Pipe Fittings and Port Adapters

Transcription

1 Pipe Fittings and Port Adapters The Fitting Authority

2 4300 atalog Pipe Fittings and Port Adapters F5OHAO SAE-ORB / SAE-ORB F5OF SAE-ORB / NPTF FF FFF ong FF33M BSPT / BSPT Nipples G7 G7 G7 G7 G8 G5HG5 SAE-ORB / SAE-ORB GG GG44M BSPP / BSPP F5OG5 SAE-ORB / SAE-ORB ouplings Reducers, Expanders, onversions F5OG SAE-ORB / NPTF F5OHG8 SAE-ORB / Metric G8 F5OHG4 SAE-ORB / BSPP G8 FHG5 NPTF / SAE-ORB G8 FG PTR Pipe Thread Reducer G9 G9 G9 G9 G0 G0 G0 FHG8 NPTF / Metric FHG4 NPTF / BSPP F87OHG87 ISO 649 / ISO 649 F8OHG5 Metric-ORR / SAE-ORB F8OHG Metric-ORR / NPTF F4OHG5 BSPP-ORR / SAE-ORB G0 G G G G G F4OHG BSPP-ORR / NPTF PTR34 BSPT / BSPP RI-ED BSPP-ED / BSPP RI BSPP-F / BSPP F3HG BSPT/ NPTF F3HG5 BSPT / SAE-ORB G G G3 G4 G5 G5 D45 DD45 AOEG5 SAE-ORB / SAE-ORB AOEG SAE-ORB / NPTF 45 Elbows 90 Elbows AOE4G SAE-ORB / NPTF ong R G5 D G5 DD G5 A87POEG87PM ISO 649 / ISO 649 A4OEG4M BSPP-ORR / BSPP G5 G6 G6 G6 G6 G7 G7 G5G5JAO SAE-ORB Branch Tee AOG5JG5 SAE-ORB Run Tee G5G5JG5 SAE-ORB Tee RRS NPTF Tee MMS NPTF Branch Tee Tees G7 G8 G8 G8 G8 G Parker Hannifin orporation olumbus, Ohio

3 4300 atalog Pipe Fittings and Port Adapters MRO NPTF Run Tee MMO NPTF Tee MMO444 BSPP Tee KMMOO NPTF ross ross G8 P5ON SAE-ORB Hex Head G9 G9 HP5ON SAE-ORB Hollow Hex HP NPTF Hex Head SHP NPTF Square Head G9 HHP NPTF Hollow Hex Head Plugs, Bleed Adapters G9 G0 G0 G0 G0 HP NPTF Pipe ap P87OMN ISO 649 Hex Head VSTI M-OR ISO 649 Hollow Hex VSTI M-ED Metric-ED Hollow Hex VSTI R-ED BSPP-ED Hollow Hex P47OMN BSPP-ORB Hex Head G G G G G G HP3M BSPT Hex Head G Diagnostic, Orifice and Bleed Adapters (Shown in Section N) Bleed Adapters P5ONBA Bleed Screw / Bleed Adapter HPBA Bleed Screw / NPT N N O-Rings and Seals (Shown in Section O) SAE O-Ring ISO 649 O-Ring Metric O-Ring Metric Retaining Ring BSPP O-Ring O-Rings and Seals O3 O4 O4 O4 O5 BSPP Retaining Ring O5 G3 Parker Hannifin orporation olumbus, Ohio

4 4300 atalog Pipe Fittings and Port Adapters Introduction This Section contains adapters with thread types including: NPT, NPTF, BSPT, BSPP, SAE UN/UNF, and Metric. All the threads in this section are made to industry specifications with conformance shown in Table G. Thread NPT NPTF Standard ANSI B.0., FED-STD-H8/7 SAE J476, ANSI B.0.3, FED-STD-H8/8 Design and onstruction Shaped products (elbows, tees and crosses) are hot forged and machined, while straights are manufactured from cold dawn barstock. Where applicable, these products are made in conformance with the design criteria of the society of Automotive Engineers Standards, SAE J54, J530. Parker Fluid onnector products made from steel and brass, for the most part, have NPTF threads. Stainless steel products may have NPT or slightly modified NPT threads to minimize the chance of galling on assembly. Standard Material Specifications: The standard materials used in the manufacture of Industrial Pipe and Adapter fittings are shown in Table G. Note: Upon request, pipe fittings, adapters and plugs could be furnished in materials other than those shown in the materials specifications chart. Finish - Zinc with Yellow hromate is used on all standard steel products. Stainless steel fittings are passivated. BSPT BS, ISO 7/ BSPP BS 779, ISO 8/ Metric UN/UNF* ISO 6, ANSI B.3M, FED-STD-H8/ ANSI B., FED-STD-H8/ *lass A or B Table G Thread onformance Standards Pipe Fittings, Steel Stainless Steel Brass Adapters and Plugs ASTM Type ASTM Type ASTM Type Forged Bodies A576 4/5 A8 36 B4 A377 Bar Stock Bodies A08 4 A old Formed Bodies A / 008 B6 B453 A360 A345 Table G Standard Material Specifications for Industrial Pipe Fittings and Adapters How Port onnections Work Tapered ( Pipe ) Threads There are three types of tapered threads commonly used in industrial applications. NPT/NPTF BSPT Metric Taper All three thread styles noted above use the same basic metalto-metal sealing design for achieving a seal. Although very similar, there are differences in the thread dimensions, pitch, and flank angle that do not allow interchangeability. NPT / NPTF Threads NPT threads, when assembled without a sealant, leave a spiral leak path at the crest-root junction as shown in Fig. G. To seal pressurized fluid, NPT threads require a suitable sealant. NPTF threads (Dryseal), on the other hand, when assembled, do not leave such spiral leak path. This is because they have controlled truncation at the crest and root, ensuring metal to metal crest-root contact prior to, or just as the malefemale thread flanks make contact as seen in Fig. G. Upon further tightening, the thread crests are flattened out until the flanks also make metal to metal contact as seen in Fig. G3. Thus, theoretically at least, there is no passage left for the fluid to leak, provided all surfaces are flawless and dimensions exact. In reality, this is not the case and a sealant/lubricant is necessary to achieve a leak free joint, even with NPTF threads. The sealant/lubricant fills all imperfections in the surfaces affecting the seal and also provides lubrication to ease assembly and minimize galling. G4 Spiral leak path Fig. G NPT: Wrench Tight, No rest- Root ontact, Flank ontact Only Fig. G NPTF: Hand Tight, rest to Root ontact Thread crest and root in contact. Gap remains at flank angles. Full thread form contact Fig. G3 NPTF: Wrench Tight, rest to Root and Flank ontact Parker Hannifin orporation olumbus, Ohio

