 digit for your PIN and enter them. A oon a the 4 digit are entered, the Confirm New PIN creen appear. Re-enter the ame 4 digit. When the Confirm creen diappear, your PIN ha been memorized. How to watch a retricted channel If the TV i tuned to a retricted channel, the V-Chip will block it. The creen will go blank and the following meage will appear: Thi channel i blocked by V-Chip. Pleae enter the PIN to unblock. If you forget the PIN, pre the remote-control button in the following equence, which reet the pin to : POWER (off) MUTE POWER (on) Other Feature OO MENUm Setup ENTERE Menu Language Set the menu language. 1. Select Menu Language and pre the ENTERE button. 2. Chooe deired language and pre the ENTERE button. Chooe between, Epañol and Françai. Caption (On-Screen Text Meage) Caption (Off / On): You can witch the caption function on or off. If caption are not available, they will not be diplayed on the creen. The Caption feature doen t work in Component, HDMI or PC mode. CC 22

23 Caption Mode: You can elect the deired caption mode. The availability of caption depend on the program being broadcat. Default / CC1~CC4 / Text1~Text4: (analog channel only) The Analog Caption function operate in either analog TV channel mode or when a ignal i upplied from an external device to the TV (Depending on the broadcating ignal, the Analog Caption function may or may not work with digital channel.). Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (digital channel only) The Digital Caption function work with digital channel. Service1~6 may not be available in digital caption mode depending on the broadcat. Digital Caption Option: (digital channel only) Size: Option include Default, Small, Standard and Large. The default i Standard. Font Style: Option include Default and Style 0 to 7. The default i Style 0. Foreground Color: Option include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the color of the letter. The default i White. Background Color: Option include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the background color of the caption. The default i Black. Foreground Opacity: Thi adjut the opacity of text. Option include Default, Tranparent, Tranlucent, Solid and Flahing. Background Opacity: Thi adjut the opacity of the caption background. Option include Default, Tranparent, Tranlucent, Solid and Flahing. Return to Default: Thi option et each Size, Font Style, Foreground Color, Background Color, Foreground Opacity and Background Opacity to it default. NOTE x Digital Caption Option are available only when Default and Service1 ~ Service6 can be elected in Caption Mode. x The availability of caption depend on the program being broadcated. x The Default etting follow the tandard et by the broadcater. x The Foreground and Background cannot be et to have the ame color. x You cannot et both the Foreground Opacity and the Background Opacity to Tranparent. Network (Network Type / Network Setup / Network Tet) For detail on et up option, refer to the Network Connection intruction (p. 26). General Game Mode (Off / On): When connecting to a game conole uch a PlayStation or Xbox, you can enjoy a more realitic gaming experience by electing the game mode. NOTE xprecaution and limitation for game mode To diconnect the game conole and connect another external device, et Game Mode to Off in the etup menu. If you diplay the TV menu in Game Mode, the creen hake lightly. x Game Mode i not available when the input ource i et to TV or PC. x After connecting the game conole, et Game Mode to On to prevent poor picture quality. x If Game Mode i On: Picture mode i et to Standard and Sound mode i et to Movie. x Selecting Reet after adjuting the equalizer return the equalizer to it default etting. BD Wie (Off / On): Provide the optimal picture quality for Samung DVD, Blu-ray and Home Theater product which upport BD Wie. When BD Wie i turned On, the picture mode i automatically changed to the optimal reolution. Available when connecting Samung product that upport BD Wie through a HDMI cable. Menu Tranparency (Bright / Dark): Set the Tranparency of the menu. Melody (Off / Low / Medium / High): Set o that a melody play when the TV i turned on or off. Wirele Remote Control (Off / On) Turn on/off or give permiion to Samung mobile phone/ device. You mut have a Samung Mobile phone/device which upport Wirele Remote Control. For more detail, refer to each device' manual. 03 Baic Feature 23

24 Baic Feature Picture In Picture (PIP) PIP t You can watch the TV tuner and one external video ource imultaneouly. PIP (Picture-in-Picture) doe not function in the ame mode. OO MENUm Setup PIP ENTERE NOTE x For PIP ound, refer to the Sound Select intruction. x If you turn the TV off while watching in PIP mode, the PIP window will diappear. x You may notice that the picture in the PIP window become lightly unnatural when you ue the main creen to view a game or karaoke. x While V-Chip or Internet@TV i in operation, the PIP function cannot be ued. xpip Setting Main picture Component, HDMI1/DVI, HDMI2, HDMI3, HDMI4, PC Sub picture PIP (Off / On): Activate or deactivate the PIP function. Air/Cable (Air / Cable): Select either Air or Cable a the input ource for the ub-creen. Channel: Select the channel for the ub-creen. Size (Õ / Ã): Select a ize for the ub-picture. Poition (à / / / œ): Select a poition for the ub-picture. Sound Select (Main / Sub): You can chooe the deired ound (Main / Sub) in PIP mode. TV Support Menu OO MENUm Support ENTERE Legal Notice The Legal Notice may differ depending on the country. Self Diagnoi Picture Tet: Ue to check for picture problem. Ye: If the tet pattern doe not appear or there i noie in the tet pattern, elect Ye. There may be a problem with the TV. Contact Samung Call Center for aitance (1-800-SAMSUNG). No: If the tet pattern i properly diplayed, elect No. There may be a problem with your external equipment. Pleae check your connection. If the problem perit, refer to the external device uer manual. Sound Tet: Ue the built-in melody ound to check for ound problem. If you hear no ound from the TV peaker, before performing the ound tet, make ure Speaker Select i et to TV Speaker in the Sound menu. The melody will be heard during the tet even if Speaker Select i et to External Speaker or the ound i muted by preing the MUTE button. Ye: If you can hear ound only from one peaker or not at all during the ound tet, elect Ye. There may be a problem with the TV. Contact Samung Call Center for aitance (1-800-SAMSUNG). No: If you can hear ound from the peaker, elect No. There may be a problem with your external equipment. Pleae check your connection. If the problem perit, refer to the external device uer manual. Signal Information: (Digital channel only) An HD channel reception quality i either perfect or the channel are unavailable. Adjut your antenna to increae ignal trength. Troublehooting: If the TV eem to have a problem, refer to thi decription. If none of thee troublehooting tip apply, contact the Samung cutomer ervice center. 24

25 Software Upgrade Software Upgrade can be performed by network connection or downloading the latet firmware from www. amung.com, to a USB memory device. Current Verion - the oftware already intalled in the TV. Software i repreented a Year/Month/Day_Verion. Current Verion By USB By Online Alternative Software Software Upgrade 2010/01/18_ /01/15_00000 By Online: Upgrade the oftware uing the Internet. Firt, configure your network. For detailed procedure on uing the Network Setup, refer to the "Network Connection" intruction. If the internet connection doen t operate properly, the connection may be broken. Pleae retry downloading. If the problem perit, download by USB and upgrade. Alternative Software (backup): Diplay the Software verion downloaded through By Online. During the Software upgrading, When the Upgrade will dicontinue from lat tep, thi function be activated. HD Connection Guide Refer to thi information when connecting external device to the TV. 03 Baic Feature U Move E Enter R Return Intalling the Latet Verion By USB: Inert a USB drive TV Rear Panel containing the firmware upgrade file, downloaded from com, into the TV. Pleae or be careful not to diconnect the power or remove the USB drive until upgrade USB Drive are complete. The TV will be turned off and on automatically after completing the firmware upgrade. When oftware i upgraded, video and audio etting you have made will return to their default etting. We advie you to to write down your etting o that you can eaily reet them after the upgrade. Contact Samung View thi information when your TV doe not work properly or when you want to upgrade the oftware. You can find information regarding our call center and how to download product and oftware. 25

