This document outlines the features available in the release of Leapfrog Works 2.1. System requirements, upgrade notes and information for Network
|
|
- Agnes Fowler
- 5 years ago
- Views:
Transcription
1 This document outlines the features available in the release of Leapfrog Works 2.1. System requirements, upgrade notes and information for Network Administrators can be found at the end of this document. For Leapfrog Works support visit my.leapfrog3d.com or contact the Leapfrog Works Team at
2 Overview 3 Introduction 3 Hydrogeology Solution Kit 3 My Leapfrog 3 Central 3 View 3 Leapfrog Viewer 3 3D Implicit Modelling 3 Supported Inputs 4 Supported Outputs 4 Release Information 4 New features in Leapfrog Works IFC for BIM workflows 5 Integrated demonstration project 5 My Leapfrog integration 6 DWG interoperability 7 Object history properties 7 Central publishing improvements 8 Design handling improvements 8 Mesh clean up improvements 9 Borehole Hatching on cross sections 9 Arrange labels on cross sections 10 Evaluate lines on cross sections 10 Variable borehole radius scaling 10 Planned borehole groups 11 Structural data analysis 11 Statistics improvements 12 Issues Addressed 12 Upgrade Notes 13 Project Upgrades 13 Network Administration 14 Installation path change 14 Updated endpoints for whitelisting 14 Leapfrog Start 14 Test web-services from Leapfrog Works 14 Symantec may block installation 14 System Requirements 15 Seequent Limited
3 OVERVIEW Introduction Leapfrog Works brings the power of Leapfrog s implicit 3D modelling and visualisation capabilities together with new product features, to enable easy-to-use workflows for ground engineers and environmental scientists in the Civil and Environmental sectors. Hydrogeology Solution Kit Leapfrog Works is available with an optional Hydrogeology Solution Kit for interoperability with FEFLOW and ModFLOW flow modelling software. Hydrogeology can be turned on at run time if your organisation s license administrator has authorised you to use this product. My Leapfrog My Leapfrog ( is your go-to location for online resources to support you in your use of Leapfrog Works. Your My Leapfrog credentials are also used by Leapfrog Works to access software licences that you are entitled to run. This provides flexible and scalable software deployment for everyone from local consultants to multinational corporations. Central Leapfrog Works 2.1 is compatible with Central 2.0 for continuous model management, review and collaboration. View Share interactive 3D views of your model directly to a web-browser. Upload focused views and freely sharing scenes and engage in stakeholder collaboration anywhere in the world without the need for colleagues, clients or partners to install software. View has a new look coming soon, so keep an eye out. Leapfrog Viewer Leapfrog Works 2.1 is compatible with Leapfrog Viewer 4.11 for freely sharing complex scenes and providing model deliverables to clients. 3D Implicit Modelling Leapfrog Works is founded upon Leapfrog implicit modelling engine with FastRBF. It supports modelling contact surfaces and volumes using stratigraphic sequences, structural surfaces, depositions, intrusions, erosions, veins, vein systems and faults. It also supports numeric modelling. Models are dynamically linked to input data, so that as new data or interpretation become available updating the model is automatic. Seequent Limited
4 Supported Inputs Leapfrog Works supports the input of borehole data, geotechnical data, engineering designs, well screens, meshes, surfaces, points, polylines, GIS data, 2D grids, structural data, maps, images and historical cross sections. The Leapfrog Works Hydrogeology Solution Kit also supports input of flow models. Supported Outputs Leapfrog Works supports the output of 3D surfaces and volumes in CAD and BIM formats, planned boreholes, borehole tables, longitudinal sections and cross sections, points, polylines, GIS lines, 3D scene files for viewing in Leapfrog Viewer, structural data, and publishing to Leapfrog Central. The Leapfrog Works Hydrogeology Solution Kit also supports output of flow model grids. Release Information These release notes cover the new features introduced in version 2.1 of Leapfrog Works. For more information on any of the features please refer to the Leapfrog Works 2.1 Help. Seequent Limited
5 NEW FEATURES IN LEAPFROG WORKS 2.1 IFC for BIM workflows Industry Foundation Class (IFC) is the open industry standard for 3D models in Building Information Model (BIM) workflows and projects. The BIM philosophy is that all parties have access to a combined 3D model that incorporates all aspects of the project, so that potential clashes, or the impact of a change in one design on other elements can be identified and mitigated more efficiently. You can now export geological models, numeric models and combined models directly to IFC format for integration of the ground model in BIM common data environments. This allows everyone on the project to visualise the interaction of the planned building project with the ground model. Integrated demonstration project To help those just getting started with geological modelling, Leapfrog Works now includes a preinstalled demonstration model, complete with helpful comments to guide you around the model and link you to help and online training resources. Seequent Limited
