Simulator for 68K/ColdFire

Transcription

1 Simulator for 68K/ColdFire TRACE32 Online Help TRACE32 Directory TRACE32 Index TRACE32 Documents... TRACE32 Instruction Set Simulators... Simulator for 68K/ColdFire... 1 TRACE32 Simulator License... 4 Quick Start of the Simulator... 5 Peripheral Simulation... 7 Troubleshooting... 8 FAQ 8 68K and HC16 specific Implementations... 9 Memory Classes 9 68K and HC16 specific SYStem Commands SYStem.CONFIG Configure debugger according to target topology 10 SYStem.CPU Select CPU type 10 SYStem.CpuAccess Run-time memory access (intrusive) 10 SYStem.LOCK Lock and tristate the debug port 11 SYStem.MemAccess Real-time memory access (non-intrusive) 11 SYStem.Mode Establish the communication with the simulator 12 SYStem.Option BASE Select peripheral base address 12 SYStem.Option MMUSPACES Separate address spaces by space IDs 13 SYStem.RESetOut CPU reset command for 68K simulator 14 SYStem.RESetOut CPU reset command 14 CPU specific MMU Commands MMU.DUMP Page wise display of MMU translation table 15 MMU.List Compact display of MMU translation table 17 MMU.SCAN Load MMU table from CPU 18 Support Available Tools 19 Compilers 23 Compilers 68K 23 Compilers ColdFIre 25 Compilers HC16 25 Target Operating Systems 68K 26 Simulator for 68K/ColdFire 1

2 Target Operating Systems ColdFire 26 3rd-Party Tool Integrations 68K 27 3rd-Party Tool Integrations ColdFire 28 Products Product Information 29 Order Information 30 Simulator for 68K/ColdFire 2

3 Simulator for 68K/ColdFire Version 14-Nov-2018 All general commands are described in the PowerView Command Reference (ide_ref.pdf) and General Commands Reference. Simulator for 68K/ColdFire 3

4 TRACE32 Simulator License [build DVD 02/2016] The extensive use of the TRACE32 Instruction Set Simulator requires a TRACE32 Simulator License. For more information, see Simulator for 68K/ColdFire 4

5 Quick Start of the Simulator To start the simulator, proceed as follows: 1. Select the device prompt for the ICD Debugger and reset the system. B:: RESet The device prompt B:: is normally already selected in the command line. If this is not the case, enter B:: to set the correct device prompt. The RESet command is only necessary if you do not start directly after booting TRACE Specify the CPU specific settings. SYStem.CPU <cpu_name> The default values of all other options are set in such a way that it should be possible to work without modification. Please consider that this is probably not the best configuration for your target. Simulator for 68K/ColdFire 5

6 3. Enter debug mode. SYStem.Up This command resets the CPU and enters debug mode. After this command is executed it is possible to access memory and registers. 4. Load the program. Data.LOAD.<format> <filename> ; load program and symbols See the Data.LOAD command reference for a list of supported file formats. If uncertain about the required format, try Data.LOAD.auto. A detailed description of the Data.LOAD command and all available options is given in the reference guide. 5. Start-up example A typical start sequence is shown below. This sequence can be written to a PRACTICE script file (*.cmm, ASCII file format) and executed with the command DO <filename>. B:: WinCLEAR SYStem.CPU <cpu_name> SYStem.Up Data.LOAD.<format> <filename> Register.Set pc main PER.view ; Select the ICD device prompt ; Clear all windows ; Select CPU type ; Reset the target and enter ; debug mode ; Load the application ; Set the PC to function main ; Show clearly arranged peripherals ; in window *) Data.List ; Open source code window *) Register /SpotLight ; Open register window *) Frame.view /Locals /Caller Var.Watch %Spotlight flags ast ; Open the stack frame with ; local variables *) ; Open watch window for ; variables *) *) These commands open windows on the screen. The window position can be specified with the WinPOS command. Simulator for 68K/ColdFire 6

7 Peripheral Simulation For more information, see API for TRACE32 Instruction Set Simulator (simulator_api.pdf). Simulator for 68K/ColdFire 7

