Graber Virtual Cord Fresco Roman Shades Specification
|
|
- Harvey Bond
- 5 years ago
- Views:
Transcription
1 Features Graber Virtual Cord Fresco Roman Shades Specification Motorized Blind and Shade Features Refer to individual price list for specific option and size information for the product being ordered. NOTE: Not every product will have a Virtual Cord control remote. Radio Frequency (RF) Features Graber Virtual Cord motorized shades feature advanced radio technology which provides reliable, effortless operation of window coverings. The radio technology utilized is Z-Wave which is supported by an alliance of countless smart home products and home automation providers making integration simple and inexpensive. Graber Virtual Cord motorized shades are quiet, simple to install and adjust, and simple to operate. These automated shades also feature: Simple, intuitive control by means of the unique Virtual Cord control (optional) Single-channel and multi-channel remotes are also available to control shades individually or in a group Shades can be conveniently operated from virtually anywhere in the home, up to 65 feet (19.9 m) Consistent motor speed regardless of size or weight Efficiently manages energy (heat gain and loss) A safer alternative to accessible cords that are traditionally used to operate window coverings; ideal for homes with children and pets Clean design with LED operation confirmation Push button control on shade end cap provides both a programming function at set-up and shade operation should the control be misplaced LED feedback on controls simplify operation and programming Quiet, smooth shade operation Limit safety protection feature simplifies reprogramming, should it be necessary, while protecting the shade from damage Convenient soft-start and soft-end add a touch of class to shade travel Low voltage motorization requires no costly electrical hard-wiring Home automation is simple to integrate with motorized shades Control Options Available Virtual Cord: simple, convenient control at the window shade location or control across the room Attached to the Window Molding Attached to the Window Sill Attached to the Wall Virtual Cord Control Store in a Drawer On a Table Mounted by the Door Single-channel remote: control can be conveniently mounted or placed on a table and controlled from anywhere in the room Create group shade control Set and control an intermediate position (home) Multi-channel remote: control can be conveniently mounted or placed on a table and controlled from anywhere in the room Individual shade control Create group shade control Set and control an intermediate position (home) Single-Channel Remote Control Multi-Channel Remote Control 2 graberdirect.com 2 1 Month Year
2 Features Single-Channel Remote Mounting Options Single-Channel Remote Control Optional Decorator Wall Plate Mount (see Virtual Cord options for details) Multi-Channel Remote Mounting Options Multi-Channel Remote Control Month Year 3 2 Graber 3
3 Fresco Roman Shades Motorized Lift Size Considerations Refer to individual price list for specific option and size information for the product being ordered. Features Simple, intuitive control by means of the unique Virtual Cord control Single-channel and multi-channel remotes are also available to control shades individually or in a group Shades can be conveniently operated from virtually anywhere in the home, up to 65 feet (19.9 m) Consistent motor speed regardless of size or weight Efficiently manages energy (heat gain and loss) A safer alternative to accessible cords that are traditionally used to operate window coverings; ideal for homes with children and pets Clean design with LED operation confirmation Push button control on shade end cap provides both a programming function at set-up and shade operation should the control be misplaced LED feedback on controls to simplify operation and programming Quiet, smooth shade operation Limit safety protection feature, which simplifies reprogramming (should it be necessary) while protecting the shade from damage Convenient soft-start and soft-end that add a touch of class to shade travel Low voltage motorization; no costly electrical hard-wiring required Powered with batteries, plug-in transformer, or multi motor power supply Motor located on right side within headrail Available with both flat and looped styles Available with fabric valances, wood valances, and cornices Available with bead and gimp trim on fabric valances Not available with bottom up/top down or multiple shades on one headrail Not available with hold down brackets or side mount brackets Control and Power Options Multiple control and power options available; see Virtual Cord options for availability NOTE: Motorization components and accessories have a five-year limited warranty, excluding batteries. Roman Size Considerations Roman Shades: Classic Flat or Looped Minimum Width* inches (cm) Maximum Width inches (cm) *For all inside mount applications, 3 8" (1.0 cm) deduction is taken by manufacturer on overall width. Based on fabric width. Minimum Height inches (cm) Maximum Height inches (cm) 20 (50.8) 76 (193.1) 18 (45.8) 96 (243.9) Month Year 7 3 Graber 5
4 Fabric Styles and Information Fresco Roman Features Features Fabric Styles Fabric Width inches (cm) Light Control Privacy Color to Street Side Fabric Content Cristale 72 (182.9) Light filtering Moderate Neutral 100% polyester with polyester backing Crossweave 72 (182.9) Light filtering Moderate Neutral 100% polyester with polyester backing Desert 72 (182.9) Light filtering Moderate Neutral 100% polyester with polyester backing Grasses 72 (182.9) Light filtering Moderate Neutral 88% polyester/7% cotton/5% flax Madrid 72 (182.9) Light filtering Moderate Neutral 100% polyester with polyester backing Regal 72 (182.9) Light filtering/room darkening Moderate/ complete Neutral 100% polyester with polyester backing Royale 72 (182.9) Light filtering Moderate Neutral 100% polyester with polyester backing Suburban 72 (182.9) Blackout Complete Neutral 100% polyester with polyester backing Versailles 72 (182.9) Light filtering/room darkening Moderate/ complete Neutral 100% polyester with polyester backing Light Control and Privacy Light Filtering: Allows light to gently filter through and provides privacy. Images and shapes may be seen through these shades, but details are not visible. Deep fabric color provide moderate light control; light color provide lower light control. Room Darkening: Allows some light to filter into the room and provides privacy. Objects in a lit room seen through these shades appear as vague shapes. Deep fabric color darken a room; light color filter and diffuse bright sunlight. Fabric Disclaimers To ensure color consistency and avoid dye lot variation, please order all shades for the same room at the same time. Fabrics cannot be seamed or overlapped. Colors may appear to vary depending on the time of day and lighting type as well as when the shade is partially or fully lowered. February Graber 3
5 General Information Shade Stack Height Chart Looped Finish Shade Height inches (cm) Stack Height inches (cm) Up to 29 (73.7) 9 (22.9) 29 to 41 (73.7 to 104.2) 10 (25.4) 41 to 58 (104.2 to 147.4) 11 (28.0) 58 to 75 (147.4 to 190.5) 12 (30.5) 75 to 96 (190.5 to 243.9) 13 (33.1) Flat Finish Shade Height inches (cm) Stack Height inches (cm) Up to 32 (81.3) 10 (25.4) 32 to 56 (81.3 to 142.3) 11 (28.0) 56 to 80 (142.3 to 203.2) 12 (30.5) 80 to 96 (203.2 to 243.9) 13 (33.1) NOTE: Stack height includes headrail and sill rail. This chart is an approximation of the largest stack possible for all control types at each height range. Bottom Panel Heights The standard panel height is 6" (15.3 cm) for flat and " (11.0 cm) for looped style. Bottom panel is used as the adjustment panel to get to finished shade height. The bottom panel height varies depending on shade height. A small change in finished shade height can create significantly different looks. For Example: Finished Shade Height* inches (cm) Number of Full Panels Flat Approximate Bottom Panel Height inches (cm) Number of Full Panels Looped Approximate Bottom Panel Height inches (cm) 60 (152.4) (13.7) (8.6) 61 (155.0) (1.0) 14 0 (0.0) 61 (155.0) (1.0) 14 0 (0.0) 62 (157.5) (3.5) 14 1 (2.6) *Approximate. IMPORTANT ORDERING NOTE: For shades hanging in the same room at the same height or for groups of shades, please add the words hanging side-by-side to the order comments. This is important for the manufacturing process and for panel adjustments. It is very important to consider this possible variation when ordering more than one shade for a room. For approximate panel counts see the following pages. 60" (152.4 cm) 61" (152.4 cm) Bottom Panel Flat panel is shown. 16 graberdirect.com 5 February 2018
