Hydraulic Quick Couplings General Purpose

Size: px
Start display at page:

Download "Hydraulic Quick Couplings General Purpose"

Transcription

1 Manual Sleeve, Unvalved Snap-tite H Series couplings have been proven by years of use on hydraulic applications. H Series is best suited for general purpose fluid applications where either single or double shut-off valving is desired. A wide range of sizes, materials and end configurations are available. Applications include: Industrial hydraulic lines Water and coolant lines Mobile equipment PH version couplers and nipples are valved with a connectunder-pressure feature. These steel couplers and nipples allow connection with H Series valved couplers and nipples when there is a residual pressure on the PH coupler/nipple side. It is recommended that only one half of the connection (coupler or nipple) be PH version, not both. Features: s / - Available in steel, brass, aluminum and stainless steel Standard seal material is nitrile with other options available Optional sleeve lock helps to prevent accidental disconnection Double-shut-off version has low pressure drop Manually operated sleeve provides secure connection Two -Piece Construction Postive Ball-Lock Design Ball Bearing Sleeve Lock O-Ring and Back-Up Jet Stream Valve Design Hardened Sleeve Localized Induction Hardened Land Poppet Has Metal-to-Metal Stop H Series Version Poppet Valve Non-Shift Valve Wide Choice of End-Fittings PH Series Version Connect Under Pressure Poppet Valve H & PH Series Working Pressures (psi) Valved on both coupler and nipple (Double Shut-off) Valved on one half and Unvalved/Plain on other half (Single Shut-off) / /8 / / -/ -/ -/ Steel Brass Stainless Steel Unvalved/Plain on both coupler and nipple (Straight Through) Steel Brass Stainless Steel NOTE: Pressure ratings were established under static pressure conditions. Therefore, pressure ratings for any given flow, pressure surge and/or vibration may vary from these ratings. Burst pressures listed were taken at the point at which failure rendered the quick disconnect inoperative. (Proof pressure equals -/ times the working pressure; burst pressure equals times working pressure.) B- Parker Hannifin Corporation

2 Hydraulic Quick Couplings Manual Sleeve, Unvalved Performance PH Series Flow Rate (LPM) H Series Valved and Valved (Double Shut-Off) Valved and Valved (Double Shut-Off) Flow Rate (LPM) Pressure Loss (PSI) /8" /" /" " Pressure Loss (bar) Pressure Loss (PSI) /" /8" /" /" " -/" -/" " Pressure Loss (bar) FLOW RATE Flow Rate (GPM) (MIL-H-08 F ± F) FLOW RATE (GPM) 0 0 Flow Rate (GPM) (MIL-H-08 F ± F) Repair Kits S V H C - SPK.9... Valved and Plain (Single Shut-off) Flow Rate (LPM) Seals: Blank = Nitrile (Code A) V = Fluorocarbon E = Ethylene Propylene Spare s/repair Kits Coupling : = /8" 8 = /" = /" = " Coupling Half: C = Coupler N = Nipple Series: H = Poppet valve or plain/unvalved PH = Poppet valve with pressure relief feature Type: V = Valved Material: Blank = Steel, clear trivalent plating A =, clear anodized B = Brass S = Stainless Steel Pressure Loss (PSI) /" /8" /" 9 0 /" " /" FLOW RATE (GPM) -/" 0 0 Flow Rate (GPM) (MIL-H-08 F ± F) " Pressure Loss (bar) Repair kits include valve spring, valve stop and valve. O-ring installed on /8 to. / unit is non-field repairable. Note: Not all configurations are standard product offering. Contact QCD for price and delivery. B- Parker Hannifin Corporation

3 Manual Sleeve, Unvalved Valve Options Valve Styles: Connection Types: H Series Hydraulic Coupler/Nipple Poppet Valve Unvalved/Plain Double Shut-off Single Shut-off Straight Through/Unvalved s: /8 - /8 - Materials: Ordering Guide Steel Stainless Steel Brass S V H C - F PH Series Hydraulic Coupler/Nipple Connect-Under-Pressure Poppet Valve Double Shut-off (connects with valved H Series Coupler or Nipple) Steel Sleeve Lock Option: SL = Helps to prevent accidental disconnection Seals: Blank = Nitrile (Code A) JF = Military variation of Nitrile for hydrocarbon fuels M = Military variation of Nitrile for MIL-H-0 fluids V = Fluorocarbon E = Ethylene Propylene End Fitting Type: M = Male NPT F = Female NPTF EF = Female SAE EM = Male SAE Flare EB = Bulkhead SAE RP = Female British Parallel BS9 End Fitting : = /8" 0 = -/" = /" = -/" = /8" = " 8 = /" 0 = -/" = /" 8 = " = " = " Coupling : = /" = -/" = /8" = " 8 = /" 0 = -/" = /" 8 = " = " = " 0 = -/" Coupling Half: C = Coupler N = Nipple Series: H = Poppet valve or plain/unvalved PH = Poppet valve with pressure relief feature Type: V = Valved P = Plain (without valve) Material: Blank = Steel, clear trivalent plating A =, clear anodized B = Brass S = Stainless Steel Replacement Coupler Interface Seals Replacement Valve Seals Nitrile Nitrile Fluorocarbon Fluorocarbon / H--9 H--9V /8 H--9 H--9V / H8--9 H8--9V / H--9 H--9V H--9 H--9V -/ H0--9 H0--9V Ethylene Propylene -/ H0-A H0-V H0-E -/ H-A H-V H-E H-A H-V H-E 9 = MS9 Female = MS Male Flare = MS Bulkhead = MS Male = MS Bulkhead PH Valve option recommended on one side, not both. Available in steel only. For sizes up to NPTF threads in steel. For sizes up to NPSF threads in stainless steel. For sizes over NPT threads. Note: Not all configurations are standard product offering. Contact QCD for price and delivery. B- Parker Hannifin Corporation

