CA SYSVIEW Performance Management CA RS 1306 Service List

Transcription

1 CA SYSVIEW Performance Management CA RS 1306 Service List Description Hiper 13.7 RO52672 IMS TRANSACTION VARIABLES MISSING IN PLOTLOG/XLOG RO52763 DSALLOC data set information are missing RO52913 SAF ENTITY NAME INCORRECT FOR COMMAND VALIDATION RO53013 ALERTS ACK/CLR line command executes on wrong exception RO53321 Add diagnostic code for freemain failures RO53671 Possible abend in the IMSDATA TASK when IMS is stopping RO53968 EMVSSAF2ERR (164,x'A4') running USS commands using GSVXBAT RO54055 LIBVIEW command does not retrieve member from cache RO54185 Add CW and NW operator to the SELECT command RO54208 IMSMTO CMD DOES NOT DISPLAY THE COMMAND RESPONSE IN JES3 RO54237 S0C4 abend in module GSVXRMFR issuing RMFCHAN command RO54296 Abend in GSVXLGEX/Abend S0C1 in GSVUSTCK Easytrieve report RO54305 IMSDBASE DIRU/DIRU% incorrectly displayed RO54374 LOOP / ABEND U S05B ISSUING FRAMES CMD RO54475 SYSVIEW does not reconnect after XNET is recycled RO54482 S0C4 ABEND in GSVPMNxx in MQ 7.1 environment RO54594 GSVC012E GSVCTRUE DEACTIVATION ERROR ABEND S0C4 CICS RO54620 Modify JOUTDES fields does not prompt for confirmation RO54621 SYSTEM CLISTLIB NOT SEARCHED IF USER CLISTLIB IS DEFINED RO54690 SCM0008E SYNTAX ERROR WHEN STARTING SCM IN GSSA RO54816 Abend S0C4 issuing DASD/SPACE commands RO54995 TRACE command formatting update for PSW and CLHSE RO55087 ABEND S0C4-11 IN GSVPDB11 ISSUING IMSPSBS COMMAND RO55120 JES2 HOLD LINE COMMAND WORKING INCORRECTLY RO55171 SDSFMIGRATE C and P line command not supported RO55196 Session logoff audit record not displaying total cmds executed RO55304 SNMP alert trap message data truncated RO55411 TotLines field is blank on LISTFILE display RO55473 MSM Configuration pre-reqs modified during implementation RO55659 Incorrect Parms passed to IMOD when CICS threshold triggers RO55709 Parmlib CONTAINS NOTCONTAINS processing incorrect RO55807 S0C4 ABEND IN XPFRMAIN RUNNING THRESHOLD EXCEPTION REPORTS RO55929 Missing IMS transactions from IMS Connect RO55950 Remove INPUT LIST in GMI HELP for some objects RO56110 STEPSUM Shows Incorrect StepName/ProcStep RO56130 JOBSUM DETAIL parameter not displaying detail data RO56233 Report Writer data/time fields incorrectly displayed RO56237 PROBLEMS WITH CICS LIFETIME-EXCLUDE OPTION RO56286 JES3 command displays not returning all requested jobs RO56369 DEST command not working properly for JES2 and JES3 RO56426 PARMS MISSING ON CICS TRAP CAPTURE OPSMVS THRESHOLD ACTIONS RO56449 MSM/CSM CONFIGURATION SITEID and PROCLIB problems RO56791 ASRESUME command not working against an unquiesced job The CA RS 1306 service count for this release is 43

