Index for Function. Notes
|
|
|
- Elfreda Merryl Allison
- 5 years ago
- Views:
Transcription
1 PC Index for Function Mounting system Standard Reverse Product No. Pin header Ejector W SC148 SCB178 SCB18 SC149 SCB179 SCB181 SC143 SCB178 SCB18 SC15 SC145 SC146 SC147 SCB179 SCB181 SCB178 SCB18 SCB179 SCB181 SCB179 SCB SD Memory Dimensions mm D 95.6 minisd H Voltage 5V 3.3V Stand-off mm mm Left Position of knob Right IC Minimum packing unitpcs. 1,2 PC Page Photo No. Stand-off mm Position of knob : Left Stand-off mm Position of knob : Right Stand-off mm Position of knob : Left Stand-off mm Position of knob : Right Notes 1. It is requested that the order placed be an integer multiple of the minimum packing units. 2. For export packing, please consult lps. 58
2 PC Connector SC, SCB Series High soldering reliability achieved by our unique terminal arrangement. SD Memory minisd IC Features Compact, light due to simple construction. Eject knob can be placed to left or right. Stand-off available (/mm). Pin header (SC1) is provided with attachment section for automatic. Typical Specifications Items pplicable media pplications Set top boxes, printers, digital cameras, car navigation, portable terminals, personal computers, audio-visual devices, industrial devices Specifications PC s which confirm to PC card standard5v, 3.3V PC Structure Mounting method Contact pitch Number of contacts Surface type 7mm 68 Pins Operating temperature range 2 to 6 Voltage proof 25V C 1 minute Performance Insulation resistance(initial) Contact resistance(initial) 1,M min. 4m max. Mating and unmating cycle Office environment1, cycles Outside office environment5, cycles
3 PC Connector SC, SCB Series Products List Pin Header Mounting system VoltageV Stand-off mm Product No. Standard Reverse Note For the dimensions, see Drawing No. 1 or 2 depending on the position of the ejector knob. SC148 SC149 SC143 SC15 SC145 SC146 SC147 SD Memory minisd Ejector Position of knob Left Right Stand-off mm Product No. SCB178 SCB179 SCB18 SCB181 Drawing No. Notes 1. When ordering, indicate the ejector knob position viewed from the card inserting direction when you can see the ejector nut. 2. The pin headers and the ejectors are supplied as separate parts. When using them, solder a pin header to a printed circuit board, assemble an ejector to the pin header and screw it. 1 2 IC PC 6
4 PC Connector SC, SCB Series Common Specifications ( PC board dimensions) Unit : mm Stand-off mm Position of knobleft SD Memory Positioning boss hole ø.5 min. (.63567)= Pitch.635 Land width.35 Mounting holes 2-ø Positioning boss hole(oval) minisd 1.9 min..3 min. 1 Mounting holes 2-ø3.2 exposed in this area. 5.9 max. No part For the Stand-off -mm type, no part can be mounted on the bottom surface. 3 IC insertion direction 34.3 min min. 8.3 Positioning boss hole ø.5 min. (.63567)= Mounting holes 2-ø Positioning boss hole(oval) Pitch.635 Land width max min. Mounting holes 2-ø PC Stand-off mm Position of knobleft 1.9 min..3 min. 2 exposed in this area ( ) No part Except for the area in which no components may be mounted, components no larger than 2 mm high may be mounted. insertion direction min min. 61
5 PC Connector SC, SCB Series Common Specifications(PC board dimensions) Unit : mm Stand-off mm Position of knobright Positioning boss hole ø.5 min. (.63567)= Pitch Land width Mounting holes 2-ø Positioning boss hole (Oval) SD Memory 1.9 min. Mounting holes.3 min. 2-ø3.2 exposed in this area 5.9 max. No part For the Stand-off mm type, no part can be mounted on the bottom surface. minisd insertion direction 31.4 min min. 2. IC Stand-off mm Position of knobright Positioning boss hole ø.5 min. (.63567)= Mounting holes 2-ø Positioning boss hole (Oval) PC Pitch min. Land width.35.3 min. Mounting holes 2-ø max. exposed in this area 77.5 min. No part Except for the area in which no components may be mounted, components no large than 2 mm high may be mounted insertion direction min min. 62
