RL-C20 PARTS LIST # G USE THIS PARTS LIST FOR: For older hoists use the following: Parts List No E for Serial Number 4200 to 14761

Transcription

1 RL-C20 PARTS LIST # G USE THIS PARTS LIST FOR: Hoist Serial Number to For older hoists use the following: Parts List No E for Serial Number 4200 to IF YOUR HOIST DOES NOT FALL WITHIN THE SERIAL NUMBERS BREAKS, CONTACT HARSH TO GET THE APPROPRIATE MANUAL For pump replacement part numbers, consult the parts lists supplied with the pump IT IS RECOMMENDED THAT THIS HOIST BE INSTALLED BY A QUALIFIED TRUCK EQUIPMENT INSTALLER PHONE: (877) Toll-Free (970) Local Harsh International, Inc. 600 Oak Avenue Eaton, Colorado FAX: (970) customersupport@harshenviro.com Price: $2.50 Published: January 2012

2 C20 HOIST SCISSOR ASSEMBLY ITEM PART # QTY DESCRIPTION ITEM PART # QTY DESCRIPTION 1 A SCISSOR ASSEMBLY FRAME ATTACHMENT ANGLE *2 A CYLINDER ASSEMBLY (COMPLETE) SCREW,HX HD CAP 3 A UPPER MOUNT LOCKWASHER SPACER TUBE 2 5/8 OD NUT,HX 5 A LOWER MOUNT CYLINDER MOUNT PIN SPACER TUBE 3 OD COTTER PIN 7 A LOWER MOUNT GREASE ZERK (DRIVE IN) STRINGER PLATE *16 A DECAL KIT NOTE: *2 - A1693 INCLUDES CYLINDER ASSY, BOLTS, LOCK WASHERS, NUTS, ZERKS AND SPACER. *16 - A9775 INCLUDES ALL DECALS USED ON HOIST. SOME HOISTS MAY HAVE SELF TAPPING ZERKS IN VARIOUS LOCATIONS. 2

3 CYLINDER ASSEMBLY PART # A1693 QTY ITEM # PART # DESCRIPTION GREASE, DRIVE IN NUT, 7/ LOCK WASHER, 7/ HEX HEAD CAP SCREW, 7/16-14 x 4-1/2 LG, GR PLATE, CYLINDER MOUNT, SPACER, 3-1/8 WUDE 1 1 A15545 CYLINDER ASSY C20 **SEAL KIT A9498 SEAL KIT # A9498 RL-B10 and RL-C20 QTY ITEM # PART # DESCRIPTION WIPER RING, 1-3/4 ID SEAL, CROWN, 4-5/8 ID x 3/16 CS BACK-UP RING, 4-5/8 ID O-RING, 4-5/8 ID x 3/16 CS BACK-UP RING, 1-3/4 ID O-RING, 1-3/4 ID x 3/16 CS BACK-UP RING, 4-3/4 ID O-RING, 4-3/4 ID x 1/8 CS 248 DECAL KIT # A9775 RL-B10 and RL-C20 QTY ITEM # PART # DESCRIPTION DECAL, MAX CYL PRESS 2500PSI DECAL, PUMP-PTO DECAL, HOIST OPERATION (ELEC PUMP) DECAL, BOX PROP DECAL, BOX PROP DECAL, TAIL HINGE DECAL, HOIST OPERATION (PTO PUMP) 3

4 To Pump To Gland Nut To Pump To Cylinder Body C20 HOIST HOSE ASSEMBLY ITEM PART # QTY DESCRIPTION ITEM PART # QTY DESCRIPTION * HOSE ASSEMBLY 59" LG * ELBOW,90 DEG 3 /8 NPT- #6 JIC * HOSE ASSEMBLY 39" LG * ELBOW,90 DEG 1 /4 NPT- #6 JIC * HOSE ASSEMBLY 95" LG * ELBOW,90 DEG 1 /4 NPT (LONG) * HOSE ASSEMBLY 75" LG ELBOW,90 DEG # 6 JIC-#6 JIC ADAPTER #6 JIC-#6 SAE * ELBOW,90 DEG # 6 JIC-#6 SAE NOTE: * 1, 2 & 6 - USED ON WILLIAMS PUMP (102120) AND TANK & VALVE (102323) * 3, 4, 7 & 8 - USED ON MONARCH ELECTRIC PUMP (103011) *10 - IS INCLUDED WITH CYLINDER ASSY. 4

