IBM DB2 and IMS Tools for z/os improve system usability and productivity

Transcription

1 Software Announcement December 2, 2003 IBM DB2 and IMS Tools for z/os improve system usability and productivity Overview Two new and nine enhanced versions of DB2 and IMS Tools offer many innovative features to assist database administrators (DBAs) and system programmers in managing all aspects of DB2 and IMS database environments. New DB2 Information Integrator Classic Federation for z/os, V8 IMS Performance Monitor for z/os Enhanced DB2 Buffer Pool Analyzer for DB2 Change Accumulation Tool for z/os, V1.3 DB2 Log Analysis Tool for DB2 Object Restore for DB2 Performance Expert for DB2 Performance Monitor for z/os, V8 DB2 Test Database Generator for IMS Extended Terminal Option Support for z/os, V3 IMS High Performance Image Copy for z/os, V3 New product names The names of two products and their associated subscription and support licenses have been changed to better reflect their enhanced capabilities. Refer to DB2 Test Database Generator for z/os and IBM IMS High Performance Image Copy for z/os in the Description section for details. The DB2 and IMS Tools business is a unique model in the industry. IBM continues to increase its investment in tools to deliver comprehensive solutions that meet requirements faster than ever before. Increased focus is on common interfaces, cross-tool integration, and testing with the same criteria used for the databases. Key prerequisites Any hardware configuration that supports the required versions of DB2 and IMS. Details are listed in the Hardware requirements and Software requirements sections. Planned availability dates December 5, 2003 DB2 Buffer Pool Analyzer for DB2 Change Accumulation Tool for z/os, V1.3 DB2 Information Integrator Classic Federation for z/os, V8 DB2 Performance Expert for DB2 Performance Monitor for z/os, V8 DB2 Test Database Generator for IMS Extended Terminal Option Support for z/os, V3 IMS High Performance Image Copy for z/os, V3 IMS Performance Monitor for z/os December 19, 2003 DB2 Log Analysis Tool for DB2 Object Restore for At a glance Two new and nine enhanced versions of DB2 and IMS Tools offer capabilities in key functional areas: Application Management DB2 Information Integrator Classic Federation for z/os, V8 DB2 Test Database Generator for Performance Management DB2 Buffer Pool Analyzer for DB2 Performance Expert for DB2 Performance Monitor for z/os, V8 IMS Performance Monitor for z/os Recovery Management DB2 Change Accumulation Tool for z/os, V1.3 DB2 Log Analysis Tool for DB2 Object Restore for IMS High Performance Image Copy for z/os, V3 TM Management IMS Extended Terminal Option Support for z/os, V3 For ordering, contact: Your IBM representative, an IBM Business Partner, or the Americas Call Centers at 800-IBM-CALL Reference: LE001 This announcement is provided for your information only. For additional information, contact your IBM representative, call 800-IBM-4YOU, or visit the IBM home page at: IBM United States IBM is a registered trademark of International Business Machines Corporation

2 Description IBM first announced its entry into the database tools business in September 2000, delivering a set of 34 tools for DB2 and IMS covering key system management functions, and committing to expand this portfolio in response to customer requirements. This offering marks IBM s tenth database tools announcement in three years, proof of our ability to offer a broad range of tools that support DB2 and IMS databases and to provide that support with rapid availability for each new version or release of the databases. To view the complete list of DB2 and IMS Tools announcements visit: db2imstools/announce.html IBM now offers more than 60 tools that feature common interfaces and cross-tool integration, tested under the same configurations and workloads as the databases they support. As we enter the era of autonomic computing, DB2 and IMS Tools will become increasingly self-managed in terms of dynamically monitoring and managing data, and taking responsibility for decision making and initiating action. To view the list of DB2 and IMS Tools, visit: New product names The names of the following products have been changed to better reflect their enhanced capabilities or the products for which they provide subscription and support. New name Old name DB2 Test Database Generator DB2 Data Export Facility for (5697-I02) for z/os (5655-E46) S&S for DB2 Test Database DB2 Data Export Facility Generator for z/os and all for z/os Subscription prior versions (5655-E47) and Support (5655-E47) IBM IMS High Performance IBM IMS Image Copy Image Copy for z/os, V3 Extensions for (5655-K96) (5655-J56) S&S for IBM IMS High IBM IMS Image Copy Performance Image Copy for Extensions for z/os z/os and all prior versions Subscription and (5655-E20) Support (5655-E20) IBM Tools for Application Management DB2 Information Integrator Classic Federation for z/os, V8 (5697-I82) provides direct SQL SELECT, INSERT, UPDATE, and DELETE access to mainframe non-relational and relational databases and files with transactional speed and enterprise scale without mainframe programming. Using DB2 Information Integrator Classic Federation applications can issue SQL SELECT, INSERT, UPDATE, and DELETE from ODBC, JDBC, or a Call Level Interface (CLI) to access DB2 UDB, IMS, and VSAM mainframe data. Three optional features are available to provide these services for Software AG Adabas as well as Computer Associates CA-Datacom and CA-IDMS data. Additional information is provided in the Supplemental Information section. DB2 Test Database Generator for (5697-I02) allows you to create test data for databases. You can specify database tables or text files that can be used to supply seed data for test data creation. Sets of generation rules or actions are defined that are applied to the source data when the test data is generated. Test data can also be created from scratch using these generation rules. Generation rules specify how the data will be changed in order to make seed data non-sensitive or how the data will be created from scratch so that it mimics real data. DB2 Test Database Generator can access DB2 database locations on z/os, AIX, Solaris, and Microsoft Windows platforms. A table grouping component called DB2 Grouper is also provided that discovers relationships between tables from definitional as well as access sources, making it easy to view related tables in the test environment for inclusion. The name of Version 1 of this product was DB2 Data Export Facility for z/os. The name of the product was changed to better describe the capabilities of the new version. Additional information is provided in the Supplemental Information section. IBM Tools for Performance Management DB2 Performance Expert for (5655-J49) is the ultimate tool to help you get optimum performance from your database management system. It provides support for resolving critical performance issues and may be integrated with the DB2 Tools Launchpad on ISPF and DB2 Control Center for the workstation GUI. Support provided includes monitoring, reporting, performance warehousing of your Performance Expert database, buffer pool analysis, and explain functions to determine the access paths of SQL statements. The new capabilities and functions in Version 2 are described in the Supplemental Information section. DB2 Buffer Pool Analyzer for (5697-H82) contains all the buffer pool analysis and associated expert functions of DB2 Performance Expert for, which are described in the DB2 Performance Expert description in the Supplemental Information section, including: The new support of group buffer pool as well as the extended report and simulation functions The key benefits of specificity, reliability, flexibility, comprehensiveness, and investment protection DB2 Performance Monitor for z/os, V8 (5655-J50) contains all the performance monitoring functions of DB2 Performance Expert for, which is also described in this section, including: Performance Warehouse without specific Expert Rule of Thumb analysis and Expert SQL Queries The key benefits of specificity, reliability, flexibility, comprehensiveness, and investment protection IMS Performance Monitor for z/os (5655-G50) complements the existing IMS Performance Analyzer, a batch product for reporting IMS log and monitor data, by providing real-time status monitoring and alerts for an active IMS subsystem. When it is started, IMS Performance Monitor detects currently active IMS subsystems and any that become active

