SKILLKUT. * Serrated Teeth Allows More Cutting Surface. PAGE-53 R.E. SKILLINGS SUPPLIES, INC or JD (600) 8531SK2 $ 2.25 EA.
|
|
|
- Clarissa Wood
- 5 years ago
- Views:
Transcription
1 PAGE-53 R.E. SKILLINGS SUPPLIES, INC or SKILLKUT *Designed from in house testing for optimal performance. *Exclusively offered at R.E. Skillings Supplies Inc. *5 teeth per inch vs. 3.5 on Tiger Shark *Easier on guard wear. *Performs better in Wheat and Soybeans. *Made in USA. Union County Grower Says: MY 40 MacDon with the Skillkut section harvested 1600 acres of beans and can still cut! MAC DON 3398SK2 $.90 EA. SCH 4498SK2 $ 1.40 EA. JD (600) 8531SK2 $ 2.25 EA. JD 9531SK2 (BLACK OXIDE) $ 2.00 EA. PART # TO FIT PRICE S SK JOHN DEERE 600 SERIES $2.25 EA. S SK JOHN DEERE SER. $1.40 EA. S SK SCH CUTTER BAR $1.40 EA. S CASE IH, NEW HOLLAND $1.10 EA. S CASE IH 3020/ NH 74C $1.30 EA. S B MAC DON (BLACK) $.90 EA. S MAC DON (CHROME) $1.00 EA. * Serrated Teeth Allows More Cutting Surface. * Stays Sharper Longer. * Lasts Longer. *.116 THICK * Up to 18% Less Force Required To Cut!
2 R.E. SKILLINGS SUPPLIES, INC or PAGE 54 Combine Sickle Parts To Fit John Deere Heads Green Kits Are Made From Recycled Poly Material. Yellow Kits Are Made Of New UHMW Poly Material.*Please Specify F Or Non-F When Ordering.All Kits Are Sold With Pound Rivets! PART # DESCRIPTION PRICE EA. S TPI COARSE SECTION $ 1.25 S TPI SOLID COARSE SECTION $ 1.40 S SOLID BLACK TIGER SHARK SECTION $ OEM 2 PRONG GUARD $ SALE PRONG GUARD $ TCD WEAR PLATE $ 2.95 K WEAR PLATE $ RH CAST HOLD DOWN $ 3.95 WN-H98780 WOBBLE DRIVE ADAPTER $ S REINFORCING STRAP $ AH KNIFE DRIVE HEAD $ B55-065D 50 CT. SECTION BOLTS AND NUTS 11/16 $ B55-085D 15 CT. 1 HEAD BOLTS AND NUTS $ 8.95 H HEADER DRIVE BELT $ SA *SICKLE ASSEMBLY $ SA / 915 *SICKLE ASSEMBLY $ SA * SICKLE ASSEMBLY $ SA / 918 *SICKLE ASSEMBLY $ SA / 920 *SICKLE ASSEMBLY $ SA / 922 *SICKLE ASSEMBLY $ SA / 924 *SICKLE ASSEMBLY $ SA *SICKLE ASSEMBLY $ SA *SICKLE ASSEMBLY (2PC) $ K 13 COMPLETE SICKLE KIT $ /915K 15 COMPLETE SICKLE KIT $765.00/ /920K 20 COMPLETE SICKLE KIT $ /922K 22 COMPLETE SICKLE KIT $ K 25 COMPLETE SICKLE KIT $ K 30 COMPLETE SICKLE KIT $ KBJC X 2 1/16 KNIFE BACK $ P K Poly 1 Finger Kit W/ Guide $ P Poly Auger Finger Only $ 7.95 P P 6 Pack Poly Auger Finger Only $ P STEEL AUGER FINGER (H102724) $ 7.95 ASJE GREEN SKID PLATE KIT $ SALE ASJ YELLOW SKID PLATE KIT $ SALE ASJE GREEN SKID PLATE KIT $ SALE ASJ YELLOW SKID PLATE KIT $ SALE ASJE99200 *20 GREEN SKID PLATE KIT $ SALE ASJ99200 *20 YELLOW SKID PLATE KIT $ SALE ASJ99220 *22 YELLOW SKID PLATE KIT $ SALE ASJE99250 *25 GREEN SKID PLATE KIT $ SALE ASJ99250 *25 YELLOW SKID PLATE KIT $ SALE ASJE99300 *30 GREEN SKID PLATE KIT $ SALE ASJ99300 *30 YELLOW SKID PLATE KIT $ SALE P Reel Finger HCC $ 2.30 P Reel Finger HCC $ 2.70 GF1038-A Wood Bat Reel Finger Poly $ 1.60 GF1238 Tear Drop Reel Finger $ 1.60 P40200 Reel Bearing 200-Early 900 $ 3.75 P175727K Reel Bearing Kit Late 900 $ 3.95 AH Auger Finger Bearing $ 7.75 *SICKLE DOES NOT INCLUDE DRIVE HEAD! PRICES SUBJECT TO CHANGE WITHOUT NOTICE!
3 PAGE 55 R.E. SKILLINGS SUPPLIES, INC or Sickle Parts To Fit John Deere 600F Heads PART # DESCRIPTION PRICE EA. S SK2 SKILLKUT SECTION (BLACK) $ 2.00 S SK2 SKILLKUT SECTION (CHROME) $ 2.25 S SK TIGER SHARK SECTION $ 2.25 H LONG / SHORT COARSE SECTION $ B LONG-SHORT-LONG GUARD $ B SHORT-LONG-SHORT GUARD $ DH LONG-SHORT-LONG GUARD HEAT TREATED $ DH SHORT-LONG-SHORT GUARD HEAT TREATED $ BU 620 CAST ADJUSTABLE HOLD DOWN $ 6.75 BU 625 HIGH ADJUSTABLE HOLD DOWN $ 8.50 B D M6X1.0X16 OVAL SECTION BOLT PACK $ M620OB M6X20 OVAL HEAD BOLT $ 1.00 M625OB M6X25 OVAL HEAD BOLT $ 1.00 R SPLICE KIT OVAL HOLE $ AN220051JD KNIFE DRIVE HEAD $ REINFORCING STRAP $ SA625 *SICKLE ASSEMBLY $ SALE SA630 *2 PC. SICKLE ASSEMBLY $ SALE SA635 *2 PC. SICKLE ASSEMBLY $ SALE KB KNIFE BACK ONLY (OVAL) $ KB KNIFE BACK ONLY (OVAL) $ ASJ YELLOW SKID PLATE KIT $ SALE ASJ YELLOW SKID PLATE KIT $ SALE ASJ YELLOW SKID PLATE KIT $ SALE P869K Auger Finger Kit $ P869 Auger Finger Only $ 7.50 P Pack Auger Finger Only $ P Reel Finger HCC $ 2.70 Parts To Fit John Deere 600FD Draper Heads PART # DESCRIPTION PRICE EA. S SK2 SKILLKUT SECTION (CHROME) $ 2.25 S SK2 SKILLKUT SECTION ( BLACK) $ 2.00 S CENTER OVERLAP SECTION $ 5.95 BU 620 CAST ADJUSTABLE HOLD DOWN $ 6.75 BU 625 HIGH ADJUSTABLE HOLD DOWN $ 8.50 DC KNIFE HEAD