8mm Square LED Built-in (Snap-in Type)
|
|
- Rodger Richardson
- 6 years ago
- Views:
Transcription
1 8mm Square LED Built-in ( ) SKHJ Series LED built-in type with a good reputation for wider varieties. Product Line Without LED Product SKHJAAA010 SKHJABA010 SKHJACA N 1.7N 2.N Travel Rating Rating mmmax. min. Vertical 0.2 0mA 12V DC 10BA 1V DC life ma V DC 1,000,000 00, ,000 Initial contact 100m max. Gray 1,000 1 Brown Minimum order unitpcs. Drawing Package With LED Product Travel Rating Rating life mmmax. min. ma V DC Initial contact LED Minimum order unitpcs. Drawing SKHJFAA010 SKHJFBA010 SKHJFCA010 SKHJFGA010 SKHJFHA010 SKHJFDA010 SKHJFEA010 SKHJFFA010 SKHJGRA010 SKHJGSA010 SKHJGEA010 SKHJGFA010 SKHJGGA N 1.7N 2.N 1,000, mA 10BA Vertical 12V DC 100m max. 1, V DC 00,000 Gray High brightness High brightness 200,000 Brown High brightness High brightness Mount Specifications of LEDSKHJ Color of illumination High brightness High brightness dissipation PmW Forward pulse peak current IFPmA Forward current IFDCmA Reverse voltage VRV Forward voltage VFV 2.0TYP 2.0 TYP 2.0TYP Reverse current IRBA VR=V max. 10 max. Peak emission wave length peaknm 700 TYP TYP 90 TYP 0 TYP TYP Spectral line half width nm 100 TYP 20 TYP 0 TYP 0 TYP 0 TYP Luminous intensity IVmcd 0.min. 1.0 TYP 0.8min. 2.0 TYP 0.min. 1.0 TYP 1.min..0 TYP 2.0min..0 TYP Refer to P.0 for soldering conditions. Refer to P.08 for standard knobs. 2
2 8mm Square LED Built-in ( ) SKHJ Series Unit:mm Photo Style PC board mounting hole dimensions Viewed from switch mounting face Without LED type ø1 holes Package With LED type 8. Mount ø1 holes Please use 1.mm thick PC boards. Circuit Diagram Without LED type With LED type 2
3 List of Varieties Series SKHR SKHL SKHW SKRD SKQJ SKHL SKQJ SKHJ SKQB Photo Snap in Features mm Vertical Horizontal W D H 1N..8.. Dust proof type Horizontal type Horizontal type With LED 8 8. Water proof 10 Package Operation coverage N Ground terminal temperature range Electrical performance Durability Environmental performance Insulation Voltage proof Vibration Lifetime Cold Dry heat Damp heat 20 to 70 SKHJ/HLVertical /QJ 0 to 8 100M min. 100V DC 20V AC for 1min. 10 to to 10Hz/min., the amplitude is 1.mm for all the frequencies, in the of X, Y and Z for 2hours respectively Shall be in accordance with individual specifications. 02 for 9h 802 for 9h 02, 90 to 9%RH for 9h Mount Page The automotive operating temperature range to be individually discussed upon request. WWidth. The most outer dimension excluding terminal portion. D Depth. The most outer dimension excluding terminal portion. H Height. The minimum dimension if there are variances. 27
4 Soldering Conditions Condition for Reflow Available for Mount. 1. Heating method: Double heating method with infrared heater. 2. Temperature measurement: Thermocouple 0.1 to 0.2 CAKor CCTat solder jointscopper foil surface. A heat resistive tape should be used to fix thermocouple.. Temperature profile Temperature ( C ) C max. sec max. 20 C Package 0s max. Time to min. Time inside soldering equipment 1. The above temperature shall be measured on the mounting surface of a PC board. There are cases where the PC board's temperature greatly differs from that of the switch, depending on the material, size, thickness of PC boards and others. The above-stated conditions shall also apply to switch surface temperatures. 2. Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended. Mount Conditions for Auto-dip Available for and Except SKHJ, SKHL, SKQJ, SKQK, SKEG series Items Flux built-up Preheating temperature Condition Mounting surface should not be exposed to fluk Ambient temperature of the soldered surface of PC board. 