6 General Information Panel Count Chart: Cordless Lift, Continuous-Loop Lift, and Motorized Lift The purpose of this information is to help the consumer visualize what their shade will look like by approximating the number of full panels and the bottom panel length. Full panel lengths are 6" (15.3 cm) for flat and " (11.0 cm) for looped; however, the bottom panel is used as the adjustment panel to get to finished shade height. Therefore, the bottom panel length varies depending on shade height. A small change in finished shade height can create significantly different looks. This chart should be used to compare the effect of various lengths. The information can vary depending on the pleat length tolerance. Finished Shade Height* inches (cm) Number of Full Panels Flat Approximate Bottom Panel Height inches (cm) Number of Full Panels Looped Approximate Bottom Panel Height inches (cm) 18 (45.8) (11.5) (9.3) 19 (48.3) (14.0) (0.7) 20 (50.8) (1.3) (3.2) 21 (53.4) (3.9) (5.8) 22 (55.9) (6.4) (8.3) 23 (58.5) (8.9) (10.8) 24 (61.0) (11.5) 5 1 (2.6) 25 (63.5) (14.0) 5 2 (5.1) 26 (66.1) (1.3) 5 3 (7.7) 27 (68.6) (3.9) 5 4 (10.2) 28 (71.2) (6.4) (1.6) 29 (73.7) (8.9) (4.2) 30 (76.2) (11.5) (6.7) 31 (78.8) (14.0) (9.3) 32 (81.3) (1.3) (1.0) 33 (83.9) (3.9) (3.5) 34 (86.4) (6.4) (6.1) 35 (88.9) (8.9) (8.6) 36 (91.5) (11.5) 8 0 (0.0) 37 (94.0) (14.0) 8 1 (2.6) 38 (96.6) (1.3) 8 2 (5.1) 39 (99.1) (3.9) 8 3 (7.7) 40 (101.6) (6.4) 8 4 (10.2) 41 (104.2) (8.9) (2.0) 42 (106.7) (11.5) (4.5) 43 (109.3) (14.0) (7.0) 44 (111.8) (1.3) (9.6) 45 (114.3) (3.9) (1.0) 46 (116.9) (6.4) (3.5) 47 (119.4) (8.9) (6.1) 48 (122.0) (11.5) (8.6) 49 (124.5) (14.0) (0.4) 50 (127.0) (1.3) (2.9) 51 (129.6) (3.9) (5.4) 52 (132.1) (6.4) (8.0) 53 (134.7) (8.9) (10.5) 54 (137.2) (11.5) (2.0) 55 (139.7) (14.0) (4.5) 56 (142.3) (1.3) (7.0) 57 (144.8) (3.9) (9.6) Finished Shade Height* inches (cm) Number of Full Panels *Finished shade height equals ordered height; there are no factory deductions for height. EXAMPLE: A flat shade with a 48" (122.0 cm) finished shade height will have 7 full panels and the 8th panel will be approximately 5 3 8" (13.7 cm) long. Flat Approximate Bottom Panel Height inches (cm) Number of Full Panels Looped Approximate Bottom Panel Height inches (cm) 58 (147.4) (6.4) (1.3) 59 (149.9) (8.9) (3.9) 60 (152.4) (11.5) (6.4) 61 (155.0) (14.0) (8.9) 62 (157.5) (1.3) (0.4) 63 (160.1) (3.9) (2.9) 64 (162.6) (6.4) (5.4) 65 (165.1) (8.9) (8.0) 66 (167.7) (11.5) (10.5) 67 (170.2) (14.0) (2.3) 68 (172.8) (1.3) (4.8) 69 (175.3) (3.9) (7.4) 70 (177.8) (6.4) (9.9) 71 (180.4) (8.9) (1.3) 72 (182.9) (11.5) (3.9) 73 (185.5) (14.0) (6.4) 74 (188.0) (1.3) (8.9) 75 (190.5) (3.9) (0.7) 76 (193.1) (6.4) (3.2) 77 (195.6) (8.9) (5.8) 78 (198.2) (11.5) (8.3) 79 (200.7) (14.0) (10.8) 80 (203.2) (1.3) (2.3) 81 (205.8) (3.9) (4.8) 82 (208.3) (6.4) (7.4) 83 (210.9) (8.9) (9.9) 84 (213.4) (11.5) (1.6) 85 (215.9) (14.0) (4.2) 86 (218.5) (1.3) (6.7) 87 (221.0) (3.9) (9.3) 88 (223.6) (6.4) (0.7) 89 (226.1) (8.9) (3.2) 90 (228.6) (11.5) (5.8) 91 (231.2) (14.0) (8.3) 92 (233.7) (1.3) (10.8) 93 (236.3) (3.9) 21 1 (2.6) 94 (238.8) (6.4) 21 2 (5.1) 95 (241.3) (8.9) 21 3 (7.7) 96 (243.9) (11.5) 21 4 (10.2) 18 graberdirect.com 6 February 2018
7 Options Virtual Cord Power Considerations Motors can be powered by batteries, plug-in transformer, or multi-motor power supply. Each shade requires a motor and appropriate power source. Power Considerations Larger shades consume more power while operating. When choosing the appropriate power source based upon the shade size we recommend the following power sources for the best performance. Cellular and Pleated Battery Consideration Shade Size square inches (cm 2 ) 0 to 3,600 (0 to 23,225.8) 3,600 to 7,200 (23,225.8 to 46,451.5) 7,200 (46,451.5) Recommended Power Source Batteries (single or dual), plug-in, or multi-motor power supply Dual battery cases, plug-in, or multi-motor power supply Plug-in or multi-motor power supply only Battery Case Ceiling/Inside Mount + Dual battery cases are recommended for larger shades (over 3,600 square inches (23,225.8 cm 2 )) to extend battery life. Transformer power is recommended for larger shades (over 7,200 square inches (46,451.5 cm 2 )) to provide the best experience with regular shade operation. Battery Case Considerations Battery power recommended for maximum of 10 shades for best battery performance. Battery cases are installed in space outside of the product and can be a challenge to hide in some windows. For Inside Mounts The cleanest and simplest method available for cellular and pleated shades is the integrated battery case hanger; this hanger attaches directly to a shade bracket to support the battery case while allowing the case to be removed for battery changes; additional recessed space will be needed For Outside Mounts For outside mounts, battery cases can be installed above or to the side of the shade NOTE: For best performance, use only AA lithium batteries. Battery case dimensions: 9 1 4" (23.5 cm) x 1 1 4" (3.2 cm) x 7 8" (2.3 cm) Dual battery cases installed end-to-end: require 21" (53.4 cm) of space (including connectors) Battery case minimum recessed space (installed with bracket): product minimum recessed space + 3 4" (2.0 cm) Outside Mount Inside Mount Dual Battery Cases Month Year Graber 15
8 Options Virtual Cord Power Considerations Solar/Roller, Natural Shades, Soft, Layered, and Sheer Shade Battery Considerations Soft/Natural Shades Battery Case Mounted Behind Soft/Natural Shades Battery Case Mounted on Headrail Solar Shades Outside Mount Battery Pack Solar Shades Inside Mount Battery Pack Solar, Layered, and Sheer Shades with Cassette Battery Pack Transformer power recommended for shade systems of any quantity. DC Plug-in Transformer Considerations A power outlet must be within cord length to power motor. Transformer includes 72" (182.9 cm) power cord and a 96" (243.9 cm) extension cable (power cord and extension cord cannot be cut to length or trimmed). A transformer is recommended on all shades over 7,200 square inches (46,451.5 cm 2 ). Transformer dimensions 4" (10.2 cm) wide x 2" (5.1 cm) deep (not including plug) x 1 1 2" (3.9 cm) tall (as you look at the plug in the outlet). NOTE: Due to the many variations of installations, wire management components are not included with your motorized shade system. There are numerous wire management products available at your local hardware store or home improvement center to help disguise the power cord when using a plug-in transformer. An example of a popular wire management accessory, is wire channel. Wire channel is a vinyl sheathing that can be placed along the window casing or wall that will house and conceal exposed wiring for a clean and professional appearance. Multi-Motor Power Supply Considerations Transformer enclosure is generally mounted in an accessible indoor location such as a basement, utility closet, or garage. Motors are home run wired to the panel using 16 gauge wire. 12 Volt: 10-motor power supply available for all Graber products and includes connectors. Dimensions: 12" (30.5 cm) wide x 6" (15.3 cm) deep x 12" (30.5 cm) high. CAUTION: A licensed electrician is required for all line voltage electrical connections. All local and NEC codes must be followed. DC Plug-In Transformer Multi-Motor Power Supply 16 graberdirect.com Month Year
9 Options Virtual Cord Power Components NOTE: These power supplies are not compatible with Somfy RTS motors. Battery Case Reloadable: available with or without batteries Multiple mounting options provided Simple case design allows for easy battery replacement Recommend shades greater than 3,600 square inches (23,225.8 cm 2 ) utilize two single battery cases (dual cases) to extend battery life Shades exceeding 7,200 square inches (46,451.5 cm 2 ) we recommend a plug-in transformer For best performance, use only AA lithium batteries (each case requires 8 AA lithium batteries) 48" (122.0 cm) and 96" (243.9 cm) extensions available, maximum of 2 per motor Battery power recommended for maximum of 10 shades for best battery performance Plug-In Transformer Eliminates the need for batteries Small plug profile Cord can be concealed behind curtains or along trim 72" (182.9 cm) power cord and 96" (243.9 cm) extension cable (power cord and extension cable cannot be cut to length) 48" (122.0 cm) and 96" (243.9 cm) extensions available, maximum of 2 per motor We recommend shades greater than 7,200 square inches (46,451.5 cm 2 ) utilize a transformer to eliminate changing batteries frequently Available in White only Transformer Dimensions 4" (10.2 cm) wide x 2" (5.1 cm) deep (not including plug) x 1 1 2" (3.8 cm) tall (as you look at the plug in the outlet) Wire management components are not included with your motorized shade system Refer to 12 volt power considerations for further details Multi-Motor Power Supply Used when direct wiring the motorized window coverings Each motor is home run wired back to the multi-motor power supply using 16 gauge 2 conductor wire (must be purchased locally; Graber does not supply) Power supply includes connectors Must be mounted indoors, NEMA rated Dimensions: 12" (30.5 cm) wide x 6" (15.3 cm) deep x 12" (30.5 cm) high 120 volt AC 3.3 amps 12 Volt Motors All Graber low voltage: up to 10 motors per power supply Month Year Graber 17
10 Radio Frequency (RF) Controls NOTE: These controls are not compatible with Somfy RTS motors. Options Virtual Cord The Virtual Cord is meant to control an individual shade (one to one). This helps assure simple, reliable control as well as simplifying the process of readjusting pre-set positions should it become necessary without removing power from adjacent shades. However, the Virtual Cord can be paired to multiple shades to provide group control. Not available for sheer or layered shades Includes convenient mounting hardware Battery included CR2430 Available in White Single-Channel Remote Used to control single shades or a group of shades simultaneously Set and use an intermediate position for your shades Includes convenient mounting hardware Battery included CR2430 Available in White Single-Channel Remote Decorator Wall Plate Kit (single-channel remote sold separately) Provides attractive mounting option to match look of existing light switches Locates the remote where most convenient for the user Helps prevent misplacing of remote when not in use Mounts flush to wall with included anchors, no cutting of drywall needed Available in White Multi-Channel Remote (12 channel) 12 channel remote, controls up to 24 shades Control single shades on each channel or group shade performing the same function Convenient display provides easy programming Set and use an intermediate position for your shades Includes mounting wall plate and hardware; mounts to wall with anchors (see multi-channel remote mounting options) Batteries included 2 AAA Available in White 18 graberdirect.com XX-XXXX-XX (XX/XX) XXXXXX S Month Year
