1.9mm-thick Two-way Operation Type. Surface mount type, two-way detection with body thickness of 1.9mm. Typical Specifications

Transcription

1 SPVT.9mm-thick Two-way Operation Product Line Poles Positions Surface mount type, two-way detection with body thickness of.9mm Terminal type Operating direction Typical Specifications Items Rating (max.)/(min.) Contact resistance (Initial / fter operating life) Location lug Operating force Side terminal load With load Minimumorder unit(pcs) Japan Export Specifications 0m 0V DC / 00μ V DC 00mΩ max. / Ω max. 0.4N max. 00,000cycles 00,000cycles (0m 0V DC) Product No. SPVT00 Drawing No. Right With SPVT00 SPVT00 SPVT400 4 Package SPVT00 SPVT00 For PC board (Reflow),00 0,000 SPVT00 SPVT00 Left With SPVT00 SPVT00 SPVT400 8 SPVT00 SPVT00 SPVT00 Packing Specifications Taping Number of packages (pcs.) reel case /Japan case /export packing Tape width Export package measurements Reel size,00,000 0, Circuit Diagram Refer to P. for soldering conditions.

2 SPVT.9mm-thick Two-way Operation Package No. (0.) -0. (0.) (.) (.).4 Style, ø,.9. PC board mounting hole and land dimensions (Viewed from direction ).0 0. ø. (0.) (.),.0.9. ø Center of rotation (0.) (.),.9..0 ø.

3 SPVT/.9mm-thick Two-way Operation No.,.0 Style.4 (0.) -0. (.)..9. ø PC board mounting hole and land dimensions (Viewed from direction ), (0.) 0. (.).9. Package.0 ø,.0. (0.) 0. (.).9. ø., (0.).9. 8 (.).0. ø Note drawing is for type with location lugs.

4 Detector Switches List of Varieties Photo General-purpose SPVS SPVN SPVT SPVM SPVR SPVE Operation type Two-way One-way W.8..4 D.. 4. H.9. Operating range 40 to +8 0 to +0 utomotive use Life cycle (availability) Poles / Positions / Rating (max.) Rating (min.) m V DC 0m 0V DC m V DC 0. 0V DC 0μ V DC 00μ V DC 0μ V DC 00μ V DC 0μ V DC Package Durability without load with load R a t i n g(m a x.) Initial contact resistance 00,000cycles Ω max. 00,000cycles Ω max. 0,000cycles Ω max. 0,000cycles Ω max. Ω max. 00mΩ max. Ω max. Ω max. 00mΩ max. Electrical Insulation resistance Voltage proof 00MΩ min. 00V DC 00V C for minute Mechanical Terminal strength ctuator strength N for minute N for minute N for minute N 0N N N N Cold 40 9h 0 9h Environmental Dry heat Damp heat 8 9h 40, 90 to 9%RH 9h Operation force 0.N max. 0.4N max. 0.N max. 0.N max. Page 9 4 Detector Switches Soldering Conditions Detector Switches Cautions 4 Note Indicates applicability to all products in the series.

5 Detector Switches Soldering Conditions Example of Reflow Soldering Condition. Heating method: Double heating method with infrared heater.. Temperature measurement: Thermocouple φ0. to 0. C (K)or CC (T)at soldering portion (copper foil surface). heat resisting tape should be used for fixed measurement.. Temperature profile Temperature ( C ) Room Pre-heating F max. C max. B D E Time (s) (Reflow type) ( )s max. B( ) C(s) D( ) E( ) F(s) SPPB 40 0 SPPW8 Package SPVE SPVL SPVM SPVN SPVR SPVS SPVT SSCM SSCQ SPVQC, SPVQE 0 Notes. The condition mentioned above is the on the mounting surface of a PC board. There are cases where the PC board's greatly differs from that of the switch, surface depending on the PC board's material, size, thickness, etc. The above-stated conditions shall also apply to switch surface s.. Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended. Reference for Hand Soldering SPVS, SPVN, SPVT, SPVM, SPVR, SPVE, SPPW8,SSCQ, SSCM, SPVL, SSCT, SPVQC, SPVQE SPVQ, SPVQ, SPVQ, SPVQ, SPVQ8, SPVQ9, SSCN, SPVQ SPPB (Reflow) SSCF, SPPB (For Lead, Dip) Soldering 0± 00±0 00± 0±0 Soldering time s max. + / 0s s max. + / 0s Reference for Dip Soldering (For PC board terminal types) SSCT, SPVQ, SPVQ, SPVQ, SPVQ, SPVQ8, 00±0 0s max. 0± ±s SPVQ9, SPVQ SPPW8, SPPB SSCF Preheating 00 max. Items Preheating time Dip soldering Soldering 0s max. ± Duration of immersion ±s ー 0± ±s