6 My Leapfrog integration It is now even easier to access all your web-based services from within Leapfrog Works when you log in with your My Leapfrog credentials. You are automatically signed in and a connection established when you publish a 3D scene to a web browser via View. You can also access your My Leapfrog profile and keep it up to date online, see your product entitlements and active product licenses, anytime while you are running Works. To control your usage and avoid any necessary user day charges, the software will now suspend after it has been idle for the set period. The default setting is for 60 mins, but this is easily adjusted to suit your own needs. To track and manage software usage in your organisation, reference code management has been improved so that you can set policy to be reminded to enter a code, and if desired, even forced to enter the code, so that you can be sure you are compiling with your company policy on project tracking. Simply build a list of project codes and select from the dropdown. No more typing and re-typing codes when you switch between jobs. All your usage can be viewed in the license monitor in My Leapfrog. License administrators can view the usage trends across the whole organisation. Seequent Limited
7 DWG interoperability The Autodesk drawing (DWG) format is a common Computer-aided Design (CAD) format native to Autodesk but also supported in many other CAD and technical software products. As well as supporting the importation of engineering designs and surfaces in DWG format you can also now export models, meshes, lines, points and cross section evaluations in DWG format. Export your geological model and numeric models or surfaces for inclusion in Autodesk BIM workflows with Navisworks, Revit or BIM 360 or export 2D section evaluations for further layout in AutoCAD or Civil3D. Object history properties Tracing the origin of the data used in your model is now easy with the addition of a history tab in an object s properties. See who created or last processed a mesh or model and when. For imported data file paths are recorded so that later you have confidence in the origin of the data and can demonstrate its provenance during an audit. Note that objects created in early versions of Leapfrog Works do not have history records. Seequent Limited
8 Central publishing improvements You can now publish a host of additional data types in your Centrally managed models for a single source of truth, that is more collaborative than ever. Now publish GIS data, Textures, Images, Cross sections, Lines and export directly from the Central browser for use in other applications. Design handling improvements A number of improvements have been made to the way designs are handled so you can manage complex designs in your Leapfrog Models. You can now Reload a design Move all or part of a design Manage and display colour legends for designs Multiselect designs on import Seequent Limited
9 Mesh clean up improvements Design surfaces and imported meshes may have overlapping triangles (known as self-intersections) that prevent the mesh from being usable in further mesh operations, such as those used in workflows for determining cut and fill volumes for excavation. An option has been added to remove self-intersections such as these shown on the left-hand side below, to create closed meshes such as that on the right. Borehole Hatching on cross sections When laying out cross sections it is now possible to display hatching on boreholes. Selecting from industry standard hatch patterns makes it easy to deliver cross sections to the standard your clients expect. Seequent Limited
10 Arrange labels on cross sections Where multiple boreholes are evaluated in a confined space, cross section layouts can become hard to read or even overlap. Now it is easy to arrange the collar labels into a custom composition by simply dragging the collar labels to the desired location. Evaluate lines on cross sections It is now possible to evaluate lines on to cross sections such as GIS lines representing as roads, rivers or utilities, and design lines such as pipelines, property boundaries or alignments. Assign symbology to the pierce point where the line intersects the cross section, to provide context when presenting geological cross sections. Variable borehole radius scaling When visualising downhole numerical data you can now scale the width of the borehole cylinder by another column of data values from your borehole database. This provides at a glance visualisation of related factors like cone resistance and friction ratio, or storativity and porosity, in the 3D scene. Seequent Limited
11 Planned borehole groups Planned boreholes are now managed in groups for greater efficiency and consistency when preparing for future ground investigations. Evaluate the expected ground types that will be encountered in the group and view the evaluation in the 3D scene. Import planned boreholes or export them for contractors as either a parameter set or standard interval tables. Structural data analysis For analysis of structural data trends in non-directional (axial) structures such as those found in highly folded geology, Bingham statistics have been added as an option on stereonets. For directional (polar) data Fisher statistics are still available. Seequent Limited
12 Statistics improvements A Table of Statistics option has been added to Statistics. Together with other improvements this provides more options and controls when working with statistics and graphs. Multiple categories can be populated and grouped Statistics columns can be selected Both interval length-weighted and un-weighted statistics can be displayed Query filters can be applied Histograms can be accessed directly from the numeric data column Data shown in plots is linked to data in the 3D scene so that you can select in the plot and visualise the selected dataset in the scene, and vice versa. ISSUES ADDRESSED The following noteworthy issues have been addressed in this release An issue with not being able to visualise data in the 3D scene following a Windows 10 update has been resolved An issue where designs with swept arcs of less than 15 o were imported as straight segments has been resolved An issue with rendered images not displaying correctly has been resolved A range of issues with evaluating boreholes on sections have been resolved You can now view collars with null z valued when projected onto the topography An issue with exported dxfs with long names not being recognised in other software is now resolved An issue when upgrading old projects with refined models in some cases has been resolved Seequent Limited