100 max. Manual SolderingExcept SKRT Series Items Condition Soldering temperature 0max. Duration of soldering s max. acity of soldering iron 0W max. Preheating time Soldering temperature Duration of immersion Number of soldering 0s max. 20 max. s max. 2times max. s 1. Consult with us for availability of washing. 2. Prevent flux penetration from the top side of the.. Switch terminals and a PC board should not be coated with flux prior to soldering.. The second soldering should be done after the switch is stable with normal temperature.. Use the flux with a specific gravity of min EC-19S-8 by TAMURA Corporation, or equivalents. 0
5 Product Line of Knobs Unit:mm Applicable model H Color Variety Model Label dimensions Unit:mm 2.8. SK2AA0010 SK2AA0020 SK2AA000 SK2AA000 SK2AA000 Package H10 H12 SK2AA0010 H10 SKHC SKQE 1. SK2AA00010 SK2AA00020 SK2AA0000 SK2AA SK2AA0000 SK2AA00070 SK2AA00080 SK2AA R1 SK2AA0020 H H. H8 H. Mount SKHJ SK2AA00210 SK2AA00220 SK2AA0020 SK2AA0020 SK2AA SK2AA0020 SK2AA00270 SK2AA00280 SK2AA00290 SK2AA0000 H H7. SK2AA000 H SKEG SK2AA0010 SK2AA0020 SK2AA000 SK2AA000 SK2AA000 + SK2AA000 SK2AA0070 SK2AA0080 SK2AA0090 SK2AA0000 -RO. s 1. The knob will be delivered together with the switch but packed separately. 2. The label is not included.. For SK2AA00010 to SK2AA00090 types, please check the mounting. SK2AA00010~00090() Stem of key switch 08
Features. Applications. 5mA 5V DC. 1,000,000cycles. 500,000cycles. 3 ycles. 500,000cycles 1V DC. 500,000cycles. 500,000cycles.
66mm ( type) SKHH Series User friendly 6G6mm type, available in a wide variety. Product Line Vertical Product SKHHAJA010 SKHHALA010 Travel Rating Rating life mmmax. min. ma V DC Features type allows the
More information12mm Square(Snap-in Type)
2mm Square( ) SKHC Series Joint stem & flat stem with stable operation feeling. Package Product Line Product No. force SKHCBJA00 0.74N direction Travel Rating Rating life mmmax.min. ma V DC 00,000 Initial
More informationHighly reliable IC-size type with gold contact supports automatic insertion. Typical Specifications
to 0 Circuits-designed Type Product Line Soldering Highly reliable IC-size type with gold contact supports automatic insertion Actuator configuration Packaging style Typical Specifications Poles 5 Minimum
More information4mm-travel, Self-return Type
Switch 4mm-travel, Self-return Type Series Two types: one has a cover and the other is an integrated design without a cover. Car Use RoHS applicable Features 4mm-travel. Reflow solderable type also available.
More informationmm TACT Switch (Radial)
6.06.0mm Switc () SKHV dovantage in excellent mounting efficiency. Ground terminal rersion is also available. Car Use Package Mount Features Supplied wit radial taping. llows automatic insertion onto PC
More information2 to 10 Circuits-designed
Dual In-line Switches to 0 Circuits-designed SSGM Series IC-size type highly reliable with gold contact supports automatic insertion. Typical Specifications Items Rating max. min. Resistive load Contact
More informationWater-proof structure with 3mm long travel. Typical Specifications
SPVQ structure with 3mm long travel Detector Slide Rotary Power Dual-in-line Package Product Line Poles 2 Notes Positions Changeover timing Non shorting Operating part shape Typical Specifications Terminal
More information1.9mm-thick Two-way Operation Type. Surface mount type, two-way detection with body thickness of 1.9mm. Typical Specifications
SPVT.9mm-thick Two-way Operation Product Line Poles Positions Surface mount type, two-way detection with body thickness of.9mm Terminal type Operating direction Typical Specifications Items Rating (max.)/(min.)
