V-Series Contura Switches

Transcription

1 -Series Contura Switches Product Highlights: Maximum sealing protection with dual seals around lamps and rocker stem, certified to IP & IP. Optional panel seals for additional protection. Silver plated butt contact mechanism provides 0 to 00 thousand electrical cycles and a variety of different electrical ratings. Roller pin mechanism does not require lubricants and allows the switch to withstand extreme temperatures. The switch base accommodates up to 0 terminals and a large variety of switch and lighting circuits. The multi-step mounting wings provide a secure fit for panel thicknesses of 0.0 thru 0.0 in an industry standard 0.0 x.0 mounting hole. The switch connector allows the user to preload QC terminals for easy assembly to switch base. Numerous choices of removable rockers allow for style change without having to retest or re-qualify the switch base. Illumination options are endless with bar, oval, and square lenses available with choices of incandescent, neon and a wide variety of LEDs including superbrite, megabrite, flashing and bicolor lighting. Available with a variety of complimentary mounting panels, hole plugs, illuminated indicators and boots to accommodate most any design need. CONTURA III CONTURA CONTURA II CONTURA II Carling Technologies sealed -Series Contura switches are well known for their cutting edge design, high quality, maximum performance and unmatched reliability. These switches are a staple in the marine and transportation industries and have passed a range of environmental, corrosion, temperature, vibration, shock and sealing tests including MIL Std 0, MIL Std 0C, UL 00, ISO, IEC 0 and S 0 among others, making them one of the most rugged and reliable switches ever manufactured. Carling Technologies, Inc. 0 Johnson Avenue, Plainville, CT 00 sales@carlingtech.com Application Support: team@carlingtech.com Phone: (0) - ax: (0) -

2 -Series Contura Sealed Rocker Switches -Series Switch DESIGN EATURES INTERCHANGEALE ACTUATORS Panel redesign is a snap with our wide range of rocker styles. Achieve maximum design variety with minimum inventory. Simply swap rockers to create an entirely new look for your panel. DUAL SEAL PROTECTION Seals out water, dust, debris, and enables switch certification to IP/IP for front panel components. CLEAN CONNECTIONS Options for both eight and ten terminal base styles with AMP & Packard compatible connectors affords myriad circuit options while providing ease of assembly. OPTIONAL PANEL SEAL Prevents water/dust ingress behind panel. MULTIPLE LIGHTING OPTIONS In addition to incandescent lamps, our LED illumination is offered in a wide array of light intensities, colors, as well as dual level, tri-color, and flashing options. RASS ROLLER PIN Robust mechanism eliminates the need for lubricants. Enables switch to withstand -0 C to + C temperatures. SILER PLATED UTT CONTACT MECHANISM Providing 0K to 00K electrical cycles and a variety of different electrical ratings. sales@carlingtech.com Application Support: team@carlingtech.com Phone: (0) ax: (0)

3 -Series Contura Sealed Rocker Switches & Illuminated Plug Contura II & III The Contura II & III actuators are constructed of thermoplastic polycarbonate and are offered with a hard nylon overlay or a soft-touch elastomer overlay. These models incorporate aesthetic designs on the top and bottom of the rocker featuring two rows of raised bumps on the Contura II and three indented lines on the Contura III. Contura I The Contura I s Shape to create a Shape actuator works with the curves, contours & advanced styling of the latest panel designs, flowing with these advanced curves & radii. This actuator style fits on the Contura flush bracket/ bezel. Contura The symmetrically curved Contura actuator provides the perfect complement to the Contura I s Shape to create a Shape design concept. With its flush style mounting bracket, Contura can be mounted in between two Contura I s, by itself, or in groups. Contura I (WAE) The Contura I WAE sealed rocker switches, when used in a row, create an uniquely appealing wave design on your panel. A variety of colors and finishes are available for both rocker and wave insert. Contura I features bar and oval lenses. Contura II Contura II featuring gently curved corners and edges assuring compatibility with most any panel design. Intuitive feel is maximized by the use of embossed circular pads located at opposite ends of the rocker. Any combination of ar or Oval style lenses can be located in the pads providing a truly unique look, exclusive to Contura II. Contura X The raised bracket/bezel on the Contura X helps prevent inadvertent actuation of the rocker, as well as preventing debris from being trapped under the actuator. This curved rocker style is available with a variety of lenses and legends. Contura XI The raised bracket/bezel on the Contura XI helps prevent inadvertent actuation of the rocker, as well as preventing debris from being trapped under the actuator. This convex style rocker is available with a wide variety of lenses and legends. Contura XII The Contura XII version features a paddle style actuator with the raised bracket/bezel of Contura X and XI. The contoured handle design provides intuitive recognition and ease of operation and is available with all Contura X and XI lens and legend offerings. Contura XI The Contura XI represents a sleek new crossover rocker design which should appeal to Trucks, uses and Heavy ehicles as well as the Marine Industry. Intuitive feel is provided by recessed ridges along with a Center Groove which effectively defines the boundary between top and bottom switch functions. -Series Illuminated Indicators & Accessories Alert operator of systems functions or malfunctions, are offered with removable/replaceable lamps in Contura II, II, or X styles. Accessories include connectors, mounting panels, hole plugs, panel seals, and actuator removal tools. Refer to accessories page for full details sales@carlingtech.com Application Support: team@carlingtech.com Phone: (0) ax: (0)

4 Series Contura Sealed Rocker Switches - General Specifications Electrical Contact DC (MAX) resistive amps, AC 0 amps, 0AC / HP -0AC 0 amps, -DC amps, -DC 0A, T A, AC L Dielectric Strength 00 olts RMS Insulation Resistance 0 Megohms Initial Contact Resistance 0 milliohms DC Life 0,000-00,000 cycles circuit Contacts dependent Silver alloy, silver tin-oxide, fine silver Terminals rass or copper/silver plate / (.mm) Quick Connect terminations standard. Solder lug, Wire Lead Mechanical Endurance Physical 0,000 cycles minimum circuit dependent Lighted Incandescent - rated 0,000 hours Neon - rated,000 hours LED - rated 00,000 hours / life (LED is internally ballasted for voltages to DC) Seals Internal Optional external gasket panel seal ase Polyester blend rated to C with a UL flammability rating of 0. Contura II,III,I,, Hard Surface: asic actuator I, II structure molded of thermoplastic polycarbonate with a hard Nylon thermoplastic surface overlay. Soft Surface: asic actuator structure molded of thermoplastic polycarbonate with an elastomer overlay. Contura X,XI,XII,P Nylon Reinforced rated to 0 C Polycarbonate rated at 00 C Contura XI Polycarbonate lens/subrocker with AS shell Travel (Angular Displacement) position positions from center Mounting Specifications Panel Thickness Range Gaskets Acceptable Panel Thickness 0.00 to.0 (.mm to.mm).00 to.0 &. to. (. to.mm &. to.mm) Recommended: No gasket with panel thickness of.0,.0,.0,.,. or.0.0[.0].0[.] TEST CUT HOLE IN ACTUAL MATERIAL SWITCH MOUNTING HOLE Agency Certifications Environmental Sealing Corrosion Operating Temp. ibration ibration Shock Salt Spray Dust Thermal Shock Moisture Resistance Ignition Protection Sealed version: IP, in accordance with IEC 0, S 0, DIN 000 & NC This rating applies to front panel components of the actual switch only, and signifies protection against dust and the prolonged effects of immersion under pressure. The standard test for immersion under pressure requires submersion under one meter of water for 0 min. The -Series switch has exceeded these parameters, having been actuated and illuminated during submersion. Mixed lowing Gas (MG) Class III year accelerated exposure per ASTM -, - Silver and gold contacts -0 C to + C Per Mil-Std 0, Method 0D Test Condition A 0.0 DA or 0G s 0-00 Hz. Tested with CH connector. Test criteria - No loss of circuit during test, pre and post test contact resistance. Resonance search -0 Hz 0.0 DA Hz ±0 G s peak Horizontal Axis - G s max. Random Hz 0.0 PSD-Gsq/Hz 0 Hz Hz Hz Hz 0.0 No loss of circuit during test; <0μ seconds chatter. Per Mil-Std 0, Method, Test Condition 0G s. Tested with CH connector. Test criteria - No loss of circuit during test, pre and post test contact resistance. Per Mil-Std 0, Method 0D, Test Condition A, Hrs. Sealed version only. Per Mil-Std 0C, Method 0. Air elocity 00 ±00 eet/min, Test Duration Hrs. Per Mil-Std 0, Method 0, Test Cond. A, - C to + C. Test criteria - pre and post test contact resistance Per Mil-Std 0, Method 0, Test Criteria - pre and post test contact resistance All Contura switches with sealed construction meet the requirements of UL00/ISO for ignition protection, in addition to conformance with EC directive //EC for marine products. sales@carlingtech.com Application Support: team@carlingtech.com Phone: (0) ax: (0)