26 Advanced Feature Network Connection You can et up your TV o that it can acce the Internet through your local area network (LAN) uing a wired or wirele connection. Connecting to a Wired Network You can attach your TV to your LAN uing cable in three way: y You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem uing a Cat 5 cable. See the diagram below. The Modem Port on the Wall External Modem (ADSL / VDSL / Cable TV) TV Rear Panel Modem Cable (Not Supplied) LAN Cable (Not Supplied) y You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which i connected to an external modem. Ue Cat 5 cable for the connection. See the diagram below. The Modem Port on the Wall External Modem (ADSL / VDSL / Cable TV) IP Sharer (having DHCP erver) TV Rear Panel Modem Cable (Not Supplied) LAN Cable (Not Supplied) LAN Cable (Not Supplied) y Depending on how your network i configured, you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet uing a Cat 5 cable. See the diagram below. Note that the wall outlet i attached to a modem or router elewhere in your houe. The Modem Port on the Wall TV Rear Panel LAN Cable (Not Supplied) If you have a Dynamic Network, you hould ue an ADSL modem or router that upport Dynamic Hot Configuration Protocol (DHCP). Modem and router that upport DHCP automatically provide the IP addre, ubnet mak, gateway, and DNS value your TV need to acce the Internet o you don t have to enter them manually. Mot home network are Dynamic Network. Some network require a Static IP addre. If your network require a Static IP addre, you mut enter the IP addre, ubnet mak, gateway, and DNS value manually on your TV Cable Setup Screen when you et up the network connection. To get the IP addre, ubnet mak, gateway, and DNS value, contact your Internet Service Provider (ISP). If you have a Window computer, you can alo get thee value through your computer. You can ue ADSL modem that upport DHCP if your network require a Static IP addre. ADSL modem that upport DHCP alo let you ue Static IP addree. 26

27 Network Setup (Auto) Ue the Automatic Network Setup when connecting your TV to a network that upport DHCP. To et up your TV cable network connection automatically, follow thee tep: How to et up automatically 1. Connect your TV to your LAN a decribed in the previou ection. 2. Turn on your TV, pre the MENU button on your remote, ue the or button to elect Setup, and then pre the ENTERE button. 3. Ue the or button to elect Network in the Setup menu, and then pre the ENTERE button. The Network creen appear. Network Network Type : Wired Network Setup Network Tet SWL(Samung Wirele Link) : Off SWL connect 4. On the Network creen, elect Network Type. 5. Set Network Type to Wired. 6. Select Network Setup. The Network Setup creen appear. Network Setup U Move E Enter R Return Network Setup (Manual) Ue the Manual Network Setup when connecting your TV to a network that require a Static IP addre. Getting the Network Connection Value To get the Network connection value on mot Window computer, follow thee tep: 1. Right click the Network icon on the bottom right of the creen. 2. In the pop-up menu that appear, click Statu. 3. On the dialog that appear, click the Support tab. 4. On the Support Tab, click the Detail button. The Network connection value are diplayed. How to et up manually To et up your TV cable network connection manually, follow thee tep: 1. Follow Step 1 through 6 in the How to et up automatically procedure. 2. Set Internet Protocol Setup to Manual. 3. Pre the button on your remote to go to the firt entry field. 4. Enter the IP Addre, Subnet Mak, Gateway, and DNS Server value. Ue the number button on your remote to enter number and the arrow button to move from one entry field to another. 5. When done, pre the RETURN button on your remote. 6. Select Network Tet to check the Internet connectivity. 04 Advanced Feature Internet Protocol Setup : Auto IP Addre : Subnet Mak : Gateway : DNS : Auto DNS Server : U Move E Enter R Return 7. Set Internet Protocol Setup to Auto. 8. Auto acquire and enter the needed Internet value automatically. 9. When done, pre the RETURN button on your remote. 10. Select Network Tet to check the Internet connectivity. 11. If the Network Function ha not acquired the network connection value, go to the direction for Manual. 27

28 Advanced Feature Connecting to a Wirele Network To connect your TV to your network wirelely, you need a wirele router or modem and a Samung Wirele LAN Adapter (WIS09ABGN), which you connect to your TV back or ide panel USB jack. See the illutration below. To ue the SWL(Samung Wirele Link) function, connect to the USB 1 (HDD) port. TV Rear Panel The LAN Port on the Wall Wirele IP Sharer (AP having DHCP erver) or Samung Wirele LAN Adapter LAN Cable (Not Supplied) Samung Wirele LAN adapter i old eparately and i offered by elect retailer, Ecommerce ite and Samungpart. com. Samung Wirele LAN adapter upport the IEEE A/B/G and N communication protocol. Samung recommend uing IEEE N. When you play the video over a IEEE B/G connection, the video may not play moothly. NOTE x You mut ue the Samung Wirele LAN Adapter (WIS09ABGN) to ue a wirele network. x Samung Wirele LAN adapter i old eparately. The WIS09ABGN Wirele LAN adapter i offered by elect retailer, Ecommerce ite and Samungpart.com. x To ue a wirele network, your TV mut be connected to a wirele IP harer. If the wirele IP harer upport DHCP, your TV can ue a DHCP or tatic IP addre to connect to the wirele network. x Select a channel for the wirele IP harer that i not currently being ued. If the channel et for the wirele IP harer i currently being ued by another device nearby, thi will reult in interference and communication failure. x If you apply a ecurity ytem other than the ytem lited blow, it will not work with the TV. xif Pure High-throughput (Greenfield) n mode i elected and the Encryption type i et to WEP, TKIP or TKIP- AES (WPS2Mixed) for your AP, Samung TV will not upport a connection in compliance with new Wi-Fi certification pecification. x If your AP upport WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Puh Button Configuration) or PIN (Peronal Identification Number). WPS will automatically configure the SSID and WPA key in either mode. x If your router, modem, or device in t certified, it may not connect to the TV via the Samung Wirele LAN Adapter. x Connection Method: You can etup the wirele network connection ix way. Samung Auto Configuration PBC (WPS) Auto Setup (Uing the Auto Network Search function) Manual Setup SWL(Samung Wirele Link) Ad-Hoc x All of Samung Wirele LAN Adapter houd be connected directly to the TV' USB port. USB HUB are not upported. 28

29 Network Setup (Samung Auto Configuration) Thi function i available in AP (Acce Point) that upport Samung Auto Configuration. If your AP doe not, you can connect through PBC (WPS), auto, or manually. Thi function i available when SWL(Samung Wirele Link) i et to Off. You can check for equipment that upport Samung Auto Configuration on How to et up uing Samung Auto Configuration 1. Place the AP and TV next to each other and turn them on. Becaue the booting time of application differ, you may have to wait for approximately 2 minute. If the LAN cable connected the WAN port of AP during Samung Auto Configuration, you are able to complete until internet connection tet. If you do not connect, Samung Auto Configuration will check only device connecting of AP (Not check internet). 2. After 2 minute, connect the Samung Wirele LAN Adapter to the TV. When the Samung Wirele LAN Adapter i etablihed, the pop-up window appear. 3. A oon a a connection i etablihed, place the AP in parallel with the Samung Wirele LAN Adapter giving a gap no larger than 25cm. 4. Wait until the connection i automatically etablihed. If the connection fail, reet the AP and then try again. If Samung Auto Configuration doe not connect your TV to your AP, a pop-up window appear on the creen notifying you of the failure. Reet the AP, and then try again. If the connection fail again, chooe one of the other connection etup method, PBC (WPS), auto, or manual. 5. After the connection i etablihed, locate the harer at the deired location. If the AP etting have been changed or it i the firt time you ue the new AP after purchae, you need to et up again beginning from Step 1. Network Setup (PBC (WPS)) How to et up uing PBC (WPS) If your router ha a PBC (WPS) button, follow thee tep: 1. Connect your TV to your LAN a decribed in the previou ection. 2. Turn on your TV, pre the MENU button on your remote, ue the or button to elect Setup, and then pre the ENTERE button. 3. Ue the or button to elect Network in the Setup menu, and then pre the ENTERE button. 4. On the Network creen, elect Network Type. 5. Set Network Type to Wirele. 6. Select Network Setup. The Network Setup creen appear. Network Setup Select a network : Not Selected Internet Protocol Setup : Auto IP Addre : Subnet Mak : Gateway : DNS : Auto DNS Server : 7. Pre the Red button on your remote. 8. Pre the PBC (WPS) button on your router within 2 minute. Your TV player automatically acquire all the network etting value it need and connect to your network. 9. After the network connection i et up, pre the RETURN button to exit the Network Setup creen. Network Setup (Auto) PBC(WPS) U Move E Enter R Return Mot wirele network have an optional ecurity ytem that require device that acce the network to tranmit an encrypted ecurity code called an Acce or Security Key. The Security Key i baed on a Pa Phrae, typically a word or a erie of letter and number of a pecified length you were aked to enter when you et up ecurity for your wirele network. If you ue thi method of etting up the network connection, and have a Security Key for your wirele network, you will have to enter the Pa Phrae during the etup proce. How to et up automatically To et up the wirele connection automatically, follow thee tep: 1. Follow Step 1 through 6 in the How to et up uing PBC (WPS) procedure. 2. Pre the button to elect Internet Protocol Setup, and then pre the ENTERE button. Pre the or button to elect Auto, and then pre the ENTERE button. 3. Pre the button to go to Select a Network, and then pre the ENTERE button. The Network function earche for available wirele network. When done, it diplay a lit of the available network. 4. In the lit of network, pre the or button to elect a network, and then pre the ENTERE button. If the AP i et to Hidden (Inviible), you have to elect Add Network and enter the correct Network Name (SSID) and Security Key to etablih the connection. 04 Advanced Feature 29