11 230VAC 115VAC INPUT: VAC 3.3A VAC 2.0A 50/60Hz OUTPUT: BAUART GEPRUFT LISTED Rh rheinland TYPE Product APPROVED E A0 IND.CONT.EQ. 12V BAUART GEPRUFT Rh rheinland TYPE Product APPROVED E LEVELS 10A MW02 MADE IN CHINA 12VDC MULTI MOTOR POWER SUPPLY INSTRUCTIONS PRODUCT OVERVIEW 230VAC 115VAC DCOK +V +V -V -V LISTED E A0 IND.CONT.EQ. DR INPUT: VAC 3.3A VAC 2.0A 50/60Hz OUTPUT: 12V 10A E LEVELS MW02 MADE IN CHINA N L 12VDC MULTI MOTOR POWER SUPPLY 8-10 MOTORS CAUTION: A licensed electrician is required for all 120v electrical connections. 1. Install multi motor power supply enclosure using appropriate fasteners for chosen substrate (not included). Note: Common locations for mounting the enclosure include cabinets, utility closets, electrical area, basements and garages. CAUTION: Do not mount to ceiling with components facing down. May result in damage due to falling components. Figure 1 2. Home run low voltage wire from power supply location to each motor location using 16 gauge 2 strand wire (max distance 150 ft). +V +V -V -V DCOK Note: Each motor must have an individual run of wire. DR N L CAUTION: Do not staple or pinch wires as this can cause a short in the wire resulting in blown fuse. Figure 2 For product technical assistance, call (10/13) 11
12 12VDC MULTI MOTOR POWER SUPPLY INSTRUCTIONS 3. Connect wires to positive (+) and negative (-) at each motor port using a small screwdriver to firmly tighten. RS485 B RS485 A Each port is protected by fuse (4 amp). Figure 3 4E 4A. Strip 3 16" from each wire. 12.4mm 20.5mm 14.5mm From Motor + + From Power Supply Note: Some motor leads have preformed connectors that need to be removed. 4B. Push up levers on lever nut. 4C. Insert positive wires (from motor and power supply) into lever nut and push down on levers. Insert negative wires into next lever nut and push down levers. Figure 4 Note: Do not connect positive (+) and negative (-) wires within same lever nut. 4D. Confirm connections are secure. 4E. Integrated test port allows for insertions of volt meter prong for a convenient way to test voltage. For product technical assistance, call (10/13) 12
13 12VDC MULTI MOTOR POWER SUPPLY INSTRUCTIONS 5. Connect low voltage output from transformer to distribution panel using 16 gauge 2 conductor wire. DR DCOK +V +V -V -V +V +V -V -V Using a small Phillips screwdriver, attach positive ports and negative ports from the transformer to the main power input port on the distribution panel. 230VAC INPUT: VAC 3.3A VAC 2.0A 50/60Hz OUTPUT: 12V 10A 115VAC LISTED E A0 IND.CONT.EQ. Rh rheinland Product N BAUART GEPRUFT TYPE APPROVED L Transformer E LEVELS MW02 MADE IN CHINA 16 Guage, 2 Conductor Wire Distribution Panel Figure 5b RS485 B RS485 A + Main Power Input Port For product technical assistance, call (10/13) 13
14 LISTED E A0 IND.CONT.EQ. BAUART GEPRUFT Rh rheinland TYPE Product APPROVED E LEVELS 12VDC MULTI MOTOR POWER SUPPLY INSTRUCTIONS 6. Have electrician install 120vac power to the transformer. +V +V -V -V DR DCOK National Electrical Code (NEC ) and all local codes must be followed. 230VAC INPUT: VAC 3.3A VAC 2.0A 50/60Hz OUTPUT: 12V 10A 115VAC LISTED E A0 IND.CONT.EQ. Rh rheinland Product BAUART GEPRUFT TYPE APPROVED E LEVELS MW02 MADE IN CHINA N L N L + Figure 5a 7. Indicator lights will confirm power. See programming instructions for shade operation. +V +V -V -V DCOK DR VAC INPUT: VAC 3.3A VAC 2.0A 50/60Hz OUTPUT: 12V 10A 115VAC Indicator lights MW02 MADE IN CHINA N L Figure 5b For product technical assistance, call (10/13) 14
15 12VDC MULTI MOTOR POWER SUPPLY INSTRUCTIONS COMMON TROUBLESHOOTING 1. No lights are on the transformer unit? q Confirm power is connected. q Confirm breaker is on. 2. An individual light on the circuit board is not illuminated. q The fuse is not fully seated in the board. q The fuse is bad. 3. Where do I get replacement fuses/what type? q The fuses are 4 amp and can be purchased either through an automotive parts, hardware or home improvement center. q Confirm breaker is on. 4. Why do I keep blowing the fuse? q Power cable has a short in the wire. q The positive and negative wires are crossed. 5. The light is on the transformer but no lights are illuminated on the distribution panel? q Check connection between transformer and distribution panel to ensure proper port alignment. For product technical assistance, call (10/13) 15
16 12VDC MULTI MOTOR POWER SUPPLY INSTRUCTIONS 12 VOLT - MULTI MOTOR POWER SUPPLY MODEL Description The 12 volt Multi-Motor Power Supply is designed to power multiple motorized shades conveniently from a single power source. It has the ability to power up to 10 solar, roller, horizontal, soft horizontal or natural motorized shades or up to 8 cellular, pleated or roman motorized shades. Multi Motor Power Supply includes a hardwired transformer, power distribution panel housed in a NEMA 1 rated enclosure and lever nut wire connectors. Electrical Specifications Voltage Output: 12 VDC - 10 AMPS Voltage Input: 85 ~ 110 VAC Enclosure NEMA 1 Cabinet Dimensions L: 12, W: 12, D: 6 Weight ~ 10 pounds For product technical assistance, call (10/13) 16
17 17
18 MOTORIZED SHADES FEATURING Z-WAVE TECHNOLOGY 18
19 TABLE OF CONTENTS Getting to Know Your Remotes Two-Button Remote... 3 Single-Channel Remote... 4 Multi-Channel Remote... 5 Shade Program Button... 6 Quick Start Guide Getting Your Remote Ready... 7 Knowing Your Shade s Limits and Home Position... 8 Controlling Your Shade... 9 Assigning Shades to Channels (Multi-Channel Only) Adjusting Your Shade s Limits and Home Position Adjusting the Upper Limit Adjusting the Lower Limit Adjusting the Home Position Pairing Your Remotes and Shades Pairing Your Two-Button or Single-Channel Remote Pairing Your Multi-Channel Remote Integrating Your Shades with a Z-Wave Home Automation System Step 1: (Exclude) Remove the Current Pairing Between Your Shades and Remotes Step 2: (Include) Add Your Shades and Remotes to the Home Automation System Step 3: (Associate) Pair Remotes with Your Shades Troubleshooting Glossary About Z-Wave Channel Assignment Worksheet
20 GETTING TO KNOW YOUR REMOTES Two-Button Remote The two-button remote is usually used to control a single shade, but it can control up to 12 shades at once. UP button LED light DOWN button FRONT Battery compartment release * BACK Program button ** *Requires a screwdriver or similar tool to open. **Press with a paper clip or similar tool. 20 Getting to Know Your Remotes 3
21 Single-Channel Remote The single-channel remote can control up to 12 shades at once. UP button DOWN button HOME/STOP button LED light FRONT Program button * Battery screw access BACK *Press with a paper clip or similar tool. 4 Getting to Know Your Remotes 21
22 Multi-Channel Remote The multi-channel remote has 12 available channels. Each channel can include a single shade or multiple shades, maximum of 8 shades on one channel. The remote can control a maximum of 24 shades. UP button Display screen DOWN button LEFT button HOME/STOP button MENU/RIGHT button Also used to select menu options or return to channel selection FRONT LEARN HOW to assign shades to channels on page 10. Battery door BACK 22 Getting to Know Your Remotes 5
23 Shade Program Button The program button on the shade s headrail or motor end lets you move your shade without a remote. It s also used to perform various programming functions, discussed later in this manual. Program button MOTOR FOR CELLULAR, PLEATED, AND CLASSIC/FRESCO ROMAN SHADES Program button MOTOR FOR SOLAR, ROLLER, FABRIC/SOFT, AND NATURAL/ WOVEN WOOD SHADES 6 Getting to Know Your Remotes 23
24 QUICK START GUIDE Getting Your Remote Ready For the Two-Button or Single-Channel Remote Pull out the paper strip on the back of the remote. For the Multi-Channel Remote 1. Remove the battery door. 2. Insert 2 AAA batteries. 3. Replace the battery door. 24 Quick Start Guide 7
25 Knowing Your Shade s Limits and Home Position To help you get started quickly and easily, we set your shade up with predefined positions. Upper Limit: The highest position your shade can reach. We pick a position that gives you the best view and also protects your shade from damage. Lower Limit: The lowest position your shade can reach. This matches the shade length you ordered. Home Position: We set this to the midpoint of your shade, but you can adjust it to any point between the upper and lower limits. Not available with the two-button remote. You can adjust each of these positions to fit the needs of your home just follow the instructions in the Adjusting Your Shade s Limits and Home Position section on page Quick Start Guide 25
26 Controlling Your Shade We preprogrammed your remotes to operate your shades. Legend Press and hold Press and release Move up Move down Open Your Shade Completely Press and release the UP button. Close Your Shade Completely Press and release the DOWN button. Stop Your Shade While It s Moving While your shade is moving up, press and release the DOWN button or the HOME button. While your shade is moving down, press and release the UP button or the HOME button Adjust Your Shade Press and hold the UP button to move the shade up. Press and hold the DOWN button to move the shade down. Releasing the button will stop the shade Move Your Shade to the Home or Favorite Position Press and release the HOME button. Not available with the two-button remote. 26 Quick Start Guide 9