5 Series Contura II, III, & I Dimensional Specifications: in. [mm] sales@carlingtech.com Application Support: team@carlingtech.com Phone: (0) ax: (0)

6 -Series Contura, I & II Dimensional Specifications: in. [mm] CONTURA CONTURA CONTURA I CONTURA II SHOWN WITH AR LENS SHOWN WITH LOW PROILE LOCK SHOWN WITH OAL LENS SHOWN WITH LARGE LENS AND AR LENS. [.]. [.].00[.0].0 [.]. [.].0 [.].0 [.0]. [.]. [.0] TERMINAL ASE W/ARRIERS TERMINAL ASE W/O ARRIERS 0 TERMINAL ASE W/ARRIER AND LAMP TERMINAL 0 TERMINAL ASE W/O ARRIERS.00 [.].00 [.].000 [.0] 0. [.0].0 [.].0 [.].0 [.] X.0 [.].0 [.0].0 [.].0 [.] X.0 [.].0 [0.].0 [.].0 [.] X.0 [.].0 [0.].0 [.].0 [.].0 [.].0 [0.].0 [.] TERMINAL ASE W/ARRIERS TERMINAL ASE W/O ARRIERS 0 TERMINAL ASE W/O ARRIERS 0 TERMINAL ASE W/O ARRIERS.0 [.] 0 SWITCH SHOWN WITH CH CONNECTOR TERMINAL OTTOM IEW TERMINAL ARRANGEMENT TERMINAL ASE OTTOM IEW TERMINAL ARRANGEMENT 0 TERMINAL ASE SWITCH SHOWN WITH C CONNECTOR 0 TERMINAL SWITCH SHOWN WITH C CONNECTOR 0 TERMINAL sales@carlingtech.com Application Support: team@carlingtech.com Phone: (0) ax: (0)

7 -Series Contura X, XI, XII & XI Dimensional Specifications: in. [mm] CONTURA X SHOWN WITH RAISED RACKET CONTURA XI SHOWN WITH RAISED RACKET AND TWO SQUARE LENSES CONTURA XII SHOWN WITH PADDLE ACTUATOR CONTURA XI SHOWN WITH LARGE LENS. [.].0 [.].0 [.]. [.].0 [.]. [0.].0 [.]. [.]. [0.].0 [.].0 [.].0 [.].0 [.].0 [.] TERMINAL ASE W/ARRIERS 0 TERMINAL ASE W/O ARRIERS TERMINAL ASE W/O ARRIERS 0 TERMINAL ASE W/O ARRIERS.0 [.].0 [.].0 [.].0 [.].0 [.].0 [.].0 [.].0 [.] X.0[.] TERMINAL ASE W/ARRIERS.0 [.0].0 [0.] 0 TERMINAL ASE W/ARRIERS.0 [.0].0 [0.] 0 TERMINAL ASE W/O ARRIERS.0 [.0].0 [0.].0 [0.].0 [.] 0 SWITCH SHOWN WITH CH CONNECTOR TERMINAL OTTOM IEW TERMINAL ARRANGEMENT TERMINAL ASE OTTOM IEW TERMINAL ARRANGEMENT 0 TERMINAL ASE SWITCHES SHOWN WITH C CONNECTOR 0 TERMINAL sales@carlingtech.com Application Support: team@carlingtech.com Phone: (0) ax: (0)

8 -Series Contura II to XI - Circuit Diagram CIRCUIT CIRCUIT DIAGRAM CIRCUIT CIRCUIT DIAGRAM CIRCUIT CIRCUIT DIAGRAM A J K C L D M E R S G SYM. SYMOL LEGEND DEINITION DESIGNATES TERMINALS AND CONTACTS DESIGNATES LAMP LOCATION DESIGNATES MAINTAINED CIRCUITS H DESIGNATES OTHER POSITION DESIGNATES MOMENTARY CIRCUITS DESIGNATES TWO POSITION CONNECTION DESIGNATES EXTERNAL JUMPER PROIDED Y CUSTOMER sales@carlingtech.com Application Support: team@carlingtech.com Phone: (0) ax: (0)

9 -Series Contura II to XI - Circuit Diagram LAMP CIRCUIT CIRCUIT DIAGRAM LAMP CIRCUIT CIRCUIT DIAGRAM LAMP CIRCUIT CIRCUIT DIAGRAM LAMP CIRCUIT CIRCUIT DIAGRAM A/ / L/ SPECIAL # / G/ M/R SPECIAL # C/ H/Z N/T SPECIAL # D/ J/ P/ E/ K/W U/Y - (-) - - CIRCUIT CIRCUIT DIAGRAM CIRCUIT CIRCUIT DIAGRAM CIRCUIT CIRCUIT DIAGRAM J 0(-) J 0(-) JA NOTE: J circuits are available for all non-locking -Series styles. Consult factory for p/n details. 0(-) J JJ 0(-) J JK 0(-) J SYM. SYMOL LEGEND DEINITION DESIGNATES TERMINALS AND CONTACTS DESIGNATES LAMP LOCATION DESIGNATES TWO POSITION CIRCUIT CIRCUIT JA,JJ,JK J,J,J,J J CONNECTOR PART # JC-0 JC-0 JC-0 sales@carlingtech.com Application Support: team@carlingtech.com Phone: (0) ax: (0)

