2.5mm-travel Large-sized Horizontal Type
|
|
|
- Dorcas Alexander
- 5 years ago
- Views:
Transcription
1 Switch mm-travel Large-sized SPUN Series Large horizontal type suitable for multiple circuits. Typical Specifications Items Rating(max.)/(min.) (Resistive load) Contact resistance (Initial /After operating life) -poles forces -poles Specifications Standard Medium-current 0.A 0V DC/ 0BA V DC A V DC 0mΩ max./0mω max. ±N ±N ±.N ±N life Without load With load (0.A 0V DC),000 (A V DC) Product Line Changeover timing Non shorting Travel Rating Standard Mediumcurrent Mounting method PC board Poles Operation Latching Momentary Latching Terminal type Minimum order unit(pcs.),0,0 Product No. SPUN90 SPUN9600 SPUN90900 SPUN900 SPUN9 SPUN9900 SPUN9600 SPUN9800 SPUN9C00 Packing Specifications Bulk Number of packages(pcs.) Product No. case /Japan case/export packing Export package measurements SPUN90900 SPUN900 SPUN90 SPUN9600 SPUN9600 SPUN9800 0, SPUN9 SPUN9900 SPUN9C00 Notes. other than those listed in the above chart are also available. Please contact us for details.. Please place purchase orders per minimum order unit N (integer).. Please contact us for automotive use. Refer to P.6 for knobs. 9
2 Switch mm-travel Large-sized SPUN Series Dimensions Unit:mm Style PC board mounting hole dimensions (Viewed from the direction A) Travel 6. terminal terminal A Terminal No. 8. holes 6 -pole -pole G. hole 6 0 -pole -pole. 0 Thickness of PC board t=.6mm 8. -poles:6 6.. PC board mounting face Actuator Configuration at Front Edge Unit:mm Circuit Diagram (Viewed from Direction A) -poles -poles () H. H (0.) 6 8 9!0!! 6
3 Switches List of Varieties Series SPEE SPPJ SPPJ SPUJ SPUP SPUN SPUN medium current SPEG SPEJ Photo Travel Number of poles Dimensions Rating(max.)(Resistive load) Rating(min.)(Resistive load) W D H temperature range Soldering Manual Dip Reflow. C to + 60 C C to +8 C C to +60 C 8 0 C to + 8 C Automotive use Electrical performance Mechanical performance Durability Environmental performance Initial contact resistance Insulation resistance Voltage proof Terminal strength Actuator strength direction Pulling direction life without load life without load Load:as rating Cold Dry heat Damp heat 0mA V DC 0BA V DC MΩ min. 0V DC 0V AC for minute 0,000 0,000 0± for 96h 0.A 0V DC 0.A 0V DC 0mA 6V DC 0.A V DC A V DC 0BA V DC 0BA V DC 0mΩ max. 0MΩ min. 00V DC 00V AC for minute N for minute 0N 0N 0N 9N 0mΩ max. 0mΩ max. 0± 0± 0± 0± 00± 0± + 0 s + 0 s + 0 s + 0 s s max. s max. 60± 60± 60± 60± ±s ±s ±s ±s Please see P. Please see P. 0N 0± for 96h 8± for 96h 0±, 90 to 9%RH for 96h 0mΩ max. 0mΩ max.,000 0mΩ max. 00mΩ max. MΩ min. 0V DC 0V AC for minute 0.N for minute 0mΩ max. 0MΩ min. 00V DC 00V AC for minute,000 0.A V DC 0± for 00h 8± for 00h 60±, 90 to9% RH for00h Page mΩ max. Switches Attached Parts 6 Soldering Conditions Notes Switches Caution 8. F. The operating temperature range for automotive applications can be raised upon request. Please contact us for details.. F. V or less, at the present rating of ma V DC for output voltage.. marks in "Available for automotive use" indicate that all of the series products can work at the operating temperature range from -0 to +8. 0
4 Switches Attached Parts Please specify required knob. Knob outline drawing Color Variety Model Unit:mm Series.6 9 UJ060 UJ0600 UJ0606 SPPJ SPUJ Key pitch mm R Key pitch mm.9. R R0.. UE0 UE0 UE0 Key pitch mm..9 R0.. R0.. Black Red White UE00 UE00 UE00 SPPJ SPUP Key pitch.mm. R0..8. R0. UE00 UE00 UE00 SPUN SPEC Key pitch 0mm R0..8. R0. UE00 UE00 UE00 ø Round knob 0. ø. R0 R0.. UE000 UE000 UE000 Note We recommend the use of adhesive to secure the knob when mounting onto switches. Knob 6
