Compression Fittings

Size: px
Start display at page:

Download "Compression Fittings"

Transcription

1 ompression Fittings TITN ompression Fittings are designed to comply with established industry standards. This economical fitting is available in a wide range of off-the-shelf sizes and styles. They are manufactured from high quality DZR brass alloy. ADVANTAGES Simple to assemble. No soldering, flaring or deburring is necessary. Suitable for use in a wide variety of applications. ALIATINS ay be used with copper, aluminium, brass, and plastic tubing. Use with steel tubing is not recommended. Installation should be where low to medium pressures are encountered, and modest tube vibration/movement is involved. Suitable for hazardous liquids, oils, and fuel. Not recommended for use with gas WRKING RESSURES Generally, working pressure is dependant upon the type of tubing used and not the fitting. onsequently the table shown below should be used as a guide only. ASSEBLY I. Slide nut then sleeve onto tube ensuring threaded end of nut is facing the sleeve. II. If using a plastic tube, push a 261 Insert into tube to prevent tube from collapsing. III. Insert the tube into the fitting until the tube has bottomed onto the fitting shoulder. IV. Screw nut onto the fitting and tighten "hand tight". Using the table below, follow the number of additional wrench turns. Size Hydraulic ka [SI] neumatic ka [SI] Wrench Turns 1/ [500] 2000 [290] 1/1 1/ [500] 1750 [250] 1/1 1/ [400] 1400 [200] 1/1 1/ [400] 1400 [200] 1/1 3/ [290] 1050 [150] 1/1 1/ [290] 1050 [150] 1½ 5/ [200] 700 [100] 1½ 3/ [200] 700 [100] 1½ * All prices are in New Zealand Dollars ex GST AGE 13

2 60N ompression Fittings Sleeve For All aterials. Ideal For Nylon 60N / N / N / N / N / N / N / N / N16 1 1" Sleeve Ideal For opper / / / / / / / / ompression Nut / / / / / / / / " AGE 14 * All prices are in New Zealand Dollars ex GST

3 ompression Fittings Hose Insert 261 rovides Support For lastic s rice er D ID iece / mm /4 3.86mm / mm /8 5.84mm /2 9.14mm / mm 1.94 Double Union 62 Supplied omplete With 60N Sleeves and 61 Nuts / / / / / / / / Reducing Union Supplied omplete With 60N Sleeves and 61 Nuts 62R rice er iece 62R / R / R / R / R0804-1/ R / R1006-5/ * All prices are in New Zealand Dollars ex GST AGE 15

4 ompression Fittings 64 Union Tee Supplied omplete With 60N Sleeves and 61 Nuts / / / / / / / / Union Elbow Supplied omplete With 60N Sleeves and 61 Nuts / / / / / / / / Female onnector Supplied omplete With 60N Sleeves and 61 Nuts /8 1/8 BS /16 1/8 BS /4 1/8 BS /4 1/4 BS /4 3/8 BS /4 1/2 BS /16 1/8 BS /16 1/4 BS /16 3/8 BS 8.14 ontinued on next page... AGE 16 * All prices are in New Zealand Dollars ex GST

5 ompression Fittings...ontinued from previous page. Female onnector /8 1/8 BS /8 1/4 BS /8 3/8 BS /8 1/2 BS /2 3/8 BS /2 1/2 BS /4 1/2 BS /4 3/4 BS ale onnector 68 Supplied omplete With 60N Sleeves and 61 Nuts /8 1/8 BST /8 1/4 BST /16 1/8 BST /16 1/4 BST /4 1/8 BST /4 1/4 BST /4 3/8 BST /4 1/2 BST /4 3/4 BST /16 1/8 BST /16 1/4 BST /16 3/8 BST /16 1/2 BST /8 1/8 BST /8 1/4 BST /8 3/8 BST /8 1/2 BST /2 1/4 BST /2 3/8 BST /2 1/2 BST /2 3/4 BST /8 3/8 BST /8 1/2 BST /8 3/4 BST /4 1/4 BST /4 1/2 BST /4 3/4 BST " 1" BST * All prices are in New Zealand Dollars ex GST AGE 17

6 ompression Fittings 69 ale Elbow Supplied omplete With 60N Sleeves and 61 Nuts /8 1/8 BST /16 1/8 BST /4 1/8 BST /4 1/4 BST /4 3/8 BST /16 1/8 BST /16 1/4 BST /8 1/8 BST /8 1/4 BST /8 3/8 BST /8 1/2 BST /2 1/4 BST /2 3/8 BST /2 1/2 BST /8 3/8 BST /8 1/2 BST /4 1/2 BST /4 3/4 BST Female Elbow Supplied omplete With 60N Sleeves and 61 Nuts /8 1/8 BS /16 1/8 BS /4 1/8 BS /8 1/4 BS /2 3/8 BS AGE 18 * All prices are in New Zealand Dollars ex GST

7 ompression Fittings Union ale Run Tee 71 Supplied omplete With 60N Sleeves and 61 Nuts /8 1/8 BST /16 1/8 BST /4 1/8 BST /4 1/4 BST /16 1/8 BST /16 1/4 BST /8 1/4 BST /2 3/8 BST Union ale Branch Tee 72 Supplied omplete With 60N Sleeves and 61 Nuts /8 1/8 BST /16 1/8 BST /4 1/8 BST /4 1/4 BST /16 1/8 BST /16 1/4 BST /8 1/4 BST /8 3/8 BST /2 1/4 BST /2 3/8 BST ale/female Run Tee 76 Supplied omplete With 60N Sleeves and 61 Nuts /8 1/8 BST /16 1/8 BST /4 1/8 BST /16 1/8 BST /8 1/4 BST * All prices are in New Zealand Dollars ex GST AGE 19