2 CA SYSVIEW Performance Management CA RS 1306 Service List Description Hiper 13.5 RO51233 IMSSLOGS DOES NOT SHOW AVAILABLE OLDS COUNT RO52625 DSALLOC data set information are missing RO52695 IMS TRANSACTION VARIABLES MISSING IN PLOTLOG/XLOG RO52895 SAF ENTITY NAME INCORRECT FOR COMMAND VALIDATION RO53103 ALERTS ACK/CLR line command executes on wrong exception RO53209 Slow response issuing FIND or down max in job output RO53320 Add diagnostic code for freemain failures RO53884 Possible abend in the IMSDATA TASK when IMS is stopping RO53957 S0C4 abend in module GSVXRMFR issuing RMFCHAN command RO54027 EMVSSAF2ERR (164,x'A4') running USS commands using GSVXBAT RO54184 Add CW and NW operator to the SELECT command RO54207 IMSMTO CMD DOES NOT DISPLAY THE COMMAND RESPONSE IN JES3 RO54307 IMSDBASE DIRU/DIRU% incorrectly displayed RO54348 LOOP / ABEND U S05B ISSUING FRAMES CMD RO54439 IMS S0C4 ABEND IN GSVPMNXX USING MQ ADAPTER RO54505 SYSVIEW does not reconnect after XNET is recycled RO54542 GSVC012E GSVCTRUE DEACTIVATION ERROR ABEND S0C4 CICS RO54593 Modify OUTDES fields does not prompt for confirmation RO54769 ABEND S0C4-11 IN GSVPDB11 ISSUING IMSPSBS COMMAND RO54817 Abend S0C4 issuing DASD/SPACE commands RO55226 Missing IMS transactions from IMS Connect RO55441 TotLines field is blank on LISTFILE display RO55535 Incorrect Parms passed to IMOD when CICS threshold triggers RO55742 Report Writer data/time fields incorrectly displayed RO55977 Remove INPUT LIST in GMI HELP for some objects RO56000 S0C4 ABEND IN XPFRMAIN RUNNING THRESHOLD EXCEPTION REPORTS RO56827 ASRESUME command not working against an unquiesced job The CA RS 1306 service count for this release is 27

3 CA SYSVIEW Performance Management CA RS 1306 Service List Description Hiper 13.0 RO50632 GSV3726W Error Reading Data for <JES2-data-set> with RO49054 **HIPER** RO50837 GSV3742W/GSV3701W when modifying job attributes on LISTFILE RO52590 IMS TRANSACTION VARIABLES MISSING IN PLOTLOG/XLOG RO52762 DSALLOC data set information are missing RO52831 SAF ENTITY NAME INCORRECT FOR COMMAND VALIDATION RO53319 Add diagnostic code for freemain failures RO53886 Possible abend in the IMSDATA TASK when IMS is stopping RO54028 EMVSSAF2ERR (164 x'a4') running USS commands using GSVXBAT RO54183 Add CW and NW operator to the SELECT command RO54236 S0C4 abend in module GSVXRMFR issuing RMFCHAN command RO54251 IMSDBASE DIRU/DIRU% incorrectly displayed RO54272 LOOP / ABEND U ISSUING FRAMES CMD RO54611 GSVC012E GSVCTRUE DEACTIVATION ERROR ABEND S0C4 CICS RO54818 Abend S0C4 issuing DASD/SPACE commands RO55159 IMS S0C4 ABEND IN GSVPMNXX USING MQ ADAPTER RO55204 ABEND S0C4-11 IN GSVPDB11 ISSUING IMSPSBS COMMAND RO55460 Missing IMS transactions from IMS Connect RO56003 S0C4 ABEND IN XPFRMAIN RUNNING THRESHOLD EXCEPTION REPORTS RO56234 Report Writer data/time fields incorrectly displayed RO56813 ASRESUME command not working against an unquiesced job The CA RS 1306 service count for this release is 20

4 CA SYSVIEW Performance Management CA RS 1306 Service List Description Hiper 12.7 RO44977 Abend U or U with more than 512M of XSystem data RO50937 GSV3742W/GSV3701W when modifying job attributes on LISTFILE RO52589 IMS TRANSACTION VARIABLES MISSING IN PLOTLOG/XLOG RO52761 DSALLOC data set information are missing RO52940 SAF ENTITY NAME INCORRECT FOR COMMAND VALIDATION RO53070 Storage shortage condition processing large utility reports RO53887 Possible abend in the IMSDATA TASK when IMS is stopping RO54029 EMVSSAF2ERR (164 x'a4') running USS commands using GSVXBAT RO54235 S0C4 abend in module GSVXRMFR issuing RMFCHAN command RO54306 IMSDBASE DIRU/DIRU% incorrectly displayed RO54380 GSVC012E GSVCTRUE DEACTIVATION ERROR ABEND S0C4 CICS RO54819 Abend S0C4 issuing DASD/SPACE commands RO56036 S0C4 ABEND IN XPFRMAIN RUNNING THRESHOLD EXCEPTION REPORTS The CA RS 1306 service count for this release is 13