3 You may: View multiple IMS subsystems from a single monitoring station Put these subsystems into logical groups, such as data sharing groups and shared queues groups View reports that provide information to help you isolate or point to problem areas that include sysplex functions, such as, data sharing and shared message queues IMS Performance Monitor provides: General IMS information, such as, release levels, configurations, and system startup parameters An immediate sysplex view of IMS subsystem status User-specified thresholds for setting alerts Automatic detection of existing or new IMS subsystems Views of IMS overall performance Current IMS resource information to assist in tuning IBM Tools for Recovery Management DB2 Change Accumulation Tool for z/os, V1.3 (5655-F55) helps DB2 administrators minimize data recovery time by efficiently keeping current and consistent data images more readily available. DB2 Change Accumulation Tool enables you to set the scope and specificity of image copy creation, create mini logs that hold backup information about objects of interest, and quickly restore specific database objects with precision and minimal disruption. The enhancements provided by the new release are described in the Supplemental Information section. DB2 Log Analysis Tool for (5655-E56) provides you with a powerful tool to ensure high availability and complete control over data integrity. It allows you to monitor data changes by automatically building reports of changes that are made to database tables. The enhancements in this new version are described in the Supplemental Information section. DB2 Object Restore for (5697-I20) is an affordable and robust tool that enables you to recover valuable data assets on demand by quickly restoring dropped DB2 objects and their attributes without downtime, even if they no longer exist in the DB2 catalog. Such dropped objects may include databases, table spaces, tables, indexes, and data, as well as table authorizations. Version 2 exploits DB2 V8 enhancements, improves the administration of the tool s Versioning Repository, and provides increased functionality to improve your efficiency. The enhancements provided by this new version are described in the Supplemental Information section. IMS High Performance Image Copy for z/os, V3, (5655-K96) enables you to reduce operational costs and manual labor by generating image copies in a compressed format and stacking multiple image copies on the same tape. As a result, you can reduce the number of tapes required to record image copies. It now enables you to also check the accuracy of an image copy in a single, time-conserving step by eliminating several programs and data sets that would otherwise have been necessary. This version adds the following new functions and features: The image copy function takes an image copy for more than one database data set in parallel within a single step that: Provides a major reduction in the run-time of the image copy Allows you to check the accuracy of an image copy Provides parallel processing within a CA and DBDS group Provides parallel processing of multiple groups New SMS parameter keywords for the dynamic allocation of an image copy data set that: Allows you to control output data set allocation with parameters such as storage class, management class, or data class Detailed image copy data set reports based on DBRC information IBM Tools for TM Management IMS Extended Terminal Option Support for z/os (5655-L61) is a front-end to the existing IMS Extended Terminal Option (ETO) feature. With this product you can tailor all facets of ETO. It lets you set global options for the entire user community and override options for specific terminals or user IDs. The following new features and functional improvements are provided: IMS ETO Support run-time options can now be stored in either an IMS SHISAM database or in a VSAM file. This removes IMS Database Manager as a corequisite for IMS Extended Terminal Option Support. Dynamic user exit refresh is now possible for most customer user exits. Exits can now be refreshed without restarting IMS. Enhanced IMS Shared Queues support: Dynamic transaction creation in front-end IMS regions is allowed. Security record processing is added to the IMS ETO Support options database/data set batch utilities. These utilities now process all record types in the IMS ETO Support options database/data set. Section 508 of the U.S. Rehabilitation act With the possible exception of DB2 Information Integrator Classic Federation for z/os, V8 (5697-I82), the products in this announcement are capable as of their general availability, when used in accordance with IBM s associated documentation, of satisfying the applicable requirements of Section 508 of the Rehabilitation Act, provided that any assistive technology used with the product properly interoperates with it. Accessibility testing is continuing on DB2 Information Integrator Classic Federation for z/os, V8. If any accessibility deviations are found, they will be corrected in the next release of the product. Value Unit-based pricing Value Unit-based pricing will help to align the prices of these products to the principle of the PSLC pricing curve, which provides for a lower price per millions of service units (MSU) per hour for larger capacities. There is also a price benefit when customers grow their capacity. Additional capacity will be based on the number of Value Units (MSUs) the customer has already installed,