13 UPGRADE NOTES Project Upgrades Leapfrog Works 2.1 supports direct project upgrades from earlier Leapfrog Works versions. Leapfrog Works can convert and upgrade Leapfrog Geo projects from version 2.0 or later, Leapfrog Geothermal 2.6 or later, and Leapfrog Hydro from version 2.2 or later. This will convert the projects to Leapfrog Works 2.1 projects. It is recommended to make a backup when prompted during the process as Leapfrog Works Projects cannot be converted back into Leapfrog Geo or Geothermal projects. When upgrading to version 2.1 Planned boreholes will upgrade into groups. Prognoses will reprocess to become model evaluations. In certain situations, Borehole correlation, and GIS polygons may reprocess on upgrade. This could cause dependent models to reprocess. Layered designs, FEFLOW grids and stereonets will reprocess on upgrade which will likely cause dependent objects to also reprocess. Seequent Limited
14 NETWORK ADMINISTRATION Installation path change The default installation path for Leapfrog products is now C:\Program Files\Seequent Updated endpoints for whitelisting Leapfrog Works communicates with the following endpoints to access web services required for the smooth operation of the software If earlier versions of Leapfrog Works required whitelisting in order to operate in your network environment it may be necessary to adjust whitelisting to include Leapfrog Start Leapfrog Start tests access to Leapfrog web services from within your current network environment and creates a report of any issues for review by a Network administrator or Leapfrog representative. Leapfrog Works, Central, View and My Leapfrog either rely on, or are themselves, webservices that together provide a seamless experience for product use combined with help and support resources for users. To get Leapfrog Start and learn how it validates Leapfrog operation in your network refer to Information for Network Administrators. Leapfrog Start 1.1 is compatible with Leapfrog Works 2.1. Test web-services from Leapfrog Works You can request Leapfrog users to run the test webservices option directly from the main menu in Leapfrog Works. This performs the relevant checks based on the user s current configuration and license type and lets them save a copy of the report for your review as well as automatically providing the report to Seequent. Symantec may block installation New versions of Leapfrog Works may be blocked from installing by Symantec security software. To advise Symantec to allow installation of Leapfrog Works please go to to submit a false positive report. Seequent Limited
15 SYSTEM REQUIREMENTS Operating System 1,2 Processor, Supported Windows 7 (64bit) Windows 8 (64bit) Windows 8.1 (64bit) Windows 10 (64bit) Intel Core TM i3,i5 or i7 CPU (2nd generation or later) Intel Xeon TM Recommended Windows 7 (64bit) Windows 8.1 (64bit) Windows 10(64bit) Intel Core TM i7-6800k Intel Core TM i7-6900k Intel Core TM i Intel Xeon TM E v3 System Memory 4 GB (Minimum) 32 GB RAM Free hard disk space Display resolution Graphics 5 Legacy spinning hard disk 250 GB capacity 25 GB free space 1280 x 720 (Minimum) Single display unit Nvidia TM (Desktop hardware) GeForce 700 series 3 GeForce 900 series 3 GeForce 1000 series 3 Quadro 600 series and above Quadro K series 3 Quadro P series 3 Nvidia TM (Mobile hardware) GeForce 700M series 3 GeForce 800M series 3 GeForce 900M series 3 GeForce 1000 series 3 Quadro M series 3 Quadro P mobile series AMD TM / ATI TM (Desktop hardware) Radeon HD 8000 series 3 Radeon R5 series 3 Radeon R7 series 3 Radeon R9 series 3 Radeon RX series 3 Firepro V series 3 Firepro W series 3 AMD TM / ATI TM (Mobile hardware) Radeon HD 8000 series 3 Radeon R5 series 3 Radeon R7 series 3 Radeon R9 series 3 Radeon RX series 3 FirePro M series Solid state disk drive 1 TB Capacity 100 GB free space 1920 x 1080 (HD) or better Multiple display setup GeForce GTX 950i 4 GeForce GTX 1050Ti 4 GeForce GTX GeForce GTX 950M 4 GeForce GTX 1050M 4 Radeon RX Radeon RX Radeon R9 M375 4 Radeon RX Notes: Intel TM Integrated Graphics HD Graphics (Generation 2 or later) HD Graphics 510 (Generation 6 or later) 1 Running Leapfrog in virtualised environment is not supported 2 Running Leapfrog via a remote desktop connection or other remote login system is not supported 3 Opening Leapfrog projects over a network connection is not supported 4 Graphics processor must have at least 512 MB memory 5 Touch-screen hardware is not supported LEAPFROG and SEEQUENT are registered trade marks or trade marks of Seequent Limited. All other product and company names are trade marks or registered trade marks of their respective holders. Use of these trade marks does not imply any ownership of these trade marks or any affiliation or endorsement by the holders of these trade marks. Seequent Limited
16 Download the latest version here Contact us at COMPLEXITY TO CLARITY Seequent is a global leader in the development of visual data science software and collaborative technologies. Seequent Limited 2018 seequent.com leapfrog3d.com blockbustersuite.com 16
2.0. Technical Release Notes
LEAPFROG WORKS LEAPFROG WORKS 2.0 Technical Release Notes This document outlines the features available in the version 2.0 release of Leapfrog Works. Contact your Leapfrog support team to arrange access
More informationLEAPFROG WORKS 2.2. Technical Release Notes
LEAPFROG WORKS 2.2 Technical Release Notes This document outlines the features available in the release of Leapfrog Works 2.2. System requirements, upgrade notes and information for Network Administrators
More informationThis document outlines the new features available in the release of Leapfrog Geo 4.3.
This document outlines the new features available in the release of Leapfrog Geo 4.3. System requirements and upgrade notes can be found at the end of this document. For Leapfrog Geo support visit my.leapfrog3d.com.