4 Manual Sleeve, Unvalved H Series Couplers (, Brass, Steel) - Female Thread Brass Steel Length (in) / - - VHC-F Valved /8- NPTF / APHC-F BPHC-F PHC-F /-8 NPTF / AVHC-F BVHC-F VHC-F Valved /-8 NPTF / - - VHC-EF Valved /-0 UNF /8 APHC-F BPHC-F PHC-F /8-8 NPTF /8 AVHC-F BVHC-F VHC-F Valved /8-8 NPTF /8 - - VHC-EF Valved 9/-8 UNF / - BPHC8-8F PHC8-8F /- NPTF..9.9 / AVHC8-8F BVHC8-8F VHC8-8F Valved /- NPTF / - - VHC8-8EF Valved /- UNF / - BPHC-F PHC-F /- NPTF.9..0 / - BVHC-F VHC-F Valved /- NPTF...0 / - - VHC-EFV Valved -/ - UNF BPHC-F PHC-F - -/ NPTF BVHC-F VHC-F Valved - -/ NPTF VHC-EF Valved -/ - UNF / - BPHC0-0F PHC0-0F -/ - -/ NPT / - BVHC0-0F VHC0-0F Valved -/ - -/ NPT / - BPHC-F PHC-F -/ - -/ NPT / - BVHC-F VHC-F Valved -/ - -/ NPT BPHC-F PHC-F - -/ NPT BVHC-F VHC-F Valved - -/ NPT.9.. B- Parker Hannifin Corporation

5 Manual Sleeve, Unvalved H Series Couplers ( Stainless Steel) - Female Thread Stainless Steel / SVHC-F Valved /8- NPSF* / SPHC-F /-8 NPSF* / SVHC-F Valved /-8 NPSF* /8 SPHC-F /8-8 NPSF* /8 SVHC-F Valved /8-8 NPSF* / SPHC8-8F /- NPSF*..9.9 / SVHC8-8F Valved /- NPSF* / SPHC-F /- NPSF*.9..0 / SVHC-F Valved /- NPSF*...0 SPHC-F - -/ NPSF* SVHC-F Valved - -/ NPSF* / SPHC0-0F -/ - -/ NPT / SVHC0-0F Valved -/ - -/ NPT / SPHC-F -/ - -/ NPT / SVHC-F Valved -/ - -/ NPT..8. SPHC-F - -/ NPT.8.. SVHC-F Valved - -/ NPT.9.. *NPSF thread may be substituted with equivalent NPT thread H Series Couplers (, Brass, Steel) - Male Thread Brass Steel Length (in) / - - VHC-M Valved /8- NPT / AVHC-M BVHC-M VHC-M Valved /-8 NPT /8 AVHC-M - VHC-M Valved /8-8 NPT /8 - BVHC-M - Valved /8-8 NPT / - BVHC8-8M - Valved /- NPT..9.9 / - - VHC8-8M Valved /- NPT..9.9 / - BVHC-M VHC-M Valved /- NPT BVHC-M VHC-M Valved --/ NPT VHC-M Valved --/ NPT... B-8 Parker Hannifin Corporation

6 Manual Sleeve, Unvalved H Series Couplers ( Stainless Steel) - Male Thread / SVHC-M Valved /-8 NPT /8 SVHC-M Valved /8-8 NPT / SVHC8-8M Valved /- NPT..9.9 / SVHC-M Valved /- NPT SVHC-M Valved - -/ NPT...88 H Series Couplers (Steel) - Male SAE Degree Flare / VHC-EM Valved /-0 UNF /8 VHC-EM Valved 9/-8 UNF / VHC8-8EM Valved /- UNF..9.9 / VHC-EM Valved -/ - UNF.0..0 PH Series Connect-Under-Pressure Couplers (Steel) - Female Thread /8 VPHC-F Valved /8-8 NPTF / VPHC8-8F Valved /- NPTF / VPHC-EF Valved -/ - UNF.9..0 / VPHC-F Valved /- NPTF...0 B-9 Parker Hannifin Corporation

7 Manual Sleeve, Unvalved H Series Nipples (, Brass, Steel) - Female Thread Brass Steel Length (in) / - BPHN-F PHN-F /8- NPTF / - - VHN-F Valved /8- NPTF / APHN-F BPHN-F - /-8 NPTF / AVHN-F BVHN-F - Valved /-8 NPTF / - - PHN-F Valved /-8 NPTF / - - VHN-F Valved /-8 NPTF /8 APHN-F BPHN- - /8-8 NPTF /8 - - PHN-F /8-8 NPTF /8 AVHN-F BVHN-F VHN-F Valved /8-8 NPTF / AVHN8-8F - - Valved /- NPTF / - BPHN8-8F PHN8-8F /- NPTF...00 / - BVHN8-8F VHN8-8F Valved /- NPTF / - - VHN8-8EF Valved /- UNF / - BPHN-F PHN-F /- NPTF.9..9 / - BVHN-F VHN-F Valved /- NPTF.9..0 / - - VHN-EF Valved -/ - UNF BPHN-F PHN-F - -/ NPTF BVHN-F VHN-F Valved - -/ NPTF VHN-EF Valved -/ - UNF / - BPHN0-0F PHN0-0F -/ - -/ NPTF / - BVHN0-0F VHN0-0F Valved -/ - -/ NPTF / - BPHN-F PHN-F -/ - -/ NPTF... -/ - BVHN-F VHN-F Valved -/ - -/ NPTF BPHN-F PHN-F - -/ NPTF BVHN-F VHN-F Valved - -/ NPTF... B-0 Parker Hannifin Corporation

8 Manual Sleeve, Unvalved H Series Nipples ( Stainless Steel) - Female Thread / SPHN-F /8- NPSF* / SVHN-F Valved /8- NPSF* / SPHN-F /-8 NPSF* / SVHN-F Valved /-8 NPSF* /8 SPHN-F /8-8 NPSF* /8 SVHN-F Valved /8-8 NPSF* / SPHN8-8F /- NPSF*...00 / SVHN8-8F Valved /- NPSF* / SPHN-F /- NPSF*.9..9 / SVHN-F Valved /- NPSF*.9..0 SPHN-F - -/ NPSF*.0..0 SVHN-F Valved - -/ NPSF* / SPHN0-0F -/ - -/ NPTF / SVHN0-0F Valved -/ - -/ NPTF / SPHN-F -/ - -/ NPTF... -/ SVHN-F Valved -/ - -/ NPTF..8. SPHN-F - -/ NPTF.0.8. SVHN-F Valved - -/ NPTF... *NPSF thread may be substituted with equivalent NPT thread B- Parker Hannifin Corporation