6 PC Connector SC, SCB Series Dimensions Unit : mm No. Style Position of knobleft SD Memory minisd (Show PC board dimensions.) Pitch.63567= Terminal row(n=68) 1 (When card is in.) 95.6 (Show PC board dimensions.) SCB IC SCB PC Position of knobright.2 Show PC board dimensions Pitch.63567= Terminal row(n=68) 2 8 (Show PC board dimensions.) (When card is in.) SCB SCB
7 PC Soldering Conditions Example of Reflow Soldering ConditionReference 1. Heating method: Double heating method with intrared heater. 2. Temperature measurement: Thermocouple.1 to.2 CKor CCT. 3. Temperature profile SD Memory Temperature ( C ) 2 1 Room temperature Pre-heating 12 max. 3 max. 23 max.(max. 3sec.) 2 15 Time (s) minisd Cautions IC 1. When soldering terminals, there is a danger that load placed on the terminals may cause rattle, deformation or electrical degradation to occur depending on the conditions. Caution is therefore required. 2. When soldering, do not use water soluble flux because this may corrode the product. 3. Regarding the setting of reflow conditions, please confirm them with the actual mass production conditions. 4. s PC board warping may alter characteristics, please take this into consideration when designing pattern and layout. 5. This product has been designed and manufactured for applications to ordinary electronic equipment and devices such as the V equipment, electric home applications, office machines and communications equipment, consequently, when employing these products for appliances requiring a high degree of safety and reliability such as the medical equipment, aviation and aircraft equipment, space equipment and burglar alarm equipment, the using manufacturers will please thoroughly study the proprieties of these products for the planned applications. PC 64
A highly reliable contact structure makes a thickness of only 2.75 mm possible. SD Memory Card / MultiMediaCard. Surface mounting type
SD Memory A highly reliable contact structure makes a thickness of only.75 mm possible. SD Memory minisd Features To defend from loss when memory card was ejected, halflock structure is adopted. Media
Connector for SD Memory Card
for SD Compact low-profile with highly reliable contact structure. SD SIM Typical Specifications Items NEW Specifications Structure Applicable media Mounting Mounting style SD / MultiMedia Surface ing
Highly reliable IC-size type with gold contact supports automatic insertion. Typical Specifications
to 0 Circuits-designed Type Product Line Soldering Highly reliable IC-size type with gold contact supports automatic insertion Actuator configuration Packaging style Typical Specifications Poles 5 Minimum
100A inrush current compatible, compact and large capacity snap-in type with easy mounting. Ratings and Safety Standards C-UL-US
SDDJE 0A 0V AC Qualified Detector Power Dual-in-line Package Product Line Circuit arrangement SPST (mm) 00A inrush current compatible, compact and large capacity snap-in type with easy mounting Operating
2 to 10 Circuits-designed
Dual In-line Switches to 0 Circuits-designed SSGM Series IC-size type highly reliable with gold contact supports automatic insertion. Typical Specifications Items Rating max. min. Resistive load Contact
12mm Square(Snap-in Type)
2mm Square( ) SKHC Series Joint stem & flat stem with stable operation feeling. Package Product Line Product No. force SKHCBJA00 0.74N direction Travel Rating Rating life mmmax.min. ma V DC 00,000 Initial
1.9mm-thick Two-way Operation Type. Surface mount type, two-way detection with body thickness of 1.9mm. Typical Specifications
SPVT.9mm-thick Two-way Operation Product Line Poles Positions Surface mount type, two-way detection with body thickness of.9mm Terminal type Operating direction Typical Specifications Items Rating (max.)/(min.)