More informationLEAPFROG HYDRO 2.8. Technical Release Notes
LEAPFROG WORKS LEAPFROG HYDRO 2.8 Technical Release Notes This document outlines the major features and improvements in Leapfrog Hydro 2.8. More information about Leapfrog Hydro can be found online at
More informationLeapfrog Geothermal 3.5
Leapfrog Geothermal 3.5 Technical release notes This document outlines the major features and improvements in Leapfrog Geothermal 3.5. More information about Leapfrog Geo can be found online at www.leapfrog3d.com
More informationLEAPFROG GEO. Page 1
LEAPFROG GEO Page 1 Contents Page 2 Contents... 2 New features... 3 Data Analysis... 3 Vein Reprocessing Improvements... 6 Assign to the Base Lithology... 6 Identify Mesh Parts in the Scene... 7 Combine
More informationFlexible modelling from point data
Leapfrog Geo 3.1 Flexible modelling from point data Leapfrog Geo 3.1 introduces new workflows for modelling using point data. A 3D selection tool allows simple, fast in-scene categorisation of millions
More informationCentral 1.4. Release Notes
Central 1.4 Release Notes This document outlines the major features and improvements in Central 1.4, which includes changes in Central Server, Central Browser, Leapfrog Geothermal, Leapfrog Works, Leapfrog
More informationLEAPFROG GEOTHERMAL 3.4
LEAPFROG GEOTHERMAL LEAPFROG GEOTHERMAL 3.4 Technical Release Notes This document outlines the major features and improvements in Leapfrog Geothermal 3.4 Document Version 1 LEAPFROG GEOTHERMAL 3.4 New
More informationLeapfrog Central 1.2. Technical release notes
Leapfrog Central 1.2 Technical release notes This document outlines the major features and improvements in Leapfrog Central 1.2 which include some changes in Leapfrog Geo and Leapfrog Browser. More detailed
More informationQuestions & Answers. Contents AUTODESK ARCHITECTURAL DESKTOP 2006
AUTODESK ARCHITECTURAL DESKTOP 2006 With Autodesk Architectural Desktop you get flexibility in both implementation and use, the efficiency of real-world building objects, and the very best AutoCAD -based
More informationGeoSLAM Hub The complete software solution for GeoSLAM data
GeoSLAM Hub The complete software solution for GeoSLAM data GeoSLAM.com GeoSLAM Hub A comprehensive software suite that turns GeoSLAM data into actionable information and valuable deliverables. A part
More informationGeoSLAM Software. The complete end-to-end solution for GeoSLAM data. GeoSLAM.com
GeoSLAM Software The complete end-to-end solution for GeoSLAM data GeoSLAM.com GeoSLAM Software Solutions GeoSLAM Hub & Draw is a comprehensive software suite that transforms 3D point cloud data into actionable
More informationUser Manual for Leapfrog Geo version 2.2
User Manual for Leapfrog Geo version 2.2 Copyright All rights reserved. Unauthorized use, reproduction, or disclosure is prohibited. Patents pending. No patent liability is assumed with respect to the
More informationQuestions and Answers
AutoCAD Revit MEP Suite 2009 (Including Revit MEP 2009) Questions and Answers Purpose-built for building information modeling (BIM), Revit MEP software enables cost-effective and environmentally sustainable
More informationX-PAD Ultimate. The Ultimate solution in the field. Works when you do
Works when you do X-PAD Ultimate The Ultimate solution in the field X-PAD Ultimate is a tailored, flexible, modular, ideal, customised software for high end topographic tasks, such as measure, stake-out,
More informationAutodesk 360 in Design and Construction in the Cloud: A Pre-Flight Lab
Autodesk 360 in Design and Construction in the Cloud: A Pre-Flight Lab IKERD Consulting LLC: Jerry Campbell VDC Consultant - Speaker IKERD Consulting LLC: Will Ikerd PE, CWI, LEED AP, Principal, President
More informationAutodesk Revit Structure Autodesk
Autodesk Revit Structure 2011 What s New Top Features Autodesk Revit Structure 2011 Software Enhanced Design Features Fit and Finish Slanted columns Beam systems and trusses Concrete clean-up Concrete
More informationReadme: Autodesk Impression
Seite 1 von 6 Readme: Autodesk Impression Thank you for your interest in Autodesk Impression. Impression converts precision drawings to eye-catching design illustrations by applying appearance styles that
More informationQuestions and Answers
AUTODESK IMPRESSION 2 Questions and Answers Contents 1. General Product Information... 2 1.1 What is Autodesk Impression?... 2 1.2 Who uses Autodesk Impression?... 2 1.3 What are the primary benefits of
More informationTarget Lithology Voxels
Target Lithology Voxels The Target Lithology Voxels tool enables you to create a 3D grid (voxel) based on data contained in a string channel within a from-to drillhole database. A lithology voxel can be
More informationDisplay Layers in Geosoft 3D View
Use the New 2D/3D Workflow features in Target for ArcGIS In Target for ArcGIS version 3.5, there are three new interconnected features that make integrating 2D and 3D data in plan and section maps easier.
More informationQuestions and Answers
AUTODESK IMPRESSION 3 Questions and Answers Contents 1. General Product Information... 2 1.1 What is Autodesk Impression?... 2 1.2 Who uses Autodesk Impression?... 2 1.3 What are the primary benefits of
More informationProduct Leica Infinity. Date July 13 t, From Kevin Hanson
Product Leica Infinity Date July 13 t, 2018 From Kevin Hanson Leica Geosystems AG Heinrich-Wild-Strasse CH-9435 Heerbrugg Switzerland www.leica-geosystems.com Table of Contents 1 About Infinity v3.0.1...
