Type MIT. WEH - We Engineer Hightech. WEH Connector for pressure and vacuum testing DATA SHEET. on components with internal thread
|
|
- Clifton Lane
- 6 years ago
- Views:
Transcription
1 DT SHEET D-2011/09/ Date: 07/2014 Type MIT WEH for pressure and vacuum testing on components with internal thread WEH - We Engineer Hightech
2 Type MIT WEH for internal threads DT SHEET General DESCRIPTION Features Pressure-tight connections by hand-tightening Simple seal replacement Ergonomic design High-grade materials The WEH MIT Quick is especially designed for testing components with internal threads. Only hand-tighten the connector into the thread until the o-ring seal contacts the test piece. The MIT seals without wrenches, sealants or tape. NBR seals meet most industrial requirements. WEH MIT is available as a connector with media inlet, with or without a and as a plug. pplication Quick connector for pressure and vacuum testing on components with internal thread, e.g. fittings, fixtures, tubes, boilers, tanks, radiators, etc. TECHNICL DT Characteristic Basic version Example of use: Operating pressure PS Vacuum up to max. 345 bar Temperature range +5 C up to +80 C Leak rate 1 x 10-3 mbar x l/s Material Corrosion resistant stainless steel Sealing material NBR Other designs on request Construction of MIT (plug for internal thread): Movable piston Test piece Piston seal Front seal Test media Page 2 D-2011/09/
3 Type MIT WEH for internal threads DT SHEET Ordering ORDERING WEH MIT Quick approx. dimensions (mm) media inlet and media inlet B1 /F D1 B1 D1 L2 L2 L1 L1 L3 Inlet B1 D1 L1 L2 L3 /F 1 G1/8" G1/ G3/8 30.0* D1 4 G1/ G3/ L2 6 G G1 1/ L1 8 G1 1/2 69.5** G1 1/ * exception: D1 = 33.0 for M18x1.5 ** exception: D1 = 70.0 for body size 8 with Whitworth tube thread to DIN ISO acc. to DIN 3852 part 2, form X and Y Thread C C C G1/8" 345 bar 7.0 C C C G1/4" 345 bar 9.5 C C C G3/8" 276 bar 10.5 C C C G1/2" 276 bar 10.5 C C C G3/4" 276 bar 11.0 C C C G1" 276 bar 12.5 C C C G1 1/4" 276 bar 19.2 C C C G1 1/2" 210 bar 19.2 C C C G2" 172 bar 21.0 * : minimum thread length * D-2011/09/ Page 3
4 Type MIT WEH for internal threads DT SHEET Ordering BSPT (tapered Whitworth tube thread) - acc. to DIN 3852 part 2, form X and Y Thread C C C BSPT 1/8" 345 bar 7.0 C C C BSPT 1/4" 345 bar 9.5 C C C BSPT 3/8" 276 bar 10.5 C C C BSPT 1/2" 276 bar 10.5 C C C BSPT 3/4" 276 bar 11.0 C C C BSPT 1" 276 bar 12.5 * : minimum thread length * NPT thread (NSI/SME B ) - acc. to SE J476a Thread C C C NPT 1/8" 345 bar 7.0 C C C NPT 1/4" 345 bar 9.5 C C C NPT 3/8" 276 bar 10.5 C C C NPT 1/2" 276 bar 10.5 C C C NPT 3/4" 276 bar 11.0 C C C NPT 1" 276 bar 12.5 * : minimum thread length * SE-O-Ring Boss - acc. to SE J1926 / ISO Thread C C C UNF 3/8" bar 7.0 C C C UNF 7/16" bar 7.0 C C C UNF 1/2" bar 9.5 C C C UNF 9/16" bar 9.5 C C C UNF 3/4" bar 10.5 C C C UNF 7/8" bar 10.5 C C C UN 1 1/16" bar 11.0 C C C UN 1 5/16" bar 11.0 * : minimum thread length * Page 4 D-2011/09/