5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ALPS: UJ060 UJ0600 UJ0606
Highly reliable IC-size type with gold contact supports automatic insertion. Typical Specifications
to 0 Circuits-designed Type Product Line Soldering Highly reliable IC-size type with gold contact supports automatic insertion Actuator configuration Packaging style Typical Specifications Poles 5 Minimum
2 to 10 Circuits-designed
Dual In-line Switches to 0 Circuits-designed SSGM Series IC-size type highly reliable with gold contact supports automatic insertion. Typical Specifications Items Rating max. min. Resistive load Contact
4mm-travel, Self-return Type
Switch 4mm-travel, Self-return Type Series Two types: one has a cover and the other is an integrated design without a cover. Car Use RoHS applicable Features 4mm-travel. Reflow solderable type also available.
Water-proof structure with 3mm long travel. Typical Specifications
SPVQ structure with 3mm long travel Detector Slide Rotary Power Dual-in-line Package Product Line Poles 2 Notes Positions Changeover timing Non shorting Operating part shape Typical Specifications Terminal
12mm Square(Snap-in Type)
2mm Square( ) SKHC Series Joint stem & flat stem with stable operation feeling. Package Product Line Product No. force SKHCBJA00 0.74N direction Travel Rating Rating life mmmax.min. ma V DC 00,000 Initial
9mm Size Metal Shaft Snap-in Type
Potentiometer 9mm Size Snap-in Type RK09L Series Single-unit and dual-unit types suit a variety of controls. Typical Specifications Items Total tolerance Maximum operating voltage Total rotational angle
1.9mm-thick Two-way Operation Type. Surface mount type, two-way detection with body thickness of 1.9mm. Typical Specifications
SPVT.9mm-thick Two-way Operation Product Line Poles Positions Surface mount type, two-way detection with body thickness of.9mm Terminal type Operating direction Typical Specifications Items Rating (max.)/(min.)
100A inrush current compatible, compact and large capacity snap-in type with easy mounting. Ratings and Safety Standards C-UL-US
SDDJE 0A 0V AC Qualified Detector Power Dual-in-line Package Product Line Circuit arrangement SPST (mm) 00A inrush current compatible, compact and large capacity snap-in type with easy mounting Operating
A circuit variation of Normal Open and Normal Close. Typical Specifications
SPVS Compact Two-way Operation circuit variation of Normal Open and Normal Close Package Product Line Poles Positions Terminal type For PC board (Reflow) Lever length Standard Long Operating Typical Specifications
12mm Size Insulated Shaft Type Encoder Variety
mm Size Insulated Shaft Encoder Variety ECE Series Insulated shaft type with a push-on switch and other features has a wide variety of applications. Package Features A mm sized unit achieved high resolution,
12mm Size Insulated Shaft Type Encoder Variety
mm Size Insulated Shaft Encoder Variety ECE Series Insulated shaft type with a push-on switch and other features has a wide variety of applications. Package Features A mm sized unit achieved high resolution,
8mm Square LED Built-in (Snap-in Type)
8mm Square LED Built-in ( ) SKHJ Series LED built-in type with a good reputation for wider varieties. Product Line Without LED Product SKHJAAA010 SKHJABA010 SKHJACA010 0.98N 1.7N 2.N Travel Rating Rating
Features. Applications. 5mA 5V DC. 1,000,000cycles. 500,000cycles. 3 ycles. 500,000cycles 1V DC. 500,000cycles. 500,000cycles.