4mm-travel, Self-return Type
Switch 4mm-travel, Self-return Type Series Two types: one has a cover and the other is an integrated design without a cover. Car Use RoHS applicable Features 4mm-travel. Reflow solderable type also available.
A circuit variation of Normal Open and Normal Close. Typical Specifications
SPVS Compact Two-way Operation circuit variation of Normal Open and Normal Close Package Product Line Poles Positions Terminal type For PC board (Reflow) Lever length Standard Long Operating Typical Specifications
Features. Applications. 5mA 5V DC. 1,000,000cycles. 500,000cycles. 3 ycles. 500,000cycles 1V DC. 500,000cycles. 500,000cycles.
66mm ( type) SKHH Series User friendly 6G6mm type, available in a wide variety. Product Line Vertical Product SKHHAJA010 SKHHALA010 Travel Rating Rating life mmmax. min. ma V DC Features type allows the
8mm Square LED Built-in (Snap-in Type)
8mm Square LED Built-in ( ) SKHJ Series LED built-in type with a good reputation for wider varieties. Product Line Without LED Product SKHJAAA010 SKHJABA010 SKHJACA010 0.98N 1.7N 2.N Travel Rating Rating
2.5mm-travel Large-sized Horizontal Type
Switch mm-travel Large-sized SPUN Series Large horizontal type suitable for multiple circuits. Typical Specifications Items Rating(max.)/(min.) (Resistive load) Contact resistance (Initial /After operating
XH5 SMT-compatible Connectors with a 1.27-mm Pitch
New Product Half-pitch SMT Connectors (oard to oard and oard to Cable Connectors) XH5 SMT-compatible Connectors with a -mm Pitch These SMT Connectors can be mounted on the back surfaces of circuit boards.
1mm Pitch Double Rows Low Profile Wire-to-Board Connectors
mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF series Features. Contact Pitch mm contact pitch allows reliable solder and cable termination.. Reliable electrical connection wipe Effective
PC Card Single Slot SMT Connectors for the AV Market (that Support 5 V Cards)
PC Card Single Slot SMT Connectors for the V Market (that Support 5 V Cards) IC15 Series Reliable card ejection 2-point card ejection Card ejection distance 6mm min Equipment outline Stroke: 11.7mm Ejection
Water-proof structure with 3mm long travel. Typical Specifications
SPVQ structure with 3mm long travel Detector Slide Rotary Power Dual-in-line Package Product Line Poles 2 Notes Positions Changeover timing Non shorting Operating part shape Typical Specifications Terminal
2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)
![2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)](/thumbs/96/127052325.jpg "2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)")
NEW 2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin) DF59 Series Floating Structure in Three xial Directions (Board-to-Board Structure) X
11mm Size Metal Shaft Type
ncoder mm Size Metal Shaft Series Compact and highly reliable type available in many varieties. Car Use RoHS applicable etector Features Compact and highly reliable, sliding contact type..mm-body height
Compact Flash Card Connectors
Compact Flash Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design 7. 5.75 Features. Compact design occupies minimum space Connectors are designed with small width
1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
11mm Size Metal Shaft Type Encoder Variety
mm Size Metal Shaft Encoder Variety EC Series Compact and highly reliable available in many varieties. Car Use Features Compact and highly reliable, sliding contact..mm-body height with a.mm-travel push
onlinecomponents.com
0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The use of a back lock mechanism enables a 3.15 mm (with lever) low profile design.
0.4 mm Contact Pitch 1.5 mm above the board Board-to-Board /Board-to-FPC Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment.