More informationA circuit variation of Normal Open and Normal Close. Typical Specifications
SPVS Compact Two-way Operation circuit variation of Normal Open and Normal Close Package Product Line Poles Positions Terminal type For PC board (Reflow) Lever length Standard Long Operating Typical Specifications
More information2.5mm-travel Large-sized Horizontal Type
Switch mm-travel Large-sized SPUN Series Large horizontal type suitable for multiple circuits. Typical Specifications Items Rating(max.)/(min.) (Resistive load) Contact resistance (Initial /After operating
More information11mm Size Metal Shaft Type Encoder Variety
mm Size Metal Shaft Encoder Variety EC Series Compact and highly reliable available in many varieties. Car Use Features Compact and highly reliable, sliding contact..mm-body height with a.mm-travel push
More information11mm Size Metal Shaft Type
ncoder mm Size Metal Shaft Series Compact and highly reliable type available in many varieties. Car Use RoHS applicable etector Features Compact and highly reliable, sliding contact type..mm-body height
More information12mm Size Insulated Shaft Type Encoder Variety
mm Size Insulated Shaft Encoder Variety ECE Series Insulated shaft type with a push-on switch and other features has a wide variety of applications. Package Features A mm sized unit achieved high resolution,
More informationSPEC NO: DSAO1259 REV NO: V.1A DATE: JAN/24/2015 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:
0.65X0.35mm SMD CHIP LED LAMP (0.2mm Height) Part Number: KPG-0603SEC-TT Super Bright Orange Features 0.65mmX0.35mm SMT LED,0.2mm thickness. Low power consumption. Wide viewing angle. Compatible with automatic
More information12mm Size Insulated Shaft Type Encoder Variety
mm Size Insulated Shaft Encoder Variety ECE Series Insulated shaft type with a push-on switch and other features has a wide variety of applications. Package Features A mm sized unit achieved high resolution,
More informationPRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 1 SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
More informationPRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 1 SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
More informationSPEC NO: DSAE5924 REV NO: V.9B DATE: DEC/03/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:
3.0mmx1.5mm SMD CHIP LED LAMP Part Number: APL3015SGC-F01 Super Bright Green Features 3.0mmx1.5mm SMT LED, 1.4mm thickness. Low power consumption. Ideal for backlight and indicator. Various colors and
More information100A inrush current compatible, compact and large capacity snap-in type with easy mounting. Ratings and Safety Standards C-UL-US
SDDJE 0A 0V AC Qualified Detector Power Dual-in-line Package Product Line Circuit arrangement SPST (mm) 00A inrush current compatible, compact and large capacity snap-in type with easy mounting Operating
More informationPRODUCT SPECIFICATION
1.0 SCOPE DDR4 DIMM SOCKET This Product Specification covers the 0.85mm centerline gold plated DDR4 DIMM edge card connector for 1.40 ± 0.10 thick memory modules..0 PRODUCT DESCRIPTION.1 PRODUCT NAME AND
More informationSMD FYLS 3528URC. Features: Description. Package Dimensions
FYLS 3528URC Features: Suitable for all SMT assembly and solder process. Available on tape and Reel Package : 2000pcs/ Reel Description. The Red source color devices are made with Gallium Arsenide Phosphide
More informationSPEC NO: DSAD1051 REV NO: V.14B DATE: APR/07/2015 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:
3.2x1.6mm SMD CHIP LED LAMP Part Number: APTD3216SGC Super Bright Green Features 3.2mmX1.6mm SMT LED, 1.8mm thickness. Low power consumption. Ideal for backlight and indicator. Package: 2000pcs / reel.
More informationSPEC NO: DSAF1085 REV NO: V.8A DATE: FEB/04/2015 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:
3.2x2.4mm SMD CHIP LED LAMP Part Number: APD3224SECK-F01 Super Bright Orange Features 3.2x2.4mm SMT LED, 2.4mm thickness. Low power consumption. Ideal for backlight and indicator. Package : 1500pcs / reel.
More information3.0mmx1.0 mm RIGHT ANGLE SMD CHIP LED LAMP. Features. Description. Package Dimensions. Part Number: APA3010SRCPRV-GX.
3.0mmx1.0 mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: APA3010SRCPRV-GX Super Bright Red Features 3.0mmx2.0mmx1.0mm right angle SMD LED, 1.0mm thickness. Low power consumption. Wide viewing angle. Ideal
More informationLighthouse LEDs. Customer Approval. Product Name High Bright Blue LED. Part Number. Customer. Customer PN. Version.