DRAPER ONLY $ SCPO12543 KNIFE HEAD NYLON BUSHING $ B LONG-SHORT-LONG GUARD $ B SHORT-LONG-SHORT GUARD $ DH LONG-SHORT-LONG GUARD HEAT TREATED $ DH SHORT-LONG-SHORT GUARD HEAT TREATED $ HXE18172 DOUBLE DRIVE LOWER CENTER GUARD $ SALE HXE19625 DOUBLE DRIVE LOWER CENTER GUARD $ SALE AH DOUBLE DRIVE UPPER CENTER GUARD $ SALE H SINGLE PRONG RH END GUARD (635FD) $ SALE SA630DD *2 PC. SICKLE ASSEMBLY LESS OVERLAP STRAP $ SA635DD *2 PC. SICKLE ASSEMBLY LESS OVERLAP STRAP $ SA640DD *2 PC. SICKLE ASSEMBLY LESS OVERLAP STRAP $ MW DOUBLE DRIVE SKID SET <2012 $ SALE MW DOUBLE DRIVE SKID SET $ SALE MW DOUBLE DRIVE SKID SET $ SALE MW DOUBLE DRIVE SKID SET <2012 $ SALE MW DOUBLE DRIVE SKID SET $ SALE MW DOUBLE DRIVE SKID SET $ SALE MW ¼ CENTER PLATE 31 X 63.5 $ SALE *SICKLE DOES NOT INCLUDE DRIVE HEAD! PRICES SUBJECT TO CHANGE WITHOUT NOTICE! 1 Piece Knife Backs (Oval Hole) S LH 20 - $ 159 EACH S RH 20 - $ 159 EACH
4 R.E. SKILLINGS SUPPLIES, INC or PAGE 56 Complete Sickle Bar W/ Sections MODEL PART # DESCRIPTION PRICE EA. JD 213 SA213 JOHN DEERE 13 $ JD 215/915 SA215 JOHN DEERE 15 $ JD 216 SA216 JOHN DEERE 16 $ JD 218/918 SA218 JOHN DEERE 18 $ JD 220/920 SA220 JOHN DEERE 20 $ JD 922 SA222 JOHN DEERE 22 $ JD 925 SA925 JOHN DEERE 25 $ JD 930 SA930 JD 30 (2 PC.) $ JD 625F SA625 JD 25 (77) $ SALE JD 630F/FD SA630 JD 30 (2 PC.)(90.5) $ SALE JD 635F SA635 JD 35 (2PC.)(105.5) $ SALE JD FD 635FD SA635DD JD 35 DOUBLE DRIVE RH & LH SICKLES (1PC.) $ 1075 SALE JD FD 640FD SA640DD JD 40 DOUBLE DRIVE RH & LH SICKLES (1PC.) $ 1199 SALE CIH 820 SAC82015 CIH 15 $ CIH 1020 SAC15 CIH 15 $ CIH 1020 SAC175 CIH 17.5 $ CIH 1020 SAC20 CIH 20 $ CIH 1020 SAC225 CIH 22.5 $ CIH 1020/ 2020 SAC25 CIH 25 $ CIH 1020/ 2020 SAC30 CIH 30 (2PC.) $ CNH 3020/NH SAC3025 CIH 25 (3020) CALL CNH 3020/NH SAC3030 CIH 30 (3020) (2PC.) CALL MAC DON SAMD30 SINGLE DRIVE 30 (2PC.) $ MAC DON SAMD35-6MM SINGLE DRIVE 35 (2PC.) $ MAC DON S SINGLE DRIVE 35 (5PC.) $ MAC DON SAMD40-6MM SINGLE DRIVE 40 (2PC.) $ MAC DON SAMD36DD DOUBLE DRIVE 36 (2PC.) $ MAC DON SAMD40DD DOUBLE DRIVE 40 (2PC.) $ MAC DON S SINGLE DRIVE 40 (6PC.) $ MAC DON SAM45DD DOUBLE DRIVE 45 (4PC.) $ ALL SICKLES COME COMPLETE WITH SECTIONS, BOLTS AND KNIFE BACK. THESE UNITS ARE PRICED WITHOUT KNIFE HEADS AND STRAPS! SICKLE KNIFE BACK MATERIAL PART # LENGTH TO FIT HOLE SPACING PRICE EA. KB JD F 1 OVAL HOLE $ KB CASE IH/ JD 2 1/16 $ KBS SCH 2 $ KB LH 20 3 JD FD 1 OVAL HOLE $ KB RH 20 3 JD FD 1 OVAL HOLE $ KB JD OVAL HOLE $ KB JD F 1 OVAL HOLE $ KBS SCH 2 $ KB CASE IH/ JD 2 1/16 $ KB20.5-O MAC DON (OVAL HOLE) 2 1/8 $ KB MAC DON 2 1/8 $ KB P 30 6 JD 600 (PRESS IN BOLTS)1 X 4 HOLE $ SKILLKUT
5 PAGE 57 R.E. SKILLINGS SUPPLIES, INC or *Sickles Assemblies Sold Without Knife Head! Sickle Parts To Fit CNH & 3020 Heads. PART # MODEL DESCRIPTION PRICE EA. S COARSE SICKLE SECTION $ 1.20 S TIGER SHARK SICKLE SECTION $ 1.20 S /3162 XTRA COARSE SICKLE SECTION $ 1.30 S /3162 TIGER SHARK SICKLE SECTION $ 1.30 S SCH XTRA COARSE SICKLE SECTION $ 1.30 S SCH TIGER SHARK SCH SECTION $ SCH OEM COARSE SICKLE SECTION $ PRONG GUARD $ STUB GUARD $ / PRONG GUARD $ ST 3 GUARDS $ PRONG GUARD $ PRONG GUARD (HEAD 4 NEEDED) $ RH END GUARD (SINGLE PRONG) $ K HOLD DOWN (ADJUSTABLE) $ 6.50 SA *15 SICKLE ASSEMBLY $ SAC *15 SICKLE ASSEMBLY $ SA *17.5 SICKLE ASSEMBLY $ SAC *17.5 SICKLE ASSEMBLY $ SA *20 SICKLE ASSEMBLY $ SAC *20 SICKLE ASSEMBLY $ SAC *22.5 SICKLE ASSEMBLY $ SAC *25 SICKLE ASSEMBLY $ SAC *30 SICKLE ASSEMBLY (2 PC.) $ SAC *25 SICKLE ASSEMBLY CALL SAC *30 SICKLE ASSEMBLY (2 PC.) CALL SAC *35 SICKLE ASSEMBLY (2 PC.) CALL PS CUT KNIFE HEAD $ C KNIFE CONNECTR BLOCK $ C SPLICE KIT $ E WEAR PLATE $ HOLD DOWN $ CRARY SPRING HOLD DOWN $14.00SALE SPRING HIGH ARCH HOLD DOWN $15.50SALE CBS COMPLETE SICKLE SYSTEM $ CBS COMPLETE SICKLE SYSTEM $ CBS COMPLETE SICKLE SYSTEM $ GF REEL FINGER $ 1.60 P REEL FINGER HCC $ 2.30 MW SKID PLATE SET $ 329 SALE MW SKID PLATE SET $ 379 SALE MW SKID PLATE SET $ 420 SALE MW SKID PLATE SET $ 450 SALE MW SKID PLATE SET $ 490 SALE MW SKID PLATE SET $ 570 SALE MW DD 30 SKID PLATE SET (CBJ021301>) $ 930 SALE MW SKID PLATE SET(CBJ ) $ 930 SALE MW SKID PLATE SET $ 595 SALE MW SKID PLATE SET $ 675 SALE Poly Last FEED PLATE KIT MODEL PART # DESCRIPTION PRICE EA FPCK KIT COMPLETE $ SALE FPCK KIT COMPLETE $ SALE FPCK KIT COMPLETE $ SALE FPCK KIT COMPLETE $ SALE Replace Your Worn Feed Plates With Durable Poly!