27 Assigning Shades to Channels (Multi-Channel Remote Only) If you bought your shades and multi-channel remote at the same time, your shades arrive already paired with your multi-channel remote. However, you ll need to assign each shade to a channel (or multiple channels) to control them. 1. Press and hold the MENU/RIGHT button for 2 seconds to enter the menu. 2. Select CHANNEL. 3. Select the channel you want to assign the shade to by scrolling left or right. 4. Select the shade you want to assign to the channel by scrolling up or down. 5. Press and hold the MENU/ RIGHT button for 2 seconds. The shade will jog and a checkmark will appear next to the shade number on the remote screen. 6. Repeat steps 3 5 for each shade. 10 Quick Start Guide 27
28 ADJUSTING YOUR SHADE S LIMITS AND HOME POSITION Use the instructions in this section to adjust your shade s upper and lower limits or home (favorite) position. NOTE If you don t press any buttons for 10 seconds while you re making these adjustments, the remote will time out. If that happens, just start the process over. 28 Adjusting Your Shade s Limits and Home Position 11
29 Adjusting the Upper Limit For the Two-Button or Single-Channel Remote Before You Start TARGET SHADE If your remote currently controls a group of shades, you ll first need to target the specific shade that you want to adjust the upper limit for. To do that, perform the following steps first: 1. On the remote, press and release the program button on the back. The remote LED will flash green. 2. On the shade you want to adjust, press and hold the program button for 3 seconds. The shade LED will flash green and the shade will jog. Even after you target a shade, all of the shades in the group will still move with the remote. However, nontargeted shades won t accept the new upper limit until you target them specifically. Don t attempt to move the upper limit to a position higher than the preset limit that could damage your shade or prematurely drain the batteries. 12 Adjusting Your Shade s Limits and Home Position 29
30 1. On the remote, press and release the UP button. Wait until the shade reaches its preset upper limit. 2. Press and hold the UP and DOWN buttons at the same time for 3 seconds. When the remote LED turns amber, release both buttons. The shade will jog. 3. Use the UP or DOWN buttons to move your shade to the new upper limit. 4. Press and hold the UP and DOWN buttons at the same time for 3 seconds. When the remote LED turns amber, release both buttons. The shade will jog. This means you ve set your new upper limit. 5. If you need to adjust another shade s upper limit, go back to the Before You Start section and repeat the steps for each shade. 30 Adjusting Your Shade s Limits and Home Position 13
31 For the Multi-Channel Remote 1. On the remote, press and hold the MENU/RIGHT button for 2 seconds to enter the menu. 2. Select SHADE > LIMITS. 3. To proceed past the warning message, press and hold the MENU/RIGHT button for 2 seconds. 4. Scroll left and right to select the shade you want to adjust the upper limit for. 5. With UPPER selected, press and hold the MENU/RIGHT button for 2 seconds. If the shade isn t already at the current upper limit, it will move to that position. If the shade is already at the current upper limit, it will jog. 6. Use the UP or DOWN buttons to move your shade to the new upper limit. 7. Press and release the MENU/ RIGHT button to set the upper limit. The shade will jog. This means you ve set your new upper limit. 14 Adjusting Your Shade s Limits and Home Position 31
32 Adjusting the Lower Limit For the Two-Button or Single-Channel Remote Before You Start TARGET SHADE If your remote currently controls a group of shades, you ll first need to target the specific shade that you want to adjust the lower limit for. To do that, perform the following steps: 1. On the remote, press and release the program button on the back. The remote LED will flash green. 2. On the shade you want to adjust, press and hold the program button for 3 seconds. The shade LED will flash green and the shade will jog. Even after you target a shade, all of the shades in the group will still move with the remote. However, nontargeted shades won t accept the new lower limit until you target them specifically. Don t attempt to move the lower limit to a position lower than the preset limit that could damage your shade. 32 Adjusting Your Shade s Limits and Home Position 15
33 1. On the remote, press and release the DOWN button. Wait until the shade reaches its preset lower limit. 2. Press and hold the UP and DOWN buttons at the same time for 3 seconds. When the remote LED turns amber, release both buttons. The shade will jog. 3. Use the UP or DOWN buttons to move your shade to the new lower limit. 4. Press and hold the UP and DOWN buttons at the same time for 3 seconds. When the remote LED turns amber, release both buttons. The shade will jog. This means you ve set your new lower limit. 5. If you need to adjust another shade s lower limit, go back to the Before You Start section and repeat the steps for each shade. 16 Adjusting Your Shade s Limits and Home Position 33
34 For the Multi-Channel Remote 1. On the remote, press and hold the MENU/RIGHT button for 2 seconds to enter the menu. 2. Select SHADE > LIMITS. 3. To proceed past the warning message, press and hold the MENU/RIGHT button for 2 seconds. 4. Scroll left and right to select the shade you want to adjust the lower limit for. 5. Scroll to LOWER, then press and hold the MENU/RIGHT button for 2 seconds. If the shade isn t already at the current lower limit, it will move to that position. If the shade is already at the current lower limit, it will jog. 6. Use the UP or DOWN buttons to move your shade to the new lower limit. 7. Press and release the MENU/ RIGHT button to set the lower limit. The shade will jog. This means you ve set your new lower limit. 34 Adjusting Your Shade s Limits and Home Position 17
35 Adjusting the Home Position Before you start, decide whether you want to adjust your shade s upper or lower limit. If you do, make those changes first moving those limits will reset your home position. Remember that the home position isn t available with the twobutton remote. For the Single-Channel Remote Before You Start TARGET SHADE If your remote currently controls a group of shades, you ll first need to target the specific shade that you want to adjust the home position for. To do that, perform the following steps: 1. On the remote, press and release the program button on the back. The remote LED will flash green. 2. On the shade you want to adjust, press and hold the program button for 3 seconds. The shade LED will flash green and the shade will jog. Even after you target a shade, all of the shades in the group will still move with the remote. However, nontargeted shades won t accept the new home position until you target them specifically. 18 Adjusting Your Shade s Limits and Home Position 35
36 1. On the remote, use the UP and DOWN buttons to move the shade to your desired home position. 2. Press and hold the HOME button for 3 seconds. When the remote LED turns amber, release the button. The shade will jog. This means you ve set your new home position on that shade. 3. If you need to adjust another shade s home position, go back to the Before You Start section and repeat the steps for each shade. Legend Press and hold Press and release Move up Move down 36 Adjusting Your Shade s Limits and Home Position 19
37 For the Multi-Channel Remote 1. Use the UP or DOWN buttons to move the shade to your new home position. This can be anywhere between the upper and lower limits. 2. Press and hold the MENU/RIGHT button for 2 seconds to enter the menu. 3. Select SHADE > SET HOME. 4. Select the shade you want to set the home position for by scrolling left or right. 5. Press and release the HOME button. The shade will jog. This means you ve set your new home position. Legend Press and hold Press and release Move up Move down 20 Adjusting Your Shade s Limits and Home Position 37
38 PAIRING YOUR REMOTES AND SHADES We preprogrammed your remotes to operate your shades. However, you might decide to adjust the pairing for example, you might lose a remote and need to pair a new one, or you might buy an additional remote after you buy your shades. This section shows you how to pair remotes and shades for a variety of control scenarios. To make the instructions easy to follow, steps for the multichannel remote are separated into their own section. NOTE If you don t press any buttons for 10 seconds while you re making these adjustments, the remote will time out. If that happens, just start the process over. 38 Pairing Your Remotes and Shades 21
39 Pairing Your Two-Button or Single-Channel Remote The two-button and single-channel remote behave almost identically. The only difference between these remotes is that the single-channel remote has a home button, while the two-button remote doesn t. In this section, we cover pairing instructions for either the twobutton or single-channel remote. So while the remote images shown might not match the remote you re using, the steps will still work for you. TWO-BUTTON SINGLE-CHANNEL Legend Press and hold Press and release Move up Move down 22 Pairing Your Remotes and Shades 39
40 Pair a Remote with a Shade You might need to do this if you bought a new remote or shade. These steps apply only to the new remote or shade. 1. Reset the new remote to make sure you start with a clean slate. a. Press and hold the program button on the back of the remote for 15 seconds. When the LED stops flashing, release the button. The remote LED should flash green, amber, and red before turning off. b. On the new shade, press and hold the program button for 7 seconds. When the shade jogs, release the button. 2. On the back of the new remote, quickly press and release the program button twice. The remote LED will flash amber and green. x2 3. On the new shade, press and hold the program button for 3 seconds. When the shade LED flashes green, release the button. The shade will jog once, and all LEDs will turn off. The shade is now paired with the remote. 40 Pairing Your Remotes and Shades 23
