MK DIAMOND CX-3, WITH 6.5 HP VANGUARD WALK-BEHIND CONCRETE SAW PARTS LIST & EXPLODED VIEWS

Transcription

1 MK DIAMOND CX-, WITH 6.5 HP VANGUARD WALK-BEHIND CONCRETE SAW PARTS LIST & EXPLODED VIEWS Revision Manual PM Caution: Read all safety and operating instructions before using this equipment. This parts list MUST accompany the equipment at all times.

2 INTRODUCTION Congratulations on your purchase of a Home Depot CX- Concrete Saw. We are certain that you will be pleased with your purchase. MK Diamond takes pride in producing the finest construction power tools and diamond blades in the industry. Operated correctly, your CX- should provide you with years of service. In order to help you, we have included this parts manual. This manual contains exploded views and parts lists for your CX-. Please take a few minutes to familiarize yourself with the components by reading and reviewing this manual. If you should have questions, please feel free to call our friendly customer service department at: (800) Regards, MK Diamond WARNINGS Each machine is supplied with an operating instruction manual. Follow instructions strictly to ensure long service in normal operation. For repairs and service parts, contact your authorized MK Diamond dealer. WARNING Failure to comply with these warnings and instructions could result in death or serious injury. WARNING Always park the machine on a level surface with the engine OFF and the ignition switch set in the OFF position before performing any maintenance. Let the machine cool down! Disconnect sparkplug! WARNING This saw was designed for certain applications only. DO NOT modify this saw or use for any application other than for which it was designed. If you have any questions relative to its application, DO NOT use the saw until you have contacted your MK Diamond dealer. The manufacturer accepts no responsibility by unsuitable use or modifications. 2

3 TABLE OF CONTENTS PARTS LIST PAGE FIGURE 1 - CX CONC SAW W/6.5 HP VANGUARD - PART # FIGURE 2 - CX CONC SAW W/6.5 HP VANGUARD - PART # FIGURE - CX CONC SAW W/6.5 HP VANGUARD - PART # FIGURE 4 - CX LESS ENGINE - PART # FIGURE 5 - CX LESS ENGINE - PART # FIGURE 6 - CX LESS ENGINE - PART # FIGURE 7 - ASSY, FRONT AXLE - PART # FIGURE 8 - ASSY, BLADE SHAFT - PART #

4 EXPLODED VIEW FIGURE 2 - CX CONC SAW W/ 6.5 HP VANGUARD - PART #

5 PARTS LIST FIGURE 1 - CX CONC SAW W/ 6.5 HP VANGUARD - PART # ITEM NO. DESCRIPTION PART # QTY. 1 NUT, HEX, 5/ WASHER, 5/16 FLAT CUT SCREW, X 1/2 PAN HEAD WASHER, LOCK, SPLIT, 5/ NUT, HEX, NUT, HEX, CABLE, 48 CONTROL (RAW) WASHER, #10 SAE FLAT CLAMP, CABLE HEAD, THROTTLE CONTROL KNOB, THROTTLE PADDLE SCREW, 5/16-18 X 2 HEX HEAD BOLT, 5/16-18 X 2-/4 HEX HEAD TAP TAG, SERIAL NUMBER, BLANK RW 1 15 ASSY, OIL DRAIN, 12MM PLATE, ENGINE BOLT SCREW, BTTN, ALN, CAP, #8-2 X / WASHER, LOCK, XT, # SCREW, PAN HD, M5X20MM MK-CX LESS ENGINE BLADE, 12 X.125 X ASSY, CARTON, CX- PLAIN ENGINE, VANGUARD 6.5HP WIRE HARNESS, CX STD, SUBARU SWITCH, ENGINE ON/OFF, SUBARU BAR, SPACER, VG 6.5HP ENGINE

6 EXPLODED VIEW FIGURE - CX CONC SAW W/ 6.5 HP VANGUARD - PART #

7 PARTS LIST FIGURE - CX CONC SAW W/ 6.5 HP VANGUARD - PART # ITEM NO. DESCRIPTION PART # QTY. 1 WASHER, 5/16 SPLIT LOCK NUT, 1/4-20 HEX WASHER, 1/4 SAE FLAT WASHER, 1/4 SPLIT LOCK SCREW, 1/4-20 X 1/2 HEX HEAD SCREW, 1/4-20 X 1/2 SOCKET HEAD SET KEY, /16 X /16 X 1-/ BELT, MICRO-V, 240J PULLEY, 16J25 X.75 BORE CASTING, BELT GUARD, CX- COMP SCREW, 5/16-24 X 1/2 HEX HEAD MACHINE GUARD, INNER BELT