6 R.E. SKILLINGS SUPPLIES, INC or PAGE- 58 SICKLE CONVERSION Easy Cut II kits are available for almost all types of combines and headers. One sectionalized knife assembly Roller guides (where possible, otherwise wear plates) All hardware The one up, one down section mounting on the knife and various options of section serrations provides for optimal cutting performance in a variety of crops. Because the knife is trapped in the Easy Cut guard, no hold downs or wear plates are required, eliminating time consuming adjustments: a source of trouble and costly replacements. Also the knife can t buckle and break between hold downs. Maintenance of the Easy Cut II system: Because only a few different parts are used, most parts are common for many platforms; worn parts are easy to exchange. It takes very little time to check the cutting system periodically for wear. All parts are available through a wide network of dealers especially during harvest. Parts are readily available year round. The advantages of the SCH Easy Cut II system: Extremely low maintenance, because no hold downs or wear plates are used, no adjustments necessary Very robust system, especially when used in wide platforms Superior cutting, even in the most difficult conditions Modular design PART # DESCRIPTION PRICE EACH SCH Coarse Section-Schumaker $ 1.60 SALE 4498SK2 USA (5 TPI) SKILLKUT SECTION! $ 1.40 Each S (3.5 TPI) TIGER SHARK SECTION $ 1.40 S (7 TPI) COARSE SECTION $ PT REGULAR SCH GUARD $ SALE PT SCH HEAD GUARD $ PT REGULAR SCH GUARD $ SASCH Piece Sickle Less Head $ SASCH Piece Sickle Less Head $ SASCH Piece Sickle Less Head $ SASCH Piece Sickle Less Head $ SASCH Piece Sickle Less Head $ KBS Knife back Only $ KBS Knife back Only $ SCH15K 15 CUTTER CONVERSION KITS W/ROLLERS $ SALE SCH20K 20 CUTTER CONVERSION KITS W/ROLLERS $ SALE SCH25K 25 CUTTER CONVERSION KITS W/ ROLLERS $ SALE SCH30K 30 CUTTER CONVERSION KITS W/ ROLLERS $ SALE SCH35K 35 CUTTER CONVERSION KITS W/ ROLLERS $ SALE TOP BRIDGE ROLLER $ BOTTOM BRIDGE ROLLER $ SKILLKUT
7 PAGE- 59 R.E. SKILLINGS SUPPLIES, INC or Custom Designed 2 Pc. Sickle For MacDon Heads Many Growers who own a MacDon Draper head have been commenting through the years about excessive bolt breakage on their sickle. Through our research we have found some common results. Due to the speed of the sickle needing to run at rpm s to maintain desired ground speed, this adds additional stress to the bolts used for the sections. Most manufacturers that run a sickle at these higher speeds use heavier bolts for their knife backs and sections. We at R.E. Skillings Supplies Inc. have come up with a sensible solution for the bolt issue. THE SKILLKUT SICKLE Benefits of Our Sickle: 6mm.(HEAVY DUTY) Diameter Section Bolts instead of smaller bolts. Oval shoulder bolt design will speed up changing a broken section. No more pounding out bolts to pull out the section. The oval shouldered bolt will simply drop out the bottom and make section change quicker. 10 long Reinforcing Straps installed under the knife head area instead of connector links. Choice of section available: Tiger Shark (super aggressive), SkillKut (Our Section Of Choice), or the Super Seven (Standard) sickle section. Redesigned Sickle Splice Kit Making Repair Simpler And Faster. *KNIFE HEAD NOT INCLUDED. Oval Shoulder Slips Into The Knife Back With Little Pressure! PART # MODEL WIDTH DESCRIPTION PRICE EA. SAMD35SD6 FD70 / SINGLE DRIVE 6MM BOLT 2PC SICKLE ASSEMBLY $ 679 SALE SAMD40SD6 FD70 / SINGLE DRIVE 6MM BOLT 2PC SICKLE ASSEMBLY $ 729 SALE S SK26 FD70 / 75 ALL SKILLKUT SECTION W/ 6MM HOLE $ 1.00 B D FD70 / 75 ALL (50 CT.)6MM X 16MM SECT. BOLT W/ NUT $ *PRICE DOES NOT INCLUDE KNIFE DRIVE HEAD! Modification to existing drive head will be necessary. SKILLKUT
8 R.E. SKILLINGS SUPPLIES, INC or PAGE- 60 Sickle Parts To Fit Mac Don / CNH All Skid Plate Kits Are Sold With Hardware. MODEL # PART # DESCRIPTION PRICE EA. ALL S TIGER SHARK BLACK SECTION (3.5 TPI) $.90 ALL S TIGER SHARK SECTION (3.5 TPI) $ 1.00 ALL S SK2 SKILLKUT SECTION (5 TPI) $.90 ALL BU215MDH 2 PRONG DOUBLE HEAT TREATED GUARD (HEAVIER THAN OEM) $ SALE ALL BU 345 HEAD GUARD $ ALL BU302 LH HEAD GUARD $ SALE ALL BU301 RH HEAD GUARD $ SALE ALL SPRING LOADED HOLD DOWN $ SALE ALL K HOLD DOWN (W/ SS BOLT) $ 8.50 D50/D60/FD70 P212 SHORT REEL FINGER $ 2.95 D50/D60/FD70 P987 LONG REEL FINGER $ 2.95 ALL P INTAKE AUGER FINGER $ 7.50 SEVERAL SAMD30SD *30 SINGLE DRIVE SICKLE $ SEVERAL SAMD35SD *35 SINGLE DRIVE SICKLE $ SEVERAL SAMD40SD *40 SINGLE DRIVE SICKLE $ SEVERAL SAMD35DD *35 DOUBLE DRIVE SICKLE $ SEVERAL SAMD40DD *40 DOUBLE DRIVE SICKLE $ ALL MD25NB 25 6 KNIFE BACK $ ALL C SECTION LINK $ 1.00 FD70 / CNH 2162 C KNIFE HEAD W/ BEARING LH $ FD70 / CNH 2162 C