Compliance with RoHS Directive The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment. FEATURES 1. 2.5 mm wide ultra-slim two-piece connectors
FOR CELLULAR PHONE; ULTRA LOW PROFILE TYPE FOR PORTABLE EQUIPMENT (0.5mm PITCH)
FOR CELLULR PHONE; ULTR LOW PROFILE TYPE FOR PORTBLE EQUIPMENT (0.5mm PITCH) XR(3/5) SYSTEM CONNECTORS ULTR-LOW PROFILE TYPE (XR3) I/O CONNECTORS FOR PORTBLE EQUIPMENT (XR5) for portable equipment Receptacle
NARROW PITCH (0.4 mm) CONNECTORS F4S SERIES
NARROW-PITCH, THIN AN SLIM CONNECTOR FOR BOAR-TO-FPC CONNECTION FEATURES 1. Space-saving (3.6 mm widthwise) The required space is smaller than our F4 series (40-contact type): 27% smaller, 38% smaller
XH2. Half-pitch Board-to-Board Connectors
Half-pitch Board-to-Board Connectors XH2 Allows High-density Mounting for Electronic Devices. A Half-Pitch Connector with a 1.27-mm Pitch for Compactness. A pitch of 1.27 mm for high-density mounting of
FPC connectors (0.2mm pitch) Back lock
0.9 AYF21 For FPC FPC connectors (0.2mm pitch) Back lock Y2B Series New FEATURES 1. Slim and low profile design (Pitch: 0.2 mm) 0.2 mm pitch back lock design and the slim body with a 3.15 mm depth (with
PC/104, PC/104 Plus Specification
PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch
NARROW PITCH (0.4mm) CONNECTORS P4 SERIES
Without soldering terminal With soldering terminal NARROW-PITH ONNTORS FOR BOARD-TO-BOARD AND BOARD-TO-FP ONNTION FATURS 1. 0.4 mm pitch and support for mated heights of up to 1.5 mm, 2.0 mm, 2.5 mm, 3.0
Narrow pitch connectors (0.4mm pitch)
For board-to-board For board-to-fp Narrow pitch connectors (0.4mm pitch) P4 Series Without soldering terminals 5.1mm 3.96mm With soldering terminals FATURS 1. 0.4 mm pitch and support for mated heights
Male header, 100% protected against mismating, (1 x 1) mm straight solder pins Pin spacing 3.5 mm 3.81 mm. light gray <_ 8,5_> 3,5 1x1 <_ 9,3_>
96 Male Headers with Solder Pins; Double-Deck Male Headers with Solder Pins, Pin Spacing 3.5 mm and 3.81 mm 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5
PRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 1 SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
Miniature Push-Pull Series Atto Miniature Push-Pull
J Miniature Push-Pull Series Atto Miniature Push-Pull Technical Data Panel connector Cable connector Coupler connector Panel connector, cable connector and coupler connector circular housing Locking Push-Pull,
For board-to-fpc. Narrow pitch connectors (0.35mm pitch)
For board-to-fpc Narrow pitch connectors (0.35mm pitch) A35S Contributes to device miniaturization and advanced functionality with 2.5 mm width, 0.35 mm pitch and 0.8 mm mated height! FEATURES 1. 0.35
For board-to-fpc. Narrow pitch connectors (0.4mm pitch)
For board-to-fpc Narrow pitch connectors (0.4mm pitch) A4S Being 2.5 mm in width, it facilitates ever-increasing device miniaturization and advanced functionality! FEATURES 1. TOUGH CONTACT construction
0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors DF4 Series Decrease in the board-occupied area Smaller width Other HRS connector DF4 3.38mm 5.mm Features 1. Higher density of the board-mounted
PCI-SIG Standard M.2 Compatible Card Edge Connector CONNECTOR. SM3 Series
COMPONENTS PRODUCT INFORMATION NEW PCI-SIG Standard M.2 Compatible Card Edge Connector CONNECTOR MB-0261-2 November 2013 SM3 Series RoHS Compliant The SM3 Series is a PCI-SIG PCI Express M.2 Specification
Make sure that the MUTE button on your phone is depressed during the voice explanations.