5 CA SYSVIEW Performance Management 5 CA RS 1306 Service List for CNM4C70 FMID Service Description Hiper CNM4C70 RO44977 Abend U or U with more than 512M of XSystem data RO50937 GSV3742W/GSV3701W when modifying job attributes on LISTFILE RO52589 IMS TRANSACTION VARIABLES MISSING IN PLOTLOG/XLOG RO52761 DSALLOC data set information are missing RO52940 SAF ENTITY NAME INCORRECT FOR COMMAND VALIDATION RO53070 Storage shortage condition processing large utility reports RO53887 Possible abend in the IMSDATA TASK when IMS is stopping RO54029 EMVSSAF2ERR (164 x'a4') running USS commands using GSVXBAT RO54235 S0C4 abend in module GSVXRMFR issuing RMFCHAN command RO54306 IMSDBASE DIRU/DIRU% incorrectly displayed RO54380 GSVC012E GSVCTRUE DEACTIVATION ERROR ABEND S0C4 CICS RO54819 Abend S0C4 issuing DASD/SPACE commands RO56036 S0C4 ABEND IN XPFRMAIN RUNNING THRESHOLD EXCEPTION REPORTS The CA RS 1306 service count for this FMID is 13

6 CA SYSVIEW Performance Management 6 CA RS 1306 Service List for CNM4D00 FMID Service Description Hiper CNM4D00 RO50632 GSV3726W Error Reading Data for <JES2-data-set> with RO49054 **HIPER** RO50837 GSV3742W/GSV3701W when modifying job attributes on LISTFILE RO52590 IMS TRANSACTION VARIABLES MISSING IN PLOTLOG/XLOG RO52762 DSALLOC data set information are missing RO52831 SAF ENTITY NAME INCORRECT FOR COMMAND VALIDATION RO53319 Add diagnostic code for freemain failures RO53886 Possible abend in the IMSDATA TASK when IMS is stopping RO54028 EMVSSAF2ERR (164 x'a4') running USS commands using GSVXBAT RO54183 Add CW and NW operator to the SELECT command RO54236 S0C4 abend in module GSVXRMFR issuing RMFCHAN command RO54251 IMSDBASE DIRU/DIRU% incorrectly displayed RO54272 LOOP / ABEND U ISSUING FRAMES CMD RO54611 GSVC012E GSVCTRUE DEACTIVATION ERROR ABEND S0C4 CICS RO54818 Abend S0C4 issuing DASD/SPACE commands RO55159 IMS S0C4 ABEND IN GSVPMNXX USING MQ ADAPTER RO55204 ABEND S0C4-11 IN GSVPDB11 ISSUING IMSPSBS COMMAND RO55460 Missing IMS transactions from IMS Connect RO56003 S0C4 ABEND IN XPFRMAIN RUNNING THRESHOLD EXCEPTION REPORTS RO56234 Report Writer data/time fields incorrectly displayed RO56813 ASRESUME command not working against an unquiesced job The CA RS 1306 service count for this FMID is 20

7 CA SYSVIEW Performance Management 7 CA RS 1306 Service List for CNM4D50 FMID Service Description Hiper CNM4D50 RO51233 IMSSLOGS DOES NOT SHOW AVAILABLE OLDS COUNT RO52625 DSALLOC data set information are missing RO52695 IMS TRANSACTION VARIABLES MISSING IN PLOTLOG/XLOG RO52895 SAF ENTITY NAME INCORRECT FOR COMMAND VALIDATION RO53103 ALERTS ACK/CLR line command executes on wrong exception RO53209 Slow response issuing FIND or down max in job output RO53320 Add diagnostic code for freemain failures RO53884 Possible abend in the IMSDATA TASK when IMS is stopping RO53957 S0C4 abend in module GSVXRMFR issuing RMFCHAN command RO54027 EMVSSAF2ERR (164,x'A4') running USS commands using GSVXBAT RO54184 Add CW and NW operator to the SELECT command RO54207 IMSMTO CMD DOES NOT DISPLAY THE COMMAND RESPONSE IN JES3 RO54307 IMSDBASE DIRU/DIRU% incorrectly displayed RO54348 LOOP / ABEND U S05B ISSUING FRAMES CMD RO54439 IMS S0C4 ABEND IN GSVPMNXX USING MQ ADAPTER RO54505 SYSVIEW does not reconnect after XNET is recycled RO54542 GSVC012E GSVCTRUE DEACTIVATION ERROR ABEND S0C4 CICS RO54593 Modify OUTDES fields does not prompt for confirmation RO54769 ABEND S0C4-11 IN GSVPDB11 ISSUING IMSPSBS COMMAND RO54817 Abend S0C4 issuing DASD/SPACE commands RO55226 Missing IMS transactions from IMS Connect RO55441 TotLines field is blank on LISTFILE display RO55535 Incorrect Parms passed to IMOD when CICS threshold triggers RO55742 Report Writer data/time fields incorrectly displayed RO55977 Remove INPUT LIST in GMI HELP for some objects RO56000 S0C4 ABEND IN XPFRMAIN RUNNING THRESHOLD EXCEPTION REPORTS RO56827 ASRESUME command not working against an unquiesced job The CA RS 1306 service count for this FMID is 27

