4mm-travel, Self-return Type

Size: px
Start display at page:

Download "4mm-travel, Self-return Type"

Transcription

1 Switch 4mm-travel, Self-return Type Series Two types: one has a cover and the other is an integrated design without a cover. Car Use RoHS applicable Features 4mm-travel. Reflow solderable type also available. Applications AV devices including digital camcorders and industrial cameras Typical Specifications Items Specifications Ratingmax.min.Resistive load 0.A V DC/50BA V DC Contact resistance Initial /After lifetime 70m max./0m max. Operating force N Operating life Without load With load 0.A V DC Line Travel Operating section mm directions Length of operating sectionmm Poles Positions Mounting method Changeover timing Soldering Minimum packing unitpcs. No. Drawing No. 4 Snap-in t Non shorting Manual, Dip Reflow, Note Additional switches not included in the above list are also available. Contact us for details. For other specifications, see P.50 For specifications for the taping package, see P.5 40

2 Switch 4mm-travel, Self-return Type Series No. Dimensions Style Unit:mm PC board mounting hole dimensions Viewed from the direction A Insertion type PC board mounting face Terminal No. Travel Momentary 5 4 -C0. 6 or or 4. -C0..7 R ø0.6 holes.6 A Reflow type Travel Momentary 4 -C C0. -Pattern section PC board mounting face Terminal No. C (5) A ø ø0.9 holes 4.4 Circuit DiagramViewed from the Direction A c 4

3 Switches Specifications Items Series SSSB SSAA SSAC SSAB Operating temperature range Ratingmax.Resistive load Electrical Mechanical Initial contact resistance Insulation resistance Voltage proof Robustness of terminal Robustness of actuator Resistance to soldering heat Vibration Operating direction Pulling direction Manual soldering Dip soldering Reflow soldering 0.A 0V DC 0m max. 00M min. 500V DC 500V AC for min. 5N for min. 50N 0N 0N 5N Static force 0N 40N 0N 0N 0 to 55 to 0Hz/min., the amplitude is.5mm for all the frequencies, in the direction of X, Y and Z for hours respectively 500 0s 605 0s 0 to 60 0.A 0V DC ma 5V DC 0.A V DC 5m max. 00m max. 00M min. 00V DC 00V AC for min. 000 s max s 0m max. 00M min. 500V DC 500V AC for min s 605 0s 70m max. N for min. 500 s max s Please see P.6 Durability Operating life without load Operating life with load Load : as rating 40m max. 5,000 cycles 60m max. 45m max. 65m max. 00m max.,000 cycles 60m max.,000 cycles 80m max. 00m max. 0m max. Cold 0 for 96h Environmental Dry heat 85 for 96h Damp heat 40, 90 to 95%RH for 96h 50

4 Switches Soldering Conditions Example of Reflow Soldering Condition. Heating method: Double heating method with infrared heater.. Temperature measurement: Thermocouple 0. to 0. CA(K)or CC(T)at soldering portion(copper foil surface). A heat resisting tape should be used for fixed measurement.. Temperature profile Temperature ( C ) A max. B C Room temperature Pre-heating D max. Time (s) E max. F 0 max. SeriesReflow type -pole, -positions -pole, -positions A s max. 50 B C Ds Es Fs SSSS -pole, -positions -pole, -positions -poles, -positions SSSS7 SSAD pole, -positions -pole, -positions.5mm SSSS8 -pole, -positionsmm -pole, 4-positions -poles, -positions Notes. The condition mentioned above is the temperature on the mounting surface of a PC board. There are cases where the PC board's temperature greatly differs from that of the switch, depending on the PC board's material, size, thickness, etc. The above-stated conditions shall also apply to switch surface temperatures.. Soldering conditions differ depending on reflow soldering machines. You are requested to verify the soldering conditions thoroughly beforehand. 5

5 Switches Taping Specifications Taping Packaging Reel Size Unit:mm ø hole ø ø70~80 W Series Number of packagespcs. reel casedomestic caseexport packing Reel width Wmm Tape width mm SSSS -pole, -positions -pole, -positions,00,000,400,000 4, ,400,800 5,600 SSSS7,000 8, SSSS7 F SSSS7A SSSS7B,000 8, SSSS8 SSSS7C -pole, -positions.5mm -pole, -positionsmm -pole, -positions.5mm -pole, -positionsmm 4,800,800 4,500 9,600,600 9,000 9,00 7,00 8, pole, 4-positions -poles, -positions,500 5,000 0, ,00,00 4,400 SSAD 5,000 0,000 0, Notes. Order products in N minimum packing units reel or case.. For the SSSS7 Series only, the reel is different from what is illustrated. 5