8 etric ompression Fittings 60N etric Sleeve For All aterials. Ideal For Nylon 61 60N mm N mm N mm N mm N mm N mm etric ompression Nut mm mm mm mm mm mm etric Hose Insert rovides Support For lastic s. rice er D ID iece mm 2.25 mm mm 3.50 mm mm 5.05 mm mm 6.35 mm mm 8.40 mm 1.60 AGE 20 * All prices are in New Zealand Dollars ex GST

9 etric ompression Fittings etric Double Union Supplied omplete With 60N Sleeves and 61 Nuts 62 art Number art Number art Number art Number Standard ack Standard ack Standard ack Standard ack ipe Thread ipe Thread ipe Thread ipe Thread rice er iece mm mm mm mm mm mm etric Union Tee Supplied omplete With 60N Sleeves and 61 Nuts rice er iece mm mm mm mm mm mm etric Union Elbow Supplied omplete With 60N Sleeves and 61 Nuts rice er iece mm mm mm mm mm mm etric Female onnector Supplied omplete With 60N Sleeves and 61 Nuts rice er iece mm 1/4 BS mm 1/4 BS mm 1/4 BS mm 3/8 BS mm 1/2 BS * All prices are in New Zealand Dollars ex GST AGE 21

10 68 etric ompression Fittings etric ale onnector Supplied omplete With 60N Sleeves and 61 Nuts mm 1/8 BST mm 1/4 BST mm 1/8 BST mm 1/4 BST mm 3/8 BST mm 1/8 BST mm 1/4 BST mm 3/8 BST mm 1/2 BST mm 1/8 BST mm 1/4 BST mm 3/8 BST mm 1/2 BST mm 1/4 BST mm 3/8 BST mm 1/2 BST mm 3/9 BST mm 1/2 BST etric ale Elbow Supplied omplete With 60N Sleeves and 61 Nuts mm 1/8 BST mm 1/4 BST mm 1/8 BST mm 1/4 BST mm 3/8 BST mm 1/8 BST mm 1/4 BST mm 3/8 BST mm 1/8 BST mm 1/4 BST mm 3/8 BST mm 1/4 BST mm 3/8 BST mm 1/2 BST AGE 22 * All prices are in New Zealand Dollars ex GST

Pipe Fittings. ADVANTAGES Very easy to assemble. No special tools or extra parts are necessary. May be assembled/ disassembled numerous times.

Pipe Fittings. ADVANTAGES Very easy to assemble. No special tools or extra parts are necessary. May be assembled/ disassembled numerous times. Fittings TTON Fittings are manufactured with female R Series and male BST threads in accordance with AS1772. These robust fittings are available in a comprehensive range of sizes ranging from 1/8" to 1".

More information

45 Flare F L A R E. SPECIAL SIZES Other sizes not specified are available upon request.

45 Flare F L A R E. SPECIAL SIZES Other sizes not specified are available upon request. 45 Flare TTON Flare Fittings are manufactured especially with hazardous liquids and gasses in mind. They are available in sizes ranging from 1/8" to 3/4", and are manufactured from high quality DZR grade

More information

Poly-Tite Fittings. Order By part number and name.

Poly-Tite Fittings. Order By part number and name. oly-tite ittings Advantages A compact brass compression fitting designed to speed any installation. Body, nut and sleeve are furnished pre-assembled, ready for installation. An exclusive acetal copolymer

More information

Compression fittings Metric and inch

Compression fittings Metric and inch Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.

More information

1COMPRESSION FITTINGS

1COMPRESSION FITTINGS SECTION 1COMPRESSION FITTINGS TECHNICAL INFORMATION Wade Couplings consistently produce cost effective, reliable leak-tight joints. All Wade couplings are specially designed for use with Wade nuts and

More information

Compression Fittings

Compression Fittings RSS COPRESSION Compression Fittings RSS FITTINS Thread - Tube O.D. 1/8 /16 1/4 5/16 /8 7/16 1/2 5/8 /4 7/8 Thread - 5/16-24 /8-24 7/16-24 1/2-24 9/16-24 5/8-24 11/16-20 1/16-18 1-18 1-1/8-18 Working Pressure

More information

Economizer Regulator Filter Upgrade

Economizer Regulator Filter Upgrade Overview Chart LNG has released a new and improved economizer regulator, and filtering system. The new economizer filter system is designed to enhance reliability, and offer lower operating costs. In 2012

More information

PL Nickel-Plated Brass Spigot Fitting Range

PL Nickel-Plated Brass Spigot Fitting Range P Nickel-Plated Brass Spigot itting Range P nickel-plated Brass Spigot ittings Stud ittings BP 3BP 4BP BSPP 8BP Metric BP 3BP 4BP BSPP 8BP Metric RBP R3BP SBP S3BP Banjo itting Tube-to-Tube ittings omplementary

More information

15 and 16 Series BSP and hose fittings

15 and 16 Series BSP and hose fittings SP and hose fittings > > Port size: M5, 1/8... 1 > > xtensive range of shapes and sizes including manifolds > > High temperature and pressure copper sealing washers supplied with ISO threads Technical