9 Manual Sleeve, Unvalved H Series Nipples (, Brass, Steel) - Male Thread Brass Steel Length (in) / - BPHN-M - /8- NPT / - - PHN-M /8- NPT / - - VHN-M Valved /8- NPT / APHN-M BPHN-M PHN-M /-8 NPT / AVHN-M BVHN-M VHN-M Valved /-8 NPT /8 - BPHN-M PHN-M /8-8 NPT /8 AVHN-M BVHN-M VHN-M Valved /8-8 NPT / - BPHN8-8M PHN8-8M /- NPT / - BVHN8-8M VHN8-8M Valved /- NPT..9.9 / - BPHN-M PHN-M /- NPT...0 / - BVHN-M VHN-M Valved /- NPT BPHN-M - - -/ NPT PHN-M --/ NPT BVHN-M VHN-M Valved - -/ NPT / - - VHN0-0M Valved -/ - -/ NPT PHN-M - -/ NPT H Series Nipples ( Stainless Steel) - Male Thread / SPHN-M /8- NPT / SPHN-M /-8 NPT / SVHN-M Valved /-8 NPT /8 SPHN-M /8-8 NPT /8 SVHN-M Valved /8-8 NPT / SPHN8-8M /- NPT / SVHN8-8M Valved /- NPT..9.9 / SVHN-M Valved /- NPT...0 SVHN-M Valved - -/ NPT / SVHN0-0M Valved -/ - -/ NPT...00 B- Parker Hannifin Corporation

10 Manual Sleeve, Unvalved H Series Nipples (Steel) - Male SAE Degree Flare / VHN-EM Valved /-0 UNF /8 VHN-EM Valved 9/-8 UNF / VHN8-8EM Valved /- UNF..9.9 / VHN-EM Valved -/ - UNF.9..0 PH Series Connect-Under-Pressure Nipples (Steel) / VPHN8-8F Valved /- NPTF (Female) / VPHN8-8EM Valved /- UNF (Male)..9.9 H Series Dust Plugs and Caps Coupler Dust Plug Plastic Coupler Dust Plug Nipple Dust Cap Plastic Nipple Dust Cap Nipple Pressure Cap / PDP- AMPH- PDC- ADCH- MCH- /8 PDP- AMPH- PDC- ADCH- MCH- / PDP-8 AMPH-8 PDC-8 ADCH-8 MCH-8 / PDP- AMPH- PDC- ADCH- MCH- PDP- AMPH- PDC- ADCH- MCH- -/ - AMPH-0 - ADCH-0 MCH-0 -/ - AMPH- - ADCH- MCH- - AMPH- - ADCH- MCH- -/ - AMPH-0 - ADCH-0 MCH-0 - AMPH-8 - ADCH-8 MCH-8 B- Parker Hannifin Corporation

FF Series (Steel) ISO Interchange

FF Series (Steel) ISO Interchange Eaton s FF Series flat face is specifically designed for those applications where quick and easy connections and no-spill performance are essential. The FF Series is ideal for use when global interchangeability

More information

Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application. non-drip

Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application. non-drip Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application non-drip 2 Innovative Products for Demanding Applications Innovative Couplings for Fluid

More information

Non-Drip Quick Connect Couplings

Non-Drip Quick Connect Couplings Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application ^ Innovative Products for Demanding Applications Innovative Couplings for Fluid Applications

More information

QUICK COUPLINGS. Industrial Interchange. Automotive Interchange. Lincoln Interchange. Aro Interchange

QUICK COUPLINGS. Industrial Interchange. Automotive Interchange. Lincoln Interchange. Aro Interchange QUICK COUPLINGS For easy identification of popular pneumatic quick couplings use these actual size silhouettes Industrial Interchange Automotive Interchange Lincoln Interchange Aro Interchange 120 QUICK

More information

Quick Coupling Products

Quick Coupling Products Quick oupling Products Quick ouplings, Swivels, Valves, iagnostic Equipment atalog 3800 US February 2014 Quick oupling ivision Locations Grantsburg, WI hetek, WI Union ity, P FILURE OR IMPROPER SELETION

More information

PureFlow PEX Crimp Fittings Most widely recognized fitting system in North America

PureFlow PEX Crimp Fittings Most widely recognized fitting system in North America PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only

More information

Ring lock design prevents accidental disconnection To disconnect rotate sleeve 20 degrees. Standard body material: Zinc trivalent plated steel

Ring lock design prevents accidental disconnection To disconnect rotate sleeve 20 degrees. Standard body material: Zinc trivalent plated steel 2RL/3RL Series Eaton s 2RL/3RL ring lock series quick disconnect pneumatic couplings have a unique interchange which Eaton designed for use with compressed air. Product Features High Flow capacity Push

More information

SPH / MA and MA2 components MCS / MA multi-connections. Technical data sheet

SPH / MA and MA2 components MCS / MA multi-connections. Technical data sheet SPH / MA and MA2 components MCS / MA multi-connections Technical data sheet SPH / MA and MA2 components for MCS / MA automatic multi-connections Nominal bore 04, 06, 08, 12, 15, 20, 25, 37, 50 and 75 mm

More information

Diagnostic Products. Diagnostics A Wise Investment. A Pneumatics. B Hydraulics. E Valves C Thermoplastics. F Diagnostic D Swivels.

