GOVERNMENT OF ASSAM. JORHAT : , ASSAM Ph : INVITATION FOR QUOTATION. TEQIP-III/2019/jejc/Shopping/20

Transcription

1 GOVERNMENT OF ASSAM OFFICE OF THE PRINCIPAL ::: JORHAT ENGINEERING COLLEGE JORHAT : , ASSAM Ph : INVITATION FOR QUOTATION TEQIP-III/2019/jejc/Shopping/20 18-Jan-2019 To,.. Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation for the following goods with item wise detailed specifications given at Annexure I, Sr. No Brief Description Quantity Delivery Period(In days) Place of Delivery Installation Requirement (if any) 1 Keil PK51 Professional Developer s Kit based Microprocessor Trainer along with /8088 based, advanced Microprocessor Trainer 4 Keil PK51 Professional Developer s Kit Electrical Engineering Department, Jorhat Electrical Engineering Department, Jorhat Electrical Engineering Department, Jorhat 1 30 Electrical Engineering Department, Jorhat Yes Yes Yes Yes Package Code : TEQIP-III/AS/jejc/76 Page 1

2 2. Government of India has received a credit from the International Development Association (IDA) towards the cost of the Technical Education Quality Improvement Programme[TEQIP]- Phase III Project and intends to apply part of the proceeds of this credit to eligible payments under the contract for which this invitation for quotations is issued. 3. Quotation, 3.1 The contract shall be for the full quantity as described above. 3.2 Corrections, if any, shall be made by crossing out, initialing, dating and re writing. 3.3 All duties and other levies payable by the supplier under the contract shall be included in the unit price. 3.4 Applicable taxes shall be quoted separately for all items. 3.5 The prices quoted by the bidder shall be fixed for the duration of the contract and shall not be subject to adjustment on any account. 3.6 The Prices should be quoted in Indian Rupees only. 4. Each bidder shall submit only one quotation. 5. Quotation shall remain valid for a period not less than 45 days after the last date of quotation submission. 6. Evaluation of Quotations, The Purchaser will evaluate and compare the quotations determined to be substantially responsive i.e. which 6.1 are properly signed ; and 6.2 confirm to the terms and conditions, and specifications. 7. The Quotations would be evaluated for all items together. 8. Award of contract: The Purchaser will award the contract to the bidder whose quotation has been determined to be substantially responsive and who has offered the lowest evaluated quotation price. 8.1 Notwithstanding the above, the Purchaser reserves the right to accept or reject any quotations and to cancel the bidding process and reject all quotations at any time prior to the award of contract. 8.2 The bidder whose bid is accepted will be notified of the award of contract by the Purchaser prior to expiration of the quotation validity period. The terms of the accepted offer shall be incorporated in the purchase order. 9. Payment shall be made in Indian Rupees as follows: Package Code : TEQIP-III/AS/jejc/76 Page 2

3 Satisfactory Acceptance - 100% of total cost 10. All supplied items are under warranty of 12 months from the date of successful acceptance of items. 11. You are requested to provide your offer latest by 11:00 hours on 08-Feb Detailed specifications of the items are at Annexure I. 13. Training Clause (if any) At least one day training to the technical staff and faculty of Jorhat 14. Testing/Installation Clause (if any) Equipment must be tested and installed at Electrical Engineering Department, Jorhat 15. Information brochures/ Product catalogue, if any must be accompanied with the quotation clearly indicating the model quoted for. 16. Copy of GST certificate must be accompanied with the quotation. 17. Purchase order copy (last two years) of similar types of equipments to any institution must be accompanied with the quotation. 18. Sealed quotation to be submitted/ delivered at the address mentioned below, TEQIP-III Office of the Principal Jorhat Garmur Jorhat Assam 17. We look forward to receiving your quotation and thank you for your interest in this project. (Authorized Signatory) Name & Designation Dr. Reeta Sarmah Principal, Jorhat Jorhat Package Code : TEQIP-III/AS/jejc/76 Page 3