More information

10 series (Pneufit) Push-in fittings Ø mm tube size, BSP threads

10 series (Pneufit) Push-in fittings Ø mm tube size, BSP threads 0 series (Pneufit) Push-in fittings Ø 4... 4 mm tube size, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated

More information

brass compression fittings

brass compression fittings compression fittings principle of universal compression fittings The range is called universal as it offers the maximum number of direct fitting alternatives with the minimum number of components. Tube

More information

JOHN GUEST SPEEDFIT FITTINGS

JOHN GUEST SPEEDFIT FITTINGS G6300 JOHN GUEST SPEEDFIT FITTINGS Grey acetyl copolymer construction with nitrile o-rings. FDA approved materials on all wetted surfaces. Meet NSF International Standards 51 and 61. Part Cross Pipe PRICE

More information

M M. P ipe BRASS BRASS FITTINGS F G. Actual outside diameters of pipe threads. Actual Male Thread Profiles

M M. P ipe BRASS BRASS FITTINGS F G. Actual outside diameters of pipe threads. Actual Male Thread Profiles RSS FITTINS Pipe RSS Lead Free Fittings see pages 166-175 For ronze & Larger Sizes see pages 208-215 For SPT/ SPP see pages 116-117 P ipe Size 1/16 1/ 8 1/ 4 3/ 8 1/ 2 3/ 4 1 T hread Size e 1/16-27 1/8-27

More information

IDC Field Wireable eurofast & picofast Connectors

IDC Field Wireable eurofast & picofast Connectors Advanced Connection Solutions for Manufacturers Worldwide! IDC Field Wireable eurofast & picofast Connectors picofast Field Wireable IDC Connector eurofast Field Wireable IDC Connector Overview Connection

More information

Compression Style Pneumatic

Compression Style Pneumatic Compression Style Pneumatic Compression Economical U isted Thermoplastic / Soft etal Tubing Parker etru-ok Captive Sleeve etric Tubing PT, BSPT, BSPP, etric Threads Compress-lign Captive Sleeve Two piece

More information

PureFlow PEX Crimp Fittings Most widely recognized fitting system in North America

PureFlow PEX Crimp Fittings Most widely recognized fitting system in North America PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only

More information

Catalog 3501E Tube to ale PTF 169C-269C ale Elbow Union Tee Compression Style, Pneumatic 169P/269P 169P 169PS 169H 179C Elbow ale Elbow ong Elbow ale

Catalog 3501E Tube to ale PTF 169C-269C ale Elbow Union Tee Compression Style, Pneumatic 169P/269P 169P 169PS 169H 179C Elbow ale Elbow ong Elbow ale Compression Style Pneumatic Compression Fittings... 5 Compress-lign Fittings... 13 Parker etru-ok Fittings... 20 Poly-Tite Fittings... 30 Hi-uty Flareless Tube Fittings... 42 The World Standard Catalog

More information

Flareless Bite Type Fittings

Flareless Bite Type Fittings Ferulok Flareless Bite Type Fittings Ferulok Flareless Bite Type Fittings 4300 atalog BU TU WLN HBU Nut Ferrules Bulkhead Locknut Union Nuts, Ferrules, Locknuts Straights 7 7 7 7 WBU F5BU FBU GBU TRBU

More information

Compression Fittings 34 Series Inch

Compression Fittings 34 Series Inch 4 Series /6" O/ l Wide range of types and sizes l Rugged and durable l Suitable for use under extreme conditions of pressure and temperature l Ideal for most general industrial applications Technical ata

More information

10 series (Pneufit) Push-in fittings Ø mm O/D tube, BSP threads

10 series (Pneufit) Push-in fittings Ø mm O/D tube, BSP threads 0 series (Pneufit) Push-in fittings Ø 4... 4 mm O/D tube, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated

More information

Stainless One-touch Fittings. Applicable Tubing. Tube material Tube O.D. Specifications. Thread Nut Sealant (Thread portion) Component Materials

Stainless One-touch Fittings. Applicable Tubing. Tube material Tube O.D. Specifications. Thread Nut Sealant (Thread portion) Component Materials Stainless One-touch Fittings Series KG Guide Collet Chuck Accepts nylon, soft nylon and polyurethane tubes. as large retaining force. Chuck certainly bites tube and collet increases retaining force. Release

More information

Intru-Lok Flareless Bite Type Fittings

Intru-Lok Flareless Bite Type Fittings Intru-ok Flareless Bite Type Fittings The Fitting Authority 400 atalog Intru-ok Flareless Bite Type Fittings uts, Ferrules, Inserts BIP Knurled ut BI ut BTI ut and Ferrule TI Ferrule TIP Expander / Insert

More information

PNEUFIT 10 series Push-in fittings

PNEUFIT 10 series Push-in fittings PNUFIT 0 series > > Port size: Ø 4... 4 mm O/D tube, SP threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Straight adaptors feature internal hexagon for

More information

Insert Fittings. KF Series

Insert Fittings. KF Series Insert Fittings Series A reliable seal Holds the tube tightly Insert An insert mechanism can provide reliable retaining force on tubes made of a wide variety of materials ube grip (resin sleeve) ube is

More information

Dial Thermometer. Particularities. Brief description. Technical data. Page 1/6. Data Sheet

Dial Thermometer. Particularities. Brief description. Technical data. Page 1/6. Data Sheet Dial Thermometer Data Sheet 608202 Page 1/6 - discontinued - Particularities Temperature indicator for panel mounting Class 2 IP53 front protection Housing sizes: 52 mm and 60 mm dia. Bezel: 48x48 mm,