Technical Data Sheet Product Name 1206 High Bright Blue LED Part Number A-1206UBC Customer Customer PN Version Date Customer Approval Instituted By Checked By: Approved By 1. Features: Package ( L/W/H
More informationSPEC NO: DSAB1874 REV NO: V.20A DATE: AUG/26/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:
1.6X0.8mm SMD CHIP LED LAMP Part Number: KPT-1608SECK Super Bright Orange Features 1.6mmX0.8mm SMT LED, 0.75mm thickness. Low power consumption. Wide viewing angle. Ideal for backlight and indicator. Various
More informationSPEC NO: DSAB4968 REV NO: V.17A DATE: OCT/24/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:
3.2x1.6mm SMD CHIP LED LAMP Part Number: KP-3216SRC-PRV Super Bright Red Features 3.2mmx1.6mm SMT LED, 1.1mm thickness. Low power consumption. Wide viewing angle. Ideal for backlight and indicator. Various
More informationSMD FYLS 3528URC-AB. Features:
FYLS 3528URC-AB SMD Features: Suitable for all SMT assembly and solder process. Available on tape and Reel Package : 2000pcs/ Reel Description. The Red source color devices are made with Gallium Arsenide
More informationDescription. Kingbright
2.1x0.6mm RIGHT ANGLE SURFACE LED LAMP Part Number: Super Bright Orange Features Description 2.1x1.0x0.6mm right angle SMD LED, 0.6mm thickness. Low power consumption. Wide viewing angle. Ideal for backlight
More informationConnector for SD Memory Card
for SD Compact low-profile with highly reliable contact structure. SD SIM Typical Specifications Items NEW Specifications Structure Applicable media Mounting Mounting style SD / MultiMedia Surface ing
More informationSPEC NO: DSAO1263 REV NO: V.1B DATE: JAN/23/2014 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:
0.65X0.35mm SMD CHIP LED LAMP (0.2mm Height) PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: KPG-0603PBC-TT-5MAV Blue Features 0.65mmX0.35mm
More informationLighthouse LEDs. Technical Data Sheet. Customer Approval. Product Name. Part Number. Customer. Customer PN. Version.
Technical Data Sheet Product Name 0805 High Bright Purple Chip LED Part Number A-0805UUVC Customer Customer PN Version Date Customer Approval Instituted By Checked By: Approved By 1. Features: Package
More informationGTLIGHT Technical Data Sheet Part No. : HT SURC
Version A.2 Issued date 2012.01.01 Page 1 of 10 1. Features Package ( L/W/H ) : 3.2 1.6 0.8 mm Color : Ultra Bright Red Lens: Water Clear Flat Mold EIA STD Package Meet ROHS, Green Product Compatible With
More informationPart No: 1TC5003Y24H2CF01
COMMODITY: SURFACE MOUNT LED SMD SPECIFICATION Part No: 1TC53Y24H2CF1 Characters ITEM MATERIALS 5.mm 5.mm SMT LED, 1.5mm THICKNESS. Resin(Mold) Silicon LOW POWER CONSUMPTION. Lens Color Water Transparent
More informationTechnical Data Sheet
Technical Data Sheet Product Name:0603-0.55T High Bright Red LED Part Number: Customer: Customer PN: Version: A.2 Date: 2013.01.01 Customer Approval Instituted By: Checked By: Approved By: TEL: 0755-88999559
More informationDescription. Kingbright
10.2mm (0.4INCH) THREE DIGIT NUMERIC DISPLAY Part Number: BC04-11SEKWA Super Bright Orange Features 0.4 inch digit height. Low current operation. Excellent character appearance. Easy mounting on P.C. boards
More informationHarvatek International Infrared Through-Hole Lamp HE3-290AC-XXXX
Harvatek International Infrared Through-Hole Lamp Official Product Data Sheet No. Customer Part No. **************** August 5, 2009 Version of 1.0 Page 1/7 DISCLAIMER HARVATEK reserves the right to make
More informationSPEC NO: DSAO3608 REV NO: V.2B DATE: SEP/02/2015 PAGE: 1 OF 6 APPROVED:
1x1mm SMD CHIP LED LAMP (0.2mm Height) ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: KPGF-1011GBRC-120 Features 1.0mmX1.0mm SMD LED, 0.2mm thickness.
More informationLSM0603 Series 0603 SMD LED packages 1.6 x 0.8 x 0.55 mm LED Lamp
LSM0603 Series 0603 SMD LED packages 1.6 x 0.8 x 0.55 mm LED Lamp LSM0603453V Green SMD LED. High intensity light output, low power consumption, low profile and wide viewing angle. Application Wearable
More informationDATA SHEET LG-192DBK-CT/T LED SMD. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only QW0905-LG-192DBK-CT/T REV. : G. DATE : 16 - Apr
LED SMD Pb Lead-Free Parts LG-192DBK-CT/T DATA SHEET DOC. NO : QW0905-LG-192DBK-CT/T REV. : G DATE : 16 - Apr - 2007 Page 1/11 Features: 1. Package in 8.0mm carrier tape on 7" diameter reel. 2. Compatible
More information3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP. Descriptions. Features. Package Dimensions
3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APFA3010LSEEZGKQBKC Features 3.0x1.5x1.0mm right angle SMD LED,
More informationLIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LED SMD LG-110-9UG-CT/T DATA SHEET QW0905-LG-110-9UG-CT/T REV. : A. DATE : 12 - Mar
LED SMD Pb LG-110-9UG-CT/T DATA SHEET DOC. NO : QW0905-LG-110-9UG-CT/T REV. : A DATE : 12 - Mar - 2007 PART NO. LG-110-9UG-CT Page 1/10 Features: 1. Package in 8.0mm carrier tape on 7" diameter reel. 2.