8 CA SYSVIEW Performance Management 8 CA RS 1306 Service List for CNM4D70 FMID Service Description Hiper CNM4D70 RO52672 IMS TRANSACTION VARIABLES MISSING IN PLOTLOG/XLOG RO52763 DSALLOC data set information are missing RO52913 SAF ENTITY NAME INCORRECT FOR COMMAND VALIDATION RO53013 ALERTS ACK/CLR line command executes on wrong exception RO53321 Add diagnostic code for freemain failures RO53671 Possible abend in the IMSDATA TASK when IMS is stopping RO53968 EMVSSAF2ERR (164,x'A4') running USS commands using GSVXBAT RO54055 LIBVIEW command does not retrieve member from cache RO54185 Add CW and NW operator to the SELECT command RO54208 IMSMTO CMD DOES NOT DISPLAY THE COMMAND RESPONSE IN JES3 RO54237 S0C4 abend in module GSVXRMFR issuing RMFCHAN command RO54296 Abend in GSVXLGEX/Abend S0C1 in GSVUSTCK Easytrieve report RO54305 IMSDBASE DIRU/DIRU% incorrectly displayed RO54374 LOOP / ABEND U S05B ISSUING FRAMES CMD RO54475 SYSVIEW does not reconnect after XNET is recycled RO54482 S0C4 ABEND in GSVPMNxx in MQ 7.1 environment RO54594 GSVC012E GSVCTRUE DEACTIVATION ERROR ABEND S0C4 CICS RO54620 Modify JOUTDES fields does not prompt for confirmation RO54621 SYSTEM CLISTLIB NOT SEARCHED IF USER CLISTLIB IS DEFINED RO54690 SCM0008E SYNTAX ERROR WHEN STARTING SCM IN GSSA RO54816 Abend S0C4 issuing DASD/SPACE commands RO54995 TRACE command formatting update for PSW and CLHSE RO55087 ABEND S0C4-11 IN GSVPDB11 ISSUING IMSPSBS COMMAND RO55120 JES2 HOLD LINE COMMAND WORKING INCORRECTLY RO55171 SDSFMIGRATE C and P line command not supported RO55196 Session logoff audit record not displaying total cmds executed RO55304 SNMP alert trap message data truncated RO55411 TotLines field is blank on LISTFILE display RO55473 MSM Configuration pre-reqs modified during implementation RO55659 Incorrect Parms passed to IMOD when CICS threshold triggers RO55709 Parmlib CONTAINS NOTCONTAINS processing incorrect RO55807 S0C4 ABEND IN XPFRMAIN RUNNING THRESHOLD EXCEPTION REPORTS RO55929 Missing IMS transactions from IMS Connect RO55950 Remove INPUT LIST in GMI HELP for some objects RO56110 STEPSUM Shows Incorrect StepName/ProcStep RO56130 JOBSUM DETAIL parameter not displaying detail data RO56233 Report Writer data/time fields incorrectly displayed RO56237 PROBLEMS WITH CICS LIFETIME-EXCLUDE OPTION RO56286 JES3 command displays not returning all requested jobs RO56369 DEST command not working properly for JES2 and JES3 RO56426 PARMS MISSING ON CICS TRAP CAPTURE OPSMVS THRESHOLD ACTIONS RO56449 MSM/CSM CONFIGURATION SITEID and PROCLIB problems RO56791 ASRESUME command not working against an unquiesced job The CA RS 1306 service count for this FMID is 43

9 CA SYSVIEW Performance Management CA RS PTF RO RO52672 RO52672 M.C.S. ENTRIES = ++PTF(RO52672) DESC(IMS TRANSACTION VARIABLES MISSING IN PLOTLOG/XLOG) When an IMSLOGR instance starts for an IMS it does not connect to the PLOT or XLOG log streams. Records for IMTxxxxx variables/thresholds are never written to the PLOTLOG and/or XLOG. Cannot view exception or data collection history for IMS transactionrelated variables. None. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7010).