30 Advanced Feature 5. If the Security/PIN pop-up appear, go to Step 6. If the Network Connecting Screen appear, go to Step Pre the or button to elect Security or PIN. For mot home network, you would elect Security (for Security Key). The Security Screen appear. Security Key Network Setup A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 7. On the Security creen, enter your network Pa Phrae. You hould be able to find the Pa Phrae on one of the et up creen you ued to et up your router or modem. 8. To enter the Pa Phrae, follow thee general direction: Pre the number button on your remote to enter number. Ue the direction button on your remote to move from button to button on the Security Key creen. Pre the Red button to change cae or diplay ymbol/character. To a enter letter or ymbol, move to the letter or ymbol, and then pre the ENTERE button. To delete the lat letter or number you entered, pre the Green button on your remote. 9. When done, pre the Blue button on your remote. The Network Connecting creen appear. 10. Wait until the connection confirmation meage i diplayed, and then pre the ENTERE button. The Network Setup creen re-appear. 11. To tet the connection, pre the RETURN button to elect Network Tet, and then pre the ENTERE button. 0~9 0 entered Number Lower cae Delete Space n Move E Enter R Return Network Setup (Ad-Hoc) You can connect to a mobile device without an acce point through the Samung Wirele LAN Adapter by uing a peer to peer network. Thi function i available when SWL(Samung Wirele Link) i et to Off. How to connect to new Ad-hoc device 1. Follow Step 1 through 6 in the How to et up uing PBC (WPS) (p. 29). 2. Chooe Select a network. A lit of device/network appear. 3. While in the device lit, pre the Blue button on the remote. The meage The exiting network ytem may have limited functionality. Do you want to change the network connection? i diplayed. 4. Input the generated Network Name (SSID) and Security Key into the device you want to connect. How to connect an exiting Ad-hoc device 1. Follow Step 1 through 6 in the How to et up uing PBC (WPS) (p. 32). 2. Chooe Select a network. The Device/Network lit appear. 3. Select the device you want in the Device lit. 4. If ecurity key i required, input the ecurity key. If network doen t operate normally, check the Network Name (SSID) and Security Key again. An incorrect Security Key may caue a malfunction. 30

31 Network Setup (Manual) If the other method do not work, you need to enter the Network etting value manually. Getting the Network Connection Value To get the Network connection value on mot Window computer, follow thee tep: 1. Right click the Network icon on the bottom right of the creen. 2. In the pop-up menu, click Statu. 3. On the dialog that appear, click the Support tab. 4. On the Support tab, click the Detail button. The Network etting are diplayed. How to et up manually To enter the Network connection value manually, follow thee tep: 1. Follow Step 1 through 6 in the How to et up uing PBC (WPS) (p. 29). 2. Pre the button to elect Internet Protocol Setup, and then pre the ENTERE button. Pre the or button to elect Manual, and then pre the ENTERE button. 3. Pre the button to go to the firt entry field (IP Addre). 4. Ue the number button to enter number. 5. When done with each field, ue the button to move ucceively to the next field. You can alo ue the other arrow button to move up, down, and back. 6. Enter the IP Addre, Subnet Mak, and Gateway value. 7. Pre the or button to go to DNS. 8. Pre the button to go to the firt DNS entry field. Enter the number a above. 9. When done, pre the button to go to Select a Network. Select your network, and then pre the ENTERE button. 10. Go to Step 4 in the How to et up automatically (p. 29), and follow the direction from that point on. SWL(Samung Wirele Link) Thi function let you connect a Samung device that upport the PBC (WPS) to your TV. You can connect device to the TV even if a harer i not connected to the TV. To ue the Internet@TV, the AP (acce point) mut be connected to the wirele network. If a Samung Wirele Lan Adapter i connected to the USB 2 port, the network may not operate normally. We recommend to connecting it to the USB 1 (HDD) port. Only harer uing the 2.4 Ghz band are upported. Sharer uing the 5 Ghz band are not upported. SWL connect You can directly connect a device that upport the PBC (WPS) to the TV. Thi function i available when SWL(Samung Wirele Link) i et to On. How to connect Samung Wirele Link For the procedure to etablih a connection, refer to the following: 1. Follow Step 1 through 5 in the How to et up uing PBC (WPS) (p. 29). 2. Select SWL(Samung Wirele Link) by uing the button and pre the ENTERE button to turn it On. 3. Select SWL connect by uing the button and pre the ENTERE button. 4. If the Pre the PBC button on the device which upport PBC button to connect within 120 econd meage appear, pre the PBC button on the device to connect. For more information, refer to the wirele network etup manual of the device to be connected. 5. If the device i connected properly to the TV after tarting count on meage box then meage box will be diappeared automatically. If the connection fail, pleae retry after 2 minute. If Your TV Fail to Connect to the Internet Your TV may not be able to connect to the Internet becaue your ISP ha permanently regitered the MAC addre (a unique identifying number) of your PC or modem, which it then authenticate each time you connect to the Internet a a way of preventing unauthorized acce. A your TV ha a different MAC addre, your ISP can not authenticate it MAC addre, and your TV can not connect. To reolve thi problem, ak your ISP about the procedure required to connect device other than a PC (uch a your TV) to the Internet. If your Internet ervice provider require an ID or paword to connect to the Internet, your TV may not be able to connect to the Internet. If thi i the cae, you mut enter your ID or paword when connecting to the Internet. The internet connection may fail becaue of a firewall problem. If thi i the cae, contact your Internet ervice provider. If you cannot connect to the Internet even after you have followed the procedure of your Internet ervice provider, pleae contact Samung Electronic at SAMSUNG. 04 Advanced Feature 31

32 Advanced Feature Media Play MEDIA.P Enjoy photo, muic and/or movie fi le aved on a USB Ma Storage Cla (MSC) device. O MENU m Application Content View Media Play ENTER E MediaPlay Video SUM Change Device View Device E Enter R Return Connecting a USB Device 1. Turn on your TV. 2. Connect a USB device containing photo, muic and/or movie fi le to the USB 1 (HDD) or USB 2 jack on the ide of the TV. 3. When USB i connected to the TV, popup window appear. Then you can elect Media Play. TV Rear Panel or USB Drive Connecting to your PC through a network You can play picture, muic and video aved on your PC through a network connection in the Media Play mode. If you want to ue Media Play to play file aved on your PC over your TV, you hould download PC Share Manager and uer manual from LAN PC TV Rear Panel or External Modem (ADSL/VDSL/Cable TV) Wirele IP harer Samung Wirele LAN Adapter LAN Cable (Not Supplied) 1. For more information on how to confi gure your network, refer to Network Connection (p. 26). You are recommended to locate both the TV and the PC in ame ubnet. The fi rt 3 part of the ubnet addre of the TV and the PC IP addree hould be the ame and only the lat part (the hot addre) hould be changed. (e.g. IP Addre: **) 2. Uing a LAN cable, connect between the external modem and the PC onto which the Samung PC Share Manager Program will be intalled. You can connect the TV to the PC directly without connecting it through a Sharer (Router). 32