5 Type MIT WEH for internal threads DT SHEET Ordering Metric ISO thread to DIN 13 - acc. to DIN 3852 part 1, form X and Y Thread C C C M10x bar 7.0 C C C M10x bar 7.0 C C C M12x bar 7.0 C C C M12x bar 9.5 C C C M14x bar 9.5 C C C M16x bar 10.5 C C C M18x bar 10.5 C C C M20x bar 10.5 C C C M22x bar 10.5 C C C M24x bar 11.0 C C C M26x bar 11.0 * : minimum thread length * Other connector sizes and versions on request. Required information for ordering see page 9, catalogue no. 35. SPECIL SOLUTIONS Examples: MIT with extension MIT with 90 lateral port D-2011/09/ Page 5
6 Type MIT WEH for internal threads DT SHEET Other products OTHER PRODUCTS You will find more products in our current catalogue no. 35 Further information on our homepage Contacting For queries and further information, please do not hesitate to contact us. Manufacturer: WEH GmbH Precision s Josef-Henle-Str Illertissen / Germany Phone: Fax: sales@weh.com ll rights reserved, WEH GmbH ny unauthorized use is strictly forbidden. Subject to alteration. No liability will be assumed for any content. Herewith previous versions are no longer valid. Page 6 D-2011/09/
Pressure transmitter for mobile hydraulic applications With output signals CANopen and J1939
Electronic pressure measurement Pressure transmitter for mobile hydraulic applications With output signals CNopen and J1939 Model MHC-1 WIK data sheet PE 81.49 pplications Construction machinery gricultural
More informationTest 12 Connection Thread S12,65 x 1,5. Test Coupling with Piston Valve. Fast Coupling for. Advantages. Working Pressure. Media.
Test 12 Connection Tread S12,65 x 1,5 Introduction SKK12 Test Coupling wit Piston Valve Test Coupling SKK12 Internal Piston Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast
More informationLF3800 stainless steel push-to-connect fittings
3800 push-to-connect fittings principle of system 3800 push-to-connect fitting system The 3800 range provides the advantages of push-to-connect fittings instant connection and disconnection for a wider
More informationMPreC - Pressure Relief Device Order specification sheet
- Pressure Relief Device Order specification sheet -Series LARGE MESSKO PRESSURE RELIEF DEVICE Complete the Order-N o by choosing the specific add-on s: e.g.: LMPRD 685-08-22-N01-00 Order-N o : Parameter
More informationSPH / MA and MA2 components MCS / MA multi-connections. Technical data sheet
SPH / MA and MA2 components MCS / MA multi-connections Technical data sheet SPH / MA and MA2 components for MCS / MA automatic multi-connections Nominal bore 04, 06, 08, 12, 15, 20, 25, 37, 50 and 75 mm
More informationDCT 531. Industrial Pressure Transmitter with RS485 Modbus RTU. Stainless Steel Sensor
DCT 5 Industrial Pressure Transmitter with RS85 Modbus RTU Stainless Steel Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 00 mbar up to 0... 00 bar output
More informationpneumatic push-in fittings system LF 3000
pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
More informationAssembly instructions VOSS quick connect system 203 N
Assembly instructions VOSS quick connect system 203 N The optimized classic A. Important notices Please observe before using the quick connect system VOSS quick connect system 203 N is suitable for air
More informationBSP & HOSE Fittings M5, 1/8... 1
SP & HOS Fittings M5, 1/8... 1 Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All taper threads pre-coated with non-ptf based sealant Straight Adaptors
More informationQuality, Precision and Unbeatable Value!