Highly reliable IC-size type with gold contact supports automatic insertion. Typical Specifications

Highly reliable IC-size type with gold contact supports automatic insertion. Typical Specifications to 0 Circuits-designed Type Product Line Soldering Highly reliable IC-size type with gold contact supports automatic insertion Actuator configuration Packaging style Typical Specifications Poles 5 Minimum

More information

2 to 10 Circuits-designed

2 to 10 Circuits-designed Dual In-line Switches to 0 Circuits-designed SSGM Series IC-size type highly reliable with gold contact supports automatic insertion. Typical Specifications Items Rating max. min. Resistive load Contact

More information

12mm Square(Snap-in Type)

12mm Square(Snap-in Type) 2mm Square( ) SKHC Series Joint stem & flat stem with stable operation feeling. Package Product Line Product No. force SKHCBJA00 0.74N direction Travel Rating Rating life mmmax.min. ma V DC 00,000 Initial

More information

2.5mm-travel Large-sized Horizontal Type

2.5mm-travel Large-sized Horizontal Type Switch mm-travel Large-sized SPUN Series Large horizontal type suitable for multiple circuits. Typical Specifications Items Rating(max.)/(min.) (Resistive load) Contact resistance (Initial /After operating

More information

8mm Square LED Built-in (Snap-in Type)

8mm Square LED Built-in (Snap-in Type) 8mm Square LED Built-in ( ) SKHJ Series LED built-in type with a good reputation for wider varieties. Product Line Without LED Product SKHJAAA010 SKHJABA010 SKHJACA010 0.98N 1.7N 2.N Travel Rating Rating

More information

Water-proof structure with 3mm long travel. Typical Specifications

Water-proof structure with 3mm long travel. Typical Specifications SPVQ structure with 3mm long travel Detector Slide Rotary Power Dual-in-line Package Product Line Poles 2 Notes Positions Changeover timing Non shorting Operating part shape Typical Specifications Terminal

More information

11mm Size Metal Shaft Type Encoder Variety

11mm Size Metal Shaft Type Encoder Variety mm Size Metal Shaft Encoder Variety EC Series Compact and highly reliable available in many varieties. Car Use Features Compact and highly reliable, sliding contact..mm-body height with a.mm-travel push

More information

1.9mm-thick Two-way Operation Type. Surface mount type, two-way detection with body thickness of 1.9mm. Typical Specifications

1.9mm-thick Two-way Operation Type. Surface mount type, two-way detection with body thickness of 1.9mm. Typical Specifications SPVT.9mm-thick Two-way Operation Product Line Poles Positions Surface mount type, two-way detection with body thickness of.9mm Terminal type Operating direction Typical Specifications Items Rating (max.)/(min.)

More information

Features. Applications. 5mA 5V DC. 1,000,000cycles. 500,000cycles. 3 ycles. 500,000cycles 1V DC. 500,000cycles. 500,000cycles.

Features. Applications. 5mA 5V DC. 1,000,000cycles. 500,000cycles. 3 ycles. 500,000cycles 1V DC. 500,000cycles. 500,000cycles. 66mm ( type) SKHH Series User friendly 6G6mm type, available in a wide variety. Product Line Vertical Product SKHHAJA010 SKHHALA010 Travel Rating Rating life mmmax. min. ma V DC Features type allows the

More information

A circuit variation of Normal Open and Normal Close. Typical Specifications

A circuit variation of Normal Open and Normal Close. Typical Specifications SPVS Compact Two-way Operation circuit variation of Normal Open and Normal Close Package Product Line Poles Positions Terminal type For PC board (Reflow) Lever length Standard Long Operating Typical Specifications

More information

11mm Size Metal Shaft Type

11mm Size Metal Shaft Type ncoder mm Size Metal Shaft Series Compact and highly reliable type available in many varieties. Car Use RoHS applicable etector Features Compact and highly reliable, sliding contact type..mm-body height

More information

12mm Size Insulated Shaft Type Encoder Variety

12mm Size Insulated Shaft Type Encoder Variety mm Size Insulated Shaft Encoder Variety ECE Series Insulated shaft type with a push-on switch and other features has a wide variety of applications. Package Features A mm sized unit achieved high resolution,

More information

12mm Size Insulated Shaft Type Encoder Variety

12mm Size Insulated Shaft Type Encoder Variety mm Size Insulated Shaft Encoder Variety ECE Series Insulated shaft type with a push-on switch and other features has a wide variety of applications. Package Features A mm sized unit achieved high resolution,