33 Function that are not upported when connecting to a PC through a network: xthe Background Muic and Background Muic Setting function. xsorting file by preference in the Photo, Muic, and Video folder. x The (REW) or µ (FF) button while a movie i playing. The Divx DRM, Multi-audio, embedded caption i not upported. x The orting method may vary. xthe cene earch function may not be upported. x Samung PC Share manager hould be permitted by the firewall program on your PC. When you ue Media Play mode through a network connection, depending on the function of the provided erver: The Play Continuouly function, which reume playing of a video, may not be upported. The Play Continuouly function doe not upport multiple uer. (It will have only memorized the point where the mot recent uer topped playing.) x The or button may not work depending on the content information. x If you experience any file tuttering iue while playing a video over a wirele network, we recommend uing a wired network. It might not work properly with unlicened multimedia file. Need-to-Know Lit before uing Media Play xmtp (Media Tranfer Protocol) i not upported. xthe file ytem upport FAT16, FAT32 and NTFS. x Certain type of USB Digital camera and audio device may not be compatible with thi TV. x Media Play only upport USB Ma Storage Cla (MSC) device. MSC i a Ma Storage Cla Bulk-Only Tranport device. Example of MSC are Thumb drive, Flah Card Reader and USB HDD (USB HUB are not upported). Device hould be connected directly to the TV USB port. x Before connecting your device to the TV, pleae back up your file to prevent them from damage or lo of data. SAMSUNG i not reponible for any data file damage or data lo. x Connect a USB HDD to the dedicated port, USB 1 (HDD) port. x Do not diconnect the USB device while it i loading. x The higher the reolution of the image, the longer it take to diplay on the creen. xthe maximum upported JPEG reolution i 15360X8640 pixel. xfor unupported or corrupted file, the Not Supported File Format meage i diplayed. x If the file are orted by Baic View, up to 1000 file can be diplayed in each folder. x MP3 file with DRM that have been downloaded from a non-free ite cannot be played. Digital Right Management (DRM) i a technology that upport the creation, ditribution and management of the content in an integrated and comprehenive way, including the protection of the right and interet of the content provider, the prevention of the illegal copying of content, a well a managing billing and ettlement. x If more than 2 PTP device are connected, you can only ue one at a time. x If more than two MSC device are connected, ome of them may not be recognized. A USB device that require high power (more than 500mA or 5V) may not be upported. x If an over-power warning meage i diplayed while you are connecting or uing a USB device, the device may not be recognized or may malfunction. x If the TV ha been no input during time et in Auto Protection Time, the Screenaver will run. xthe power-aving mode of ome external hard dik drive may be releaed automatically when connected to the TV. x If a USB extenion cable i ued, the USB device may not be recognized or the file on the device may not be read. x If a USB device connected to the TV i not recognized, the lit of file on the device i corrupted or a file in the lit i not played, connect the USB device to the PC, format the device and check the connection. x If a file deleted from the PC i till found when Media Play i run, ue the Empty the Recycle Bin function on the PC to permanently delete the file. 04 Advanced Feature 33

34 Advanced Feature Screen Diplay Move to the deired file uing the up/down/right/left button and then pre the ENTERE or (Play) button. The file i played. Support the View Device and Home in Media Play homepage. Information: You can acertain the elected file name and the number of file and page. Video Movie 01.avi Movie 03.avi Movie 05.avi Sort Lit Section: Diplay the orting tandard. 1/1 Page /Movie 01.avi Jan Jan Jan Movie 07.avi Movie 02.avi Movie 04.avi Movie 06.avi Movie 09.avi different depending on the content. SUM Jan Jan Movie 08.avi Jan The orting tandard i Jan Jan Jan Movie 10.avi Select Change Device File Lit Section: You can confirm the file and group that are orted by category. Jan Sorting T Tool Operation Button Red (Change Device): Select a connected device. Green (Preference): Set the file preference. (not upported in Baic view) Yellow (Select): Select multiple file from file lit. Selected file are marked with a ymbol. Blue (Sorting): Select the ort lit. T Tool: Diplay the option menu. Uing the (REW) or µ (FF) button, file lit can move to next or previou page. Video Playing Video 1. Pre the or button to elect Video, then pre the ENTERE button in the Media Play menu. 2. Pre the / / / button to elect the deired video in the file lit. 3. Pre the ENTERE button or (Play) button. The elected file i diplayed on the top with it playing time. If video time information i unknown, play time and progre bar are not diplayed. During video playback, you can earch uing the and button. In thi mode, you can enjoy movie clip contained on a Game, but you cannot play the Game itelf. yy Supported Subtitle Format 00:04:03 / 00:07:38 Name File extenion MPEG-4 time-baed text.ttxt Format XML SAMI.mi HTML SubRip.rt tring-baed SubViewer.ub tring-baed Micro DVD.ub or.txt tring-baed SUM 34 1/1 Movie 01.avi E Paue L Jump T Tool R Return [UC USA]BN D-01Eng.indb 오전 10:15:35

35 y Supported Video Format File Extenion Container Video Codec Reolution *.avi *.mkv *.af AVI MKV ASF Frame rate (fp) Bit rate (Mbp) Divx 3.11 / 4.x / 5.1 / x ~ 30 8 XviD 1920x ~ 30 8 H.264 BP / MP / HP 1920x ~ MPEG4 SP / ASP 1920x ~ 30 8 Motion JPEG 800x600 6 ~ 30 8 Divx 3.11 / 4.x / 5.1 / x ~ 30 8 XviD 1920x ~ 30 8 H.264 BP / MP / HP 1920x ~ MPEG4 SP / ASP 1920x ~ 30 8 Motion JPEG 800x600 6 ~ 30 8 Audio Codec MP3 / AC3 / LPCM / ADPCM / DTS Core MP3 / AC3 / LPCM / ADPCM / WMA *.wmv ASF Window Media Video v9 1920x ~ WMA *.mp4 *.3gp *.vro *.mpg *.mpeg *.t *.tp *.trp MP4 3GPP VRO VOB PS TS H.264 BP / MP / HP 1920x ~ MPEG4 SP / ASP 1920x ~ 30 8 XVID 1920x ~ 30 8 H.264 BP / MP / HP 1920x ~ MPEG4 SP / ASP 1920x ~ 30 8 MPEG1 1920x / 25 / MPEG2 1920x / 25 / MPEG1 1920x / 25 / MPEG2 1920x / 25 / H x ~ MPEG2 1920x / 25 / H x ~ VC1 1920x ~ MP3 / ADPCM / AAC ADPCM / AAC / HE-AAC AC3 / MPEG / LPCM AC3 / MPEG / LPCM / AAC AC3 / AAC / MP3 / DD+ / HE-AAC 04 Advanced Feature Other Retriction NOTE x If there are problem with the content of a codec, the codec will not be upported. x If the information for a Container i incorrect and the file i in error, the Container will not be able to play correctly. x Sound or video may not work if the content have a tandard bitrate/frame rate above the compatible Frame/ec lited in the table above. x If the Index Table i in error, the Seek (Jump) function i not upported. Video Decoder Support up to H.264, Level 4.1 H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not upported. XVID, MPEG4 SP, ASP : Below 1280 x 720: 60 frame max Above 1280 x 720: 30 frame max GMC 2 over i not upported. H.263 i not upported. Only Samung Techwin MJEPG i upported. Audio Decoder Support up to WMA 7, 8, 9, STD WMA 9 PRO doe not upport 2 channel exce multi channel or lole audio. WMA ampling rate 22050Hz mono i not upported. 35