10 0 -Series Contura II & III Sealed Rocker Switches - Ordering Scheme D A T 0 A R Series Circuit Rating Termination Illumination racket 0 Color SERIES CIRCUIT Terminal Connections as viewed ( ) - momentary from bottom of switch: SP - single pole - uses terminals, &. terminal 0 terminal DP - double pole uses terminals,,,, & Terminals,, & 0 for lamp circuit only Position: SP DP &, & Connected Terminals &, & A ON NONE O (ON) NONE O C ON NONE (O) D ON NONE ON ON NONE (ON) J ON O ON K ON O (ON) L (ON) O (ON) SPECIAL CIRCUITS H* & &, & & G* &, & & O S* &, & & & M* ( &, & ) & O R* ( &, & ) & & E* & & & *Jumper between terminals & for circuits H,G,M,R & S are specified in selection. External jumper between terminals & for circuit E are provided by customer. Circuit E may be used for SP O-ON-ON circuit. DC Resistive A C 0A D 0A E 0A, 0A T (circuit,, A & D only) 0A, A T (circuit G only) M.A/0A N.A/A, LAMP (SAME CODING OR OTH SELECTIONS) Selection : above terminals & ; Selection : above terminals & No lamp 0 Neon AC 0AC Incandescent LED* superbright superbright Red Amber Green Red DC A L R DC M G S DC C N H T DC D P J * Consult factory for daylight bright LED options. Typical current draw for LED is 0ma. LUSH RACKET COLOR, PANEL SEAL lack White Gray No Seal W G One Seal C Y H ACTUATOR 0 No A, Contura II C, D Contura III orientation above terminals: 0 LENS 0 - No Z - No Clear White Amber Green Red lue G M T C H N U D J P E K R W A L S Y color for LEDs must be clear, white, or match color of LED. Green or blue lenses are not recommended with Neon lamps.,, TERMINATION/ASE STYLE term 0 Term Termination Jumper.0 TA (QC) no barriers No A.0 TA (QC) with barriers No J K.0 TA (QC) no barriers Yes T to Solder Lug no barriers No C D Solder Lug No Wire Leads no barriers No E Wire Leads No Note: Codes J & K for circuits H, G & M. ILLUMINATION #:above terminals & end of switch.; # above terminals & end of switch. Positive (+) and negative (-) symbols apply to LED lamps only Sealed Unsealed s Illumination Type wired to Terminals S 0 NONE A INDEPENDENT (+) ( ) DOWN (+) ( ) C UP (+) ( ) D DOWN (+) ( ) DOWN (+) ( ) E UP (+) ( ) UP (+) ( ) INDEPENDENT (+) ( ) UP (+) ( ) G INDEPENDENT (+) ( ) UP (+) ( ) H Z INDEPENDENT (+) ( ) U Y INDEPENDENT (+) ( ) INDEPENDENT 0 (+) ( ) SINGLE POLE SWITCHES ONLY J DOWN (+) ( ) INDEPENDENT (+) ( ) K W INDEPENDENT (+) ( ) INDEPENDENT (+) ( ) DOULE POLE SWITCHES ONLY L DOWN (+) ( ) M R UP (+) ( ) N T DOWN (+) ( ) DOWN (+) ( ) P UP (+) ( ) UP (+) ( ) ACTUATOR COLOR AND TEXTURE 0 - No lack Gray Red White Soft Surface G R W Hard Surface C H S Y ACTUATOR LENS OR ODY LEGENDS ON O I O O ON O I O O O O O I I O N N or additional legend options & codes, visit us at LEGEND ORIENTATION 0 No legend (used with codes - in selection ) ACTUATOR LENS LEGEND 00 No legend this location / no actuator (used with codes - in selection ) Selection required when switch requires two legends. If the two legends consist of one lens and one body legend, lens legend must be specified in selection ; body legend specified in selection. or legend options & codes, visit us at Notes: Consult factory to verify horsepower rating for your particular circuit choice. Custom colors are available. Consult factory. ody legends not available on Soft surface actuators; White imprinting is standard on black actuators; lack imprinting is standard on white, red and gray actuators. Custom colors are available, consult factory. Additional ratings available. See -Series Switch Accessories page. Contura II available with two square lenses. Consult factory for details. sales@carlingtech.com Application Support: team@carlingtech.com Phone: (0) ax: (0)

11 -Series Contura II & III Locking Sealed Rocker Switches - Ordering Scheme Series D A S W 0 A Z E 00 0 Circuit Rating Termination Illumination Lock racket 0 unction SERIES CIRCUIT Terminal Connections as viewed ( ) - momentary from bottom of switch: SP - single pole - uses terminals, &. terminal 0 terminal DP - double pole uses terminals,,,, & Terminals,, & 0 for lamp circuit only Position: SP DP &, & Connected Terminals &, & A ON NONE O D ON NONE ON ON NONE (ON) J ON O ON K ON O (ON) L (ON) O (ON) N O NONE ON SPECIAL CIRCUITS H* & &, & & G* &, & & O S* &, & & & M* ( &, & ) & O R* ( &, & ) & & E* & & & *Jumper between terminals & for circuits H,G,M,R & S are specified in selection. External jumper between terminals & for circuit E are provided by customer. Circuit E may be used for SP O-ON-ON circuit. DC Resistive A C 0A D 0A E 0A, 0A T (circuit,, A & D only) 0A, A T (circuit G only) M.A/0A N.A/A TERMINATION/ASE STYLE term 0 Term Termination Jumper.0 TA (QC) no barriers No A.0 TA (QC) with barriers No J K.0 TA (QC) no barriers Yes T to Solder Lug no barriers No C D Solder Lug No Wire Leads no barriers No E Wire Leads No Note: Codes J & K for circuits H, G & M. ILLUMINATION & SWITCH SEALING #:above terminals & end of switch.; # above terminals & end of switch. Positive (+) and negative (-) symbols apply to LED lamps only Sealed Unsealed s Illumination Type wired to Terminals S 0 NONE C UP (+) ( ) H Z INDEPENDENT (+) ( ) DOULE POLE SWITCHES ONLY M R UP (+) ( ) LOCK Lock above terminals & end of switch. W lock LAMP above terminals & end of switch No lamp 0 Neon AC 0AC Incandescent LED* superbright superbright Red Amber Green Red DC A L R DC M G S DC C N H T DC D P J * Consult factory for daylight bright LED options. Typical current draw for LED is 0ma. LUSH RACKET COLOR, PANEL SEAL lack White Gray No Seal W G One Seal C Y H HARD SURACE ACTUATOR lack Gray Red White Contura II A G H Contura III C D E orientation above terminals: 0 LENS Z - No Clear White Amber Green Red lue D J P color for LEDs must be clear, white, or match color of LED. Green or blue lenses are not recommended with Neon lamps. ACTUATOR LOCK UNCTION AND COLOR Lock Color Up Down Up & Down Center Match A H R lack J S White C K T Red D L Safety Orange E M W ACTUATOR LENS OR ODY LEGEND 00 - No O ON O I O O O I N or additional legend options & codes, visit us at LEGEND ORIENTATION 0 No legend (used with codes - in selection ) ORIENTATION AZC- AZC- ORIENTATION O ACTUATOR/LENS IN PANEL ORIENTATION ORIENTATION,, ORIENTATION Notes: Consult factory to verify horsepower rating for your particular circuit choice. Custom colors are available. Consult factory. White imprinting is standard on black actuators; lack imprinting is standard on white, red and gray actuators. Custom colors are available, consult factory. Only available with position circuits. Center O and special circuits only available with center position lock function. Additional ratings available. See -Series Switch Accessories page. sales@carlingtech.com Application Support: team@carlingtech.com Phone: (0) ax: (0)