4 for example, additional capacity will not be priced starting at the base with a higher price per unit but on the capacity that is already installed. Note that Value Units of a given product cannot be exchanged/interchanged/aggregated with Value Units of another product. IPLA and subscription and support considerations IPLA licenses can be transferred from one machine to another within, but not limited to an enterprise. The customer may aggregate the capacity for all the processors the product is operated on to achieve a more economic price. This will result in a single Proof of Entitlement. It is the customer s responsibility to manage the distribution of Value Units within the limits of the entitlement of the product license. Subscription and Support must cover the same capacity as the product license entitlement. Subscription and Support will be available in the country in which the agreement is made. Statement of direction IBM will provide support for double-byte characters in a future release of DB2 Information Integrator Classic Federation for z/os, V8. All statements regarding IBM s plans, directions, and intent are subject to change or withdrawal without notice. Trademarks IMS is a trademark of International Business Machines Corporation in the United States or other countries or both. DB2, z/os, and AIX are registered trademarks of International Business Machines Corporation in the United States or other countries or both. Microsoft and Windows are trademarks of Microsoft Corporation. Other company, product, and service names may be trademarks or service marks of others

5 IBM US Announcement Supplemental Information December 2, 2003 IBM Tools for Application Management DB2 Information Integrator Classic Federation for z/os, V8 (5697-I82) The three optional features that provide support for Software AG Adabas and Computer Associates CA-Datacom and CA-IDMS data are: DB2 Information Integrator Connector for Software AG Adabas DB2 Information integrator Connector for CA-Datacom DB2 Information Integrator Connector for CA-IDMS SQL-literate tool and application developers are productive immediately. They can integrate mainframe data into everything from a simple read-oriented customer self-service Web site to a complex multi-database read/write e-commerce site. DB2 Information Integrator Classic Federation maps a logical relational table structure over existing physical databases. UNIX, Windows, Linux, and mainframe tools and applications issue standard SQL commands to these logical tables. Behind the scenes, DB2 Information Integrator Classic Federation dynamically generates native data access commands that are optimized for each database and file type. Results are automatically translated and reformatted into relational rows and columns providing seamless integration of all mainframe data assets without proprietary programming. With 60% of business data residing on the mainframe, mainframe data access is important to the success of many of today s business-critical IT initiatives including: Delivering mainframe operational data to customer self-service Web sites Connecting e-commerce sites with mainframe inventory data Integrating business intelligence systems in real time with mainframe accounting data Connecting an enterprise portal to mainframe HR data DB2 Information Integrator Classic Federation extends DB2 Information Integrator 8.1 (5724-C74) to include access to non-relational mainframe data sources. DB2 Information Integrator lets applications access diverse and distributed data including multivendor mainframe and distributed, structured and unstructured, private and public as if it were a single database. The benefits of DB2 Information Integrator Classic Federation include: Extending the value of existing mainframe investments. Rather than ripping out and replacing mainframe assets, clients can extend these investments to deliver new business applications or integrate business operations. Reducing time-to-value for integration projects that require mainframe data by eliminating proprietary coding and multiplatform development and automating complex multisource integration. Minimizing dependence on scarce legacy data skills by empowering non-mainframe staff to automatically leverage legacy data sources without investing in the proprietary skills associated with these data sources. Empowering IT to rapidly deliver information-rich business solutions that present up-to-the-second information rather than stale copied data. DB2 Information Integrator Classic Federation can be used as a stand-alone solution or in conjunction with DB2 Information Integrator 8.1. DB2 Test Database Generator for (5697-I02) The capabilities of DB2 Test Database Generator include: Flexible test data creation DB2 Test Database Generator provides several ways to generate test data on demand. You can use existing tables and data to create test data. Existing data can be copied, randomized, or sampled and then transformed or masked using a number of generation rules. You can also create test data without using any existing data as a source. DB2 Test Database Generator provides the utmost flexibility in data structure and content design providing you with an extremely flexible set of generation rules. Creation and population of DB2 objects When creating test data using DB2 Test Database Generator you can choose to have the test data created directly in an existing DB2 database. This saves the step of running the SQL or DDL after test data has been created. After test data creation DB2 Test Database Generator will automatically create and populate DB2 objects. This option is available in most DB2 Test Database Generator configurations. Flexible input and output options The following formats may be used: Input -- DB2 Tables -- DB2 Views -- Text (both fixed-width and delimited) files Output -- SQL -- XML -- Text (both fixed-width and delimited) -- DB2 Data (Test data is automatically added directly to existing DB2 tables.) -- DB2 Load Format (This option is available when the DB2 Test Database Generator server is located on z/os or OS/390.) This announcement is provided for your information only. For additional information, contact your IBM representative, call 800-IBM-4YOU, or visit the IBM home page at: IBM United States IBM is a registered trademark of International Business Machines Corporation