5 4300 atalog Pipe Fittings and Port Adapters Application Guidelines for Taper Threads Straight onnectors with NPT/NTPF 3/4-4 and Smaller Straight connectors with 3/4-4 NPT/NPTF and smaller male pipe threads have very high pressure holding capability and seal reliability when used in applications without make and break (such as maintenance) requirements. They are also well suited for low cycle non-pulsating (static) applications with pressures in excess of 6,000 psi. Straight onnectors with NPT/NPTF above 3/4-4 and All Shaped onnectors with NPT/NPTF Threads It is difficult to always tighten shapes with pipe threads to an optimum tightness level because of orientation requirements. Also, all connectors in this category with pipe threads have low reliability for leak free operation in dynamic applications. Therefore, they are not preferred where a leak free joint is required. All NPTF onnectors While a pipe thread connection can be disassembled and reassembled in low-pressure systems, it is not intended to be a frequently assembled and disassembled connection. When connectors are known to be disassembled and re-assembled repeatedly, pipe connections are not preferred for high-pressure systems. For the above applications, a port connection with an elastomeric seal, such as SAE straight thread port (SAE J96/ ISO96), SAE four bolt split flange (SAE J58/ISO 66), and ISO 649 is recommended. For applications where elastomeric seals can t be used, consult the manufacturer. As noted, BSPT and metric taper are designed and perform similarly. Follow the NPT/NPTF guidelines for their application. In general, tapered thread connections have the following limitations which should be considered when specifying port connections: Poor dynamic sealing characteristics Possible expansion, and even cracking, of the port Orientation is a concern in shaped connectors arger threads are more prone to leakage because of more potential leak points System contamination due to thread sealant Prone to galling, especially in stainless steel imited remakeability Parallel Thread Adapters Straight, or parallel, thread ports in various forms are becoming more popular in hydraulic systems because they are more reliable and easier to service. Three types of threads are used for parallel thread ports: UN/ UNF (SAE straight thread), BSPP (British Standard Pipe, Parallel) and metric parallel. Because parallel threads only serve one function (i.e. holding the fitting in place), some other means of sealing is always present, such as an elastomeric O- ring or a metal seal. There are many variations of sealing methods, and in some cases they are interchanged among the different thread forms and may appear to be similar. SAE / UNF Threads SAE J96 uses UN/UNF threads and is often referred to as SAE Straight Threads. The female port is often referred to as ORB or O-ring boss. This port style, shown in Fig. G4, is widely used in North America. BSPP Fig. G4 Typical O-Ring Boss Port In Europe, Japan and many other former ommonwealth nations the British Standard Pipe thread form, BSP, is still used extensively to connect pipes and components in hydraulic systems. The BSP thread is offered in a straight (parallel) form known as BSPP and a tapered form known as BSPT. These threads feature a 55 flank angle. Fittings in this section with male BSPP threads use a primary sealing method of an O-ring and retaining ring, as shown in Fig. G5. Fig. G5 O-Ring with Retaining Ring Additional sealing methods such as a cutting face or an EOlastic seal, as shown in Fig. G6, are also available on other fittings within the catalog. These BSPP fittings are all designed to thread into a female BSPP port (ISO 79), however, the seal is created with one of the aforementioned sealing methods, not with the threads. It is also important to note that with these BSPP threaded connection, the seal occurs on the port surface or spotface, not in an O-ring gland or chamfer as SAE and ISO- 649 straight thread do. A detail of the BSPP port is shown on page U9. Fig. G6 O-Ring in Fitting Groove G5 Parker Hannifin orporation olumbus, Ohio

6 4300 atalog Pipe Fittings and Port Adapters Metric Parallel In Europe, primarily in Germany, the traditional metric parallel thread form is used extensively to connect components in hydraulic systems. This metric thread is designed to thread into and seal in a female Metric parallel port conforming to ISO (DIN-385, Part ). Fittings in this section with male metric threads use a primary sealing method of an O-ring and retaining ring. Additional sealing methods such as a cutting face or an EOlastic seal are also available on other fittings within the catalog. Sealing is accommodated with one of the aforementioned sealing methods, not with the threads. It is also important to note that with these male metric threads, the seal occurs on the top face (spotface) of the port, not in an O- ring gland or chamfer as in SAE and ISO-649 straight threads. A detail of this metric port is shown on page U5. To minimize further proliferation of additional port thread styles, the International Standards Organization Technical ommittee 3 has completed the development of a world standard leak-free port connection. It is recommended that this port, ISO 649-, be specified in all new hydraulic fluid power applications. Parker and other fluid connector manufacturers are expanding product offering to incorporate the ISO 649 male studs as a standard on many tube fitting products. Parker offers the ISO 649 male stud end, shown in Fig. G7, on several tube fitting products including: Seal-ok, EO, EO-, onversion Adapters, Plugs, etc. This port, utilizes metric parallel threads for mechanical holding power and a sealing method similar to the proven SAE Straight Thread O-ring port. A detail of this metric port is shown on page U6. Indentification Groove Fig. G7 ISO 649 Male Feature Advantage Benefit ompact size Widespread general use High static pressure rating Pipe Thread Fittings Use in restricted spaces Smaller space required Smaller components Available worldwide for OEM and MRO omponent parts and replacement fittings applications are available virtually anywhere Used in very high pressure applications Versatility Economical in several materials Adaptability Works in high temperature applications Steel, stainless steel and brass are common materials Adatpable to ORFS, flareless bity type, metric bite type, 37 flare, etc. Withstands higher temperatures as compared to elastomeric seals Allows customers to match media and temperature applications without special fittings and seals Versatility No concerns regarding seals. Versatility. Straight Thread Fittings Reliable dynamic sealing Ideal for high pressure, cycling Reliable, long-term sealing systems Separation of sealing and ompletely remakeable ong-term economical solution holding functions Easier assembly No thread damage Ease of installation and service No system contamination No concerns regarding thread sealants Reliable contaminating and damaging sensitive hydraulic systems Infinite positioning Ease of orientation Flexible routing. No port damage. O-ring more tolerant of surface imperfections Minor port surface and thread imperfections do not impede proper sealing eak-free solution G6 Parker Hannifin orporation olumbus, Ohio