PUSH IN FITTINGS 31 RX Push In Fittings 1 High quality Push In Fittings in composite materials or all nickel plated brass. 100% leak tested during production, these fittings are suitable for both pneumatic
More informationInch and Metric Flaring Tooling for 1025
Inch and Metric Flaring Tooling for 1025 Flaring Tools Parflange 1025 37 Flaring and Flanging Systems Parker s Parflange 1025 machine is designed to create 37 flared tube ends. For more detailed information
More informationP027 Series Pressure Transducer Installation & Operation Manual
trans metrics, Division of United Electric Controls P027 Series Pressure Transducer Installation & Operation Manual 5325 Naiman Parkway Solon, Ohio 44139 Phone: 440-248-2229 Fax: 440-248-7780 www.trans-metrics.com
More informationMiniaturised pressure sensor Model M-10, standard version Model M-11, version with flush diaphragm
Electronic pressure measurement Miniaturised pressure sensor Model M-10, standard version Model M-11, version with flush diaphragm WIKA data sheet PE 81.25 for further approvals see page 5 MicroTronic
More informationMALE THREAD SPECIFICATIONS
MALE THREAD SPECIFICATIONS PARALLEL MALE THREADS M20 Thread type BSP-m BSP-m BSP-m BSP-m Metric Seal method ISO 1179-4 ISO 1179-4 ISO 1179-4 ISO 1179-4 ISO 9974-3 Designation thread ISO 228-1 ISO 228-1
More informationInsertion Flowmeter for compressed air and gases DN50 - DN700 (2-28 )
The flow meter is based on the thermal mass flow measurement and is ideal for measuring the flow of compressed air and gases in pipes from DN50 (2 ) to DN700 (28 ). With the, the consumption of compressed
More informationGrease Guns PRELIxx and PRELIxx PRO
Grease Guns PRELIxx and PRELIxx PRO 2014.1 Quality that leads Different grease gun colors for different grease types 03 Grease Guns PRELIxx and PRELIxx Pro 2014.1 Contents Contents PRELIxx 2014.1 Technical
More informationCompressed Air Systems Pneumatic Fittings LLDPE Tube
John Guest Limited Horton Road, West Drayton, Middlesex UB7 8JL, England Tel: 01895 449233 Fax: 01895 420321. www.johnguest.com and are registered trademarks of John Guest International Limited Copyright
More information15 and 16 Series BSP and hose fittings
SP and hose fittings > > Port size: M5, 1/8... 1 > > xtensive range of shapes and sizes including manifolds > > High temperature and pressure copper sealing washers supplied with ISO threads Technical
More informationElectronic pressure switch with display Model PSD-4
Electronic pressure measurement Electronic pressure switch with display Model PSD-4 WIKA data sheet PE 81.86 Applications Machine tools Hydraulics and pneumatics Pumps and compressors Special-purpose machine
More informationEconomizer Regulator Filter Upgrade
Overview Chart LNG has released a new and improved economizer regulator, and filtering system. The new economizer filter system is designed to enhance reliability, and offer lower operating costs. In 2012
More informationSocket Head Cap Screw Metric
1 2 0 0 M2 WRENCH 1.mm 11 1 1 1 1 21 0 Pcs 1, 0 0 0 00 00 00 00 00 00 00 00 WRENCH 2mm 11 1 1 1 0 Pcs 0 0 0 00 00 00 00 00 WRENCH 2.mm 21 002 11 00 00 1 0 01 21 002 000 0 Pcs 1 0 2 0 00 00 00 00 00 00
More informationPA 152. Probe mounting adaptor (high temperature)
(high temperature) FEATURES» From the Vibro-Meter product line» For the external mounting of TQ proximity probes» Removable housing, with U-shaped retainer, that allows easier probe installation and gap
More informationbrass compression fittings
compression fittings principle of universal compression fittings The range is called universal as it offers the maximum number of direct fitting alternatives with the minimum number of components. Tube
More informationEasy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
More informationBaerCoil Thread Repair Kits
BaerCoil Thread Repair Kits www.baercoil.com Thread repair Besides thread reinforcement, the BaerCoil thread insert also enable the repair of damaged threads. Rejected parts can be saved while maintaining
More informationP30-2. Overview. Pressure Transmitter Datasheet. *High Quality* 3 Years Warranty. At a Glance. Function. Application
P30-2 Pressure Transmitter Datasheet At a Glance *High Quality* 3 Years Warranty Premium Pressure Transmitter for gauge and pressure measurement with 3 years warranty High repeatability and long-term stability
More informationInsertion RTD temperature probe