More informationv. 9.0 GMS 9.0 Tutorial MODPATH The MODPATH Interface in GMS Prerequisite Tutorials None Time minutes
v. 9.0 GMS 9.0 Tutorial The Interface in GMS Objectives Setup a simulation in GMS and view the results. Learn about assigning porosity, creating starting locations, different ways to display pathlines,
More informationA set of annotation templates that maybe used to label objects using information input in the data model mentioned above.
AUTOCAD MAP 3D 2009 WHITE PAPER Industry Toolkits Introduction In today s world, passing of information between organizations is an integral part of many processes. With this comes complexity in a company
More information3D Model - Data Transfer Guide
Introduction 3D Model - The Leicester City model is a photogrammetric survey based 3D representation of 380ha of Leicester s Central Regeneration Area. The model is to be: Used for marketing and inward
More informationKnown Issues Autodesk Revit Building 9.1
AUTODESK REVIT BUILDING 9.1 & 9 Known Issues Autodesk Revit Building 9.1 Windows 2000 Operating System If you are installing Revit Building 9.1 on a computer running Windows 2000, you must first run the
More informationBrisBIM Gathering, August 2017
BrisBIM BrisBIM Gathering, August 2017 BIM IN TUNNELLING Implementation of BIM methodology to Trans Alpine tunnel Karavanke Marko Žibert Content Project summary 3D Modelling Model-based coordination 4D
More informationAutoCAD DWG Drawing Limitations in SAP 3D Visual Enterprise 9.0 FP03
AutoCAD DWG Drawing Limitations in SAP 3D Visual Enterprise 9.0 FP03 AutoCAD Import Limitations The following is a list of AutoCAD features that will not give an expected viewable when using SAP 3D Visual
More informationIntegrating CAD Data with ArcGIS
Integrating CAD Data with ArcGIS Agenda An Overview of CAD Drawings CAD Data Structure in ArcGIS Visualization Georeferencing Data Conversion ArcGIS for AutoCAD Q & A CAD Drawings - Overview Widely used
More informationRelease Notes SPECTRA PRECISION SURVEY OFFICE. Version
Release Notes SPECTRA PRECISION SURVEY OFFICE Version 3.90.1 Corporate office: Spectra Precision 10368 Westmoor Drive Westminster, CO 80021 USA www.spectraprecision.com Copyright and trademarks: 2005-2017,
More informationDigital Terrain Model V 6.5
TCP MDT Digital Terrain Model V 6.5 Professional Version Introduction The Professional Version is designed to assist users in all the phases of carrying out a Surveying or Civil Engineering project. Its
More informationDigitising a map in arcgis desktop 10.3
Digitising a map in arcgis desktop 10.3 1 CONTENTS 2 Evaluating your map... 2 3 Setting up the base map... 3 4 Georeferencing your map/maps... 3 4.1 Georeferencing tips.... 4 5 Digitising your maps...
More informationFARO As-Built for AutoCAD Software Versatile Reality to CAD Solutions
FARO As-Built for AutoCAD Software Versatile Reality to CAD Solutions FARO As-Built for Autodesk Revit Creating Efficiencies in Scan Data Extraction for BIM FARO As-Built for AutoCAD Software TM Versatile
More informationMaking AutoCAD better for architects.
Making AutoCAD better for architects. With Autodesk Architectural Desktop you get flexibility in both implementation and use, the efficiency of real-world building objects, and the very best AutoCAD based
More informationDecisionSpace Seismic Interpretation Software
DATA SHEET DecisionSpace Seismic Interpretation Software DecisionSpace Geosciences Key Features Advanced auto-tracking tools Dynamic domain conversion to interpret in time, depth, or both Automated mapping,
More informationLeveraging 2D Data in 3D Modeling
Leveraging D Data in 3D Modeling Leveraging D Data in 3D Modeling As more and more companies switch to 3D modeling the question of utilizing existing D data and referenced D data from collaborative sources
More informationM. Sc. Josip Bosnjak, B.Sc.C.E. Denis Simenic, B.Sc.C.E. Hrvoje Bosnjak, B.Sc.C.E.
M. Sc. Josip Bosnjak, B.Sc.C.E. Denis Simenic, B.Sc.C.E. Hrvoje Bosnjak, B.Sc.C.E. 1. General Description 2. Aim of the Project 3. Lecture in details 4. Conclusions 1. General Description the process of
More informationUnipass Secur Client User Guide v1.5
Unipass Securemail Client User Guide v1.5 This document provides a step by step illustrated user guide for the Unipass Securemail desktop software client / plug-in. UIdP Project Team May 2018 Contents
More informationQuestions and Answers
Revit Structure 2009 Questions and Answers Revit Structure software uses a single, intelligent model to coordinate all the tasks structural engineers and drafters need to complete during the building design
More informationAS10473 Design Workflow from Concept to Construction Documents Design Workflow from Concept to Construction Documents
Design Workflow from Concept to Construction Documents Laura Kay Smith Kasian Architecture Interior Design and Planning LTD. Learning Objectives Learn how to effectively create a process leading from design
More informationAutoCAD DWG Drawing Limitations in SAP 3D Visual Enterprise 9.0 FP02
AutoCAD DWG Drawing Limitations in SAP 3D Visual Enterprise 9.0 FP02 AutoCAD Import Limitations The following is a list of AutoCAD features that will not give an expected viewable when using SAP 3D Visual
More informationQuestions and Answers
Autodesk Revit Architecture 2010 Questions and Answers Autodesk Revit Architecture 2010 software works the way architects and designers think, allowing you to work naturally, design freely, and deliver
More informationIntroducing New TurboCAD Deluxe Version 18. RRP: incl. VAT. Please contact your reseller for multiple user licence pricing.