6 Batch generation DB2 Test Database Generator includes a batch generation facility. It allows you to: Define the test data that you want to create in advance Then run any network-intensive test data generation at a convenient time by using your favorite scheduler IBM Tools for Performance Management DB2 Performance Expert for (5655-J49) New capabilities and functions in Version 2 include: DB2 for z/os, V8 support: New V8 counters are shown at the workstation end-user interface and on reports. Long names are supported at online displays and in reports. Monitoring of DB2 Connect and the connection with remote applications along with the host thread information give you a complete picture of resources and time spent with DB2, DB2 Connect, and in the network. Network throughput of established connections is measured and can be seen at the end-user interface. A new agent component is provided for installation on the DB2 Connect side, which supports DB2 Connect V7.2, or later, running on AIX, Windows, Linux, HP-UX, and Sun s Solaris operating environment. Group buffer pool information is available in Buffer Pool Analyzer reports. All kinds and unlimited numbers of buffer pools can now be simulated in the same step. Resource consumption is reduced and performance improved in the buffer pool analysis processes. The Performance Warehouse is extended with the capability (process step) to collect trace data. Additional expert rules and performance SQL queries are provided. Client end-user interface enhancements: System Overview supports configuration and grouping of DB2 subsystem and DB2 instances in user-defined folders to provide better mapping to your IT environment. The end-user workstation interface is improved with extensions to the graphical end-user interface. -- Graphical data views in the System Overview are provided. -- Handling and navigation of windows and functions is improved. -- You may choose either the classic or the new extended System Overview layout. The key benefits of DB2 Performance Expert are: Specificity: Detailed monitoring and in-depth analysis of DB2 for z/os and DB2 applications is provided. Reliability: DB2 Performance Expert is the tool IBM relies on to develop and test DB2. Flexibility: DB2 Performance Expert presents its analytical results in a wide range of specialized reports that can be tailored to suit individual needs. Comprehensiveness: DB2 Performance Expert helps you prevent and solve performance problems covering the full range of DB2 for z/os installations. Investment protection: The close relationship between DB2 and Performance Expert ensures that your investment in DB2 is protected. DB2 Performance Expert provides complete coverage of the latest DB2 for z/os, V8 enhancements and also supports all previous DB2 versions starting with DB2 for OS/390, V6. IBM Tools for Recovery Management DB2 Change Accumulation Tool for z/os, V1.3 (5655-F55) The following enhancements are provided: Previous releases of DB2 Change Accumulation Tool enabled you to combine the most recent image copy with any existing incremental image copies, mini-logs, and information from the DB2 log to create a new image copy. Now DB2 Change Accumulation Tool also enables you to select whether changes are written to image copies, VSAM files, or both. The ability to create one to four image copies per existing image copy, which supports the simultaneous creation of LP/LB and RP/RB image copies. The new mini-log control table (MCT) maintenance function enables you to selectively delete rows from the MCT based on criteria, such as database, tablespace, index space, partition, date, and age. This prevents the MCT from exceeding an acceptable size and avoids the risk of losing valuable mini-log information. The ability for you to create image copies of all catalog tables except for SYSIBM.SYSCOPY. DB2 Log Analysis Tool for (5655-E56) The following enhancements have been made in this version: Support for DB2 V8 Allows you to exploit the features available in DB2 V8. New and advanced filters These filters provide: More granularity Easier specification that carries through to output reports and files Ability to archive output Allows you to re-run a detail report without incurring the overhead of the original run. Ability to audit table activity Allows you to use the current LOAD process to load detail report data into a single repository called an audit table which may: Have any table loaded into it Have queries made against it Contain every table s modification activity