Diagnostic Products. Diagnostics A Wise Investment. A Pneumatics. B Hydraulics. E Valves C Thermoplastics. F Diagnostic D Swivels. Diagnostics A Wise Investment When time is money In today s Lean environment there is more emphasis put on increased production and reduced downtime than ever before. You can t afford to have your equipment

More information

RD 100. Spare parts list. RD 100 s/n BES Construction Tools PC AB No

RD 100. Spare parts list. RD 100 s/n BES Construction Tools PC AB No RD 100 Spare parts list RD 100 s/n BES100496 2018 Construction Tools PC AB No. 9800153901 2018-10 General information This spare parts list applies to the following: Part number 8311030410 RD 100 Description

More information

QUICK RELEASE COUPLINGS

QUICK RELEASE COUPLINGS QUICK RELEASE COUPLINGS Cross Reference C.01 Catalogue C.3 ~ C13 Quick Release Couplings Interchange Chart PART NO Series Page Faster Parker Aeroquip Safeway DNP Ryco Stucci Hansen Tema QOV C.03 NV 4000

More information

Fuelling products Pressure fuelling nozzles HU4000 series hose end pressure refuelling coupling

Fuelling products Pressure fuelling nozzles HU4000 series hose end pressure refuelling coupling HU4000 series hose end pressure Proven Design Features Retained Safety in refuelling is of paramount importance. Meggitt's unique internal safety interlock utilises the poppet as an integral part of the

More information

RMI Temperature control

RMI Temperature control RMI Temperature control 7 nominal diameters... hot and cold water, glycol water and heat transfer fluid circuits temperature control on injection presses Safe and quick locking A large number of locking

More information

QUICK CONNECT TECHNOOGY www.rtctec.com Water Pneumatic Hydraulic Electrical Accessories 461.0 976 32 10 Compatible rtc 0.0 rtc 1.0 rtc 3.0 rtc 450.0 rtc 451.0 Temperature Range Nitrile (N) FPM (V) EPDM

More information

QUICK CONNECT TECHNOOGY www.rtctec.com Water Pneumatic Hydraulic Electrical Accessories 464.0 976 32 10 Compatible rtc 013 Nitto Kohki & & 40 Cejn 315 Rectus 13 Temperature Range Nitrile (N) FPM (V) EPDM

More information

QUICK CONNECT TECHNOOGY www.rtctec.com Water Pneumatic Hydraulic Electrical Accessories 460.0 976 32 10 Compatible Ind. Interchange 3/ rtc 0 Cejn 4 Parker 25F Rectus Foster 4404 AMFO C26 Hansen 440 Temperature

More information

Quick Coupling Products

Quick Coupling Products Quick Coupling Products Quick Couplings, Swivels, Valves, Diagnostic Equipment Catalog 3800 USA February 204 Locations Grantsburg, WI Chetek, WI Union City, PA FAILURE OR IMPROPER SELECTION OR IMPROPER

More information

Compression fittings Metric and inch

Compression fittings Metric and inch Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.

More information

SFC KOENIG Product Catalog

SFC KOENIG Product Catalog SFC KOENIG Product Catalog 8 2016 SFC KOENIG I www.sfckoenig.com The World s Leading Sealing & Flow Control Technology With over 3 billion parts installed and failure rates less than 1 part per million,

More information

QUICK CONNECT TECHNOOGY www.rtctec.com Water Pneumatic Hydraulic Electrical Accessories 40.0 97 24 32 10 Compatible Ind. Interchange 1/4 rtc 023 Cejn 310 Parker B23 Rectus 23 Foster 3003 AMFO C8 Hansen

More information

Standard oil drain plug

Standard oil drain plug PRODUCTS STANDARD OIL DRAIN PLUG STANDARD DRAIN SB Standard oil drain plug The Standard Drain is the original Femco oil drain plug, and was introduced in 1983 to change oil in a quick, clean and environmentally

More information

JOHN GUEST SPEEDFIT FITTINGS

JOHN GUEST SPEEDFIT FITTINGS G6300 JOHN GUEST SPEEDFIT FITTINGS Grey acetyl copolymer construction with nitrile o-rings. FDA approved materials on all wetted surfaces. Meet NSF International Standards 51 and 61. Part Cross Pipe PRICE

More information

QUICK CONNECT TECHNOOGY www.rtctec.com Water Pneumatic Hydraulic Electrical Accessories 41.0 97 24 32 10 Compatible rtc 170.0 rtc 171.0 rtc 173.0 rtc 450.0 rtc 451.0 Temperature Range Nitrile (N) FPM (V)

More information

37 Stainless Steel. A wide range of end configurations are suitable for many Hydraulic applications

37 Stainless Steel. A wide range of end configurations are suitable for many Hydraulic applications JIC Prochem manufactures and supplies an extensive range of JIC Fittings and Adaptors in all configurations. 37 Stainless Steel Fittings Prochem 37 JIC Fittings and Adaptors provide a straightforward,

More information

LCD 500,1500. Spare parts list. Handheld core drills. Valid from serial number Construction Tools PC AB No

LCD 500,1500. Spare parts list. Handheld core drills. Valid from serial number Construction Tools PC AB No LCD 500,1500 Spare parts list Handheld core drills LCD 500 LCD 500 LCD 1500 Valid from serial number BGF0006875 BGF0006875 BGF0006875 2015 Construction Tools PC AB No. 3392 5193 01 2015-06 General information

More information

Code Type I.D. (mm) O.D. (mm) Operating Pressure (PSI) Min. Burst Pressure (PSI)

Code Type I.D. (mm) O.D. (mm) Operating Pressure (PSI) Min. Burst Pressure (PSI) 411 Series Braided Teflon Hose Order by Phone +44 (0) 121 525 5800 Type 411 Teflon Smooth Bore Hose The exceptional resistance of Teflon to high temperatures, permeability, chemical attack, water absorption

More information

M7100 Pressure Transducer

M7100 Pressure Transducer Pressure Transducer Performance standard to on and off highway engines and vehicle OEMs Rugged for heavy equipment and outdoor use Designed specifically for high volume applications Stainless Steel wetted

More information

Service Items. Page 1. Our #: Description: Rags 1 roll (app. 500 paper towels) Our #: Description: 4L60E TCC orifice capsule