More informationPart No: 1TC5003V24H2CF01
COMMODITY: SURFACE MOUNT LED SMD SPECIFICATION Part No: 1TC53V24H2CF1 Characters ITEM MATERIALS 5.mm 5.mm SMT LED, 1.5mm THICKNESS. Resin(Mold) Silicon LOW POWER CONSUMPTION. Lens Color Water Transparent
More informationPRODUCT SPECIFICATION
Dual SIM Card Connector, Retainer Type, 8-Pin, SMT, 3.0mm Profile Page 1 Dual SIM Card Connector, Retainer Type, 8-Pin, SMT, 3.0mm Profile Page 2 1.0 SCOPE. This specification covers performance, tests
More informationPRODUCT SPECIFICATION
1.25 mm pitch SMT Wire to Board Connector 1 of 7 A 1.0 SCOPE This specification covers performance, tests and quality requirements for 1.25 mm pitch Wire to Board DIP & SMT Type of 10114826~10114831 Series.
More informationDescription. Kingbright
8mm (0.32INCH) SINGLE DIGIT NUMERIC DIS- PLAY Part Number: SC32-11GWA Green Features 0.32 inch digit height. Low current operation. Excellent character appearance. High light output. Easy mounting on P.C.
More informationonlinecomponents.com
0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The use of a back lock mechanism enables a 3.15 mm (with lever) low profile design.
More informationEVERLIGHT ELECTRONICS CO., LTD.
ECN: Page: 1/8 Features:! Package in 8mm tape on 7 diameter reel.! Compatible with automatic placement equipment.! Compatible with infrared and vapor phase reflow solder process.! Mono-color type. Package
More informationSUBMINIATURE SOLID STATE LAMP. Features. Descriptions. Package Dimensions
SUBMINIATURE SOLID STATE LAMP Part Number: AM2520SRC03 Super Bright Red ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Subminiature package. Gull wing lead.
More informationIndex for Function. Notes
PC Index for Function Mounting system Standard Reverse Product No. Pin header Ejector W SC148 SCB178 SCB18 SC149 SCB179 SCB181 SC143 SCB178 SCB18 SC15 SC145 SC146 SC147 SCB179 SCB181 SCB178 SCB18 SCB179
More informationDATA SHEET L9UG9553/TR1. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT LED TAPE AND REEL DOC. NO : QW0905-L9UG9553/TR1 REV.
SURFACE MOUNT LED TAPE AND REEL Pb Lead-Free Parts L9UG9553/TR1 DATA SHEET DOC. NO : QW0905-L9UG9553/TR1 REV. : A DATE : 25 - Dec. - 2006 LIGITEK ELECTRONICS CO.,LTD. Page 1/7 Package Dimensions 3.5 3.2
More informationChip LEDs with Bi-Color(Multi-Color)
Features: Package in 8 mm tape on 7 diameter reel. Compatible with automatic equipment. Compatible with infrared and vapor phase reflow solder process. Multi-color type. Description: The 19-22 SMD Taping
More informationA highly reliable contact structure makes a thickness of only 2.75 mm possible. SD Memory Card / MultiMediaCard. Surface mounting type
SD Memory A highly reliable contact structure makes a thickness of only.75 mm possible. SD Memory minisd Features To defend from loss when memory card was ejected, halflock structure is adopted. Media
More informationLuckylight. 2mm Tower Type. Yellow LED. Technical Data Sheet. Part No.: 204YC2A-2Y
2mm Tower Type Yellow LED Technical Data Sheet Part No.: 24YC2A-2Y Spec No.: B1 X565 Rev No.: V.3 Date: Oct./12/26 Page: 1 OF 7 Features: 2mm Tower. High efficiency. Selected minimum intensities. Available
More informationFPC connectors (0.2mm pitch) Back lock
0.9 AYF21 For FPC FPC connectors (0.2mm pitch) Back lock Y2B Series New FEATURES 1. Slim and low profile design (Pitch: 0.2 mm) 0.2 mm pitch back lock design and the slim body with a 3.15 mm depth (with
More informationRTE02 and RTE03 Miniature Rotary Switches
RTE02 and RTE03 Miniature Rotary Switches RTE02 and RTE03 are two types of a subminiature rotary changeover switch to be mounted on PC boards. PC pins are in a 2.54 mm (0.100) grid. RTE02 with 2 positions
More information1 Form A 8A/16A, Small Polarized Power Relays (latching type)
8A/16A, Small Polarized Power Relays (latching type) DW RELAYS (ADW1) New Low profile type (Inrush type) FEATURES 1. Low profile type available (h = 15.8 mm.622 inch) 2. Inrush type available (TV-8 UL/C-UL
More information3.5x2.8mm SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions. Part Number: AA3528SES/J4. Super Bright Orange
3.5x2.8mm SURFACE MOUNT LED LAMP Part Number: AA3528SES/J4 Super Bright Orange Features Single color. Suitable for all SMT assembly and solder process. Available on tape and reel. Ideal for backlighting.