41 Pair a Remote with a Group of Shades If you want to control a group of shades with one remote, follow these steps. Before you start, decide which remote you want to control the group (known as the group remote). Note that you won t be able to control an individual shade with the group remote after you perform these steps. You can always adjust the remote s programming later. 1. Reset the group remote to make sure you start with a clean slate. a. Press and hold the program button on the back of the remote for 15 seconds. When the LED stops flashing, release the button. The remote LED should flash green, amber, and red before turning off. b. On the shade, press and hold the program button for 7 seconds. When the shade jogs, release the button. 2. Pair the group remote with the shade group. a. On the group remote, quickly press and release the program button on the back twice. The remote LED will flash amber and green. b. On one of the shades in the group, press and hold the program button for 3 seconds. When the LED flashes green, release the button. The shade will jog once, and the shade LED will turn off. The shade is now paired with the remote. c. Repeat steps a b for each shade in the group. x2 If you want to control each shade individually as well as in a group, follow the steps in the next section. 24 Pairing Your Remotes and Shades 41
42 Pair a Second Remote with a Shade If you paired a group of shades with a group remote in the previous section, you might still want to control each individual shade within that group with separate, individual remotes. For example, you might want to control shades as a group with a single-channel remote, but still be able to control each shade individually with separate twobutton remotes. To do that, follow these steps. 1. On the group remote, quickly press and release the program button on the back twice. The remote LED will flash amber and green. x2 2. On the individual remote, press and hold the program button on the back for 3 seconds. When the LED flashes green, release the button. The LEDs on both remotes will turn solid green and then turn off. 3. On the individual remote, press and release the program button on the back. The remote LED will flash green. 4. On the shade you want to pair the individual remote with, press and hold the program button for 3 seconds. When the shade LED flashes green, release the button. The LED on the individual remote will turn green, and the shade will jog. Both of your remotes will now control the shade. 5. Repeat steps 1 4 for each shade you want to control with an individual remote. 42 Pairing Your Remotes and Shades 25
43 Pairing Your Multi-Channel Remote Pair a Remote with a Shade You might need to do this if you bought a new shade after your initial purchase. 1. Press and hold the MENU/RIGHT button for 2 seconds to enter the menu. x2 2. Select ZWAVE > INCLUDE. 3. On the shade you want to pair, press and hold the program button for 3 seconds. When the shade LED flashes green, release the button. The remote s screen will indicate that the shade is now paired with the remote. 4. Repeat steps 2 4 for each shade you want to pair. 5. Assign the shade to a channel by following the steps on page Pairing Your Remotes and Shades 43
44 Pair a Remote with a Group of Shades Already Controlled by a Group Remote If you bought a new multi-channel remote and want to pair it with a group of shades that are already controlled by a group remote, follow these steps. 1. On the group remote, quickly press and release the program button on the back twice. The remote LED will flash amber and green. x2 2. On the multi-channel remote, press and hold the MENU/RIGHT button for 2 seconds. 3. Select ZWAVE > LEARN. The group remote LED will flash green and then turn off. The multi-channel remote will show JOINING on the screen. 4. Select SHADE > FIND > BEGIN. The multi-channel remote will show FOUND SHADES. 5. Assign the shades to channels by following the steps on page 10. Legend Press and hold Press and release Move up Move down 44 Pairing Your Remotes and Shades 27
45 Pair a Second Remote with a Shade That s Already Controlled by a Multi-Channel Remote If you paired a group of shades with a multi-channel remote in the previous section, you might still want to control each individual shade within that group with separate, individual remotes. To do that, follow these steps. 1. On the multi-channel remote, press and hold the MENU/RIGHT button for 2 seconds. 2. Select ZWAVE > INCLUDE. 3. On the individual remote, press and hold the program button for 3 seconds. When the remote LED flashes green, release the button. 4. On the individual remote, press and release the program button on the back. The remote LED will flash green. 5. On the shade you want to pair the individual remote with, press and hold the program button for 3 seconds. When the shade LED flashes green, release the button. The LED on the individual remote will turn green, and the shade will jog once. Both of your remotes will now control the shade. 6. Repeat steps 1 5 for each shade you want to control with an individual remote. 28 Pairing Your Remotes and Shades 45
46 Remove a Shade from the Multi-Channel Remote You might need to do this if your shade needs to be sent in for repairs. 1. On the remote, press and hold the MENU/RIGHT button for 2 seconds to enter the menu. 2. Select ZWAVE > EXCLUDE. 3. On the shade, press and hold the program button for 3 seconds. When the shade LED flashes green, release the button. The remote s screen will indicate that the shade has been removed from the remote. The shade will jog. Clear All Channels If you want to clear all your current channel assignments and start over with assigning shades to channels, follow these steps. 1. On the remote, press and hold the MENU/RIGHT button for 2 seconds to enter the menu. 2. Select SHADE > CLR CHNLS > CONFIRM. At this point, the shade menu is cleared. This means you can t select a shade from the remote or assign shades to a channel until you find them again. 3. Select FIND ALL > BEGIN. The screen will display SEARCHING (this might take a little while), and then display how many shades have been found. Your shades are now visible in the remote again. To create new channel assignments, follow the steps on page Pairing Your Remotes and Shades 29
47 INTEGRATING YOUR SHADES WITH A Z-WAVE HOME AUTOMATION SYSTEM Your shades and remotes operate using Z-Wave radio technology, which allows you to control your shades with many popular home automation systems. To integrate your shades with a home automation system, you ll perform three tasks: 1. Exclude: Remove the current pairing between your shades and remotes. 2. Include: Add your shades and remotes to the home automation system. 3. Associate: Pair remotes with your shades. The following sections walk you through each task. NOTE If you don t press any buttons for 10 seconds while you re performing these steps, the remote will time out. If that happens, just start the process over. 30 Integrating Your Shades with a Z-Wave Home Automation 47 System
48 Step 1: (Exclude) Remove the Current Pairing Between Your Shades and Remotes 1. Reset each two-button or single-channel remote, if you have them. a. Press and hold the program button on the back of the remote for 15 seconds until the remote LED stops flashing. The remote LED should flash green, amber, and red before turning off. 2. Reset your multi-channel remote, if you have one. a. Press and hold the MENU/ RIGHT button for 2 seconds to enter the menu. b. Select ZWAVE > RESET. c. With LIKE NEW? selected, press and hold the MENU/ RIGHT button until the screen no longer tells you to wait. 3. On each shade, press and hold the program button for 7 seconds. When the shade jogs, release the button. All remotes are now removed from the shades. However, the shades upper, lower, and home positions are still set. Integrating 48 Your Shades with a Z-Wave Home Automation System 31
49 Step 2: (Include) Add Your Shades and Remotes to the Home Automation System NOTE You need to add the shades first and then the remotes to your home automation system. Add Your Shades 1. From your home automation system s user interface, select the option to enroll a new Z-Wave device. See your home automation system s instructions for details. 2. On one of your shades, press and hold the program button for 3 seconds. When the shade LED flashes green, release the button. The shade should appear as a found Z-Wave device in your home automation system s user interface. 3. Repeat steps 1 2 for each shade. Add Your Two-Button or Single-Channel Remotes 1. From your home automation system s user interface, select the option to enroll a new Z-Wave device. See your home automation system s instructions for details. 2. On one of your remotes, press and hold the program button on the back for 3 seconds. When the remote LED flashes green, release the button. The remote should appear as a found Z-Wave device in your home automation system s user interface. 3. Repeat steps 1 2 for each remote. 32 Integrating Your Shades with a Z-Wave Home Automation 49 System
Graber Virtual Cord Cellular Shades Specification. Graber Virtual Cord Cellular Shades Specification
Graber Virtual Cord Cellular Shades Specification Features Graber Virtual Cord Cellular Shades Specification Motorized Blind and Shade Features Refer to individual price list for specific option and size
More informationGraber Virtual Cord Mezzanine Layered Shades Specification
Features Graber Virtual Cord Mezzanine Layered Shades Specification Motorized Blind and Shade Features Refer to individual price list for specific option and size information for the product being ordered.