36 Advanced Feature Playing movie continuouly (Reume Play) If you exit the playing movie function, the movie can be played later from the point where it wa topped. If you pre the ENTERE button (Chaptering) during playing the file, you can explore cene divided into 5 chapter you want. 1. Select the movie file you want to play continuouly by preing the or button to elect it from the file lit ection. 00:04:03 / 00:07:38 1/1 2. Pre the (Play) / ENTERE button. Movie 01.avi 3. Select Play Continuouly (Reume Play) by preing the Blue button. The Movie will begin to play from where it wa topped. The Blue button i available when reuming play. If the Continuou Movie Play Help function i et to On in the Setting menu, a pop-up meage will appear Play continuouly Reume playing from the lat viewed when you reume play a movie file. cene. SUM Play continuouly E Chaptering L Jump T Tool R Return Muic Playing Muic 1. Pre the or button to elect Muic, then pre the ENTERE button in the Media Play menu. Playlit 3/15 2. Pre the / / / button to elect the deired Muic file in I Love You I Love you Jhon Jhon the file lit. Muic 1 3. Pre the ENTERE button or (Play) button. During muic playback, you can earch uing the and 1t Album No Singer Pop 2010 Muic 2 4.2MB No Singer Muic 3 No Singer button. 01:10 / 04:02 Muic 4 No Singer (REW) and µ (FF) button do not function during play. Muic 5 No Singer Only diplay the file with MP3 and PCM file extenion. Other file extenion are not diplayed, even if they are aved on the ame USB device. SUM E Paue L Jump T Tool R Return If the ound i abnormal when playing MP3 file, adjut the Equalizer in the Sound menu. (An over-modulated MP3 file may caue a ound problem.) Creating My Playlit 1. Pre the / / / button to elect the track you want to add and pre the TOOLS button. 2. Select Add My Playlit. 3. When the Add My Playlit menu appear, elect New My Playlit. To add to an old play lit, imply elect the play lit you want to add muic to. 4. The newly created or updated playlit will be in the main Muic page. Playing My Playlit Select the My Playlit folder and it will play automatically. Pre the or button to elect a different muic file within the play lit. 36

37 Photo Viewing a Photo (or Slide Show) 1. Pre the or button to elect Photo, then pre the ENTERE button in the Media Play menu. 2. Pre the / / / button to elect the deired photo in the file lit. 3. Pre the ENTERE button or (Play) button. While a photo lit i diplayed, pre the (Play) / ENTERE button on the remote control to tart the lide how. All file in the file lit ection will be diplayed in the lide how. During the lide how, file are diplayed in order. Muic file can be automatically played during the Slide Show if the Background Muic i et to On. The BGM Mode cannot be changed until the BGM ha finihed loading. SUM Normal Image1024.jpg 1024x /2/1 3/15 E Paue L Previou/Next T Tool R Return 04 Advanced Feature Playing Multiple File Playing elected video/muic/photo file 1. Pre the Yellow button in the file lit to elect the deired file. 2. Repeat the above operation to elect multiple file. NOTE x The c mark appear to the left of the elected file. x To cancel a election, pre the Yellow button again. x To deelect all elected file, pre the TOOLS button and elect Deelect All. 3. Pre the TOOLS button and elect Play Selected Content. Video /Movie 01.avi 2 file elected 1/1 Page Movie 01.avi Movie 02.avi Jan Jan Movie 03.avi Movie 04.avi Jan Jan Movie 05.avi Movie 06.avi Jan Jan Movie 07.avi Movie 08.avi Jan Jan Movie 09.avi Movie 10.avi Jan Jan Playing the video/muic/photo file group 1. While a file lit i diplayed, move to any file in the deired group. 2. Pre the TOOLS button and elect Play Current Group. SUM Change Device Select Sorting T Tool Media Play - Additional Function Sorting the file lit Pre the Blue button in the file lit to ort the file. Category Operation Video Muic Photo Baic View Diplay the whole folder. You can view the photo by electing the folder. > > > Title Sort and diplay the file title in Symbol/Number/Alphabet/Special order. > > > Preference Sort and diplay the file by preference. You can change the file preference in the file lit ection uing the Green button. > > > Latet Date Sort and how file by the latet date. > > Earliet Date Sort and how file by the earliet date. > > Artit Sort the muic file by artit in alphabetical order. > Album Sort the muic file by album in alphabetical order. > Genre Sort muic file by the genre. > Mood Sort muic file by the mood. You can change the muic mood information. > Monthly Sort and how photo file by month. > 37

38 Advanced Feature Video/Muic/Photo Play Option menu During file playback, pre the TOOLS button. Category Operation Video Muic Photo Title You can move directly to another Title. > Repeat Mode You can play movie and muic file repeatedly. > > Picture Size You can adjut the picture ize to your preference. (Mode1 / Mode2 / Original) > Picture Setting You can adjut the picture etting. (p. 16, 17, 18, 19) > > Sound Setting You can adjut the ound etting. (p. 19, 20) > > > Subtitle Setting You can play the video with Subtitle. Thi function only work if the ubtitle are the ame file name a the video. > Audio You can enjoy video in one of upported language a required. The function i only enabled when tream-type file which upport multiple audio format are played. > Stop Slide Show / You can tart or top a lide how. Start Slide Show > Slide Show Speed You can elect the lide how peed during the lide how. > Slide Show Effect You can et variou lide how effect. > Background Muic You can et and elect background muic when watching a lide how. > Zoom You can zoom into image in full creen mode. > Rotate You can rotate image in full creen mode. > Home Background You can move the file to the Media Play dektop. > Information You can ee detailed information about the played file. > > > Setting Uing the Setup Menu Background Setting: Select to diplay the background you want. Continuou Movie Play Help (Reume Play) (On / Off): Select to diplay the help pop-up meage for continuou movie playback. Get DivX VOD regitration code: Show the regitration code authorized for the TV. If you connect to the DivX web ite and regiter, you can download the VOD regitration file. If you play the VOD regitration uing Media Play, the regitration i completed. For more information on DivX VOD, viit Get DivX VOD deactivation code: When DivX VOD i not regitered, the regitration deactivation code i diplayed. If you execute thi function when DivX VOD i regitered, the current DivX VOD regitration i deactivated. Information: Select to view information about the connected device. 38

39 What i Anynet+? t Anynet+ Anynet+ i a function that enable you to control all connected Samung device that upport Anynet+ with your Samung TV remote. The Anynet+ ytem can be ued only with Samung device that have the Anynet+ feature. To be ure your Samung device ha thi feature, check if there i an Anynet+ logo on it. To connect to a Samung Home Theater 04 Advanced Feature TV Rear Panel Optical Cable (Not Supplied) Home Theater Anynet+ Device 1 Anynet+ Device 2, 3, 4 HDMI cable (Not Supplied) HDMI cable (Not Supplied) 1. Connect the HDMI IN (1(DVI), 2, 3 or 4) jack on the TV and the HDMI OUT jack of the correponding Anynet+ device uing an HDMI cable. 2. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the correponding Anynet+ device uing an HDMI cable. NOTE x Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the Home Theater. x When following the connection above, the Optical jack only output 2 channel audio. You will only hear ound from the Home Theater Front, Left and Right peaker and the ubwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the Amplifier or Home Theater, not the TV. x You can connect only one Home Theater. xyou can connect an Anynet+ device uing the HDMI cable. Some HDMI cable may not upport Anynet+ function. x Anynet+ work when the AV device upporting Anynet+ i in the tandby or on tatu. x Anynet+ upport up to 12 AV device in total. Note that you can connect up to 3 device of the ame type. 39

