CA SYSVIEW Performance Management CA RS 1403 Service List

Transcription

1 CA SYSVIEW Performance Management CA RS 1403 Service List Description Hiper 13.9 RO61467 IMS parm SKIP-DLI-SLOG-RECORDS not honored RO62064 Provide new GSVX881I message for DC Monitor recording RO62326 Storage shown as higher than available in storage display RO62453 DC00205E STARTING DATACOM CICS 14.0 WITH DCCTXPR RO62826 GSVX004E GETMAIN for workarea failed. Routine DATA$$ RO63222 Correct JCOPYOUT REXX API processing DOWN command RO63280 Ack and CLR metric commands not working for TCPALERT and MQALERT RO63398 THRESHOLD PROBLEMS WITH WARNING VALUE AND CAPINTVL RO63476 Additional support for special characters in password RO63658 MQ ID Options not working correctly RO63905 Invalid CMPCODE displayed for SMF30 records RO63907 Various problems with online help RO63938 CLIBS COMMAND NOT DISPLAYING ALL LIBRARIES RO63987 GSVXGSVX Dsn-Site-CAPLIB generated by CSM is incorrect RO64339 SYSL003E accessing older SYSLOGS from prior IPLs RO64354 GSVX737E XMDS req 010F failed in ASID, rc C rs 0 ec 00C4801+ RO64418 MSDCDEVN storage creep when monitoring definition gets changed RO64482 S0C4 abend attempt to obtain terminal type for IMS-LTERMS RO64495 OVERVIEW CPU falsely high for IFA%, IIP%, and CP% RO64554 PLOT EXPAND subcommand not working RO64562 Abend S0C4 GSVZSTCR in SYSVIEW data collectors RO64584 GSVX031E LOAD failed for module GSVSH600 RO64596 S0C4 abend in MQ Hook when force detach MQSDATA task RO64870 CSYMBOLS DOES NOT SUPPORT 64-BIT ADDRESSES RO64953 GSVX545E*INVALID RECORD LENGTH ERROR ISSUING LISTFILE RO65112 IMS detail transaction records show invalid terminal ID RO65185 RELease held job and alter field causes abend S0C1 RO65210 GSVX373E GET_ALET failed when collecting IMS ESS data RO65235 ADD IMSLOGR OPTION TO CONTROL CPI-C RECORD COLLECTION RO65236 CSRCHAR IS NOT RESOLVED PRIOR TO CALLING SAF EXIT RO65317 ABEND S0C4 GSVXMISC XTOC$$ USING EXTERNAL SECURITY RO65440 Systems config parmlib does not process routecodes correctly RO65541 Abend U issuing JJCL with SYSIN LRECL > 80 RO65858 Correct UPDA005E when duration limit of 1 is exceeded RO65963 LGCONN/LGJOBS DISPLAYS ARE BLANK ON Z/OS 2.1 RO65988 ASQUIESC/ASRESUME FAILURE LACKS ERROR MESSAGE RO66038 VTOC CYLS VALUE INCORRECT WHEN NO EXTENTS RO66111 SYSVIEW MVSDATA high CPU on z/os 1.13 and higher **HIPER** RO66190 Security access incorrect when using external security The CA RS 1403 service count for this release is 39

2 CA SYSVIEW Performance Management CA RS 1403 Service List Description Hiper 13.7 RO61315 ADD IMSLOGR OPTION TO CONTROL CPI-C RECORD COLLECTION RO61942 Multiple problems dealing with JES output file RO62088 NEW OPTION TO CONTROL ACTIVATION OF IMS DC MONITOR RO62325 Storage shown as higher than available in storage display RO62452 DC00205E STARTING DATACOM CICS 14.0 WITH DCCTXPR RO62825 GSVX004E GETMAIN for workarea failed. Routine DATA$$ RO63172 Correct JCOPYOUT REXX API processing DOWN command RO63289 S0C4 abend attempt to obtain terminal type for IMS-LTERMS RO63508 GSVX373E GET_ALET failed when collecting IMS ESS data RO63550 Abend S0C4 GSVZSTCR in SYSVIEW data collectors RO63639 Ack and CLR metric commands not working for TCPALERT and MQALERT RO63651 MQ ID Options not working correctly RO63664 Additional support for special characters in the password RO63695 ABEND S0C6 GSVKDUMP ISSUING DUMP CMD FOR SYMBOL RO63826 Invalid CMPCODE displayed for SMF30 records RO63935 CLIBS COMMAND NOT DISPLAYING ALL LIBRARIES RO63989 Abend U issuing JJCL with SYSIN LRECL > 80 RO64091 MSDCDEVN storage creep when monitoring definition gets changed RO64304 SYSL003E accessing older SYSLOGS from prior IPLs RO64496 OVERVIEW CPU falsely high for IFA%, IIP%, and CP% RO64550 PLOT EXPAND subcommand not working RO64583 S0C4 abend in MQ Hook when force detach MQSDATA task RO64669 CSRCHAR IS NOT RESOLVED PRIOR TO CALLING SAF EXIT RO64746 CSYMBOLS DOES NOT SUPPORT 64-BIT ADDRESSES RO64959 GSVX545E*INVALID RECORD LENGTH ERROR ISSUING LISTFILE RO65070 System config parmlib does not process routecodes correctly RO65095 IMS detail transaction records show invalid terminal ID RO65184 RELease held job and alter field causes abend S0C1 RO65355 ABEND S0C4 GSVXMISC XTOC$$ USING EXTERNAL SECURITY RO65398 JOBCLASS STATUS FIELD IS NOT SHOWING HELD VALUE RO65768 Correct UPDA005E when duration limit of 1 is exceeded RO65972 ASQUIESC/ASRESUME FAILURE LACKS ERROR MESSAGE RO65985 Security access incorrect when using external security RO66031 VTOC CYLS VALUE INCORRECT WHEN NO EXTENTS RO67303 SYSVIEW MVSDATA high CPU on z/os 1.13 and higher **HIPER** The CA RS 1403 service count for this release is 35