7 Automatic mode for details reports Allows you to request that DB2 Log Analysis Tool determine if the most efficient way to run a details report is to read the logs forward or backward. You no longer have to make this determination. Log Analysis Tool will choose the most efficient method for you. Continuous mode Allows you to specify: An end date and time When to stop continuous mode and start running incrementally Exclusion filters Exclusion filters have been added for object and miscellaneous filters. These filters make it easier to remove a small subset of unneeded objects. Fastpath processing Generates details reports very efficiently. It reads the logs the same way the general report does, but does not: Read beyond the time frame requested Use other resources to resolve full row images, such as, image copies or current table space data Saving filters to a file Filters saved into a file for re-use can be used from both the general and detail report panels. This increases efficiency whenever a large set of filters is needed for re-use. This option allows you to save only the filters and change the log ranges for subsequent runs. Quiet time This feature allows you to determine periods of inactivity in your DB2 subsystem. Inactivity means: No log records were found pertaining to the filters provided. There were no outstanding units of work pertaining to the filters provided. Quiet time allows you to find time periods in your subsystem that may be used for a wide variety of activities, such as recovery. Warning processing A change in warning processing allows you to specify whether to proceed or stop after a DB2 Log Analysis Tool warning is encountered. In previous releases warnings did not stop the report processes. With this new feature each user can determine whether to continue or stop processing when a warning is encountered. LOAD/LOAD REPLACE LOG(YES) Provides the capability to generate detail level output from the LOAD and LOAD REPLACE processes. Previously, reporting on the LOAD and LOAD REPLACE utilities was provided, but any needed inserts and deletes were not created. Now, if the utilities were run with the LOG(YES) option, then the inserts and deletes are created from the data for these utilities in the log. DB2 Object Restore for (5697-I20) The following enhancements have been made to Version 2: Support for DB2 V8 Allows you to exploit the features available in DB2 V8. Double-byte character set (DBCS) support DBCS is supported for input and output. This allows you to use DB2 Object Restore with DBCS object names. Single thread Versioning Repository update To prevent your users from unnecessarily consuming valuable system resources, Object Restore prevents multiple, concurrent Versioning Repository updates. This ensures that your system s resources are available when they are most needed. Partial Versioning Repository refresh Object Restore has implemented a method through which you can perform a partial Versioning Repository refresh. You are no longer required to refresh the entire Versioning Repository if you know the individual database that contains the changes that you want to save. This will save you time and system resources. DB2 subsystem ID (SSID) list No longer do you have to remember the numerous DB2 subsystems at your site. Object Restore displays a list of defined DB2 SSIDs from which you can select the one you want to use. Single table recovery Object Restore allows you to recover a single table from image copies, UNLOAD utility backups, and dropped tables in table space VSAM data sets. If you have DB2 High Performance Unload installed, then you can use it when doing single table recovery from an image copy. This is much more efficient than recovering an entire table space when all you need is one table. Point-in-time SQL JCL recovery Object Restore can restore a DB2 table to a point in time of your choosing by using an interface with DB2 Log Analysis Tool. This makes the point-in-time restoration a one step rather than a multiple step process as in prior versions. SYSCOPY recovery Object Restore can recover any SYSCOPY rows that have been archived in the Versioning Repository. These rows would have been either irretrievably lost or recoverable only through a lengthy resource and time-intensive restore from backup resources. Offering information Product information will be available through the Offering Information Web site at: Publications The IBM Publications Center is at:

8 The Publications Center is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided. Payment options for orders are via credit card or customer number. A large number of publications are available online in various file formats. They can all be downloaded free of charge. The IBM Publications Notification System (PNS) portal is at: messages/welcome The PNS enables subscribers to set up profiles of interest by order number/product number. PNS subscribers automatically receive notifications by of all new publications defined in their profiles. These may then be ordered/downloaded via the Publications Center. One copy of the following publications is supplied automatically with the basic machine-readable material. Title DB2 Buffer Pool Analyzer for (5697-H82) License Information DB2 Change Accumulation Tool for z/os, V1.3 (5655-F55) License Information DB2 Information Integrator Classic Federation for z/os (5697-I82) License Information DB2 Log Analysis Tool for (5655-E56) License Information DB2 Object Restore for (5697-I20) License Information DB2 Performance Expert for (5655-J49) License Information DB2 Performance Monitor for z/os, V8 (5655-J50) License Information DB2 Test Database Generator for z/os, V2 (5697-I02) License Information Order number GC GC GC GC GC GC GC GC IMS Extended Terminal Option Support GC for z/os, V3 (5655-L61) License Information IMS High Performance Image Copy for z/os, V3 (5655-K96) License Information IMS Performance Monitor for z/os (5655-G50) License Information GC GC The following publications cannot be ordered in hardcopy. The publications are made available on the Web at: The publications supporting DB2 Information Integrator Classic Federation for z/os, V8 are also available on the Web at: db2ii/support.html Publications on CD-ROM for the products in this announcement will be available on the next release of z/os Software Products Collection (SK3T-4270), BookManager and PDF formats with one exception: The books supporting DB2 Information Integrator Classic Federation for z/os, V8 will be available only in PDF format. Title Order number DB2 Buffer Pool Analyzer for (5697-H82) Buffer Pool Analyzer User s Guide Installation and Customization Messages SC SC SC DB2 Change Accumulation Tool for z/os, V1.3 (5655-F55) User s Guide SC DB2 Information Integrator Classic Federation for z/os, V8 (5697-I82) Getting Started Guide Release Notes Reference Connectors Guide Systems Messages DataMapper Guide Integration Workbench Guide DB2 Log Analysis Tool for (5655-E56) User s Guide DB2 Object Restore for (5697-I20) User s Guide DB2 Performance Expert for (5655-J49) Buffer Pool Analyzer User s Guide Installation and Customization Messages Monitoring Performance from ISPF Monitoring Performance from the Workstation Report Command Reference Report Reference Reporting User s Guide DB2 Performance Monitor for z/os, V8 (5655-J50) Installation and Customization Messages Monitoring Performance from ISPF Monitoring Performance from the Workstation Report Command Reference Report Reference Reporting User s Guide GC GC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC DB2 Test Database Generator for (5697-I02) User s Guide SC IMS Extended Terminal Option Support for z/os, V3 (5655-L61) User s Guide SC