7 4300 atalog Pipe Fittings and Port Adapters F5OHAO Straight Thread Union SAE-ORB / SAE-ORB HPD Base # PART # UN/UNF-A UN/UNF-A 4 F5OHAO 7/6-0 7/6-0 9/ F5OHAO 9/6-8 9/6-8 / F5OHAO 3/4-6 3/4-6 7/ F5OHAO 7/8-4 7/ F5OHAO /6- /6- / F5OHAO 5/6-5/6- / F5OHAO 5/8-5/8-7/ F5OHAO 7/8-7/8- / F5OHAO /- /- 3/ (x,000 PSI) F5OF Male Pipe Adapter SAE-ORB / NPTF (x,000 PSI) PART # UN/UNF-A NPTF 4-/8 F5OF 7/6-0 /8-7 9/ /4 F5OF 7/6-0 /4-8 9/ /4 F5OF /-0 /4-8 5/ /4 F5OF 9/6-8 /4-8 / /8 F5OF 9/6-8 3/8-8 / /8 F5OF 3/4-6 3/8-8 7/ / F5OF 3/4-6 /-4 7/ / F5OF 7/8-4 / /4 F5OF /6-3/4-4 / /4 F5OF 5/6-3/4-4 / F5OF 5/6- - / / /4 F5OF 5/8- /4- / 7/ / F50F 7/8- /- / / AD FF Pipe Nipple HPD Base # 00 FFF ong Pipe Nipple (x,000 PSI) (x,000 PSI) PART # NPTF NPTF PART # NPTF NPTF /8 FF /8-7 /8-7 7/ /8 x.5 FFF /8-7 /8-7 7/ /4 x /8 FF /4-8 /8-7 5/ /8 x.0 FFF /8-7 /8-7 7/ /4 FF /4-8 /4-8 5/ /8 x.5 FFF /8-7 /8-7 7/ /8 x /8 FF 3/8-8 /8-7 3/ /8 x 3.0 FFF /8-7 /8-7 7/ /8 x /4 FF 3/8-8 /4-8 3/ /4 x.5 FFF /4-8 /4-8 5/ /8 FF 3/8-8 3/8-8 3/ /4 x.0 FFF /4-8 /4-8 5/ / x /8 FF /-4 /8-7 7/ /4 x.5 FFF /4-8 /4-8 5/ / x 3/8 FF /-4 3/8-8 7/ /4 x 3.0 FFF /4-8 /4-8 5/ / x /4 FF /-4 /4-8 7/ /4 x 4.0 FFF /4-8 /4-8 5/ / FF /-4 /-4 7/ /8 x.0 FFF 3/8-8 3/8-8 3/ /4 x /4 FF 3/4-4 /4-8 / /8 x 3.0 FFF 3/8-8 3/8-8 3/ /4 x 3/8 FF 3/4-4 /4-8 / /8 x 3.5 FFF 3/8-8 3/8-8 3/ /4 x / FF 3/4-4 /-4 / /8 x 4.0 FFF 3/8-8 3/8-8 3/ /4 FF 3/4-4 3/4-4 / / x.0 FFF /-4 /-4 7/ x /4 - / /4-8 3/ / x.5 FFF /-4 /-4 7/ x 3/8 FF - / 3/8-8 3/ / x 3.0 FFF /-4 /-4 7/ x / FF - / /-4 3/ / x 4.0 FFF /-4 /-4 7/ x 3/4 FF - / 3/4-4 3/ / x 6.0 FFF /-4 /-4 7/ FF - / - / 3/ /4 x 3.0 FFF 3/4-4 3/4-4 / /4 x FF /4- / - / 3/ x 3.0 FFF - / - / 3/ /4 FF /4- / /4- / 3/ / x FF /- / - / / FF /- / /- / x / - / /- / /.79.4 FF - / - / / Note: All FF fittings have a 30 chamfer for sealing with NPSM swivel type fittings. G7 Parker Hannifin orporation olumbus, Ohio

8 4300 atalog Pipe Fittings and Port Adapters FF33M BSPT Pipe Nipple BSPT / BSPT 6 G5HG5 Straight Thread oupling Female SAE / Female SAE 6 PART # BSPT BSPT /8FF33M /8-8 / /4x/8FF33M /4-9 / /4FF33M /4-9 / /8x/4FF33M 3/8-9 / /8FF33M 3/8-9 3/ /FF33M /-4 / /x3/8ff33m /-4 3/ /4FF33M 3/4-4 3/ /4x/FF33M 3/4-4 / FF33M (x,000 PSI) PART # UN/UNF-B UN/UNF-B 4 G5HG5 7/6-0 7/6-0 / G5HG5 9/6-8 9/6-8 3/ G5HG5 3/4-6 3/ G5HG5 7/8-4 7/8-4 3/ G5HG5 /6- /6-3/ G5HG5 5/6-5/6-5/ (x,000 PSI) AD GG Pipe oupling SAE 4038 HPD Base # 00 W W GG44M BSPP Female Union BSPP / BSPP 6 W W (x,000 PSI) PART # NPTF NPTF /8 GG /8-7 /8-7 5/ /4 x /8 GG /4-8 /8-7 3/ /4 GG /4-8 /4-8 3/ /8 x /8 GG 3/8-8 /8-7 7/ /8 x /4 GG 3/8-8 /4-8 7/ /8 GG 3/8-8 3/8-8 7/ / x /8 GG /-4 /8-7 / / x /4 GG /-4 /4-8 / / x 3/8 GG /-4 3/8-8 / / GG /-4 /-4 / /4 x /4 GG 3/4-4 /4-8 3/ /4 x / GG 3/4-4 /-4 3/ /4 GG 3/4-4 3/4-4 3/ x / GG - / /-4 5/ x 3/4 GG - / 3/4-4 5/ GG - / - / 5/ /4 x GG /4- / - / /4 GG /4- / /4- / / x /4 /- / /4- / 3/ / GG /- / /- / 3/ GG - / - / 7/ PART # BSPP BSPP /8GG44M /8-8 / /4GG44M /4-9 / /8GG44M 3/8-9 3/ /8x/4GG44M 3/8-9 / /GG44M /-4 / /x3/8gg44m /-4 3/ GG44M (x,000 PSI) G8 Parker Hannifin orporation olumbus, Ohio