3 CA SYSVIEW Performance Management CA RS 1403 Service List Description Hiper 13.5 RO61466 IMS parm SKIP-DLI-SLOG-RECORDS not honored RO61956 Multiple problems in external security resource checking RO62095 Abend S0C4 in MQ STC if MQSDATA is forced down RO62290 Storage shown as higher than available in status display RO62441 DC00205E STARTING DATACOM CICS 14.0 WITH DCCTXPR RO63204 Abend S05B in GSVKLDIR due to loop in LISTDIR command RO63221 Correct JCOPYOUT REXX API processing DOWN command RO63273 Ack and CLR metric commands not working for TCPALERT and MQALERT RO63452 MQ ID Options not working correctly RO63665 Additional support for special characters in the password RO63861 CLIBS COMMAND NOT DISPLAYING ALL LIBRARIES RO63904 Invalid CMPCODE displayed for SMF30 records RO64340 SYSL003E accessing older SYSLOGS from prior IPLs RO64417 MSDCDEVN storage creep when monitoring definition gets changed RO64497 OVERVIEW CPU falsely high for IFA%, IIP%, and CP% RO64555 Abend S0C4 GSVZSTCR in SYSVIEW data collectors RO64635 CSYMBOLS DOES NOT SUPPORT 64-BIT ADDRESSES RO64958 GSVX545E*INVALID RECORD LENGTH ERROR ISSUING LISTFILE RO65183 RELease held job and alter field causes abend S0C1 RO65211 GSVX373E GET_ALET failed when collecting IMS ESS data RO65432 JOBCLASS STATUS FIELD IS NOT SHOWING HELD VALUE RO65441 Systems config parmlib does not process routecodes correctly RO65572 Abend U issuing JJCL with SYSIN LRECL > 80 RO65991 ASQUIESC/ASRESUME FAILURE LACKS ERROR MESSAGE RO66043 VTOC CYLS VALUE INCORRECT WHEN NO EXTENTS RO66196 Security access incorrect when using external security The CA RS 1403 service count for this release is 26

4 CA SYSVIEW Performance Management 4 CA RS 1403 Service List for CNM4D50 FMID Service Description Hiper CNM4D50 RO61466 IMS parm SKIP-DLI-SLOG-RECORDS not honored RO61956 Multiple problems in external security resource checking RO62095 Abend S0C4 in MQ STC if MQSDATA is forced down RO62290 Storage shown as higher than available in status display RO62441 DC00205E STARTING DATACOM CICS 14.0 WITH DCCTXPR RO63204 Abend S05B in GSVKLDIR due to loop in LISTDIR command RO63221 Correct JCOPYOUT REXX API processing DOWN command RO63273 Ack and CLR metric commands not working for TCPALERT and MQALERT RO63452 MQ ID Options not working correctly RO63665 Additional support for special characters in the password RO63861 CLIBS COMMAND NOT DISPLAYING ALL LIBRARIES RO63904 Invalid CMPCODE displayed for SMF30 records RO64340 SYSL003E accessing older SYSLOGS from prior IPLs RO64417 MSDCDEVN storage creep when monitoring definition gets changed RO64497 OVERVIEW CPU falsely high for IFA%, IIP%, and CP% RO64555 Abend S0C4 GSVZSTCR in SYSVIEW data collectors RO64635 CSYMBOLS DOES NOT SUPPORT 64-BIT ADDRESSES RO64958 GSVX545E*INVALID RECORD LENGTH ERROR ISSUING LISTFILE RO65183 RELease held job and alter field causes abend S0C1 RO65211 GSVX373E GET_ALET failed when collecting IMS ESS data RO65432 JOBCLASS STATUS FIELD IS NOT SHOWING HELD VALUE RO65441 Systems config parmlib does not process routecodes correctly RO65572 Abend U issuing JJCL with SYSIN LRECL > 80 RO65991 ASQUIESC/ASRESUME FAILURE LACKS ERROR MESSAGE RO66043 VTOC CYLS VALUE INCORRECT WHEN NO EXTENTS RO66196 Security access incorrect when using external security The CA RS 1403 service count for this FMID is 26

5 CA SYSVIEW Performance Management 5 CA RS 1403 Service List for CNM4D70 FMID Service Description Hiper CNM4D70 RO61315 ADD IMSLOGR OPTION TO CONTROL CPI-C RECORD COLLECTION RO61942 Multiple problems dealing with JES output file RO62088 NEW OPTION TO CONTROL ACTIVATION OF IMS DC MONITOR RO62325 Storage shown as higher than available in storage display RO62452 DC00205E STARTING DATACOM CICS 14.0 WITH DCCTXPR RO62825 GSVX004E GETMAIN for workarea failed. Routine DATA$$ RO63172 Correct JCOPYOUT REXX API processing DOWN command RO63289 S0C4 abend attempt to obtain terminal type for IMS-LTERMS RO63508 GSVX373E GET_ALET failed when collecting IMS ESS data RO63550 Abend S0C4 GSVZSTCR in SYSVIEW data collectors RO63639 Ack and CLR metric commands not working for TCPALERT and MQALERT RO63651 MQ ID Options not working correctly RO63664 Additional support for special characters in the password RO63695 ABEND S0C6 GSVKDUMP ISSUING DUMP CMD FOR SYMBOL RO63826 Invalid CMPCODE displayed for SMF30 records RO63935 CLIBS COMMAND NOT DISPLAYING ALL LIBRARIES RO63989 Abend U issuing JJCL with SYSIN LRECL > 80 RO64091 MSDCDEVN storage creep when monitoring definition gets changed RO64304 SYSL003E accessing older SYSLOGS from prior IPLs RO64496 OVERVIEW CPU falsely high for IFA%, IIP%, and CP% RO64550 PLOT EXPAND subcommand not working RO64583 S0C4 abend in MQ Hook when force detach MQSDATA task RO64669 CSRCHAR IS NOT RESOLVED PRIOR TO CALLING SAF EXIT RO64746 CSYMBOLS DOES NOT SUPPORT 64-BIT ADDRESSES RO64959 GSVX545E*INVALID RECORD LENGTH ERROR ISSUING LISTFILE RO65070 System config parmlib does not process routecodes correctly RO65095 IMS detail transaction records show invalid terminal ID RO65184 RELease held job and alter field causes abend S0C1 RO65355 ABEND S0C4 GSVXMISC XTOC$$ USING EXTERNAL SECURITY RO65398 JOBCLASS STATUS FIELD IS NOT SHOWING HELD VALUE RO65768 Correct UPDA005E when duration limit of 1 is exceeded RO65972 ASQUIESC/ASRESUME FAILURE LACKS ERROR MESSAGE RO65985 Security access incorrect when using external security RO66031 VTOC CYLS VALUE INCORRECT WHEN NO EXTENTS RO67303 SYSVIEW MVSDATA high CPU on z/os 1.13 and higher **HIPER** The CA RS 1403 service count for this FMID is 35