66mm ( type) SKHH Series User friendly 6G6mm type, available in a wide variety. Product Line Vertical Product SKHHAJA010 SKHHALA010 Travel Rating Rating life mmmax. min. ma V DC Features type allows the
11mm Size Metal Shaft Type Encoder Variety
mm Size Metal Shaft Encoder Variety EC Series Compact and highly reliable available in many varieties. Car Use Features Compact and highly reliable, sliding contact..mm-body height with a.mm-travel push
HMI Components. Series. Pushbutton Illuminated pushbutton. Audio and video mm mm mm
Edition 12/2014 HMI Components 95 Series Characteristics The Series 95 PCB pushbuttons can be used in combination with 1.5 to 2.5 mm PCBs. The buttons are selfattaching until they are soldered. Depending
PC/104, PC/104 Plus Specification
PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch
AC SERIES DUAL 1/4 (6.35mm) / XLR
AC SERIES DUAL 1/4 (6.35mm) / XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 ) phone jack
Indicator, round, raised, full face with plastic matt chrome bezel, 22.5 mm mounting, lamp block included. Yellow Green
22.5 mm 3.5 mm IP65 1 A 66 VAC Choose one component from each of the coloured sections to assemble a complete switch. For other options or further information please contact your local sales office. INDICATOR
Operating Force. Snap action/push-on type SPST. 10 ms max. (ON, OFF) 1.0 N, 1.6 N, 2.4 N, 3.5 N, 5.0 N, 7.0 N 0.15 mm±0.1 mm
3.5 mm 2.9 mm SMD Light Touch Switches Type: Features External dimensions : 3.5 mm 2.9 mm, Height 1.7 mm High operating force available (Operatingforce:7.0Nmax.) Optional ground terminal Recommended Applications
11mm Size Metal Shaft Type
ncoder mm Size Metal Shaft Series Compact and highly reliable type available in many varieties. Car Use RoHS applicable etector Features Compact and highly reliable, sliding contact type..mm-body height
Rotary DIP SWITCHES. RCO/RCR/RDO-Series
Rotary DIP SWITCHES RCO/RCR/RDO-Series 2018 Contitec Electronics Ltd. Schatzbogen 33 81829 München/Germany Tel. +49 89 99818630 Fax. +49 89 32195075 Email: sales@ contitec.com RCO- Series Type RCO-2R04T1
RTE02 and RTE03 Miniature Rotary Switches
RTE02 and RTE03 Miniature Rotary Switches RTE02 and RTE03 are two types of a subminiature rotary changeover switch to be mounted on PC boards. PC pins are in a 2.54 mm (0.100) grid. RTE02 with 2 positions
Product Code Type Operating Force Product Height and Push Plate Color. Travel Type Middle Push Travel Short Push Travel
4.7 mm 3.5 mm SMD Light Touch Switches Type: /EVQP9/EVQ3P2 Features External dimensions : 4.7 mm 3.5 mm, Height : Middle Push Travel 2.5 mm ShortPushTravel2.1mm,2.5mm High operating force and long operational
9mm Size Metal Shaft Multi-ganged Potentiometer
9mm Size Multi-ganged Potentiometer K097/K09 Series 9.mm wide, ideal for various car audio equipment controls. otary Car Use Features Typical Specifications Items tolerance Maximum operating voltage rotational
MINI-ISO AUTOMOTIVE RELAY
MINI-ISO AUTOMOTIVE RELAY CB RELAYS RoHS compliant FEATURES This relay has an Mini-ISO (International Organization for Standardization) terminal arrangement. Relay is compact and high capacity (4 A). Compact
Index for Function. Notes
PC Index for Function Mounting system Standard Reverse Product No. Pin header Ejector W SC148 SCB178 SCB18 SC149 SCB179 SCB181 SC143 SCB178 SCB18 SC15 SC145 SC146 SC147 SCB179 SCB181 SCB178 SCB18 SCB179
RACON short-travel keyswitches
General data short-travel keyswitches with sealed contact system and distinct key click, excellent switching reliability. For use under an overlay or with RK 90 keycaps. Print and SMD versions available
Magnetic and Hydraulic-Magnetic Circuit Breaker
Description Single or multipole hydraulic-magnetic circuit breakers with trip-free - mechanism and toggle actuation. A choice of switching characteristics ensures suitability for a wide range of applications.