More information

9mm Size Metal Shaft Snap-in Type

9mm Size Metal Shaft Snap-in Type Potentiometer 9mm Size Snap-in Type RK09L Series Single-unit and dual-unit types suit a variety of controls. Typical Specifications Items Total tolerance Maximum operating voltage Total rotational angle

More information

mm TACT Switch (Radial)

mm TACT Switch (Radial) 6.06.0mm Switc () SKHV dovantage in excellent mounting efficiency. Ground terminal rersion is also available. Car Use Package Mount Features Supplied wit radial taping. llows automatic insertion onto PC

More information

A highly reliable contact structure makes a thickness of only 2.75 mm possible. SD Memory Card / MultiMediaCard. Surface mounting type

A highly reliable contact structure makes a thickness of only 2.75 mm possible. SD Memory Card / MultiMediaCard. Surface mounting type SD Memory A highly reliable contact structure makes a thickness of only.75 mm possible. SD Memory minisd Features To defend from loss when memory card was ejected, halflock structure is adopted. Media

More information

100A inrush current compatible, compact and large capacity snap-in type with easy mounting. Ratings and Safety Standards C-UL-US

100A inrush current compatible, compact and large capacity snap-in type with easy mounting. Ratings and Safety Standards C-UL-US SDDJE 0A 0V AC Qualified Detector Power Dual-in-line Package Product Line Circuit arrangement SPST (mm) 00A inrush current compatible, compact and large capacity snap-in type with easy mounting Operating

More information

Product Code Type Operating Force Product Height and Push Plate Color. Travel Type Middle Push Travel Short Push Travel

Product Code Type Operating Force Product Height and Push Plate Color. Travel Type Middle Push Travel Short Push Travel 4.7 mm 3.5 mm SMD Light Touch Switches Type: /EVQP9/EVQ3P2 Features External dimensions : 4.7 mm 3.5 mm, Height : Middle Push Travel 2.5 mm ShortPushTravel2.1mm,2.5mm High operating force and long operational

More information

Index for Function. Notes

Index for Function. Notes PC Index for Function Mounting system Standard Reverse Product No. Pin header Ejector W SC148 SCB178 SCB18 SC149 SCB179 SCB181 SC143 SCB178 SCB18 SC15 SC145 SC146 SC147 SCB179 SCB181 SCB178 SCB18 SCB179

More information

9mm Size Metal Shaft Multi-ganged Potentiometer

9mm Size Metal Shaft Multi-ganged Potentiometer 9mm Size Multi-ganged Potentiometer K097/K09 Series 9.mm wide, ideal for various car audio equipment controls. otary Car Use Features Typical Specifications Items tolerance Maximum operating voltage rotational

More information

SD Memory Card Connectors

SD Memory Card Connectors SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion

More information

Connector for SD Memory Card

Connector for SD Memory Card for SD Compact low-profile with highly reliable contact structure. SD SIM Typical Specifications Items NEW Specifications Structure Applicable media Mounting Mounting style SD / MultiMedia Surface ing

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION 1.25 mm pitch SMT Wire to Board Connector 1 of 7 A 1.0 SCOPE This specification covers performance, tests and quality requirements for 1.25 mm pitch Wire to Board DIP & SMT Type of 10114826~10114831 Series.

More information

The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment.

The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment. Compliance with RoHS Directive The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment. FEATURES 1. 2.5 mm wide ultra-slim two-piece connectors

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 1 SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality

More information

0.4 mm Contact Pitch 1.5 mm above the board Board-to-Board /Board-to-FPC Connectors

0.4 mm Contact Pitch 1.5 mm above the board Board-to-Board /Board-to-FPC Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION 1.0 SCOPE DDR4 DIMM SOCKET This Product Specification covers the 0.85mm centerline gold plated DDR4 DIMM edge card connector for 1.40 ± 0.10 thick memory modules..0 PRODUCT DESCRIPTION.1 PRODUCT NAME AND

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 1 SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality

More information

Devices raised mounting

Devices raised mounting Devices raised mounting Illuminated actuator pushbutton Front protection Switching system Ø 29 mm Contacts Typ-Nr. e Illuminated actuator pushbutton IP 67 LL 1 NC - MA UT 14-476.36 1 4 17 12.15 M UT 14-436.36

More information

SD Memory Card Connectors

SD Memory Card Connectors SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Nov..6 Feb..8 Copyright 8 6 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Withstands higher force of card