12 -Series Contura I Sealed Rocker Switches - Ordering Scheme Series D A T 0 E P C Circuit Rating Termination Illumination racket 0 Color SERIES CIRCUIT Terminal Connections as viewed ( ) - momentary from bottom of switch: SP - single pole - uses terminals, &. terminal 0 terminal DP - double pole uses terminals,,,, & Terminals,, & 0 for lamp circuit only Position: SP DP &, & Connected Terminals &, & A ON NONE O (ON) NONE O C ON NONE (O) D ON NONE ON ON NONE (ON) J ON O ON K ON O (ON) L (ON) O (ON) SPECIAL CIRCUITS H* & &, & & G* &, & & O S* &, & & & M* ( &, & ) & O R* ( &, & ) & & E* & & & *Jumper between terminals & for circuits H,G,M,R & S are specified in selection. External jumper between terminals & for circuit E are provided by customer. Circuit E may be used for SP O-ON-ON circuit. DC Resistive A C 0A D 0A E 0A, 0A T (circuit,, A & D only) 0A, A T (circuit G only) M.A/0A N.A/A, LAMP (SAME CODING OR OTH SELECTIONS) Selection : above terminals & ; Selection : above terminals & No lamp 0 Neon AC 0AC Incandescent LED* superbright superbright Red Amber Green Red DC A L R DC M G S DC C N H T DC D P J * Consult factory for daylight bright LED options. Typical current draw for LED is 0ma. LUSH RACKET COLOR, PANEL SEAL lack White Gray No Seal W G One Seal C Y H ACTUATOR 0 No E Contura I, left orientation T Contura I, left orientation, laser etched Contura I, right orientation R Contura I, right orientation, laser etched orientation above terminals: 0 LENS 0 - No Z - No Clear White Amber Green Red lue G M T C H N U D J P E K R W A L S Y E color for LEDs must be clear, white, or match color of LED. Green or blue lenses are not recommended with Neon lamps.,, TERMINATION/ASE STYLE term 0 Term Termination Jumper.0 TA (QC) no barriers No A.0 TA (QC) with barriers No J K.0 TA (QC) no barriers Yes T to Solder Lug no barriers No C D Solder Lug No Wire Leads no barriers No E Wire Leads No Note: Codes J & K for circuits H, G & M. ILLUMINATION & SWITCH SEALING #:above terminals & end of switch.; # above terminals & end of switch. Positive (+) and negative (-) symbols apply to LED lamps only Sealed Unsealed s Illumination Type wired to Terminals S 0 NONE A INDEPENDENT (+) ( ) DOWN (+) ( ) C UP (+) ( ) D DOWN (+) ( ) DOWN (+) ( ) E UP (+) ( ) UP (+) ( ) INDEPENDENT (+) ( ) UP (+) ( ) G INDEPENDENT (+) ( ) UP (+) ( ) H Z INDEPENDENT (+) ( ) U Y INDEPENDENT (+) ( ) INDEPENDENT 0 (+) ( ) SINGLE POLE SWITCHES ONLY J DOWN (+) ( ) INDEPENDENT (+) ( ) K W INDEPENDENT (+) ( ) INDEPENDENT (+) ( ) DOULE POLE SWITCHES ONLY L DOWN (+) ( ) M R UP (+) ( ) N T DOWN (+) ( ) DOWN (+) ( ) P UP (+) ( ) UP (+) ( ) ACTUATOR COLOR,, No 0 lack C Gray H Red S White Y Nickel D Pewter E ACTUATOR LENS OR ODY LEGENDS ON O I O O ON O I O O O O O I I O N N or additional legend options & codes, visit us at LEGEND ORIENTATION 0 No legend (used with codes - in selection ) ORIENTATION EC-00 C-00 EC0-00 C0-00 EC-00 C-00 ORIENTATION O ACTUATOR/LENS IN PANEL ORIENTATION ORIENTATION ORIENTATION ACTUATOR LENS LEGEND 00 No legend this location / no actuator (used with codes - in selection ) Selection required when switch requires two legends. If the two legends consist of one lens and one body legend, lens legend must be specified in selection ; body legend specified in selection. or legend options & codes, visit us at Notes: Consult factory to verify horsepower rating for your particular circuit choice. Custom colors are available. Consult factory. White imprinting is standard on black actuators; lack imprinting is standard on white, red and gray actuators. Custom colors are available, consult factory. Gloss brow is on left side of E actuator and right side of actuator. Additional ratings available. See -Series Switch Accessories page. Laser etched rocker only available with lens code Z & actuator colors black, nickel or pewter. Pewter and nickel colors only available with laser etched actuator. sales@carlingtech.com Application Support: team@carlingtech.com Phone: (0) ax: (0)

13 -Series Contura Sealed Rocker Switches - Ordering Scheme D A T 0 G P C Series Circuit Rating Termination Illumination racket 0 Color SERIES CIRCUIT Terminal Connections as viewed ( ) - momentary from bottom of switch: SP - single pole - uses terminals, &. terminal 0 terminal DP - double pole uses terminals,,,, & Terminals,, & 0 for lamp circuit only Position: SP DP &, & Connected Terminals &, & A ON NONE O (ON) NONE O C ON NONE (O) D ON NONE ON ON NONE (ON) J ON O ON K ON O (ON) L (ON) O (ON) SPECIAL CIRCUITS H* & &, & & G* &, & & O S* &, & & & M* ( &, & ) & O R* ( &, & ) & & E* & & & *Jumper between terminals & for circuits H,G,M,R & S are specified in selection. External jumper between terminals & for circuit E are provided by customer. Circuit E may be used for SP O-ON-ON circuit. DC Resistive A C 0A D 0A E 0A, 0A T (circuit,, A & D only) 0A, A T (circuit G only) M.A/0A N.A/A TERMINATION/ASE STYLE term 0 Term Termination Jumper.0 TA (QC) no barriers No A.0 TA (QC) with barriers No J K.0 TA (QC) no barriers Yes T to Solder Lug no barriers No C D Solder Lug No Wire Leads no barriers No E Wire Leads No Note: Codes J & K for circuits H, G & M. ILLUMINATION & SWITCH SEALING #:above terminals & end of switch.; # above terminals & end of switch. Positive (+) and negative (-) symbols apply to LED lamps only Sealed Unsealed s Illumination Type wired to Terminals S 0 NONE A INDEPENDENT (+) ( ) DOWN (+) ( ) C UP (+) ( ) D DOWN (+) ( ) DOWN (+) ( ) E UP (+) ( ) UP (+) ( ) INDEPENDENT (+) ( ) UP (+) ( ) G INDEPENDENT (+) ( ) UP (+) ( ) H Z INDEPENDENT (+) ( ) U Y INDEPENDENT (+) ( ) INDEPENDENT 0 (+) ( ) SINGLE POLE SWITCHES ONLY J DOWN (+) ( ) INDEPENDENT (+) ( ) K W INDEPENDENT (+) ( ) INDEPENDENT (+) ( ) DOULE POLE SWITCHES ONLY L DOWN (+) ( ) M R UP (+) ( ) N T DOWN (+) ( ) DOWN (+) ( ) P UP (+) ( ) UP (+) ( ), LAMP (SAME CODING OR OTH SELECTIONS) Selection : above terminals & ; Selection : above terminals & No lamp 0 Neon AC 0AC Incandescent LED* superbright superbright Red Amber Green Red DC A L R DC M G S DC C N H T DC D P J * Consult factory for daylight bright LED options. Typical current draw for LED is 0ma. LUSH RACKET COLOR, PANEL SEAL lack White Gray No Seal W G One Seal C Y H ACTUATOR 0 No G Contura P Contura, laser etched No Z - No Clear White Amber Green Red lue G M T bar C H N U bar/bar D J P oval E K R W oval/bar A L S Y oval/oval color for LEDs must be clear, white, or match color of LED. Green or blue lenses are not recommended with Neon lamps. ACTUATOR COLOR,, No 0 lack C Gray H Red S White Y Nickel D Pewter E ACTUATOR LENS OR ODY LEGENDS, ON O I O O ON O I O O O O O I I O N N or additional legend options & codes, visit us at LEGEND ORIENTATION 0 No legend (used with codes - in selection ) MC MA MAMC G G00 MA MC MAMC G L GL ORIENTATION ORIENTATION O ACTUATOR/LENS IN PANEL ORIENTATION ORIENTATION ORIENTATION ACTUATOR LENS LEGEND 00 No legend this location / no actuator (used with codes - in selection ) Selection required when switch requires two legends. If the two legends consist of one lens and one body legend, lens legend must be specified in selection ; body legend specified in selection. or legend options & codes, visit us at Notes: Consult factory to verify horsepower rating for your particular circuit choice. Custom colors are available. Consult factory. White imprinting is standard on black actuators; lack imprinting is standard on white, red and gray actuators. Custom colors are available, consult factory. Laser Etched rocker only available with lens code Z & actuator colors black, nickel or pewter. Additional ratings available. See -Series Switch Accessories page. Nickel and Pewter colors only available with laser etched actuator. Consult factory for laser etched lens callout. sales@carlingtech.com Application Support: team@carlingtech.com Phone: (0) ax: (0)