40 Advanced Feature Anynet+ Menu The Anynet+ menu change depending on the type and tatu of the Anynet+ device connected to the TV. Anynet+ Menu View TV Device Lit (device_name) MENU (device_name) INFO Recording: (*recorder) Stop Recording: (*recorder) Receiver Decription Change Anynet+ mode to TV broadcat mode. Show the Anynet+ device lit. Show the connected device menu. E.g. If a DVD recorder i connected, the dic menu of the DVD recorder will appear. Show the play menu of the connected device. E.g. If a DVD recorder i connected, the play menu of the DVD recorder will appear. Start recording immediately uing the recorder. (Thi i only available for device that upport the recording function.) Stop recording. Sound i played through the receiver. If more than one recording device i connected, they are diplayed a (*recorder) and if only one recording device i connected, it will be repreented a (*device_name). Setting Up Anynet+ OOMENUm Application Anynet+ (HDMI-CEC) ENTERE Setup Anynet+ (HDMI-CEC) (Off / On): To ue the Anynet+ Function, Anynet+ (HDMI-CEC) mut be et to On. When the Anynet+ (HDMI-CEC) function i diabled, all the Anynet+ related operation are deactivated. Auto Turn Off (No / Ye): Setting an Anynet+ Device to turn off automatically when the TV i turned off. The active ource on the TV mut be et to TV to ue the Anynet+ function. Even if an external device i till recording, it may turn off. Switching between Anynet+ Device 1. Anynet+ device connected to the TV are lited. If you cannot find a device you want, pre the Red button to refreh the lit. 2. Select a device and pre the ENTERE button. You can witch to the elected device. Only when you et Anynet+ (HDMI-CEC) to On in the Application menu, the Device Lit menu appear. x Switching to the elected device may take up to 2 minute. You cannot cancel the operation during the witching operation. x If you have elected external input mode by preing the SOURCE button, you cannot ue the Anynet+ function. Make ure to witch to an Anynet+ device by uing the Device Lit. Recording You can make a recording of a TV Program uing a Samung recorder. 1. Select Recording. When there are more than two recording device x When multiple recording device are connected, the recording device are lited. Select one recording device in the Device Lit. When the recording device i not diplayed, elect Device Lit and pre the Red button to earch device. 2. Pre the EXIT button to exit. You can record the ource tream by electing Recording: (device_name). Preing the (REC) button will record whatever you are currently watching. If you are watching video from another device, the video from the device i recorded. Before recording, check whether the antenna jack i properly connected to the recording device. To properly connect an antenna to a recording device, refer to the recording device uer manual. 40

41 Litening through a Receiver You can liten to ound through a receiver (i.e Home Theater) intead of the TV Speaker. 1. Select Receiver and et to On. 2. Pre the EXIT button to exit. x If your receiver upport audio only, it may not appear in the device lit. x The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV. NOTE x x x x When the receiver (i.e Home Theater) i et to On, you can hear ound output from the TV Optical jack. When the TV i diplaying a DTV (air) ignal, the TV will end out 5.1 channel ound to the receiver. When the ource i a digital component uch a a DVD and i connected to the TV via HDMI, only 2 channel ound will be heard from the receiver. You can only control Anynet+ device uing the TV remote control, not the button on the TV. The TV remote control may not work under certain condition. If thi occur, reelect the Anynet+ device. The Anynet+ function do not operate with other manufacturer product. 04 Advanced Feature Troublehooting for Anynet+ Problem Poible Solution Anynet+ doe not work. Check if the device i an Anynet+ device. The Anynet+ ytem upport Anynet+ device only. Only one receiver (home theater) can be connected. Check if the Anynet+ device power cord i properly connected. Check the Anynet+ device Video/Audio/HDMI cable connection. Check whether Anynet+ (HDMI-CEC) i et to On in the Anynet+ etup menu. Check whether the TV remote control i in TV mode. Check whether the remote control i Anynet+ compatible. Anynet+ doen t work in certain ituation. (Searching channel, operating Media Play or Plug & Play (initial etup), etc.) When connecting or removing the HDMI cable, pleae make ure to earch device again or turn your TV off and on again. Check if the Anynet+ Function of Anynet+ device i et on. I want to tart Anynet+. Check if the Anynet+ device i properly connected to the TV and check if the Anynet+ (HDMI-CEC) i et to On in the Anynet+ Setup menu. Pre the TV button on the TV remote control to witch to TV. Then pre the TOOLS button to diplay the Anynet+ menu and elect a menu you want. I want to exit Anynet+. Select View TV in the Anynet+ menu. Pre the SOURCE button on the TV remote control and elect a non- Anynet+ device. Pre z, PRE-CH, and FAV.CH to change the TV mode. (Note that the channel button operate only when a tuner-embedded Anynet+ device i not connected.) The meage Connecting to Anynet+ device... appear on the creen. You cannot ue the remote control when you are configuring Anynet+ or witching to a view mode. Ue the remote control when the Anynet+ etting or witching to view mode i complete. The Anynet+ device doe not play. You cannot ue the play function when Plug & Play (initial etup) i in progre. The connected device i not diplayed. The TV Program cannot be recorded. The TV ound i not output through the receiver. Check whether or not the device upport Anynet+ function. Check whether or not the HDMI cable i properly connected. Check whether Anynet+ (HDMI-CEC) i et to On in the Anynet+ etup menu. Search Anynet+ device again. You can connect an Anynet+ device uing the HDMI cable only. Some HDMI cable may not upport Anynet+ function. If connection i terminated becaue there ha been a power interruption or the HDMI cable ha been diconnected, pleae repeat the device can. Check whether the antenna jack on the recording device i properly connected. Connect the optical cable between TV and the receiver. 41

42 Advanced Feature Getting Started bring ueful and entertaining INTERNET content and ervice directly from the web to your TV. Recommended My Application by Date 1/1 O MENU m Application Content View Internet@TV ENTER E NOTE Configure the network etting before uing Internet@TV. For more information, refer to Network Connection (p. 26). Unupported font within the provider content will not diplay normally. Slow repone and/or interruption may occur, depending on your network condition. Depending on the region, may be the only language upported for widget ervice. Thi feature i not available in ome location. If you experience a problem uing a application, pleae contact the content provider. According to circumtance of the content provider, an application update or the application itelf may be dicontinued. Depending on your country regulation, ome application may have limited ervice or not be upported. Screen Diplay Samung App Setting Login Mark a Favorite Sort by R Return TV Screen: Diplay the current channel. Information: Diplay notice, new application, and advertiemevnt brought to you by Samung product introduction. Application ervice: You can experience variou ervice by provided amung. Samung App Setting Internet@TV Setting: Edit and confi gure application and Internet@TV etting. Recommended My Application by Date 1/1 Login Mark a Favorite Sort by R Return Recommended Application: Diplay the recommended ervice by Samung. You are not able to add or delete a ervice in thi lit. Downloaded Application: Diplay the downloaded application through the Samung App. Control: Red ( Login ): To log in to to Internet@TV. Green ( Mark a Favorite ): To mark the application a a favorite. Blue ( Sort by ): To ort the application. R Return : To return to the previou menu. The color button may work differently depending on the application. 42

43 Account Login For a application with multiple account, ue and to acce the different account. For a more enjoyable application experience, regiter and log in to your account. For intruction on creating an account, refer to Setting Internet@TV ID Create. 1. Pre the Red button in the Internet@TV home page. 2. Select deired Uer account, then pre the ENTERE button. If you want to create an account, pre the Red button; then create account OSD window appear. 3. After electing Uer account, then enter the Paword uing the number button on the remote controller. When login ucceed, Uer account will be diplayed on the creen. Setting up Internet@TV Setting Uer account : Paword : Login admin Create [0~9] Enter PIN R Cancel Create ID and configure Internet@TV etting from thi creen. Highlight Setting uing the and button and pre the ENTERE button. Setting Sytem Setup Ticker Autorun (Off / On): Enable/diable Ticker Autorun upon powering on the TV. The Ticker application provide ueful New, Weather, and Stock Market information. The Ticker application on Internet@TV mut be downloaded to ue thi feature. Depending on your country, Ticker application may have different ervice or not be upported. Channel Bound Service (Off / On): Some channel upport application a an Internet data ervice, allowing you to acce the Internet ervice while watching TV. Only available if upported by the broadcater. Reet: Reet Internet@TV etting to factory default etting. Change the Service Lock paword The default paword et i If you forget the paword you created, pre the following equence of remote control button to reet the paword to : POWER (off) MUTE POWER (on). Internet@TV ID You can ue thi menu when creating and deleting the account. You can control your account including content ite account information. Account i only for internet@tv. Create: Create an account and link it with deired ervice application. NOTE x Maximum number of account i 10. x Maximum number of character i Advanced Feature Sytem etup Internet@TV ID Service Manager Propertie Ticker Autorun : Off Channel Bound Service : Off Change the Service Lock paword Reet R Return 43