9 4300 atalog Pipe Fittings and Port Adapters F5OG5 Straight Thread Reducer / Expander SAE-ORB / SAE-ORB SAE HPD Base # 050 PART # UN/UNF-A UN/UNF-B -4 F5OG5 5/6-4 7/6-0 / F5OG5 7/6-0 7/6-0 / F5OG5 7/6-0 9/6-8 3/ F5OG5 9/6-8 7/6-0 / F5OG5 9/6-8 9/6-8 3/ F5OG5 9/6-8 3/4-6 / F5OG5 3/4-6 7/6-0 7/ F5OG5 3/4-6 9/6-8 7/ F5OG5 3/4-6 7/8-4 / F5OG5 7/8-4 7/ F5OG5 7/8-4 9/ F5OG5 7/8-4 3/ F5OG5 7/8-4 /6-3/ F5OG5 /6-7/6-0 / F5OG5 /6-9/6-8 / F5OG5 /6-3/4-6 / F5OG5 /6-7/8-4 / F5OG5 /6-5/6-5/ F5OG5 5/6-9/6-8 / F5OG5 5/6-3/4-6 / F5OG5 5/6-7/8-4 / F5OG5 5/6- /6- / F5OG5 5/6-5/8- / F5OG5 5/8-9/6-8 7/ F5OG5 5/8-3/4-6 7/ F5OG5 5/8-7/8-4 7/ F5OG5 5/8- /6-7/ F5OG5 5/8-5/6-7/ F5OG5 5/8-7/8- / F5OG5 7/8-9/6-8 / F5OG5 7/8- /6- / F5OG5 7/8-5/6- / F5OG5 7/8-5/8- / F5OG5 /- 5/8-3/ F5OG5 /- 7/8-3/ F5OG Female Pipe Adapter SAE-ORB / NPTF (x,000 PSI) (x,000 PSI) PART # UN/UNF-A NPTF -/8 F5OG 5/6-4 /8-7 9/ /8 F5OG 7/6-0 /8-7 9/ /4 F5OG 7/6-0 /4-8 3/ /8 F5OG /-0 /8-7 5/ /4 F5OG /-0 /4-8 3/ /8 F5OG 9/6-8 /8-7 / /4 F5OG 9/6-8 /4-8 3/ /8 F5OG 9/6-8 3/8-8 7/ / F5OG 9/6-8 /-4 / /8 F5OG 3/4-6 /8-7 7/ /4 F5OG 3/4-6 /4-8 7/ /8 F5OG 3/4-6 3/8-8 7/ / F5OG 3/4-6 /-4 / /4 F5OG 7/8-4 / /8 F5OG 7/8-4 3/ / F5OG 7/8-4 /-4 / /4 F5OG 7/8-4 3/4-4 3/ /4 F5OG /6- /4-8 / /8 F5OG /6-3/8-8 / / F5OG /6- /-4 / /4 F5OG /6-3/4-4 3/ / F5OG 3/6- /-4 3/ /4 F5OG 3/6-3/4-4 3/ / F5OG 5/6- /-4 / /4 F5OG 5/6-3/4-4 / F5OG 5/6- - / 5/ F5OG 5/8- - / 7/ /4 F5OG 5/8- /4- / / F5OG 5/8- /-4 / F5OG 7/8- - / / /4 F5OG 7/8- /4- / / / F5OG 7/8- /- / / F5OG /- - / 7/ AD F5OHG8 onversion Adapter SAE-ORB / Metric F5OHG4 onversion Adapter SAE-ORB / BSPP (x,000 PSI) (x,000 PSI) PART # UN/UNF-A Metric Str. S SS B PART # UN/UNF-A BSPP S SS B 4M0F5OHG8 7/6-0 M0x 5/ /8F5OHG4 7/6-0 /8-8 5/ MF5OHG8 7/6-0 Mx.5 3/ /4F5OHG4 7/6-0 /4-9 3/ M4F5OHG8 9/6-8 M4x.5 3/ /4F5OHG4 9/6-8 /4-9 3/ M6F5OHG8 9/6-8 M6x.5 5/ /8F5OHG4 9/6-8 3/8-9 7/ M6F5OHG8 3/4-6 M6x.5 5/ /4F5OHG4 3/4-6 /4-9 7/ M8F5OHG8 3/4-6 M8x /8F5OHG4 3/4-6 3/8-9 5/ MF5OHG8 7/8-4 Mx.5 3/ /F5OHG4 7/8-4 /-4 / M7F5OHG8 /6- M7x / /4F5OHG4 /6-3/4-4 7/ M33F5OHG8 5/6- M33x 3/ F5OHG4 5/6- - 7/ G9 Parker Hannifin orporation olumbus, Ohio

10 4300 atalog Pipe Fittings and Port Adapters FHG5 Female Straight Thread Adapter NPTF / SAE-ORB HPD Base # 00 PART # NPTF UN/UNF-A /8-4 FHG5 /8-7 7/6-0 / /8-5 FHG5 /8-7 /-0 3/ /4-6 FHG5 /4-8 9/6-8 3/ /8-6 FHG5 3/8-8 9/6-8 3/ /8-8 FHG5 3/8-8 3/ /-6 FHG5 /-4 9/6-8 7/ /-8 FHG5 /-4 3/ /-0 FHG5 /-4 7/8-4 / /4-8 FHG5 3/4-4 3/4-6 / /4- FHG5 3/4-4 /6-3/ FHG5 - / 5/6-5/ PTR Pipe Thread Reducer SAE 4040 HPD Base # 00 (x,000 PSI) (x,000 PSI) PART # NPTF NPTF /4 x /8 PTR /4-8 /8-7 5/ /8 x /8 PTR 3/8-8 /8-7 3/ /8 x /4 PTR 3/8-8 /4-8 3/ / x /8 PTR /-4 /8-7 7/ / x /4 PTR /-4 /4-8 7/ / x 3/8 PTR /-4 3/8-8 7/ /4 x /8 PTR 3/4-4 /8-7 / /4 x /4 PTR 3/4-4 /4-8 / /4 x 3/8 PTR 3/4-4 3/8-8 / /4 x / PTR 3/4-4 /-4 / x /8 PTR - / /8-7 3/ x /4 PTR - / /4-8 3/ x 3/8 PTR - / 3/8-8 3/ x / PTR - / /-4 3/ x 3/4 PTR - / 3/4-4 3/ /4 x /4 PTR /4- / /4-8 3/ /4 x 3/8 PTR /4- / 3/8-8 3/ /4 x / PTR /4- / /-4 3/ /4 x 3/4 PTR /4- / 3/4-4 3/ /4 x PTR /4- / - / 3/ / x /4 PTR /- / / / x 3/8 PTR /- / 3/ / x / PTR /- / / / x 3/4 PTR /- / 3/ / x PTR /- / - / / x /4 PTR /- / /4- / x / PTR - / /-4 /.75.4 x 3/4 - / 3/4-4 /.75.4 x PTR - / - / / x /4 PTR - / /4- / / x / PTR - / /- / / FG Expander / Adapter SAE 4039 HPD Base # 00 FHG8 onversion Adapter NPTF / Metric PART # NPTF NPTF /8 x /6 FG /6-7 /8-7 5/ /8 FG /8-7 /8-7 5/ /4 x /8 FG /8-7 /4-8 3/ /4 FG /4-8 /4-8 3/ /8 x /8 FG /8-7 3/8-8 7/ /8 x /4 FG /4-8 3/8-8 7/ /8 FG 3/8-8 3/8-8 7/ / x /8 FG /8-7 /-4 / / x /4 FG /4-8 /-4 / / x 3/8 FG 3/8-8 /-4 / / FG /-4 /-4 / /4 x /4 FG /4-8 3/4-4 3/ /4 x 3/8 FG 3/8-8 3/4-4 3/ /4 x / FG /-4 3/4-4 3/ /4 FG 3/4-4 3/4-4 3/ x /4 FG /4-8 - / 5/ x / FG /-4 - / 5/ x 3/4 FG 3/4-4 - / 5/ FG - / - / 5/ /4 x FG - / /4- / /4 FG /4- / /4- /.50.5 / x FG - / /- / 3/ / x /4 FG /4- / /- / 3/ FG - / - / 7/ PART # NPTF Metric Str. /8M0FHG8 /8-7 M0x 5/ /8MFHG8 /8-7 Mx.5 3/ /4M4FHG8 /4-9 M4x.5 3/ /4M6FHG8 /4-9 M6x.5 5/ /8M8FHG8 3/8-9 M8x /MFHG8 /-4 Mx.5 3/ /4M7FHG8 3/4-4 M7x / (x,000 PSI) (x,000 PSI) S SS B AD G0 Parker Hannifin orporation olumbus, Ohio