Interface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Overview The ST Series interface connectors are specifically designed for use as Input/Output
PRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 1 SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
PRODUCT SPECIFICATION
1.0 SCOPE DDR4 DIMM SOCKET This Product Specification covers the 0.85mm centerline gold plated DDR4 DIMM edge card connector for 1.40 ± 0.10 thick memory modules..0 PRODUCT DESCRIPTION.1 PRODUCT NAME AND
Stacking Type Board-to-Board (FPC) Connector. WP10 Series
COMPONENTS PRODUCT INFORMATION NEW Stacking Type Board-to-Board (FPC) Connector WP10 Series CONNECTOR MB-0303-2 October 2015 RoHS Compliant Plug Receptacle The WP10 Series is a stacking type
One-touch connectors help reduce the number of wiring operations. 3A 125V AC 3A 125V AC L 6LRA 3FLA 125V AC AC 125V 3A2. Damper circuit. Key.
SDKQ Series One-touch connectors help reduce the number of wiring operations. Package Multi ontrol TAT Features Placing output terminals in one location enables one-touch connector wiring operation and
PRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 1 SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
KM025B Series. Features. Application. 025 ( 0.64 mm ) / Standard. Rev. 002 (' ) 1. 표준소형커넥터제품 2. 강화된체결음, 커넥터삽입력을만족한감성품질이우수한커넥터
Features 1. 표준소형커넥터제품 2. 강화된체결음, 커넥터삽입력을만족한감성품질이우수한커넥터 3. 자동차의소형, 경량화요구에대응한제품 4. 세경전선에대응가능한 W/H 작업성구현 5. 신소재를적용하여외부온도및충격에의한제품파손을개선 Application 1. Switch Unit, Heater Control Unit, Cluster, AVN etc 차량용
PRODUCT SPECIFICATION. MES3050 Rev A Date 11/06/09 T-Flash Memory Card, Push-Push + SIM Card (6-Pin), Push-Pull (2-in-1 Combo Connector).
Page 1 Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the 2-in-1 Combo Connector MES3050 (T-Flash Push-Push + SIM 6-Pin Push-Pull). 2.0 PRODUCT NAME AND PART
USB3.0 Micro-B Connector
USB3.0 Micro-B Connector ZX360 Series General The ZX360 Series is a Micro-USB connector that is compliant with the MicroUSB 3.0 specifications and supports up to 5Gbps high speed data transmission. As
Connector for SD Memory Card
for SD Compact low-profile with highly reliable contact structure. SD SIM Typical Specifications Items NEW Specifications Structure Applicable media Mounting Mounting style SD / MultiMedia Surface ing
K1F003MCH cam ammeter switch - 3 circuits A - for Ø 22 mm
Product data sheet Characteristics cam ammeter switch - 3 circuits - 90-12 A - for Ø 22 mm Complementary Main Range of product Product or component type Component name [Ith] conventional free air thermal
Thermal-Magnetic Circuit Breaker 2216-S
Thermal-Magnetic Circuit Breaker 226-S Description One and two pole thermal-magnetic circuit breaker in compact design with slide actuator, trip-free mechanism, various trip characteristics and optional
Devices raised mounting
Devices raised mounting Illuminated actuator pushbutton Front protection Switching system Ø 29 mm Contacts Typ-Nr. e Illuminated actuator pushbutton IP 67 LL 1 NC - MA UT 14-476.36 1 4 17 12.15 M UT 14-436.36
JJ Series Detector Switches
Applications JJ Series Detector Switches Automotive Instrumentation White goods Telecommunications Benefits RoHS Compliant Halogen and Lead Free Sharp detection feeling Compact Size TE Connectivity is
PRODUCT SPECIFICATION
DC Power Jack, Thru-Hole, Horizontal, w/locating Pegs, Ø2.00mm Page 1 DC Power Jack, Thru-Hole, Horizontal, w/locating Pegs, Ø2.00mm Page 2 1.0 SCOPE. DC Power Jack, Thru-Hole, Horizontal, w/locating Pegs,
Product specification
SMT Modular Jack single port vertical and horizontal 1 of 12 H PAGE 1.0 OBJECTIVE 2 2.0 SCOPE 2 3.0 GENERAL 2 4.0 DEFINITIONS 3.1 Qualification 2 3.2 Material 2 3.3 Finish 2 3.4 Design and construction
FLAT FLEXIBLE CABLE. Applications. Connection. Features & Advantages. Rating. Materials
Introduction To meet the demands of miniaturizing electronic products, to solve critical Size requirement problem, CviLux is able to produce low cost multiple pitches flat flexible cables in 0.5mm, 0.8mm,
Switches Model PB 100
Switches Model PB 100 Page 1 of 9 Features Very small dimensions, Ø 1.9 mm [0.075 ] With or without flange Different plastic colors available Different lead wire lengths available Contents 1. History Revision
Thermal-Magnetic Circuit Breaker 4220-T...
