PILOT RCU 2.0 PRODUCT OVERVIEW V10.12

Transcription

1 PILOT RCU 2.0 PRODUCT OVERVIEW V10.12

2 Contents 1. Overview 2. Product Details 3. New Features 4. Main Features 5. Conclusion

3 Product Overview Product Overview

4 Overview Pilot RCU 2.0 is an autonomous data collection and measurement probe that is mainly used for daily network quality monitoring, voice and data service verification, and benchmarking. It consists of a variety of test modules supporting multiple network standards. Pilot RCU 2.0 provides a built-in data processing platform, a modularized design with high performance and stability, and low power consumption.

5 Overview Network and Market Requirements Current Network Challenges Multi-operator environment Pilot interference Congested sites in urban areas Single site required for wide coverage in a suburban area Area with poor or no coverage Market Requirements 24-hour continuous operation Remote control Simultaneous, multi-terminal and multi-network testing Unattended testing Flexible in switching power source between a builtin UPS battery and an external power supply Applicable in extreme environments Current Challenges with Traditional Drive Test Tool Low efficiency with the manual testing mode Connection cables are cluttered and are easily damaged Traditional test requiring assisted operation Unstable connection with multiple test terminals Not portable and requires an external power supply

6 Overview Test Scenarios Test Type New services' quality verification. Interference verification. Coverage verification. Hotspots congestion verification Test Scenarios Outdoor: can be deployed in buses, taxis, trains, ships, etc. Indoor: stationary hotspots such as hotels, shopping malls, residential areas, offices, etc. Customers Network operators System vendors Service providers Government authorities such as the Telecommunications Regulatory Body

7 Overview Product Information Compact form factor Shock resistant, simple, and stable No fans No noise during operation and dust-proof Good heat-dissipation Aluminum design for good heat-dissipation Independent indicators Independent indicators for various operating statuses Wide voltage range DC 9~30 v, applicable to various environment Self-protection design Power supply interface protection to avoid incorrect power supply connection Real-time hardware status monitoring and self-protection against overheating, overvoltage, and overcurrent Extended USB interfaces Supports external scanners (PCTEL) and USB Dongle which is used as an external data card CE certified Highly integrated Built-in test modules Provides multi-module and multi-band solutions for 2G/3G/4G technologies, and supports HSPA M/21.1 Mbps and LTE CAT6 solutions

8 Overview Advantages and Values Advantages Values Easy operation, automatic and multi-terminal testing after device starts Improves work efficiency by reducing manual costs Large volumes of data collected and real-time data upload Continuous and stable operation without manual attendance Built-in battery and external power supply Provides power solutions for various test scenarios Applicable to extreme environments and remote controlled Investment on robust and efficient solution

9 Product Details Product Details

10 Product Details System Architecture Pilot RCU operates as one of the data collection and measurement probe for Pilot Fleet Unify system. Pilot Fleet Unify system is able to remotely manage all DingLi's drive test data collection portfolio through its centralized device and data management platform.

11 Product Details Introduction to Fleet Unify The Fleet Unify platform provides remote and centralized measurement probes and data management. It is capable of handling large volumes of data uploaded remotely for storage, automatic processing, reporting and analysis. Users may add and control test devices through the Web client of Pilot Fleet Unify and perform data post processing and analysis through Pilot Fleet Unify Analyser. Apply test plans in batches Dingli test devices Device Management Statistics Report Generates statistic reports Test Control Data Analysis Data Management Macro and micro data analysis Manages large volumes of data Device Management Data Management Data Analysis Imports multiple devices by importing an EXCEL file Records device status GIS real-time monitor Sort by test region or device type Sort by region or project Powerful search function View decoding information GIS positioning Macro presentation & Micro analysis System evaluation Network optimization Test monitoring

12 Product Details Pilot RCU 2.0 Specifications Item Description Voltage Power consumption 9V-30V DC 18 W (avg. ), 30 W (max.) Current 2 A (avg.), 3 A (max.) Operating temperature Humidity Impact Vibration Dimension Weight Internal storage Working hours (using battery only) -25 C to +65 C < 95% RH, without condensation 500m/s2 2 g, 5 Hz-500 Hz 340 x 238 x 59 mm 4.2 Kg 4 GB to 64 GB 120 minutes or more (with built-in battery), 10 hours or more (with stand external battery)

13 Product Details Quad-core Hardware Quad-core Pilot RCU 2.0 Pilot RCU 2.0 which serial number starting with 35 is a quadcore Pilot RCU. The hardware performance of this Pilot RCU is significantly improved when compared with the previous dualcore hardware. Support all test services that previously supported by a dualcore Pilot RCU 2.0 Support up to six modules for LTE test simultaneously Support four USB interfaces for external connection