DOUBLE DRIVE HEAD RH $ FD70 / CNH A1 KNIFE HEAD SEAL $ 9.50 FD70 / CNH 2162 A27827 KNIFE HEAD BEARING $ FD70 / CNH A1 KNIFE HEAD LOWER PLUG $ FD70 / CNH 2162 BU338 LOWER DD GUARD CENTER $ FD70 / CNH 2162 BU4344 UPPER DD GUARD CENTER $ ALL /16 X 1 1/4 TRUSS BOLT $ 1.40 ALL /16 X 1 1/2 TRUSS BOLT $ 1.50 FD70 / CNH T COUNTER SUNK OVERLAP SECTION $ 2.95 FD70 / CNH B COUNTER SUNK OVERLAP SECTION $ 2.25 FD70 / CNH COUNTER SUNK BOLTS $ MD-30 MW SKID PLATE KIT (REAR PADS ONLY) $ 430 SALE MW SKID PLATE KIT (REAR PADS ONLY) $ 430 SALE FD70/D60/D50 MW SKID PLATE KIT (REAR PADS ONLY) $ 275 SALE FD75 / D65 /FD70 MW LEFT END SKID 11 X 15 $ SALE FD75 / D65 /FD70 MW RIGHT END SKID 11 X 15 $ SALE FD70/D60/D50 MW CENTER SKID PAD 14 X 16 $ SALE FD75 / D65 MW CENTER SKID PAD 7 X 19 $ SALE CIH MW LEFT END SKID 11 X 15 $ SALE CIH MW RIGHT END SKID 11 X 15 $ SALE CIH MW CENTER SKID PAD 14 X 16 $ SALE CIH MW SKID PLATE KIT (REAR PADS ONLY) $ 275 SALE CIH MW SKID PLATE SET $ 620 SALE CIH MW SKID PLATE SET $ 735 SALE CIH MW SKID PLATE SET $ 845 SALE CIH MW SKID PLATE SET $ 970 SALE *KNIFE HEAD NOT INCLUDED. * 6MM. OVAL SHOULDERED BOLT SICKLE ASSEMBLIES TO FIT MACDON SKILLKUT
9 PAGE 61 R. E. SKILLINGS SUPPLIES, INC or CAT CUTTER BAR PARTS PART # MODEL DESCRIPTION PRICE EA. S ALL TIGER SHARK SECTION $ 1.40 BU 209 F30-900/ 1050, PRONG GUARD $ BU 973 F30-900/ 1050,1200 HD 2 PRONG GUARD (MUST CHANGE ALL) $ ALL HOLD DOWN $ 5.25 AGCO CUTTER BAR PARTS PART # MODEL DESCRIPTION PRICE EA. S LATE COARSE SECTION $ 1.35 BU PRONG GUARD $ S SCH TIGER SHARK SECTION $ SCH PRONG SCH (BLACK) $ ALL HOLD DOWN $ 5.25 THE PADDLE TINE FOR A CHANGE! Increase your harvest in light, sparse or short soybeans. The 6 wide Paddle gives you the following advantages: 1. Increased Harvest 2. Improved Feeding 3. Cleaner Cutter Bar GENTLE FINGERS With over 6 million, patented GENTLE FINGERS in the fields, we re secure in stating we have the best designed nylon reel finger replacement available in the market place today. The patented T Bar design allows GENTLE FINGERS to bend uniformly from point of contact to the point of attachment, thereby eliminating a weak spot where the finger could bend again and again, and in time, break off during use. -Eliminates broken cutter bar parts that are the result of getting steel fingers into the sickle. -Eliminates the need for plastic tile over wooden slats since GENTLE FINGERS will not allow crop to wrap. The following GENTLE FINGERS come complete with hardware & mounting instructions: PART # DESCRIPTION PRICE A. Gentle Fingers To Fit Wood Bats $ 1.60 each TGF1038-A Box of 50 $ 1.50 each B. Flex Tines To Fit Wood Bats & MF Early U2 $ 1.60 each TGF1038 Box of 50 $ 1.50 each C. Gentle Fingers To Fit Tear Drop Bat $ 1.60 each TGF1238 Box of 50 $ 1.50 each D. Pipe Reel JD (New Style) TGF1038HCC Box of 50 $1.75 each E. LOVE TEARDROP NYLON REEL FINGERS TGF1038LOVE $ 2.10 each F. MACDON (PLEASE SPECIFY) EARLY MACDON REEL TINE LATE MACDON REEL TINE EXCELLENT PERFORMANCE IN NORMAL BEANS! $ 6.75 SALE $2.95 each AVERAGE REEL QUANTITIES ON 4.5 SPACING A. B. C. D. E.
10 R. E. SKILLINGS SUPPLIES, INC or PAGE PolyLast TROUGH LINER KITS PART# WIDTH MODEL# PRICE GPCK CASE IH $ SALE GPCK CASE IH $ SALE GPCK CASE IH $ SALE ACHC ROW / $ SALE ACHC ROW / $ SALE ACHC ROW / $ SALE ACHC ROW / $ SALE GRAIN GRABBER 2 Make Your Old Head Perform Like New With This Low Cost, Add-On, Its Like A Full-Finger Extention! *Stop Slugging And Get less Grain Shatter! Head Length Recommended # Total Cost 18 or Less 4 $ SALE 20 6 $ SALE 25 8 $ SALE $ SALE PART# WIDTH MODEL # PRICE GPJK JD $ SALE GPJK JD $ SALE GPJK JD $ SALE ACHJ643 6 ROW /693 JD $ SALE ACHJ843 8 ROW /893 JD $ SALE ACHJK ROW JD $ SALE ACHJ ROW JD $ SALE ACHJK606C30 6 ROW C JD $ SALE ACHJK608C30 8 ROW C JD $ SALE ACHJK612C30 12 ROW C JD $ SALE $ EA. SALE POLY GRAIN TANK LINERS FOR COMBINES This Poly Last Auger Liner for grain tanks covers the existing auger floor, no mater what condition it is in and provides a slippery surface to keep grain feeding into the unloading auger faster. Poly Last does not rust or corrode. C-IH Model Shown TYPE MODEL TO FIT KIT # PRICE JOHN DEERE (9400,9410,9500,9510) ALL AGTJK001 $ SALE JOHN DEERE (9550) AGTJK002 $ SALE JOHN DEERE 9600, 9610, ALL AGTJ003 $ SALE JOHN DEERE (9570 STS,9650 STS,9660 STS,9750 STS) AGTJK004 $ SALE JOHN DEERE (9660, 9670, 9760, 9770, 9860, 9870, S670, S680) HIGH UNLOAD AGTJK005 $ SALE UNIVERSAL EXAMPLES-(6620, 7720, 8820 JD (YOU CUT TO FIT YOUR SIZE.) AGTU001 $ SALE INTERNATIONAL (1420,1440,1460,1480 ALL) AGTC014 $ SALE CASE IH (1640,1660,1666,1680,1688,2166,2188,2366,2388,2588) AGTC001 $ SALE CASE IH 7010, 7120, 8010, 8120, 9120 *AGTC003 $ SALE + SHIPPING
Sickle Parts To Fit CNH & 3020 Heads.