14 -Series Contura I & Locking Sealed Rocker Switches - Ordering Scheme D A S W 0 J Z E 00 0 Series Circuit Rating Termination Illumination Lock racket 0 unction SERIES CIRCUIT Terminal Connections as viewed ( ) - momentary from bottom of switch: SP - single pole - uses terminals, &. terminal 0 terminal DP - double pole uses terminals,,,, & Terminals,, & 0 for lamp circuit only Position: SP DP &, & Connected Terminals &, & A ON NONE O D ON NONE ON J ON O ON K ON O (ON) L (ON) O (ON) N O NONE ON DC Resistive A C 0A D 0A E 0A, 0A T (circuit,, A & D only) 0A, A T (circuit G only) M.A/0A N.A/A TERMINATION/ASE STYLE term 0 Term Termination Jumper.0 TA (QC) no barriers No A.0 TA (QC) with barriers No J K.0 TA (QC) no barriers Yes T to Solder Lug no barriers No C D Solder Lug No Wire Leads no barriers No E Wire Leads No Note: Codes J & K for circuits H, G & M. LAMP above terminals & end of switch No lamp 0 Neon AC 0AC Incandescent LED* superbright superbright Red Amber Green Red DC A L R DC M G S DC C N H T DC D P J * Consult factory for daylight bright LED options. Typical current draw for LED is 0ma. LUSH RACKET COLOR, PANEL SEAL lack White Gray No Seal W G One Seal C Y H HARD SURACE ACTUATOR CONTURA I: lack Gray Red White Left J K L M Right N P R S CONTURA : orientation above terminals:, lack Gray Red White U W Y 0 LENS Z - No Clear White Amber Green Red lue A C D E bar lens G H J K L M oval lens orientation above terminals:, color for LEDs must be clear, white, or match color of LED. Green or blue lenses are not recommended with Neon lamps.,, ILLUMINATION & SWITCH SEALING #:above terminals & end of switch.; # above terminals & end of switch. Positive (+) and negative (-) symbols apply to LED lamps only Sealed Unsealed s Illumination Type wired to Terminals S 0 NONE C UP (+) ( ) H Z INDEPENDENT (+) ( ) DOULE POLE SWITCHES ONLY M R UP (+) ( ) ACTUATOR LOCK UNCTION AND COLOR Lock Color Up Down Up & Down Center Match A H R lack J S White C K T Red D L Safety Orange E M W Gray G N LOCK Lock above terminals & end of switch. W low profile lock Y high profile lock Notes: Consult factory to verify horsepower rating for your particular circuit choice. Custom colors are available. Consult factory. White imprinting is standard on black actuators; lack imprinting is standard on white, red and gray actuators. Custom colors are available, consult factory. Only available with position circuits. Center O and special circuits only available with center position lock function. Additional ratings available. See -Series Switch Accessories page. Located at T- end of switch. Contura style only. ACTUATOR LENS OR ODY LEGEND 00 - No O ON O I O O O I N or additional legend options & codes, visit us at LEGEND ORIENTATION 0 No legend JHAY-00 JHAY-00 JHAY-00 ORIENTATION ORIENTATION O ACTUATOR/LENS IN PANEL ORIENTATION ORIENTATION P P P P P P NHAY-00 NHAY-00 NHAY-00 ORIENTATION sales@carlingtech.com Application Support: team@carlingtech.com Phone: (0) ax: (0)

15 THAACN-MCMC TLSZSC-000 THWZC- TLLHC-AH THACN-M00 TLDECC-00MG -Series Contura I WAE Sealed Rocker Switches - Ordering Scheme D G N T H A C AC 00 Series Circuit Rating Termination Illumination racket 0 Color Insert Color SERIES CIRCUIT Terminal Connections as viewed ( ) - momentary from bottom of switch: SP - single pole - uses terminals, &. terminal 0 terminal DP - double pole uses terminals,,,, & Terminals,, & 0 for lamp circuit only Position: SP DP &, & Connected Terminals &, & A ON NONE O (ON) NONE O C ON NONE (O) D ON NONE ON ON NONE (ON) J ON O ON K ON O (ON) L (ON) O (ON) SPECIAL CIRCUITS H* & &, & & G* &, & & O S* &, & & & M* ( &, & ) & O R* ( &, & ) & & E* & & & *Jumper between terminals & for circuits H,G,M,R & S are specified in selection. External jumper between terminals & for circuit E are provided by customer. Circuit E may be used for SP O-ON-ON circuit. DC Resistive A C 0A D 0A E 0A, 0A T (circuit,, A & D only) 0A, A T (circuit G only) M.A/0A N.A/A TERMINATION/ASE STYLE term 0 Term Termination Jumper.0 TA (QC) no barriers No A.0 TA (QC) with barriers No J K.0 TA (QC) no barriers Yes T to Solder Lug no barriers No C D Solder Lug No Wire Leads no barriers No E Wire Leads No Note: Codes J & K for circuits H, G & M. ILLUMINATION & SWITCH SEALING #:above terminals & end of switch.; # above terminals & end of switch. Positive (+) and negative (-) symbols apply to LED lamps only Sealed Unsealed s Illumination Type wired to Terminals S 0 NONE A INDEPENDENT (+) ( ) DOWN (+) ( ) C UP (+) ( ) D DOWN (+) ( ) DOWN (+) ( ) E UP (+) ( ) UP (+) ( ) INDEPENDENT (+) ( ) UP (+) ( ) G INDEPENDENT (+) ( ) UP (+) ( ) H Z INDEPENDENT (+) ( ) U Y INDEPENDENT (+) ( ) INDEPENDENT 0 (+) ( ) SINGLE POLE SWITCHES ONLY J DOWN (+) ( ) INDEPENDENT (+) ( ) K W INDEPENDENT (+) ( ) INDEPENDENT (+) ( ) DOULE POLE SWITCHES ONLY L DOWN (+) ( ) M R UP (+) ( ) N T DOWN (+) ( ) DOWN (+) ( ) P UP (+) ( ) UP (+) ( ) LAMP above terminals & end of switch No lamp 0 Neon AC 0AC Incandescent LED* superbright superbright Red Amber Green Red DC A L R DC M G S DC C N H T DC D P J * Consult factory for daylight bright LED options. Typical current draw for LED is 0ma. LUSH RACKET COLOR, PANEL SEAL lack White Gray No Seal W G One Seal C Y H ACTUATOR 0 No H High Insert L Low Insert 0, LENS 0 - No Z - No Clear White Amber Green Red lue C H N U ar Translucent D J P ar Transparent E K R W Oval Transparent A L S Y Oval Translucent color for LEDs must be clear, white, or match color of LED. Green or blue lenses are not recommended with Neon lamps. ACTUATOR COLOR C lack H Gray S Red Y White INSERT COLOR lack C right Chrome Plated D Satin Chrome Painted ACTUATOR LENS OR ODY LEGENDS 00 - No this location/no actuator ON O I O O ON O I O O O O O I I O N N or additional legend options & codes, visit us at N right Nickel Plated S Satin Chrome Plated T Satin Nickel Plated W White LEGEND ORIENTATION 0 No legend (used with codes - in selection ) ACTUATOR LENS LEGEND 00 No legend this location / no actuator (used with codes - in selection ) Selection required when switch requires two legends. If the two legends consist of one lens and one body legend, lens legend must be specified in selection ; body legend specified in selection. or legend options & codes, visit us at Notes: Consult factory to verify horsepower rating for your particular circuit choice. Custom colors are available. Consult factory. White imprinting is standard on black actuators. lack imprinting is standard on white, red and gray actuators. Custom colors are available, consult factory. Additional ratings available. See -Series Switch Accessories page. sales@carlingtech.com Application Support: team@carlingtech.com Phone: (0) ax: (0)