10 CA SYSVIEW Performance Management CA RS PTF RO RO52763 RO52763 M.C.S. ENTRIES = ++PTF(RO52763) DESC(DSALLOC data set information are missing) Data sets containing XTIOT DD entries are handled incorrectly, which can cause the Volser, Devn, and Unit fields on the DSALLOC display to be blank. Also, only the first volser is shown for multi-volume data sets. Data set information Volser, Devn, and Unit may be blanks on the DSALLOC display. Note: A new DASp column is being added on the DSALLOC display. It will indicate whether the DD accounting information was requested to be suppressed at the time of allocation. When this field contains a value of DASp the IOCt, IORt and TCTE fields will be blank. Unable to accurately display Volser, Devn, and Unit fields on DSALLOC. None. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7014). ++HOLD(TSD7014) FMID(CNM4D70) SYSTEM REASON(RESTART) DATE(12339) COMMENT( This fix must either be implemented via an IPL, since module GSVXXMDS resides in E-CSA, or the following steps can be followed to implement it dynamically. Using the dynamic method will cause a small amount of E-CSA to be orphaned. 1. Apply the fix. 2. Recycle the SYSVIEW STC's, GSSA, and any user sessions. 3. Enter command "NEWCOPY XMDS" from a SYSVIEW session. This fix also adds a new field named DASp to the DSALLOC display. ).

11 CA SYSVIEW Performance Management CA RS PTF RO RO52913 RO52913 M.C.S. ENTRIES = ++PTF(RO52913) DESC(SAF ENTITY NAME INCORRECT FOR COMMAND VALIDATION) When using external security the SECCACTV (active command name) field will not contain the correct command name in a case where one command LINKs to a second command, and the security validation is being invoked by the second command; SECCACTV will contain the name of the first command rather than the second command. In the reported case a customer was using external security. A user issued the PUR line command from the CTASKS command display, and the request was denied by external security because the user did not have access to the following SAF entity name: SV.SUBC.CTASKS.PURGE The CTASKS PURGE line command does a LINK to the CICSSET command for the PURGE function. The above subcommand of PURGE should have referenced the CICSSET command, not CTASKS: SV.SUBC.CICSSET.PURGE SAF command validation calls may be made for incorrect entity names, resulting in possible failures of the requested action. None. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7017).

12 CA SYSVIEW Performance Management CA RS PTF RO RO53013 RO53013 M.C.S. ENTRIES = ++PTF(RO53013) DESC(ALERTS ACK/CLR line command executes on wrong exception) When issuing the ACK or CLR line command against an ASID-related exception metric on the ALERTS command display, the METRIC command it executes may be against the wrong exception. The problem only occurs when there are multiple jobs being monitored with the same jobname and because the jobname is used as the key to retrieve the data collection information. When issuing the METRIC command to acknowledge or clear an exception while using the jobname as the resource, the function that is performed may be against the wrong exception. Unable to perform the ACK/CLR line command functionality on the correct exception. None. CA SYSVIEW r VER(Z038) FMID(CNM4D70) PRE(RO52820) SUP(TSD7019).