6 CA SYSVIEW Performance Management 6 CA RS 1403 Service List for CNM4D90 FMID Service Description Hiper CNM4D90 RO61467 IMS parm SKIP-DLI-SLOG-RECORDS not honored RO62064 Provide new GSVX881I message for DC Monitor recording RO62326 Storage shown as higher than available in storage display RO62453 DC00205E STARTING DATACOM CICS 14.0 WITH DCCTXPR RO62826 GSVX004E GETMAIN for workarea failed. Routine DATA$$ RO63222 Correct JCOPYOUT REXX API processing DOWN command RO63280 Ack and CLR metric commands not working for TCPALERT and MQALERT RO63398 THRESHOLD PROBLEMS WITH WARNING VALUE AND CAPINTVL RO63476 Additional support for special characters in password RO63658 MQ ID Options not working correctly RO63905 Invalid CMPCODE displayed for SMF30 records RO63907 Various problems with online help RO63938 CLIBS COMMAND NOT DISPLAYING ALL LIBRARIES RO63987 GSVXGSVX Dsn-Site-CAPLIB generated by CSM is incorrect RO64339 SYSL003E accessing older SYSLOGS from prior IPLs RO64354 GSVX737E XMDS req 010F failed in ASID, rc C rs 0 ec 00C4801+ RO64418 MSDCDEVN storage creep when monitoring definition gets changed RO64482 S0C4 abend attempt to obtain terminal type for IMS-LTERMS RO64495 OVERVIEW CPU falsely high for IFA%, IIP%, and CP% RO64554 PLOT EXPAND subcommand not working RO64562 Abend S0C4 GSVZSTCR in SYSVIEW data collectors RO64584 GSVX031E LOAD failed for module GSVSH600 RO64596 S0C4 abend in MQ Hook when force detach MQSDATA task RO64870 CSYMBOLS DOES NOT SUPPORT 64-BIT ADDRESSES RO64953 GSVX545E*INVALID RECORD LENGTH ERROR ISSUING LISTFILE RO65112 IMS detail transaction records show invalid terminal ID RO65185 RELease held job and alter field causes abend S0C1 RO65210 GSVX373E GET_ALET failed when collecting IMS ESS data RO65235 ADD IMSLOGR OPTION TO CONTROL CPI-C RECORD COLLECTION RO65236 CSRCHAR IS NOT RESOLVED PRIOR TO CALLING SAF EXIT RO65317 ABEND S0C4 GSVXMISC XTOC$$ USING EXTERNAL SECURITY RO65440 Systems config parmlib does not process routecodes correctly RO65541 Abend U issuing JJCL with SYSIN LRECL > 80 RO65858 Correct UPDA005E when duration limit of 1 is exceeded RO65963 LGCONN/LGJOBS DISPLAYS ARE BLANK ON Z/OS 2.1 RO65988 ASQUIESC/ASRESUME FAILURE LACKS ERROR MESSAGE RO66038 VTOC CYLS VALUE INCORRECT WHEN NO EXTENTS RO66111 SYSVIEW MVSDATA high CPU on z/os 1.13 and higher **HIPER** RO66190 Security access incorrect when using external security The CA RS 1403 service count for this FMID is 39

7 CA SYSVIEW Performance Management CA RS PTF RO RO61467 RO61467 M.C.S. ENTRIES = ++PTF(RO61467) DESC(IMS parm SKIP-DLI-SLOG-RECORDS not honored) Increase CPU may be noticed in an IMS environment with the SYSVIEW IMS option active. The default setting for option SKIP-DLI-SLOG-RECORDS in the IMSLOGR parmlib member was changed to 'NO' in SYSVIEW release 13.5, however, when attempting to change the parameter back to 'YES' at 13.5 or 13.7 it resulted in no change due to an invalid code branch that bypassed the setting. This fix changes the default value of SKIP-DLI-SLOG-RECORDS to YES. Increased CPU when upgrading to 13.5 or higher when the SYSVIEW IMS component is turned on. Increased CPU usage in IMS transactions. At 13.9 the SKIP-DLI-SLOG-RECORDS can simply be updated to 'YES' in order to turn off the recording. Once changed you need to recycle the IMSDATA task to bounce all the IMSLOGRs for the change to take affect. In SYSVIEW 13.5 or 13.7 you need to change the IMSLOGR PARMLIB member to include the following prior to the )EOF statement. PROCESS-DCM-TYPE x4e:x62:reset PROCESS-DCM-TYPE x4e:x63:reset Then recycle the IMSDATA task to bounce all the IMSLOGRs in order to set SKIP-DLI-SLOG-RECORDS to 'YES'. CA SYSVIEW VER(Z038) FMID(CNM4D90) SUP(TSD9007). ++HOLD(RO61467) FMID(CNM4D90) SYSTEM REASON(ACTION) DATE(13210) COMMENT( To dynamically install this correction: 1. Temporarily set the following option in SYSVIEW parmlib member IMSDATA: IMS-LOGGER-COMMON-REUSE NO 2. STOP/START the IMSDATA task from the ASADMIN display. 3. Change the IMSDATA parmlib member option back to: IMS-LOGGER-COMMON-REUSE YES If you wish to continue to collect DC Monitor records written by DLI you will need update IMSLOGT with the following setting since the default changes to 'YES'. SKIP-DLI-SLOG-RECORDS NO ).

8 CA SYSVIEW Performance Management CA RS PTF RO RO62064 RO62064 M.C.S. ENTRIES = ++PTF(RO62064) DESC(Provide new GSVX881I message for DC Monitor recording) Currently there is no external indication of which IMS DC Monitor Records are being monitored by the SYSVIEW for IMS option. This change provides a new message (MLWTO) to identify which DC Monitor records are being processed when IMSLOGR starts monitoring an IMS. This new message, GSVX881I will be issued for each IMSLOGR started and represents a one to one correlation to IMS control regions. The new message produced will look similar to the following: GSVX881I (IMSPROD) DCM processing enabled for records: ( ) New message is produced during IMSLOGR initialization and may be a multi line WTO depending on the number of record types being processed. CA SYSVIEW VER(Z038) FMID(CNM4D90) PRE(RO61199 RO65235 RO61944) SUP(TSD9024). ++HOLD(RO62064) FMID(CNM4D90) SYSTEM REASON(ENH) DATE(13227) COMMENT( This change will add a new message during IMSLOGR startup that looks similar to the following: GSVX881I (IMSPROD) DCM processing enabled for records: ( ) Note, this message may be a multi line WTO depending on the number of record types being processed. ).

9 CA SYSVIEW Performance Management CA RS PTF RO RO62326 RO62326 M.C.S. ENTRIES = ++PTF(RO62326) DESC(Storage shown as higher than available in storage display) In the STATUS and STORAGE displays the Total Real Storage currently includes Unassigned Storage, giving an incorrect Total Real Storage available value. STATUS and STORAGE display may show more available Real Storage than it should. STORAGE display changes from: Real storage To the following in order to break down the true storage assignment. Real storage - Assigned Real storage - Total Real storage - Unassigned Additional MVS Data Collection variables defined: STGREALT Real storage - Total STGREALU Real storage - Unassigned and the following MVS Data Collection variable changed to show Assigned: STGREAL Real storage - Assigned STATUS display was changed from: Real Storage nng To the following in order to break down the true storage assignment. Real Storage Total nng Assigned nng Unassigned ng This fix also includes two additional PLOTS PLOT STGREALU - Real Storage - Unassigned PLOT STGREALT - Real Storage - Total and the following PLOT definition was changed to reflect Assigned: PLOT STGREAL - Real Storage - Assigned Incorrect storage value in STATUS and STORAGE displays. CA SYSVIEW VER(Z038) FMID(CNM4D90) SUP(TSD9029).