16 -Series Contura II Sealed Rocker Switches - Ordering Scheme D A T 0 Termination Illumination Rating 0 Color 0 00 Selection : above terminals & ; Selection : above terminals & SP DP &, & Connected Terminals &, & A ON NONE O (ON) NONE O C ON NONE (O) D ON NONE ON ON NONE (ON) J ON O ON K ON O (ON) L (ON) O (ON) SPECIAL CIRCUITS H* & &, & & G* &, & & O S* &, & & & M* ( &, & ) & O R* ( &, & ) & & E* & & & *Jumper between terminals & for circuits H,G,M,R & S are specified in selection. External jumper between terminals & for circuit E are provided by customer. Circuit E may be used for SP O-ON-ON circuit. DC Resistive A 0A 0A 0A, 0A T (circuit,, A & D only) 0A, A T (circuit G only).a/0a.a/a TERMINATION/ASE STYLE #:above terminals & end of switch.; # above terminals & end of switch. Positive (+) and negative (-) symbols apply to LED lamps only Sealed Unsealed s Illumination Type wired to Terminals S 0 NONE A INDEPENDENT (+) ( ) DOWN (+) ( ) C UP (+) ( ) D DOWN (+) ( ) DOWN (+) ( ) E UP (+) ( ) UP (+) ( ) INDEPENDENT (+) ( ) UP (+) ( ) G INDEPENDENT (+) ( ) UP (+) ( ) H Z INDEPENDENT (+) ( ) U Y INDEPENDENT (+) ( ) INDEPENDENT 0 (+) ( ) SINGLE POLE SWITCHES ONLY J DOWN (+) ( ) INDEPENDENT (+) ( ) K W INDEPENDENT (+) ( ) INDEPENDENT (+) ( ) DOULE POLE SWITCHES ONLY L DOWN (+) ( ) M R UP (+) ( ) N T DOWN (+) ( ) DOWN (+) ( ) P UP (+) ( ) UP (+) ( ) lack C No Seal One Seal White W Y Gray G H ACTUATOR ORENTATION AOE TERMINALS ACTUATOR 0 Z No Contura II,, STANDARD 0 LENS color for LEDs must be clear, white, or match color of LED. Green or blue lenses are not recommended with Neon lamps. 0 - No Z - No White Amber Green Red lue style & location G M T C H N U D J P E K R W A L S Y ACTUATOR COLOR/THUM PRINT COLOR O H Y C S N/A - No Grey/lack White/lack lack/lack Red/lack ORIENTATION ILLUMINATION & SWITCH SEALING Jumper No No Yes T to No No No No LUSH RACKET COLOR, PANEL SEAL ORIENTATION term 0 Term Termination.0 TA (QC) no barriers A.0 TA (QC) with barriers J K.0 TA (QC) no barriers Solder Lug no barriers C D Solder Lug Wire Leads no barriers E Wire Leads Note: Codes J & K for circuits H, G & M. * Consult factory for daylight bright LED options. Typical current draw for LED is 0ma. ACTUATOR LENS OR ODY LEGENDS ON O I O O ON O I O O O O N N O I I O or additional legend options & codes, visit us at ORIENTATION LEGEND ORIENTATION 0 No legend (used with codes - in selection ) AA AA- ORIENTATION ORIENTATION superbright Red R S T ORIENTATION SP - single pole - uses terminals, &. DP - double pole uses terminals,,,, &. Terminals,, & 0 for lamp circuit only. superbright Green G H J ORIENTATION ( ) - momentary ORIENTATION Terminal Connections as viewed from bottom of switch: terminal 0 terminal No lamp 0 Neon AC 0AC Incandescent LED* Red Amber DC A L DC M DC C N DC D P ORIENTATION CIRCUIT C D E M N, LAMP (same coding for both selections) SERIES Position: Z R C 00 racket ORIENTATION Circuit ORIENTATION Series AA AA- ORIENTATION ACTUATOR LENS LEGEND 00 No legend this location / no actuator (used with codes - in selection ) Selection required when switch requires two legends. If the two legends consist of one lens and one body legend, lens legend must be specified in selection ; body legend specified in selection. or legend options & codes, visit us at Notes: Consult factory to verify horsepower rating for your particular circuit choice. Custom colors are available. Consult factory. White imprinting is standard on black actuators. lack imprinting is standard on white, red and gray actuators. Custom colors are available, consult factory. Additional ratings available. See -Series Switch Accessories page. s available for lighted oval lens version only sales@carlingtech.com Application Support: team@carlingtech.com Phone: (0) ax: (0)

17 ORIENTATION -Series Contura X, XI & XII Sealed Rocker Switches - Ordering Scheme D A 0 P Z Series Circuit Rating Termination Illumination racket 0 SERIES CIRCUIT Terminal Connections as viewed ( ) - momentary from bottom of switch: SP - single pole - uses terminals, &. terminal 0 terminal DP - double pole uses terminals,,,, & Terminals,, & 0 for lamp circuit only Position: SP DP &, & Connected Terminals &, & A ON NONE O (ON) NONE O C ON NONE (O) D ON NONE ON ON NONE (ON) J ON O ON K ON O (ON) L (ON) O (ON) SPECIAL CIRCUITS H* & &, & & G* &, & & O S* &, & & & M* ( &, & ) & O R* ( &, & ) & & E* & & & *Jumper between terminals & for circuits H,G,M,R & S are specified in selection. External jumper between terminals & for circuit E are provided by customer. Circuit E may be used for SP O-ON-ON circuit., LAMP (same coding for both selections) Selection : above terminals & ; Selection : above terminals & No lamp 0 Neon AC 0AC Incandescent LED* superbright superbright Red Amber Green Red DC A L R DC M G S DC C N H T DC D P J * Consult factory for daylight bright LED options. Typical current draw for LED is 0ma. RACKET COLOR, PANEL SEAL (EXTERNAL OAM GASKET) X & XI w/lush racket X, XI, XII w/raised racket # of gaskets 0 0 lack C D White W Y Z Gray G H J ACTUATOR No 0 lack Gray White Red Contura X Contura XI Contura XII J K N M orientation above terminals:,, DC Resistive A C 0A D 0A E 0A, 0A T (circuit,, A & D only) 0A, A T (circuit G only) M.A/0A N.A/A TERMINATION/ASE STYLE term 0 Term Termination Jumper.0 TA (QC) no barriers No A.0 TA (QC) with barriers No J K.0 TA (QC) no barriers Yes T to Solder Lug no barriers No C D Solder Lug No Wire Leads no barriers No E Wire Leads No Note: Codes J & K for circuits H, G & M. ILLUMINATION & SWITCH SEALING #:above terminals & end of switch.; # above terminals & end of switch. Positive (+) and negative (-) symbols apply to LED lamps only Sealed Unsealed s Illumination Type wired to Terminals S 0 NONE A INDEPENDENT (+) ( ) DOWN (+) ( ) C UP (+) ( ) D DOWN (+) ( ) DOWN (+) ( ) E UP (+) ( ) UP (+) ( ) INDEPENDENT (+) ( ) UP (+) ( ) G INDEPENDENT (+) ( ) UP (+) ( ) H Z INDEPENDENT (+) ( ) U Y INDEPENDENT (+) ( ) INDEPENDENT 0 (+) ( ) SINGLE POLE SWITCHES ONLY J DOWN (+) ( ) INDEPENDENT (+) ( ) K W INDEPENDENT (+) ( ) INDEPENDENT (+) ( ) DOULE POLE SWITCHES ONLY L DOWN (+) ( ) M R UP (+) ( ) N T DOWN (+) ( ) DOWN (+) ( ) P UP (+) ( ) UP (+) ( ) Notes: Consult factory to verify horsepower rating for your particular circuit choice. Custom colors are available. Consult factory. White imprinting is standard on black actuators; lack imprinting is standard on white, red & gray actuators. Custom colors are available, consult factory. With square lenses, use sel. for lens above lamp, & selection for lens above lamp. Additional ratings available. See -Series Switch Accessories page. Not available with Contura XI rockers. 0 LENS - AOE LAMP # TERMINALS, LENS - AOE LAMP # TERMINALS, 0 - No Z - No Clear White Amber Green Red lue Style D J P ar E K R W One piece Square A L S Y Two piece Square* (w/ clear top protective lens) C H N U Two piece Square* (w/ smoke top protective lens) G M T Two piece Square* (w/ white top protective lens) * All bottom lenses are molded of opaque material. Consult factory for other lens colors. color for LEDs must be clear, white, or match color of LED. Green or blue lenses are not recommended with Neon lamps. ACTUATOR LENS OR ODY LEGEND 00 - No this location/no actuator ON O I O O ON O I O O O O O I I O N N O ON O I O O O I N or additional legend options & codes, visit us at LEGEND ORIENTATION 0 No legend (used with codes - in selection ) G A ZZG-A G ZZG-00 MA MC MA-MC MA-MC MA MC Z ORIENTATION ACTUATOR LENS LEGEND 00 No legend this location / no actuator (used with codes - in selection ) Selection required when switch requires two legends. If the two legends consist of one lens and one body legend, lens legend must be specified in selection ; body legend specified in selection. or legend options & codes, visit us at ORIENTATION ORIENTATION O ACTUATOR/LENS IN PANEL ORIENTATION sales@carlingtech.com Application Support: team@carlingtech.com Phone: (0) ax: (0)