4 Annexure I Item Name Item Description/ Specification 8085 based Microprocessor Trainer along with power supply and RS232C to USB Converter with USB (A-B) cable This trainer kit should operate on SINGLE +5V power supply in onboard keypad mode or from host PC through RS-232-C interface. In both stand alone and serial modes, user should be able to enter programs, run them at full speed and debug them through breakpoint and single step facilities. The system should allow program editing through INSERT, DELETE and BLOCK MOVE commands. The system should allow direct read/write from/to a specified I/O port through IN BYTE and OUT BYTE commands. It should have four onboard ribbon cable connectors for easy expansion and two user defined function keys. Must have Onboard battery backup for RAM and onboard Adapter (SMPS) for +5V@ 3A, ma, and ma Should have Built in Text editor, Assembler and Disassembler facilities in serial mode. It should support many types of interfaces which are common for all the trainers for training purpose: Keyboard, Elevator, Display, ADC with DAC, Dual DAC, Logic Controller, Traffic Lights, 8253 Demo, RTC, Tone Generator, Stepper Motor, Numeric Printer, 8 bit - 16 Channel ADC, 12 bit - 16 Channel ADC, Opto Isolated Input, Opto Isolated Output, LCD interface, Relay Output, DC Motor Interface, RTD Temperature Controller interface, etc. Study Cards for 8255, 8279, 8259, 8251, 8253, etc. Cycle Step Interface. 16K Bytes EPROM Programmer Interface to program 2716 through K Bytes EEPROM Programmer. 16K Bytes Flash Memory Programmer. Audio Tape Interface. CPU : 8085 operated at MHz. MEMORY : Three 28 pin JEDEC sockets offer 64K Bytes of memory as in the following configuration. ROM : 16K Bytes of monitor program in EPROM. ROM / RAM : 16K Bytes using EPROM, EAROM or SRAM interchangeably. RAM : 32K Bytes supplied using CMOS static RAM with battery backup. Peripherals: 8255 : (Two Nos): User can have total of 48 I/O lines : 3 programmable interval timers - Timer 0 is used for implementing single step facility, Timer 1 is used for generating baud clock and Timer 2 is available to the user : For serial communication. Supports all standard bauds from 110 to : To Control 32 keys keyboard and 6-digit, half-inch size, seven segment LED display. Parellel I/O: 48 TTL compatible lines (2x8255) brought out through two 26 pin ribbon cable connectors. Serial I/O : RS-232-C serial interface signals through onboard 9 pin D type female connector. INTERRUPTS : All interrupts except TRAP should be available to user. If single step function is not used, TRAP should also be available to the user. Bus Expansion : Fully de-multiplexed and buffered TTL compatible bus signals brought out through two 26 pin ribbon cable connectors for expansion. DIMENSIONS : LxBxH : 365 x 275 x 55 mm Approx. Weight : 1300 gms Approx. Housed in an ABS Plastic moulded cabinet Trainer should be supplied with the following additional items: Windows / DOS Driver CD. Package Code : TEQIP-III/AS/jejc/76 Page 4

5 8086/8088 based, advanced Microprocessor Trainer with on-board LCD (20X4) along with Power Supply, PC Keyboard, Battery Backup and RS232C to USB Converter with USB (A-B) cable RS-232-C Cable. USB Cable User's Manual. Monitor Program Listing Assembly Language Reference Card. UV Erasers for erasing EPROM. Software 8085 emulator to run on PC in Windows7/8/10 platforms Simulator IDE with following features: Simulation interface showing internal processor architecture with interrupts interface Three memory editors for external 64K memory, to simultaneously view/edit three different memory ranges during the simulation I/O ports editor and peripheral devices interface for simulation of I/O instructions Variable simulation rate, simulation statistics and simulation logging with log viewer Breakpoints manager for code debugging with breakpoints support 8085 assembler, interactive assembler editor for beginners, 8085 disassembler Interface for TASM 8085 assembler 8085 Basic compiler with smart Basic source editor Support for external simulation modules Extensive program options Operate on either in stand-alone keyboard and LCD or with host PC through its RS 232C / RS 485 interface in serial mode. Work with either 8086 or 8088 CPU in Max Mode at a frequency of 8 MHz. On-board Coprocessor 8087 NDP be provided. Keyboard and serial monitor programs must support the entry of user programs, editing and debugging facilities like breakpoint, single-step and full speed execution of user program. Built-in One line assembler and disassemble in both serial and stand-alone modes of operation. Provision for on-board memory of 1 M bytes with battery back-up. On-board parallel printer port. On-board 8 bit DAC On-board 12 bit ADC using AD I/O lines and three 16-bit programmable interval timers. On-board interrupt controller which can handle 8 external interrupt sources; and provision of cascading through expansion connector. Provision for system bus expansion through ribbon cable connectors. Driver software for file upload / download to / from host PC. Must have Onboard Ni-Cd battery backup for RAM and onboard Adapter (SMPS) for +5V@ 3A, ma (for ADC and DAC), and ma It should support many types of interfaces which are common for all the trainers for training purpose: Keyboard, Elevator, Display, ADC with DAC, Dual DAC, Logic Controller, Traffic Lights, 8253 Demo, RTC, Tone Generator, Stepper Motor, Numeric Printer, 8 bit - 16 Channel ADC, 12 bit - 16 Channel ADC, Opto Isolated Input, Opto Isolated Output, LCD interface, Relay Output, DC Motor Interface, RTD Temperature Controller interface, etc. Study Cards for 8255, 8279, 8259, 8251, 8253, etc. Cycle Step Interface. 16K Bytes EPROM Programmer Interface to program 2716 through K Bytes EEPROM Programmer. 16K Bytes Flash Memory Programmer. Audio Tape Interface. MEMORY : Six JEDEC 32 pin sockets offer following memory configuration. ROM : 256K Bytes (128K X 2) of System firmware using 27C010 & listing of monitor program. RAM : 256 bytes using K upgradable to 512 K bytes using (256K X 2) EXPANSION: RAM : 256K Bytes supplied using (128K X 2) / 512 K bytes using Package Code : TEQIP-III/AS/jejc/76 Page 5