Data sheet 902350 Page 1/6 For temperatures between -50 and +260 C Steam-tight and pressure-resistant High mechanical strength For use in the food industry Available with multiple measuring points Due
More informationprecision pipe fittings
Precision Pipe Fittings 1 8 to 1 sizes 316 stainless steel, brass, and exotic materials NPT threads HOKE Inc. PO Box 4866 Spartanburg, SC 29305-4866 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com
More informationQ-Flow product information. Variable area flowmeters for gases and liquids
Q-Flow product information Variable area flowmeters for gases and liquids MyScale Air mm ALU Attractive design and price: Variable area flowmeters Q-Flow The proven variable area flowmeter with compact,
More informationPipe Fittings and Port Adapters
Pipe Fittings and Port Adapters The Fitting Authority 4300 atalog Pipe Fittings and Port Adapters F5OHAO SAE-ORB / SAE-ORB F5OF SAE-ORB / NPTF FF FFF ong FF33M BSPT / BSPT Nipples G7 G7 G7 G7 G8 G5HG5
More informationLS 6600 Technical Datasheet
Technical Datasheet Switch for level detection and dry-run protection Optimised sensor geometry, easy to clean Measures products with dielectric constant > 1.5 Small and compact KROHNE 06/2011-4001367301
More informationLevel Transmitter. Table of dimensions see page 4. Total length B Installation length A SW55 Ø 55 Ø 75
Level Transmitter Construction The GEMÜ level transmitter has an immersion tube with reed contacts and a chain of resistors which are triggered by a float with an integrated permanent magnet. A threaded
More informationPNEUMATICS FITTINGS See easy to make a connection on page Technical Specification shown on pages
PNEUMATICS FITTINGS Super Speedfit Push-in fittings have been specially designed for miniature pneumatics applications. They provide a fast and secure way of connecting tubes and offer considerable advantages
More informationOperating Instruction
Level and Pressure Operating Instruction VEGASWING 71 A Contents Contents Safety information... 2 1 Product description 1.1 Function and configuration... 3 1.2 Functional principle... 3 1.3 Technical data...
More informationPipe Fittings and Port Adapters
Pipe Fittings and Port Adapters Pipe Fittings and Port Adapters F The Fitting Authority atalog 4300 F5OHAO F5 FF FFF F8OHA8O SAE-ORB / SAE-ORB SAE-ORB / NPTF Long Metric-ORR / Metric-ORR Nipples F F F
More informationGeneral Characteristics DM 80 Series - JIS Metric Tube
General haracteristics DM 80 Series - JIS Metric Tube Introduction Fitting Material Specifications K = Stainless Steel G = arbon Steel = opper Nickel 70/30 = opper Nickel 90/10 D = Duplex Z = Super Duplex
More informationECHOMAX XPS-10 ULTRASONIC TRANSDUCER
Datasheet ECHOMX XPS-10 ULTRSONIC TRNSDUCER Supplied by.com Call us on + (0)118 916 920 Email info@27able.com Overview transducers use ultrasonic technology to measure level in a wide range of liquids
More informationMedium Pressure Filter Pi 3000
Medium Pressure Filter Pi 3000 Nominal pressure 0/315 bar (2850/44 psi), nominal size up to 400 according to DIN 24550 1. Features High performance filters for modern hydraulic systems Provided for pipe
More informationPipe fittings and flanges, sockets for bayonet locks
Data Sheet 909750 (909725) Page 1/7 Pipe fittings and flanges, sockets for bayonet locks for temperatures up to 600 C for different fitting lengths simple installation and replacement pressure-tight sealing
More informationTPM 80. Dew Point Transmitter. Manual. BA_TPM80_e // V1.0 // technical data are subject to change
TPM 80 Dew Point Transmitter Manual BA_TPM80_e // V1.0 // technical data are subject to change Pro air doesn t accept warranty and liability claims neither upon this publication nor in case of improper
More informationISO*STAR (SXE, SXP) 5/2 & 5/3 Solenoid and pilot actuated glandless spool valves
*STR (SX, SXP) / & / > > Sub-base mounted, 99- s, or > > Specially coated glandless spool and sleeve for long trouble-free life > > Integral flow regulators available on and s for cylinder speed control
More informationPipe Fittings and Port Adapters
Pipe Fittings and Port Adapters Pipe Fittings and Port Adapters F The Fitting Authority Pipe Fittings and Adapters - Order Today, SHIP TODAY at www.partsgopher.com Pipe Fittings and Port Adapters 4300
More informationOperating manual GTL 142 GTL 152. Temperature probe. Please keep the manual for future use.