More information

Approx. 4 s, measured in oil, with a probe Ø of 10 mm made of stainless steel. Influential effect of the ambient temperature

Approx. 4 s, measured in oil, with a probe Ø of 10 mm made of stainless steel. Influential effect of the ambient temperature sales@jumo.co.uk info.us@jumo.net Page/6 Dial Thermometer Type 608225 Special features Class Display ranges from -40 C to +600 C Temperature indicator as built-in or add-on device Stainless steel case

More information

BSP & HOSE Fittings M5, 1/8... 1

BSP & HOSE Fittings M5, 1/8... 1 SP & HOS Fittings M5, 1/8... 1 Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All taper threads pre-coated with non-ptf based sealant Straight Adaptors

More information

MCH WIRE HARNESS WITH QUICK DISCONNECT REPLACEMENT Initial Release 1/31/2013

MCH WIRE HARNESS WITH QUICK DISCONNECT REPLACEMENT Initial Release 1/31/2013 1. Table of Contents 1. Table of Contents Page 1 2. Remove Failed MCH-103.2 Page 1 3. Install MCH-103.2 to MCH-102NW Page 2 4. Install NC3FX-HD to MCH-103.2 Page 3 5. Install MCH-103.2 Battery Terminal

More information

Inch-size One-touch Fittings. Applicable Tubing: Inch Size Connection Thread: UNF, NPT. How to Order. Applicable tubing O.D.

Inch-size One-touch Fittings. Applicable Tubing: Inch Size Connection Thread: UNF, NPT. How to Order. Applicable tubing O.D. Inch- One-touch Fittings Series KQ Tubing: Inch Size Thread:, KQ 0 ow to Order S Symbol Nil ccessory Symbol KQN KQC KQ (KQ) roduct s color Body White Black One-touch s Release button Orange Red Name Nipple

More information

Tech Tubes & Fittings. An ISO 9001: 2008 Company

Tech Tubes & Fittings. An ISO 9001: 2008 Company Tech Tubes & Fittings An ISO 9001: 2008 Company The Company Tech Tubes & Fittings is a highly acclaimed manufacturer and exporter of products like Instrumentation/Tube Fittings, Pipe Fittings, Flanges

More information

06/16 BBK. The economizer. factory when the A. Page 1 of 8. Procedure. using LNG. Safety-0001.

06/16 BBK. The economizer. factory when the A. Page 1 of 8. Procedure. using LNG. Safety-0001. Overview The following Technical Service Bulletin gives the servicing technician detailed instructions to aid with replacing an economizer regulator on a Chart LNG vehicle fuel tank. Economizer Regulator

More information

Copper and Carbon Steel Piping Systems Keeping the art of distribution simple

Copper and Carbon Steel Piping Systems Keeping the art of distribution simple Copper and Carbon Steel Piping Systems Keeping the art of distribution simple Copper Tube & Fittings Shawston offer a complete range of Copper & Carbon Tube, along with a full range of fittings. Our range

More information

Pneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube

Pneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/ tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range

More information

WITH ROLLED STOP COUPLING REDUCER C X C C

WITH ROLLED STOP COUPLING REDUCER C X C C Copperfit Industries Inc. 1280 E. 9th St. Pomona, CA 91766 Tel: (909) 622-6100 (866) 200-1888 Fax: (909) 622-5566 WWW.COPPERFIT.COM COPPER PRESSURE FITTINGS Effective Date: Jan 2018 Version: 2C201801 Spread

More information

Quality, Precision and Unbeatable Value!

Quality, Precision and Unbeatable Value! PUSH IN FITTINGS 31 RX Push In Fittings 1 High quality Push In Fittings in composite materials or all nickel plated brass. 100% leak tested during production, these fittings are suitable for both pneumatic

More information

Pipe Swivels. The Fitting Authority

Pipe Swivels. The Fitting Authority Pipe Swivels The Fitting Authority 0507 007 007 3507 Straights 45 Elbows 307 307 507 5507 07 NPT / NPSM Swivel 90 Elbows 5607 NPT / NPSM Swivel Long Drop 07 077T NPSM Swivel / NPSM Swivel / NPSM Swivel

More information

8100, 8200, , 8202, 8203, 8204, 8205, 8206

8100, 8200, , 8202, 8203, 8204, 8205, 8206 800, 8200, 8300 820, 8202, 8203, 8204, 8205, 8206 W R A, O USA T: 800 32 7950 440 998 2788 F: 440 992 2925... 023208 2 INSTRUCTIONS FOR 3/4,, -/4 DIAMETER TAPS FIGURE A B C D E F G HOT TAP SPINDLE HOT

More information

precision pipe fittings

precision pipe fittings Precision Pipe Fittings 1 8 to 1 sizes 316 stainless steel, brass, and exotic materials NPT threads HOKE Inc. PO Box 4866 Spartanburg, SC 29305-4866 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com

More information

pneumatic push-in fittings system LF 3000

pneumatic push-in fittings system LF 3000 pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329

More information

Socket Head Cap Screw Metric

Socket Head Cap Screw Metric 1 2 0 0 M2 WRENCH 1.mm 11 1 1 1 1 21 0 Pcs 1, 0 0 0 00 00 00 00 00 00 00 00 WRENCH 2mm 11 1 1 1 0 Pcs 0 0 0 00 00 00 00 00 WRENCH 2.mm 21 002 11 00 00 1 0 01 21 002 000 0 Pcs 1 0 2 0 00 00 00 00 00 00

More information

PRK. Plastic pipe couplings Suitable for PEL, PEH and PEM pipes

PRK. Plastic pipe couplings Suitable for PEL, PEH and PEM pipes PRK Plastic pipe couplings Suitable for PEL, PEH and PEM pipes IMI TA / Couplings / PRK PRK This plastic pipe coupling is suitable for PEL, PEH and PEM pipes and can be used both above and underground.