14 Product Details Functions and Performance Services test Supports IOT (Interoperability Test) for 2G/3G/4G Supports multiple network technologies: LTE 2CC (CA)/HSPA+/WCDMA/GSM/GPRS/EDGE/CDMA/TD-SCDMA Supports Call Test (PESQ/POLQA), Value Added Services Test, and Data Test Supports real-time data transmission through Modem, WIFI, and Bluetooth Pilot RCU 2.0 Monitoring function Checks parameters, events, and test route information on the Web client of Fleet Unify Supports alarms with s or messages Device Performance High-performance hardware configuration to meet the requirements for simultaneous MOS and data service tests of multiple terminals Supports parallel service tests for multiple network technologies (2G/3G/4G) SD memory card with large capacity (32 GB) to meet the requirements for long-term data and log file storage Low power consumption, built-in UPS and external batteries to ensure continuous operation

15 Product Details Indicators Indicator Description Normal Operating Status Modem Indicates if the Modem is operating normally Blinks Green Test Modules (CH2-CH9) SYS GPS HDD Power BAT Indicates if the test modules operates normally Indicates if the system is running normally Indicates if the GPS module is running normally Indicates the read and write status of the CF card Indicates the built-in and external power supply status Indicates the power capacity of the built-in battery Green Blinks Green Blinks Green Main: Green EXT: Green Low: Red CHG: Green or not lighted

16 Product Details Buttons and Interfaces Power button External power interface Built-in battery slot Extended USB interfaces CF card slot

17 Product Details Interface and SIM Card Slots Item Usage Description LAN Ethernet interface LAN cable interface for connecting RCU 2.0 to a PC for data transmission and device bug fixing GPS GPS antenna interface GPS antenna interface Modem (CH1) Modem antenna interface Magnetic mount antenna interface CH2-CH9 Aux Antenna interfaces of eight test modules Test module secondary antenna interface Antenna interfaces of eight test modules corresponding to the channels from CH2 to CH9 Secondary antenna interface for connecting test modules SIM slots Modem and SIM card slots Insert SIM cards according to the information on the labels besides

18 Product Details Antennas External GPS receiver kit with SMA male connector Antenna with RF SMB female connector Magnetic mount antenna with SMA male connecter cable

19 Product Details Antennas (for LTE) 7-inch short stubby aerial antenna mast Full-band 3G & 4G magnetic mount antenna with SMA male connecter cable

20 Product Details Antenna and Extended Antenna Plate RCU back cover bracket RCU wall mount bracket

21 Product Details Power Adapter and Power Line AC DC power adapter with power cord Cigarette lighter male connector cable Power cable

22 Product Details Bluetooth GPS External Bluetooth GPS receiver External battery: provide power supply for six to ten hours Bluetooth adapter

23 Product Details Supported Tests RCU 2.0 supports the following service tests: Voice (PESQ, POLQA) CSFB ATTACH PDP Active/Deactive PING HTTP Page HTTP File Down WAP SMS FTP (DL&UL, customized threats) MMS Trace Route Speed Test Multi-RAB HTTP Upload HTTP Video Play DNS LookUp PBM App Facebook

24 Supported Modules Module Type WCDMA/GSM Module CDMA1X/EVDO Supported Frequency and Bands HSPA/UMTS: 850/1900/2100 MHz EDGE/GPRS/GSM: 850/900/1800/1900 MHz CDMA2000, 1X, EVDO: 800 MHZ FDD-LTE/WCMD/PA+/GSM FDD-LTE: 800/900/1800/2100/2600 MHz UMTS/HSPA+: 900/2100 MHz GSM/GPRS/EDGE: 850/900/1800/1900 MHz FDD-LTE/WCMD/PA+/GSM FDD-LTE/WCMD/PA+/GSM FDD-LTE/TDD-LTE/UMTS/GSM FDD-LTE: 700 (B17)/AWS UMTS/HSPA+: 850/1900/2100 MHz GSM/GPRS/EDGE: 850/900/1800/1900 MHz FDD-LTE: Band 1/3/7/8/20 UMTS: Band 1/2/5/6/8 GSM 850/900/1800/1900 MHz FDD-LTE: Band 1/3/5 TDD-LTE: Band 38/39/40/41 UMTS: Band 1/5 GSM: 850/900/1800/