Operating manual Temperature probe GTL 142 GTL 152 Please keep the manual for future use. L01.0.1X.6C-02 GREISINGER electronic GmbH Hans-Sachs-Str. 26 93128 Regenstauf Germany Fon +49(0)9402-9383-0 Fax
More informationDMP 333 DMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial
DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Industrial Pressure Transmitter DMP Nominal pressure
More informationMore Precision. eddyncdt // Eddy current sensors for displacement and position
More Precision eddyncdt // Eddy current sensors for displacement and position 18 High precision eddy current displacement measurement eddyncdt 00 - Micrometer accuracy - Ideal for fast measurements: Bandwidth
More informationCompression fittings Metric and inch
Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.
More informationStainless One-touch Fittings. Applicable Tubing. Tube material Tube O.D. Specifications. Thread Nut Sealant (Thread portion) Component Materials
Stainless One-touch Fittings Series KG Guide Collet Chuck Accepts nylon, soft nylon and polyurethane tubes. as large retaining force. Chuck certainly bites tube and collet increases retaining force. Release
More informationStandard Temperature Sensors for Industrial Use
Standard Temperature Sensors for Industrial Use Description of Temperature Sensors Design and fabrication of our industrial sensors correspond with the technical standard of DI 4770. Our sensors can be
More informationContinuous level measurement Ultrasonic transducers
Siemens G 2012 Level measurement Overview EchoMax XPS/XCT transducers use ultrasonic technology to measure level in a wide range of liquids and solids. Benefits Integral temperature compensation Low ringing
More informationSpiral Mill-Thread. Advantages of Spiral Mill-Thread Tools
Spiral Mill-Thread Advantages of Spiral Mill-Thread Tools The spiral designed tools enable a smooth cutting operation at a high feed rate and reduced machining time. The tools suit a wide range of applications,
More informationInstruction Manual DR58 Brass Paddle Wheel Flow Meter
Instruction Manual DR58 Brass Paddle Wheel Flow Meter PKP Prozessmesstechnik GmbH Borsigstraße 24 D-65205 Wiesbaden-Nordenstadt Tel.: ++49-(0)6122-7055-0 Fax: ++49-(0)6122-7055-50 Email: info@pkp.de Table
More informationButterfly Control Valve. DMK/6 Series
Butterfly Control Valve DMK/6 Series UL Listed for US and Canada UL 842 and ULc C125 & C842 File # MH 18741 Models DMK 707/6 (3/4 NPT) DMK 710/6 (1 NPT) DMK 712/6 (1 1/4 NPT) DMK 715/6 (1 1/2 NPT) DMK
More informationPSI COMPAKT SEAL PRESSURE TIGHT UP TO 5 BAR SPECIAL VERSIONS FOR DIFFERENT PIPE SYSTEMS STAINLESS STEEL PRESSURE PLATES AS STANDARD
PSI COMPAKT SEAL PRESSURE TIGHT UP TO 5 BAR SPECIAL VERSIONS FOR DIFFERENT PIPE SYSTEMS STAINLESS STEEL PRESSURE PLATES AS STANDARD ALL SPLIT VERSIONS OF OUR STANDARD COMPAKT SEALS ARE FOLDABLE WWW.PSI-PRODUCTS.COM
More informationContinuous level measurement Ultrasonic transducers
Siemens G 2012 Level Measurement Overview Echomax XPS/XCT transducers use ultrasonic technology to measure level in a wide range of liquids and solids. Benefits Integral temperature compensation Low ringing
More informationPressure Transmitters with IO-Link BSP-Bxxx-xx004-xxxS1A-xx, BSP-Vxxx-xx004-xxxS1A-xx
EU Directive 2004/108/EC (EMC Directive) and EMC Law Generic Standards: EN 61000-6-4 (Emissions), EN 61000-6-2 (Interference Immunity) Emissions testing: Radio interference emissions EN 55011 Group 1,
More informationElectronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm
Pressure Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm WIKA data sheet PE 81.67 Applications Machine tools Hydraulics and pneumatics Pumps and
More informationPneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/ tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
More informationSupplementary instructions. Plug connector ISO for level sensors. Document ID: 30380
Supplementary instructions Plug connector ISO 4400 for level sensors Document ID: 30380 Contents Contents For your safety. Appropriate use... 3.2 General safety instructions... 3.3 Safety instructions
More information21023, 21025, 2/2 Direct solenoid actuated poppet valves
03, 05, / > > Port size: G/4, G/ > > Working from 0 bar up > > Suitable for mediumhigh vacuum down to.33 0 - mbar l/s > > Compact design > > Valves and solenoids are ATEX approved. Additional international
More informationSupplementary instructions. Plug connector ISO for continuously measuring sensors. Document ID: 30375
Supplementary instructions Plug connector ISO 4400 for continuously measuring sensors Document ID: 30375 Contents Contents For your safety. Appropriate use... 3.2 Impermissible use... 3.3 General safety
More informationDRUCK & TEMPERATUR LEITENBERGER GMBH
DRUCK & TEMPERATUR LEITENBERGER GMBH Operating Manual Multi-Functional Pressure Gauge DS 200. General Please read the operating manual carefully prior to assembly and operation of the pressure gauge. The
More informationCatalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group
Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability
More informationM7100 Pressure Transducer
Pressure Transducer Performance standard to on and off highway engines and vehicle OEMs Rugged for heavy equipment and outdoor use Designed specifically for high volume applications Stainless Steel wetted
More informationElectrical Position Indicator
Distributed by: Tel: 90.77.9000 Toll Free:.800.8.78 www.tricanada.com Electrical Position Indicator with microswitches Construction The GEMÜ 0 electrical position indicator has one or two mechanical microswitches.
More informationPRESSURE RELIEF DEVICE ORDERING SPECIFICATIONS.
MESSKO MPreC PRESSURE RELIEF DEVICE ORDERING SPECIFICATIONS. MESSKO MPreC -Series LARGE MESSKO PRESSURE RELIEF DEVICE (LMPRD) Operating pressure Project/Reference: Gasket material MPreC Typ 4 psi; 0.28
More informationStandard oil drain plug
PRODUCTS STANDARD OIL DRAIN PLUG STANDARD DRAIN SB Standard oil drain plug The Standard Drain is the original Femco oil drain plug, and was introduced in 1983 to change oil in a quick, clean and environmentally
More information06/16 BBK. The economizer. factory when the A. Page 1 of 8. Procedure. using LNG. Safety-0001.
Overview The following Technical Service Bulletin gives the servicing technician detailed instructions to aid with replacing an economizer regulator on a Chart LNG vehicle fuel tank. Economizer Regulator
More informationAssembly. 1 Compact version with valve plug 2 Short tube version with cable 3 Compact version with M12 plug 4 Short tube version with M12 plug
Vibration Limit Switch Features Limit switch for liquids External function test with test magnet Onsite function check possible thanks to LED indication Large selection of process connections for hassle-free
More informationUNITED STATES MEXICO CANADA
www.legris.com Online catalog with technical information and training module to help you implement the right solution. Find technical data on your fitting and download a CAD in many different formats.