More information

0.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors

0.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors NEW.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors DF23 Series Low profile - 1.5 mm board-to-board distance Board-to-Board Application Plug Board Receptacle Plug Board FPC -.1 1.5 +.2 -.1

More information

1.25mm Pitch Miniature Crimping Connector

1.25mm Pitch Miniature Crimping Connector 1.25mm Pitch Miniature Crimping Connector DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight type)

More information

NARROW PITCH (0.4 mm) CONNECTORS F4S SERIES

NARROW PITCH (0.4 mm) CONNECTORS F4S SERIES NARROW-PITCH, THIN AN SLIM CONNECTOR FOR BOAR-TO-FPC CONNECTION FEATURES 1. Space-saving (3.6 mm widthwise) The required space is smaller than our F4 series (40-contact type): 27% smaller, 38% smaller

More information

Atom FBM GENERAL S SERIES. Specification CHIP FERRITE BEAD MULTILAYER TYPE. Part No. InduSTance 1. Percent RDC 2 IDC Tolerance Max Max

Atom FBM GENERAL S SERIES. Specification CHIP FERRITE BEAD MULTILAYER TYPE. Part No. InduSTance 1. Percent RDC 2 IDC Tolerance Max Max CHIP FERRITE BEAD MULTILAYER TYPE FBM GENERAL S SERIES Specification Part No. InduSTance 1 Percent RDC 2 IDC Tolerance Max Max (MA) FBM 0402 ST 060 S 6 @ 100 MHZ S 0.05 500 FBM 0402 ST 100 S 10 @ 100 MHZ

More information

onlinecomponents.com

onlinecomponents.com 0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The use of a back lock mechanism enables a 3.15 mm (with lever) low profile design.

More information

PRODUCT SPECIFICATION. MES3050 Rev A Date 11/06/09 T-Flash Memory Card, Push-Push + SIM Card (6-Pin), Push-Pull (2-in-1 Combo Connector).

PRODUCT SPECIFICATION. MES3050 Rev A Date 11/06/09 T-Flash Memory Card, Push-Push + SIM Card (6-Pin), Push-Pull (2-in-1 Combo Connector). Page 1 Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the 2-in-1 Combo Connector MES3050 (T-Flash Push-Push + SIM 6-Pin Push-Pull). 2.0 PRODUCT NAME AND PART

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION Dual SIM Card Connector, Retainer Type, 8-Pin, SMT, 3.0mm Profile Page 1 Dual SIM Card Connector, Retainer Type, 8-Pin, SMT, 3.0mm Profile Page 2 1.0 SCOPE. This specification covers performance, tests

More information

Devices raised mounting

Devices raised mounting Devices raised mounting Illuminated pushbutton actuator Illuminated pushbutton actuator Front protection Switching system Contacts Diode (1N 47) Switching action Terminals b 18 x 18 mm Typ-Nr. a 18 x 24

More information

Meet requirements of USB 2.0

Meet requirements of USB 2.0 NEW Meet requirements of USB.0 UX Series Features 1. Certified to perform as required in USB.0 Standard Tested and certified by USB Association approved laboratory the connectors will perform at transmission

More information

0.4 mm Pitch, Space-saving Interface Connectors

0.4 mm Pitch, Space-saving Interface Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at your Hirose sales representative. NEW Series Small size.

More information

RACON short-travel keyswitches

RACON short-travel keyswitches General data short-travel keyswitches with sealed contact system and distinct key click, excellent switching reliability. For use under an overlay or with RK 90 keycaps. Print and SMD versions available

More information

Features Operating life 500,000 cycles Insertion force 40N EMV PCI & PCI ready. Card detection switch. PCI Features

Features Operating life 500,000 cycles Insertion force 40N EMV PCI & PCI ready. Card detection switch. PCI Features CCM2 MK2 Series Features Operating life 5, cycles Insertion force 4N EMV PCI & PCI ready Card detection sealed switch Typical pplications Transaction Identification POS Mechanical Number of Contacts 8

More information

onlinecomponents.com

onlinecomponents.com Short-Travel Switch MICON 5 SMT standard version SMT low version THT standard version Order no. Terminals Height [mm] Operating Force F1 [N] (+- 20% ) Switching Travel S2 [mm] (+- 0.15 mm) Operating life

More information

Operating Force. Snap action/push-on type SPST. 10 ms max. (ON, OFF) 1.0 N, 1.6 N, 2.4 N, 3.5 N, 5.0 N, 7.0 N 0.15 mm±0.1 mm

