Setup Guide Printer P/N

Transcription

1 7422 Setup Guide 7421 Printer P/N

2 Intermec Technologies Corporation th Avenue West P.O. Box 4280 Everett, WA U.S. technical and service support: U.S. media supplies ordering information: Canadian technical and service support: Canadian media supplies ordering information: Outside U.S. and Canada: Contact your local Intermec service supplier. The information contained herein is proprietary and is provided solely for the purpose of allowing customers to operate and/or service Intermec manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec. Information and specifications in this manual are subject to change without notice by Intermec Technologies Corporation All Rights Reserved The word Intermec, the Intermec logo, JANUS, IRL, TRAKKER, Duratherm, Precision Print, PrintSet, Virtual Wedge, and CrossBar are trademarks of Intermec Corporation. Throughout this manual, trademarked names may be used. Rather than put a trademark ( or ) symbol in every occurrence of a trademarked name, we state that we are using the names only in an editorial fashion, and to the benefit of the trademark owner, with no intention of infringement. Electrical Rating x20v; 2,5A Caractéristique électriques x20v; 2,5A Elektrische Leistung x20v; 2,5A Capacità nominale x20v; 2,5A Información eléctrica x20v; 2,5A Especificações elétricas x20v; 2,5A x20v; 2,5A

3 7422 Unpacking the Printer Déballage de l imprimante Auspacken des Druckers Disimballaggio della stampante Desembalaje de la impresora Desembalar a impressora 7421S.001 1

4 Serail Cable Connecting the Printer Connexion de l imprimante Anschließen des Druckers Collegamento della stampante Conexión de la impresora Conectar a impressora or ou oder o o ou 7421S.002 Serial Cable Câble série Serieller Anschluß Cavo seriale Cable serial Cabo serial Parallel Cable Câble parallèle Paralleler Anschluß Cavo parallelo Cable paralelo Cabo paralelo 2

5 Loading Media Chargement du support Laden von Medien Caricamento dei supporti Carga de etiquetas Carregar mídia S S S S

6 INTERMEC 7421 Printer S S Program Version : Pages Defined : 0 Formats Defined : 0, 4, 6 Fonts Defined : 0, 1, 2, 7, 20, 21, 22, 23, 24, Graphics Defined : 1 PRINT SPEED - 2 ips RIBBON SAVE - Diabled IMAGE BANDS - 6 SELF STRIP - Disabled MAX LABEL LENGTH - inches CUTTER - Disabled LABEL STOCK - Inter - label gap DARK ADJUST - 0 MEDIA TYPE - Direct Thermal X FORMS ADJUST - 0 MEDIA LENGTH - 0 inches Y FORMS ADJUST - 10 CHARACTER SET - US ASCII LABEL REST POINT - 0 TRANSLATION - Disabled SENSITIVITY EMULATION - Disabled LABEL RETRACT - Enabled BAUD RATE DATA BITS - 7 MESSAGE LENGTH PARITY - Even STOP BITS - 1 PROTOCOL - Xon/Xoff DEVICE ADDRESS - A INTERNAL OPTIONS - none EXTERNAL OPTIONS - Self Strip 7421S S

7 S S Hardware Configuration Memory Installed Storage RAM Image RAM : 120 kilobytes : 134 kilobytes 5 4" (102mm) Mileage Inches Processed Inches Burned Labels Cut : 600 : 221 : 0 Printhead Width Dot Size Burn Pot Setting : 832 dots : 5.0 mil : 0 Hardware Options I/O Option Internal Option External Option : Centronix : none : Self Strip Firmware Checksum ROM0 (U9) ROM1 (U8) Program Version : 7BB9 : 2148 : : S.036 <3.9" (99mm) 7421S

8 6 Printing the Test Labels Impression des étiquettes de test Drucken der Testetiketten Stampa delle etichette di prova Impresión de etiquetas de prueba Imprimir as etiquetas de teste 7421S S S

9 S S S S

10 S S S S

11 S S S

12 Loading Thermal Transfer Ribbon and Media Chargement du ruban de transfert thermique et du support Laden von Thermotransfer-Farbband und -Medien Caricamento di supporti e nastri termografici Carga de etiquetas y cinta de transferencia térmica Carregar mídia e fita de transferência térmica 10 4" (102mm) SENSITIVITY NUMBER 5 7 <3.9" (99 mm) 7421S S S S

13 S S S S

14 S S S S