8 Troubleshooting No information available. FAQ No information available Simulator for 68K/ColdFire 8

9 68K and HC16 specific Implementations Memory Classes Memory Class Description FC0 Function-Code 0 FC1 USER-DATA UD USER-DATA FC2 USER-PROGRAM UP USER-PROGRAM FC3 Function-Code 3 FC4 Function-Code 4 FC5 SUPERVISOR-DATA SD SUPERVISOR-DATA FC6 SUPERVISOR-PROGRAM SP SUPERVISOR-PROGRAM FC7 Function-Code 7 CPU CPU Function-Code U S D P User Supervisor Data Program C E Memory access by CPU Emulation memory access Simulator for 68K/ColdFire 9

10 68K and HC16 specific SYStem Commands SYStem.CONFIG Configure debugger according to target topology The SYStem.CONFIG commands have no effect on the simulator. They are only provided to allow the user to run PRACTICE scripts written for the debugger within the simulator without modifications. SYStem.CPU Select CPU type Format: SYStem.CPU <mode> <mode>: LC302 PM302 EN Selects the processor type. NOTE: ROM debuggers require also a modification in the debug monitor for different processor types. SYStem.CpuAccess Run-time memory access (intrusive) Format: SYStem.CpuAccess Enable Denied Nonstop Default: Denied. Enable Allow intrusive run-time memory access. Since a non-intrusive run-time memory access (SYStem.MemoryAccess CPU) is available for all TRACE32 instruction set simulators, there is no need for an intrusive run-time memory access. Simulator for 68K/ColdFire 10

11 Denied Nonstop Lock intrusive run-time memory access. Lock all features of the debugger that affect the run-time behavior. Nonstop reduces the functionality of the debugger to: run-time access to memory and variables trace display The debugger inhibits the following: to stop the program execution all features of the debugger that are intrusive (e.g. action Spot for breakpoints, performance analysis via StopAndGo mode, conditional breakpoints etc.) SYStem.LOCK Lock and tristate the debug port Format: SYStem.LOCK [ON OFF] Default: OFF. If the system is locked, no access to the debug port will be performed by the debugger. While locked, the debug connector of the debugger is tristated. The main intention of the lock command is to give debug access to another tool. The command has no effect for the simulator. SYStem.MemAccess Real-time memory access (non-intrusive). Format: SYStem.MemAccess CPU Denied <cpu_specific> SYStem.ACCESS (deprecated) CPU Denied (default) Real-time memory access during program execution to target is enabled. Real-time memory access during program execution to target is disabled. Simulator for 68K/ColdFire 11

12 SYStem.Mode Establish the communication with the simulator Format: SYStem.Mode <mode> <mode>: Down NoDebug Go Up Default: Down. Selects the target operating mode. Down NoDebug Go Up The CPU is in reset. Debug mode is not active. Default state and state after fatal errors. The CPU is running. Debug mode is not active. Debug port is tristate. In this mode the target should behave as if the debugger is not connected. The CPU is running. Debug mode is active. After this command the CPU can be stopped with the break command or if any break condition occurs. The CPU is not in reset but halted. Debug mode is active. In this mode the CPU can be started and stopped. This is the most typical way to activate debugging. If the mode Go is selected, this mode will be entered, but the control button in the SYStem.state window jumps to the mode Up. SYStem.Option BASE Select peripheral base address Format: SYStem.Option BASE <address> Defines the base address of the internal IO of some 683xx processors. This should be set to the value used by the target system. Simulator for 68K/ColdFire 12

13 SYStem.Option MMUSPACES Separate address spaces by space IDs Format: SYStem.Option MMUSPACES [ON OFF] SYStem.Option MMUspaces [ON OFF] (deprecated) SYStem.Option MMU [ON OFF] (deprecated) Default: OFF. Enables the use of space IDs for logical addresses to support multiple address spaces. For an explanation of the TRACE32 concept of address spaces (zone spaces, MMU spaces, and machine spaces), see TRACE32 Glossary (glossary.pdf). NOTE: SYStem.Option MMUSPACES should not be used if only one translation table is used on the target. If a debug session requires space IDs, you must observe the following sequence of steps: 1. Activate SYStem.Option MMUSPACES. 2. Load the symbols with Data.LOAD. Otherwise, the internal symbol database of TRACE32 may become inconsistent. Examples: ;Dump logical address 0xC00208A belonging to memory space with ;space ID 0x012A: Data.dump D:0x012A:0xC00208A ;Dump logical address 0xC00208A belonging to memory space with ;space ID 0x0203: Data.dump D:0x0203:0xC00208A Simulator for 68K/ColdFire 13