11 4300 atalog Pipe Fittings and Port Adapters FHG4 onversion Adapter NPTF / BSPP PART # NPTF BSPP /4X/4FHG4 /4-8 /4-9 3/ /4X3/8FHG4 /4-8 3/8-9 3/ /8X/4FHG4 3/8-8 /4-9 3/ /8X3/8FHG4 3/8-8 3/ /X3/8FHG4 /-4 3/8-9 5/ /X/FHG4 /-4 /-4 / /4X3/4FHG4 3/4-4 3/4-4 7/ (x,000 PSI) S SS B F87OHG87 Reducer / Expander ISO 649 / ISO 649 PART # Metric Str. Metric Str. S SS B M8M0F87OHG87MS M8x M0x M0M8F87OHG87MS M0x M8x M0MF87OHG87MS M0x Mx MM0F87OHG87MS Mx.5 M0x MM4F87OHG87MS Mx.5 M4x MM6F87OHG87MS Mx.5 M6x M4MF87OHG87MS M4x.5 Mx M4M6F87OHG87MS M4x.5 M6x M6M4F87OHG87MS M6x.5 M4x M6M8F87OHG87MS M6x.5 M8x M8M6F87OHG87MS M8x.5 M6x M8M0F87OHG87MS M8x.5 M0x M0M8F87OHG87MS M0x.5 M8x M0MF87OHG87MS M0x.5 Mx MM0F87OHG87MS Mx.5 M0x M7M33F87OHG87MS M7x.0 M33x M33M4F87OHG87MS M33x.0 M4x M4M7F87OHG87MS M4x.0 M7x M4M48F87OHG87MS M4x.0 M48x (x,000 PSI) AD F8OHG5 onversion Adapter Metric-ORR / SAE-ORB (for ISO 9974 / DIN 385- Port) F8OHG onversion Adapter Metric-ORR / NPTF (for ISO 9974 / DIN 385- Port) PART # Metric Str. UN/UNF-B M0-4F8OHG5 M0x 7/6-0 / M0-6F8OHG5 M0X 9/6-8 7/ M4-6F8OHG5 M4x.5 9/6-8 3/ M6-8F8OHG5 M6x.5 3/ M8-8F8OHG5 M8X.5 3/ M-0F8OHG5 Mx.5 7/8-4 / M7-F8OHG5 M7x /6- / M33-6F8OHG5 M33x 5/6-5/8.9 M4-0F8OHG5 M4x 5/8-.9 (x,000 PSI) PART # Metric Str. NPTF M0-/8F8OHG M0x.0 /8-7 9/ M-/4F8OHG Mx.5 /4-8 3/ M4-/4F8OHG M4x.5 /4-8 3/ M6-3/8F8OHG M6x.5 3/8-8 7/ M6-/F8OHG M6x.5 /-4 / M8-3/8F8OHG M8x.5 3/8-8 5/ M8-/F8OHG M8x.5 /-8 / M-/F8OHG Mx.5 /-4 / M7-3/4F8OHG M7x.0 3/4-4 3/ M33-F8OHG M33x.0 - / 5/ (x,000 PSI) G Parker Hannifin orporation olumbus, Ohio

12 4300 atalog Pipe Fittings and Port Adapters F4OHG5 onversion Adapter BSPP-ORR / SAE-ORB (for ISO 79- / DIN 385- Port) F4OHG onversion Adapter BSPP-ORR / NPTF (for ISO 79- / DIN 385- Port) 6 (x,000 PSI) (x,000 PSI) PART # BSPP UN/UNF-B PART # BSPP NPTF /8-4F4OHG5 /8-8 7/6-0 / /8X/8F4OHG /8-8 /8-7 5/ /4-4F40HG5 /4-9 7/6-0 3/ /4X/4F4OHG /4-9 /4-8 3/ /4-6F4OHG5 /4-9 9/6-8 3/ /8X3/8F4OHG 3/8-9 3/8-8 7/ /8-4F40HG5 3/8-9 7/6-0 7/ /X/F4OHG /-4 /-4 / /8-5F4OHG5 3/8-9 /-0 7/ /4X3/4F4OHG 3/4-4 3/4-4 3/ /8-6F4OHG5 3/8-9 9/6-8 7/ XF4OHG - - / 5/ /8-8F4OHG5 3/8-9 3/ /-0F4OHG5 /-4 7/8-4 / /4-F4OHG5 3/4-4 /6-3/ F4OHG5-5/6-3/ /4-6F4OHG5 /4-5/ /4-0F4OHG5 /4-5/ AD PTR34 BSPT Reducing Adapter BSPT / BSPP PART # BSPT BSPP /4X/8PTR34M /4-9 / /8X/4PTR34M 3/8-9 / /X/4PTR34M /-4 / /X3/8PTR34M /-4 3/ (x,000 PSI) G Parker Hannifin orporation olumbus, Ohio