More informationWhisperTrac 3000 installation guide
WhisperTrac 3000 installation guide Table of contents WhisperTrac Installation Guide Elements of the WhisperTrac system.................................................... 3 Section 1: Mounting Mounting
More informationMeasuring for BLINDS AND SHADES
Measuring for BLINDS AND SHADES FOR BLINDS AND SHADES Our measuring guide will take you through the steps you need to measure your windows. Just a few simple measurements are all you ll need and if you
More informationMOBILE CONNECTOR - GEN 2 OWNER'S MANUAL
MOBILE CONNECTOR - GEN 2 OWNER'S MANUAL UNITED STATES Contents Safety Information... 2 Save These Important Safety Instructions... 2 Warnings...2 Cautions...3 General Information... 4 Mobile Connector
More informationWireless Wall Switch Guide
Wireless Wall Switch Guide Battery-Powered Window Coverings Control Like Never Before This guide shows you how to set up and operate Battery-Powered motorized products using the wireless wall switch. The
More informationPLATINUM TECHNOLOGY. Wireless Wall Switch. Guide. for PowerRise 2.0, PowerGlide 2.0 and PowerTilt
PLATINUM TECHNOLOGY Wireless Wall Switch Guide for PowerRise 2.0, PowerGlide 2.0 and PowerTilt Control Like Never Before This guide shows you how to set up and operate Hunter Douglas motorized products
More informationTRC-190 User s Manual
First Edition, November 2008 www.moxa.com/product 2008 Moxa Inc. All rights reserved. Reproduction without permission is prohibited. The software described in this manual is furnished under a license agreement
More informationRemote Control Electrical Roller Blinds
Remote Control Electrical Roller Blinds Instruction Manual for Model HT200 Contents 1. Description of Remote Control Electrical Roller Blind General Information Technical Data 2. Parts List Model HT200
More informationMade to Measure Window Furnishings
Made to Measure Window Furnishings Innovative Solutions to Add Value for your Customer Sales Product Training Module 10.5 - Cellular Blinds Revision C Sales Product Training Contents for Module 10.5 -
More informationCellular Shades MOTORIZED SKYLIGHT. Simplicity with rechargeable batteries. Installation & Care Instructions
Cellular Shades MOTORIZED SKYLIGHT Simplicity with rechargeable batteries Installation & Care Instructions 152741B 7/2/2018 GETTING STARTED A few simple tools are required: - Measuring tape - Power drill,
More informationPRODUCT INFORMATION MANUAL SECTION: 7E POWERRISE PLATINUM TECHNOLOGY POWERRISE PLATINUM TECHNOLOGY WIRELESS WALL SWITCH GUIDE
POWERRISE PLATINUM TECHNOLOGY WIRELESS WALL SWITCH GUIDE Control Like Never Before Control Like Never Before This guide shows you how to set up and operate LUXAFLEX Window Fashions products using the
More informationThanks for shopping with Improvements! Lighted Canterbury Christmas Greenery Doorway Arch Item #548443
Thanks for shopping with Improvements! Lighted Canterbury Christmas Greenery Doorway Arch Item #548443 IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. PARTS LIST: 2 Metal Plate Stands 5 Greenery
More informationDLA. DMX512 Analyzer. DLA Users Manual SV2_00 B.lwp copyright ELM Video Technology, Inc.
DLA DMX512 Analyzer DLA DLA-HH 1 Table Of Contents IMPORTANT SAFEGUARDS... 2 DLA OVERVIEW... 3 CONNECTION... 3 OPERATION... 3 HARDWARE SETUP... 4 DLA-HH (PORTABLE) LAYOUT... 4 CHASSIS LAYOUT... 4 DLA MENU
More informationBattery Powered Motorized Window Shadings. Remote Control. Guide
Battery Powered Motorized Window Shadings Remote Control Guide Control Like Never Before This guide shows you how to set up and operate Battery Powered motorized window shadings using the remote control.
More informationATMOX Power Supply ATMOX AC Adapter with Plugs. Wiring Guide
ATMOX Power Supply ATMOX AC Adapter with Plugs Wiring Guide Product Overview This Guide will cover the wiring and installation of an ATMOX Power Supply or AC Adapter. For instructions on specific fans
More informationModel 7416LED
INSTALLATION INSTRUCTIONS FOR Model 7416LED www.sportablescoreboards.com 1 Table of Contents DESCRIPTION... 3 THE SCOREBOARD SYSTEM SHOULD INCLUDE THE FOLLOWING PARTS:... 3 INSTRUCTIONS FOR REPORTING SHIPPING
More informationBasketball Shot Clock Set LX2180 Manual
Basketball Shot Clock Set LX2180 Manual 72 Industrial Boulevard Wrightsville, GA 31096 Phone: (800) 445-7843 Fax: (800) 864-0212 www.electro-mech.com LX2180 Revision 5 February 8, 2013 Table of Contents
More informationInstallation, Operation, and Service Manual SIEMENS HEALTHCARE INTEGRATED ELECTRICAL CABINET
Technical Publications SIEMENS HEALTHCARE INTEGRATED ELECTRICAL CABINET for ARTIS Q / Q.ZEN / ONE ARTIS ZEEGO / ZEEGO.ZEN ARTIS ZEE MULTIPURPOSE SINGLE PLANE IECAX480V125A Main Disconnect Panel Bevco Engineering
More informationInstallation Instructions Access Dual Roller FlexShade System by Draper
Installation Instructions Access Dual Roller FlexShade System by Draper Caution 1 The Access Dual Roller FlexShade headbox is shipped in one carton; the shades and/or screen are shipped in a separate carton;
More informationTRC-190 User s Manual
User s Manual Edition 3.2, May 2017 www.moxa.com/product 2017 Moxa Inc. All rights reserved. User s Manual The software described in this manual is furnished under a license agreement and may be used only
More informationPLATINUM TECHNOLOGY. Wireless Wall Switch. Guide. for PowerRise 2.0, PowerGlide 2.0 and PowerTilt
PLATINUM TECHNOLOGY Wireless Wall Switch Guide for PowerRise 2.0, PowerGlide 2.0 and PowerTilt Control Like Never Before This guide shows you how to set up and operate Hunter Douglas motorized products
More informationThe power behind competitiveness. Delta Infrasuite Power Management. Power Distribution Unit. User Manual.
The power behind competitiveness Delta Infrasuite Power Management Power Distribution Unit User Manual www.deltapowersolutions.com Save This Manual This manual contains important instructions and warnings
More informationInstallation Instructions
Please read all instructions before installing SPECIFICATIONS RT-100 Time Switch Programmable Countdown Voltage...120VAC, 60HZ Load (Single Pole Circuit) Incandescent or fluorescent lamp... 0 600 Watt
More informationInstallation Instructions
Please read all instructions before installing RS-350 PIR Dual Relay Universal Application Wall Switch Vacancy Sensor with Manual ON/OFF Lens Lighted Switch ON/OFF button for Relay 1 ON/OFF button for
More informationXkitz.com. 8 Channel Capacitive Touch Switch Model XCTS-8M. Operators Manual. Invisible Touch Switch:
8 Channel Capacitive Touch Switch Model XCTS-8M Operators Manual Xkitz.com Invisible Touch Switch: The XCTS-8M allows you to install up to 8 capacitive touch switches nearly anywhere. It detects any sudden
More informationInstruction / Installation Sheet DataComm Electronics WH Recessed Pro-Power Kit with Duplex Receptacle and Straight Blade Inlet
Instruction / Installation Sheet DataComm Electronics 45-0024-WH Recessed Pro-Power Kit with Duplex Receptacle and Straight Blade Inlet DataComm Electronics, Inc. 6349 Peachtree Street Norcross, GA 30071-1725
More informationPLATINUM TECHNOLOGY. Wireless Wall Switch. Guide. for PowerRise, PowerGlide and PowerTilt Systems
PLATINUM TECHNOLOGY Wireless Wall Switch Guide for PowerRise, PowerGlide and PowerTilt Systems Control Like Never Before Getting Started This guide shows you how to set up and operate Hunter Douglas motorized
More informationCAUTION READ CAREFULLY
Docking Drawer Install Manual for DD 21 + 24 Slim Applicable Models: 0290-00030, 0290-00030W, 0290 00031, 0290 00031W 0230-00004. r5 10/21/2015 CAUTION READ CAREFULLY Failure to follow these instructions
More informationVRp Three-Phase Precision AC Voltage Regulator
VRp-22500-0338 Three-Phase Precision AC Voltage Regulator INSTALLATION INSTRUCTIONS Inspection and Unpacking Please inspect the wooden crate for obvious shipping damage. Some crates contain up to six (6)
More informationModel HM-535 Power Supply Installation and Service Instructions
Model HM-535 Power Supply Installation and Service Instructions 430-535 0104 2004 Heritage MedCall, Inc SENTRY INSTALLATION & SERVICE INSTRUCTIONS POWER SUPPLY UNIT Model HM-535 IMPORTANT SAFETY INSTRUCTIONS
More informationA0/A1 Controller Assembly Operation/Installation Manual READ AND FOLLOW ALL SAFETY INSTRUCTIONS
Document Number: 9100-127-2301-99 Release Date: 2/2/15 A0/A1 Controller Assembly Operation/Installation Manual READ AND FOLLOW ALL SAFETY INSTRUCTIONS DO NOT let any supply cords touch hot surfaces higher
More informationAPES-14 HD-6500 & HD-7000 Version Operator s Training Manual
APES-14 HD-6500 & HD-7000 Version Operator s Training Manual Issue A1 09/03 PDI Part # 900600 Performance Design Inc. 2350 East Braniff St. Boise Idaho 83716 This manual contains very important safety
More informationM215-Z Safety Information (M LL-IG-ZC)
M215-Z SAFETY M215-Z Safety Information (M215-60-2LL-IG-ZC) This document contains important instructions to use during installation of the M215-Z Zep Compatible Microinverters. To reduce the risk of electrical
More informationNT-2300 Series Dual Circuit Track System & Accessories