13 CA SYSVIEW Performance Management CA RS PTF RO RO53321 RO53321 M.C.S. ENTRIES = ++PTF(RO53321) DESC(Add diagnostic code for freemain failures) This fix provides the ability to abend SYSVIEW and take a dump if/when an error occurs during an attempt to STORAGE RELEASE or FREEMAIN any storage. The reason for this is that a failure during FREEMAIN or STORAGE RELEASE processing may indicate that an attempt is being made to free an area of storage which is not owned by the freeing task, and which may belong to a different task. The following new options and default values are being added to the OPTIONS member of SYSVIEW's parmlib: FreeStorageAbendIfFailure Yes FreeStorageCheckTcbAddress Yes The first of these options will cause an abend and dump if any type of error occurs during STORAGE RELEASE or FREEMAIN processing. The second option will cause an abend and dump if the TCB attempting the STORAGE RELEASE or FREEMAIN is not the TCB which originally STORAGE OBTAINed or GETMAINed that storage, even if the STORAGE RELEASE or FREEMAIN would otherwise have succeeded. The third option will limit a user session to a specified limit of EPVT storage. When the limit is reached an attempt to create a new command environmental level will be rejected. In release 13.5 and above, the following new abend reason codes are added to abend U2999: HexRsn DecRsn Description STORAGE RELEASE/FREEMAIN - any error other than TCB address mismatch Request to free storage - TCB address mismatch 30A 778 Request to free Grande - TCB address mismatch storage SYSVIEW will abend and take a dump when a STORAGE RELEASE or FREEMAIN fails. If a dump and abend are not desired, set the following options in the OPTIONS member of SYSVIEW's parmlib to NO: FreeStorageAbendIfFailure Yes FreeStorageCheckTcbAddress Yes CA SYSVIEW r VER(Z038) FMID(CNM4D70) PRE(RO52596) SUP(TSD7026). ++HOLD(RO53321) FMID(CNM4D70) SYSTEM REASON(ENH) DATE(13016) COMMENT( The following new options and default values are being added to the OPTIONS member of SYSVIEW's parmlib: FreeStorageAbendIfFailure Yes FreeStorageCheckTcbAddress Yes UserSessionStorageLimit 32 The first of these options will cause an abend and dump if any type of error occurs during STORAGE RELEASE or FREEMAIN processing. The second option will cause an abend and dump if the TCB attempting the STORAGE RELEASE or FREEMAIN is not the TCB which originally STORAGE OBTAINed or GETMAINed that storage, even if the STORAGE RELEASE or FREEMAIN would otherwise have succeeded.

14 CA SYSVIEW Performance Management CA RS PTF RO53321 The third option will limit a user session to a specified limit of EPVT storage. When the limit is reached an attempt to create a new command environmental level will be rejected. In release 13.5 and above, the following new abend reason codes are added to abend U2999: HexRsn DecRsn Description STORAGE RELEASE/FREEMAIN - any error other than TCB address mismatch Request to free storage - TCB address mismatch 30A 778 Request to free Grande - TCB address mismatch storage If a dump and abend are desired, the SYSVIEW and SYSVUSER address spaces must be recycled with a COLD restart after applying this PTF. If a dump and abend are not desired, set the following options in the OPTIONS member of SYSVIEW's parmlib to NO: FreeStorageAbendIfFailure Yes FreeStorageCheckTcbAddress Yes No recycle of SYSVIEW or SYSVUSER will be necessary unless a recycle with these parameters set to YES has already been done. ).

15 CA SYSVIEW Performance Management CA RS PTF RO RO53671 RO53671 M.C.S. ENTRIES = ++PTF(RO53671) DESC(Possible abend in the IMSDATA TASK when IMS is stopping) A possible abend may occur in the IMSDATA task when an IMS control region is shutting down. Issuing any of the following data collection commands while an IMS control region is stopping can cause the abend: IMSDBASE IMSOSAM IMSVSAM IMSLTERM IMSBALG IMSOTMA IMSDESS IMSPI Shutting down an IMS control region while IMS data collection is actively running can also cause the abend. Messages similar to the following may be observed in the SYSVIEW joblog: GSVX373E (IMSDATA) GET_ALET service failed. STOKEN=000009C R15= R0= GSVX998E (IMSDATA) IMS$063E Unable to obtain IMS region info - ALSERV request abended The SYSVIEW session terminates and an SVC dump may be taken. None. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7029).

16 CA SYSVIEW Performance Management CA RS PTF RO RO53968 RO53968 M.C.S. ENTRIES = ++PTF(RO53968) DESC(EMVSSAF2ERR (164,x'A4') running USS commands using GSVXBAT) Using SYSVIEW batch (GSVXBAT) to issue commands to USS results in SAF error EMVSSAF2ERR (164 x'a4') when Security validation is set to USER. Running GSVXBAT and attempting to issue USS related commands results in the following error: USS$032E SAF/RACF error USS$034E BPX1GPE (getpwent) failed, return code EMVSSAF2ERR (164 x'a4') USS$003E BPX1GPE (getpwent) failed, rc A4 rs 0BC2080C Unable to use GSVXBAT to process USS commands. The same information may be obtained executing the commands through any other SYSVIEW interface. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7032) PRE(RO52913).