10 CA SYSVIEW Performance Management CA RS PTF RO RO62453 RO62453 M.C.S. ENTRIES = ++PTF(RO62453) DESC(DC00205E STARTING DATACOM CICS 14.0 WITH DCCTXPR) SYSVIEW supplies sample exit source code of the CA Datacom CICS Services DCCTXPR exit, which includes usage of the SYSVIEW GSVCMEI assembler macro to make Monitor Exit Interface (MEI) calls for CA Ideal requests. The DCCTXPR exit source code shipped with Datacom CICS Services 14.0 changed from previous Datacom releases; a text module identification area was added to it. This causes Datacom CICS Services 14.0 startup to fail with error messages due to an invalid DCCTXPR exit. The version of DCCTXPR shipped with SYSVIEW will still work with releases of Datacom CICS Services prior to This fix provides an updated version of the DCCTXPR samplib member. The new member contains the SYSVIEW-specific source code along with instructions on where to insert this code into the DCCTXPR exit source shipped with CA Datacom CICS Services. The following error messages occur when CA Datacom CICS Services 14.0 is started in the CICS region with the SYSVIEW-supplied version of DCCTXPR: DC00205E COMPONENT DCCTXPR IS NOT ACTUALLY DCCTXPR DC00270W CICS INTERFACE UNUSABLE CA Datacom CICS Services will not initialize in the CICS region. Temporarily remove the DCCTXPR exit. CA SYSVIEW 13.9 CA Datacom CICS Services VER(Z038) FMID(CNM4D90) SUP(TSD9032). ++HOLD(RO62453) FMID(CNM4D90) SYSTEM REASON(ACTION) DATE(13240) COMMENT( Apply this fix and follow the instructions in the new sample DCCTXPR exit to implement the SYSVIEW-specific code into the DCCTXPR exit shell distributed with CA Datacom CICS Services. ).

11 CA SYSVIEW Performance Management CA RS PTF RO RO62826 RO62826 M.C.S. ENTRIES = ++PTF(RO62826) DESC(GSVX004E GETMAIN for workarea failed. Routine DATA$$) Certain SYSVIEW commands dealing with JES job queues could request more memory than they actually needed. If the requested amount of memory was not available, no output data would be displayed for the command. The following commands: JJOBQUE JHELDQUE JOUTQUE could request nearly twice the amount of memory they required. This would result in the following message, if the storage was not available: GSVX004E GETMAIN for workarea failed. Routine DATA$$ In addition, even if the command was able to display all of the requested data, trying to select one of the jobs on the display could be unsuccessful due to a lack of storage. Depending on the options selected, the JJOBQUE, JHELDQUE, and JOUTQUE commands might not display any output. Use selection criteria to reduce the number of jobs to be processed. For example, JJOBQUE userid= would require far less storage than JJOBQUE = CA SYSVIEW VER(Z038) FMID(CNM4D90) PRE(RO62255) SUP(TSD9036).

12 CA SYSVIEW Performance Management CA RS PTF RO RO63222 RO63222 M.C.S. ENTRIES = ++PTF(RO63222) DESC(Correct JCOPYOUT REXX API processing DOWN command) Using the INPUT(number,val) with the SYSVIEW REXX API encounters problems and only works on the first displayed data row. Using the 'DOWN number' command will not work correctly. Instead of scrolling a number of rows, the JES output was copied as though ENTER was key'ed. Unexpected return codes on REXX API as well as unpredictable results returned. May encounter error message: GSVX357E Input field not on display - INPUT(1,XXX) REXX API not working as expected. As a work around you can code something similar to address SYSVIEWE "C(TYPE HOME NEWLINE EREOF DATA "g.filename" ENTER)" CA SYSVIEW VER(Z038) FMID(CNM4D90) SUP(TSD9043) PRE(RO61944).

13 CA SYSVIEW Performance Management CA RS PTF RO RO63280 RO63280 M.C.S. ENTRIES = ++PTF(RO63280) DESC(Ack and CLR metric commands not working for TCPALERT and MQALERT) The ACKNOWLEDGE and CLEAR metric commands are not working properly for the TCPALERT and MQALERTS commands. An error message similar to the following will appear under these three conditions: 1. Issue the ACK or CLR line command against a TCP/IP state exception on the TCPALERT display. 2. Issue either line command against a WebSphere MQ exception on the MQALERTS display, with a resource field that allows lowercase characters. 3. Issue either line command against a WebSphere MQ channel exception on the MQALERTS display, with a resource field that is greater than 20 characters. GSV3609E Data collection metric xxxxxxx was not found Unable to issue the ACK and CLR line commands against exception alerts on the TCPALERT and MQALERTS displays. CA SYSVIEW VER(Z038) FMID(CNM4D90) SUP(TSD9045).

14 CA SYSVIEW Performance Management CA RS PTF RO RO63398 RO63398 M.C.S. ENTRIES = ++PTF(RO63398) DESC(THRESHOLD PROBLEMS WITH WARNING VALUE AND CAPINTVL) Two problems exist in the area of threshold definitions and processing across all SYSVIEW components: 1. The CapIntvl value on a threshold definition does not always work correctly. 2. A recalculation of the Limit / Pct / Warning values occurs when any attribute of a threshold definition is modified, or when using the Edit panel and pressing PF3 even if nothing was modified. 1. In the reported case a CICS threshold was defined for a transaction with a CapIntvl of 15 minutes, but the capture was triggered each time the threshold triggered. 2. In the reported case a threshold was defined with a very large Limit value and a very small Warning value, such that the calculated Pct was zero. After using the Edit line command and pressing PF3, without modifying any values on the edit panel, a recalculation of the Warning value occurred (Limit * Pct) and changed the Warning value to zero. Unexpected thresholds and captures being triggered. CA SYSVIEW VER(Z038) FMID(CNM4D90) SUP(TSD9047). ++HOLD(RO63398) FMID(CNM4D90) SYSTEM REASON(RESTART) DATE(13270) COMMENT( Apply this fix and either recycle the CICS region, or use the GSVT (terminate) and GSVS (start) transactions to recycle SYSVIEW/CICS within the CICS region. Also recycle SYSVIEW. ).

15 CA SYSVIEW Performance Management CA RS PTF RO RO63476 RO63476 M.C.S. ENTRIES = ++PTF(RO63476) DESC(Additional support for special characters in password) Currently SYSVIEW only supports the following special characters to be used in a # $ The user will not be able to log in to SYSVIEW if their password contains any other special characters. User encounters the following error message while attempting to log in to SYSVIEW: GSVX523E Invalid Password field value - invalid characters in password Unable to log in to SYSVIEW. Do not use any special characters other # $ in password. CA SYSVIEW VER(Z038) FMID(CNM4D90) SUP(TSD9048).