More informationAPM CPF Series. Advanced Pressure Module
APM CPF Series Advanced Pressure Module Expand Your Multi-Purpose Signal Calibrator Now Measure Pressure! THE CRYSTAL APM CPF SERIES pressure module, with integrated CPF female connection, offers the functionality
More informationM M. P ipe BRASS BRASS FITTINGS F G. Actual outside diameters of pipe threads. Actual Male Thread Profiles
RSS FITTINS Pipe RSS Lead Free Fittings see pages 166-175 For ronze & Larger Sizes see pages 208-215 For SPT/ SPP see pages 116-117 P ipe Size 1/16 1/ 8 1/ 4 3/ 8 1/ 2 3/ 4 1 T hread Size e 1/16-27 1/8-27
More informationScrew-in resistance thermometers with terminal head Form B
Data Sheet 90.2002 Page 1/7 s with terminal head Form B for temperatures from -50 to +600 C with replaceable measuring insert as single or twin resistance thermometer terminal head Form B, BUZ, BUZH, BBK
More informationRSK. Wafer Type Check Valve. Construction. Features. Advantages
Wafer Type Check Valve Construction The GEMÜ wafer type check valve is available in plastic or metal and the body, disc and seal can be chosen from various materials. The valve is clamped between two flanges
More informationLevel sensor Stainless steel version Model RLT-1000, for industrial applications
Level measurement Level sensor Stainless steel version Model RLT-1000, for industrial applications WIKA data sheet LM 50.02 Applications Level measurement of liquids in machine building Control and monitoring
More informationManual EE371. Dew Point Transmitter / Switch down to -60 C Td. BA_EE371_e // V2.0 // technical data are subject to change
Manual EE371 Dew Point Transmitter / Switch down to -60 C Td BA_EE371_e // V2.0 // technical data are subject to change E+E Elektronik Ges.m.b.H. doesn't accept warranty and liability claims neither upon
More informationYT-870 / 875 Series. Rotork YTC Limited VERSION 1.06
PRODUCT MANUAL Rotork YTC Limited VERSION 1.06 Contents 1 Introduction... 3 1.1 General Information for the users... 3 1.2 Manufacturer Warranty... 3 1.3 Explosion Proof Warning... 4 2 Product Description...
More information914L. Capacitive Level Transmitter. Features. 1 Datasheet 914L Capacitive level transmitter for liquids.
Capacitive Level Transmitter Features Capacitive level transmitter for liquids. Low maintenance, easy calibration and configuration. Easy installation directly into pressurized vessels. HART technology
More informationLevel and temperature switch Nivotemp NT-M, NT-MD
Level and temperature switch Nivotemp NT-M, NT-MD Fluidcontrol In hydraulics and lubrication technology the fill level of oil tanks needs to be monitored. Here, modern factory automation requires compatible
More informationSetting Standards. Cable Glands Cable Protection
Setting Standards Cable Glands Cable 2013 Setting Standards UMMEL 2 hummel.com your website! Online Catalog Product Pictures and Product Information Product and Assembly Videos Assembly and Operations
More informationwith extraction and return pipe
Float switch with extraction and return pipe 351 TEG + Intake and extraction pipes and reliable measurement + Long lifetime due to contact-free reed technology + No calibration necessary + Switching points
More informationThermowell for Screwing
Accessories - KC0126-2013/09 Thermowell for Screwing Nominal pressure PN160. Inner bore diameter 9 mm. WT70 C 01 Temperature cylindrical thermowell for screwing, PN160 V900 9 Z01 M20x1. 5 P02 M27x2 Code
More informationApplication The DA03 serves as indicator of differential. Follow mounting instructions in accordance to application.