Operating Force. Snap action/push-on type SPST. 10 ms max. (ON, OFF) 1.0 N, 1.6 N, 2.4 N, 3.5 N, 5.0 N, 7.0 N 0.15 mm±0.1 mm 3.5 mm 2.9 mm SMD Light Touch Switches Type: Features External dimensions : 3.5 mm 2.9 mm, Height 1.7 mm High operating force available (Operatingforce:7.0Nmax.) Optional ground terminal Recommended Applications

More information

2.6 GHz capable, 10 W carrying power (at 2.6 GHz), 50Ω/75Ω impedance and 1 Form C relays

2.6 GHz capable, 10 W carrying power (at 2.6 GHz), 50Ω/75Ω impedance and 1 Form C relays .6 GHz capable, W carrying power (at.6 GHz), 5Ω/75Ω impedance and Form C relays RE RELAYS (ARE)..44..44 mm inch FEATURES Excellent high frequency characteristics (to.6ghz) Surface-mount type also available

More information

0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors

0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors .4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors DF4 Series Decrease in the board-occupied area Smaller width Other HRS connector DF4 3.38mm 5.mm Features 1. Higher density of the board-mounted

More information

Rotary DIP SWITCHES. RCO/RCR/RDO-Series

Rotary DIP SWITCHES. RCO/RCR/RDO-Series Rotary DIP SWITCHES RCO/RCR/RDO-Series 2018 Contitec Electronics Ltd. Schatzbogen 33 81829 München/Germany Tel. +49 89 99818630 Fax. +49 89 32195075 Email: sales@ contitec.com RCO- Series Type RCO-2R04T1

More information

FPC connectors (0.2mm pitch) Back lock

FPC connectors (0.2mm pitch) Back lock 0.9 AYF21 For FPC FPC connectors (0.2mm pitch) Back lock Y2B Series New FEATURES 1. Slim and low profile design (Pitch: 0.2 mm) 0.2 mm pitch back lock design and the slim body with a 3.15 mm depth (with

More information

SSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN

SSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature

More information

One-touch connectors help reduce the number of wiring operations. 3A 125V AC 3A 125V AC L 6LRA 3FLA 125V AC AC 125V 3A2. Damper circuit. Key.

One-touch connectors help reduce the number of wiring operations. 3A 125V AC 3A 125V AC L 6LRA 3FLA 125V AC AC 125V 3A2. Damper circuit. Key. SDKQ Series One-touch connectors help reduce the number of wiring operations. Package Multi ontrol TAT Features Placing output terminals in one location enables one-touch connector wiring operation and

More information

minisd TM Card Connectors

minisd TM Card Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

USB 2.0 Standard Connectors

USB 2.0 Standard Connectors USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization

More information

USB 2.0 Standard Connectors

USB 2.0 Standard Connectors USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization

More information

microsd Card Connectors

microsd Card Connectors NEW microsd Card Connectors DM Series Features Common to the entire Series. Extremely small size Small external dimensions and the above-the-board height make the connectors the smallest on the market..

More information

0.8mm Pitch Stacking Height 5 to 9mm Connector

0.8mm Pitch Stacking Height 5 to 9mm Connector 0.8mm Pitch Stacking Height 5 to 9mm Connector FX6 Series Stacking Height: 5 to 9mm 5~9mm Features 1. Stacking Height 5 to 9mm The board to board stacking height can be set at every millimeter between

More information

Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard

Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard NEW Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard UX60S Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features. USB 2.0 Standard data transmission

More information

JJ Series Detector Switches

JJ Series Detector Switches Applications JJ Series Detector Switches Automotive Instrumentation White goods Telecommunications Benefits RoHS Compliant Halogen and Lead Free Sharp detection feeling Compact Size TE Connectivity is

More information

microsd Card Connectors

microsd Card Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

MLVS 0402 Series Engineering Specification

MLVS 0402 Series Engineering Specification MLVS 0402 Series 1. Scope This specification is applicable to Chip Metal Oxide Varistor in multilayer technology.the customer designed part number drawing take precedence over this specification. For RoHS

More information

High Density FPC Connector (0.3mm/0.4mm/0.5mm Pitch)

High Density FPC Connector (0.3mm/0.4mm/0.5mm Pitch) High Density FPC Connector (0.3mm/0.4mm/0.5mm Pitch) FH16 Series FH16 Series Variation 0.3mm pitch 60 contact 0.3mm pitch 80 contact 0.3mm pitch 90 contact 0.4mm pitch 80 contact 0.5mm pitch 50 contact

More information

SFI Electronics Technology. Super High Network (SHN) Series. Approval Sheet. Customer Information. Part No. : Model No. : Company Purchase R&D

SFI Electronics Technology. Super High Network (SHN) Series. Approval Sheet. Customer Information. Part No. : Model No. : Company Purchase R&D Approval Sheet Customer Information Customer : Part Name : Part No. : Model No. : Company Purchase R&D Vendor Information Name: Part Name Part No. INC. Chip Surge Protection Device (CSPD) Series Lot No.