44 Advanced Feature How to create ID Before create Uer account, you hould download the application firt on the Samung App. 1. Uing the / / / button, elect Setting. Pre the ENTERE button. 2. Pre the button to elect Internet@TV ID, then pre the ENTERE or button. 3. Select Create. The Keypad creen will appear. 4. The keypad OSD will be diplayed on the creen. Uing the Keypad Preing the button on the remote while you are uing the Screen Keypad enable you to change the text field to lower cae, upper cae, number and icon. You can ue thi Screen Keypad in a everal Internet@ TV application. Here i how to input character For example, uppoe that you want to input 105Chang Pre the button on the remote twice to change the input mode from lower cae to number Pre the 1, 0 and 5 button in numerical order Pre the button on the remote 3 time to change the input mode from number to upper cae Pre the 2 button on the remote 3 time to input C Pre the button on the remote 3 time to change the input mode from upper cae to lower cae Pre button on the remote to input the ret of Chang. When done, pre the ENTERE button. 5. Uing the number button, enter the Uer account and Paword. xpaword mut be number only. x You can delete the entered character uing the PRE-CH button. x Uing the (REW) or μ (FF) button, you can elect icon you want to enter in icon keypad creen. 6. Account created. You can ue the ervice provided by all uer of your Samung TV with a ingle login by linking the uer account to the TV ID. If you want to regiter a ervice ite ID, elect Ye. Service Site lit will appear on the creen. 7. Select Regiter of the Service Site you want, then pre the ENTERE button. 8. Uing number button, enter your application ite ID and paword. Pre the ENTERE button. 9. Regitered uccefully. If you add another ervice ite, elect Ye. then pre the ENTERE button, go to tep When completed, elect OK. Pre theentere button. Manager Service Site: Regiter login information for ervice ite. Change Paword: Change account paword. Delete: Delete the account. Service Manager: Delete and lock application intalled to Internet@TV. Lock: Lock the application. Acceing a locked application require the paword. Delete: Delete the application. Propertie: Diplay information about Internet@TV. Ue the Check the peed of your internet connection option to tet your network connection. 44

45 Uing the ervice Samung App Samung App i a tore for downloading application to be ued on Samung TV/AV equipment. Uer can enjoy a variety of content like video, muic, photo, game, ueful information etc. uing the downloaded application. Additional application will be available in the future. Samung App What New? Video Sport Game Lifetyle Information Other My Page Help Featured Mot downloaded Mot recent Name YouTube You Tube Free TV tore Tet Uer002 Login Thumbnail View Sort By R Return Uing the color button with the Samung App. x Red (Login): To log in to the internet ervice. x B Green (Thumbnail View): To change the view mode. x Blue (Sort by): To ort the application by Featured, Mot downloaded, Mot recent or Name. x R Return: Move to previou menu. Uing the Samung App by category The following categorie are available: y What New?: Diplay newly regitered application. y Video: Diplay variou video media uch a movie, TV how and hort length video. y Sport: Diplay variou port media uch a match information, image and hort length video. y Game: Diplay variou game uch a udoku and che. y Lifetyle: Include variou lifetyle media ervice uch a muic, peronal photo management tool and ocial networking uch a Facebook and Twitter. y Information: Include variou information ervice uch a new, tock and weather. y Other: Include other micellaneou ervice. y My Page: Diplay the application lit and your cyber cah balance. Starting in the middle of 2010 (US and Korea only), you can purchae cyber-cah for buying application through tv.amung.com. y Help: If you have quetion about Internet@TV, check thi ection firt. 04 Advanced Feature 45

46 Advanced Feature Yahoo YAHOO! provide an integrated Internet and televiion experience powered by the Yahoo! Widget Engine. You can monitor fi nancial tock, hare photo with friend and family, and track new and weather all through the Yahoo! Widget Engine. When running for the firt time, you will be prompted to configure the baic etting. Depending on your country regulation, ome application may have limited ervice or not be upported. Screen Diplay Dock Mode Hello John! 5:15 AM Mon January 19th Viewport Edit Snippet Welcome Banner: Show your profi le. Blue ( Viewport ): Toggle between Viewport and Overlay mode. Yellow ( Edit Snippet ): To edit nippet with a help window. In Viewport mode, the TV or video play in a caled-down area with graphic outide. In overlay mode, the graphic are diplayed on top of the TV or video. Signed in a John Sidebar Mode WEATHER Widget Gallery FINANCE Dock: Diplay your nippet. Snippet are quick launch icon for your widget. PROFILE Widget and Widget Gallery cannot be deleted. FINANCE My Stock To remove a tock ymbol, pleae elect it from the lit below. ^DJI ^IXIC YHOO AAPL INTC AMZN PAGE 1 OF 2 Add New Symbol... Import Symbol From Yahoo!... Diplay Format About Yahoo! Finance... Value Widget logo and Current menu. Content Lit : The current election i highlighted in blue. Diplay the current page and number of total page. Control: Red: To cloe the widget. If you want to ee the Dock mode, pre the YAHOO! button. Green: To change the widget etting. Yellow: To manage your nippet. Blue: To ize video to fi t or diplay in full creen. Some button may not be available with certain widget. Editing Snippet in the Dock 1. Edit a nippet by electing in the dock and preing the Yellow button. 2. The nippet move to the Second poition and it tile lide up to how the following help text: Uing the color button with the dock mode. Red ( Delete ): To remove the widget. Deleted widget can be retored from Widget Gallery. Blue ( Move ): To rearrange nippet. Yellow ( Done ): To exit the Edit Snippet menu. 46

47 PROFILE Widget Set up uer profile through Profile Widget. You can et up multiple profile, each with it own lit of widget. Ue the Switch Profile option to witch to a different uer profile. There mut be at leat two regitered profile. For intruction on adding a profile, refer to Adminitrative Control. y Ue the Profile Setting option to cutomize and protect your profile. Uer profile can be cutomized with a unique name and avatar (a picture ued to repreent your profile). Your profile name and avatar are diplayed in the profile nippet in the dock. Protect your profile uing the Create Profile PIN option. When etting up a new PIN, you can et a Security Quetion. y The Profile Setting option limit acce to the profile widget. If you forget your Profile PIN, anwer your profile Security Quetion. New widget cannot be added to profile with Limit Profile indicator enabled. Owner PIN mut be et to ue thi feature. For intruction on etting Owner PIN, refer to Adminitrative Control. y Sytem Setting allow you to: Change your Location and Zip Code (US only) to tailor content pecific to your region. Replay the tutorial that wa hown during guided etup. Retore Factory Setting reet all widget etting and information. When you cannot run Retore Factory Setting normally or you can not intall/run the pecific widget normally, pre the remote control button in the following equence, which reet the Yahoo Service: POWER (on) MUTE EXIT POWER (off) POWER (on) YAHOO! (If Yahoo Service i diplayed on TV Screen, You hould top the Yahoo Service uing EXIT button in advance.). y From the Adminitrative Control menu you can: Configure Screen Saver timeout to avoid creen burn-in. Create Owner PIN and et a Security Quetion to control other profile. Create and configure a new profile with a unique et of widget. Delete an exiting profile. y Sign into Yahoo! from PROFILE Widget uing your Yahoo! ID. If you have a Yahoo! ID, you can acce peronalized content uing Yahoo! TV widget. You will be automatically igned-in to all intalled Yahoo! TV widget with your profile Yahoo! ID. If you do not have a Yahoo! account, viit www. yahoo.com to create one. You may not be able to log in with an ID created through a Yahoo webite in a country that doe not upport Internet@TV. y About Profile Widget: Pre the Green button to view a brief decription of Profile Widget, Copyright Policy, Term of Service, and Privacy Policy. Widget Gallery Ue Yahoo! Widget Gallery to add more widget to your TV. View available TV widget in the following categorie: Featured: Diplay recommended widget. Latet: Diplay the mot recent widget. All widget: Diplay all widget. Categorie: Diplay all widget by category. To intall a widget, navigate to the detail creen and elect Add Widget to My Profile and pre ENTERE. The widget will be intalled and become available in the dock. Featured Latet All widget Categorie Widget Gallery Setting: Pre the Green button. About Yahoo! Widget Gallery...: You can view brief information for the Widget Gallery, Copyright Policy, Term of Service, and Privacy Policy. TV Widget Software: Diplay the current verion of the ytem oftware, and intalled widget. Create your own widget through the Developer Setting menu. For more information, viit our developer ite at 04 Advanced Feature 47