9 Title IMS High Performance Image Copy for z/os, V3 (5655-K96) User s Guide IMS Performance Monitor for z/os (5655-G50) User s Guide The IBM Publications Center Portal is at: Order number SC SC The following material is available on the Internet at: Overview brochure: DB2 and IMS Tools (GC ) Fact Sheets DB2 Buffer Pool Analyzer for z/os (GC ) DB2 Change Accumulation Tool for z/os (GC ) DB2 Information Integrator Classic Federation for z/os (GC ) DB2 Log Analysis Tool for z/os (GC ) DB2 Object Restore for z/os (GC ) DB2 Performance Expert for z/os (GC ) DB2 Performance Monitor for z/os (GC ) DB2 Test Database Generator for z/os (GC ) IMS Extended Terminal Option Support for z/os (GC ) IMS High Performance Image Copy for z/os (GC ) IMS Performance Monitor for z/os (GC ) Specification Sheets, User s Guides, and White Papers are also available on CD-ROM (GK3T-7099). Technical information Hardware requirements: The products in this announcement will operate on any hardware configuration that supports the required versions of DB2 and IMS. Software requirements: DB2 Information Integrator Classic Federation for z/os, V8 software requirements are determined by the type of data that it will be accessing: DB2 access requires DB2 V6, or later. IMS/DB access requires IMS V7, or later. Software AG Adabas access requires the DB2 Information Integrator Connector for Software AG Adabas (feature 6722) and ADABAS V7, or later. CA-Datacom/DB access requires the DB2 Information Integrator Connector for CA-Datacom (feature 6723) and Datacom V9, or later. CA-IDMS access requires the DB2 Information Integrator Connector for CA-IDMS (feature 6724) and CA-IDMS V14, or later. DB2 Test Database Generator for requires DB2 V7, or later. The other DB2 products in this announcement require DB2 V6, or later. DB2 V6 (5645-DB2) DB2 V7 (5675-DB2) DB2 V8 (5625-DB2) DB2 Performance Expert and DB2 Performance Monitor have additional software requirements: Depending on which online monitor you use ISPF, Microsoft Windows 2000 or Microsoft Windows XP is needed. The host-based graphics facility (ISPF) requires: Graphical Data Display Manager (GDDM ) V2.3 ( ) GDDM Presentation Graphics Feature (GDDM/PGF) V2.1.1 ( ) DB2 Connect Personal Edition V7 (5648-D40), or later, is needed at the workstation end-user client, if you use the Performance Warehouse. DB2 Connect Enterprise Edition or DB2 Connect Unlimited Edition V7.2 (5648-D42), or later, is needed for DB2 Connect monitoring with the following platform depending on operating system software: AIX, V4.3, or later HP-UX, V11i, or later Sun Solaris, V8, or later Linux, V2.4.10, or later Java Runtime Environment (JRE), V1.3 for the UNIX and Linux platforms Windows 2000 SP2, Windows XP The IMS products in this announcement require IMS V7, or later. IMS V7 (5655-B01) IMS V8 (5655-C56) Limitations: IMS Performance Monitor offers limited support of IMS Version 6 ( ). IMS Performance Monitor does not include the interface to Common Queue Server for shared queue information, or long-lock system exceptions, for IMS Version 6. IMS Versions 7 and 8 are fully supported by IMS Performance Monitor. Planning information Packaging: The programs in this announcement are distributed with the following content: Basic machine-readable material on tape Program Directory Proof of Entitlement (PoE) IBM International Program License Agreement (IPLA) The PoE for DB2 Information Integrator Classic Federation for z/os is contained in its IPLA. License Information DB2 Information Integrator Classic Federation for z/os also includes a CD-ROM. Security, auditability, and control The announced programs use the security and auditability features of the host operating system software. The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communication facilities