14 SYStem.RESetOut CPU reset command for 68K simulator Format: SYStem.RESetOut Special reset command for 68Ksimulator. SYStem.RESetOut CPU reset command The command asserts nreset on the JTAG connector in the TRACE32 In-Circuit Debugger (ICD) but is ignored by the TRACE32 Instruction Set Simulator. However, the command is allowed in the simulator so that you can run scripts which have actually been made for the debugger. For more information about the effect in the debugger, refer to your Processor Architecture Manual (debugger_<arch>.pdf). Simulator for 68K/ColdFire 14

15 CPU specific MMU Commands MMU.DUMP Page wise display of MMU translation table Format: MMU.DUMP <table> [<range> <addr> <range> <root> <addr> <root>] MMU.<table>.dump (deprecated) <table>: PageTable KernelPageTable TaskPageTable <task_magic> <task_id> <task_name> <space_id>:0x0 <cpu_specific_tables> Displays the contents of the CPU specific MMU translation table. If called without parameters, the complete table will be displayed. If the command is called with either an address range or an explicit address, table entries will only be displayed, if their logical address matches with the given parameter. <root> PageTable KernelPageTable TaskPageTable <task_magic> <task_id> <task_name> <space_id>:0x0 The <root> argument can be used to specify a page table base address deviating from the default page table base address. This allows to display a page table located anywhere in memory. Displays the current MMU translation table entries of the CPU. This command reads all tables the CPU currently uses for MMU translation and displays the table entries. Displays the MMU translation table of the kernel. If specified with the MMU.FORMAT command, this command reads the MMU translation table of the kernel and displays its table entries. Displays the MMU translation table entries of the given process. Specify one of the TaskPageTable arguments to choose the process you want. In MMU-based operating systems, each process uses its own MMU translation table. This command reads the table of the specified process, and displays its table entries. For information about the first three parameters, see What to know about Task Magic Numbers, Task IDs and Task Names (general_ref_t.pdf). See also the appropriate OS Awareness Manuals. Simulator for 68K/ColdFire 15

16 CPU specific Tables in MMU.DUMP <table> ITLB DTLB Displays the contents of the Instruction Translation Lookaside Buffer. Displays the contents of the Data Translation Lookaside Buffer. Simulator for 68K/ColdFire 16

17 MMU.List Compact display of MMU translation table Format: MMU.List <table> [<range> <addr> <range> <root> <addr> <root>] MMU.<table>.List (deprecated) <table>: PageTable KernelPageTable TaskPageTable <task_magic> <task_id> <task_name> <space_id>:0x0 Lists the address translation of the CPU-specific MMU table. If called without address or range parameters, the complete table will be displayed. If called without a table specifier, this command shows the debugger-internal translation table. See TRANSlation.List. If the command is called with either an address range or an explicit address, table entries will only be displayed, if their logical address matches with the given parameter. <root> PageTable KernelPageTable TaskPageTable <task_magic> <task_id> <task_name> <space_id>:0x0 The <root> argument can be used to specify a page table base address deviating from the default page table base address. This allows to display a page table located anywhere in memory. Lists the current MMU translation of the CPU. This command reads all tables the CPU currently uses for MMU translation and lists the address translation. Lists the MMU translation table of the kernel. If specified with the MMU.FORMAT command, this command reads the MMU translation table of the kernel and lists its address translation. Lists the MMU translation of the given process. Specify one of the TaskPageTable arguments to choose the process you want. In MMU-based operating systems, each process uses its own MMU translation table. This command reads the table of the specified process, and lists its address translation. For information about the first three parameters, see What to know about Task Magic Numbers, Task IDs and Task Names (general_ref_t.pdf). See also the appropriate OS Awareness Manuals. Simulator for 68K/ColdFire 17