13 4300 atalog Pipe Fittings and Port Adapters RI-ED BSPP Reducing Adatper / Expander BSPP / BSPP-ED (for ISO 79- / DIN 385- Port) d3 Fig. A d3 S FIG. S d3 EOlastic Seal (x,000 PSI) PART # BSPP BSPP RI/8EDX/4 G/4 G/8A B RI/8EDX3/8 G3/8 G/8A B RI/4EDX/8 G/8 G/4A B RI/4EDX3/8 G3/8 G/4A B RI/4EDX/ G/ G/4A B RI/4EDX3/4 G3/4 G/4A B RI3/8EDX/8 G/8 G3/8A.5 A RI3/8EDX/4 G/4 G3/8A 36 B RI3/8EDX/ G/ G3/8A 4 30 B RI3/8EDX3/4 G3/4 G3/8A B RI/EDX/8 G/8 G/A A RI/EDX/4 G/4 G/A A RI/EDX3/8 G3/8 G/A B RI/EDX3/4 G3/4 G/A B RI/EDX G G/A B RI/EDX/4 G /4 G/A B RI3/4EDX/4 G/4 G3/4A A RI3/4EDX3/8 G3/8 G3/4A A RI3/4EDX/ G/ G3/4A B RI3/4EDX G G3/4A B RI3/4EDX/4 G /4 G3/4A B RI3/4EDX/ G / G3/4A B RIEDX/4 G/4 GA A RIEDX3/8 G3/8 GA A RIEDX/ G/ GA A RIEDX3/4 G3/4 GA A RIEDX/4 G /4 GA B RIEDX/ G / GA B RI/4EDX/ G/ G /4A A RI/4EDX3/4 G3/4 G /4A A RI/4EDX G G /4A B RI/4EDX/ G / G /4A B RI/EDX/ G/ G /A A RI/EDX3/4 G3/4 G /A A RI/EDX G G /A A RI/EDX/4 G /4 G /A B RIEDX/ G / G A B.3 A3 7 MS Fig. B EOlastic Seal S AD G3 Parker Hannifin orporation olumbus, Ohio

14 4300 atalog Pipe Fittings and Port Adapters RI BSPP Reducing Adatper / Expander BSPP / BSPP-F (for ISO 79- / DIN 385- Port) d3 Fig. A d3 S FIG. utting Face PART # BSPP BSPP A3 7 MS RI/8X/4 G /4 G /8A B RI/8X3/8 G 3/8 G /8A B RI/4X/8 G /8 G /4A B RI/4X3/8 G 3/8 G /4A B RI/4X/ G / G /4A B RI/4X3/4 G 3/4 G /4A B RI3/8X/8 G /8 G 3/8A.5 A RI3/8X/4 G /4 G 3/8A 36 B RI3/8X/ G / G 3/8A 4 30 B RI3/8X3/4 G 3/4 G 3/8A B RI/X/8 G /8 G /A A RI/X/4 G /4 G /A A RI/X3/8 G 3/8 G /A B RI/X3/4 G 3/4 G /A B RI/X G G /A B RI/X/4 G /4 G /A B RI3/4X/4 G /4 G 3/4A A RI3/4X3/8 G 3/8 G 3/4A A RI3/4X/ G / G 3/4A B RI3/4X G G 3/4A B RI3/4X/4 G /4 G 3/4A B RI3/4X/ G / G 3/4A B RIX/4 G /4 G A A RIX3/8 G 3/8 G A A RIX/ G / G A A RIX3/4 G 3/4 G A B RIX/4 G /4 G A B.3 RIX/ G / G A B.3 RI/4X/ G / G /4A A RI/4X3/4 G 3/4 G /4A A RI/4X G G /4A B RI/4X/ G / G /4A B RI/X/ G / G /A A RI/X3/4 G 3/4 G /A A RI/X G G /A A RI/X/4 G /4 G /A B RIX/ G / G A B.3 S Fig. B d3 (x,000 PSI) utting Face S AD G4 Parker Hannifin orporation olumbus, Ohio

15 4300 atalog Pipe Fittings and Port Adapters F3HG onversion Adapter NPTF / BSPT 6 F3HG5 onversion Adapter BSPT / SAE-ORB 6 PART # NPTF BSPT /8X/8F3HG /8-7 /8-8 9/ /4X/4F3HG /4-8 /4-9 3/ /8X3/8F3HG 3/8-8 3/8-9 7/ /X/F3HG /-4 /-4 / /4X3/4F3HG 3/4-4 3/4-4 3/ XF3HG - / - 5/ (x,000 PSI) (x,000 PSI) PART # BSPT UN/UNF-B /8-4F3HG5 /8-8 7/6-0 / /8-5F3HG5 /8-8 /-0 3/ /4-6F3HG5 /4-9 9/6-8 3/ /8-8F3HG5 3/8-9 3/ /-0F3HG5 /-4 7/ /4-F3HG5 3/4-4 / F3HG5-5/ AD D45 45 Street Elbow SAE HPD Base # 30 Y* N4 N3 *Y Across Wrench Flats DD45 45 Female Pipe Elbow SAE HPD Base # 40 Y* N Typ. *Y Across Wrench Flats N3 PART # NPTF NPTF /8 D45 /8-7 / / /4 D45 /4-8 / / /8 D45 3/8-8 3/ / / D45 /-4 / / /4 D45 3/4-4 3/ / D45 - / - /.3.7 5/8.8.8 /4 D45 /4- / /4- / /8.5.5 N4 Y (x,000 PSI) N Y (x,000 PSI) PART # NPTF NPTF /4 DD45 /4-8 / / /8 DD45 3/8-8 3/ /8 4.5 / DD45 /-4 / / /4 DD45 3/4-4 3/ /6 3.0 DD45 - / - /.9 5/8.8 AOEG5 Straight Thread Elbow SAE-ORB / SAE-ORB HPD Base # 50 Y* M N * Y Across Wrench Flats AOEG Female Pipe Elbow NPT / SAE-ORB HPD Base # 50 Y* M N *Y Across Wrench Flats M N Y PART # UN/UNF-A UN/UNF-B 4 AOEG5 7/6-0 7/ / AOEG5 9/6-8 9/ / AOEG5 3/4-6 3/ / AOEG5 7/8-4 7/ /6 4.5 AOEG5 /6- / / AOEG5 5/6-5/ /8 3.0 (x,000 PSI) M N Y PART # NPTF UN/UNF-A 6-/4 AOEG /4-8 9/ / /8 AOEG 3/8-8 3/ / / AOEG /-4 7/ / /4 AOEG 3/4-4 / / AOEG - / 5/ /8.8 (x,000 PSI) G5 Parker Hannifin orporation olumbus, Ohio

