Water-proof structure with 3mm long travel. Typical Specifications

Transcription

1 SPVQ structure with 3mm long travel Detector Slide Rotary Power Dual-in-line Package Product Line Poles 2 Notes Positions Changeover timing Non shorting Operating part shape Typical Specifications Terminal type For PC board With wire Items Rating (max.)/(min.) Contact resistance (Initial / After operating life) Operating force Operating life Main body form Normal Normal Normal With a screw hole With a screw hole. Products with a wire will be supplied as follows. The length of lead wire is 20mm. For length modification, please contact us. Product with wire will be build-to-order. 2. This unit cannot be used in water (IP rating, except for terminal). Without load With load Minimum order unit (pcs) Japan Export 00 2, Specifications 0.A 2V DC / 0μA 3V DC 00mΩmax. / Ωmax. type 2N max. Product SPVQ4000 SPVQ40200 SPVQ40300 SPVQ40400 SPVQ30200 SPVQ30400 SPVQ3000 SPVQ3000 SPVQ30300 SPVQ3000 SPVQ3000 SPVQ3000 Actuator type.n max. (0.A 2V DC) SPVQ2000 SPVQ2000 SPVQ2000 SPVQ2000 SPVQ200 Drawing SPVQ00 4 Packing Specifications Tray Product Number of packages (pcs.) case /Japan case /export packing Export package measurements (mm) SPVQ30200, SPVQ30300, SPVQ30400, SPVQ3000, SPVQ3000, SPVQ3000, SPVQ3000, SPVQ3000, SPVQ4000, SPVQ40200, SPVQ40300, SPVQ , Bulk Product Number of packages (pcs.) case /Japan case /export packing Export package measurements (mm) SPVQ200, SPVQ00, SPVQ SPVQ2000, SPVQ2000, SPVQ Refer to P.3 for soldering conditions.

2 SPVQ/ Style () Actuator configuration Unit:mm Detector Slide Rotary Power Dual-in-line Package. ø C0.3 (.). Terminal Terminal 2. ø (.). 4

3 SPVQ Detector Slide Rotary Power Dual-in-line Package 4 (.) ø Style 2-3 Unit:mm C0.3 Actuator configuration () () () 4

4 SPVQ/. 3. C0.3 C Style.. (.). 3.. Unit:mm Actuator configuration..4. Detector Slide Rotary Power C0.3 C Dual-in-line Package (.) (.)...4. C0.3 C0.3 Circuit Diagram 2 3 4

5 Detector Switches List of Varieties Detector Slide Rotary Power Dual-in-line Package Series Photo Operation type (mm) SPVQ SPVQ3 SPVQ4H SPVQ SPVQ One-way One-way W D..3.4 H.3.. Operating range 40 to + Automotive use Life cycle (availability) Poles / Positions /2 Rating (max.) Rating (min.) 0.A 2V DC 0μA 3V DC 0.A 2V DC or 0.3A V DC 0μA V DC or ma V DC / /2 ma V DC /2 0.A 2V DC 0μA V DC / /2 Durability Operating life without load Operating life with load R a t i n g(m a x.) Initial contact resistance or,200,000cycles or,200,000cycles 00mΩ max. Electrical performance Insulation resistance Voltage proof 00MΩ min. 00V DC 00V AC for minute Mechanical performance Terminal strength Actuator strength 3N for minute (with terminal) Wire strength 30N for minute (with wire) Wire strengh 30N for minute 20N 3N for minute Cold 40 00h Environmental performance Dry heat 00h Damp heat 0, 0 to % RH 00h Operation force 2N max..n max. ±0.N 3N max. 3N max. ±0.N 3N max. ±0.N Page 4 0 Detector Switches Soldering Conditions 3 Detector Switches Cautions 4 Note Indicates applicability to all products in the series. 4

6 Detector Switches Soldering Conditions Example of Reflow Soldering Condition. Heating method: Double heating method with infrared heater. 2. Temperature measurement: Thermocouple φ0. to 0.2 CA (K)or CC (T)at soldering portion (copper foil surface). A heat resisting tape should be used for fixed measurement. 3. Temperature profile Temperature ( C ) Room Pre-heating F max. C A max. B D E Time (s) Detector Slide Rotary Power Series (Reflow type) A( )3s max. B( ) C(s) D( ) E( ) F(s) SPPB SPPW 3 Dual-in-line Package SPVE SPVL SPVM SPVN SPVR SPVS SPVT SSCM SSCQ SPVQC, SPVQE 20 Notes. The condition mentioned above is the on the mounting surface of a PC board. There are cases where the PC board's greatly differs from that of the switch, surface depending on the PC board's material, size, thickness, etc. The above-stated conditions shall also apply to switch surface s. 2. Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended. Reference for Hand Soldering SPVS, SPVN, SPVT, SPVM, SPVR, SPVE, SPPW,SSCQ, SSCM, SPVL, SSCT, SPVQC, SPVQE SPVQ, SPVQ3, SPVQ, SPVQ, SPVQ, SPVQ, SSCN, SPVQA SPPB (Reflow) Series SSCF, SPPB (For Lead, Dip) Soldering 30± 300±0 300± 30±0 Soldering time 3s max. 3 + / 0s s max. 3 + / 0s Reference for Dip Soldering (For PC board terminal types) SSCT, SPVQ, SPVQ3, SPVQ, SPVQ, SPVQ, 00±0 0s max. 20± ±s SPVQ, SPVQA SPPW, SPPB SSCF Series Preheating 00 max. Items Preheating time Dip soldering Soldering 0s max. 2± Duration of immersion ±s ー 20± ±s 3