More information

1mm Pitch Double Rows Low Profile Wire-to-Board Connectors

1mm Pitch Double Rows Low Profile Wire-to-Board Connectors mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF series Features. Contact Pitch mm contact pitch allows reliable solder and cable termination.. Reliable electrical connection wipe Effective

More information

RTE02 and RTE03 Miniature Rotary Switches

RTE02 and RTE03 Miniature Rotary Switches RTE02 and RTE03 Miniature Rotary Switches RTE02 and RTE03 are two types of a subminiature rotary changeover switch to be mounted on PC boards. PC pins are in a 2.54 mm (0.100) grid. RTE02 with 2 positions

More information

0.4 mm Contact Pitch, Board-to-FPC Connectors

0.4 mm Contact Pitch, Board-to-FPC Connectors .4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H =.8 mm type) Molded structure Two-point contact system Nov.1.217 Copyright 217 HIROSE ELECTRIC CO., LTD. All Rights

More information

Construction. Mechanical data Number of Contacts 6, 8 or 16. Electrical data Insulation resistance Contact resistance max. Switch contact resistance

Construction. Mechanical data Number of Contacts 6, 8 or 16. Electrical data Insulation resistance Contact resistance max. Switch contact resistance 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 45 CCM04 MKII The CCM04 without card guidance is used where space is at a premium and the card guidance can be built around the connector (rather than provided

More information

PC/104, PC/104 Plus Specification

PC/104, PC/104 Plus Specification PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch

More information

HMI Components. Series. Pushbutton Illuminated pushbutton. Audio and video mm mm mm

HMI Components. Series. Pushbutton Illuminated pushbutton. Audio and video mm mm mm Edition 12/2014 HMI Components 95 Series Characteristics The Series 95 PCB pushbuttons can be used in combination with 1.5 to 2.5 mm PCBs. The buttons are selfattaching until they are soldered. Depending

More information

How to Order CB 03 Y T Y N 601

How to Order CB 03 Y T Y N 601 (General Use) Features Standard type used to suppress lower-frequency, lower current signals. Impedance over a broad frequency range. Suitable for flow and reflow soldering Available in 8 sizes. Applications

More information

Common Mode Noise Filter. LCFE Series. Description. Features. Applications. 1210mm Size. Source Meter. LCR Meter (3GHz) Source Meter.

Common Mode Noise Filter. LCFE Series. Description. Features. Applications. 1210mm Size. Source Meter. LCR Meter (3GHz) Source Meter. Description This specification covers the engineering requirements for both Common Mode Noise Filter (CMF) and ESD Protection, especially high speed differential serial interfaces, such as USB 3., USB

More information

1.27mm Pitch Two-Piece Connector

1.27mm Pitch Two-Piece Connector All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

Interface Connectors for Miniature, Portable Terminal Devices

Interface Connectors for Miniature, Portable Terminal Devices All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

D3SK. The smallest detection switch in the industry with high precision operation. ( mm (W D H)) List of Models. Surface Mount Switch

D3SK. The smallest detection switch in the industry with high precision operation. ( mm (W D H)) List of Models. Surface Mount Switch The smallest detection switch in the industry with high precision operation. (OMRON's data as of pril 2008) (.0.5 0.9 mm (W H)) Ultra small size and ultra low profile contributing to down-sizing of sets

More information

ES3 Series (WF2 Type) (culus Certified Product)

ES3 Series (WF2 Type) (culus Certified Product) COMPONENTS PRODUCT INFORMATION NEW Board-to Cable Connector For LED Lighting Power Supply ES3 Series (WF2 Type) (culus Certified Product) CONNECTOR MB-0227-3 July 2012 RoHS Compliant Receptacle (ES3B002WF2)

More information

Contact form. Operating Force. SPDT 25g Unsealed Solder / 187 Quick Connect. SPDT 50g Unsealed Solder / 187 Quick Connect

Contact form. Operating Force. SPDT 25g Unsealed Solder / 187 Quick Connect. SPDT 50g Unsealed Solder / 187 Quick Connect VX Miniature Snap Action Switch Compact snap action switch with low force operation Internal mechanism assures outstanding contact reliability Models available for micro load up through 5 Amps ROHS Compliant

More information

Top-actuated (B3U-1000 Series)

Top-actuated (B3U-1000 Series) Ultra-small Tactile Switch BU Ultra-small-sized Tactile Switch with High Contact Reliability: 1.2 x x 2.5 mm (H x W x D) Industry s smallest switch* allows high-density mounting on PCBs for mobile equipment.