PAGE 59 R.E. SKILLINGS SUPPLIES, INC. 937-845-8781 or 800-358-8070 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
PAGE -63 R. E. SKILLINGS SUPPLIES, INC. 937-845-8781 or 800-358-8070 PolyLast TROUGH LINER KITS PART# WIDTH MODEL# PRICE GPCK1020 20 1020 CASE IH $ 455.00 SALE GPCK1025 25 1020 CASE IH $ 555.00 SALE GPCK1030
1 AM-167/202/242/282/322 Parts Manual. Table Of Contents
AM-167/202/242/282/322 Parts Manual Table Of Contents Mower Beam with Bearings...2 Mower Beam with Bearings...4 Cutting Discs...6 Main Gearbox...8 V-Belt Pulley...10 Headstock...12 Carrier Beam...14 V-Belt
North US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183
North US 290 US 8 MLK Blvd. FM 969 ASERO Steel Sales Ben White TX IH- US 8 Hot Rolled Strip Commercial Quality A - 0 Size in Per 20 Ft. /8 x /2.2 4.26 /4.9 6.8.42 8.0 /4. 0.62 /2.68 2.6 2.80.00 2 /2.06
RL-H80 PARTS LIST # K
RL-H80 PARTS LIST # 102837K USE THIS PARTS LIST FOR: Hoist Serial Number: 2733 to For older hoists use the following: Parts List No. 102837G for Serial Number 2485 to 2732 IF YOUR HOIST DOES NOT FALL WITHIN
Feed Screeners. Model 90 Screener: Model 108 Screener: Model 125 Screener: Manufactured until 3/2002
Back Home FLEX-AUGER Repair Parts Model 90 Screener: 25895 Model 108 Screener: 34347 Model 125 Screener: 25712 Manufactured until 3/2002 25895 34347 25712 25895 34347 25712 Model 90 Model 108 Model 125
Price Each. Bulk Qty.
s subject to change without notice DeWALT SDS+ Masonry Bits Item Number Description Each Bulk Each for Bulk DW5348 BULL POINT 10" SDS+ $ 8.95 DW5350 CHISEL 3/4 X 10 SDS+ $ 8.95 DW5401B25 SDS BIT 5/32 X
Lift Up Floor Locks Multi-Directional Castor. W Series. M Series (full stainless steel) WHEELS & CASTORS
Lift Up Floor s Multi-Directional Castor K Series M Series O Series M Series (full stainless steel) W Series WHEELS & CASTORS WWW.SITECRAFT.COM.AU WHEELS & CASTORS Lift Up Floor s Used on warehouse trolleys,
AFTERMARKET NEW PARTS PART NUMBER: WN-137828A1 $9.00 FEATURES: Light, Cab, Halogen, Front Cab Roof Bulb, 65 Watt APPLICATIONS: 2144, 2166, 2188, 2344, 2366, 2377, 2388, 2577, 2588, 2155, 2555, CPX420,
Ripper Points. Section com. Norwest Manufactured. Multi-Piece Ripper Points for 1-1/4 DMI s
Section 600 Ripper Points Norwest Manufactured Ripper Points Multi-Piece Ripper Points for 1-1/2 DMI s Multi-Piece Ripper Points for 1-1/4 DMI s Ripper Shanks & Chrome Shin Guards Multi-Piece Ripper Points
Turf Parts TILLER PARTS. MOWER PARTS. PERformance
AERATOR PARTS Part # AE10 Tine, lock washer & nut Replaces Aera-Vator AE50-058 (tine) HW32020682P (lock washer), HW20020G5PLF (nut) $5.50 ea. or $4.95 ea. for 90 or more TILLER PARTS Part # AE101 Tine
Members: Sponsor: Dalton Hamilton Preston-Eastin Levi Edens Kenneth Mui Brice Abbott
Members: Dalton Hamilton Levi Edens Brice Abbott Sponsor: Preston-Eastin Kenneth Mui Mission Statement Wolf Pack Engineering strives to provide our customer with innovative solutions. We take a cost effective
Assembly and Setup Manual
M-12 Series Copyboard / C-12 Series Captureboard Assembly and Setup Manual This is the installation and assembly manual for the M-12 series Copyboard and C-12 series Captureboard. (The copyboard and/or
CROP LIFTER APPLICATION GUIDE
AGCO Gleaner 300 AGCO Gleaner 400 AGCO Gleaner 500 AGCO Gleaner 700 AGCO Gleaner 800 AGCO Gleaner 7000 AGCO Gleaner 8000 AGCO Gleaner 8200 AGCO Gleaner 9250 AGCO Gleaner Series 3 Allis Chalmers 829 49235
812A Combine Header Adapter Marketing Bulletin 12 October 2017
812A Combine Header Adapter Marketing Bulletin 12 October 2017 The 812A Combine Header Adapter is now available from RCI Engineering for the John Deere 8000-Series Self-Propelled Forage Harvesters. Intended
Pronto Air Personal Transporter
Parts Catalog Issued: Sep 20, 2018 Pronto Air Personal Transporter with MyBody Seating Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog
John Deere. MODEL: 510 Round Baler JD-P-PC1599
John Deere MODEL: 510 Round Baler THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY
Prime Railway Services Radial Door - Order Form
Radial Door - Order Form Prime Part # 1130 Customer/Location: Tel: Fax: Quantity: Door ID#: Door Type: Tri Bi Door Location: BR BL AR AL BL Doors Only: Sliding Door or Pan Exterior Door Colour Red Yellow
WORKSHOP EQUIPMENT. Engineers Stud. Flanged Nut. T-Slot Nut. Step Block. Extension Nut. Step Clamp
GROUP Indexa T-Slot Clamping Kits Designed to save set up time and solve most T-Slot clamping problems. All components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel, heat treated
CHARLY NO-LIMIT INSTALLATION
CHARLY NO-LIMIT INSTALLATION Start by pulling the chin strap out of the ear pad. Then fold the ear pad back to the outside of the helmet. Use a piece of masking tape or painter s tape to hold these parts
PowerFlex 755 Transition Section and Splicing Kit for Floormount Drives and CENTERLINE 2100 Motor Control Centers
Installation Instructions PowerFlex 755 Transition Section and Splicing Kit for Floormount Drives and CENTERLINE 2100 Motor Control Centers Topic Page Introduction, Compatibility 1 Additional Resources
Written By: Brett Hartt
Yellow Light of Death Repair Fix consoles plagued with the infamous "Yellow Light of Death". Written By: Brett Hartt ifixit CC BY-NC-SA www.ifixit.com Page 1 of 32 INTRODUCTION [video: http://www.youtube.com/watch?v=umg-6rbanly]
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE
8B CROP LIFTER APPLICATION GUIDE
CROP LIFTER APPLICATION GUIDE AGCO Gleaner 300 AGCO Gleaner 400 AGCO Gleaner 500 AGCO Gleaner 700 AGCO Gleaner 800 AGCO Gleaner 7000 AGCO Gleaner 8000 AGCO Gleaner 8200 AGCO Gleaner 9250 AGCO Gleaner Series
Ag Leader Technology Insight. Direct Command Installation Spra-Coupe 7000 Series
Note: Indented items indicate parts included in an assembly listed above. Part Name / Description Part Number Quantity Direct Command Spra-Coupe 7000 Kit 4100531 1 Liquid Product Control Module 4000394
TUB / SINK TUB SPOUT TUB SPOUT TUB SPOUT CHROME - DIE CAST CHROME PLATED ZINC BODY. TAPPED 1/2" IPS TUB SPOUT TUB SPOUT TUB SPOUT TUB SPOUT TUB SPOUT
ADJUSTABLE SLIDE CONNECTOR BATH SPOUT. PLATED ZAMAK, 1-3/4" ADJUSTABLE TELESCOPING FIT. FAST INSTALLATION FOR 1/2" COPPER STUB. Part #: Finish: 18-225 Chrome 18-340 Brushed Nickel DIE CAST CHROME PLATED
TECHKNOW, INC. Kiosk Order Confirmation System INSTALLATION MANUAL. Revision Date: July 11, 2012 Part # Version 3.2
document Page 1 of 18 TECHKNOW, INC Kiosk Order Confirmation System INSTALLATION MANUAL Revision Date: July 11, 2012 Part # Version 3.2 Techknow, Inc. 393 Mayfield Road Duncan, SC 29334 www.gotechknow.com
50 LANGSTON. REPLACEMENT KNIVES & Accessories. Knife Guarantee FEATURING FOR A FULL LIST OF ZENITH PRODUCTS, CALL
50 LANGSTON REPLACEMENT KNIVES & Accessories FEATURING Knife Guarantee *Langston is a registered trademark Sun Automation Group. FOR A FULL LIST OF ZENITH PRODUCTS, CALL 800-223-5202 50 LANGSTON REPLACEMENT
SW900 Parts list. 08/2013 Revised 01/2018 (C) FORM NO
SW900 Parts list 08/2013 Revised 01/2018 (C) FORM NO. 1465375000 Model No.: 9084112010 PARTS LIST TABLE OF CONTENTS GENERAL VIEW... 2 CHASSIS SYSTEM... 4 FRAME SYSTEM... 6 SKIRT SYSTEM... 8 COVERS SYSTEM...