Introducing New TurboCAD Deluxe Version 18. New! Blocks; new Sync Block Attributes button added to the Block Palette. At any time you can select any block(s) and press the Sync button to reset attributes
More informationBriefing Session Guide. Sending Message Basics.
22 Briefing Session Guide Portal Briefing Session Administrators Guide: Part How one: To How do I series Sending Message Basics. Page - 2 - of 31 Administrator Basics Part 1 Sending Message Basics Contents
More informationFeatures available in this release of Encom Discover are: Simplified installation - Discover and Discover 3D are now bundled in the same installer
EncomTM DiscoverTM v12.0 Pitney Bowes Business Insight s latest release of Encom Discover showcases the ongoing innovative developments that have made Discover the must-have GIS application for geoscientists
More informationCloudTax. An introduction to the CloudTax application on CaseWare Cloud
CloudTax An introduction to the CloudTax application on CaseWare Cloud Table of Contents Table of Contents... 1 Managing your entire practice s tax related workflows with CloudTax... 2 What is CloudTax?...
More informationEffective Collaboration using Autodesk Revit Structure and Autodesk Building Systems
AUTODESK REVIT STRUCTURE AUTODESK BUILDING SYSTEMS Effective Collaboration using Autodesk Revit Structure and Autodesk Building Systems This white paper explains how structural engineers using Autodesk
More informationAdept 2018 PREP GUIDE
Adept 2018 PREP GUIDE WHY WE WROTE THIS GUIDE We developed the Adept 2018 Prep Guide to make you aware of some important changes to Adept 2018 suite of products that you need to consider when you upgrade
More informationDV20420 AutoCAD Civil 3D Visualization in 3ds Max, Infraworks or Navisworks
DV20420 AutoCAD Civil 3D Visualization in 3ds Max, Infraworks or Navisworks Paul c.kirkendall MasterGraphics, Inc. Learning Objectives After this class, attendees will be able to import Civil 3D project
More informationQUADRO ADVANCED VISUALIZATION. PREVAIL & PREVAIL ELITE SSDs PROFESSIONAL STORAGE -
PNY Professional Solutions QUADRO ADVANCED VISUALIZATION TESLA PARALLEL COMPUTING PREVAIL & PREVAIL ELITE SSDs PROFESSIONAL STORAGE NVS COMMERCIAL GRAPHICS Delivering the broadest range of Professional
More informationAutodesk Robot Structural Analysis Professional. Comprehensive analysis for your structural projects.
Autodesk Robot Structural Analysis Professional Comprehensive analysis for your structural projects. Integrated Structural Analysis Made Easier Autodesk Robot Structural Analysis Professional software
More informationWhat's New in NX 11 for Design Engineering
What's New in NX 11 for Design Engineering NX 11 for Design Productivity Convergent Modeling Many industries use scanned 3D data as part of their design processes. If you have worked with this data in
More informationTarget 3D Geology Surfaces
Target 3D Geology Surfaces The Target 3D Geology Surfaces (Contact Surface from Geology Grids) tool enables you to create subsurface topography grids, where the "Z" values correspond to the elevation of
More informationAutodesk Revit Architecture 2011
Autodesk Revit Architecture 2011 What s New Image courtesy of Cannon Design Top Features Autodesk Revit Architecture 2011 Software Large Team Workflow Ease of Use Analysis and Visualization ation And Performance
More informationOPEN. INTELLIGENT. Laser Scanning Software Solutions
OPEN. INTELLIGENT. Laser Scanning Software Solutions www.lfm-software.com The Future of Laser Scanning Safe and efficient operation of complex engineering assets, and the efficient management of their
More informationv Overview SMS Tutorials Prerequisites Requirements Time Objectives
v. 12.2 SMS 12.2 Tutorial Overview Objectives This tutorial describes the major components of the SMS interface and gives a brief introduction to the different SMS modules. Ideally, this tutorial should
More informationVideocard Benchmarks Over 800,000 Video Cards Benchmarked
Home Software Hardware Benchmarks Services Store Support Forums About Us Home» Video Card Benchmarks» High End Video Cards CPU Benchmarks Video Card Benchmarks Hard Drive Benchmarks RAM PC Systems Android
More informationQuestions and Answers
Revit Structure2009 Questions and Answers Revit Structure software uses a single, intelligent model to coordinate all the tasks structural engineers and drafters need to complete during the building design
More informationNew version of program STeelCON
November 2016 http://www.sofistik.gr/ Steel Structures New version of program STeelCON 2016.320 Dear colleagues, A new version of the STeel CONnections program for the design of bolted and welded steel
More informationGolden Software, Inc.
Golden Software, Inc. Only $299! The most sophisticated graphing package available, providing the professional quality you need with the flexibility you want. Create one of the more than 30 different graph
More informationOffice 365 Business The Microsoft Office you know, powered by the cloud.