16 4300 atalog Pipe Fittings and Port Adapters AOE4G Extra ong Female Pipe Elbow NPT / SAE-ORB HPD Base # 550 M N Y PART # NPTF UN/UNF-A 8-3/8 AOE4G 3/8-8 3/ / / AOE4G /-4 7/ / /4 AOE4G 3/4-4 / / AOE4G - / 5/ /8.8 Y* M N *Y Across Wrench Flats (x,000 PSI) R Male Pipe Elbow SAE 4037* N * Not shown in SAE J54, but coded per SAE J846. N Y* N N * Y Across Wrench Flats Y PART # NPTF NPTF /8 R /8-7 / / /4 R /4-8 / / /8 x /4 R 3/8-8 / / /8 R 3/8-8 3/ / / x 3/8 R /-4 3/ / / R /-4 / / /4 x / R 3/4-4 / / /4 R 3/4-4 3/ / x 3/4 R - / 3/ /6 3.0 R - / - / / /4 R /4- / /4- /.. 7/8.5.5 / R /- / /- / /8.5 (x,000 PSI) AD D Street Elbow N Y* N DD Female Pipe Elbow Y* N Typ. SAE 4039 HPD Base # 0 *Y Across Wrench Flats SAE 4038 HPD Base # 0 *Y Across Wrench Flats N PART # NPTF NPTF /8 x /4 D /8-7 / / /8 D /8-7 / / /4 x /8 D /4-8 / / /4 x / D /4-8 / /6 3.0 /4 x 3/8 D /4-8 3/ / /4 D /4-8 / / /8 x /4 D 3/8-8 / / /8 x / D 3/8-8 / / /8 D 3/8-8 3/ / / x 3/8 D /-4 3/ / / x 3/4 D /-4 3/ / / D /-4 / / /4 x / D 3/4-4 / / /4 D 3/4-4 3/ / D - / - / / /4 x / D /4- / /- /.6.08 /.5 /4 D /4- / /4- / /8.5.5 / D /- / /- / /.5.5 N Y (x,000 PSI) N Y (x,000 PSI) PART # NPTF NPTF /8 DD /8-7 / / /4 DD /4-8 / / /8 DD 3/8-8 3/ / / x 3/8 DD /-4 3/8-8.3 /6 3.0 / DD /-4 /-4.3 / /4 DD 3/4-4 3/ / DD - / - /.63 7/ /4 DD /4- / /4- /.70 7/8.5.5 / DD /- / /- /.08 /.5.5 G6 Parker Hannifin orporation olumbus, Ohio

17 4300 atalog Pipe Fittings and Port Adapters A87POEG87PM ISO 649* Female Elbow ISO 649 / ISO 649 S I I S PART # Metric Metric M08A87POEG87PM M8x M8x M0A87POEG87PM M0x M0x MA87POEG87PM Mx.5 Mx M4A87POEG87PM M4x.5 M4x * Male and female thread lengths have been shortened for compact design. The lengths do not conform to ISO 649. (x,000 PSI) AD A4OEG4M BSPP Female Elbow BSPP-ORR / BSPP S I D I S (x,000 PSI) PART # BSPP BSPP -A4OEG4M G /8 A G /8 A * Male and female thread lengths have been shortened for compact design. The lengths do not conform to ISO 79 / DIN G5G5JAO Straight Thread Branch Tee SAE-ORB (all three ends) M N Typ. 3 * Y Across Wrench Flats Y* PART # UN/UNF-B UN/UNF-B UN/UNF-A 4 G5G5JAO 7/6-0 7/6-0 7/ / G5G5JAO 9/6-8 9/6-8 9/ / G5G5JAO 3/4-6 3/4-6 3/ / G5G5JAO 7/8-4 7/8-4 7/ /6 4.5 G5G5JAO /6- /6- / / G5G5JAO 5/6-5/6-5/ / M N Y (x,000 PSI) G7 Parker Hannifin orporation olumbus, Ohio

18 4300 atalog Pipe Fittings and Port Adapters AOG5JG5 Straight Thread Run Tee SAE-ORB (all three ends) M Y* N Typ. 3 * Y Across Wrench Flats PART # UN/UNF-A UN/UNF-B UN/UNF-B 4 AOG5JG5 7/6-0 7/6-0 7/ / AOG5JG5 9/6-8 9/6-8 9/ / AOG5JG5 3/4-6 3/4-6 3/ / AOG5JG5 7/8-4 7/8-4 7/ /6 4.5 AOG5JG5 /6- /6- / / AOG5JG5 5/6-5/6-5/ / M N Y (x,000 PSI) AD G5G5JG5 Female Straight Thread Tee SAE-ORB (all three ends) N Y* Typ. RRS Male Pipe Tee NPTF (all three ends) Y* N Typ. 3 * Y Across Wrench Flats SAE *Y Across Wrench Flats - 3 N Y (x,000 PSI) PART # UN/UNF-B 4 G5G5JG5 7/ / G5G5JG5 9/ / G5G5JG5 3/ / G5G5JG5 7/8-4.8 /6 4.5 G5G5JG5 / / G5G5JG5 5/6-.5 5/8 3.0 END SIZE - 3 NPTF N Y (x,000 PSI) PART # /8 RRS / / /4 RRS / / /8 RRS 3/8-8. 3/ / RRS / / /4 RRS 3/ / MMS Male Branch Tee NPTF (all three ends) N Y* N MRO Male Run Tee NPTF (all three ends) N Typ. Y* N SAE 4045 HPD Base # T 3 *Y Across Wrench Flats SAE 4044 HPD Base # 0T 3 * Y Across Wrench Flats END SIZE - 3 NPTF N N Y (x,000 PSI) PART # /8 MMS / / /4 MMS / / /8 MMS 3/ / / MMS / / /4 MMS 3/ / MMS - / / N N Y (x,000 PSI) PART # NPTF /8 MRO / / /4 MRO / / /8 MRO 3/ / / MRO / / /4 MRO 3/ / MRO - / /8.8.8 /4 MRO /4- / /8.5.5 / MRO /- / /.5.5 G8 Parker Hannifin orporation olumbus, Ohio