QUICK REFERENCE PARTS HAND BOOK
QUICK REFERENCE PARTS HAND BOOK KEY GENUINE AND AFTERMARKET PARTS FOR GREGOIRE AND VINESTAR / URM GRAPE HARVESTERS 7th EDITION 2018 SEASON PFG Australia Pty Ltd CONTENTS 05 BUSHING 07 RODS / ATTACHMENTS
FLEXIMARK Cable Marking Systems
Custom Plastic Marking Systems 598 UNITRONIC Bus Cables & Connectors MINI/MAXI Plastic Marking Systems 599 Print-Your-Own Plastic Marking Systems 607 Custom Stainless Steel Marking Systems 610 Stainless
DirectCommand Installation Case/Flexi-Coil/New Holland Air Cart Kit (Variable Rate Electro Hydraulic Systems) Ag Leader Technology
Part Name/Description Part Number Quantity Flexi-Coil Air Seeder Kit 4100889 1 Generic Cable Installation Kit 2000901-1 1 Hardware Kit Large Module 2001354-1 1 Deutsch Dust Plug 8-pin 2002899-8 1 Quick
Sno-Thro. Parts Manual. Models (SS522EC) (SS722EC) (SS522) (SS522EC) (SS722C) /06 Printed in USA
Sno-Thro Parts Manual Models 801 (SSEC) 8018 (SSEC) 801 (SS) 8 (SSEC) 80 (SSC) 0000 /0 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit.
STANDS Speaker Television. All-Steel Speaker Stand SS7725B (page 82)
STANDS Speaker Television SS8800B+ Power Crank-Up Speaker Stand 80 (page 82) All-Steel Speaker Stand SS7725B 1 2 4 7 1 Cl assic Speaker Stand SS7730B 1 0 6 4 9 Upper Shaft Tubing: 1.375"or 1.5" Upper Shaft
roller shutters ALUMINIUM ROLLER SHUTTERS FOR SPECIAL VEHICLES
roller shutters ALUMINIUM ROLLER SHUTTERS FOR SPECIAL VEHICLES ROLLER SHUTTERS INTRODUCTION The main target of company SRS is to offer competence and reliability to the customers in the production of aluminium
TB25ET 41ADT2EC966 Page 1 of 7 Boom and Trimmer Parts
TB25ET 41ADT2EC966 Page 1 of 7 Boom and Trimmer Parts TB25ET 41ADT2EC966 Page 2 of 7 Boom and Trimmer Parts 1 753-04118 1 Throttle Housing Assembly (includes 2-5) 2 791-00041 1 Throttle Trigger Lock-Out
SECTION 1 STRAIGHT PLOWS
SKID STR STRAIGHT SNOWPLOW S STION STRAIGHT PLOWS MODLS:,, 80, 80, 8 PAG PAG PAG PAG PAG PAG PAG 8 MOLDBOARD ASSMBLIS FRAM ASSMBLY / X 0 HYDRAULI YLINDR POLY SNOW DFLTOR KIT RUBBR SNOW DFLTOR KIT SNOW
060-Hardware. Clamps and Brackets Hose Clamps
Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"
Original - Parts. Parts Bulletin. May 2016
Original - Parts Parts Bulletin May 2016 New automatic control for top lifters Automatic control for side steering For the 2016 season, ASA-LIFT launches a new and improved system for automatic side steering
Goldberg Brothers, Inc.
Goldberg Barn Standard Hardware Sets Complete Less (400lb limit) Top Mount Set (100lb limit) Denotes Stocking Product Designer Colors ( PC Chrome, Rocket White, Regal Red, Blue Ribbon, Silver Vein, Copper
dia. grit type R type S eblend surface conditioning disc
QUICK CHANGE Discs blend Mini E Quick Change Flap Discs The Mini E flap discs are manufactured using the best zirconia abrasive on a heavy cloth backing. Mini E discs features a quick change system using
STAKE POCKET AND RAIL CLAMP LAYOUT (6302 & 6314) - PAGE 1 B - End 6302 A - End 6302 Centerline of stake pockets
STAKE POCKET AND RAIL CLAMP LAYOUT (6302 & 6314) - PAGE 1 B - End 6302 A - End 6302 Centerline of stake pockets ( Typical D&RGW cast stake pocket) 40 over the end sills 2-11 6-4 9-9 13-2 16-7 20-0 20-0
Sno-Thro. Parts Manual. Models ST8526LE ST8526LE A 9/04 Printed in USA
Sno-Thro Parts Manual Models 0 - STLE 0 - STLE 0000A /0 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you
31AE9P6J590 SB-945 (2005-2) Page 1 of 16 Auger Assembly
31AE9P6J590 SB-945 (2005-2) Page 1 of 16 Auger Assembly 31AE9P6J590 SB-945 (2005-2) Page 2 of 16 Auger Assembly 1 712-0717 1 Nut Insert 3/8-16 UNC 2 712-04063 1 /P Hex Flg. L-Nut 5/16-18 Gr. F Nylon 3
WIRE AND CABLE MANAGEMENT
Wire and Cable Management Solutions A variety of items are available for managing and organizing wire and cable in common systems and cabinet environments. From cable rack, auxiliary framing to network
onlinecomponents.com
0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The use of a back lock mechanism enables a 3.15 mm (with lever) low profile design.
Ideal protection for your electrics: häwa cable ducts
Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in
Hydraulic Remote Controllers Build Program. Bulletin HY /US
Hydraulic Remote Controllers Joysticks Stackables Foot Pedals PCL401 PCL402 PCL402 Bulletin HY14-1800/US Bulletin HY14-1800/US Contents Introduction... 3 PCL401 Joysticks... 4 PCL402 Stackables...4-5 PCL402
DirectCommand Installation RoGator Model Year Ag Leader Technology
Note: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Direct Command Kit 4100801 1 Dual Lock 2000052-9 1 Dual Lock 2000053-9 1 Quick Reference
Written By: Walter Galan
PlayStation 3 Motherboard Replacement Replace your PS3's motherboard. Written By: Walter Galan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 24 INTRODUCTION Use this guide to replace a blown motherboard.