18 -Series Contura X Locking Sealed Rocker Switches - Ordering Scheme D A S W 0 P 00 0 Series Circuit Rating Termination Illumination Lock racket 0 unction SERIES CIRCUIT Terminal Connections as viewed ( ) - momentary from bottom of switch: SP - single pole - uses terminals, &. terminal 0 terminal DP - double pole uses terminals,,,, & Terminals,, & 0 for lamp circuit only Position: SP DP &, & Connected Terminals &, & A ON NONE O D ON NONE ON J ON O ON N O NONE ON SPECIAL CIRCUITS H* & &, & & G* &, & & O S* &, & & & E* & & & *Jumper between terminals & for circuits H,G,M,R & S are specified in selection. External jumper between terminals & for circuit E are provided by customer. Circuit E may be used for SP O-ON-ON circuit. DC Resistive A C 0A D 0A E 0A, 0A T (circuit,, A & D only) 0A, A T (circuit G only) M.A/0A N.A/A TERMINATION/ASE STYLE term 0 Term Termination Jumper.0 TA (QC) no barriers No A.0 TA (QC) with barriers No J K.0 TA (QC) no barriers Yes T to Solder Lug no barriers No C D Solder Lug No Wire Leads no barriers No E Wire Leads No Note: Codes J & K for circuits H, G & M. ILLUMINATION & SWITCH SEALING #:above terminals & end of switch.; # above terminals & end of switch. Positive (+) and negative (-) symbols apply to LED lamps only Sealed Unsealed s Illumination Type wired to Terminals S 0 NONE C UP (+) ( ) H Z INDEPENDENT (+) ( ) DOULE POLE SWITCHES ONLY M R UP (+) ( ) LOCK Lock above terminals & end of switch. W lock Notes: Consult factory to verify horsepower rating for your particular circuit choice. Custom colors are available. Consult factory. White imprinting is standard on black actuators; lack imprinting is standard on white, red and gray actuators; Custom colors are available, consult factory. Located over T- end of switch. Additional ratings available. See -Series Switch Accessories page. Located over T- end of switch., LAMP (same coding for both selections) Selection : above terminals & ; Selection : above terminals & No lamp 0 Neon AC 0AC Incandescent LED* superbright superbright Red Amber Green Red DC A L R DC M G S DC C N H T DC D P J * Consult factory for daylight bright LED options. Typical current draw for LED is 0ma. LUSH RACKET COLOR, PANEL SEAL lack White Gray No Gasket One Gasket HARD SURACE ACTUATOR Contura X lack ACTUATOR LOCK UNCTION AND COLOR Lock Color Up Down Up & Down Match A H R lack J S White C K T Red D L Gray E M W Safety Orange N Y ACTUATOR LENS OR ODY LEGEND 00 - No O ON O I O O O I N or additional legend options & codes, visit us at LEGEND ORIENTATION 0 No legend (used with codes - in selection ) PM- Grey Red White orientation above terminals:, 0 LENS - AOE LAMP # TERMINALS Z - No Clear White Amber Green Red lue Style D J P ar E K R W One piece Square A L S Y Two piece Square* (w/ clear top protective lens) C H N U Two piece Square* (w/ smoke top protective lens) G M T Two piece Square* (w/ white top protective lens) * All bottom lenses are molded of opaque material. Consult factory for other lens colors. color for LEDs must be clear, white, or match color of LED. Green or blue lenses are not recommended with Neon lamps., MC K- DMC- sales@carlingtech.com Application Support: team@carlingtech.com Phone: (0) ax: (0)

19 -Series Contura XI Sealed Rocker Switches - Ordering Scheme D C 0 A P C A 00 Series Circuit Rating Termination Illumination racket 0 Color, s SERIES CIRCUIT Terminal Connections as viewed ( ) - momentary from bottom of switch: SP - single pole - uses terminals, &. terminal 0 terminal DP - double pole uses terminals,,,, & Terminals,, & 0 for lamp circuit only Position: SP DP &, & Connected Terminals &, & A ON NONE O (ON) NONE O C ON NONE (O) D ON NONE ON ON NONE (ON) J ON O ON K ON O (ON) L (ON) O (ON) SPECIAL CIRCUITS H* & &, & & G* &, & & O M* ( &, & ) & O R* ( &, & ) & & E* & & & S* &, & & & *Jumper between terminals & for circuits H,G,M,R & S are specified in selection. External jumper between terminals & for circuit E are provided by customer. Circuit E may be used for SP O-ON-ON circuit. DC Resistive A C 0A D 0A E 0A, 0A T (circuit,, A & D only) 0A, A T (circuit G only) TERMINATION / ASE STYLE term 0 Term Termination Jumper.0 TA (QC) no barriers No A.0 TA (QC) with barriers No J K.0 TA (QC) no barriers Yes T to Solder Lug no barriers No C D Solder Lug No Wire Leads no barriers No E Wire Leads No Note: Codes J & K for circuits H, G & M. ILLUMINATION #:above terminals & end of switch.; # above terminals & end of switch. Positive (+) and negative (-) symbols apply to LED lamps only s Illumination Type wired to Terminals S NONE A INDEPENDENT (+) ( ) DOWN (+) ( ) C UP (+) ( ) D DOWN (+) ( ) DOWN (+) ( ) E UP (+) ( ) UP (+) ( ) INDEPENDENT (+) ( ) UP (+) ( ) G INDEPENDENT (+) ( ) UP (+) ( ) H INDEPENDENT (+) ( ) SINGLE POLE SWITCHES ONLY J DOWN (+) ( ) INDEPENDENT (+) ( ) K INDEPENDENT (+) ( ) INDEPENDENT (+) ( ) DOULE POLE SWITCHES ONLY L DOWN (+) ( ) M UP (+) ( ) N DOWN (+) ( ) DOWN (+) ( ) P UP (+) ( ) UP (+) ( ) U INDEPENDENT (+) ( ) INDEPENDENT 0 (+) ( ) & LAMP No lamp 0 Neon AC 0AC Incandescent LED* superbright superbright Red Amber Green Red DC A L R DC M G S DC C N H T DC D P J * Consult factory for daylight bright LED options. Typical current draw for LED is 0ma. RACKET COLOR & PANEL SEAL Color No Gasket Gasket Gasket lack C D Gray G H J White W Y Z ACTUATOR STYLE 0 No - urnished separately A Contura XI Contura XI - Laser Etched 0 LENS COLOR / STYLE 0 - No Z - No Clear White Amber Green Red lue G M T C H N U D J P E K R W A L S Y PAD Printed A N/A N/A N/A N/A Laser-Etched color for LEDs must be clear, white, or match color of LED. Green or blue lenses are not recommended with Neon lamps. ACTUATOR COLOR O N/A - No C lack S Red Y White ACTUATOR LENS or ODY LEGEND 00 - No this location/no actuator ON O I O O ON O I O O O O O I I O N N LEGEND ORIENTATION 0 No legend ACTUATOR / LENS LEGEND 00 No legend this location / no actuator (used with codes - in selection ) Selection required when switch requires two legends. If the two legends consist of one lens and one body legend, lens legend must be specified in selection ; body legend specified in selection. or legend options & codes, visit us at Notes: Consult factory to verify horsepower rating for your particular circuit choice. Custom colors are available. Consult factory. White imprinting is standard on black actuators; lack imprinting is standard on white, red and gray actuators. Additional ratings available. See -Series Switch Accessories page. sales@carlingtech.com Application Support: team@carlingtech.com Phone: (0) ax: (0)