19 4300 atalog Pipe Fittings and Port Adapters MMO Female Pipe Tee NPTF (all three ends) SAE HPD Base # 0T Y* N Typ. 3 *Y Across Wrench Flats MMO444 Female BSPP Tee BSPP (all three ends) N 3 Y - 3 N Y (x,000 PSI) PART # NPTF /8 MMO / / /4 MMO / / /8 MMO 3/ / / MMO /-4.3 / /4 MMO 3/ / MMO - /.63 5/ /4 MMO /4- /.70 7/8.5.5 / MMO /- /.08 /.5.5 END SIZE - 3 BSPP N Y PART # /4MMO444M / /8MMO444M 3/ /MMO444M / /4MMO444M 3/ MMO444M (x,000 PSI) AD KMMOO Y* Female Pipe ross NPTF (all four ends) SAE HPD Base # 0X 3 N Typ. 4 *Y Across Wrench Flats P5ON Hex Head Plug SAE-ORB SAE 09009A HPD Base # 05P I 4 END SIZE -4 NPTF N Y (x,000 PSI) PART # /8 KMMOO / / /4 KMMOO / / /8 KMMOO 3/ / / KMMOO /-4.3 / /4 KMMOO 3/ /6 3.0 KMMOO - /.63 5/8.8 4 I (x,000 PSI) PART # UN/UNF-A P5ON 5/6-4 7/ P5ON 3/8-4 / P5ON 7/6-0 9/ P5ON /-0 5/ P5ON 9/6-8 / P5ON 3/4-6 7/ P5ON 7/ P5ON /6- / P5ON 3/6-3/ P5ON 5/6- / P5ON 5/8-7/ P5ON 7/8- / P5ON /- 3/ G9 Parker Hannifin orporation olumbus, Ohio

20 4300 atalog Pipe Fittings and Port Adapters HP5ON Hollow Hex Plug SAE-ORB I X HP Hex Head Pipe Plug NPTF SAE 09009B HPD Base # 05HP 5 Hex 5 Across Internal Hex Flats SAE 3009E HPD Base # 0P 5 I X DIA. (x,000 PSI) PART # UN/UNF-A HP5ON 5/6-4 / HP5ON 3/8-4 / HP5ON 7/6-0 3/ HP5ON /-0 3/ HP5ON 9/6-8 / HP5ON 3/4-6 5/ HP5ON 7/8-4 3/ HP5ON /6-9/ HP5ON 3/6-9/ HP5ON 5/6-5/ HP5ON 5/8-3/ HP5ON 7/8-3/ (x,000 PSI) PART # NPTF /8 HP /8-7 7/ /4 HP /4-8 9/ /8 HP 3/8-8 / / HP /-4 7/ /4 HP 3/4-4 / HP - / 5/ /4 HP /4- / 3/ / HP /- / HP - / / AD SHP Square Head Plug NPTF HHP Hollow Hex Pipe Plug NPTF SAE 3009N HPD Base # 0HP B 5 Hex 5 Across Internal Hex Flats END SIZE NPTF SQUARE PART # /8 SHP /8-7 9/ /4 SHP /4-8 3/ /8 SHP 3/8-8 7/ / SHP /-4 9/ /4 SHP 3/4-4 5/ SHP - / 3/ (x,000 PSI) 5 INTERNA (x,000 PSI) B PART # NPTF /6 HHP / /3 6.0 /8 HHP / / /4 HHP / / /8 HHP 3/ / / HHP / / /4 HHP 3/ / HHP - / / /4 HHP /4- / /4 5.0 / HHP /- / /4 3.0 G0 Parker Hannifin orporation olumbus, Ohio

21 4300 atalog Pipe Fittings and Port Adapters HP Hex Pipe ap NPTF P87OMN ISO 649 Hex Head Plug ISO 649 (for ISO 649- Port) SAE J44-4* 6M009A 4 S (x,000 PSI) PART # NPTF /8 HP /8-7 9/ /4 HP /4-8 3/ /8 HP 3/8-8 7/ / HP /-4 / /4 HP 3/4-4 / HP - / 5/ / HP /- / 3/ S (x,000 PSI) PART # Metric Thd. M8P87OMN M8X M0P87OMN M0X MP87OMN MX M4P87OMN M4X M6P87OMN M6X M8P87OMN M8X M0P87OMN M0X MP87OMN MX M7P87OMN M7X M30P87OMN M30X M33P87OMN M33X M4P87OMN M4X M48P87OMN M48X M60P87OMN M60X * SAE J44-4 and ISO are draft standards. AD VSTI M-OR ISO 649 Hollow Hex Plug ISO 649 (for ISO 649- Port) SAE J44-4* 6M009B O-ring seal* S6 D VSTI M-ED Metric Hollow Hex Plug Metric-ED (for ISO / DIN 385- Port) EOlastic Seal* S6 D D S6 (x,000 PSI) PART # Metric Thd. A3 7 MS VSTI0XOR M0 x VSTIX.5OR M x VSTI4X.5OR M4 x VSTI6X.5OR M6 x VSTI8X.5OR M8 x VSTIX.5OR M x VSTI7XOR M7 x VSTI33XOR M33 x VSTI4XOR M4 x D S6 (x,000 PSI) PART # Metric Thd. A3 7 MS VSTI0XED M0 x VSTIX.5ED M x VSTI4X.5ED M4 x VSTI6X.5ED M6 x VSTI8X.5ED M8 x VSTI0X.5ED M0 x VSTIX.5ED M x VSTI6X.5ED M6 x VSTI7XED M7 x VSTI33XED M33 x VSTI4XED M4 x VSTI48XED M48 x G Parker Hannifin orporation olumbus, Ohio

22 4300 atalog Pipe Fittings and Port Adapters VSTI R-ED BSPP Hollow Hex Plug BSPP-ED (for ISO 79- / DIN 385- Port) END SIZE BSPP D S6 S6 D EOlastic Seal* (x,000 PSI) PART # VSTI/8ED G /8 A VSTI/4ED G /4 A VSTI3/8ED G 3/8 A VSTI/ED G / A VSTI3/4ED G 3/4 A VSTIED G A VSTI /4ED G /4 A VSTI /ED G / A A3 7 MS P47OMN Hex Head Plug BSPP-ORB END SIZE BSPP H PART # 4P47OMN / P47OMN 3/ P47OMN / P47OMN 3/ P47OMN (x,000 PSI) H AD HP3M Hex Head Pipe Plug BSPT END SIZE BSPT PART # /8 HP3M / /4 HP3M / /8 HP3M 3/ / HP3M / /4 HP3M 3/ HP3M (x,000 PSI) G Parker Hannifin orporation olumbus, Ohio