More information

XCKN2118G11 limit switch XCKN - thermoplastic roller lever - 1NC+1NO - snap - Pg11

XCKN2118G11 limit switch XCKN - thermoplastic roller lever - 1NC+1NO - snap - Pg11 Characteristics limit switch XCKN - thermoplastic roller lever - 1NC+1NO - snap - Pg11 Complementary Tracks Switch actuation Electrical connection Contacts insulation form Positive opening Positive opening

More information

For board-to-board. Narrow pitch connectors (0.5mm pitch)

For board-to-board. Narrow pitch connectors (0.5mm pitch) Discontinued Discontinued as as of of September September 30, 30, 013 013 For board-to-board Narrow pitch connectors (0.5mm pitch) P5KL Series 5.8mm 3.3mm Products are discontinued. FEATURES 1. Low profile

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION DC Power Jack, Thru-Hole, Horizontal, w/locating Pegs, Ø2.00mm Page 1 DC Power Jack, Thru-Hole, Horizontal, w/locating Pegs, Ø2.00mm Page 2 1.0 SCOPE. DC Power Jack, Thru-Hole, Horizontal, w/locating Pegs,

More information

Mini PCI Express Card Socket

Mini PCI Express Card Socket Mini PCI Express Card Socket Document No: Page: 1 of 4 1. Scope This specification covers the material and performance requirements for the Mini PCI Express Card Socket series. 2. Applicable documents

More information

Transistor drive 2c/4c 5A slim power relays

Transistor drive 2c/4c 5A slim power relays Transistor drive c/c 5A slim power relays NC RELAYS NC Flat type () NC (Plug-in type) RoHS compliant NC Flat type () NC () FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic

More information

April Common Mode Filters. With built-in ESD protection element type. TCE series. * Dimensions Code JIS[EIA]

April Common Mode Filters. With built-in ESD protection element type. TCE series. * Dimensions Code JIS[EIA] E M C C o m p o n e n t s April 204 Common Mode Filters With built-in ESD protection element type TCE series TCE0806G TCE0806S TCE608G [0302 inch]* [0302 inch] [0603 inch] * Dimensions Code JIS[EIA] (2/4)

More information

1 Form A 8A/16A, Small Polarized Power Relays (latching type)

1 Form A 8A/16A, Small Polarized Power Relays (latching type) 8A/16A, Small Polarized Power Relays (latching type) DW RELAYS (ADW1) New Low profile type (Inrush type) FEATURES 1. Low profile type available (h = 15.8 mm.622 inch) 2. Inrush type available (TV-8 UL/C-UL

More information

TCE0806S Type. Common Mode Filters. Caution. TCE Series. With built-in ESD protection element type. June May 18, Mar.

TCE0806S Type. Common Mode Filters. Caution. TCE Series. With built-in ESD protection element type. June May 18, Mar. E M C C o m p o n e n t s June 2017 Common Mode Filters With built-in ESD protection element type TCE Series TCE0806S [0302 inch]* * Dimensions Code JIS[EIA] Caution May 18, 2017 Mar. 29, 2019 Sep. 30,

More information

2.54mm Pitch Board to Board Connector

2.54mm Pitch Board to Board Connector All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

Metal Oxide Varistor:TVB Series

Metal Oxide Varistor:TVB Series Features. RoHS compliant 2. Available for SMT flow/reflow soldering 3. Low profile and space saving 4. Large capability to withstand high surge current 5. Low inductance construction with excellent response

More information

1.27mm Pitch Two-Piece Connectors

1.27mm Pitch Two-Piece Connectors 1.7mm Pitch Two-Piece Connectors HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-833) HIF Series (Board direct mount type) Features 1. Product Variation The

More information

Construction. Mechanical data Number of Contacts 7. Electrical data Insulation resistance Contact resistance max. Environmental data.