18 MMU.SCAN Load MMU table from CPU Format: MMU.SCAN <table> [<range> <address>] MMU.<table>.SCAN (deprecated) <table>: PageTable KernelPageTable TaskPageTable <task_magic> <task_id> <task_name> <space_id>:0x0 ALL <cpu_specific_tables> Loads the CPU-specific MMU translation table from the CPU to the debugger-internal static translation table. If called without parameters, the complete page table will be loaded. The list of static address translations can be viewed with TRANSlation.List. If the command is called with either an address range or an explicit address, page table entries will only be loaded if their logical address matches with the given parameter. Use this command to make the translation information available for the debugger even when the program execution is running and the debugger has no access to the page tables and TLBs. This is required for the real-time memory access. Use the command TRANSlation.ON to enable the debugger-internal MMU table. PageTable KernelPageTable TaskPageTable <task_magic> <task_id> <task_name> <space_id>:0x0 ALL Loads the current MMU address translation of the CPU. This command reads all tables the CPU currently uses for MMU translation, and copies the address translation into the debugger-internal static translation table. Loads the MMU translation table of the kernel. If specified with the MMU.FORMAT command, this command reads the table of the kernel and copies its address translation into the debugger-internal static translation table. Loads the MMU address translation of the given process. Specify one of the TaskPageTable arguments to choose the process you want. In MMU-based operating systems, each process uses its own MMU translation table. This command reads the table of the specified process, and copies its address translation into the debugger-internal static translation table. For information about the first three parameters, see What to know about Task Magic Numbers, Task IDs and Task Names (general_ref_t.pdf). See also the appropriate OS Awareness Manual. Loads all known MMU address translations. This command reads the OS kernel MMU table and the MMU tables of all processes and copies the complete address translation into the debuggerinternal static translation table. See also the appropriate OS Awareness Manual. Simulator for 68K/ColdFire 18

19 Support Available Tools CPU ICE FIRE ICD DEBUG ICD MONITOR ICD TRACE POWER INTEGRATOR INSTRUCTION SIMULATOR 90CE201 YES YES YES 90CL301 YES YES YES 90CL302 YES YES YES 90CL303 YES YES YES 93C100 YES YES YES 93C101 YES YES YES 93C110 YES YES YES CFV1CORE_ALTERA YES YES KELVIN YES YES MC68000 YES YES YES MC68008 YES YES YES MC68010 YES YES YES MC68020 YES YES YES MC68030 YES YES YES MC68040 YES YES YES MC68040V YES YES YES MC68060 YES YES YES MC68302 YES YES YES MC68306 YES YES YES MC68307 YES YES YES MC68308 YES YES YES MC68328 YES YES YES MC68330 YES YES YES YES MC68331 YES YES YES YES MC68332 YES YES YES YES MC68334 YES YES YES YES MC68336 YES YES YES YES MC68338 YES YES YES YES MC68340 YES YES YES YES MC68341 YES YES YES YES MC68349 YES YES YES YES MC68360 YES YES YES YES MC68376 YES YES YES YES MC68EC000 YES YES YES Simulator for 68K/ColdFire 19

20 CPU MC68EC020 YES YES YES MC68EC030 YES YES YES MC68EC040 YES YES YES MC68EC040V YES YES YES MC68EC060 YES YES YES MC68EN302 YES YES YES MC68EN360 YES YES YES YES MC68F333 YES YES YES YES MC68HC000 YES YES YES MC68HC001 YES YES YES MC68HC008 YES YES YES MC68HC010 YES YES YES MC68LC040 YES YES YES MC68LC060 YES YES YES MC68LC302 YES YES YES MC68LC302_3.3V YES YES YES MC68MH360 YES YES YES YES MC68PM302 YES YES YES MC68PM302_3.3V YES YES YES MC68SEC000 YES YES YES MCF51AC YES YES MCF51AG YES YES MCF51CN YES YES MCF51EM YES YES MCF51JE YES YES MCF51JF YES YES MCF51JG YES YES MCF51JM YES YES MCF51JU YES YES MCF51MM YES YES MCF51QE YES YES MCF51QM YES YES MCF51QU YES YES MCF51QW YES YES MCF5202 YES YES YES MCF5203 YES YES YES MCF5204 YES YES YES MCF5206 YES YES YES MCF5206E YES YES YES MCF5207 YES YES YES MCF5208 YES YES YES Simulator for 68K/ColdFire 20 ICE FIRE ICD DEBUG ICD MONITOR ICD TRACE POWER INTEGRATOR INSTRUCTION SIMULATOR