16 CA SYSVIEW Performance Management CA RS PTF RO RO63658 RO63658 M.C.S. ENTRIES = ++PTF(RO63658) DESC(MQ ID Options not working correctly) The following EXPLORE Report Writer ID Options were incorrectly defined as having a length of 3 characters: ID Correct Defined Option Length Length OBJNAME 48 3 OBJTYPE 8 3 OBJSUBTYPE 8 3 QMANAGER 4 3 RESNAME 48 3 RESMANAGER 48 3 This causes any filtering past the third character place to be ignored. The report generated by EXPORE Report Writer is incorrect because the ID Options were filtered incorrectly. Unable to generate a report for a specific MQ resource. CA EXPLORE Report Writer VER(Z038) FMID(CNM4D90) SUP(TSD9049).

17 CA SYSVIEW Performance Management CA RS PTF RO RO63905 RO63905 M.C.S. ENTRIES = ++PTF(RO63905) DESC(Invalid CMPCODE displayed for SMF30 records) The Report Writer output will display invalid CMPCODE values if reporting against SMF30 records (subtype 4 or 5) that consist of continuation records and the CMPCODE ID option is specified in the job control cards for the first TAB command (i.e. TAB1 CMPCODE). The report will display redundant rows of data where the lengths of the continuation records are displayed in the CMPCODE column, even though each SMF record should only consist of one CMPCODE value. Invalid completion codes are being displayed in the Report Writer report. Define the CMPCODE ID option in the second TAB command instead. For example: TAB2 CMPCODE CA EXPLORE Report Writer VER(Z038) FMID(CNM4D90) SUP(TSD9050).

18 CA SYSVIEW Performance Management CA RS PTF RO RO63907 RO63907 M.C.S. ENTRIES = ++PTF(RO63907) DESC(Various problems with online help) This addresses errors in various online help members. 1. GSV2314W and GSVX733E error messages will be produced when attempting to view help for the URESOURC command. 2. GSV2314W and HELP003E error messages will appear when issuing the FINDHELP command. 3. HELP019W error message will get generated when trying to browse the GSVC CICS command messages display (MSGSGSVC). 4. Incorrect help information is being displayed for the MQSSET command. 5. Missing TEMPLATE information in the TOPIC041 helplib member. 6. The default and max values for the OPTIONS LINES have been changed from 5000 to and to for all the logstream viewing commands, but the online help has not been updated. 1. GSV2314W GSVXLIBR BLDL Member not found GSVX733E Member URESOURC )INCLUDE UNIXVARS failed, member not found 2. GSV2314W GSVXLIBR BLDL Member not found HELP003E No help found for PRINTER 3. HELP019W Member MSGSGSVC no link field for )LINK 4. Remove the incorrect information from the MQSSET helplib member. 5. The TOPIC041 helplib member has been updated to include a description for all TEMPLATE members. 6. Update all the logstream viewing commands helplib members to the current default and max values for the LINES OPTIONS. CA SYSVIEW VER(Z038) FMID(CNM4D90) SUP(TSD9051).

19 CA SYSVIEW Performance Management CA RS PTF RO RO63938 RO63938 M.C.S. ENTRIES = ++PTF(RO63938) DESC(CLIBS COMMAND NOT DISPLAYING ALL LIBRARIES) The CLIBS command is not traversing the data buffers correctly if more than one data buffer was required to return the list of CICS dynamic libraries for a region. The CLIBS command will display an incomplete list of dynamic libraries. Unable to view all CICS dynamic libraries from SYSVIEW. CA SYSVIEW VER(Z038) FMID(CNM4D90) SUP(TSD9052).

20 CA SYSVIEW Performance Management CA RS PTF RO RO63987 RO63987 M.C.S. ENTRIES = ++PTF(RO63987) DESC(GSVXGSVX Dsn-Site-CAPLIB generated by CSM is incorrect) The Dsn-Site-CAPLIB parameter is incorrect when using CA CSM configuration to build the System Configuration Options parmlib member (GSVXGSVX). An error message similar to the following will appear when SYSVIEW attempts to read the requested capture member: GSV2328E (CAPTURE) Read CAPLIB member xxxxxxxx failed. Dsn open error Unable to perform an Event Capture. Modify the Dsn-Site-CAPLIB parameter to point to the correct CAPLIB member by changing the value of PREFIX.SITE.CNMB4CAP to PREFIX.SITE.CNM4BCAP. CA SYSVIEW VER(Z038) FMID(CNM4D90) SUP(TSD9053). ++HOLD(RO63987) FMID(CNM4D90) SYSTEM REASON(ACTION) DATE(13288) COMMENT( After applying this fix, a new deployment and configuration will need to be created in CSM/MSM to pick up the changes. ).

21 CA SYSVIEW Performance Management CA RS PTF RO RO64339 RO64339 M.C.S. ENTRIES = ++PTF(RO64339) DESC(SYSL003E accessing older SYSLOGS from prior IPLs) If an attempt was made to access SYSLOG jobs that were created from previous IPLs and did not have an output DD that started with the characters SYSLOG, message SYSL003E would be issued indicating no SYSLOG was found. The following error message occurs when entering the SYSLOG command: SYSL003E SYSLOG for <sysid> system not found Unable to view older SYSLOGS from previous IPLs. CA SYSVIEW VER(Z038) FMID(CNM4D90) SUP(TSD9056).

22 CA SYSVIEW Performance Management CA RS PTF RO RO64354 RO64354 M.C.S. ENTRIES = ++PTF(RO64354) DESC(GSVX737E XMDS req 010F failed in ASID, rc C rs 0 ec 00C4801+) An error can occur when SYSVIEW is attempting to gather file allocation data for the DSALLOC or VSAM command displays for an address space. When SDSF's LOG command is being used to view SYSLOG, an attempt to use SYSVIEW's DSALLOC or VSAM commands for that address space will receive the following message: GSVX737E XMDS req 010F failed in ASID xxxx, rc C rs ec 00C480xx The message will be received regardless of whether the DSALLOC or VSAM commands are issued from the same address space in ISPF split screen mode or from a different address space. The error message is issued and it is not possible to view the DSALLOC or VSAM displays for an address space while the SDSF LOG display is active in it. Have the user exit out of the SDSF LOG display before issuing the SYSVIEW DSALLOC or VSAM commands against that address space. CA SYSVIEW VER(Z038) FMID(CNM4D90) SUP(TSD9055). ++HOLD(RO64354) FMID(CNM4D90) SYSTEM REASON(DYNACT) DATE(13295) COMMENT( This fix must either be implemented via an IPL, since module GSVXXMDS resides in E-CSA, or the following steps can be followed to implement it dynamically. Using the dynamic method will cause a small amount of E-CSA to be orphaned. 1. Apply the fix. 2. Recycle the SYSVIEW STC's, GSSA, and any user sessions. 3. Enter command "NEWCOPY XMDS" from a SYSVIEW session. ).