6 Keil PK51 Professional Developer s Kit (256K X 2) with battery backup. OR ROM: 128K bytes using 27C512 (64K X 2) to 512 K bytes using 27C020 (256K X 2). PERIPHERALs: 8255 : (5 Nos): User can have total of 120 I/O lines; Three 8255s to be used for parallel printer interface, DAC, ADC and LCD; Two be available for users : 3 programmable interval timers be available to the user : Dual channel UART used for serial communication (RS 232C and RS 485); Supports all standard bauds from 110 to : Universal Peripheral Interface used to interface PC keyboard in stand-alone mode : To Control 32 keys keyboard and 6-digit, half-inch size, seven segment LED display. 8288: Bus controller to generate control signals. 8284: Clock generator to generate clock for processor and associated peripherals. INTERRUPTs: External: NMI connected to on-board switch with user defined vector INTR controlled by 8259A PIC. Internal: Interrupt Vectors 1 (Single Step) and 3 (Breakpoint) reserved for monitor. INTERFACE Signals: Parellel I/O: 48 TTL compatible lines (2x8255) brought out through two 26 pin ribbon cable connectors. Serial I/O : RS-232-C serial interface signals through onboard 9 pin D type female connector. CPU Bus: Demultiplexed and fully buffered, TTL compatible, Address, Data & Control signals are available on two 50 pin ribbon cable connectors. Timer Signals: Timer 0, 1, 2 signals brought to a header. Analog signals: 8 analog inputs for ADC are fed through terminal blocks; Also DAC out available at a test point. Housed in an ABS Plastic moulded cabinet Trainer should be supplied with the following additional items: Driver software CD for Windows & DOS. RS-232-C Cable. USB Cable User's Manual with schematic diagrams. Monitor Program Listing. 8086/88 Assembly Language Reference Card. Software 8086/88 emulator to run on PC in Windows7/8/10 platforms. PK51 Professional Developer s Kit Lic - 1 Node Locked Single User Perpetual license, by Electronic Delivery only Features: µvision Integrated Development Environment Debugger Simulator Keil Extended 8051 Compilation Tools AX51 Macro Assembler CX51 ANSI C Compiler LX51 Linker/Locator OHX51 Object-HEX Conveter Keil Classic 8051 Compilation Tools A51 Macro Assembler C51 ANSI C Compiler BL51 Code Banking Linker/Locator OH51 Object-HEX Converter OC51 Banked Object Converter Target Debuggers FlashMON51 Target Monitor MON51 Target Monitor MON390 (Dallas 390) Target Monitor Package Code : TEQIP-III/AS/jejc/76 Page 6

7 MONADI (Analog Devices 812) Target Monitor ISD51 In-System Debugger RTX51 Tiny Real-Time Kernel Will work with a variety of 8051 microcontrollers, Will develop code for the Dallas 390 or Philips 51MX devices, Need to write code in C, Require a simulator or don't have an emulator, Create complex, single-chip applications that require a small real-time kernel. Keil PK51 Professional Developer s Kit-1 One Single Board Computer based on 8051 with Power supply Package Code : TEQIP-III/AS/jejc/76 Page 7

8 FORMAT FOR QUOTATION SUBMISSION (In letterhead of the supplier with seal) Date: To: Sl. Description of Qty. Unit Quoted Unit rate in Rs. Total Price Sales tax and other No. goods (with full (Including Ex Factory price, excise duty, packing and (A) taxes payable Specifications) forwarding, transportation, insurance, other local In In figures costs incidental to delivery and warranty/ guaranty % (B) commitments) Total Cost Gross Total Cost (A+B): Rs. We agree to supply the above goods in accordance with the technical specifications for a total contract price of Rs. (Amount in figures) (Rupees amount in words) within the period specified in the Invitation for Quotations. Package Code : TEQIP-III/AS/jejc/76 Page 8

9 We confirm that the normal commercial warranty/ guarantee of months shall apply to the offered items and we also confirm to agree with terms and conditions as mentioned in the Invitation Letter. We hereby certify that we have taken steps to ensure that no person acting for us or on our behalf will engage in bribery. Signature of Supplier Name: Address: Contact No: Package Code : TEQIP-III/AS/jejc/76 Page 9