21 CPU MCF52100 YES YES YES MCF5211 YES YES YES MCF52110 YES YES YES MCF5212 YES YES YES MCF5213 YES YES YES MCF5214 YES YES YES MCF5216 YES YES YES MCF52210 YES YES YES MCF52211 YES YES YES MCF52212 YES YES YES MCF52213 YES YES YES MCF52221 YES YES YES MCF52223 YES YES YES MCF52230 YES YES YES MCF52231 YES YES YES MCF52232 YES YES YES MCF52233 YES YES YES MCF52234 YES YES YES MCF52235 YES YES YES MCF52236 YES YES YES MCF52252 YES YES MCF52254 YES YES MCF52255 YES YES MCF52256 YES YES YES MCF52258 YES YES YES MCF52259 YES YES YES MCF52274 YES YES YES MCF52277 YES YES YES MCF5232 YES YES YES MCF5233 YES YES YES MCF5234 YES YES YES MCF5235 YES YES YES MCF5249 YES YES YES MCF5249L YES YES YES MCF5270 YES YES YES MCF5271 YES YES YES MCF5272 YES YES YES MCF5274 YES YES YES MCF5274L YES YES YES MCF5275 YES YES YES MCF5275L YES YES YES Simulator for 68K/ColdFire 21 ICE FIRE ICD DEBUG ICD MONITOR ICD TRACE POWER INTEGRATOR INSTRUCTION SIMULATOR

22 CPU MCF5280 YES YES YES MCF5281 YES YES YES MCF5282 YES YES YES MCF53010 YES YES YES MCF53011 YES YES YES MCF53012 YES YES YES MCF53013 YES YES YES MCF53014 YES YES YES MCF53015 YES YES YES MCF53016 YES YES YES MCF53017 YES YES YES MCF5307 YES YES YES MCF5307A YES YES YES MCF5307B YES YES YES MCF5327 YES YES YES MCF5328 YES YES YES MCF5329 YES YES YES MCF5372 YES YES YES MCF5372L YES YES YES MCF5373 YES YES YES MCF5373L YES YES YES MCF5407 YES YES YES MCF54410 YES YES YES MCF54415 YES YES YES MCF54416 YES YES YES MCF54417 YES YES YES MCF54418 YES YES YES MCF54450 YES YES YES MCF54451 YES YES YES MCF54452 YES YES YES MCF54453 YES YES YES MCF54454 YES YES YES MCF54455 YES YES YES MCF5470 YES YES YES MCF5471 YES YES YES MCF5472 YES YES YES MCF5473 YES YES YES MCF5474 YES YES YES MCF5475 YES YES YES MCF5480 YES YES YES MCF5481 YES YES YES Simulator for 68K/ColdFire 22 ICE FIRE ICD DEBUG ICD MONITOR ICD TRACE POWER INTEGRATOR INSTRUCTION SIMULATOR

23 CPU MCF5482 YES YES YES MCF5483 YES YES YES MCF5484 YES YES YES MCF5485 YES YES YES SCC68070 YES YES YES TMP68301 YES YES YES TMP68303 YES YES YES ICE FIRE ICD DEBUG ICD MONITOR ICD TRACE POWER INTEGRATOR INSTRUCTION SIMULATOR Compilers Compilers 68K Language Compiler Company Option Comment ADA ALSYS-ADA IEEE limited support (IEEE) ADA TELESOFT-ADA Telesoft IEEE limited support (IEEE) ASM RTOS IEP GmbH SYM/LOC Source level debugging ASM ASM68K Mentor Graphics Corporation IEEE Source level debugging ASM VERSADOS-ASM NXP Semiconductors VERSADOS symbols only ASM OS-9-ASSEMBLER Radisys Inc. ROF Source level debugging ASM AS68 TASKING IEEE C HP C HP no type/locals info C ORGANON CAD-UL BOUND ElectronicServices GmbH C C68K Cosmic Software COSMIC C GNU-C Free Software ELF/DWARF Foundation, Inc. C GNU-C Free Software COFF Foundation, Inc. C GNU-C Free Software Foundation, Inc. ELF/DWARF Simulator for 68K/ColdFire 23