Service Items. Page 1. Our #: Description: Rags 1 roll (app. 500 paper towels) Our #: Description: 4L60E TCC orifice capsule Our #: 096-004 Description: 4L60E TCC orifice capsule Our #: 096-005 Description: Rags 1 roll (app. 500 paper towels) Our #: 096-007 Description: TH200 to TH350 changeover extension housing aviliable in

More information

Hydraulic Remote Controllers Build Program. Bulletin HY /US

Hydraulic Remote Controllers Build Program. Bulletin HY /US Hydraulic Remote Controllers Joysticks Stackables Foot Pedals PCL401 PCL402 PCL402 Bulletin HY14-1800/US Bulletin HY14-1800/US Contents Introduction... 3 PCL401 Joysticks... 4 PCL402 Stackables...4-5 PCL402

More information

ADAPTERS AND TUBE FITTINGS

ADAPTERS AND TUBE FITTINGS DPTERS INDEX Section Pages Hose 15-67 Fittings 68-180 dapters and Tube Fittings 181-228 DPTERS ND TUE FITTINGS Description Page dapters raze and weld to 37 flare 221 raze and weld to split flange 220 SPP

More information

Bottom Loading & Recirculation Adapters

Bottom Loading & Recirculation Adapters SM6958 March 2010 Aerospace Group Conveyance Systems Division Carter Brand Ground Fueling Equipment Applicable additional manuals: None Maintenance & Repair Manual Bottom Loading & Recirculation Adapters

More information

Timken Lubrication Delivery Systems. Friction management solutions SM to keep systems running smoothly

Timken Lubrication Delivery Systems. Friction management solutions SM to keep systems running smoothly Timken Lubrication Delivery Systems Friction management solutions SM to keep systems running smoothly G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication

More information

Flareless Bite Type Fittings

Flareless Bite Type Fittings Ferulok Flareless Bite Type Fittings Ferulok Flareless Bite Type Fittings 4300 atalog BU TU WLN HBU Nut Ferrules Bulkhead Locknut Union Nuts, Ferrules, Locknuts Straights 7 7 7 7 WBU F5BU FBU GBU TRBU

More information

Quick Fitting Type Check Valve. Check Valve. Release ring (polyacetal) Metalic body (nickel-plated brass) Elastic sleeve (nitrile rubber)

Quick Fitting Type Check Valve. Check Valve. Release ring (polyacetal) Metalic body (nickel-plated brass) Elastic sleeve (nitrile rubber) Features The heck Valve permits the air flow in one direction but checks the flow in the opposite direction, thus keeping the output pressure at a constant level. The heck Valve can keep the service pressure

More information

Standard Cartridge Valves 2/2 Way Series NG16 NG100

Standard Cartridge Valves 2/2 Way Series NG16 NG100 Standard Cartridge Valves Way Series NG NG Table of Contents Designation Symbol Page General Description and Operating Principle Specifications and Characteristic Parameters Typical Characteristic Curves

More information

Stäubli HPX non-spill range specially designed for high pressure pulsating or vibrating hydraulic lines.

Stäubli HPX non-spill range specially designed for high pressure pulsating or vibrating hydraulic lines. HPX Hydraulics Stäubli HPX non-spill range specially designed for high pressure pulsating or vibrating hydraulic lines. Non-spill, flush face design With non-spill flush faces, the HPX connector prevents

More information

Quick Release Couplings

Quick Release Couplings N Series Bowes/MacDonald Interchange Dualguide sleeve tabs will ensure smooth collar action during connection and disconnection Convenient PushTwist and Click connection provides a positive locking condition

More information

UNITED STATES MEXICO CANADA

UNITED STATES MEXICO CANADA www.legris.com Online catalog with technical information and training module to help you implement the right solution. Find technical data on your fitting and download a CAD in many different formats.

More information

brass compression fittings

brass compression fittings compression fittings principle of universal compression fittings The range is called universal as it offers the maximum number of direct fitting alternatives with the minimum number of components. Tube

More information

RMI multi-couplings. Temperature control

RMI multi-couplings. Temperature control RMI multi-couplings Temperature control Centralised s... Registered Community Design... for greater implementation speed A full range The multi-coupling range is composed of four main families corresponding

More information

pneumatic push-in fittings system LF 3000

pneumatic push-in fittings system LF 3000 pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329

More information

Test 12 Connection Thread S12,65 x 1,5. Test Coupling with Piston Valve. Fast Coupling for. Advantages. Working Pressure. Media.

Test 12 Connection Thread S12,65 x 1,5. Test Coupling with Piston Valve. Fast Coupling for. Advantages. Working Pressure. Media. Test 12 Connection Tread S12,65 x 1,5 Introduction SKK12 Test Coupling wit Piston Valve Test Coupling SKK12 Internal Piston Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast

More information

Viega PEX Manifold Plumbing Systems

Viega PEX Manifold Plumbing Systems Viega PureFlow ViegaPEX Tubing Viega PEX Manifold Plumbing Systems MANABLOC Mounting Straps Pair of mounting straps with screws Pre-drilled to mount on 16" center studs ViegaPEX tubing is rated at 100

More information

LH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio

LH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio Forward and reversible plate Hatz Electric start 0 mm Hatz Electric start 0 mm Bio Hatz Electric start mm Bio Valid from serial number 0000 0000 0000 Contents Contents General information.....................................................................................................................................