Thermal-Magnetic Circuit Breaker 40-T... Description Single, double and three pole thermal-magnetic circuit breakers with high rupture capacity to UL 489 (5 ka), EN/IEC 60934 (6kA) and UL 077 (5 ka). With
Without Indicator. With Indicator Model XM9B XM9B Contact Plating Specification 4: Gold Flash Plating
LAN Modular Jack Connectors XM9B Compact LAN Modular Jack Connectors Category 5e transmission performance met for 1, 2-3, 6 pairs. (Verified with connection to Omron XS5W-T421.) Models available with and
SPRING - LOADED CONNECTORS
SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS QUICK SELECTOR CHART SPRING-LOADED CONNECTORS AND PAD CONNECTORS GRID 1.25 mm 2.54 mm SINGLE ROW SINGLE ROW DOUBLE ROW SLC CONNECTORS SEE PAGE Straight
LUMOTAST FK. General data. Content. Pushbuttons 1-9
General data TAST illuminated pushbutton range Illuminable pushbuttons and signal lamps with lamp socket T /T / 4. Please order lamps / LEDs separately. Mounting hole diameter 6.2 mm 42 V/00 ma max. Water-jet
Memory Stick Connectors
Memory Stick Connectors CB1 Series Card Push Insert/Push Eject Card ejection distance of 1 mm Mounting height of mm Mounting area: Smaller design is 78% of former size Outline Receptacle
Materials. Specification Operating temperature range. 55 C to +105 C Current rating
PC BOARD CONNECTORS 700 SERIES Features The 700 series connector has a superior ejector with a unique flexible latch. Terminals are palladium plated and have an excellent cost performance ratio. The solder
Aluminum Electrolytic Capacitors Axial Standard Miniature
Aluminum Electrolytic Capacitors Axial Standard Miniature 041/043 ASH high voltage lower longer life 117 ASD CV-values 138 AML 105 C Fig. 1 QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø
UP1-1WF UP1-3TF UP1-5TF UP1-8TF. Applications. Ambient temperature Operation Storage. Degree of protection: Accessible range:
Undervoltage protection switch, rocker or push button actuated, 2-pole UP1-1WF UP1-3TF UP1-5TF UP1-8TF Description 2-pole switch with undervoltage release and restart protection Remote trip version Rocker
1.27mm Pitch Multi-function Two Piece Connector
1.27mm Pitch Multi-function Two Piece Connector FX2 Series Stacking connection (Stack height: 12~16mm) 12mm~16mm Horizontal Connection Vertical Connection 25mm Features 1. Various connection with various
CONTROL & SIGNALLING DEVICES Ø 22.5 PLASTIC CONSTRUCTION ECONOMY 103P SERIES PUSH BUTTON SWITCHES AND PILOT LIGHTS
R CONTROL & SIGNALLING DEVICES Ø 22.5 PLASTIC CONSTRUCTION ECONOMY 103P SERIES PUSH BUTTON SWITCHES AND PILOT LIGHTS R Control and Signalling Devices Ø 22.5 "PLASTIC CONSTRUCTION ECONOMY" type 103 P Series
DIP Switch (Slide Type)
DIP Switch (Slide Type) Low-cost DIP Switch with Slide Pins Designed to DIP (Dual Inline ) standards and allows automatic mounting with IC insertion machines. Washable with seal tape available. SMT (surface-mounted
0.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors
NEW.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors DF23 Series Low profile - 1.5 mm board-to-board distance Board-to-Board Application Plug Board Receptacle Plug Board FPC -.1 1.5 +.2 -.1
A16. Separate Construction with Cylindrical 16-dia. Body. Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.
Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.) Separate Construction with Cylindrical 16-dia. Body Miniature design of 28.5 mm, the smallest class in the industry. Detachable
NARROW-PITCH (0.8mm) CONNECTORS P8 SERIES
Socket Header Compliance with RoHS Directive FETURES 1. The product lineup consists of the low profile of 3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 7.0 mm, 8.0 mm, 11.5 mm, and 13.0 mm 14.0
microsd Card Connectors
microsd Card Connectors DM Series Jan..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features Common to the entire Series. Extremely small in size Small external dimensions and the above-the-board
PRODUCT SPECIFICATION
Dual SIM Card Connector, Retainer Type, 8-Pin, SMT, 3.0mm Profile Page 1 Dual SIM Card Connector, Retainer Type, 8-Pin, SMT, 3.0mm Profile Page 2 1.0 SCOPE. This specification covers performance, tests
1Certified LR R Inner-housing lock. Outer-housing lock
.mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board. mm pitch connector
HAMBURG INDUSTRIES CO., LTD.
SPECIFICATION OF IC CARD ACCEPTOR Model No.: ICA-703 Revision: 1.1 Issue Date: OCT. 25, 2007 HAMBURG INDUSTRIES CO., LTD. 6FL., NO.12, Lane 270, SEC. 3, Pei Shen RD., Shen Keng Hsiang, Taipei Hsien, Taiwan
8 mm series. General data. Content. Pushbuttons 1-3
General data Illuminable pushbuttons and signal lamps with lamp socket for a mounting hole diameter of 8. mm; 42 V, 250 ma Please order lamps/leds separately. Content series, illuminated pushbutton, 42
FMF. Miniature Photoelectric Sensor. Flat Type. Model Number Legend SALIENT FEATURES. Sensing. Photoelectric
Miniature Sensor Flat Type Sensing Model Number Legend 1 2 3 4 5 1. Series 4. Output NO: NPN - NO 2. Type PO: PNP - NO T: Through Beam 5. Connection D: Diffuse Reflective 2M: 2m Cable 3. Sensing Distance
Devices raised mounting
Devices raised mounting Illuminated pushbutton actuator Illuminated pushbutton actuator Front protection Switching system Contacts Diode (1N 47) Switching action Terminals b 18 x 18 mm Typ-Nr. a 18 x 24
Inverted Thru Board Card Edge: BTB
AVX has developed the 1-Piece bottom entry card edge connector to allow a perpendicular PCB to be mated to a top mounted main FR4 or metal core PCB from the bottom side. The most popular application on
Push-Pull and E-Stop Switches. Datasheet
Push-Pull and E-Stop Switches Datasheet Honeywell Push-pull and E-stop switches are durable, environmentally sealed, sliding contact switches incorporating two circuits with multiple combinations. The
1.27mm Pitch Multi-function Two Piece Connector
1.27mm Pitch Multi-function Two Piece Connector FX2 Series Stacking connection (Stack height: 12~16mm) 12mm~16mm Features 1. Various connection with various product line 2. Easy One-Touch Operation Stacking
Excellent Integrated System Limited
Excellent Integrated System Limited Stocking Distributor Click to view price, real time Inventory, Delivery & Lifecycle Information: Weidmüller 1633770000 For any questions, you can email us directly:
The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment.