SECTION 1 STRAIGHT PLOWS
SKID STR STRAIGHT SNOWPLOW S STION STRAIGHT PLOWS MODLS:,, 0, 0 PAG PAG PAG PAG PAG PAG PAG MOLDBOARD ASSMBLIS MODLS:,, 0, 0 FRAM ASSMBLY MODLS:,, 0, 0 / X 0 HYDRAULI YLINDR POLY SNOW DFLTOR KIT RUBBR
Assembly and Setup Manual
M-11 Series Copyboard/C-11 Series Captureboard Assembly and Setup Manual This is the installation and assembly manual for the M-11 series/c-11 series. To the Customer Specialized techniques are required
72 Heavy Duty Dual Trim Deck Parts Manual
2 Heavy Duty Dual Trim Deck Parts Manual Hustler Turf Equipment P.O. Box 000 Hesston, Kansas 02-209 02999 Rev 8/0 Table of Contents Chapter General Information.................................... - Chapter
Integrated Valvejet 18 Dot Print Head. What am I getting? What are the improvements?
Integrated Valvejet 18 Dot Print Head What am I getting? What are the improvements? Diagraph is proud to release the new IV18 Dot print head. New features include: Environmentally Sealed housing for harsh
Encore XT Manual Gun Upgrade Kit
Instruction Sheet P/N 1600823-01 Encore XT Manual Gun Upgrade Kit 1600834 Introduction Follow these instructions to upgrade your Encore manual spray gun to the improved design of the Encore XT spray gun.
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL DX SERIES SNOW PLOW FOR SERIES SNOW PLOWS SERIAL NUMBERS AFTER DX0000 00 Sno-Way International 0G TABLE OF CONTENTS Page HYDRAULIC SYSTEM (DX)... POWER PACK FRAME... 3 BLADES... LIFT
Security Seals, Scaffolding and Transit Protection
Security Seals, Scaffolding and Transit Protection Security Seals 68-70 Transit Protection 71-73 Scaffolding Safety 74-75 67 Quote / sample / order online Smooth Grips SR 1153 Smooth strap allows easy
Required Tools. Ford Transit Connect J4075 with R16 Tracks TRANSIT CONNECT 69 RAIL IBI. Marker. 7/16 / 9/16 / 1/2 Wrench.
IBI Required Tools INSTRUCTION MANUAL Marker 7/16 / 9/16 / 1/2 Wrench Drill with 3/8 Drill Bit Allen Key Ford Transit Connect J075 with R16 Tracks Part # J075 Rails 96 Bars 55 [ ] BLACK WHITE SILVER [
Stainless Steel Hatch Fasteners Page
Izerwaren numbers Stainless Steel Hatch Fasteners Page -4-3-0-0 hatch fasteners, flush type with separate key sea water resistant - leak proof finish: rolled Installation: Drill hole: 22.5 mm Ø / 7/8 Back
DYNAVISION D2 TM INSTALLATION MANUAL
DYNAVISION D2 TM INSTALLATION MANUAL Rev 12 Dynavision International 8800 Global Way, West Chester, Ohio 45069 USA EMAIL:info@dynavisiond2.com, WEBSITE: www.dynavisiond2.com, FAX: (905) 294-6327 Unpacking
Small Circular Connector. JN1/JN2 Series. Cap
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Small Circular Connector JN1/JN2 Series CONNECTOR MB-0054-10 June 2012 Angle Plug [JN1] [JN2] [JN1] [JN2] Straight Plug Cable Connecting Individual Plug
HARDWARE SYSTEM FOR WINDOWS AND DOORS. Modular system of fittings for shutters
HARDWARE SYSTEM FOR WINDOWS AND DOORS Modular system of fittings for shutters Added strength to tradition The shutter is more than a mere screen that shuts out the light and protects from the weather.
STANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
2-Type Series Pressurized Closures
2-Type Series Pressurized Closures A complete pressure tight reenterable closure system for enclosing spliced connections of communications cables in a wide variety of applications. The 2-type Closure
Section 1 Specialty Profiles
Contents Basic Series 17-31 Section 1 Basic & Specialty Specialty 32x18 Frame 45-46 & End Caps 30 Series 32-35 Door Rolling Door Guide 47 Sliding Door Guide 48 28 Series 36- Panel Stiffener/Handle 49 Panel
3M I/O Connector Mounting Options and Hardware
M I/O Connector Mounting Options and Hardware Hardware Guide Date Modified: July 20, 2009 Part Number Type Mounting Hardware Applications - Table 1 Mini D Ribbon (MDR) Conn. s D Sub Conn. s D Ribbon Conn.
Items Dimension(WxDxH) Max.Capacity Mounting P-FDB8 181X45X207mm 8 ports & splice Pole/Wall P-FDB16 220x80x300mm 16 ports & splice Pole/Wall
P-FDB General Features Available in 2 sizes, P-FDB8 and P-FDB16 Can accommodate 1x8 / 1X16 PLC splitters and 8 / 16 SC adapters Ultra violet resistant and waterproof Wall and pole mountable 2 inlet ports,
imac Intel 27" EMC 2639 Hard Drive
imac Intel 27" EMC 2639 Hard Drive Replacement Replace the Hard Drive in your imac Intel 27" EMC 2639. Written By: Walter Galan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 26 INTRODUCTION Replacing the
PARTS MANUAL MODEL 1750-C
PARTS MANUAL MODEL 70-C Covers Serial Number Range: -L-7TCWY-0 Through SOLD & SERVICED BY Page 70-C Center hopper & &0 7& 7. Push beam... 0 00. Push beam bolt... 00 0. Push rollers (x)... 0 0077. Push
POLE DISPLAY SOLUTIONS & ACCESSORIES
& ACCESSORIES Pole Display Solutions Litho poles and bases are an excellent and versatile way to highlight a message. Pole dimensions are in lengths from two to six feet and 1 to 1-3/4 inch diameters.
INTRODUCTION Thank you for purchasing a Maurer grain tank extension. Proper care and use will result in many years of service. WARNING: TO AVOID PERSO
08--202 8E00004,Rev. AA Combine Grain Tank Extension JOHN DEERE XL EXTENSION OPERATORS / ASSEMBLY MANUAL FITS: ALL S680 & S690 COMBINES PLACE IN COMBINE CAB AFTER ASSEMBLY FOR FUTURE REFERENCE. ASSEMBLY
INSTALLATION / OPERATION MANUAL CASE-IH 2600, 4200, & 4400
w w w. S t a l k S t r y k e r. c o m INSTALLATION / OPERATION MANUAL CASE-IH 2600, 4200, & 4400 INTRODUCTION IMPORTANT: Read through this instruction manual thoroughly and familiarize yourself with the
TDM To MiniMech conversion ProceDure
TDM To MiniMech conversion ProceDure (Model 9100 ATM) TDN 07102-00079 Apr 1 2009 CorporATe HeAdquArTers: 522 E. Railroad Street Long Beach, MS 39560 PHONE: (228) 868-1317 FAX: (228) 868-0437 COPYRIGHT
PERFECT HANDLING. PCB Front Panels & Injector/Extractor Handles... Package Your Electronics With Ripac.