10 Ordering information The products in this announcement have one charge unit: Value Unit. Value Unit-based pricing will help to align the prices of these products to the principle of the PSLC pricing curve, which delivers a lower price per MSU (per hour) for larger capacities. There is also a price benefit when customers grow their capacity. Additional capacity will be based on the number of Value Units (MSUs) the customer has already installed, for example, additional capacity will not be priced starting at the base with a higher price per unit but on the capacity that is already installed. Note that Value Units of a given product cannot be exchanged, interchanged, or aggregated with Value Units of another product. Value Unit exhibit VUE007 MSUs MSUs minimum maximum Value Units/MSU Base Tier A Tier B Tier C Tier D Value Units for non MSU-based S/390 processors: Hardware MP3000 H30 6 MP3000 H50 8 MP3000 H70 12 ESL Models 2 Value Units/machine Ordering example: The total number of Value units is calculated according to the following example. If the customer has installed 1,500 MSUs, the applicable value would be: Translation from MSUs to Value Units MSUs * Value Units/MSU = Value Units Base 3 * 1.00 = 3.00 Tier A 42 *.45 = Tier B 130 *.36 = Tier C 140 *.27 = Tier D 1,185 *.20 = Total 1, When calculating the total number of Value Units, the sum is to be rounded up to the next integer. Example: In the above ordering example, for the product running on a machine with 1,500 MSUs requiring 344 Value Units, order feature number 0001, quantity 94, and feature number 0002, quantity 1. Ordering z/os through the Internet ShopzSeries (formerly SHOPS390) provides an easy way to plan and order your z/os ServerPac or CBPDO. It will analyze your current installation, determine the correct product migration, and present your new configuration based on z/os. Additional products can also be added to your order (including determination of whether all product requisites are satisfied). ShopzSeries is available in the U.S. and several countries in Europe. In countries where ShopzSeries is not yet available, contact your IBM representative (or Business Partner) to handle your order via the traditional IBM ordering process. For more details and availability, visit the ShopzSeries Web site at: ShopzSeries/ShopzSeries.jsp Basic license: To order, specify the program number, feature number 9001 for asset registration, and the one-time charge (OTC) feature number. Also specify the feature number of the desired distribution medium. To suppress shipment of media, select the license-only option in CFSW. When ordering DB2 and IMS Tools for use in a Parallel Sysplex environment specify the number of Value Units to cover the MSU capacity of the machines in the Parallel Sysplex to which DB2, IMS, or both are licensed. The following examples illustrate how this rule applies to different situations. DB2, IMS, or both licensed on a single server In a single IBM zseries server with a capacity of 140 MSUs with DB2, IMS or both are licensed to it, DB2 and IMS Tools licenses are based on the 140 MSU capacity of the machine. DB2, IMS, or both licensed under PSLC in a sysplex In a four-way sysplex with DB2, IMS, or both on all four machines in the sysplex, DB2 and IMS Tools licenses are based on the total capacity in MSUs of all four machines or the total number of MSUs in the sysplex. DB2, IMS, or both licensed under PSLC in a sysplex under CEC level pricing In a four-way sysplex with DB2, IMS, or both licensed to two machines in the sysplex, DB2 and IMS Tools licenses are based on the total capacity in MSUs of the two machines where DB2, IMS, or both are licensed. Trade-ups are available to DB2 Performance Expert for from: DB2 Performance Monitor for z/os DB2 Buffer Pool Analyzer for z/os Note: DB2 Information Integrator Classic Federation for z/os, V8 (5697-I82) is not available as a Customized Offering (CBPDO). It is a standalone product and does not have On/Off Capacity on Demand Temporary Use Charge billing feature numbers. The ordering information for the following products has not changed. Product name PID DB2 Change Accumulation Tool for 5655-F55 z/os, V1.3 Subscription and Support for: DB2 Buffer Pool Analyzer 5655-E55 DB2 Log Analysis Tool 5655-E86 DB2 Object Restore 5655-E92 DB2 Performance Expert 5655-I31 DB2 Performance Monitor 5655-E81 DB2 Test Database Generator 5655-E47 and all prior versions IMS Extended Terminal 5655-E13 Option Support IMS High Performance Image Copy 5655-E20 and all prior versions

11 The ordering information for the other products in this announcement follows: OTC Medium Program feature feature Description number number number Medium DB2 Buffer Pool Analyzer 5697-H Tape for One Value Unit Value Units 0002 One MSU-day MSU-days 0004 DB2 Information Integrator 5697-I Tape Classic Federation for z/os, V8 One Value Unit Value Units 0002 Optional features DB2 Information Integrator 6722 Tape Connector for Software AG Adaba One Value Unit Value Units 0008 DB2 Information Integrator 6723 Tape Connector for CA-Datacom One Value Unit Value Units 0004 DB2 Information Integrator 6724 Tape Connector for CA-IDMS One Value Unit Value Units 0006 DB2 Log Analysis Tool for 5655-E Tape One Value Unit Value Units 0004 One MSU-day MSU-days 0006 DB2 Object Restore for 5697-I Tape One Value Unit Value Units 0002 One MSU-day MSU-days 0004 DB2 Performance Expert for 5655-J Tape One Value Unit Value Units 0010 One MSU-day MSU-days 0012 Trade-up from Buffer Pool Analyzer One Value Unit Value Units 0024 Trade-up from Performance Monitor One Value Unit Value Units

12 OTC Medium Program feature feature Description number number number Medium DB2 Performance Monitor for 5655-J Tape z/os, V8 One Value Unit Value Units 0002 One MSU-day MSU-days 0004 DB2 Test Database Generator 5697-I Tape for One Value Unit Value Units 0002 One MSU-day MSU-days 0004 IMS Extended Terminal Option 5655-L Tape Support for z/os, V3 One Value Unit Value Units 0002 One MSU-day MSU-days 0004 IMS High Performance Image 5655-K Tape Copy for z/os, V3 One Value Unit Value Units 0002 One MSU-day MSU-days 0004 IMS Performance Monitor for 5655-G Tape z/os One Value Unit Value Units 0002 One MSU-day MSU-days 0004 Subscription and Support: To receive voice technical support via telephone during normal business hours, and future releases and versions at no additional charge, Subscription and Support must be ordered. The capacity of Subscription and Support (Value Units) must be the same as the capacity ordered for the product licenses. To order, specify the support program number. In Canada also specify feature number 9001 for asset registration. IBM is also providing subscription and support for these products via a separately purchased offering under the terms of the IBM International Agreement for Acquisition of Support (IAAS). This offering: Includes and extends the base support to include technical support via telephone during normal business hours. Entitles customers to future releases and versions at no additional charge. Customers are not entitled to new products. Once Subscription and Support is ordered, the charges will renew automatically annually unless cancelled by the customer