Make sure that the MUTE button on your phone is depressed during the voice explanations. 1 2 Development of memory cards PCMCIA Type III Type I & II LARGER Compact Flash Smart Media Express Card34 Express
Dielectric withstanding voltage
Connectors EXP series Connectors for Notebook PC- for PCI-Express Outline These products have been developed as slot connectors conforming to PCMCIA/JEITA s. Features Adopts kink reinforcement structure
PC CARD CONNECTOR C TYPE
PC Card 1.27mm (.050") pitch PC CARD CONNECTOR C TYPE 68-circuit PC card connector, conforming to PCMCIA/JEIDA Ver.4.1 Features Conformity to PCMCIA (USA) and JEIDA Ver.4.1 (Japan) The ICM-C connector
P4S. High reliability, space saving type, 1.5 to 3.0 mm mated height
For board-to-board For board-to-fpc Narrow pitch connectors (0.4mm pitch) P4S High reliability, space saving type, 1.5 to 3.0 mm mated height FEATURES 1. TOUGH CONTACT construction provides high resistance
CS Series. Automation Controls Catalog
utomation Controls Catalog For board-to-micro coaxial wire Micro coaxial connectors (Space saving) CS Series 2. with strong resistance to various environments provides high contact reliability and facilitates
Narrow pitch connectors (0.4mm pitch) Radiation noise reduced by multi-point ground and shield construction
For board-to-board For board-to-fpc Narrow pitch connectors (0.4mm pitch) P4S Shield type Radiation noise reduced by multi-point ground and shield construction FEATURES 1. Radiation noise is reduced thanks
12mm Size Insulated Shaft Type Encoder Variety
mm Size Insulated Shaft Encoder Variety ECE Series Insulated shaft type with a push-on switch and other features has a wide variety of applications. Package Features A mm sized unit achieved high resolution,
Introduction. Purpose. Introduction to JAE s HDMI Connector, DC* Series
Purpose Introduction Introduction to Objectives Application examples Main features General specifications Materials and finishes Content X pages Learning Time: X mins v1.0 1 JAE DC* Series HDMI Connector
7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
NEW 7.9 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits
0.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors
NEW.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors DF23 Series Low profile - 1.5 mm board-to-board distance Board-to-Board Application Plug Board Receptacle Plug Board FPC -.1 1.5 +.2 -.1
SYSTEM CONNECTORS ULTRA-LOW PROFILE TYPE (AXR3) I/O CONNECTORS FOR PORTABLE EQUIPMENT (AXR5)
System connector ultra low profile 18, 22 and 24 contacts I/O connectors for portable equipment 18, 22, 24 and 26 contacts 50 contacts FOR CELLULR PHONE; ULTR LOW PROFILE TYPE FOR PORTBLE EQUIPMENT (0.5mm
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF PCPR CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF PCPR CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS Section PAGE 1.0 SCOPE.. 3 2.0 APPLICABLE STANDARDS 2.1 Regulatory
12mm Size Insulated Shaft Type Encoder Variety
mm Size Insulated Shaft Encoder Variety ECE Series Insulated shaft type with a push-on switch and other features has a wide variety of applications. Package Features A mm sized unit achieved high resolution,
PRODUCT SPECIFICATION
RECEPTACLE 1.0 SCOPE This Product Specification covers the performance requirements of the Serial Attach SCSI / High Speed Serialized host receptacle connector. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME
D3SK. The smallest detection switch in the industry with high precision operation. ( mm (W D H)) List of Models. Surface Mount Switch
The smallest detection switch in the industry with high precision operation. (OMRON's data as of pril 2008) (.0.5 0.9 mm (W H)) Ultra small size and ultra low profile contributing to down-sizing of sets
For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch) Excellent contact reliability and mating in a super miniature size (width 1.