23 CA SYSVIEW Performance Management CA RS PTF RO RO64418 RO64418 M.C.S. ENTRIES = ++PTF(RO64418) DESC(MSDCDEVN storage creep when monitoring definition gets changed) Additional storage may be allocated in the MSDC data space, which is anchored off of the SYSVAAST address space, when changes are made that affect which devices are being monitored on the system. In a reported case, devices were either brought online or taken offline resulting in the amount of storage allocated in the MSDC data space to double or triple. Similar behavior will also occur after modifying a DEVICE monitoring definition on the MONITOR display. Excessive storage use in the MSDC data space which could impact system paging. Do not modify DEVICE monitoring definitions dynamically. If the problem occurs recycle SYSVIEW to reinitialize the MSDC data space. CA SYSVIEW VER(Z038) FMID(CNM4D90) SUP(TSD9057) PRE(RO62326).

24 CA SYSVIEW Performance Management CA RS PTF RO RO64482 RO64482 M.C.S. ENTRIES = ++PTF(RO64482) DESC(S0C4 abend attempt to obtain terminal type for IMS-LTERMS) Possible S0C4 abends may occur when attempting to determine the terminal types during IMS data collection against IMSLTERMS. An error message similar to the following will appear in the SYSVIEW joblog when the S0C4 abend is encountered during IMS data collection against IMSLTERMS: GSVX528E (IMSDATA) ZCALL GSVPDC11,GET_LTERM failed, abend S0C4-10 Unable to determine the terminal types on the IMSLTERMS. For SYSVIEW Cold starts, disable IMS data collection against the IMS-LTERMS definition in the SCHDIMS parmlib member to stop the abends temporarily. For Warm starts, disable the IMS-LTERMS definition on the SCHEDULE display. CA SYSVIEW VER(Z038) FMID(CNM4D90) SUP(TSD9059) PRE(RO61530).

25 CA SYSVIEW Performance Management CA RS PTF RO RO64495 RO64495 M.C.S. ENTRIES = ++PTF(RO64495) DESC(OVERVIEW CPU falsely high for IFA%, IIP%, and CP%) In the OVERVIEW information area, it is possible for the CPU values for IFA%, IIP%, and CP% to occasionally display a value that is higher than the actual busy percent. This problem only occurs when the OVERVIEWType is set to REALTIME, and the actual busy percent for the processor type is at or near zero. Note that LCPU values are also affected by this problem, but typically to a much lesser degree than CPU values. CPU values for IFA%, IIP%, and CP% in the OVERVIEW information area are higher than the actual value. In some extreme cases, 100% may be displayed for a particular processor type, when the actual value was 0%. Unable to utilize OVERVIEW to accurately display CPU statistics. Any of the following techniques can be used: Refresh the display until the problem clears. Set the overview type to interval with the following command: SET OVERVIEWTYPE INTERVAL CPU statistics can be accurately displayed on the CPU command display. CA SYSVIEW VER(Z038) FMID(CNM4D90) PRE(RO61837) SUP(TSD9060).

26 CA SYSVIEW Performance Management CA RS PTF RO RO64554 RO64554 M.C.S. ENTRIES = ++PTF(RO64554) DESC(PLOT EXPAND subcommand not working) The EXPAND subcommand on the PLOT display is not showing any plot data when attempting to expand a specific plot quadrant to full screen size. Issuing the EXPAND subcommand will result in a blank screen with "No data Available" displayed. Unable to EXPAND a plot quadrant. Issue the PLOT command to display a single plot for a particular resource. CA SYSVIEW VER(Z038) FMID(CNM4D90) SUP(TSD9061).

27 CA SYSVIEW Performance Management CA RS PTF RO RO64562 RO64562 M.C.S. ENTRIES = ++PTF(RO64562) DESC(Abend S0C4 GSVZSTCR in SYSVIEW data collectors) Abend S0C4 is possible in module GSVZSTCR, during a data collection cycle in any of the data collectors that execute in the SYSVIEW STC such as MVSDATA, IMSDATA, MQSDATA, etc. Under certain circumstances Access Register 15 (AR15) is not cleared when it should be, which causes MVSDATA (or other collection task) to abend S0C4-10 with messages similar to the following displayed in the SYSVIEW job log: GSVX451E (MVSDATA) Abend S0C4-10 in MVS data collector GSVX452I (MVSDATA) SYSVIEW SRB in control at entry to abend GSVX453I (MVSDATA) Diagnostics for SRB in control at entry to abend GSVX457I (MVSDATA) Psw 078C AA1E Ilc 6 Intc 10 GSVX477I (MVSDATA) Key 8 State SUP Am 31 Asc AR GSVX458I (MVSDATA) Module GSVXNUC Addr Offset 00647A1E GSVX458I (MVSDATA) NucMod GSVZSTCR Addr Offset GSVX450I (MVSDATA) FixLvl BASE GSVX473I (MVSDATA) Routne PSTE$$ Addr 1275A5B0 Offset E GSVX459I (MVSDATA) Data at PSW addr 1275AA18 GSVX460I (MVSDATA) 00FF4780 C484D50B F068A552 GSVX455I (MVSDATA) General registers at entry to abend GSVX467I (MVSDATA) R0-R _ _ GSVX467I (MVSDATA) R2-R _ _01C78278 GSVX467I (MVSDATA) R4-R _ _01C77C78 GSVX467I (MVSDATA) R6-R _0013F7EC _140CA820 GSVX467I (MVSDATA) R8-R _13B05C _13B05060 GSVX467I (MVSDATA) R10-R _1275E _ GSVX467I (MVSDATA) R12-R _1275A5B _130315C8 GSVX467I (MVSDATA) R14-R _9275AA _1274A028 GSVX475I (MVSDATA) Access registers at entry to abend GSVX461I (MVSDATA) AR0-AR F GSVX461I (MVSDATA) AR4-AR GSVX461I (MVSDATA) AR8-AR GSVX461I (MVSDATA) AR12-AR GSVX454I (MVSDATA) Diagnostics for SYSVIEW TCB/RB at last interrupt GSVX457I (MVSDATA) Psw 070C EC4A Ilc 2 Intc 30 GSVX477I (MVSDATA) Key 0 State SUP Am 31 Asc PRI GSVX458I (MVSDATA) Module IEAVEPS1 Addr 0112E3E8 Offset GSVX456I (MVSDATA) General registers at time of interrupt GSVX467I (MVSDATA) R0-R _0EAA _7E476F28 GSVX467I (MVSDATA) R2-R _000930CB _02CD7360 GSVX467I (MVSDATA) R4-R _ _ GSVX467I (MVSDATA) R6-R _ _0BC61800 GSVX467I (MVSDATA) R8-R _00072D _92A9C4B4 GSVX467I (MVSDATA) R10-R _1257F0F _ GSVX467I (MVSDATA) R12-R _1257E8F _7F3B1700 GSVX467I (MVSDATA) R14-R _014EB _ GSVX476I (MVSDATA) Access registers at time of interrupt GSVX461I (MVSDATA) AR0-AR GSVX461I (MVSDATA) AR4-AR GSVX461I (MVSDATA) AR8-AR GSVX461I (MVSDATA) AR12-AR GSVX462I (MVSDATA) End of symptom dump Abend S0C4-10 and a dump is taken. CA SYSVIEW VER(Z038) FMID(CNM4D90) PRE(RO61530) SUP(TSD9062).