More information

LH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio

LH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio LH 00 Spare parts list Forward and reversible plate LH 00 Hatz Electric start 0 mm LH 00 Hatz Electric start 0 mm Bio LH 00 Hatz Electric start 0 mm LH 00 Hatz Electric start 0 mm Bio Valid from serial

More information

Timken Lubricant Delivery Systems. Friction management solutions to keep systems running smoothly

Timken Lubricant Delivery Systems. Friction management solutions to keep systems running smoothly Timken Lubricant Delivery Systems Friction management solutions to keep systems running smoothly SM G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication is

More information

HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0215

HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0215 HERZ STRÖMAX 7GM/GML/GR HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0 H Rp L SW L L Dimensions in mm

More information

Loader Directional Control Valve

Loader Directional Control Valve Engineering & Manufacturing Solutions Specifications: 10 gpm (38 lpm) Nominal Capacity Rated up to 4000 psi (275 bar) Port Sizes: - Inlet/Outlet #8 SAE - Work Ports #6 or #8 SAE Weighs 10.9 lbs. (4.9 kg)

More information

U7100 Pressure Transducer

U7100 Pressure Transducer Performance standard for on and off highway engine & vehicle OEMs Rugged for heavy equipment and outdoor use such as HVAC refrigeration systems Designed specifically for high volume applications Stainless

More information

Electrical Test voltage (Vrms) Service sea level at m M I II

Electrical Test voltage (Vrms) Service sea level at m M I II Applications Compact profile and high density connectors for all military and aeronautical purposes Standards MIL-C 38999 Series II - QPL approved NFC 93422 HE 309 VG 96912 series II PAN 6433-1 BS 9522

More information

D ISCONNECTS Q UICK. Autolok Quick Disconnects. Kamlok Quick Disconnects

D ISCONNECTS Q UICK. Autolok Quick Disconnects. Kamlok Quick Disconnects Q UICK D ISCONNECTS Autolok Quick Disconnects Kamlok Quick Disconnects Q UICK D ISCONNECTS OPW Engineered Systems offers a comprehensive line of quick disconnect products, including Autolok and the world

More information

RMI multi-couplings Temperature control

RMI multi-couplings Temperature control RMI multi-couplings Temperature control Centralised s... New models Even more efficient. Applications ew features to discover on pages N 6 and 7. Even better performance ptimum mechanical strength and

More information

Process Process 1126

Process Process 1126 20 20 1126 Real ENERGY SOLUTIONS Grundfos advert pages Enabling you to Pumps keep the world moving and are all around us. They currently consume 10% of global electricity but did you know that most are

More information

RMI and RMP multi-couplings for fast tool change on injection molding and die cast equipment

RMI and RMP multi-couplings for fast tool change on injection molding and die cast equipment RMI-RMP L100.05 us B RMI and RMP multi-couplings for fast tool change on injection molding and die cast equipment STÄUBLI CORPORTION P.O. BOX 189 - DUNCN - S.C. 29334 PHONE 864/433-1980 TOLL-FREE NUMBER

More information

4. Absorb System Shock: Swivel joints are not rigid and therefore capable of absorbing some hose shortening when the system is pressurized.

4. Absorb System Shock: Swivel joints are not rigid and therefore capable of absorbing some hose shortening when the system is pressurized. Swivel Joints Table of Contents Advantages of using Eaton Swivel Joints 2 Selection Criteria and Product Safety Considerations 3 FS6500 4 Features and Benefits 4 Performance Testing 4 Repair Kit 10 BD5500

More information

Kamlok Series. The World s Most Popular Cam and Groove Quick Disconnect

Kamlok Series. The World s Most Popular Cam and Groove Quick Disconnect Kamlok Series The World s Most Popular Cam and Groove Quick Disconnect OPW Engineered Systems Kamlok Quick Disconnects are the industry standard in cam and groove couplers for safety and ease of use. All

More information

SERVICE PARTS MANUAL

SERVICE PARTS MANUAL SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE

More information

How to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections

How to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Use a thread pitch gauge to determine the number

More information

FEATURES DESCRIPTION

FEATURES DESCRIPTION JUNCTION BOXES FEATURES Allows easy and safe device connections to the fieldbus (Fo u n d at i o n fieldbus TM, PROFIBUS) HART and even for standard instrumentation wiring 4-20 ma; Ideal for coupling sensors,

More information

Spare parts list. Forward and reversible plate MV Valid from serial number. MV 500 Hatz Electric start 850 mm

Spare parts list. Forward and reversible plate MV Valid from serial number. MV 500 Hatz Electric start 850 mm Spare parts list Forward and reversible plate MV 00 MV 00 Hatz Electric start 0 mm Valid from serial number BGF00000 www.cp.com MV 00 00 0 0 MV 00 Contents Contents General information...............................................................

More information

SCHEDULE 40 FLUSH JOINT FITTINGS

SCHEDULE 40 FLUSH JOINT FITTINGS 130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53

More information

Condition Monitoring for Predictive Maintenance SensoNODE Blue and SCOUT Mobile

Condition Monitoring for Predictive Maintenance SensoNODE Blue and SCOUT Mobile Condition Monitoring for Predictive Maintenance SensoNOE Blue and SCOUT Mobile Sensors, Software, and Accessories Catalog 3864 USA January 2016 Locations Grantsburg, WI Chetek, WI Union City, PA Sunnyvale,

More information

RMI multi-couplings Control

RMI multi-couplings Control RMI multi-couplings Control Centralised connections for greater implementation speed Centralised connection of control circuits Optimised time for changing moulds Streamlined connections. Efficient and

More information

SCHEDULE 40 FLUSH JOINT FITTINGS

SCHEDULE 40 FLUSH JOINT FITTINGS 130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53

More information

Pipe Swivels. The Fitting Authority

Pipe Swivels. The Fitting Authority Pipe Swivels The Fitting Authority 0507 007 007 3507 Straights 45 Elbows 307 307 507 5507 07 NPT / NPSM Swivel 90 Elbows 5607 NPT / NPSM Swivel Long Drop 07 077T NPSM Swivel / NPSM Swivel / NPSM Swivel

More information

Spare parts list. Forward and reversible plate MV 220, Valid from serial number. MV 245 Hatz Electric start

Spare parts list. Forward and reversible plate MV 220, Valid from serial number. MV 245 Hatz Electric start Spare parts list Forward and reversible plate MV 0, MV 0 Honda MV Hatz Electric start MV 0 Honda MV Hatz Electric start Valid from serial number 0000 0000 BGF000000 BGF000000 www.cp.com MV 0, 00 0 0c MV