5 C20 HOIST CYLINDER PARTS LIST ITEM PART # QTY DESCRIPTION ITEM PART # QTY DESCRIPTION * A CYLINDER ASSEMBLY (COMPLETE) * CROWN SEAL 1 A CYLINDER BODY ASSEMBLY * O-RING GREASE ZERK (DRIVE IN) * BACK-UP RING CYLINDER MNT SPACER * O-RING SCREW, HX HD CAP * BACK-UP RING LOCKWASHER * WIPER RING NUT, HX GLAND NUT PISTON 15 A CYLINDER ROD ASSEMBLY A SEAL KIT * DECAL, MAX CYL PRESS 2500PSI NOTE: *A INCLUDES CYLINDER ASSY, SCREWS, LOCK WASHERS, NUTS, ZERKS AND SPACER. * NOT SOLD SEPARATELY, SOLD AS SEAL KIT # A9498 ONLY. *16 INCLUDED IN DECAL KIT # A9775 5

6 PTO SHAFT AND PUMP ACCESSORIES ITEM # PART # QTY DESCRIPTION ITEM # PART # QTY DESCRIPTION PUMP BRACKET YOKE,PUMP 1RND BORE * KIT, RVC BONNET CROSS & BEARING KIT CABLE HEAD,CURVED * DECAL,DANGER (SHAFT) HANDLE CABLE HEAD,STRAIGHT 10 A YOKE & SHAFT ASSY HANDLE CABLE, 6 W/SHORT * KIT, BEARING SHIELD CABLE, 7 W/SHORT DECAL, DANGER OUTER SHIELD CABLE, 8 W/SHORT SHIELD, OUTER CABLE, 10 W/SHORT U-JOINT ASSY,1-1/ HEX CABLE, 12 W/SHORT SHIELD, INNER CABLE, 15 W/SHORT YOKE,HEX BORE,1-1/8 KEY,1/4x4/8 YOKE, PTO 1-1/4 RND WOODRUFF BORE DECAL, HOIST OPER- * DRIVE SHAFT * PTO PUMP NOTES: *2 CONNECTION HARDWARE NOT SHOWN *3 UNIT IS SHIPPED WITH PART # *4 VARIOUS LENGTHS AVAILABLE. *6 INCLUDES ITEMS 7 THROUGH 15. *18 APPLY DECAL # ON DASHBOARD AS NEAR AS POSSIBLE TO HOIST CONTROLS. DECAL IS INCLUDED IN DECAL KIT #A9775. NEVER OPERATE PTO WITHOUT SHIELDS IN PLACE 6

7 C20 HOIST SAFETY PROP PARTS LIST ITEM PART # QTY DESCRIPTION ITEM PART # QTY DESCRIPTION A SAFETY PROP ASSEMBLY LOCKWASHER WASHER, FLAT BOTTOM ANGLE 2 A PIN PLATE ASSEMBLY SCREW, HEX HD CAP SAFETY BOX PROP BRACKET, LATCHING SIDE PLATE * DECAL, BOX PROP (10 x 4 3/4) STOP PEG DECAL, BOX PROP (9 1/4 x 1 1/2) NUT NOTE: *11 - APPLY ON OUTSIDE RUB RAIL IN AREA OF THE SERVICE SAFETY PROP. ONE DECAL ON EACH SIDE OF BOX. C20 HOIST TAIL HINGE PARTS LIST ITEM PART # QTY DESCRIPTION ITEM PART # QTY DESCRIPTION A TAIL HINGE ASSEMBLY 5 A VERTICAL PLATE ASSY 1 A TAIL HINGE ANGLE ASSY WASHER, FLAT 2 A PIN ASSY COTTER PIN, 2" LG VERTICAL PLATE GREASE ZERK 4 A VERTICAL PLATE ASSY DECAL, TAIL HINGE 7

8 HOIST SHIPPING GROUP OPTION PUMP DESCRIPTION SCISSOR SM PARTS PTO SHAFT TAILHINGE BOX PROP QTY C20-00 ~~~~ NO PUMP A1692 A1814 A C VOLT DC A1692 A1740 A1282 A MONARCH # M C PISTON-4W A1692 A1741 A1837 A1282 A VALVE-12 QT WMS# QT C TANK & VALVE-9QT A1692 A1741 A1282 A WMS #M8CR-9 QT C TANK & VALVE-9QT A1692 A1741 A1282 A P20 PUMP 8 GPM C20-20 ~~~~ ENGLAND A1765 ~~~~ C20-22 ~~~~ ENGLAND UPSIDE- A1835 ~~~~ DOWN MOUNT A19069 HOIST SUB-FRAME 1 MONARCH ELECTRIC PUMP PART # QTY ITEM # PART # DESCRIPTION VENT PLUG PUMP MNT BRACKET RELIEF VALVE PARTS KIT CONTROL BOX ASSY POPPET ASSY, FLOW CONTRIL SWITCH, SOLENOID RESERVOIR, 6 OD x 12 LG, POLY MOTOR, ELEC PUMP 1 15 & D COIL, 10 VDC VALVE, 2-WAY VALVE, 4-WAY PUMP ASSY. ELECTRIC, 2500 PSI 8