For board-to-fpc Narrow Pitch Connectors (0.35mm pitch) S35 Excellent contact reliability and mating in a super miniature size (width 1.7 mm) FEATURES 1. Slim: width 1.7mm 2. Low profile construction:
0.5mm Pitch FPC Connector. FA10 Series
COMPONENTS PRODUCT INFORMATION NEW 0.5mm Pitch FPC Connector FA10 Series CONNECTOR MB-0255-2 April 2016 RoHS Compliant The FA10 Series is a 0.5mm pitch, top and bottom-surface connection type, one-action
Interface Connectors for Miniature, Portable Terminal Devices
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Product Compliant to DIN41612/IEC603-2 Standard
Product ompliant to IN41612/IE603-2 Standard PN Series Pin Header Side Straight through hole type Receptacle Side Straight through hole PN10E- * *P-2.54S PN10E-* *S-2.54S PN10-* *S-2.54S PN10E-* *S-2.54S
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) 2MM FB,ASY,048,SIG,HDR,EN,6.50
1.27mm Pitch Multi-function Two Piece Connector
1.27mm Pitch Multi-function Two Piece Connector FX2 Series Stacking connection (Stack height: 12~16mm) 12mm~16mm Features 1. Various connection with various product line 2. Easy One-Touch Operation Stacking
USB Type-C TM Connector DX07 Series Vertical Plug
COMPONENTS PRODUCT INFORMATION NEW USB Type-C TM Connector DX07 Series Vertical Plug CONNECTOR MB-0332-1 July 2018 RoHS Compliant *Plug will be packaged with protective cap on. Protective Cap The DX07
0.8mm Pitch Stacking Height 5 to 9mm Connector
0.8mm Pitch Stacking Height 5 to 9mm Connector FX6 Series Stacking Height: 5 to 9mm 5~9mm Features 1. Stacking Height 5 to 9mm The board to board stacking height can be set at every millimeter between
B5W-LD0101-1/2 B5W- L D Air Quality Sensor. Highly Sensitive and Compact Air Quality Sensor. Model Number Structure. Ordering Information
Air Quality Sensor Highly Sensitive and Compact Air Quality Sensor Detection of particles down to 0.5 m in diameter is possible while using an LED light source Features a unique flow path structure that
minisd TM Card Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
CARD-EDGE CONNECTORS (AXC)
XC FOR PC OR TO PC OR CR-EGE CONNECTORS (XC) Solder-dip type with flange Solder-dip type without flange FETURES 1. Long insertion and removal life. Thanks to our original contact shape, low insertion force
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
Host Connector for PCMCIA Express Card CONNECTOR. PX10/11 Series
COMPONENTS PRODUCT INFORMATION NEW Host Connector for PCMCIA Express Card CONNECTOR MB-0127 PX10/11 Series June 2005 PX10 Cage PX10 PCB side connector (common) PX11 Cage PX10/11 Series are host connectors
High Density FPC Connector (0.3mm/0.4mm/0.5mm Pitch)
High Density FPC Connector (0.3mm/0.4mm/0.5mm Pitch) FH16 Series FH16 Series Variation 0.3mm pitch 60 contact 0.3mm pitch 80 contact 0.3mm pitch 90 contact 0.4mm pitch 80 contact 0.5mm pitch 50 contact
RX CONNECTOR. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.54mm
RX CONNECOR mm Disconnectable Insulation displacement connectors for.27mm pitch ribbon cables pitch Features Conforms to MIL Standards s RX connectors conform to MIL standards (MIL-C-833) and are compatible
SPECIFICATION FOR APPROVAL INDEX
SPECIFICATION FOR APPROVAL INDEX COVER PAGE INDEX. 0 SCOPE...1 EXPLANATION OF PART NUMBER.1 CIRCUIT DIAGRAM & DIMENSION.....1 SPECIFICATIONS..2 TAPING PACKAGE AND LABEL MARKING...3-4 PRECAUTIONS FOR HANDLING...5-7
onlinecomponents.com
YF53 For FPC/FFC* FPC connectors (0.5mm pitch) Back lock / Series New Low profile and space saving body of 1.0 mm high and mm deep (3.70 mm including the lever) and can have a minimum of four and two contacts
TVH AB1 Engineering Specification
TVH 0402 01 A1 Engineering 1. Scope GENERAL DESCRIPTION TVH 0402 01 A1 is a silicon base in ultra small SMD special packages. It is designed to protect sensitive electronics from damage or latch up due
For board-to-board. Narrow pitch connectors (0.5mm pitch)
For board-to-board Narrow pitch connectors (0.5mm pitch) P5K/ P5K 5.8mm 5.4mm Socket Socket 4.6mm 5.0mm Header Header Note: The external appearance and PC board pattern differs between the P5K and. RoHS
SM CONNECTOR. 1Certified LR R Disconnectable Crimp style wire-to-wire connectors. Features. Specifications. Standards. 2.