More information

RL-H80 PARTS LIST # K

RL-H80 PARTS LIST # K RL-H80 PARTS LIST # 102837K USE THIS PARTS LIST FOR: Hoist Serial Number: 2733 to For older hoists use the following: Parts List No. 102837G for Serial Number 2485 to 2732 IF YOUR HOIST DOES NOT FALL WITHIN

More information

SUCTION FILTERS. PRESSURE (ISO :2002) Collapse, differential for the fi lter element (ISO 2941): 1 MPa (10 bar)

SUCTION FILTERS. PRESSURE (ISO :2002) Collapse, differential for the fi lter element (ISO 2941): 1 MPa (10 bar) COMPONENTS SUCTION ILTERS SD MATERIALS Cover & housing: Anodized aluminium alloy or 6&6 only: Cover: anodized aluminium alloy Housing: steel ypass valve: Polyammide Seals: NR Nitrile (KM on request fl

More information

R-JACK SOLUTION. Overview. Applications U S A

R-JACK SOLUTION. Overview. Applications U S A Overview In today s world of high-speed communications, Ethernet has become the platform for all voice, video and data services. R-JACK Ethernet Interconnect Solution, OCC s ruggedized family of RJ-45

More information

ACCESSORIES. Accessories for distance and position sensors Magnets for HLT 1000, HLT 2000, HNT Electrical accessories HLT

ACCESSORIES. Accessories for distance and position sensors Magnets for HLT 1000, HLT 2000, HNT Electrical accessories HLT Accessories ACCESSORIES Accessories to suit every sensor! Whether it's electrical connectors, mechanical adapters or the instrument mounting clamps, the wide range of products from HYDAC offers solutions

More information

3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide

3, 4, 6 & 8 Model H Series Alarm Check Valve Installation and Maintenance Guide ", ", " & " Model H Series Alarm Check Valve Installation and Maintenance Guide 077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE 99-- 00-2-0 FAX 99--92 www.globesprinkler.com JUNE C- BULLETIN A.C.V.I.M., REV.

More information

R-Jack Solution. Overview. Applications

R-Jack Solution. Overview. Applications Overview In today s world of high-speed communications, Ethernet has become the platform for all voice, video and data services. R-JACK Ethernet Interconnect Solution, OCC s ruggedized family of RJ-45

More information

VSG, VSL, VSKH and VSKV Two-line Metering Devices

VSG, VSL, VSKH and VSKV Two-line Metering Devices VSG-KR These high quality, galvanized steel metering devices are designed for high-pressure (up to 400 bar) two-line systems. They can also be used in low to medium-pressure systems. They are available

More information

Parts / Spares Reference Sheet

Parts / Spares Reference Sheet Parts / Spares Reference Sheet Graco GMAX 5900 GMAX II 5900/5900HD Standard Series GMAX II 5900/5900HD Standard Series 0 28 22 30 2 5 38 4 46 6 37 50 9 45 2 20 45 43 8 0 52 05 23 40 27 38 5 3 32 33a 33b

More information

Quality, Precision and Unbeatable Value!

Quality, Precision and Unbeatable Value! PUSH IN FITTINGS 31 RX Push In Fittings 1 High quality Push In Fittings in composite materials or all nickel plated brass. 100% leak tested during production, these fittings are suitable for both pneumatic

More information

Radiator Lockshield Valves ADN.. AEN..

Radiator Lockshield Valves ADN.. AEN.. 07 EN - Straight version ADN.. Angle version AEN.. ACVATIX TM Radiator Lockshield Valves ADN.. AEN.. for -pipe heating systems Valve bodies made of brass, mat nickel-plated DN 0, DN and DN 0 Integrated

More information

Subsea Valves.

Subsea Valves. Subsea Valves FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, Germany Tel.: + 00 Fax: + 00 FITOK, Inc. North Promenade lvd., Suite 0, Stafford, Texas, US Tel.: + 00 Fax:

More information

Inductive Cylinder Position Sensors

Inductive Cylinder Position Sensors Inductive Cylinder Position Sensors 4-Wire DC (NPN and PNP) 2-Wire AC/DC Weld immune 250, 000, and 3000 psi designs C-Series F-Series Rating (psi) Probe Diameter Inductive Cylinder Position Sensors Pepperl+Fuchs

More information

SPH/BA Motorsports. Clean-break couplings for high pressure circuits

SPH/BA Motorsports. Clean-break couplings for high pressure circuits SPH/BA Motorsports Clean-break couplings for high pressure circuits Choose SPH/BA couplings... Applications - shock absorbers, brake and hydraulic lines - lubrication and coolants Combine lightweight and

More information

Spare Parts List Hydraulic Hammer. HM 720 Eco (V)

Spare Parts List Hydraulic Hammer. HM 720 Eco (V) Spare Parts List Hydraulic Hammer HM 720 Eco (V) Pt. Id. No. 3361 8557 11 Valid from: 09/2003 GB Spare Parts List Hydraulic Hammers HM 720 Eco HM 720 Eco V E Atlas Copco Construction Tools GmbH Atlas

More information

Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group

Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability

More information

Spare parts list. Forward and reversible plate MV 305, Valid from serial number. MV 305 Honda 600 mm MV 320 Hatz 600 mm

Spare parts list. Forward and reversible plate MV 305, Valid from serial number. MV 305 Honda 600 mm MV 320 Hatz 600 mm Spare parts list Forward and reversible plate MV 0, 0 MV 0 Honda 00 mm MV 0 Hatz 00 mm MV 0 Honda 00 mm MV 0 Hatz 00 mm Valid from serial number 0000 0000 BGF000000 BGF000000 www.cp.com MV 0, 0 00 00 0c

More information

Tech Tubes & Fittings. An ISO 9001: 2008 Company

Tech Tubes & Fittings. An ISO 9001: 2008 Company Tech Tubes & Fittings An ISO 9001: 2008 Company The Company Tech Tubes & Fittings is a highly acclaimed manufacturer and exporter of products like Instrumentation/Tube Fittings, Pipe Fittings, Flanges