More information

UNITED STATES MEXICO CANADA

UNITED STATES MEXICO CANADA www.legris.com Online catalog with technical information and training module to help you implement the right solution. Find technical data on your fitting and download a CAD in many different formats.

More information

HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0215

HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0215 HERZ STRÖMAX 7GM/GML/GR HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0 H Rp L SW L L Dimensions in mm

More information

Accessories for Lubrication Systems Product Catalogue

Accessories for Lubrication Systems Product Catalogue Accessories for Lubrication Systems Product Catalogue Productivity is key in today s global economy. Proper lubrication increases uptime and makes maintenance routines simple. Accessories for Lubrication

More information

Code Type I.D. (mm) O.D. (mm) Operating Pressure (PSI) Min. Burst Pressure (PSI)

Code Type I.D. (mm) O.D. (mm) Operating Pressure (PSI) Min. Burst Pressure (PSI) 411 Series Braided Teflon Hose Order by Phone +44 (0) 121 525 5800 Type 411 Teflon Smooth Bore Hose The exceptional resistance of Teflon to high temperatures, permeability, chemical attack, water absorption

More information

We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity.

We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. ENGINEERED FOR SUPERIOR PERFORMANCE Compressed Air & Gas Systems

More information

Threaded thermocouple Miniature design Model TC10-D

Threaded thermocouple Miniature design Model TC10-D Temperature Threaded thermocouple Miniature design Model TC10-D WIKA data sheet TE 65.04 for further approvals see page 2 Applications Machine building, plant and vessel construction Propulsion technology

More information

LF3800 stainless steel push-to-connect fittings

LF3800 stainless steel push-to-connect fittings 3800 push-to-connect fittings principle of system 3800 push-to-connect fitting system The 3800 range provides the advantages of push-to-connect fittings instant connection and disconnection for a wider

More information

Assembly and Maintenance

Assembly and Maintenance Assembly and Maintenance Assembly and Maintenance Test Pumps Pressure Test Pumps Tests all types of installations such as heating, compressed air and refrigeration systems, oil installations, fire lines

More information

SADDLES & SNAP-ON SADDLES

SADDLES & SNAP-ON SADDLES SADDES & SAP-O SADDES When Assembling Spears Saddles to PVC pipe, Spears anufacturing Company recommends Spears PVC-19 Solvent Cement and Spears Primer-68/Primer-70 or equivalent. Although good connections

More information

Copper Fittings: Wrot Pressure

Copper Fittings: Wrot Pressure Phone: (877) 515-4522 Dated: Jan. 23, 2017 Fax: (877) 595-4522 Copper Fittings: Wrot Pressure Male Adapter C X M Female Adapter C X F HL15-101-0001 1/8 1/4 x 1/8 21.04 25 3000 HL15-105-0001 1/8 1/4 x 1/8

More information

Copper Fittings: Wrot Pressure

Copper Fittings: Wrot Pressure Phone: (877) 515-4522 Dated: Feb. 9, 2015 Fax: (877) 595-4522 Copper Fittings: Wrot Pressure Male Adapter C X M Female Adapter C X F HL15-101-0001 1/8 1/4 x 1/8 19.36 25 3000 HL15-105-0001 1/8 1/4 x 1/8

More information

37 Stainless Steel. A wide range of end configurations are suitable for many Hydraulic applications

37 Stainless Steel. A wide range of end configurations are suitable for many Hydraulic applications JIC Prochem manufactures and supplies an extensive range of JIC Fittings and Adaptors in all configurations. 37 Stainless Steel Fittings Prochem 37 JIC Fittings and Adaptors provide a straightforward,

More information

Timken Lubrication Delivery Systems. Friction management solutions SM to keep systems running smoothly

Timken Lubrication Delivery Systems. Friction management solutions SM to keep systems running smoothly Timken Lubrication Delivery Systems Friction management solutions SM to keep systems running smoothly G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication

More information

FSE 130 Fuel System Canister

FSE 130 Fuel System Canister FSE 130 Fuel System Canister 8.2 4014 6 0 5 9 6 0 6 2 1013 6056 6060 6061 6052 4015 6053 6051 4016 4017 6050 3017 (Not visible on the back) 2010 2009 3016 7050 6058 6057 1011 6055 1012 6054 FSE 130 Fittings

More information

Compressed Air Systems Pneumatic Fittings LLDPE Tube

Compressed Air Systems Pneumatic Fittings LLDPE Tube John Guest Limited Horton Road, West Drayton, Middlesex UB7 8JL, England Tel: 01895 449233 Fax: 01895 420321. www.johnguest.com and are registered trademarks of John Guest International Limited Copyright

More information

Resistance thermometer With spring-loaded tip Model TR55

Resistance thermometer With spring-loaded tip Model TR55 Temperature Resistance thermometer With spring-loaded tip Model TR55 WIKA data sheet TE 60.55 for further approvals see page 2 Applications Bearing temperature measurement on: Pumps Gears Motors Special