ILLUMINATING THE FUTURE...SINCE 1989 NT-2300 Series Dual Circuit Track System & Accessories Type Project Catalog No. Lamp/Wattage PRODUCT DESCRIPTION Low profile, extruded aluminum track with 20-Amp rated
More informationControl Your World. Lighting Control System
Lighting Control System Control Your World Today s homes have a wide variety of lights, dimmers and switches, indoors and out. Lighting control provides convenience, cost savings and an extra measure of
More informationUser's Guide. MiniTec TM Series Model MN25 MultiMeter
User's Guide MiniTec TM Series Model MN25 MultiMeter Warranty EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and workmanship for one year from date of shipment (a
More informationPRODUCT INFORMATION MANUAL SECTION: 7E POWERRISE PLATINUM TECHNOLOGY POWERRISE PLATINUM TECHNOLOGY WIRELESS WALL SWITCH GUIDE
POWERRISE PLATINUM TECHNOLOGY WIRELESS WALL SWITCH GUIDE Control Like Never Before Control Like Never Before This guide shows you how to set up and operate LUXAFLEX Window Fashions products using the
More informationPreparing for a Docking Drawer Slim Installation To prepare for a successful Docking Drawer Slim installation please ensure that the cable management
Docking Drawer Install Manual Docking Drawer Slim Series Applicable Models: 0290 00031(W) / 24 0290-00030(W) / 21 0290-00047(W) / 18 0230-00004. r6 1/19/2016 CAUTION READ CAREFULLY Failure to follow these
More informationAE21 SERIES DISPLAY CONTROL TERMINAL
FN:AE21MAN1.DOC AE21 SERIES DISPLAY CONTROL TERMINAL DESCRIPTION The AE21 Series Display Control Terminal is used for implementing various display functions. It consists of a control terminal, the AE21,
More informationInstallation/Operating Instructions 220V VCB Silhouette/Series E Electric Video Conferencing Background by Draper
Installation/Operating Instructions 220V VCB Silhouette/Series E Electric Video Conferencing Background by Draper Caution 1 Read instructions through completely before proceeding; keep them for future
More informationMULTI-CODE. Installation Instructions for Model Wireless Programmable Digital Keyless Entry System
MULTI-CODE Installation Instructions for Model 4200 Wireless Programmable Digital Keyless Entry System Congratulations! You have purchased the MULTI-CODE Wireless Programmable Digital Keyless Entry System,
More informationThe Power of Platinum
The Power of Platinum LUXAFLEX Window Fashions with PowerRise Platinum Technology LUXAFLEX WINDOW FASHIONS The Next Generation in LUXAFLEX Window Fashions with PowerRise Operating System The convenience
More informationHP UPS R/T3000 G2. Overview. Precautions. Kit contents. Installation Instructions
HP UPS R/T3000 G2 Installation Instructions Overview The HP UPS R/T3000 G2 features a 2U rack-mount with convertible tower design and offers power protection for loads up to a maximum of 3300 VA/3000 W
More informationInstallation Manual. Alpha 4000 RGB Signs. Before you begin
Installation Manual Alpha 4000 RGB Signs signs are indoor, two-line, full matrix LED displays. These signs can display both text and graphics and can be networked together. Before you begin 1. This manual
More informationft Aspen Fir Item # Commercial ITEM Lights
7.57.5 ft Aspen Fir Item #142027 Commercial ITEM Lights PARTS LIST A. BOTTOM B. LOWER MIDDLE C. UPPER MIDDLE D. TOP E. TREE STAND NUMBER OF PERSONS RECOMMENDED FOR ASSEMBLY: 2 SKU 142027 7.5 ASPEN FIR
More informationLutron Roller 100. Lutron Sivoia QS Roller 100 Chassis Specification
086106b 1 05.11.17 Lutron Roller 100 The Sivoia QS roller 100 shade utilizes the ultra-quiet, precision controlled Electronic Drive Unit (EDU). The Sivoia QS EDU is housed inside the roller shade assembly
More informationOWNER S MANUAL GEQ 131/ 131LF GEQ 215/ 215LF GEQ 231. Single Channel 31 Band Graphic Equalizer. 2 Channel 15 Band Graphic Equalizer
20 25 31.5 40 50 63 80 0 125 160 200 250 315 400 500 630 800 1K 1.25K 1.6K 2K 2.5K 3.15K 4K 5K 6.3K 8K K 12.5K 16K 20K +12 +6 +3 0-3 GEQ 131LF 5 31 BAND GRAPHIC EQUALIZER 15 40 60 7K 15K 22K BYPASS RANGE
More informationSERIES 4600 Ethernet Visual-Pager Display INSTALLATION and SPECIFICATION GUIDE. Manual No. D Revision Date: 08/2016 Control: 1.
SERIES 4600 Ethernet Visual-Pager Display INSTALLATION and SPECIFICATION GUIDE Manual No. D4600-7010 Revision Date: 08/2016 Control: 1.0 Microframe Corporation 604 South 12th Street Local: 918-258-4839
More informationAutoRanging Digital MultiMeter
Owner's Manual AutoRanging Digital MultiMeter Model No. 82175 CAUTION: Read, understand and follow Safety Rules and Operating Instructions in this manual before using this product. Safety Operation Maintenance
More informationInView Marquee Message Display
Installation Instructions InView Marquee Message Display Introduction These instructions show how to change the serial address and how to mount InView series signs with NEMA Types 4, 4X, and 12 enclosures.
More informationTECHKNOW, INC. Kiosk Order Confirmation System INSTALLATION MANUAL. Revision Date: July 11, 2012 Part # Version 3.2
document Page 1 of 18 TECHKNOW, INC Kiosk Order Confirmation System INSTALLATION MANUAL Revision Date: July 11, 2012 Part # Version 3.2 Techknow, Inc. 393 Mayfield Road Duncan, SC 29334 www.gotechknow.com
More informationResidential/Light Commercial Remote Control System
MODULAR CONTROLLER REMOTE CONTROL Residential/Light Commercial Remote Control System OWNER S MANUAL AND INSTALLATION INSTRUCTIONS CONTENTS INTRODUCTION 2 SYSTEM COMPONENTS - REMOTE 3 SYSTEM COMPONENTS
More informationInstallation and Maintenance
CHAPTER 4 Installation and Maintenance Revised: April 19, 2010, Introduction This chapter explains how to install a SCE 1000 platform in a rack or in a general tabletop or workbench installation. Additionally,
More informationControl Box Setup - PRSalpha
888-680-4466 ShopBotTools.com Control Box Setup - PRSalpha Copyright 2016 ShopBot Tools, Inc. page 1 Copyright 2016 ShopBot Tools, Inc. page 2 Parts List: Hooking Up a PRSalpha Gantry Tool Powering the
More informationPV Rapid Shutdown device
PV Rapid Shutdown device Installation and Operation Manual Solis-RSD-1G(1:1) Solis-RSD-1G(2:2) Manufacturer: Ginlong (Ningbo) Technologies Co.,Ltd., Ningbo, Zhejiang, P.R.China US Office: 565 Metro Pl.
More informationMODEL 3312 LED
INSTALLATION INSTRUCTIONS FOR MODEL 3312 LED www.sportablescoreboards.com 1 Table of Contents DISCRIPTION... 3 THE SCOREBOARD SYSTEM SHOULD INCLUDE THE FOLLOWING PARTS:... 3 INSTRUCTIONS FOR REPORTING
More informationWindow Shadings RemoteLift. Remote Control. Guide
Window Shadings RemoteLift Remote Control Guide Control Like Never Before This guide shows you how to set up and operate motorized window shadings using the RemoteLift remote control. In this guide, you
More informationBefore you get started
Installation Guide Before you get started If you ve installed light switches before and are comfortable with high voltage wiring, installing a Noon switch is easy. If not, we highly recommend hiring a
More informationC-POWER AC AUTOMATIC CONTROL
Issue 1 Print 1 C-POWER AC AUTOMATIC CONTROL INSTALLATION INSTRUCTIONS & OWNER S MANUAL Model: 93 ACMC100I A Charles Industries, Ltd. All rights reserved. Printed in the United States of America. Issue
More informationSapling Converter Box
Installation Manual Sapling Converter Box SCB-100-000-1 Version Number 1.2 Current as of March 15, 2015 The Sapling Company, Inc. (+1) 215.322.6063 P. (+1) 215.322.8498 F. 2-Wire Converter Box (SCB-100-000-1)
More informationDECOFLEX WIREFREE RTS SWITCH
SOMFY INSTRUCTIONS DECOFLEX WIREFREE RTS SWITCH Part # S 1810897 DecoFlex 1 (white) 1810898 DecoFlex 1 (ivory) 1810899 DecoFlex 1 (black) 1810813 DecoFlex 5 (white) 1810814 DecoFlex 5 (ivory) 1810830 DecoFlex
More informationSERIES 5100XXX8 INSTALLATION & SPECIFICATION GUIDE
SERIES 5100XXX8 INSTALLATION & SPECIFICATION GUIDE Microframe Corporation 604 South 12th Street Local: 918-258-4839 Toll Free: Website: www.microframecorp.com E-mail: support@microframecorp.com Revision
More informationModel LX8850 Product Guide
Model LX8850 Product Guide Indoor Hockey Scoreboard 72 Industrial Boulevard Wrightsville, GA 31021 Phone:(800) 445-7843 Fax:(800) 864-2012 www.electro-mech.com LX8850 Revision 7 February 27, 2013 Table
More informationInstallation Instructions
Specifications PW-301/PW-301-347 PW-302/PW-302-347 Passive Infrared Multi-Way Wall Switch Occupancy Sensor PW-301 PW-301-347 PW-302 PW-302-347 Voltages: PW-301 & PW-302................ 120/277VAC, 50/60Hz
More informationModel No. ET-JPF200BE
Operating Instructions Floor Stand Kit Commercial Use Model No. ET-JPF200BE ET-JPF200WE ENGLISH FRANÇAIS ESPAÑOL DEUTSCH ITALIANO * The above illustration is of this product mounted to an optional projector.
More informationLED Maintenance Instructions
Chapter 5 LED Maintenance Instructions This guide describes the maintenance procedures for the LED portion of your DayStar or TekStar sign. 1.800.237.3928 stewartsigns.com Rev1802 Intentionally Left Blank
More informationComputer Temperature Interface model CTI-2. Description. Installation. Control Module
Description The Sine Systems model CTI-2 Computer-Temperature Interface allows a computer to monitor the outside air temperature. It consists of a 2.75 x 3 x 0.75 control module with 8 screw-terminal connections.