25 Supported Modules Module Type TDD-LTE/FDD-LTE/UMTS/GSM FDD-LTE: Band 1/3/7/17 TDD-LTE: Band 38/39/40/41 WCDMA: Band 1/2/5/8 GSM: 1900/1800/900/850 MHz Supported Frequency and Bands FDD-LTE/UMTS/GSM FDD-LTE: Band 1/2/3/4/5/7/8/20/28 WCDMA: Band 1/2/3/4/5/8 GSM: 1900/1800/900/850 MHz TDD-LTE/FDD-LTE/UMTS/CDMA/GSM FDD-LTE: Band 1/2/3/4/5/8/12/17/25/26 TDD-LTE: Band 38/41 WCDMA/HSPA+: Band 1/2/4/5/8 CDMA/EVDO: BC0/BC1/BC10 Quad-band EDGE/GPRS/GSM:1900/1800/900/850 MHz UMTS/GSM TDD-LTE/FDD-LTE/UMTS/TD-SCDMA/CDMA/GSM WCDMA: Band 1/2/5/8 Quad-band EDGE/GPRS/GSM:1900/1800/900/850 MHz FDD-LTE: Band 1/3 TDD-LTE: Band 38/39/40/41 WCDMA: Band 1 CDMA: Band BC0 GSM: 900 E/1800

26 Supported Modules Module Type TDD-LTE/FDD- LTE/UMTS/CDMA/GSM (Support CA) TDD-LTE/FDD-LTE/UMTS (Support CA) Supported Frequency and Bands FDD-LTE: Band 1/2/3/4/5/7/8/20/26/28 TDD-LTE: Band 38/39/40/41 WCDMA: Band 1/2/4/5/8 CDMA/EVDO: Band bc0/bc1 GSM: 1900/1800/900/850 CA: Intra-band contiguous: 2/3/4/7/38/39/40/41 Intra-band non-contiguous: 2/3/4/7/41 Inter-band: 1+3, 1+5, 1+7, 1+8, 1+20, 1+26, 3+5, 3+7, 3+8, 3+20, 3+26, 3+28, 7+20, 7+28, 5+7, FDD-LTE: Band 1/3/5/7/8/18/19/21/28 TDD-LTE: Band 38/39/40/41 WCDMA: Band 1/5/6/8/9/19 CA: 1 + 1/5/8/18/19/ /5/7/8/19/ /7/ /

27 Supported Modules Module Type TDD-LTE/FDD- LTE/UMTS/CDMA/GSM (Support CA) TDD-LTE/FDD-LTE/UMTS (Support CA) Supported Frequency and Bands FDD-LTE: Band 1/2/3/4/5/7/8/20/26/28 TDD-LTE: Band 38/39/40/41 WCDMA: Band 1/2/4/5/8 CDMA/EVDO: Band bc0/bc1 GSM: 1900/1800/900/850 CA: Intra-band contiguous: 2/3/4/7/38/39/40/41 Intra-band non-contiguous: 2/3/4/7/41 Inter-band: 1+3, 1+5, 1+7, 1+8, 1+20, 1+26, 3+5, 3+7, 3+8, 3+20, 3+26, 3+28, 7+20, 7+28, 5+7, FDD-LTE: Band 1/3/5/7/8/18/19/21/28 TDD-LTE: Band 38/39/40/41 WCDMA: Band 1/5/6/8/9/19 CA: 1 + 1/5/8/18/19/ /5/7/8/19/ /7/ /

28 New Features New Features

29 Real-Time Test Device Status on Pilot Fleet Unify Users may view the real-time device status under Device Status on Pilot Fleet Unify web. The supported device status information includes: Online status Online duration Vehicle speed Longitude and latitude Remaining battery capacity CPU temperature Remaining internal memory Remaining device disk space Logfiles to upload Device firmware version

30 High Speed Train and Subway Train Test with Imported Route Files Import high speed train and subway train route files to the Pilot RCU through RCU Client. The route file must be in.kml format. Conduct automatic pinpointing with GPS positioning during the test. Complete the discontinuous measurement plot caused by GPS signal lost or discontinuous positioning.

31 VoLTE POLQA Test (48K Audio) Improved VoLTE POLQA test Traditional audio reference file: 8K and 16K, more applicable to 2G/3G technologies Newly supported audio reference file for VoLTE POLQA voice quality measurement test: 48K

32 Optional Logfile Formats Default logfile format: *rcu Optional logfile formats: *.dcf, *.cti, *.dtlog, *.cu Configured under Advanced Settings on Pilot Fleet Unify

33 Main Features Main Features

34 Main Features MOS Test 1. PESQ 1 2 Uses independent channels to avoid any interference among test modules Supports the PESQ algorithm POLQA Eight channel PESQ Compatible with multi-network technologies Flexible hardware configuration Simultaneous voice replay and recording MOS test (POLQA) is supported only by dual-kernel Pilot RCU 2.0, and internal POLQA sound card is required. Up to four channel MOS test (POLQA) is supported (Mobile to Mobile or Mobile to Land). PESQ/POLQA Configuration for Separate Modules Users may configure different MOS algorithm (PESQ or POLQA) for different modules within the same Pilot RCU on Pilot Fleet Unify. For example, users may configure PESQ (8KHz) for Module 2 and 3, and configure POLQA (48KHz) for Module 4 and 5. Typical Application: Network Benchmarking 1. Test data can be uploaded to Pilot Fleet Unify to generate Benchmarking Reports and provide KPI comparison for each network. 2. Pilot RCU 2.0 allows MOS benchmarking and ensures the test validity.