More information

PEX Press EN_US_2014_V2.indb 79 2/7/ :15:37 AM

PEX Press EN_US_2014_V2.indb 79 2/7/ :15:37 AM 79 For both residential and commercial applications, Viega PEX Press is the trusted way to join PEX tubing. As the world leader in press technology, Viega was the first to offer a press system to the PEX

More information

Rev/02/ Flared T (SAE J514) ube Fittings

Rev/02/ Flared T (SAE J514) ube Fittings Rev/02/2013 37 lared Tube ittings (SA J514) Introduction PANAM has been in the field of manufacturing precision Tube ittings and Instrumentation valves since the last Two decades. With a team of dedicated

More information

Specialist Suppliers of Gas Analysis Equipment FITTINGS AND TUBING CATALOGUE. What You Measure, We Manage

Specialist Suppliers of Gas Analysis Equipment FITTINGS AND TUBING CATALOGUE. What You Measure, We Manage Specialist Suppliers of Gas Analysis Equipment FITTINGS AND TUBING CATALOGUE What You Measure, We Manage ABOUT US ABOUT US DRM Technic is a global manufacturer and supplier of gas analysis solutions and

More information

37 Flared Tube Fittings. SCO O-Ring Face Seal Fittings

37 Flared Tube Fittings. SCO O-Ring Face Seal Fittings 3 Flared SCO O-Ring Tube Face Seal Fittings Fittings Technical data Basic Components & Assembly O-Ring Information SCO Nut Test ports at two locations for easy leak testing - Standard * SCO Bodies; 0 durometer

More information

Q-Flow product information. Variable area flowmeters for gases and liquids

Q-Flow product information. Variable area flowmeters for gases and liquids Q-Flow product information Variable area flowmeters for gases and liquids MyScale Air mm ALU Attractive design and price: Variable area flowmeters Q-Flow The proven variable area flowmeter with compact,

More information

Wholesale Buyer s Guide

Wholesale Buyer s Guide Flange Packs Bolt Sets Gaskets All Thread Poly Wrap Valve Stem Extensions Water & Gas Tubing Gas Products Meter Cans And much, much more... Wholesale Buyer s Guide Bolt Length Chart 3 Bolt Sets Flange

More information

GF Sentry Flame Failure Series

GF Sentry Flame Failure Series GF Sentry Flame Failure Series Gas Range Match Broilers Parts List Models GF8-BRL GF2-BRL GF30-BRL GF36-BRL Document Number: G_GMD_PL_RMBROILERSGFSERIES_GF-BRL (Rev 6 05/207) Rating Plate Location The

More information

Q2 XBee Handheld Controller Assembly Guide

Q2 XBee Handheld Controller Assembly Guide Q2 XBee Handheld Controller Assembly Guide Copyright Quantum Robotics Inc. Q2 Controller V1.0 1 Parts List: The kit comes with 14 individual bags. 1. Case Top and Bottom 2. Case Screw Package containing:

More information

PNEUMATICS FITTINGS See easy to make a connection on page Technical Specification shown on pages

PNEUMATICS FITTINGS See easy to make a connection on page Technical Specification shown on pages PNEUMATICS FITTINGS Super Speedfit Push-in fittings have been specially designed for miniature pneumatics applications. They provide a fast and secure way of connecting tubes and offer considerable advantages

More information

Vol. 33. Copyright 2007 by C&D Valve Manufacturing Company

Vol. 33. Copyright 2007 by C&D Valve Manufacturing Company Vol. 33 Copyright 200 by C&D Valve Manufacturing Company INDUSTRY COMPLIANCE: Access fittings manufactured and sold by C&D Valve meet ARI Standard 20-9 GUARANTEE: C&D Valve Mfg. Co. products are unconditionally

More information

Committed to Excellence! Circular Connectors

Committed to Excellence! Circular Connectors Committed to Excellence! Circular Connectors (M16, M23, M27, M40, RJ45, PoE, Twilock, Twintus) 2D / 3D CAD Available! No Minimum Orders! ISO 9001:2000 ATEX Setting Standards M23 Circular Connectors Signal

More information

FITTINGS CATALOGUE Celebrating Sixty Years In Business

FITTINGS CATALOGUE Celebrating Sixty Years In Business FITTINGS CATALOGUE 1954 60 2014 Celebrating Sixty Years In Business The Company 1954 60 2014 Celebrating Sixty Years In Business 2014 sees Flowfl ex Components celebrate its 60th year in business. Established

More information

Terminals, Lugs, and Fasteners

Terminals, Lugs, and Fasteners Terminals, Lugs, and Fasteners East Penn cast terminals are manufactured with 100% recycled lead. Lead is recognized as the premium choice in battery cable terminals because of its maximum current carrying

More information

Drop-Down Launcher Basic Kit -1 Stock No. Description Function List Price LNCH " Drop-Down, I-L Motor Launcher

Drop-Down Launcher Basic Kit -1 Stock No. Description Function List Price LNCH  Drop-Down, I-L Motor Launcher Drop-Down Launcher Basic Kit -1 LNCH-15-02 1.5" Drop-Down, I-L Motor Launcher Complete w/ Slide and Base Rail, TWO HOSE CLAMPS for NOS & GOX flex lines, AND adapter brackets to mount to 1.0" rail 250.00

More information

60 series, 2/2 or 3/2 Ball valve

60 series, 2/2 or 3/2 Ball valve >> Port size: Rp/..., /... >> Ideally suited for most general purpose applications >> Easy installation, simple operation and maintenance free >> -way ball valves with actuator interface conforming to