20 0 -Series Contura Sealed Rocker Switch s Separately Reduce inventory levels and cost by stocking actuators and base switches separately. Contura II, III, I,, I, II, X, XI, XII, XI ase switches separately: specify with code selections - in the ordering schemes. Contura II, III, I, only: with code A or C for selection, & with selections 0- in the ordering schemes. Contura I with lenses and inserts only: with code selections - Contura II, III, I,, II only: with code A, C, E, G, P or Z for selection & with selections 0- in the ordering schemes. Contura X, XI, XII, XI actuators with lenses separately: with code selections - in the ordering schemes. Panel Seal: PS Contura X & XI actuators without lenses separately: R Separately Style/Color Opening Contura XII actuators without lenses separately: 00 P J Z 00 Style & Color Opening Opening CONTURA X & XI ACTUATOR SEPARATELY R CONTURA XII ACTUATOR SEPARATELY P ACTUATOR STYLE & COLOR Contura X Contura XI lack Gray LENS OPENING OR One bar lens One bar lenses One square lens two square lens ACTUATOR LENS OR ODY LEGEND 00 - No this location ON O I O O ON O I White square lens on top/ bar lens on bottom (Contura X only) O O O O O I I O N N or additional legend options & codes, visit us at LEGEND ORIENTATION 0 No legend ORIENTATION Red ORIENTATION O ACTUATOR/LENS IN PANEL ORIENTATION ORIENTATION ORIENTATION ACTUATOR STYLE & COLOR J lack K Gray N White M Red, LENS OPENING OR Z No lens ar lens Square lens, LENS OR ODY LEGEND 00 - No O ON O I O O O I N or additional legend options & codes, visit us at LEGEND ORIENTATION 0 No legend Separately Style Color ORIENTATION O ACTUATOR/LENS IN PANEL ORIENTATION Contura X, XI & XII actuator lens assembly separately: L 00 0 ORIENTATION Contura X, XI & XII top piece of -piece lens separately: T Separately Color TOP O LENS SEPARATELY T COLOR Clear Smoke White Contura X, XI & XII actuator lens assembly: actuator stem posts mount toward actuator stem top lens two piece } lens assembly bottom lens CONTURA X, XI & XII LENS SEPARATELY L LENS STYLE ar lens One Piece Square lens ottom of Two-Piece Square lens TRANSLUCENT LENS COLOR Clear White Amber Green Red lue LENS OR ODY LEGEND 00 - No O ON O I O O O I N or additional legend options & codes, visit us at piece lens/bar lens are positioned the same as bottom lens for assembly, minus the top lens. es snap in from bottom. Notes: If actuator lens opening for bar or square lenses, legend orientation 0,, or must be chosen. Center of actuator marking not available for Contura XII. is not available for bar style lens. Not recommended with neon lamps. Must also order top piece of piece square lens separately. LEGEND ORIENTATION 0 No legend ORIENTATION ORIENTATION O ACTUATOR/LENS IN PANEL ORIENTATION ORIENTATION ORIENTATION sales@carlingtech.com Application Support: team@carlingtech.com Phone: (0) ax: (0)

21 -Series Contura Sealed Rocker Switch Accessories Easily integrate Contura products into your system, with Contura Accessories Contura Connectors COMPANY SERIES PACKARD SERIES PACKARD METRI-PACK 0 SERIES AMP 0 SERIES ASTIN-ASTON Q.C. SELECTION GUIDE WIRE PART NO RANGE PLAIN RASS TIN PLATED RASS AWG MM (RE).0 ()- () ()- () () () ORIEN- TATION NOTE: Consult Delphi Packard and/or Amp on actual part numbers and availability. AMP is a registered trademark of AMP Inc. Harrisburg, PA Delphi Packard is a registered trademark of Delphi-Packard Electrical Systems Warren, Ohio A TANG TANG SYMOL = SHOWS ORIENTATION O TANG IN SLOT SYMOL.0[0.].0[0.].0[.].0[.].0[.].0[.] A PACKARD 0 C PACKARD 0 A C C C A PACKARD 0.0[.] A PACKARD 0 AMP, PACKARD 0 AMP, PACKARD AMP 0 AMP AMP, PACKARD AMP, PACKARD.[.].[.].[.].[.].0[.] MARKING DETAIL RONT IEW MARKING DETAIL REAR IEW MARKING DETAIL RONT IEW MARKING DETAIL REAR IEW MARKING DETAIL RONT IEW MARKING DETAIL REAR IEW C CONNECTOR HOUSING C CONNECTOR HOUSING (or AMP terminals only) CH CONNECTOR HOUSING Contura X oot (P/N -0).000[0.0]. [0.] TOP TOP.00[.].[.] Contura II, III, I & Removal Tool (P/N RT) INSERT POINTS UNDER ACTUATOR HOLD LUSH ON RACKET AND PUSH IN.00 [.] Additional -Series DC Resistive 0A 0AC / HP, A AC / HP, No Agency Listings 0A 0AC / HP, A AC / HP, UL Recognized, CSA Certified A AC / HP, ()A AC μ T A AC / HP, ()A AC T 0A 0AC, A AC, / HP -0AC, ()A 0 AC μ T 0A 0AC, A AC, / HP -0AC, ()A 0 AC T A C 0A D 0A E 0A, 0A T (circuits,, A, & D only) 0A, A, T (circuit G only) G 0A H 0A L A AC, 0A 0AC, / HP -0 AC; A AC L M.A/0A (combi-contact) (combination gold/silver contacts for borderline dry circuit applications) N.A/A (combi-contact) (combination gold/silver contacts for borderline dry circuit applications) NOTES Consult factory to determine availability for individual circuits and their HP rating.. Not avaiable with Contura or rocker styles.. Ratings - are UL, CSA & DE certified, require terminations A or for double pole circuits, & are not available with illumination circuits,, D, J, N, & T or with wire lead or solder lug terminations. Circuits,, A, D, H, M & E are not available with rating &. Rating & only available with circuits,, A & D. Circuits,,,,, K, L are / HP 0AC only with rating. Ratings & must specify lamp code (AC neon). Ratings & must specify lamp code (0AC neon). Rating L available with circuits,, A & D only. sales@carlingtech.com Application Support: team@carlingtech.com Phone: (0) ax: (0)

22 -Series Contura Sealed Rocker Switch Accessories Contura Mounting Panels Dimensional Specifications: in. [mm] Contura Hole Plug Dimensional Specifications: in. [mm].0 [.].0 [.0] TEST CUT HOLE IN ACTUAL MATERIAL HP CONTURA II,III HOLE PLUG.000 [0.0].0 [0.] HP CONTURA II,III HOLE PLUG.0 [.] H STANDARD HOLE PLUG (No wing serrations) (With C connector attached).0 [.0] H STANDARD HOLE PLUG (With wing serrations).0 [.0]. [.] H CONTURA I HOLE PLUG (No wing serrations) H CONTURA I HOLE PLUG (With wing serrations) DETAIL IEW H,H & H HOLE PLUGS (No wing serrations for ease of removal).00 [.] H CONTURA HOLE PLUG (No wing serrations) H CONTURA HOLE PLUG (With wing serrations) DETAIL IEW H,H & H HOLE PLUGS (With wing serrations) sales@carlingtech.com Application Support: team@carlingtech.com Phone: (0) ax: (0)