24 Language Compiler Company Option Comment C GREEN-HILLS-C Greenhills Software Inc. COFF C ICC68K Introl Corporation ICOFF C MCC Mentor Graphics IEEE Corporation C HT-68K Microchip Technology HITECH Inc. C HICROSS-68K NXP Semiconductors HICROSS C CC68K NXP Semiconductors COFF C ULTRA-C Radisys Inc. ROF OS/9 compilers C OS/9-C Radisys Inc. ROF C CROSSCODE-C SDSI SDS C SCC68K Sierra COFF C SUN3-CC Oracle Corporation DBX C ICC68K TASKING COFF C ICC68K TASKING IEEE C TT-68K TASKING IEEE C TCC68K TASKING AOUT only source and syms C TEKTRONIX-C Tektronix COMFOR C D-CC Wind River Systems IEEE C D-CC Wind River Systems ELF/DWARF C++ ORGANON-C++ CAD-UL BOUND ElectronicServices GmbH C++ GNU-C++ Free Software DBX Foundation, Inc. C++ GNU-C++ Free Software ELF/DWARF Foundation, Inc. C++ CCC68K Mentor Graphics IEEE Corporation C++ HICROSS-68K NXP Semiconductors HICROSS C++ CODEWARRIOR NXP Semiconductors ELF/DWARF C++ CROSSCODE-C++ SDSI SDS C++ D-C++ Wind River Systems ELF/DWARF MODULA MOD68K Introl Corporation ICOFF MODULA MCS2 Multichannelsystems COFF GmbH MODULA MCDS NXP Semiconductors MCDS PASCAL MPC Mentor Graphics IEEE Corporation PEARL RTOS IEP GmbH SYM/LOC no type/locals info Simulator for 68K/ColdFire 24

25 Compilers ColdFIre Language Compiler Company Option Comment C GREENHILLS-C Greenhills Software Inc. COFF C++ GNU-C Free Software ELF/DWARF Foundation, Inc. C++ MCC Mentor Graphics IEEE Corporation C++ CODEWARRIOR NXP Semiconductors ELF/DWARF C++ DCC Wind River Systems ELF/DWARF C/C++ ICC68K TASKING IEEE Compilers HC16 Language Compiler Company Option Comment C CX68HC16 Cosmic Software COSMIC C ICC6816 IAR Systems AB UBROF C ICC68HC16 Introl Corporation ICOFF C HICROSS-68HC16 NXP Semiconductors HICROSS Simulator for 68K/ColdFire 25

26 Target Operating Systems 68K Company Product Comment Atego Ldt. AdaWorld ARTK KadakProducts Ltd. AMX Oracle Corporation ChorusOS CMX Systems Inc. CMX-RTX Synopsys, Inc MQX 2.40 and 2.50, 3.6 MTOS-UX Mentor Graphics Nucleus PLUS Corporation Radisys Inc. OS-9 Enea OSE Systems OSE Classic (OS68) Enea OSE Systems OSE Delta 4.x and 5.x RealTime Craft (XEC68k) Quadros Systems Inc. RTXC 3.2 IBM Corp. SDT-Cmicro - uclinux Kernel Version 2.4 and 2.6, 3.x Mentor Graphics VRTX32 Corporation Mentor Graphics VRTXmc Corporation Mentor Graphics VRTXsa Corporation Wind River Systems VxWorks 5.x and 6.x Target Operating Systems ColdFire Company Product Comment ecoscentric Limited ECOS 1.3, 2.0 and Linux Kernel Version 2.4 and 2.6, 3.x, 4.x NXP Semiconductors MQX 3.x and 4.x Mentor Graphics Nucleus PLUS Corporation - OSEK via ORTI Elektrobit Automotive ProOSEK via ORTI GmbH RTEMS RTEMS up to v5 Quadros Systems Inc. RTXC Quadros Simulator for 68K/ColdFire 26