35 Main Features VoLTE Test Maximum internal modules working simultaneously Typical Application Case Pilot RCU 2.0 supports up to eight internal VoLTE test modules. Eight channels can be used to conduct test independently and simultaneously without any interference. VoLTE KPI comparison among multiple operators VoLTE PESQ and POLQA simultaneously Typical Application Case Pilot RCU 2.0 supports up to four channels of VoLTE PESQ and POLQA test simultaneously. 4-channel PESQ + 4-channel POLQA

36 Main Features Various Data Service Tests Performance Description: Voice + data tests: Four test modules are configured for PESQ MOS test FTP and four test modules for FTP test. Simultaneous data tests: Multiple data services (such as FTP, HTTP, HTTP Ping, and ) are configured in one test module or configured in multiple test modules; a maximum of eight test modules can be configured Common Data Service Test for simultaneous test. Private servers for HTTP Upload test: Users may create their own HTTP Video Play Ping Upload server for the test WAP Typical Application Case Benchmarking Test Data Service Test Data network coverage rate KPIs and parameters for optimization Only common data test services are listed. For more information about test services, see slide 20. Average Download/Upload Rate Success/Dropped Rate Ping Delay KPIs of HTTP Video tests, such as Jitter, Packet Loss Rate

37 Main Features GPS and Logfile Information Synchronization All test modules in a Pilot RCU 2.0 uses the same GPS receiver GPS and test logfile information (such as parameter and event information) can be automatically synchronized for easy analysis For the same Pilot RCU 2.0, all test module s log files (at a given time) shares the same GPS information/positioning Synchronization between Events and GPS information GPS information synchronization among multiple modules within the same device

38 LTE Carrier Aggregation (CA) Test Pilot RCU 2.0 supports LTE 2CC (2 component carriers) CA test with the R1525 and MC7430 modules. LTE category: 6 Theoretical peak rate Downlink rate: FDD: 300 Mbps TDD: 222 Mbps Uplink rate: FDD: 50 Mbps TDD: 26 Mbps

39 Real-time Monitoring with Pilot Watcher Pilot Watcher is a software application that is installed on an Android tablet. It can be connected to a Pilot RCU through WiFi for real-time service test monitoring of all test modules within the Pilot RCU. Users may monitor the following information: Service events MOS score Service messages Radio parameters GPS measurement route Service test plans Connection diagram

40 Main Features Optimum Stability and Efficiency Based on the stable and highly-efficient Automatic test Linux system, Pilot RCU 2.0 provides selfhardware-and-software monitoring capability for automatic trouble detection and reset, which ensures optimum operation stability Intelligent reset 7/24 stable operation Loop test as required and efficiency. Hardware monitoring: CPU and motherboard temperature monitoring, overvoltage and overcurrent protection, etc. Execution with high efficiency Unattended test Software monitoring: no response from test modules, abnormal test program status, continuous abnormal test events, etc.

41 Main Features Remote Device Control Control Device on Web Client of Pilot Fleet Unify Control Device by Delivering SMS Messages Reboot devices Reboot devices Update test plans Modify Modem dial configuration Stop and pause tests Modify server IP and port information configured in the device 41

42 Main Features Easy Test Control on Pilot Fleet Unify Easy test plan configuration Execute test based on configured time range Execute test based on configured execution count Execute test based on configured workdays, for example, from Monday to Thursday One-click test plan change Flexible logfile upload to Pilot Fleet Unify server Upload in real time Upload when the device is in the idle mode Do not upload Upload by using Modem or any other test module Test controlled by customized regions Customize test regions as required Test only in specific regions Stop test or enter the idle mode when outside of specific regions

43 Main Features Easy Operation on Pilot Fleet Unify Various operations can be managed through simple and user friendly Web interface of Pilot Fleet Unify. Visual test plan/task template configuration Centralized test information configuration and maintenance Centralized test event and alarm monitoring Centralized Logfile management Automatic logfile statistics and report Remote and automatic device firmware upgrade

44 Conclusion Conclusion

45 Conclusion hour continuous operation with high stability, large volume of data collection Highly integrated and high performance hardware configuration Applicable to extreme environments LCD screen with alarm audio for easy status and information check Industrial modularization design and customizable module configuration Supports remote control and monitoring, and online firmware upgrade

46 世纪通信 鼎利支持 Tel : Fax : sales@dingli.com support@dingli.com No. 8, the Fifth Technology Road, Gangwan Avenue, Zhuhai, , P.R. China