More informationSIEMENS HEALTHCARE INTEGRATED ELECTRICAL CABINET
Product Data Sheet Technical Publications SIEMENS HEALTHCARE INTEGRATED ELECTRICAL CABINET for ARTIS Q / Q.ZEN / ZEE BIPLANE IECAX480V225A Main Disconnect Panel Bevco Engineering Company, Inc. CONFIDENTIAL
More informationDM-918 OPERATIONS MANUAL AUTORANGING MULTIMETER
DM-918 OPERATIONS MANUAL AUTORANGING MULTIMETER SAFETY INFORMATION The following safety information must be observed to ensure maximum personal safety during the operation of this meter: This meter is
More informationMODEL 9266 LITTLE LEAGUE BASEBALL SCOREBOARD. Instruction Manual
UNITEC MANUFACTURING DIVISION MODEL 9266 LITTLE LEAGUE BASEBALL SCOREBOARD (WITH INNING BY INNING SCORING & PITCH COUNT) Instruction Manual Mailing Address: PO Box 260, Yorkville, NY 13495-0260 Plant Address:
More informationRhino Buffer Module PSM24-BFM600S. Operating Instructions
Rhino Buffer Module PSM24-BFM600S Operating Instructions RHINO BUFFER MODULE PSM24-BFM600S Description The PSM24-BFM600S Buffer Module will hold the output voltage of a 24 VDC power supply after brownouts
More informationInstallation Operation
Installation Operation Luminette PowerGlide 2.0 with Platinum Technology Hard-Wired Motorization CONTENTS Getting Started: Install And Test The Headrail... 1 Understand The Connection Interface... 1 Lay
More informationC5C Cross-Connect System
C5C Cross-Connect System I N S T A L L A T I O N I N S T R U C T I O N High-Density Connection Blocks 1.0 General Product Information The C5C cross-connect system is comprised of a high-density connection
More informationJunos WebApp Secure 5.0 Hardware Guide
Junos WebApp Secure 5.0 Hardware Guide Junos WebApp Secure 5.0 Hardware Guide This document contains a specification for the MWS1000 hardware appliance, as well as instructions for installation into a
More informationPower Supply (48Vdc, 2.5A)
Telecommunications Group Section 855-180-201 Equipment Issue 1 Fourth Printing, September 2006 8551-80 Power Supply (48Vdc, 2.5A) Compliant with UL Standard 60950, Second Edition* CONTENTS PAGE Part 1.
More informationHolland Computers, Inc. Crane Kit Manual Part Number RA-CRANE-KIT
Holland Computers, Inc. Crane Kit Manual Part Number RA-CRANE-KIT SECTION 1 - Introduction Description This kit has been manufactured as a replacement gantry and electronics for existing machines using
More informationM215 Safety (M LL-S22-IG / S23-IG / S24-IG)
M215 SAFETY M215 Safety (M215-60-2LL-S22-IG / S23-IG / S24-IG) Important Safety Information This document contains important instructions to use during installation of the Enphase M215 Microinverter. To
More information*520886* IntelliTouch Pool & Spa Control System MobileTouch Wireless Controller. User s and Installation Guide. P/N Rev A
pool/spa control system IntelliTouch Pool & Spa Control System MobileTouch Wireless Controller User s and Installation Guide P/N 520886 - Rev A *520886* i MobileTouch Wireless Controller kit contents The
More informationPro-Star AVW200 Installation and Operation Manual Protel, Inc. ALL RIGHTS RESERVED AVW200HM01.1
Pro-Star AVW200 Installation and Operation Manual 2005 Protel, Inc. ALL RIGHTS RESERVED AVW200 Installation and Operation Manual Revision History Revision Date Description of Changes AVW200HM01.0 12/05
More informationModel LX2370 Product Guide
Model LX2370 Product Guide Indoor Basketball Scoreboard 72 Industrial Boulevard Wrightsville, GA 302 Phone:(800) 445-7843 Fax:(800) 864-202 www.electro-mech.com Table of Contents Scoreboard Specifications...3
More information12V DC ROLLER SHADE User Manual
12V DC ROLLER SHADE User Manual English Revision 8.1 November 27th, 2017 INTRODUCTION Thank you for your purchase. The following user manual will walk you through the setup of your Link Shades device.
More informationA note about our online installation instructions:
A note about our online installation instructions: Most Modern Fan Co. products have been in our assortment for several years or longer. As we continually work to improve product performance and user experience,
More informationIntelligent Channel Bank Shelf
Telecommunications Group Section 360-080-204 Equipment Issue 4 Third Printing, August 2006 360-80 Intelligent Channel Bank Shelf CONTENTS PAGE Part 1. GENERAL.............................................................................
More informationSite Preparation CHAPTER
CHAPTER 3 Site Preparation This chapter describes the steps to take and the considerations you should keep in mind prior to installing the modules in an open rack. It also contains information that applies
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS 19 20 21 01 07 22 23 13 10 12 08 17 18 11 02 14 15 04 03 16 WELCOME PARTS LIST Thank you for purchasing this HealthPoint Technology Cabinet from Humanscale! Before you begin installing
More informationmws-sn monorail wall standoff (8) MWS-SN Monorail Wall Standoff Order seperate from Kit: (4) MW-REW-SN Rebel Fixture for Monorail Wall
Monorail WALL - MW -sc- straight conductive connectors s- monorail wall standoff LAMPS Accenting Art Work (4) 50 watt 26 MR16 rebel WAlL Total of 200 watts consumed. Over 300 watts use 600 watt transformer.
More informationSight and Sound Assurance Monitor
08037_inst_video_072203 7/29/03 11:26 AM Page 1 Sight and Sound Assurance Monitor with Extra Receiver User Guide Questions? Comments? Missing Parts? Contact Us: www.safety1st.com French Guide: page 14
More informationOmnitron Systems Technology, Inc. 1. iconverter. 19-Module Managed Power Chassis User s Manual
Omnitron Systems Technology, Inc. 1 iconverter 19-Module Managed Power Chassis User s Manual 27 Mauchly, #201, Irvine, CA 92618 Phone: (949) 250-6510; Fax: (949) 250-6514 2 Omnitron Systems Technology,
More informationUser's Guide. Digital Multimeter. Model MN42
User's Guide Digital Multimeter Model MN42 Introduction Congratulations on your purchase of the Extech MN42 MultiMeter. The MN42 offers AC/DC Voltage, DC Current, and Resistance testing. Proper use and
More informationPower Supply and Fan Module Installation
3 CHAPTER This chapter describes how to remove and install a new or replacement power supply or fan module in a Catalyst 3750-E or Catalyst 3560-E switch. See these sections: Installation Overview, page
More informationINSTEON KeypadLinc TM Dimmer (Rev 1.5+) INSTEON Keypad Dimmer. For models: KeypadLinc Dimmer 8-Button
INSTEON KeypadLinc TM Dimmer (Rev 1.5+) INSTEON Keypad Dimmer For models: #2486DWH6 #2486DWH8 KeypadLinc Dimmer 6-Button KeypadLinc Dimmer 8-Button TABLE OF CONTENTS ABOUT INSTEON KEYPADLINC DIMMER...4
More informationInstallation Job Aid for VSP 4850GTS
Installation Job Aid for VSP 4850GTS Notices Release 6.1.0.0 NN46251-308 Issue 02.01 November 2017 Notice paragraphs alert you about issues that require your attention. The following paragraphs describe
More informationELECTRONIC DISPLAYS INC. 135 S. CHURCH STREET ADDISON, ILL
ELECTRONIC DISPLAYS INC. 135 S. CHURCH STREET ADDISON, ILL. 60101 www.electronicdisplays.com PRODUCT PART NUMBER : ED225MPC 2L N1-VERT-1001- KYN1 DESCRIPTION: Indoor 4 digit, 2.25 inch high, red LED, 2
More informationTreadmill Embedded Touch Screen Won t Power Up
Treadmill Embedded Touch Screen Won t Power Up E-TRe and E-TRxe This document contains the necessary information to troubleshoot a treadmill with an embedded touch screen that will not power up. Follow
More informationElectrical Management System (EMS) EMS-HW30C & EMS-HW50C
Electrical Management System (EMS) EMS-HW30C & EMS-HW50C Installation & Operating Guide for: Model EMS-HW30C Rated at 120V/30A and Model EMS-HW50C Rated at 240V/50A Surgio Says Lifetime Warranty on all
More informationAutoranging True RMS Multimeter User Manual
Autoranging True RMS Multimeter User Manual Please read this manual before switching the unit on. Important safety information inside. Contents Page 1. Safety Information... 4 2. Safety Symbols... 5 3.
More informationLED Lighting Kit For Elara NanoEdge Fixed Frame. Installation Guide. Attention: Read this guide before assembling your screen.
LED Lighting Kit For Elara NanoEdge Fixed Frame Installation Guide Attention: Read this guide before assembling your screen. INTRODUCTION GETTING STARTED WARNING - Sharp Edges This product may contain
More informationInstruction Manual. M Pump Motor Controller. For file reference, please record the following data:
Instruction Manual M Pump Motor Controller For file reference, please record the following data: Model No: Serial No: Installation Date: Installation Location: When ordering replacement parts for your
More informationLA600WH WIRED / WIRELESS DOOR CHIME
LA600WH WIRED / WIRELESS DOOR CHIME To register this product, visit: www.nutone.com THIS PACKAGE INCLUDES: Wired / Wireless Door Chime with MP3 upload capability Decorative White Chime Cover USB Cable
More information