More informationLAMP /F2C4-FHNO/R23
1224-15/F2C4-FHNO/R23 Features High luminous power Typical chromaticity coordinates x=0.258, y=0.228 according to CIE1931 Bulk, available taped on Ammo. ESD-withstand voltage: up to 4KV The product itself
More informationLSM0603 Series 0603 SMD LED packages 1.6 x 0.8 x 0.60 mm LED Lamp
LSM0603 Series 0603 SMD LED packages 1.6 x 0.8 x 0.60 mm LED Lamp LSM0603443V White SMD LED. High intensity light output, low power consumption, low profile and wide viewing angle. Application Wearable
More informationDescriptions. Kingbright
1.6X1.25mm BI-COLOR SMD CHIP LED LAMP Part Number: KPTB-1612ESGC Features 1.6mmx1.25mm SMD LED, 0.65mm thickness. Bi-color,low power consumption. Wide viewing angle. Ideal for backlight and indicator.
More informationMeet requirements of USB 2.0
NEW Meet requirements of USB.0 UX Series Features 1. Certified to perform as required in USB.0 Standard Tested and certified by USB Association approved laboratory the connectors will perform at transmission
More information5mm Round With Flange Type Infrared LED Technical Data Sheet. Part No.: LL-503IRT2E-2AC
5mm Round With Flange Type Infrared LED Technical Data Sheet Part No.: LL-503IRT2E-2AC Spec No: B508 X335 Rev No: V.2 Date: Nov/26/2005 Page: 1 OF 8 Features: Standard T-1 3/4 diameter package. Low forward
More informationRACON short-travel keyswitches
General data short-travel keyswitches with sealed contact system and distinct key click, excellent switching reliability. For use under an overlay or with RK 90 keycaps. Print and SMD versions available
More informationOpto Plus LED Corp x 8 Dot Matrix LED Display OPD-M58810LB-GW OPD-M58811LB-GW
EDIT HISTORY Version A : Nov. 21, 2013 Preliminary Spec. Version B: Sep. 16, 2015 Add package dimensions. Manufacture Examination Approving 1 FEATURES 2.30 inch (58.34 mm) Matrix Height. Stackable vertically
More informationMEI. Features: Descriptions: Applications:
Features: Low Power consumption. High efficiency and low cost. Good control and free combinations on the colors of LED lamps. Good lock and easy to assembly. Stackable and easy to assembly. Stackable vertically
More information9mm Size Metal Shaft Snap-in Type
Potentiometer 9mm Size Snap-in Type RK09L Series Single-unit and dual-unit types suit a variety of controls. Typical Specifications Items Total tolerance Maximum operating voltage Total rotational angle
More informationPRODUCT SPECIFICATION
DC Power Jack, Thru-Hole, Horizontal, w/locating Pegs, Ø2.00mm Page 1 DC Power Jack, Thru-Hole, Horizontal, w/locating Pegs, Ø2.00mm Page 2 1.0 SCOPE. DC Power Jack, Thru-Hole, Horizontal, w/locating Pegs,
More informationLuckylight. 5mm Round With Flange Type. White LED. Technical Data Sheet. Part No.: 584WC2C-W5-1PC-P
5mm Round With Flange Type White LED Technical Data Sheet Part No.: 584WC2C-W5-1PC-P Spec No.: B52A X265 Rev No.: V.3 Date: Aug./5/27 Page: 1 OF 9 Features: Popular T-1 3/4 diameter package. Bulk,Available
More informationOpto Plus LED Corp x 8 Dot Matrix LED Display OPD-M48810UPG-GW OPD-M48811UPG-GW
EDIT HISTORY Version A: Sep.16, 2015 Preliminary Spec. Manufacture Examination Approving 1 FEATURES 1.46 inch (31.00 mm) Matrix Height. Stackable vertically and horizontally. 8x8 array with X-Y select.