Compliance with RoHS Directive The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment. FEATURES 1. 2.5 mm wide ultra-slim two-piece connectors
Inductive Proximity Sensor
Inductive Proximity Sensor Miniature, Slim-styled Proximity Sensor Space-saving Sensor ideal for timing cam and dog detection. Four mounting holes provided: two each mounting from side or rear of the housing.
TILT SENSOR SWITCH. Item No. RBS100611T Description Ball-Contact Version 15 Page 1 of 7 Publish Date May 9, 2018
Page 1 of 7 Publish Date May 9, 2018 FUNCTION Rotation detection at 45 in vertical position APPLICATIONS 1 Rotation Detection for kinds of monitor/device 2 Toys / Entertainment devices FEATURES 1 Suitable
Series mm 21 x 21 mm 21 x 27 mm IP65 3 A 250 VAC. Product Profile. Ordering Guide Choice of front bezel determines front shape
Series 7.5 mm x mm x 7 mm IP65 3 50 V INDITOR pushbutton keylock selector hoose one component from each of the coloured sections to assemble a complete switch. Product Profile The Series 7 is a high quality,
8 mm Series. General data. Content
General data Illuminable pushbuttons and signal lamps with lamp socket for a mounting hole diameter of 8. mm; 42 V, 250 ma Please order lamps/leds separately. Content Series, illuminated pushbutton, 42
PCB Keyswitches Product Survey Versions Recommended Key grid Illumination Keyswitch Signal indicator Keyswitch height Contacts RACON 8 12 mm Non-illum
PCB Keyswitches Page RACON short-travel keyswitches - 5 RACON 8-6 RACON 12-10 RACON 12 V with vertical adapter - 1 RACON 12 i - 16 RACON special accessories - 20 RF short-travel keyswitches - 23 RF 15
0.4 mm Pitch, 1.5 mm Board-to-Board Connectors with Dual Shields
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
USB Type-C TM Connector DX07 Series Receptacle
COMPONENTS PRODUCT INFORMATION NEW USB Type-C TM Connector DX07 Series Receptacle CONNECTOR MB-0297-4 December 2016 RoHS Compliant 2 Row SMT Hybrid The DX07 Series are connectors compatible
Connector with mm square contacts DIC- 131 DIC- DIC- 129 DIC- 128A DIC- 129A AC 500V AC 1000V. 20 milliohms or less
mm Pitch Connectors DIC series mm Pitch Connectors Outline The DIC series provides various connectors for switching between circuits on PCB in combination with various male connectors, for various-pattern
Type FCN Surface Mount Film Capacitors Stable Stacked Metallized Film (PEN) Chips for Reflow Soldering
Stable Stacked Metallized Film (PEN) Chips for Reflow Soldering Type FCN capacitors are designed for applications requiring a general purpose SMT capacitor with stable temperature and frequency characteristics
onlinecomponents.com
0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The use of a back lock mechanism enables a 3.15 mm (with lever) low profile design.
PRODUCT SPECIFICATION
1.25 mm pitch SMT Wire to Board Connector 1 of 7 A 1.0 SCOPE This specification covers performance, tests and quality requirements for 1.25 mm pitch Wire to Board DIP & SMT Type of 10114826~10114831 Series.
Switches and Indicators 84
Switches and Indicators 84 84 Switches and Indicators Index Series 84 Description Page 177 Product Assembly Page 178 Mounting Instruction Page 179 Product Range - pushbuttons for flush mounting - accessories
HAMBURG INDUSTRIES CO., LTD.
SPECIFICATION OF IC CARD ACCEPTOR Model No.: ICA-616 Revision: 1.1 Issue Date: OCT. 25, 2007 HAMBURG INDUSTRIES CO., LTD. 6FL., NO.12, Lane 270, SEC. 3, Pei Shen RD., Shen Keng Hsiang, Taipei Hsien, Taiwan
Type Terminal Block Connector No. of poles Appearance Model 40 XW2B-40G4 50 XW2B-50G4 40 XW2B-40G5 *1 50 XW2B-50G5 60 XW2B-60G5 40 XW2B-40G5-T
Standard-type Connector- Conversion Units XWB CSM_XWB_DS_E Simplifies Connector and terminal block replacement, and requires less in-panel wiring. Mount to DIN Track or via screws. MIL Flat Cable Connectors
microsd Card Connectors
NEW microsd Card Connectors DM Series Features Common to the entire Series. Extremely small size Small external dimensions and the above-the-board height make the connectors the smallest on the market..