28 CA SYSVIEW Performance Management CA RS PTF RO RO64584 RO64584 M.C.S. ENTRIES = ++PTF(RO64584) DESC(GSVX031E LOAD failed for module GSVSH600) SYSVIEW is attempting to load module GSVSH600 for IBM WebSphere MQ 6.0, but support for this release of MQ was dropped in SYSVIEW 13.9 so this module should not be referenced. The following message is issued during startup of the MQSDATA subtask in the SYSVIEW STC: GSVX031E (MQSDATA) LOAD failed for module GSVSH600 Error message issued and module not loaded. CA SYSVIEW VER(Z038) FMID(CNM4D90) SUP(TSD9063).

29 CA SYSVIEW Performance Management CA RS PTF RO RO64596 RO64596 M.C.S. ENTRIES = ++PTF(RO64596) DESC(S0C4 abend in MQ Hook when force detach MQSDATA task) When the SYSVIEW STC is shutting down it allows a certain amount of time for its subtasks to terminate before forcing them to terminate. If the MQSDATA subtask is forced to terminate it is possible for an abend to occur in the SYSVIEW WebSphere MQ request intercept due to the intercept not being made inactive. Possible abend S0C4 in the WebSphere MQ address space when the SYSVIEW STC is being shut down. S0C4 abend in MQ QMgr address space. CA SYSVIEW VER(Z038) FMID(CNM4D90) PRE(RO64584) SUP(TSD9064). ++HOLD(RO64596) FMID(CNM4D90) SYSTEM REASON(DYNACT) DATE(13316) COMMENT( Apply this fix and perform the following procedures or IPL the system to make sure the new QM Hook is loaded for all MQ Queue Managers: Shut down SYSVIEW. Recycle all active MQ Queue managers. Start SYSVIEW. ).

30 CA SYSVIEW Performance Management CA RS PTF RO RO64870 RO64870 M.C.S. ENTRIES = ++PTF(RO64870) DESC(CSYMBOLS DOES NOT SUPPORT 64-BIT ADDRESSES) The CSYMBOLS command display does not support the use of 64-bit symbol/storage addresses. The CSYMBOLS command display only shows 31-bit addresses, so for pre-defined CICS symbols like GCDSA, GSDSA, and GUDSA which reside above the bar, only the low half of the address is displayed. This also causes the Select/Dump and Map line commands to show incorrect results because the address being dumped is wrong. Cannot rely on the CSYMBOLS command for 64-bit addresses. CA SYSVIEW 13.9 CA SymDump System ++VER(Z038) FMID(CNM4D90) SUP(TSD9065). ++HOLD(RO64870) FMID(CNM4D90) SYSTEM REASON(RESTART) DATE(13315) COMMENT( This fix expands the length of the Address field on the CSYMBOLS command display from 9 to 18. Apply this fix and either recycle the CICS region, or use the GSVT (terminate) and GSVS (start) transactions to recycle SYSVIEW/CICS within the CICS region. Also recycle SYSVIEW. ).

31 CA SYSVIEW Performance Management CA RS PTF RO RO64953 RO64953 M.C.S. ENTRIES = ++PTF(RO64953) DESC(GSVX545E*INVALID RECORD LENGTH ERROR ISSUING LISTFILE) Attempting to view job output files that have LRECL=32760 and RECFM=F or RECFM=U results in an incorrect error message being issued. Issuing the LISTFILE command for a job may result in the following error message: GSVX545E*Invalid 'data set name' record length, found, changed to An error message is issued but the output file is still viewable. CA SYSVIEW VER(Z038) FMID(CNM4D90) PRE(RO62232) SUP(TSD9066).

32 CA SYSVIEW Performance Management CA RS PTF RO RO65112 RO65112 M.C.S. ENTRIES = ++PTF(RO65112) DESC(IMS detail transaction records show invalid terminal ID) An invalid terminal ID is shown in the IMSTLOG detail record display. When selecting detail SMF record information for an IMS transaction the Input and Output line/terminal values contain a '/' in the middle of the name. When viewing the IMS detail transaction records the terminal ID is incorrect. The display will show something similar to the following: Input message DRRN : B Input line/terminal : A31V/T094 Output message DRRN : Output line/terminal : A31V/T094 Invalid terminal name shown. CA SYSVIEW VER(Z038) FMID(CNM4D90) SUP(TSD9067).

33 CA SYSVIEW Performance Management CA RS PTF RO RO65185 RO65185 M.C.S. ENTRIES = ++PTF(RO65185) DESC(RELease held job and alter field causes abend S0C1) Releasing a job from the LISTFILE command display using more than the first character of the word RELEASE (e.g., REL or RELEASE) in the Cmd field AND ALSO altering any of the fields on the same line of the display causes an abend S0C1. The abend does not occur if the job is released using only the single letter 'R' in the Cmd field, or if no other fields on the line are altered. The following error messages will be displayed on the user's screen and in the job log of the TSO session or VTAM user address space (depending on the interface being used to access SYSVIEW). GSVX451E Abend S0C1-01 in LISTFILE command GSVX472I Userid <userid> Terminal <termid> Interface <intf> GSVX457I Psw 078C0000 <address1> Ilc 2 Intc 01 GSVX477I Key 8 State SUP Am 31 Asc PRI GSVX458I Module IEAVCVT Addr <address2> Offset GSVX459I Data at PSW addr <address3> GSVX460I F0F3F FF625C GSVX455I General registers at entry to abend GSVX467I R0-R _ _ GSVX467I R2-R _1F1FB _1F2AAA34 GSVX467I R4-R _ _1F20094A GSVX467I R6-R _ _1F2AAA34 GSVX467I R8-R _1F _1F15C060 GSVX467I R10-R _1F1FABD _1E GSVX467I R12-R _1F1F88E _1F1F7210 GSVX467I R14-R _9F1F8AAC _00FDE460 GSVX475I Access registers at entry to abend GSVX461I AR0-AR GSVX461I AR4-AR GSVX461I AR8-AR GSVX461I AR12-AR GSVX462I End of symptom dump where <address1> = <address2> + x'42' <address2> = the address of the CVT Prefix <address3> = <address2> + x'3c' R15 = the address pointed to by location x'10' R15 = <address1> - x'02' The user's session will abend and need to be restarted. Use the line command 'R' to release held jobs rather than using 'REL' or 'RELEASE'. CA SYSVIEW VER(Z038) FMID(CNM4D90) SUP(TSD9068).