More information2.6 GHz capable, 10 W carrying power (at 2.6 GHz), 50Ω/75Ω impedance and 1 Form C relays
.6 GHz capable, W carrying power (at.6 GHz), 5Ω/75Ω impedance and Form C relays RE RELAYS (ARE)..44..44 mm inch FEATURES Excellent high frequency characteristics (to.6ghz) Surface-mount type also available
More informationPart No:1TC5003W52E2WFC9
COMMODITY: SURFACE MOUNT LED SMD SPECIFICATION Part No:1TC53W52E2WFC9 Characters ITEM MATERIALS 5.mm 5.mm SMT LED, 1.5mm THICKNESS. Resin(Mold) Silicon LOW POWER CONSUMPTION. Lens Color Yellow VIEWING
More informationMini PCI Express Card Socket
Mini PCI Express Card Socket Document No: Page: 1 of 4 1. Scope This specification covers the material and performance requirements for the Mini PCI Express Card Socket series. 2. Applicable documents
More information5.0X6.0mm SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions
5.0X6.0mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AA5060ZGS/E Green Features Single color. Suitable for all SMT assembly
More informationPRODUCT SPECIFICATION. MES3050 Rev A Date 11/06/09 T-Flash Memory Card, Push-Push + SIM Card (6-Pin), Push-Pull (2-in-1 Combo Connector).
Page 1 Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the 2-in-1 Combo Connector MES3050 (T-Flash Push-Push + SIM 6-Pin Push-Pull). 2.0 PRODUCT NAME AND PART
More informationJJ Series Detector Switches
Applications JJ Series Detector Switches Automotive Instrumentation White goods Telecommunications Benefits RoHS Compliant Halogen and Lead Free Sharp detection feeling Compact Size TE Connectivity is
More informationSquare With 5Ф Dome 4 Lead Super Yellow LED Technical Data Sheet. Part No.: LL-U48UY3C-Y2-4D
Square With 5Ф Dome 4 Lead Super Yellow LED Technical Data Sheet Part No.: LL-U48UY3C-Y2-4D Spec No.: BNH116 X85 Rev No.: V.3 Date: Jan./25/26 Page: 1 OF 7 Features: Fewer LEDs required. Low profile. Lowers
More informationTechnical Data Sheet 5mm POWER LED
Features. High Flux Output.. Designed for High Current Operation.. Low Thermal Resistance.. Low Profile.. Packaged in Tubes for Use with Automatic Insertion Equipment.. The product itself will remain within
More informationLTH3MM12V Series 3mm (T-1) Through Hole LED Built in Resistor for 12VDC
TM LTH3MM12V Series 3mm (T-1) Through Hole Built in Resistor for 12VDC LTH3MM12VFR44 - White Water-Clear T-1 (3 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 3 / 35 12 Volt Applications Automotive Indoor
More informationLuckylight. 2mm Tower Type. White LED. Technical Data Sheet. Part No.: 204WM2A-W2-3N
2mm Tower Type White LED Technical Data Sheet Part No.: 24WM2A-W2-3N Spec No.: B1 X565 Rev No.: V.3 Date: Jun./2/28 Page: 1 OF 9 Features: 2mm Tower. Wide viewing angle=4. Available on tape and reel Emission
More informationLITE-ON TECHNOLOGY CORPORATION
Features * Meet ROHS, Green Product. * Extra thin (0.35H mm) Chip LED. * Extra bright AlInGaP Chip LED. * Package in 8mm tape on 7" diameter reels. * EIA STD package. * I.C. compatible. * Compatible with
More informationLITE-ON TECHNOLOGY CORPORATION
Features * Meet ROHS, Green Product. * Extra thin (0.35H mm) Chip LED. * Package in 8mm tape on 7" diameter reels. * EIA STD package. * I.C. compatible. * Compatible with automatic placement equipment.