17 CA SYSVIEW Performance Management CA RS PTF RO RO54055 RO54055 M.C.S. ENTRIES = ++PTF(RO54055) DESC(LIBVIEW command does not retrieve member from cache) The LIBVIEW command can display information from cache or data set. By default LIBVIEW should retrieve a member from cache if present, But due to a missing parameter it is always reading a data set. The LIBVIEW command will retrieve and display a member from the data set instead of cache. The LIBVIEW command may display incorrect information. None. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7033).

18 CA SYSVIEW Performance Management CA RS PTF RO RO54185 RO54185 M.C.S. ENTRIES = ++PTF(RO54185) DESC(Add CW and NW operator to the SELECT command) Typically SYSVIEW is compatible with prior releases, but an enhancement made to the SELECT command at r13.9 could make it incompatible with prior releases if the SELECT command is used against cross system data. Compatibility PTF's will be required to allow prior releases of SYSVIEW to perform SELECT with the new CW and NW operators. CW - Contains word. NW - Not contains word. Without the compatibility PTF, if r13.9 system sends SELECT parameters containing CW or NW operand to a system that does not understand them. The CW and NW operators will both be treated as NC (not contains) on the remote system. SELECT command with CW or NW operand will display incorrect data. None. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7035).

19 CA SYSVIEW Performance Management CA RS PTF RO RO54208 RO54208 M.C.S. ENTRIES = ++PTF(RO54208) DESC(IMSMTO CMD DOES NOT DISPLAY THE COMMAND RESPONSE IN JES3) The IMSMTO and MTT command displays don't show IMS command responses in a JES3 environment because the IMS jobid is not properly recognized. The IMSMTO and MTT command displays don't show any IMS command output on a JES3 system. Commands are processed successfully and can be verified in the SYSLOG. No response shown in a JES3 environment. Results of the command are seen in SYSLOG. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7036).

20 CA SYSVIEW Performance Management CA RS PTF RO RO54237 RO54237 M.C.S. ENTRIES = ++PTF(RO54237) DESC(S0C4 abend in module GSVXRMFR issuing RMFCHAN command) Abend S0C4-11 may be encountered when issuing the RMCHAN command. Problem only occurs if RMF monitor III option NOIOSUB is set in the RMF ERBRMF04 parmlib member. Abend messages similar to the following will be observed: GSVX451E Abend S0C4-11 in RMCHAN command GSVX472I Userid xxxxxxx Terminal A55TG001 Interface XSSI GSVX452I SYSVIEW SRB in control at entry to abend GSVX453I Diagnostics for SRB in control at entry to abend GSVX457I Psw 078C2000 8B329C90 Ilc 6 Intc 11 GSVX477I Key 8 State SUP Am 31 Asc PRI GSVX458I Module GSVXNUC Addr 0AF10000 Offset 00419C90 GSVX458I NucMod GSVXRMFR Addr 0B Offset 00005A18 GSVX473I Routne CHAN$$ Addr 0B Offset GSVX459I Data at PSW addr 0B329C8A GSVX460I EE0D GSVX455I General registers at entry to abend GSVX467I R0-R _ _ GSVX467I R2-R _ _0D2C2FD0 GSVX467I R4-R _FFFFFFB _0D090A4C GSVX467I R6-R _0D08E _0D2C3020 GSVX467I R8-R _0D2C07F _0D1A6270 GSVX467I R10-R _0B32BFE _0CEEF000 GSVX467I R12-R _0B _0CEF9690 GSVX467I R14-R _0D090AB _ Note: The following message is being added in the MSGSRMF$ HELPLIB member: RMF$003W No RMF CHANNEL data is available on <system> It will appear when issuing the RMCHAN command if there is no RMF CHANNEL data available. The user's SYSVIEW session abends and terminates. Change option NOIOSUB to IOSUB in the RMF ERBRMF04 parmlib member. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7037).