More information

G SERIES GAS RANGE MATCH BROILER

G SERIES GAS RANGE MATCH BROILER G SERIES GAS RANGE MATCH BROILER models G18/24/30/36/48-BRL Toll Free Phone, (US & Canada): (800) 427-6668 Toll Free Fax, (US & Canada): (800) 361-7745 http://www.garland-group.com G_GMD_PL_RMBROILERSGSERIES_G-BRL

More information

Thread Lubricant: Use a process compatible fluid Wrench Torque: in-lbs ( Nm)

Thread Lubricant: Use a process compatible fluid Wrench Torque: in-lbs ( Nm) Common Specifications (applies to all fittings in this datasheet) DESCRIPTION is an improved cone type fitting system that adds a unique o-ring sealing system which permits leak free connections without

More information

HOW TO ORDER SWIVEL JOINTS

HOW TO ORDER SWIVEL JOINTS HOW TO ORDER SWIVEL JOINTS Emco Wheaton offers a wide variety of swivel joints to fit almost any application. In order to assist you in ordering the Correct swivel joint, we have developed a guideline

More information

CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES

CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES All bidders MUST submit product specifications, literature describing items, manufacturers name, product code and part numbers with

More information

Threaded resistance thermometer Miniature design Model TR10-D

Threaded resistance thermometer Miniature design Model TR10-D Temperature Threaded resistance thermometer Miniature design Model TR10-D WIKA data sheet TE 60.04 for further approvals see page 2 Applications Machine building, plant and vessel construction Propulsion

More information

ASSET LGA1366 Top-side Probe

ASSET LGA1366 Top-side Probe ASSET LGA1366 Top-side Probe (Manual version 1.1) For gaining test access to the debug port of Intel processors that are designed for use in LGA1366 Sockets (Socket B). These include the Intel Core i7

More information

Pipe Fittings and Port Adapters

Pipe Fittings and Port Adapters Pipe Fittings and Port Adapters The Fitting Authority 4300 atalog Pipe Fittings and Port Adapters F5OHAO SAE-ORB / SAE-ORB F5OF SAE-ORB / NPTF FF FFF ong FF33M BSPT / BSPT Nipples G7 G7 G7 G7 G8 G5HG5

More information

Supplementary instructions. Plug connector Harting HAN 8D. for continuously measuring sensors. Document ID: 30376

Supplementary instructions. Plug connector Harting HAN 8D. for continuously measuring sensors. Document ID: 30376 Supplementary instructions Plug connector Harting HAN 8D for continuously measuring sensors Document ID: 30376 Contents Contents 1 For your safety 1.1 Appropriate use... 3 1.2 Impermissible use... 3 1.3

More information

Pressed for time? JUST PRESS, CRIMP AND SAVE.

Pressed for time? JUST PRESS, CRIMP AND SAVE. Pressed for time? JUST PRESS, CRIMP AND SAVE. 03/17 Hammond Valve s newly expanded UltraPress line will save you more time than ever. Designed for press-connection systems piping potable water, HVAC and

More information

PNEUMATIC TUBING FITTING

PNEUMATIC TUBING FITTING 2011 PNEUMATIC TUBING FITTING CATALOGUE FLYTECH ENGINEERING SDN BHD GENERAL INFORMATION Flytech had cooperated with ISAIAH GROUP from Taiwan to promote the Pneumatic Fitting & Tubing. The company takes

More information

Fluid Cooling Shell & Tube UC / UCV Series

Fluid Cooling Shell & Tube UC / UCV Series luid ooling Shell & Tube U / UV Series 0916 ST & STISS ST OSTUTIO erformance otes Steam & large temperature differentials U tube emovable tube bundle for servicing educes thermal expansion stresses 3/8"

More information

M-Line Series MN Multi-Pin Plugs and Receptacles Vac, Vdc

M-Line Series MN Multi-Pin Plugs and Receptacles Vac, Vdc Applications Designed for the roughest industrial applications, providing reliable, rugged service for power, control and instrumentation. For use in the roughest industrial applications, ranging from:

More information

Plumbing Brass Specification Guide

Plumbing Brass Specification Guide Plumbing Brass Specification Guide www.wattscanada.ca The Dial-ese Cartridge, a Standard in Canadian Plumbing for 0 Years Since its conception in the early 0s, the Dial-ese cartridge has proven to be one

More information

Price List Insert Fittings & Tank Tees

Price List Insert Fittings & Tank Tees Price List Insert Fittings & Tank Tees LT-WS0613 LT-IFT0813 AUGUST JULY 1, 26, 2013 SUPERSEDES SUPERCEDES APRIL JAN 31, 11, 2011 PRICE LIST It's all about performance INSERT FITTINGS / TANK TEES BRONZE

More information

Viega PEX Manifold Plumbing Systems

Viega PEX Manifold Plumbing Systems Viega PureFlow ViegaPEX Tubing Viega PEX Manifold Plumbing Systems MANABLOC Mounting Straps Pair of mounting straps with screws Pre-drilled to mount on 16" center studs ViegaPEX tubing is rated at 100

More information

SOCKET FITTINGS. Nom. BLACK PP 6111 NATURAL PP Nom. BLACK PP 6117 NATURAL PP Nom. BLACK PP 6133 NATURAL PP 6233 CHEMTROL CUSTOMER SERVICE