More information5mm Round Standard T-1 3/4 With Flange Type White LED Technical Data Sheet. Part No.: LL-504WC2E-W2-3TC
5mm Round Standard T-1 3/4 With Flange Type White LED Technical Data Sheet Part No.: LL-54WC2E-W2-3TC Spec No.:B58 X335 Rev No.: V.2 Date: Jun/16/26 Page: 1 OF 8 Features: Popular T-1 3/4 diameter package.
More information3.5x2.8mm SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions
3.5x2.8mm SURFACE MOUNT LED LAMP Part Number: AA3528SRS Super Bright Red Features Single color. Suitable for all SMT assembly and solder process. Available on tape and reel. Ideal for backlighting. Package
More informationTechnical Data Sheet 3mm POWER LED
Benefits. High Flux Output.. Low Profile.. Low Thermal Resistance.. Low Power Consumption..The product itself will remain within RoHS compliant version.. ESD-withstand voltage: up to 4KV. Descriptions
More informationTechnical Data Sheet 0603 Package Chip LED (0.8 mm Height)
Technical Data Sheet 0603 Package Chip LED (0.8 mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
More information1206 SMD LED VAOL-S12SURC C
Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself
More informationP-LED EALP03SXABA0. Lead (Pb) Free Product - RoHS Compliant
Lead (Pb) Free Product - RoHS Compliant Feature Low profile. Uniform color. High flux output. Colorless clear resin. Brightness: 1125 to 2850 mlm at 30mA. Packaged in tubes for use with automatic insertion
More informationTechnical Data Sheet Oval POWER LED
Features. High Flux Output.. Designed for High Current Operation.. Low Thermal Resistance Rth(junction to lead):120 C/W. Packaged in Tubes for Use with Automatic Insertion Equipment..The product itself
More informationLAMP UTC/S400-X9-L
Features Popular T-1 round package High luminous power Typical chromaticity coordinates x=0.29, y=0.28 according to CIE1931 Bulk, available taped on reel. The product itself will remain within RoHS compliant
More information5.0mm x 6.0mm SURFACE MOUNT LED LAMP. Description. Features. Package Dimensions
5.0mm x 6.0mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AAAF5060QBFSURZGS Features Chips can be controlled separately. Suitable
More informationDescription. Kingbright
T-1 (3mm) SOLID STATE LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: L-7104GD-12V Green Features Description Low power consumption. Popular T-1 diameter
More informationSFI Electronics Technology. Super High Network (SHN) Series. Approval Sheet. Customer Information. Part No. : Model No. : Company Purchase R&D
Approval Sheet Customer Information Customer : Part Name : Part No. : Model No. : Company Purchase R&D Vendor Information Name: Part Name Part No. INC. Chip Surge Protection Device (CSPD) Series Lot No.
More informationMLVS 0402 Series Engineering Specification
MLVS 0402 Series 1. Scope This specification is applicable to Chip Metal Oxide Varistor in multilayer technology.the customer designed part number drawing take precedence over this specification. For RoHS
More information0603 SMD LED VAOL-S6SDRC C
Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself
More informationSPEC NO: DSAE9407 REV NO: V.6B DATE: JAN/19/2015 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED:
T-1 3/4 (5mm) ROUND LED LAMP Part Number: WP7143SGC Super Bright Green Features Outstanding material efficiency. Reliable and rugged. Low current capability. RoHS compliant. Description The Super Bright
More informationAtom FBM GENERAL S SERIES. Specification CHIP FERRITE BEAD MULTILAYER TYPE. Part No. InduSTance 1. Percent RDC 2 IDC Tolerance Max Max
CHIP FERRITE BEAD MULTILAYER TYPE FBM GENERAL S SERIES Specification Part No. InduSTance 1 Percent RDC 2 IDC Tolerance Max Max (MA) FBM 0402 ST 060 S 6 @ 100 MHZ S 0.05 500 FBM 0402 ST 100 S 10 @ 100 MHZ
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Chip LED with Right Angle Lens Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment.- Compatible with infrared and vapor phase reflow solder
More informationLAMP /F1C5-1RTA
Features Popular T-1 3/4 round package High luminous power Typical chromaticity coordinates x=0.29, y=0.28 according to CIE1931 Bulk, available taped on reel. ESD-withstand voltage: up to 4KV The product
More information3mm Advanced Super Flux LEDs T4C-4PRB
3mm Advanced Super Flux LEDs Lead (Pb) Free Product - RoHS Compliant Feature RoHS compliant. Piranha package. Colorless clear resin. Low thermal resistance Packaged in tubes for Automatic Insertion Equipment.
More information