Construction. Mechanical data Number of Contacts 7. Electrical data Insulation resistance Contact resistance max. Environmental data. 1136 ITT - CCM Catalog 11/20/00 12:29 PM Page 59 The is a connector for MultiMediaCards. These cards have been developed as small form factor memory cards with ROM and RAM capabilities. The connector provides

More information

MLVG0402 Series Engineering Specification

MLVG0402 Series Engineering Specification RoHS Pb MLVG0402 Series Engineering 1. Scope (1) Lead free type (2) SMD type zinc oxide based ceramic chip (3) Insulator over coat keeps excellent low and stable leakage current (4) Plating termination

More information

Type. Overstroke travel. Short push travel. Type Heigh Packing

Type. Overstroke travel. Short push travel. Type Heigh Packing 6 mm Square Thin Type SMD Light Touch Switches 6mm Square Middle Travel SMD Light Touch Switch Type: EVQP0 EVPF Features External dimensions : 6.5 mm mm, Height 1.8 mm (Excluding the push plate) External

More information

Indicator, round, raised, full face with plastic matt chrome bezel, 22.5 mm mounting, lamp block included. Yellow Green

Indicator, round, raised, full face with plastic matt chrome bezel, 22.5 mm mounting, lamp block included. Yellow Green 22.5 mm 3.5 mm IP65 1 A 66 VAC Choose one component from each of the coloured sections to assemble a complete switch. For other options or further information please contact your local sales office. INDICATOR

More information

2mm Pitch Miniature Connector for HDD

2mm Pitch Miniature Connector for HDD 2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be

More information

XCMD21F0L2 limit switch XCMD - M12 metal end plunger - 1NC+1NO - snap - 2 m

XCMD21F0L2 limit switch XCMD - M12 metal end plunger - 1NC+1NO - snap - 2 m Characteristics limit switch XCMD - M12 metal end plunger - 1NC+1NO - snap - 2 m Complementary Switch actuation Electrical connection Cable length Cable composition Wire insulation material Contacts insulation

More information

2mm Pitch Miniature Connector

2mm Pitch Miniature Connector mm Pitch Miniature Connector A A Series Product Specifications Rating Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted

More information

Mechanical data Number of Contacts 8 or 16. Card extraction force. Electrical data Insulation resistance Contact resistance max. Card detection switch

Mechanical data Number of Contacts 8 or 16. Card extraction force. Electrical data Insulation resistance Contact resistance max. Card detection switch 1136 ITT - CCM Catalog 11/20/00 12:27 PM Page 8 CCM01 MK I CCM01 MK I connectors have fixed contacts and a blade card detection switch (not sealed). These connectors are intended for applications where

More information

Interface Connectors for Portable Terminal Devices

Interface Connectors for Portable Terminal Devices Interface Connectors for Portable Terminal Devices ST Series Overview The ST Series interface connectors are specifically designed for use as Input/Output (I/O) connectors on portable information devices.

More information

MULTILAYER CHIP VARISTOR. For ESD / Surge Protection. VZ0402 Green Material Series. Size Walsin Technology Corporation

MULTILAYER CHIP VARISTOR. For ESD / Surge Protection. VZ0402 Green Material Series. Size Walsin Technology Corporation MULTILAYER CHIP VARISTOR For ESD / Surge Protection Size 0402 Series *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_VZ0402 Green Series- V06 Nov. 2005 REVISION HISTORY

More information

SPRING - LOADED CONNECTORS

SPRING - LOADED CONNECTORS SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS QUICK SELECTOR CHART SPRING-LOADED CONNECTORS AND PAD CONNECTORS GRID 1.25 mm 2.54 mm SINGLE ROW SINGLE ROW DOUBLE ROW SLC CONNECTORS SEE PAGE Straight

More information

XCKL115 limit switch XCKL - thermoplastic roller lever - 1NC+1NO - snap - Cable gland

XCKL115 limit switch XCKL - thermoplastic roller lever - 1NC+1NO - snap - Cable gland Characteristics limit switch XCKL - thermoplastic roller lever - 1NC+1NO - snap - Cable gland Complementary Switch actuation Electrical connection Contacts insulation form Number of steps 1 Positive opening

More information

1.27mm Pitch Two-Piece Connector

1.27mm Pitch Two-Piece Connector 1.7mm Pitch Two-Piece Connector HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-83503) HIF Series (Board direct mount type) HIF5 Series 1 (Card edge type)

More information

DIP Switch (Slide Type)

DIP Switch (Slide Type) DIP Switch (Slide Type) Low-cost DIP Switch with Slide Pins Designed to DIP (Dual Inline ) standards and allows automatic mounting with IC insertion machines. Washable with seal tape available. SMT (surface-mounted

More information