SOCKET FITTINGS. Nom. BLACK PP 6111 NATURAL PP Nom. BLACK PP 6117 NATURAL PP Nom. BLACK PP 6133 NATURAL PP 6233 CHEMTROL CUSTOMER SERVICE POLYPROPYLENE SCHEDULE 80 PIPE, VALVES & FITTINGS BLACK AND CHEM-PURE NATURAL CH-PP-1018 Effective Oct. 01, 2018 Supercedes CH-PP-0118 dated Jan. 01, 2018 Suggested list prices subject to change without

More information

V GM C4500 C5500

V GM C4500 C5500 Illustrated Parts List for VMAC System System V900099 2008-2007 GM C4500 C5500 LMM Duramax 6.6L Diesel without dual alternators System V900098 2007-2006 GM C4500 C5500 Duramax 6.6L Diesel without dual

More information

Illustrated Parts List for VMAC System V Ford SuperDuty F250-F L Gas V8 Engine

Illustrated Parts List for VMAC System V Ford SuperDuty F250-F L Gas V8 Engine Illustrated Parts List for VMAC System V900112 2014-2011 Ford SuperDuty F250-F350 6.2L Gas V8 Engine 1 - Kit Pack List... 2 2 - Fastener Pack, 3800735, V900112... 4 4 - Compressor Sub Components, P120004...

More information

SPH / MA and MA2 components MCS / MA multi-connections. Technical data sheet

SPH / MA and MA2 components MCS / MA multi-connections. Technical data sheet SPH / MA and MA2 components MCS / MA multi-connections Technical data sheet SPH / MA and MA2 components for MCS / MA automatic multi-connections Nominal bore 04, 06, 08, 12, 15, 20, 25, 37, 50 and 75 mm

More information

Pressed for time? JUST PRESS, CRIMP AND SAVE.

Pressed for time? JUST PRESS, CRIMP AND SAVE. Pressed for time? JUST PRESS, CRIMP AND SAVE. 10/18 Milwaukee Valve s newly expanded UltraPress line will save you more time than ever. Designed for press-connection systems piping potable water, HVAC

More information

SPECIFICATIONS & INSTALLATION GUIDE ANOTHER QUALITY PRODUCT BY FORZA GLOBAL GAS CRIMP EDITION: 0001

SPECIFICATIONS & INSTALLATION GUIDE ANOTHER QUALITY PRODUCT BY FORZA GLOBAL GAS CRIMP EDITION: 0001 GAS CRIMP TM SPECIFICATIONS & INSTALLATION GUIDE ANOTHER QUALITY PRODUCT BY FORZA GLOBAL EDITION: 0001 2 GAS CRIMP GAS PIPE FORZA GAS Pipe is multi layered, incorporating a layer of aluminium between an

More information

Pressure Test Pumps. Test Pump. Electric Test Pump. Assembly and Maintenance Test Pumps

Pressure Test Pumps. Test Pump. Electric Test Pump. Assembly and Maintenance Test Pumps Assembly and Maintenance Test Pumps Pressure Test Pumps Tests all types of installations such as heating, compressed air and refrigeration systems, oil installations, fire lines and small bore pipelines.

More information

Combi-System. Composition pipe Copipe

Combi-System. Composition pipe Copipe Combi-System Composition pipe Copipe no. Composition pipe Copipe white rolls DN 10 x 2.0 mm length per roll 50 m 150 10 54 length per roll 100 m 150 01 54 length per roll 200 m 150 02 54 DN 12 16 x 2.0

More information

Wrot and Cast Pressure Fittings

Wrot and Cast Pressure Fittings Wrot and Cast Pressure Fittings 600 Series Wrot 700 Series Cast Adapters................................................ 6-8 Air Chambers............................................. 8 Bulkhead Fittings..........................................

More information

4700A. T nut. EPDM gasket. tubing. 4700tA

4700A. T nut. EPDM gasket. tubing. 4700tA UNDERGROUND WATER SERVICE FITTINGS A.Y. McDONALD MFG. CO. WATER SERVICE PRODUCTS 4-07 Undergrond Water Service Fittings & Coplings n Flare Bll nose end A. Remove the flare nt from the valve or fitting

More information

Hi-Tech Transport Electronics, Inc. DUAL LEVELING VALVE PROCESSOR INSTALLATION MANUAL. For the 4600 Scale System For the 5600 Scale System

Hi-Tech Transport Electronics, Inc. DUAL LEVELING VALVE PROCESSOR INSTALLATION MANUAL. For the 4600 Scale System For the 5600 Scale System Hi-Tech Transport Electronics, Inc. DUAL LEVELING VALVE PROCESSOR INSTALLATION MANUAL For the 4600 Scale System For the 5600 Scale System September 1999 THE ACCURATE ON-BOARD ELECTRONIC SCALE For Air-Ride

More information

SUPERIOR ALUMINIUM COMPRESSED AIR RETICULATION

SUPERIOR ALUMINIUM COMPRESSED AIR RETICULATION A SUBSIDIARY F PNEUTECH GRUP SUPERIR ALUMINIUM CMPRESSED AIR RETICULATIN INDUSTRIAL AIR SYSTEMS NZ FREEPHNE: Email: sales@industrialair.co.nz Web: www.industrialair.co.nz SUPERIR ALUMINIUM CMPRESSED AIR

More information

SharkBite 25 W ARRANTY Sh YEAR arkbite

SharkBite 25 W ARRANTY Sh YEAR arkbite 25 SharkBite WARRANTY YEAR SharkBite The SharkBite Plumbing System SharkBite has established a reputation as one of Australia s best plumbing systems. Quick & easy to use. Fittings for PEX and Copper Pipe

More information