13 ASC 2 ASC Medium program feature feature Description number number number Medium Subscription and Support (S&S) DB2 Information Integrator 5697-I Paper Classic Federation for z/os One Value Unit Value Units 0022 Decline 0023 One MSU Subscription & Support Registration MSU Subscription & Support Registration 0027 Optional features DB2 Information Integrator 6726 Paper Connector for Software AG Adaba One Value Unit Value Units 0043 Decline 0044 One MSU Subscription & Support Registration MSU Subscription & Support Registration 0048 DB2 Information integrator 6727 Paper Connector for CA-Datacom One Value Unit Value Units 0029 Decline 0030 One MSU Subscription & Support Registration MSU Subscription & Support Registration 0034 DB2 Information Integrator 6728 Paper Connector for CA-IDMS One Value Unit Value Units 0036 Decline 0037 One MSU Subscription & Support Registration MSU Subscription & Support Registration 0041 IMS Performance Monitor 5655-G Paper One Value Unit Value Units 0002 Decline 0003 One MSU Subscription & Support Registration MSU Subscription & Support Registration Annual support charge

14 Single version charging: To elect single version charging, the customer must notify and identify to IBM the previous program and replacement program and the machine the programs are operating on. Customized Offerings Product media is shipped only via Customized Offerings (for example, CBPDO, ServerPac, Systempac ). Non-customized items (CDs, diskettes, source media, media kits) will continue to be shipped via the stand-alone product. Terms and conditions Licensing: IPLA. PoE are required for all authorized use. These products are licensed under the IPLA, the associated Agreement for Acquisition of Support, and the Addendum for Support (Z ), which offer support with ongoing access to releases and versions of the program. These programs have a one-time license charge for use of the program and an ongoing recurring charge for the enhanced support that includes telephone assistance (voice support for defects during normal business hours) and access to updates, releases, and versions of the program as long as support is in effect. IBM Operational Support Services Support Line for S/390 and zseries is an option for customers who want added services. Limited warranty applies: Yes Warranty: This program has warranty for a minimum of one year from acquisition from IBM or an authorized business partner. The warranty provided to the customer, for at least one year from acquisition, is access to databases (read Web sites) for program information, FAQs, including any known fixes to defects, which the customer can download or obtain otherwise and install at their leisure. Program support: Enhanced Support, called Subscription and Support, includes telephone assistance (voice support for defects during normal business hours) as well as access to updates, releases, and versions of the program as long as support is in effect. The customer will be notified of discontinuance of support with 12 months notice. Money-back guarantee: If for any reason you are dissatisfied with the program, return it within 30 days from the invoice date, to the party (either IBM or its reseller) from whom you acquired it, for a refund. This applies only to your first acquisition of the program. Copy and use on home/portable computer: No Volume orders (IVO): No Passport Advantage applies: No Software Maintenance applies: No For Operating System software, the revised IBM Operational Support Services SoftwareXcel offering will provide support for those operating systems and associated products that are not available with the newly announced Software Maintenance offering. This will ensure total support coverage for your enterprise needs, including IBM and selected non-ibm products. For complete lists of products supported under both the current and revised SoftwareXcel offering, visit: For additional information on the revised IBM Operational Support Services, refer to Services Announcement , dated July 10, IBM Operational Support Services SoftwareXcel: Yes AIX/UNIX Upgrade Protection applies: No Entitled Upgrade for current AIX/UNIX Upgrade Protection licensees: No iseries Software Subscription applies: No Variable charges apply: No Educational allowance available: Yes, 15% education allowance applies to qualified education institution customers. Replaced program program name Replacement program program name Extended Terminal IMS Extended Terminal Option Support for Support Option for z/os, IMS/ESA (5697-D68) V3 (5655-L61) DB2 UDB Server for DB2 Buffer Pool Analyzer OS/390 V6 (Buffer Pool for feature) (5645-DB2) (5697-H82) DB2 UDB Server for DB2 Performance Monitor OS/390 V6 (Performance for z/os, V8 Monitor feature) (5655-J50) (5645-DB2) DB2 Server for OS/390 DB2 Performance Monitor V5 (Performance for z/os, V8 Monitor feature) (5655-J50) (5655-DB2) DB2 Buffer Pool Tool DB2 Buffer Pool Analyzer (5697-D16) for (5697-H82) DB2 Batch Undo DB2 Log Analysis Tool (5799-GJE) for (5655-E56) IMS System Utilities/ IMS High Performance Database Tools, V2 Image Copy for z/os, (Image Copy Extensions V3 (5655-K96) Feature) ( ) Sub-capacity charges terms and conditions zseries software charges at less than full machine capacity for eligible tools apply when z/os is running in z/architecture (64-bit) mode on a zseries 900, no other MVS -based operating system is licensed to that server, and the required information is provided by the customer in accordance with the applicable terms. Sub-capacity charges for an eligible tool is based on the z/os product-defined capacity. To obtain charges at less than full machine capacity for eligible tools, the customer is required to: Determine the MSUs needed for each machine on which the tools will run. Only machines on which the customer has implemented sub-capacity Workload License Charges (WLC) according to the above terms and conditions, are eligible for charges at less than full machine capacity for the tools