More information

I Katalog SC OEN ESEN_OE Prospekt SC ayer US 1.06 8/23/12 4:43 PM Full compatibility with most popular plug systems Plug form 1:1 Nominal Bore SC Series Standards Compatible with* Information Page 6mm

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves Series 59 Individual mounting Series inline 35 100 Ext. pilot port Accumulator EXH. Pilot valve Function plate From accumulator Pilot exhaust To accumulator

More information

SECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE

SECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE SECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE PART # DESCRIPTION PAGE MOUNTING KITS & TANKS 903U MOUNTING KIT WITH TANK 801-802 905U MOUNTING KIT WITHOUT TANK 803-804 902U MOUNTING KIT - CRADLE, BLOCKS &

More information

Cable Glands 757, BVE and 737 Series: Blanking Plugs, Adaptors and Reducers Increased Safety and Flameproof

Cable Glands 757, BVE and 737 Series: Blanking Plugs, Adaptors and Reducers Increased Safety and Flameproof 757 Series Blanking Plugs 737 Series Adaptors and Reducers BVE Series Plastic Blanking Plugs & Sealing Washers Compliance Data: 757 Series Blanking Plugs: ATEX IECEx CE Ex d IIC or Ex e II Ex td A21 IP

More information

FOR TUBE FITTINGS OR-910N OR-910NA 5/8" 7/8" ".097" 11/16".863".116" 318-A02-1C. STOCKED O-RINGS in SPECIAL COMPOUNDS

FOR TUBE FITTINGS OR-910N OR-910NA 5/8 7/8 .097 11/16.863.116 318-A02-1C. STOCKED O-RINGS in SPECIAL COMPOUNDS FOR TUBE FITTINGS O-Ring Seals - Nitrile / Neoprene oints toriques d'étanchéité nitrile / néoprène can supply the right NITRILE O-Ring to suit YOUR purpose. The Nitrile O-Rings listed below are made especially

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves Series 1300 Individual mounting Series sub-base plug-in 35 100 Pilot air accumulator Internal pilot supply check valve Moisture and dust seal Manual operator

More information

Section CH-1. Combo Hydraulics (K220/L90LS Valve) - Implement Pumps. T800 Parts Module CH Combo Hydraulics - Implement Pumps

Section CH-1. Combo Hydraulics (K220/L90LS Valve) - Implement Pumps. T800 Parts Module CH Combo Hydraulics - Implement Pumps Section CH-1 Combo Hydraulics (K220/L90LS Valve) - Implement Pumps T800 Parts Module CH-51220 Combo Hydraulics - Implement Pumps Last Updated - 06/01/2003 Combo Hydraulics - Implement Pumps Combo Hydraulics

More information

Lockshield valves Series 195UM - 196UM 1195UM UM

Lockshield valves Series 195UM - 196UM 1195UM UM Lockshield valves Series 9UM - 96UM 9UM - 96UM Main features - vailable in the following versions : ngle body, straight body, for iron, copper and polyethylene piping with / connection to radiator and

More information

Economizer Regulator Filter Upgrade

Economizer Regulator Filter Upgrade Overview Chart LNG has released a new and improved economizer regulator, and filtering system. The new economizer filter system is designed to enhance reliability, and offer lower operating costs. In 2012

More information

Hose Menders. We offer hose menders in a variety of materials to suit the products being conveyed. G20N NYLON HOSE MENDER

Hose Menders. We offer hose menders in a variety of materials to suit the products being conveyed. G20N NYLON HOSE MENDER Hose Menders We offer hose menders in a variety of materials to suit the products being conveyed. Hose PRICE EACH Pkg G0N NYLON HOSE MENDER Hose PRICE EACH Pkg G0S PLATED STEEL HOSE MENDER G0S-038 3 8"

More information

Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI

Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2-16; P=87 PSI Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,

More information

1COMPRESSION FITTINGS

1COMPRESSION FITTINGS SECTION 1COMPRESSION FITTINGS TECHNICAL INFORMATION Wade Couplings consistently produce cost effective, reliable leak-tight joints. All Wade couplings are specially designed for use with Wade nuts and

More information

COP 2560 Drifter Parts for Atlas Copco COP2560 No Crawler Drill Drfter Part Number Part Name Q'ty Unit Price Remarks

COP 2560 Drifter Parts for Atlas Copco COP2560 No Crawler Drill Drfter Part Number Part Name Q'ty Unit Price Remarks COP 2560 Drifter Parts for Atlas Copco COP2560 No Crawler Drill Drfter Part Number Part Name Q'ty Unit Price Remarks 2 COP 2560 3115 3456 80 CYLINDER COMPL. 1 INCL. POS 3,5-10,11,12 3 COP 2560 CYLINDER

More information

Electronic pressure sensors

Electronic pressure sensors Presentation, type XML P For control circuits Presentation Pressure transmitters XML P are characterised by their thin fi lm technology. The stainless steel pressure sensing capsule is directly welded

More information

STANDARD CARTRIDGE VALVES 2/2-WAY

STANDARD CARTRIDGE VALVES 2/2-WAY STNDRD CRTRIDGE VLVES -WY SERIES NG NG ulletin - DESIGNTION SYMOL PGE General Description and Operating Principle Specifications and Characteristic Parameters Typical Characteristic Curves - -way Cartridge

More information

STEEL PIPE NIPPLES G1616 STANDARD BLACK STEEL NIPPLES ITEMS HIGHLIGHTED

STEEL PIPE NIPPLES G1616 STANDARD BLACK STEEL NIPPLES ITEMS HIGHLIGHTED STEEL PIPE NIPPLES Pipe PRICE Part No. Size Length EACH G1616 STANDARD BLACK STEEL NIPPLES G1616-0XC 1 8" Close $ 2.00 G1616-0X1.5 1 8" 1 1 2" 2.20 G1616-0X2 1 8" 2" 2.30 G1616-0X2.5 1 8" 2 1 2" 2.50 G1616-0X3

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves Series 57 Individual mounting Series inline 35 To accumulator Sealed solenoid enclosure 100 200 Ext. pilot port Pilot valve Function plate From accumulator

More information