27 Company Product Comment Sciopta Sciopta Micro Digital Inc. SMX 3.4 to 4.3 Express Logic Inc. ThreadX 3.0, 4.0, 5.0 Micrium Inc. uc/os-ii 2.0 to uclinux Kernel Version 2.4 and 2.6, 3.x, 4.x 3rd-Party Tool Integrations 68K CPU Tool Company Host WINDOWS CE PLATF. - Windows BUILDER CODE::BLOCKS - - C++TEST - Windows ADENEO - X-TOOLS / X32 blue river software GmbH Windows CODEWRIGHT Borland Software Windows Corporation CODE CONFIDENCE Code Confidence Ltd Windows TOOLS CODE CONFIDENCE Code Confidence Ltd Linux TOOLS EASYCODE EASYCODE GmbH Windows ECLIPSE Eclipse Foundation, Inc Windows CHRONVIEW Inchron GmbH Windows LDRA TOOL SUITE LDRA Technology, Inc. Windows UML DEBUGGER LieberLieber Software Windows GmbH SIMULINK The MathWorks Inc. Windows ATTOL TOOLS MicroMax Inc. Windows VISUAL BASIC Microsoft Corporation Windows INTERFACE LABVIEW NATIONAL Windows INSTRUMENTS Corporation TPT PikeTec GmbH Windows CANTATA QA Systems Ltd Windows RAPITIME Rapita Systems Ltd. Windows RHAPSODY IN MICROC IBM Corp. Windows RHAPSODY IN C++ IBM Corp. Windows DA-C RistanCASE Windows TRACEANALYZER Symtavision GmbH Windows Simulator for 68K/ColdFire 27

28 CPU Tool Company Host ECU-TEST TraceTronic GmbH Windows UNDODB Undo Software Linux TA INSPECTOR Vector Windows VECTORCAST UNIT Vector Software Windows TESTING VECTORCAST CODE Vector Software Windows COVERAGE 68K OS68 DEBUGGER Enea OSE Systems - 68K SDT CMICRO IBM Corp. Windows 68K DIAB RTA SUITE Wind River Systems Windows 3rd-Party Tool Integrations ColdFire CPU Tool Company Host WINDOWS CE PLATF. - Windows BUILDER CODE::BLOCKS - - C++TEST - Windows ADENEO - X-TOOLS / X32 blue river software GmbH Windows CODEWRIGHT Borland Software Windows Corporation CODE CONFIDENCE Code Confidence Ltd Windows TOOLS CODE CONFIDENCE Code Confidence Ltd Linux TOOLS EASYCODE EASYCODE GmbH Windows ECLIPSE Eclipse Foundation, Inc Windows CHRONVIEW Inchron GmbH Windows LDRA TOOL SUITE LDRA Technology, Inc. Windows UML DEBUGGER LieberLieber Software Windows GmbH SIMULINK The MathWorks Inc. Windows ATTOL TOOLS MicroMax Inc. Windows VISUAL BASIC Microsoft Corporation Windows INTERFACE LABVIEW NATIONAL Windows INSTRUMENTS Corporation TPT PikeTec GmbH Windows CANTATA QA Systems Ltd Windows RAPITIME Rapita Systems Ltd. Windows Simulator for 68K/ColdFire 28

29 CPU Tool Company Host RHAPSODY IN MICROC IBM Corp. Windows RHAPSODY IN C++ IBM Corp. Windows DA-C RistanCASE Windows TRACEANALYZER Symtavision GmbH Windows ECU-TEST TraceTronic GmbH Windows UNDODB Undo Software Linux TA INSPECTOR Vector Windows VECTORCAST UNIT Vector Software Windows TESTING VECTORCAST CODE Vector Software Windows COVERAGE COLDFIRE DIAB RTA SUITE Wind River Systems Windows Products Product Information OrderNo Code LA-2812L SIMULATOR-68K-FL Text 1 User Float. Lic. TRACE32 68K Simulator Floating license to use the TRACE32 Instruction Set Simulator for automated tests via script language PRACTICE or via the TRACE32 Remote API supports 68k and ColdFire for Windows32, Windows64, Linux32, Linux64 and Solaris, other platforms on request floating license via RLM (Reprise License Manager) Please add the RLM HostID of the license server to your order (please see our FAQ) OrderNo Code LA-8807 SIM-16 Text TRACE32 Instruction Set Simulator for 68HC16 TRACE32 Instruction Set Simulator Simulator for 68K/ColdFire 29

30 Order Information Order No. Code Text LA-2812L SIMULATOR-68K-FL 1 User Float. Lic. TRACE32 68K Simulator Order No. Code Text LA-8807 SIM-16 TRACE32 Instruction Set Simulator for 68HC16 Simulator for 68K/ColdFire 30