Actuator Terminal Model
Sealed Snap ction Switch D2VW Watertight Miniature Snap ction Switch High-quality watertight, high-precision miniature Snap ction switch. Switch Body meets IP67 requirements Use of epoxy resin assures
AC SERIES DUAL 1/4 (6.35mm) / XLR
AC SERIES DUAL 1/4 (6.35mm) / XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 ) phone jack
E3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection method Sensing
0.4 mm Pitch, Space-saving Interface Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at your Hirose sales representative. NEW Series Small size.
Atom FBM GENERAL S SERIES. Specification CHIP FERRITE BEAD MULTILAYER TYPE. Part No. InduSTance 1. Percent RDC 2 IDC Tolerance Max Max
CHIP FERRITE BEAD MULTILAYER TYPE FBM GENERAL S SERIES Specification Part No. InduSTance 1 Percent RDC 2 IDC Tolerance Max Max (MA) FBM 0402 ST 060 S 6 @ 100 MHZ S 0.05 500 FBM 0402 ST 100 S 10 @ 100 MHZ
0.5mm Pitch FPC Connector. FA10 Series
COMPONENTS PRODUCT INFORMATION NEW 0.5mm Pitch FPC Connector FA10 Series CONNECTOR MB-0255-2 April 2016 RoHS Compliant The FA10 Series is a 0.5mm pitch, top and bottom-surface connection type, one-action
D3SK. The smallest detection switch in the industry with high precision operation. ( mm (W D H)) List of Models. Surface Mount Switch
The smallest detection switch in the industry with high precision operation. (OMRON's data as of pril 2008) (.0.5 0.9 mm (W H)) Ultra small size and ultra low profile contributing to down-sizing of sets
LTH3MM12V Series 3mm (T-1) Through Hole LED Built in Resistor for 12VDC
TM LTH3MM12V Series 3mm (T-1) Through Hole Built in Resistor for 12VDC LTH3MM12VFR44 - White Water-Clear T-1 (3 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 3 / 35 12 Volt Applications Automotive Indoor
E2EY. A Proximity Sensor for Aluminum, Brass and Other Non-ferrous Metals. Iron Is Not Detected. Aluminum-detecting Proximity Sensor
Aluminum-detecting Proximity Sensor EEY CSM_EEY_DS_E_5_1 A Proximity Sensor for Aluminum, Brass and Other Non-ferrous Metals. Iron Is Not Detected. Non-ferrous metals, such as aluminum and brass, are detected.
0.8mm Pitch Stacking Height 5 to 9mm Connector
0.8mm Pitch Stacking Height 5 to 9mm Connector FX6 Series Stacking Height: 5 to 9mm 5~9mm Features 1. Stacking Height 5 to 9mm The board to board stacking height can be set at every millimeter between
Introduction. Purpose. Introduction to JAE s HDMI Connector, DC* Series
Purpose Introduction Introduction to Objectives Application examples Main features General specifications Materials and finishes Content X pages Learning Time: X mins v1.0 1 JAE DC* Series HDMI Connector
PRODUCT SPECIFICATION TITLE PAGE REVISION
1 of 14 A 1.0 OBJECTIVE This specification defines the performance, test quality and reliability requirement of the Micro Serial-ATA Host and Device connectors. 2.0 SCOPE This specification is applicable
Q8 series. Ø8 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING LED INDICATORS
IND-Q8-1710 LED INDICATORS DISTINCTIVE FEATURES 5mm colored diffused epoxy lens or 5mm water clear super bright LEDs Prominent, recessed and flush bezel styles (2.8 x 0.8) solder lug/faston terminals,