Office 365 Business The Microsoft Office you know, powered by the cloud. Power your business with the best-in-class productivity tools from Microsoft the applications you know, always up-to-date and accessible
More informationStep 2: To begin creating subregions, be sure you still have the Site Floor Plan selected and then click on the Massing and Site tab (1). Under this t
Abstract: This step by step guide will help you understand how to create subregions in Revit. These subregions will allow you to represent hardscapes and turf areas in your site model. **These steps begin
More informationVIEWZ 1.3 USER MANUAL
VIEWZ 1.3 USER MANUAL 2007-08 Zeus Numerix ViewZ 1.3.0 User Manual Revision: 200806061429 The latest copy of this PDF may be downloaded from the website. An online (HTML) version is also available. Zeus
More informationDuctDesigner 3D SOFTWARE. Introduction. What you receive with release 2019 v1. Upgrade procedure. Introduction
RELEASE NOTES DuctDesigner 3D SOFTWARE This document provides basic information about new features and modifications in release 2019 v1 of the Trimble DuctDesigner 3D software. More detailed information
More informationCOMMAND STATION PC SOFTWARE
COMMAND STATION PC SOFTWARE MULTI-SITE MANAGEMENT SOFTWARE USER MANUAL Version 1.6 OpenEye Command Station Software Manual V 1.6 Manual Edition 34863AI - June 2018 2018, OPENEYE All Rights Reserved No
More informationPromap V2 User Guide
Promap V User Guide Need help? 0844 844 9960 customerservice@promap.co.uk www.promap.co.uk Contents 0 Introduction SECTION 0 Login & Search SECTION 04 Map Layers SECTION 3 05 Defining Sites and Printing
More informationVisualise and manage data
Encom Technology Pty Ltd ABN 28 002 841 349 Encom Discover 7.0 Geographical Information System for Geoscientists The integrated GIS for the Geosciences Encom Discover 7.0 is the desktop GIS designed especially
More information3D Terrain Modelling of the Amyntaio Ptolemais Basin
2nd International Workshop in Geoenvironment and 1 3D Terrain Modelling of the Amyntaio Ptolemais Basin G. Argyris, I. Kapageridis and A. Triantafyllou Department of Geotechnology and Environmental Engineering,
More informationBuilding and Analyzing Topology in Autodesk Map GI21-1
December 2-5, 2003 MGM Grand Hotel Las Vegas Building and Analyzing Topology in Autodesk Map GI21-1 Alex Penney ISD Training Content Manager, Autodesk Professional Services, Autodesk Inc. Topology is one
More informationBeyond the Limits: Using Autodesk Revit and Navisworks Manage for Design Collaboration on Large-Scale Projects
Beyond the Limits: Using Autodesk Revit and Navisworks Manage for Design Collaboration on Large-Scale Projects Joseph Huang MWH Global Luther Lampkin MWH Global SE4259 This class covers best practices
More informationStep 3 Step 4. Step 8. Step 9
This is an excerpt from Exercise 10, Scaled Output and the Layout Window, of the course manual provided for the McElhanney course MapInfo Professional and Encom Discover Mineral Exploration Module 1. Scaled
More informationv MODPATH GMS 10.3 Tutorial The MODPATH Interface in GMS Prerequisite Tutorials MODFLOW Conceptual Model Approach I
v. 10.3 GMS 10.3 Tutorial The Interface in GMS Objectives Setup a simulation in GMS and view the results. Learn about assigning porosity, creating starting locations, displaying pathlines in different
More informationv SMS 11.2 Tutorial Overview Prerequisites Requirements Time Objectives
v. 11.2 SMS 11.2 Tutorial Overview Objectives This tutorial describes the major components of the SMS interface and gives a brief introduction to the different SMS modules. Ideally, this tutorial should
More informationFAQs Contents 1. General Product Information Support and Training Platform and System Requirements... 6
FAQs Contents 1. General Product Information... 4 1.1 What is System Pvex TM?... 4 1.2 Who designed and developed System Pvex TM?... 4 1.3 What are the main features of System Pvex TM?... 4 1.4 Is it possible
More informationCADWorx DraftPro Questions and Answers
CADWorx DraftPro Questions and Answers Use CADWorx DraftPro software to improve the quality, efficiency, safety and cost effectiveness of those served by plant design. Today, Intergraph CADWorx & Analysis
More informationNHBC Extranet user guide. Site management made easy
NHBC Extranet user guide Site management made easy 1 Contents Welcome to the NHBC Extranet 3 Getting Started 3 I can t remember my login details 3 I don t have an account 3 Main Menu 4 Extranet Administration
More informationicon office release of version
Product: icon office Date: 17.12.2019 From: Torgny Israelsson icon office release of version 2019.1.11.20 We are pleased to announce the release of icon office 2019. icon office is now available as 64-bit
More informationAutodesk SIM 360 Pro FY14 Product Launch FAQ for Autodesk Customers
Autodesk SIM 360 Pro FY14 Product Launch FAQ for Autodesk Customers imaginit.com/sim360 The purpose of this FAQ document is to provide Autodesk customers and prospects information about the Autodesk SIM
More informationDfMA Technical Library. Help Documentation
DfMA Technical Library Help Documentation Page 1 of 43 Contents Contents... 2 Overview... 3 Users... 41 Tracking... 43 Process... 3 Roles within the system... 5 System Security... 6 Entering the System...