8 EXPLODED VIEW FIGURE 4 - CX LESS ENGINE - PART #

9 PARTS LIST FIGURE 4 - CX LESS ENGINE - PART # ITEM NO. DESCRIPTION PART # QTY. 1 NUT, 5/16-18 HEX SCREW, 5/16-18 X 1 HEX HEAD MACHINE WASHER, 5/16 SPLIT LOCK WASHER, 5/16 SAE FLAT SCREW, 5/16-18 X 1-1/2 HEX HEAD MACHINE SCREW, 5/16-18 X 1.0 FLAT HEAD SOCKET NUT, 5/16-18 NYLOK HEX CONSOLE, FRAME LABEL, CONSOLE, CX CASTING, FRAME, RIGHT CX-COMP CASTING, FRAME, LEFT CX-COMP TRUCK, CX LABEL, CX ASSY, FRONT AXLE ASSY, FRAME SUPPORT BRACKET, UP STOP

10 EXPLODED VIEW FIGURE 5 - CX LESS ENGINE - PART #

11 PARTS LIST FIGURE 5 - CX LESS ENGINE - PART # ITEM NO. DESCRIPTION PART # QTY. 1 NUT, /8-16 HEX WASHER, FLAT CUT / WASHER, /8 SAE FLAT WASHER, /8 SPLIT LOCK NUT, /8-16 NYLOK HEX SCREW, /8-16 X 1-1/2 HEX HEAD SCREW, /8-16 X 2-1/4 HEX HEAD SHIM,.045 THK.750 ID OD PIN, COTTER 1/8 X 1 1/ NUT, /4-10 HEX SPACER, DEPTH CONTROL ASSY, CRANK WHEEL, / WHEEL, REAR SPRING, DETENT SCREW, /8-16 X 2 HEX HEAD TUBE, DEPTH CTRL, / BEARING, FLANGE, /4ID, FD ASSY, BLADE SHAFT STUD, /4-10 X 7"

12 EXPLODED VIEW FIGURE 6 - CX LESS ENGINE - PART #

13 PARTS LIST FIGURE 6 - CX LESS ENGINE - PART # ITEM NO. DESCRIPTION PART # QTY. 1 VALVE, BALL 1/ HOSE, /8 X 5/8 VINYL, WASHER, /8 SAE FLAT CLAMP, 5/8 HOSE FITTING, 1/2 MNPT X /4 FNH SCREW, 5/16-18 X /4 HEX HEAD WASHER, LOCK, SPLIT, 5/ WASHER, 5/16 SAE FLAT washer, 1/4 SPLIT LOCK SCREW, 1/4-20 X 1/2 HEX HEAD NUT, LOCK STEEL 1/2 NPT NUT, /8-16 HEX CENTERLOCK FITTING, 1/2 MNPT X /8 BARB ASSY, POINTER ARM LABEL, CAUTION, GUARDS IN PLACE KNOB, TRI PLASTIC MK / CLIP, STOP BRACKET, WATER VALVE GUARD, SHAFT (COMP) HANDLEBAR ASSY, 14 BLADEGUARD GRIP, HANDLE

14 EXPLODED VIEW & PARTS LIST FIGURE 7 - ASSY, FRONT AXLE - PART # ITEM NO. DESCRIPTION PART # QTY. 1 WHEEL, FRONT, 04 X 1-1/2W COLLAR, SET, / AXLE, FRONT

15 EXPLODED VIEW & PARTS LIST FIGURE 8 - ASSY, BLADE SHAFT - PART # ITEM NO. DESCRIPTION PART OR IDENTIFYING NO. 1 KEY, SQUARE, 1/4 X 1-/ WASHER, 1/2 SAE FLAT BEARING, PILLOW BLK SCREW, 5/16-18 X /8 SOCKET HEAD SET SHAFT, BLADE FLANGE, INNER ASSY, FLANGE, OUTER SCREW, 1/2-1 X 1 HEX HEAD CAP, LH SCREW, 1/2-1 X 1 HEX HEAD CAP PULLEY, 16J25 X 1.0 BORE QTY. REQ. 15

16 MK DIAMOND CX, WITH VANGUARD 6.5 HP ENGINE PARTS LIST & EXPLODED VIEWS MK Diamond Products, Inc. 115 Storm Parkway Torrance, CA Toll-Free: (800) Phone: (10) Fax: (10)