Front Panels & Injector/Extractor Handles... PERFECT HANDLING. Package Your Electronics With Ripac. When it comes to electronics, no one handles today s demanding applications better than Rittal Ripac
AIR CONDITIONING PRODUCTS COMPANY
Quality Products for Air Movement Equipment AIR CONDITIONING PRODUCTS COMPANY all Shutter Backdraft Damper Ceiling Shutter Motorized Damper Fixed Louver Ga le Shutter Drainable Louver Supply Damper Fiberglass
H Manual Stretch Wrap Machine uline.com FILM ROLL CAPACITY TECHNICAL DATA ELECTRICAL SPECIFICATIONS TURNTABLE SPECIFICATIONS
H-2304 Manual Stretch Wrap Machine 1-800-295-5510 uline.com SYSTEM SpecificationS IMPORTANT! Read this manual thoroughly and familiarize yourself with ALL controls and operating features. Keep this manual
FLEXBOX. Installation Guide
FLEXBOX Installation Guide FLEXBOX 1 Important Safety Instructions WEIGHT LIMIT MAXIMUM WEIGHT 50 LBS. THE STRUCTURE TO WHICH THE BOX IS MOUNTED (CEIL- ING, WALL, TABLE, POLE) MUST BE ABLE TO SUPPORT FIVE
Pixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com US: 96.524.8242 CAN: 59.885.5775 Product Diversity
Close-coupled centrifugal pumps
CombiBloc Close-coupled centrifugal pumps CombiBloc CombiBloc is the premier solution for pumping clean thin liquids in a very cost-effective way. The pump is part of Johnson Pump s Combi-system, a modular
Replacement Keyswitch Assembly
Installation Instructions Replacement Keyswitch Assembly (Catalog No. 2711E-NKSW1) Applicable Terminals Use this replacement keyswitch with PanelView Terminals 2711-KA1, -KC1, -TA1, -TC1, -TA4, -TC4 and
Pixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com S: 96.524.8242 CAN: 59.885.5775 Product Diversity
SECTION N -- ELECTROSTATIC DISCHARGE (ESD)
INSTALLATION REQUIREMENTS AT&T January, 2012 Section N, ATT-TP-76300 Revised NA SECTION N -- ELECTROSTATIC DISCHARGE (ESD) CONTENTS PAGE 1. GENERAL... N-1 1.1. Introduction... N-1 1.2. General Requirements...
Timken Lubrication Delivery Systems. Friction management solutions SM to keep systems running smoothly
Timken Lubrication Delivery Systems Friction management solutions SM to keep systems running smoothly G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication
with the Yield Monitoring System Quick Reference Card
with the Yield Monitoring System Quick Reference Card Run screen When the Yield Monitoring plugin has been activated on the FmX integrated display, the Run screen appears. c j i d e f g h Item Description
CI/SfB 62 (x) Publication No Quick Fit Floor Service Outlet Boxes & Grommets
CI/SfB 62 (x) Publication No. 010702 Quick Fit Floor Service Outlet Boxes & Grommets Quick fit 2, 3 and 4 compartment floor service outlet boxes Electrak has produced the Quick Fit Floor Service Outlet
Adjust-O Magnet Squares
Adjust-O Magnet Squares The original magnet squares featuring On/Off switches. Patent No. US 7,009,480 B2 Adjust-O Magnet Squares The On/Off switch HEAVY DUTY HEAVY DUTY MSA45 MSA48-HD MSA53-HD Multiple
ROVI EXPANDING COLLETS
ROVI EXPANDING COLLETS For 5C, 16C and 3J Spindles and Fixtures Diameters of.065" through 6" 800-423-5145 Expanding Collet Accessories Rovi Reworking Tools Plus Mini Collet Turning Ring Reworking Sleeve
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL V-BOX SPREADER POLY DUAL ELECTRIC MODEL PDE00 - / CUBIC YARD MODEL PDE00 - / CUBIC YARD MODEL PDE800 - CUBIC YARD SPREADERS WITH SERIAL NUMBERS AFTER: PDE0000, PDE0000, 8PDE0000 CHUTES
PARTS DESCRIPTION LISTING
PARTS DESCRIPTION LISTING Form 4-157e, 11-09 Sheet 2 of 6 Index No. Part Number Description A 16-889-1 TUBE ASSEMBLY, CAMERA SUPPORT CM (See Sheet 5) B 69-1063-1 COVER, ASSEMBLY BACK DSP600 (See Sheet
Assembly Manual for Mobile X-ray
Suitable for Kodak 2000, Kodak 2100, Kodak 2200 and Trophy Elytis - 12 th January 2011 William Green Page 1 of 8 Printed 12/01/2011, 2:07:42 PM Mobile X-ray Parts List 1. 6 x M10 x 65mm UNB CAP Bolts 2.
INDOOR BANNER STANDS
INDOOR BANNER STANDS Also known in the industry as roll-up banner stands, our premium offering of retractable banner stands provides a high-impact solution for trade show booths, retail promotions, sales
Integrated Valvejet 9 Dot Print Head
Integrated Valvejet 9 Dot Print Head What am I getting? What are the improvements? Diagraph is proud to release the new IV9 Dot print head. New features include: Environmentally Sealed housing for harsh
MK-101 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-0 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below. The Serial
l ADHESIVE TAPES l SIAT machines 36 / 37 Printed adhesive tape 38 Plain tape, printed tape, technical tape 39 Dispensers and staplers 39
l ADHESIVE TAPES l From standard to technical products, our range of adhesives is designed to meet most requirements. There is a product for every purpose and your advisor will help you find it. We can
INSTALLATION INSTRUCTIONS
Design and Assembly Envisor components are designed to function as an Equipment Screening System. Modular by Design allows for a more user-friendly installation. This instruction packet is intended to
Sno-Thro. Parts Manual. Models ST824E ST1027LE ST1130DLE ST924DLE ST824E ST1027LE
Sno-Thro Parts Manual Models 00 - STE 00 - ST0LE 00 - ST0DLE 00 - STDLE 00 - STE 0 - ST0LE 00000 /0 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied
Roller Shutter Door Kits. Diversity in profiles
Roller Shutter Door Kits - fast online configuration - certified according to DIN EN 13241-1 - high quality components - everything from one source Diversity in profiles Roller shutter door kits Configuration
Online version - not for reprint
(0) A Crankcase, Cylinder... X Tools, Extras... B Rewind starter... C Rewind starter ErgoStart... D Muffler... E Ignition system, Clutch... F Engine housing (Wrap around handle)... G Engine housing (Wrap
FPC connectors (0.2mm pitch) Back lock
0.9 AYF21 For FPC FPC connectors (0.2mm pitch) Back lock Y2B Series New FEATURES 1. Slim and low profile design (Pitch: 0.2 mm) 0.2 mm pitch back lock design and the slim body with a 3.15 mm depth (with
Tel / (USA & CANADA) /
MACHINE SHOP DISCOUNT SUPPLY Tel 0.. / 00..0 (USA & CANADA) / Email sales@msdiscounttool.com FRACTIONAL SIZES STRAIGHT SHANK SERIES 0: STRAIGHT FLUTE SERIES : SPIRAL FLUTE (RH) Straight Flute Spiral Flute