12mm Size Insulated Shaft Type Encoder Variety

Transcription

1 mm Size Insulated Shaft Encoder Variety ECE Series Insulated shaft type with a push-on switch and other features has a wide variety of applications. Package Features A mm sized unit achieved high resolution, pulse/ detent and 4 pulse/4 detent. Used a new structure for the shaft and bushing, and achieved a high precision, responsive system. Also available with a 0. mm push switch. type. Applications Controls for image and sound devices, including DVD players, mini component stereos, CD players, portable audio players and monitors Controls for audio mixers and electronic instruments Typical Specifications Specifications 0.mA V DC life Without detent Other,000 cycles 0,000 cycles Line With High Collar Length of operating section mm mnm 0 to Lightestjog to Lightestjog Vertical force of switchn unitpcs.,00 Lightestjog 0 ECE404A6 0 max. Without 0 ECE40404 ECE4040 Travel of push-on switchmm ECE040 ECE0406 ECE040 ECE00 ECE4040 ECE40406 ECE400 ECE404A ECE404A ECE404A8 ECE404A9 ECE400 ECE4404A8 ECE4404A6 ECE

2 mm Size Insulated Shaft Encoder Variety ECE Series Line With Bushing Length of operating sectionmm mnm to 0 Heavy 40 4 Without 4 Travel of push-on force of switchn switchmm Vertical unitpcs. 90 ECE08 ECE4080 ECE4080 ECE4080 ECE40804 ECE4080 ECE With Switch Length of operating sectionmm mnm to 0 Lightestjog 4 Note No nuts or washers attached. If necessary, contact us. 4 Vertical force of switchn 6 Travel of push-on switchmm 0. unitpcs.,00 ECE444A ECE4440 ECE44404 ECE444A4 ECE4444A ECE ECE4444A Package Dimensions Model. LM () R Style 4.4 (8.) PC board mounting hole dimensions Viewed from mounting face. (0.) LM. R 0 -ø holes Short shaft. (0.6) 4.4 (8.). (0.) Mounting. surface ACB -ø holes For other products, check varieties on P.9 For other detailed specifications, see P.94 9

3 mm Size Insulated Shaft Encoder Variety ECE Series Dimensions Model Style PC board mounting hole dimensions Viewed from mounting face Hollow shaft (0.6).6.6 (0.) 4.4 (8.) ø ø holes Package With bushing.. LM LB R 4. (0.) 4.4 (8.) Locating lug detail Mounting surface M9G0... With push-on switch 0.4 X Y Y X.. LM 6 () R 0. Switch travel LM 0 LB R (8.) -ø holes. D E (0.) D E LM R ø holes 9

4 mm Size Insulated Shaft Encoder Variety Shaft Dimensions Flat With high collar type Detail dimensions LM R Vertical type LM R With bushing type... LB LM R 4. Detail dimensions LM LB 0 0 Except detent. R Package 9

5 mm Size Insulated Shaft Specifications temperature range Maximum operating current Resistive load Output signal mm size insulated shaft encoders detent Without detent With switch 0 to 60 ma 0.mA V DC Output of A and B signals, proportionate to phase difference A signal OFF ON Output wave B signal OFF ON Package Electrical VV.V max. R CW Test circuit V DC R Terminal A Terminal B Detent stabillity point When the switch is provided V Output waveform t t V Sliding noise Encoder Terminal C /s V ON OFF ON Sliding t : Masking time to avoid chattering At R = 0k Chattering : ms max. Bounce : ms max. Insulation resistance 0M min. 0V DC Voltage proof Rotational torque mnm, to 0mNm 0V AC mnm, 0mNm max., 40mNm mnm, to 0mNm Mechanical -pull strength Resistance to heat Manual Dip Reflow 80N 00 or less, or within s 60, s 0N Durability Rotational life 0,000 cycles,000 cycles 0,000 cycles Cold 40 for 40h Environmental Dry heat Damp heat 8 for 40h 40, 90 to 9%RH for 40h -on Switch Specifications Switch circuitthe number of contact Travel of switch force of switch Contact resistance life mm size insulated shaft encoders Single pole and single throw-on mm..0 N or 6 ma V DC 00m for initial period; 00m after rotational life 0,000 times min. 94