Crimp.mm (.") pitch SM CONNECTOR Disconnectable Crimp style wire-to-wire connectors Features High contact pressure With each insertion and withdrawal, the mating contacts wipe against each other to remove
For board-to-board. Narrow pitch connectors (0.5mm pitch)
Discontinued Discontinued as as of of September September 30, 30, 013 013 For board-to-board Narrow pitch connectors (0.5mm pitch) P5KL Series 5.8mm 3.3mm Products are discontinued. FEATURES 1. Low profile
Narrow pitch connectors (0.35mm pitch)
AXT1, 2 For board-to-board For board-to-fpc Narrow pitch connectors (0.35mm pitch) P35S Series FEATURES 1. Small size 0.35 mm pitch contributes to device miniaturization. Smaller compared to P4S series
1.25mm Pitch Miniature Crimping Connector
1.25mm Pitch Miniature Crimping Connector DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight type)
D3SH. List of Models. Surface Mount Switch S H SPST-NO SPST-NC. Long Lever Models. Standard Lever Models
D urface Mount witch The smallest detection switch in the world. Ideal for miniature mobile devices (OMRON's data as of eptember 2007) Ultra small size and ultra low profile contributing to down-sizing
Product Engineering Specification TVH SP0
Part : TVH020101SP0 Version : A1 Page : 1 / 9 SCOPE Product Engineering Specification TVH 0201 01 SP0 TVH 0201 01 SP0 is a TVS diode designed to protect one power/control line or one signal line from overvoltage
PRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 1 SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
INPAQ Global RF/Component Solutions
TVN 0201 01 SP0 Specification Product Name Series Part No Transient Voltage Suppressor TVS Series TVN 0201 01 SP0 Size EIA 0201 TVN 0201 01 SP0 Engineering Specification 1. Scope TVN 0201 01 SP0 is a TVS
Memory Stick Connectors
Memory Stick Connectors CB1 Series Card Push Insert/Push Eject Card ejection distance of 1 mm Mounting height of mm Mounting area: Smaller design is 78% of former size Outline Receptacle
Thin Wire Coaxial Connector for Small Portable Devices CONNECTOR. FI-J Series
COMPONENTS PRODUCT INFORMATION NEW Thin Wire Coaxial Connector for Small Portable Devices CONNECTOR MB-0143-1 FI-J November 2005 Outline Thin wire coaxial connector compatible to AWG #42, 44 cables for
CROWN CLIP Series Sockets
OWN LIP Series Sockets Product Facts ompact design High performance OWN BND contacts urrents to 350 mps 1 Mates with solid or laminated blades Supports true hot-plug (current interruption)2 Float-mount
2688 WESTHILLS COURT, SIMI VALLEY, CA
NEW PRODUCT INTRODUCTION 2688 WESTHILLS COURT, SIMI VALLEY, CA 93065-2635 To: All Hirose Sales Personnel and Partners From: Hirose USA Marketing Dept. Subject: New Product Release for IT11 Series October
TCE0806S Type. Common Mode Filters. Caution. TCE Series. With built-in ESD protection element type. June May 18, Mar.