34 CA SYSVIEW Performance Management CA RS PTF RO RO65210 RO65210 M.C.S. ENTRIES = ++PTF(RO65210) DESC(GSVX373E GET_ALET failed when collecting IMS ESS data) IMS data collection against external subsystem data (ESS) will fail when collecting data from an IMS DBCTL control region. Issuing the IMSDESS command will also fail for the same reason. Error messages similar to the following can be observed in the SYSVIEW joblog when IMS data collection fails for ESS data: GSVX373E GET_ALET service failed. STOKEN=xxxxxxxxxxxxxxxx R15= R0= The above error message will also appear when attempting to issue the IMSDESS command. Unable to issue the IMSDESS command. Unable to collect or monitor IMS external subsystem data. CA SYSVIEW VER(Z038) FMID(CNM4D90) PRE(RO61530) SUP(TSD9069).

35 CA SYSVIEW Performance Management CA RS PTF RO RO65235 RO65235 M.C.S. ENTRIES = ++PTF(RO65235) DESC(ADD IMSLOGR OPTION TO CONTROL CPI-C RECORD COLLECTION) This fix provides the ability to control the logging of IMS CPI-C region summary records by introducing the following new option in the IMSLOGR parmlib member: LOG-IMSREGN-CPI-RECORDS YES/NO CPI-C records being written to the IMRS logstream without the capability of turning them off. Allow customers to turn off the logging and reduce collection. CA SYSVIEW VER(Z038) FMID(CNM4D90) PRE(RO61467 RO61530) SUP(TSD9070). ++HOLD(RO65235) FMID(CNM4D90) SYSTEM REASON(ACTION) DATE(13324) COMMENT( This change adds the new IMSLOGR parmlib setting LOG-IMSREGN-CPI-RECORDS This setting specifies if CPI-C type Region Summary records are to be recorded. Type = IMS region summary Default = Yes ).

36 CA SYSVIEW Performance Management CA RS PTF RO RO65236 RO65236 M.C.S. ENTRIES = ++PTF(RO65236) DESC(CSRCHAR IS NOT RESOLVED PRIOR TO CALLING SAF EXIT) When the profile CSRCHAR character is used in a command, the CSRCHAR resolves to the contents of the location of the cursor. However, the character is not resolved until after the call to the pre-saf security exit. In the parameter list for the pre-saf exit the parameters pointed to by SECCPRMA will still contain the actual CSRCHAR value. After return from the SAF call the CSRCHAR (' ') does get resolved with the appropriate contents pointed to by the cursor and the command works. If the SECCPRMA field is being interrogated for security purposes, the results will be incorrect. When using CSRCHAR to resolve the data pointed to by the cursor and the SECCPRMA field of the pre-saf exit is being interrogated, incorrect results will be seen. For example, your CSRCHAR is set to ' ' and you are in the ACTIVITY display and want to change the Srvclass of a job or task. You can enter 'ASSET jobname SRVCLASS ' and place the cursor on a Srvclass in the display that you wish to change to and hit enter, the command will work as expected but the contents of SECCPRMA will actually be ' ' instead of the new Srvclass value pointed to by the cursor. Command will be issued as expected unless otherwise directed in the pre-saf exit. Do not interrogate the SECCPRMA field of the pre-saf exit. CA SYSVIEW VER(Z038) FMID(CNM4D90) PRE(RO61199) SUP(TSD9071).

37 CA SYSVIEW Performance Management CA RS PTF RO RO65317 RO65317 M.C.S. ENTRIES = ++PTF(RO65317) DESC(ABEND S0C4 GSVXMISC XTOC$$ USING EXTERNAL SECURITY) If SAF external security is being used, and the Access Entity Table (AET) cache fills up, a S0C4 abend can occur in module GSVXMISC. If the AET fills up an abend with messages similar to the following can occur when the user issues any command: GSVX451E (VTAM.xxxxxxx) Abend S0C4-10 in DASD command GSVX472I (VTAM.xxxxxxx) Userid xxxxxxx Terminal A55TU001 Interface VTAM GSVX452I (VTAM.xxxxxxx) SYSVIEW SRB in control at entry to abend GSVX453I (VTAM.xxxxxxx) Diagnostics for SRB in control at entry to abend GSVX457I (VTAM.xxxxxxx) Psw 078C0000 BA9CF118 Ilc 4 Intc 10 GSVX477I (VTAM.xxxxxxx) Key 8 State SUP Am 31 Asc PRI GSVX458I (VTAM.xxxxxxx) Module GSVXMISC Addr 3A9CE000 Offset GSVX450I (VTAM.xxxxxxx) FixLvl BASE GSVX473I (VTAM.xxxxxxx) Routne XTOC$$ Addr 3A9CF0B0 Offset GSVX459I (VTAM.xxxxxxx) Data at PSW addr 3A9CF112 GSVX460I (VTAM.xxxxxxx) 4780C090 1B C60 GSVX455I (VTAM.xxxxxxx) General registers at entry to abend GSVX467I (VTAM.xxxxxxx) R0-R _00067F _3B416A18 GSVX467I (VTAM.xxxxxxx) R2-R _805AD _3B GSVX467I (VTAM.xxxxxxx) R4-R B_ _ A GSVX467I (VTAM.xxxxxxx) R6-R B_ _007ED168 GSVX467I (VTAM.xxxxxxx) R8-R _0003A _3B4BAB40 GSVX467I (VTAM.xxxxxxx) R10-R _3A75FC _3B GSVX467I (VTAM.xxxxxxx) R12-R _3A9CF0B _3B41EDE8 GSVX467I (VTAM.xxxxxxx) R14-R _3A75F45B _3A9CF0B0 A dump may be taken and the user session terminates. In the External Security Section of an internal security Group, specify a value of zero on option 'Access Entity Table Size (KB)' to disable the use of AET. CA SYSVIEW VER(Z038) FMID(CNM4D90) SUP(TSD9072).

38 CA SYSVIEW Performance Management CA RS PTF RO RO65440 RO65440 M.C.S. ENTRIES = ++PTF(RO65440) DESC(Systems config parmlib does not process routecodes correctly) The process of reading in the Route-Code parameter(s) from the System Configuration Options parmlib member is not handled correctly. In the reported case, where SYSVIEW messages with route code 2 were being issued, even though the 'Route-Code 2' parameter was not included in the parmlib member. This is due to the fact that route codes 2 and 11 are hard coded. Unable to remove WTO route codes (2 and 11) from SYSVIEW messages. CA SYSVIEW VER(Z038) FMID(CNM4D90) SUP(TSD9073).

39 CA SYSVIEW Performance Management CA RS PTF RO RO65541 RO65541 M.C.S. ENTRIES = ++PTF(RO65541) DESC(Abend U issuing JJCL with SYSIN LRECL > 80) Unable to use the JJCL line command in the following command displays to display the JCL for a job if it contains a SYSIN dataset with record length greater than 80: JHELDQUE JINIT JJOBQUE JOBSUM JOUTQUE LISTFILE LISTINP U abend encountered when issue JJCL line command to display JCL for a job that has SYSIN dataset with record length greater than 80. Unable to display JCL with JJCL line command. Ensure job does not contain any SYSIN dataset with record length greater than 80. CA SYSVIEW VER(Z038) FMID(CNM4D90) PRE(RO62385) SUP(TSD9074).