More informationCovers Autodesk Advance Steel fundamentals, so you become quickly productive with the software
Covers Autodesk Advance Steel fundamentals, so you become quickly productive with the software Autodesk Advance Steel 2017 www.autodesk.com new Autodesk Advance Steel users. It is recommended that you
More informationSmart Browser. The Fastest Way to Quickly & Easily Browse and Find Revit Families
The Fastest Way to Quickly & Easily Browse and Find Revit Families Working with Families The Smart Browser is an independent family content browser where families can be easily and quickly searched and
More informationAutodesk. Robot Structural Analysis Professional Welcome to the new millennium.
Autodesk Robot Structural Analysis Professional 2010 Welcome to the new millennium. Building Information Modeling for Structural Engineering Integrated tools for modeling, coordination, analysis, design
More informationWhat's New in Voxler 4?
What's New in Voxler 4? We have compiled a list of some of the top new features in Voxler 4. This list is only a small sampling of the new features added to Voxler 4. Drape GIS Data and Vector Maps over
More informationDRONE MAPPING FOR CONSTRUCTION
DRONE MAPPING FOR CONSTRUCTION POWERFUL SOLUTIONS FOR AS-BUILT SURVEYS AND SITE DOCUMENTATION - AUTOMATED FLEXIBLE PROCESSING - REPEATABLE RELIABLE ACCURACY - APPLICABLE RESULTS WE CAPTURE IMAGES FROM
More informationCarlson GIS for Surveyors
Professional Land Surveyors of Ohio 2016 Annual Conference -- Dayton Ohio Carlson GIS for Surveyors Presented by Who Is That CAD Girl? Jennifer DiBona is a long time CAD consultant and trainer doing business
More informationTCP MDT Digital Terrain Model - V7.5
TCP MDT Digital Terrain Model - V7.5 Standard Version Introduction The Standard Version is suitable for carrying out all kinds of topographical survey projects, terrain profiles, volume calculations etc.
More informationCARAT System Recommendations
CARAT System Recommendations 05/2018 With CARAT, you have chosen for a sophisticated graphic program, which provides kitchen planning at the highest technical level, with brilliant picture and colour quality.
More informationSheets and Revisions A Super Duper Click Saver Production
Sheets and Revisions A Super Duper Click Saver Production Jarod Schultz, Director of Autodesk Services 1 P a g e J a r o d S c h u l t z, i n i t i a l. a e c 2 P a g e J a r o d S c h u l t z, i n i t
More informationName: Date: June 27th, 2011 GIS Boot Camps For Educators Lecture_3
Name: Date: June 27th, 2011 GIS Boot Camps For Educators Lecture_3 Practical: Creating and Editing Shapefiles Using Straight, AutoComplete and Cut Polygon Tools Use ArcCatalog to copy data files from:
More informationMonash University Policy Management. User Guide
Monash University Policy Management User Guide 1 Table of Contents 1. GENERAL NAVIGATION... 4 1.1. Logging In to Compliance 360 - Single Sign On... 4 1.2. Help... 4 1.2.1. The University Policy Bank...
More informationWhat s new in SketchUp Pro?
What s new in SketchUp Pro? SketchUp Pro (Desktop) Making Information Modeling Useful Ultimately, we think BIM is about using information in your model to make better buildings. Our focus is to help users
More informationVideocard Benchmarks Over 800,000 Video Cards Benchmarked
Page 1 of 9 Hom e Software Hardware Benchm arks Services Store Support Forum s AboutUs Home» Video Card Benchmarks» High End Video Cards CPU Benchmarks Video Card Benchmarks Hard Drive Benchmarks RAM PC
More informationBIM + Design Technology HDR, Inc., all rights reserved.
BIM + Design Technology 2014 HDR, Inc., all rights reserved. HDR Profile HDR is a creative firm for architecture and engineering with experience spanning over 40 years in the Australian market. With more
More informationReality Capture: From Point Cloud To Design To Visualisation. by Shuaib Yunos, Baker Baynes
Reality Capture: From Point Cloud To Design To Visualisation by Shuaib Yunos, Baker Baynes Perspective: Design & Construction Designers are conceiving buildings differently. Building owners expect a lot
More informationTRIMBLE BUSINESS CENTER
TRIMBLE BUSINESS CENTER Release Notes Version 3.40 (64-bit) Geospatial Division, 10368 Westmoor Drive, Westminster, CO 80021, USA 2014, Trimble Navigation Limited. All rights reserved. Trimble, the Globe
More informationThe Department of Construction Management and Civil Engineering Technology CMCE-1110 Construction Drawings 1 Lecture Introduction to AutoCAD What is
The Department of Construction Management and Civil Engineering Technology CMCE-1110 Construction Drawings 1 Lecture Introduction to AutoCAD What is AutoCAD? The term CAD (Computer Aided Design /Drafting)
More informationAutodesk Revit Structure & AutoCAD Revit Series Structure
Autodesk Revit Structure software uses a single intelligent model to coordinate all the tasks structural engineers and drafters need to complete during the building design process from preliminary and
More informationSpring 2011 Workshop ESSENTIALS OF 3D MODELING IN RHINOCEROS February 10 th 2011 S.R. Crown Hall Lower Core Computer Lab
[1] Open Rhinoceros. PART 1 INTRODUCTION [4] Click and hold on the Boundary Lines in where they form a crossing and Drag from TOP RIGHT to BOTTOM LEFT to enable only the PERSPECTIVE VIEW. [2] When the
More information