E M C C o m p o n e n t s June 2017 Common Mode Filters With built-in ESD protection element type TCE Series TCE0806S [0302 inch]* * Dimensions Code JIS[EIA] Caution May 18, 2017 Mar. 29, 2019 Sep. 30,
Solder terminals D2FD-2L0-1H D2FD-01L0-1H. PCB terminals D2FD-2L0-1T D2FD-01L0-1T. Hinge lever Solder terminals D2FD-2L1-1H D2FD-01L1-1H
Ultra subminiature and dust proof Sealing by using rubber packing means the switch can be used in dust-proof environments (IEC IP6X). Switch rating of 2 A at 125 VAC possible with a single-leaf movable
RTE02 and RTE03 Miniature Rotary Switches
RTE02 and RTE03 Miniature Rotary Switches RTE02 and RTE03 are two types of a subminiature rotary changeover switch to be mounted on PC boards. PC pins are in a 2.54 mm (0.100) grid. RTE02 with 2 positions
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION DESCRIPTION DRAWN Y DESIGNED Y CHECKED Y APPROVED Y TVL 0201 01 SP0 Sandy Aaron Aaron YuChiaChang TVL 0201 01 SP0 Engineering 1. Scope TVL 0201 01 SP0 is a TVS diode designed to protect
SD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion
D2F. Ultra Subminiature Basic Switch with plenty of terminal variations. Model Number Legend. Ultra Subminiature Basic Switch
Ultra Subminiature Basic Switch with plenty of terminal variations Incorporating a snapping mechanism made with two highly precise split springs that ensures long durability. Using insertion molded terminals
A35P ORDERING INFORMATION. Narrow pitch connectors (0.35mm pitch) RoHS compliant. Rated current
High current type For board-to-fpc Narrow pitch connectors (0.35mm pitch) A35P Rated current Number of power contacts Max. 4 pins Max. 8 pins Rated current Power contact Signal contact Total 1.5 A/pin
1.27mm Pitch Multi-function Two Piece Connector
1.27mm Pitch Multi-function Two Piece Connector FX2 Series Stacking connection (Stack height: 12~16mm) 12mm~16mm Horizontal Connection Vertical Connection 25mm Features 1. Various connection with various
9mm Size Metal Shaft Snap-in Type
Potentiometer 9mm Size Snap-in Type RK09L Series Single-unit and dual-unit types suit a variety of controls. Typical Specifications Items Total tolerance Maximum operating voltage Total rotational angle
Operating Force. Snap action/push-on type SPST. 10 ms max. (ON, OFF) 1.0 N, 1.6 N, 2.4 N, 3.5 N, 5.0 N, 7.0 N 0.15 mm±0.1 mm
3.5 mm 2.9 mm SMD Light Touch Switches Type: Features External dimensions : 3.5 mm 2.9 mm, Height 1.7 mm High operating force available (Operatingforce:7.0Nmax.) Optional ground terminal Recommended Applications
Technical data: Pin Spacing
282 Female Connectors, Double-Row Pin Spacing: 3.5 mm Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross sections up to 1.5 mm 2 High-density,
Narrow pitch connectors (0.4mm pitch)
AXT5, 6 For board-to-fpc Narrow pitch connectors (0.4mm pitch) F4S Series FEATURES 1. Space-saving (3.6 mm widthwise) Smaller compared to F4 series (40 pin contacts): 27% smaller, 38% smaller 3. Simple
Connector with mm square contacts DIC- 131 DIC- DIC- 129 DIC- 128A DIC- 129A AC 500V AC 1000V. 20 milliohms or less
mm Pitch Connectors DIC series mm Pitch Connectors Outline The DIC series provides various connectors for switching between circuits on PCB in combination with various male connectors, for various-pattern
Interface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Overview The ST Series interface connectors are specifically designed for use as Input/Output (I/O) connectors on portable information devices.
Meet requirements of USB 2.0
NEW Meet requirements of USB.0 UX Series Features 1. Certified to perform as required in USB.0 Standard Tested and certified by USB Association approved laboratory the connectors will perform at transmission