INSTALLATION / OPERATION MANUAL JOHN DEERE 40/90 SERIES

Size: px

Start display at page:

Download "INSTALLATION / OPERATION MANUAL JOHN DEERE 40/90 SERIES"

Roderick Mason
6 years ago
Views:

1 w w w. S t a l k S t r y k e r. c o m INSTALLATION / OPERATION MANUAL JOHN DEERE 40/90 SERIES

2 INTRODUCTION IMPORTANT: Read through this instruction manual thoroughly and familiarize yourself with the machine before performing any procedures. 40/90 Series corn headers. This manual covers all Stalk Stryker row tioned headers. Please use the correct sec- Average installation time: TABLE OF CONTENTS A-STR4292 / A-STR4292C 2-row models 6 A-STR4497 / A-STR4497C 4-row models 6 A-STR6497 / A-STR6497C 6-row models 6 A-STR4098 / A-STR4098C 8-row models 10 A-STR9012N / A-STR9012NC 12-row models 20 2

3 FRAME KIT MAIN COMPONENTS & HARDWARE LIST COMPONENT FRAME KIT A-STR4292 A-STR4495 A-STR4497 A-STR6495 A-STR6497 A-STR4098 A-STR4012 A-STR9012 A-STR9012N A-STR100B A-STR A-STR A-STR264 2 A-STR269 2 A-STR125R A-STR125L A-STR3T A-STR28TR A-STR28TL A-STR32T 2 A-STR52T A-STR53T A-STR74T A-HK A-HK A-HK A-HK A-HK A-HK A-HK102 2 A-HK

4 HARDWARE KIT COMPONENTS KITS COMPONENTS A-HK650 (2) 5/8 x x 2 U-Bolts (8) 5/8 Serrated Nuts (2) 5/8 x 2 U-Bolts A-HK269 (2) 5/8 x 4 x 3 U-Bolts (8) 5/8 Serrated Nuts (2) 5/8 x 2 U-Bolts A-HK101 (1) Hitch Pin (2) 5/8 x 2 U-Bolts (1) Lynch Pin (4) 5/8 Serrated Nuts A-HK125 (1) 5/8 x 2.5 U-Bolt (2) 3/8 x 1 NC Bolts (2) 5/8 Serrated Nuts (2) 3/8 Serrated Nuts A-HK280 (2) Hitch Pins (4) 5/8 Serrated Nuts (2) Lynch Pins A-HK812 (4) 5/8 x 4.5 NC Bolts A-HK531 (2) 1/2 x 3.5 NC Bolts (2) 1/2 Serrated Nuts A-HK102 (1) Hitch Pin (2) 5/8 x 2 U-Bolts (1) Lynch Pin (4) 5/8 Serrated Nuts 4

CAUTION Follow Safety Instructions Park Machine Safely &

5 Recognize Safety Information Understand Signal Words A signal word - DANGER, WARNING, or CAUTION - DANGER WARNING CAUTION Follow Safety Instructions Park Machine Safely & Prepare Machine for Service Feeder House Safety Stop - Identi- 5

Models 2-Row 4-Row 6-Row A) Attach Main Brackets A-STR650 and A-STR652 to header using

6 INSTALLATION PROCEDURES A-STR4292 A-STR4292C 2-Row Models A-STR4497 A-STR4497C 4-Row Models A-STR4495 A-STR4495C 4-Row Models A-STR6497 A-STR6497C 6-Row Models A-STR6495 A-STR6495C 6-Row Models 2-Row 4-Row 6-Row A) Attach Main Brackets A-STR650 and A-STR652 to header using Hardware Kit A-HK650. Model # LH Side RH Side Inner-short Outer-long Inner-short Outer-long

7 Beam B) Attach the Toolbar A-STR52T or A-STR74T to the main brackets. Beam 90 Series 40 Series 90 Series 40 Series 7

8 C) Attach Stalk Stryker mount brackets A-STR100B to the toolbar using Hardware Kit A-HK Tighten all hardware. 8

D) Attach Stalk Stryker shoes A-STR101 to

Adjustment of down pressure is necessary

These instructions cover installation on

9 D) Attach Stalk Stryker shoes A-STR101 to the A-STR100B bracket. Adjustment of down pressure is necessary for the correct operation of the Stalk Stryker See page 27 for Down Pressure Adjustment instructions. These instructions cover installation on one side of the header. Repeat to complete Stalk Stryker installation on the opposite side. 9

10 INSTALLATION PROCEDURES A-STR4098 A-STR4098C 8-Row Models A) Attach Main Brackets A-STR650 and A-STR652 to header using Hardware Kit A-HK650. Model # LH Side RH Side Inner-short Outer-long Inner-short Outer-long

11 B) Attach the Toolbar A-STR74T to the main brackets Series 40 Series 90 Series 40 Series 11

12 C) Attach RH/LH End Support Brackets A-STR125R and A-STR125L using Hardware Kit A-HK drilled in the sheet metal. 12

13 D) Attach center slide Toolbars A-STR28TR and A-STR28TL using Hardware Kit A-HK280. NOTE: E) Attach Stalk Stryker mount brackets A-STR100B to the toolbar using Hardware Kit A-HK Tighten all hardware. 13

Stryker See page 27 for Down Pressure Adjustment instructions.