48 Advanced Feature Troublehooting for Problem Some application content only have. How can I change the language? Some application ervice do not work. When a network error occurred, I can t ue other menu except etting menu. Poible Solution The Application content language may be different from the application uer interface language. It depend on ervice provider. Check with the ervice provider. Refer to the help webite for application ervice provider information. If network connection doen t work, your ervice might be limited, a all function except the etting menu are needed to connect to the internet. All content and ervice acceible through thi device belong to third partie and are protected by copyright, patent, trademark and/or other intellectual property law. Such content and ervice are provided olely for your peronal noncommercial ue. You may not ue any content or ervice in a manner that ha not been authorized by the content owner or ervice provider. Without limiting the foregoing, unle exprely authorized by the applicable content owner or ervice provider, you may not modify, copy, republih, upload, pot, tranmit, tranlate, ell, create derivative work, exploit, or ditribute in any manner or medium any content or ervice diplayed through thi device. YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF THE DEVICE IS AT YOUR SOLE RISK AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE AND ACCURACY IS WITH YOU. THE DEVICE AND ALL THIRD PARTY CONTENT AND SERVICES ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED. SAMSUNG EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH RESPECT TO THE DEVICE AND ANY CONTENT AND SERVICES, EITHER EXPRESS OR, IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY, OF SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, OF ACCURACY, OF QUIET ENJOYMENT, AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND DOES NOT WARRANT THAT THE DEVICE, CONTENT OR SERVICES WILL MEET YOUR REQUIREMENTS, OR THAT OPERATION OF THE DEVICE OR SERVICES WILL BE UNINTERRUPTED OR ERROR-FREE. UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF THE DEVICE, OR ANY CONTENT OR SERVICE ACCESSED BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Third party ervice may be changed, upended, removed, terminated or interrupted, or acce may be diabled at any time, without notice, and Samung make no repreentation or warranty that any content or ervice will remain available for any period of time. Content and ervice are tranmitted by third partie by mean of network and tranmiion facilitie over which Samung ha no control. Without limiting the generality of thi diclaimer, Samung exprely diclaim any reponibility or liability for any change, interruption, diabling, removal of or upenion of any content or ervice made available through thi device. Samung may impoe limit on the ue of or acce to certain ervice or content, in any cae and without notice or liability. Samung i neither reponible nor liable for cutomer ervice related to the content and ervice. Any quetion or requet for ervice relating to the content or ervice hould be made directly to the repective content and ervice provider. Help Webite Acceing tep may be changed in the future. It can be different link for pecial countrie. Country USA Canada Mexico Webite conumer product Televiion medi@2.0 Internet@TV conumer product TV medi@2.0 Internet@TV produit grand public télévieur medi@2.0 Internet@TV producto de conumo televiore medi@2.0 Internet@TV 48

49 AllShare OO MENUm Application Content View AllShare ENTERE About AllShare AllShare connect your TV and compatible Samung mobile phone/ device through a network. On your TV, you can view call arrival, SMS meage and chedule et on your mobile phone. In addition, you can play media content including video, photo and muic aved on your mobile phone or the other device (uch a your PC) by controlling them on the TV via the network. Additionally, you can ue your TV for browing web page in your mobile phone. For more information, viit or contact the Samung call center. Mobile device may need additional oftware intallation. For detail, refer to each device uer guide. Setting Up AllShare Setup Meage (On / Off): Enable or diable the meage function (for call arrival, SMS meage and chedule et on your mobile phone). Media (On / Off): Enable or diable the media function. When the media function i on, it play video, photo and muic from a mobile phone or other device that upport AllShare. ScreenShare (On / Off): Enable or diable the ScreenShare function for uing mobile phone a a remote control. TV name: Set the TV name o you can find it eaily on a mobile device. If you elect Uer Input, you can type on the TV uing the OSK (On Screen Keyboard). AllShare Setup Meage Meage Media : On : On 3/7 Meage / Media / ScreenShare Show a lit of mobile phone or connected device which have been et up with thi TV for uing the Meage, Media, or ScreenShare function. The Media function i available in all mobile device which upport AllShare. Allowed / Denied: Allow/Block the mobile phone. Delete: Delete the mobile phone from the lit. Thi function only delete the name of the mobile from the lit. If the deleted mobile device i turned on or try to connect to the TV, it may appear on the lit again. Uing the Meage Function Uing thi function, you view call arrival, SMS meage and chedule et on the mobile phone through the alarm window while watching TV. NOTE x To diable the alarm window, et Meage to Off in Setup of AllShare. x If OK i elected, or if OK i not elected after the meage ha appeared three time, the meage will be deleted. The meage i not deleted from the mobile phone. x The alarm window can be diplayed while uing ome application uch a Media Play etc. To view the content of a meage, witch to TV viewing mode. x When a meage from an unknown mobile phone i diplayed, elect the mobile phone on the meage menu in AllShare and elect Denied to block the phone. Meage View If a new SMS meage arrive while you are watching TV, the alarm window appear. If you click the OK button, the content of the meage are diplayed. You can configure the viewing etting for SMS meage on your mobile phone. For the procedure, refer to the mobile phone manual. Some type of character may be diplayed a blank or broken character. 04 Advanced Feature Media ScreenShare ScreenShare TV name : On : Home TV E Select R Return e Exit Setup R Return 49

50 Advanced Feature Call Arrival Alarm If a call arrive while you are watching TV, the alarm window appear. Schedule Alarm While you are watching TV, the alarm window appear to diplay the regitered event. You can configure viewing etting for chedule content on your mobile phone. For the procedure, refer to the mobile phone manual. Some pecial character may be diplayed a blank or broken character. Uing the Media Function An alarm window appear informing the uer that the media content (video, photo, muic) ent from a mobile phone will be diplayed on your TV. The content are played automatically 3 econd after the alarm window appear. If you pre the RETURN or EXIT button when the alarm window appear, the media content are not played. NOTE x If the media function execute for the firt time, the warning popup window appear. Pre the ENTERE button to elect Allow, then you can ue Media function on that device. "Unknown Device 0" i requeting that the media file be allowed to play. If you wih to allow the media file to be played at your device, pleae pre "Allow", otherwie pre "Deny". You can alo change the etting (or reetting) of thi feature at "AllShare Setup". Warning: Pleae note that if your device i connected to unecured or unfamiliar network, unwanted or inappropriate content might be played. If you are not ure about the network' identity or content' appropriatene, we trongly recommend that you do not "Allow" the requet to play. Allow Deny x To turn off the media content tranmiion from the mobile phone, et Media to Off in the AllShare etup. x Content may not be played on your TV depending on their reolution and format. x The ENTERE and / button may not work depending on the type of media content. x Uing the mobile device, you can control the media playing. For detail, refer to each mobile uer guide. x When you want to play media content from your PC, elect the PC icon on the main diplay of AllShare. Then the TV Media Play menu automatically change. For more detail information, refer to Media Play (p. 32). Uing ScreenShare Function Uing ScreenShare, you can browe variou web content provided by the mobile phone. For example, the image below diplay an acce page for content on a mobile. You can read the mobile file and view the phone book and calendar on the TV. Alo, in the phone book, you can make a call to another peron, or end to SMS. NOTE x You mut have ScreenShare intalled on your Samung Mobile phone/device to ue thi feature. x Doc Viewer can read file in doc format, but cannot modify them. x The creen diplay may differ depending on the connected device. My Mobile Contact Calendar Doc Viewer E Select Return Uing your Samung phone to control your TV Simply Before you can ue thi feature, you mut connect to a Samung mobile phone that upport ScreenShare function. When operating the TV with your mobile phone, only the POWER, y, z and MUTE button are upported. Even if you keep preing down on a control button (channel or volume) on the mobile phone, the value will only go up or down by one unit. 50