DA03 Differential Pressure Gauge / Differential Pressure Gauge and Switch Models for Assignment in Explosion-hazardous Areas per Directive 94/9/EC (ATEX) Application The DA03 serves as indicator of differential
More informationOPTISWITCH 6600 C Technical Datasheet
Technical Datasheet Microwave Level Switch for standard hygienic applications Optimised sensor geometry, easy to clean Measures products with dielectric constant > 1.5 Small and compact KROHNE CONTENTS
More informationCable Glands Cable Protection
Cable Glands Cable 2 UMMEL hummel.com your website! Online Catalog Product Pictures and Product Information Product and Assembly Videos Assembly and Operations Manual Technical drawings 3D data Certificates
More informationPressure transmitter/pressure switch PASCAL CS
Pressure transmitter/pressure switch PASCAL CS for food/pharmaceutical/biotechnology,type series CS2110 Features Multifunctional pressure transmitter/pressure switch Hygienic case with no notches or indentations
More informationPressure transmitter for highest pressure applications Up to 217,500 psi (15,000 bar) Model HP-2
Electronic pressure measurement Pressure transmitter for highest pressure applications Up to 217,500 psi (15,000 bar) Model HP-2 WIKA data sheet PE 81.53 Applications Test bench construction Water jet
More informationLevel switch NS 10/NS 25..-AM
Level switch NS 10/NS 25..-AM Fluidcontrol Oil tanks in lubrication and oil supply systems are often under overpressure compared to the ambient atmosphere. All oil moistened parts of devices mounted externally
More informationDigital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process control valves Type 8696 can be combined with Digital smart positioner Automatic teach function Contact-free position sensor Compact
More informationSeries 3730 Type Electropneumatic Positioner
Series 3730 Type 3730-0 Electropneumatic Positioner Application Single-acting or double-acting positioner for attachment to pneumatic control valves Set point Travel 4 to 20 ma 5.3 to 200 mm The positioner
More informationselection of special materials is available to handle almost any fluid.
For Pressure Transmitters and Bourdon Tube Pressure Gauges Types 839 X Chemical Seals for Various Applications Advantages / Benefits Separation of medium and measuring device in difficult applications
More informationTurbine Wheel Flow Meter/ Monitor for Liquids
Turbine Wheel Flow Meter/ Monitor for Liquids measuring monitoring analysing Measuring range: -0 L/min water Measuring accuracy: ±.5% f.s. pmax: 00 bar, tmax: 80 C Viscosity range: low viscous Connection:
More informationProduct Catalog. Represented by Norstat Inc. in North America
Product Catalog Represented by Norstat Inc. in North America About MP-Sensor MP-SENSOR a Technology Company located in Neuhausen in the south of Germany near Stuttgart is a company specializing in the
More informationOperating pressure (bar) kv factor (m 3 /h) *3)
/ way poppet valves (stainless steel) electromagnetic actuated, directly controlled G /8, G /4 or /4 NPT Working from 0 bar up Assembled free of oil and grease Suited for fine vacuum down to,33 0 - mbar
More informationFusion of electronic pressure sensor and analogue display.
Fusion of electronic pressure sensor and analogue display. Pressure sensors www.ifm.com/gb/pg fluid sensors and diagnostic systems position sensors and object recognition bus, identification and control
More informationPressure transmitter/pressure switch PASCAL CS
Pressure transmitter/pressure switch PASCAL CS for food/pharmaceutical/biotechnology, Type series CS2110 Features Multifunctional pressure transmitter/pressure switch Hygienic case with no notches or indentations
More informationOperating manual LRD 325. Conductivity measuring cell to be installed in pipelines
Operating manual Conductivity measuring cell to be installed in pipelines ba55321de02 10/2010 Copyright Weilheim 2010, WTW GmbH Reprinting - even as excerpts - is only allowed with the explicit written
More informationElectromechanical pressure switches
Presentation Electromechanical pressure switches For control circuits, types ACW and ADW Presentation Pressure switches type ACW and ADW are switches for control circuits, with an adjustable differential.
More information711, 728, 751. Ball Valve, Stainless steel Multi-port
Ball Valve, Stainless steel Multi-port Construction GEMÜ 711, 728 and 751 are 2/2-way stainless steel ball valves with top flange EN ISO 5211 in sizes 1/4 to 2 (DN 8 to DN 50). The top flange enables both
More informationSMD 1B / SMD 2 / SMD 3 flow meters
1-3021-EN Modular design for oil circulating lubrication systems with gearwheel-type flow indicator and bypass system SMD 1B SMD 2 SMD 3 Example of SMD in a stainless steel cabinet Application Flow meters
More informationD Issue A. Instruction Manual. Active Strain Gauge
Instruction Manual D357-35-880 Issue A Active Strain Gauge Description ASG2-1000-1/8 NPT ASG2-1000-NW16 ASG2-2000-1/8 NPT ASG2-2000-NW16 Item Number D357-35-000 D357-36-000 D357-37-000 D357-38-000 Declaration
More information