14 F) Attach Stalk Stryker shoes A-STR101 to the A-STR100B bracket. 21. Adjustment of down pressure is necessary for the correct operation of the Stalk Stryker See page 27 for Down Pressure Adjustment instructions. These instructions cover installation on one side of the header. Repeat to complete Stalk Stryker installation on the opposite side. 14

15 INSTALLATION PROCEDURES A-STR4012 A-STR4012C 12-Row Models A-STR9012 A-STR9012C 12-Row Models A) Attach Main Brackets A-STR650 and A-STR652 to header using Hardware Kit A-HK650. Model # LH Side RH Side Inner-short Outer-long Inner-short Outer-long

16 B) Attach Outer Brackets A-STR264 or A-STR269 to the header using Hardware Kit A-HK

17 C) Attach the Toolbar A-STR53T to the main brackets. D) Attach RH/LH End Support Brackets A-STR125R and A-STR125L using Hardware Kit A-HK

18 drilled in the sheet metal. E) Attach center slide Toolbars A-STR28TR and A-STR28TL using Hardware Kit A-HK280. NOTE: 18

19 F) Attach Stalk Stryker mount brackets A-STR100B to the toolbar using Hardware Kit A-HK Tighten all hardware. 19

20 G) Attach Stalk Stryker shoes A-STR101 to the A-STR100B bracket. 19. Adjustment of down pressure is necessary for the correct operation of the Stalk Stryker See page 27 for Down Pressure Adjustment instructions. These instructions cover installation on one side of the header. Repeat to complete Stalk Stryker installation on the opposite side. 20

A-STR652 to header using Hardware Kit A-HK650.

21 INSTALLATION PROCEDURES A-STR9012N A-STR9012NC 12-Row Narrow Models A) Attach Main Brackets A-STR650 and A-STR652 to header using Hardware Kit A-HK650. Model # LH Side RH Side Inner-short Outer-long Inner-short Outer-long

22 B) Attach the Toolbar A-STR53T to the main brackets. 74 1/2 90 Series 40 Series 90 Series 40 Series 22

1290 1291 D) Attach RH/LH End Support Brackets

23 C) Attach the Toolbar A-STR32T to the A-STR53T Toolbar using Hardware Kit A-STR D) Attach RH/LH End Support Brackets A-STR125R and A-STR125L using Hardware Kit A-HK

24 drilled in the sheet metal. E) Attach center slide Toolbars A-STR28TR and A-STR28TL using Hardware Kit A-HK NOTE: 24

25 F) Attach Stalk Stryker mount brackets A-STR100B to the toolbar using Hardware Kit A-HK Tighten all hardware. 25

26 G) Attach Stalk Stryker shoes A-STR101 to the A-STR100B bracket. Adjustment of down pressure is necessary for the correct operation of the Stalk Stryker See page 27 for Down Pressure Adjustment instructions. These instructions cover installation on one side of the header. Repeat to complete Stalk Stryker installation on the opposite side. 26

Adjustment of the down pressure is necessary for the correct operation of the Stalk Stryker A) The correct adjustment can be achieved by changing the location of the pin into one of the 8

27 Adjustment of the down pressure is necessary for the correct operation of the Stalk Stryker A) The correct adjustment can be achieved by changing the location of the pin into one of the 8 angle/height adjustment position hole locations. IMPORTANT: Be certain to adjust the Stalk Stryker to acheive the correct down pressure. mature wear or failure and will result in loss of warranty coverage for the Stalk Stryker. 27

28 TRANSPORT & STORAGE TRANSPORT SAFETY CAUTION: Stalk Stryker shoes must be removed from the operational position for transport on header carts. - A) STORAGE OPTION A-STR290 storage bracket mounting and usage 28

29 B) NOTE: On models that utilize A-STR28TR / A-STR28TL telescoping inner tubes: 29

30 w w w. S t a l k S t r y k e r. c o m CT724 July

INSTALLATION / OPERATION MANUAL CASE-IH 2600, 4200, & 4400

w w w. S t a l k S t r y k e r. c o m INSTALLATION / OPERATION MANUAL CASE-IH 2600, 4200, & 4400 INTRODUCTION IMPORTANT: Read through this instruction manual thoroughly and familiarize yourself with the