21 CA SYSVIEW Performance Management CA RS PTF RO RO54296 RO54296 M.C.S. ENTRIES = ++PTF(RO54296) DESC(Abend in GSVXLGEX/Abend S0C1 in GSVUSTCK Easytrieve report) Two problems related to reporting on SYSVIEW SMF records exist. 1. Running any job that utilizes the SYSVIEW logger exit, GSVXLGEX, results in an abend. 2. Running any CA Easytrieve report results in an abend S0C1 in SYSVIEW module GSVUSTCK. 1. The following message will be observed in the job output: LGEX999E - Abend has occurred A LOGREC record may be created indicating an abend S0C4-04 in load module IXGSDSGT while attempting a LOGR SUSBSYS GET/READ. Jobs using the logger exit may end with an abend S001, SD23, S614, or a non-zero completion code. 2. Messages similar to the following may be observed in the Easytrieve batch report output: IEA995I SYMPTOM DUMP OUTPUT 616 SYSTEM COMPLETION CODE=0C1 REASON CODE= TIME= SEQ=05319 CPU=0000 ASID=003C PSW AT TIME OF ERROR 078D3000 8D ILC 2 INTC 01 ACTIVE LOAD MODULE ADDRESS=0D OFFSET= NAME=GSVUSTCK DATA AT PSW 0D30001A - D4C9C4CA AR/GR 0: 00BFF3A0/0D3BC7D8 1: /0D495C00 2: /0D3BC910 3: /0D : /0D30AE00 5: /0D3BC000 6: /0D : / : /0D3BC7D8 9: /0D3BC910 A: /8D3085A4 B: / C: /0D300C50 D: /0000A754 E: / A F: /8D30001E 1. Unable to utilize the SYSVIEW logger exit, GSVXLGEX. 2. Unable to run an Easytrieve report without an abend. 1. None. 2. None. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7038). ++HOLD(RO54296) FMID(CNM4D70) SYSTEM REASON(ACTION) DATE(13039) COMMENT( Apply this fix and refresh LLA. The LOGR subsystem exit (GSVXLGEX) must reside in a linklist data set. If the SYSVIEW loadlib is defined to a linklist data set, then perform an LLA REFRESH. If the SYSVIEW loadlib is not defined to a linklist data set, then the following modules in linklist must be replaced before an LLA REFRESH: GSVXLGEX GSVXLGXG (alias of GSVXLGEX) ).

22 CA SYSVIEW Performance Management CA RS PTF RO RO54305 RO54305 M.C.S. ENTRIES = ++PTF(RO54305) DESC(IMSDBASE DIRU/DIRU% incorrectly displayed) On the IMSDBASE command display, DEDB databases may display incorrect DIRU and DIRU% values. The DIRU and DIRU% values are displayed incorrectly in the IMSDBASE display. Unable to accurately display the DIRU and DIRU% values on IMSDBASE. None. CA SYSVIEW r VER(Z038) FMID(CNM4D70) PRE(RO53671) SUP(TSD7039).

23 CA SYSVIEW Performance Management CA RS PTF RO RO54374 RO54374 M.C.S. ENTRIES = ++PTF(RO54374) DESC(LOOP / ABEND U S05B ISSUING FRAMES CMD) An incorrect branch will cause a loop if the FRAMES command is issued for an address space that the end user does not have security access to. After a few minutes SYSVIEW will detect the loop and abend the user session with a U if running in non-ziip mode or a S05B if running in ziip mode. In the reported case SYSVIEW security contained a definition in the Jobnames section to prevent 'Private region info' from being displayed for a job. When a user issued the FRAMES command for this job it resulted in a loop then U abend with messages similar to the following, rather than receiving an empty FRAMES display with the security error message: Non-zIIP mode (ziipenable NO in the OPTIONS parmlib member): GSVX971I Task CPU limit exceeded (00:05:00) GSVX451E Abend U in FRAMES command GSVX472I Userid xxxxxxx Terminal A55TU003 Interface VTAM GSVX452I SYSVIEW TCB/RB not in control at entry to abend GSVX453I Diagnostics for TCB/RB in control at entry to abend GSVX457I Psw 078C2000 BAA8F56A Ilc 2 Intc 0D GSVX477I Key 8 State SUP Am 31 Asc PRI GSVX458I Module GSVXNUC Addr 3A Offset 0017F56A GSVX458I NucMod GSVXCPUR Addr 3AA8E500 Offset A GSVX473I Routne XCTM$$ Addr 3AA8F4F0 Offset A GSVX459I Data at PSW addr 3AA8F564 GSVX460I A7F A0DE GSVX455I General registers at entry to abend GSVX467I R0-R F_8C1B198C _04000BB7 GSVX467I R2-R _054731A _ GSVX467I R4-R _ _078C0000 GSVX467I R6-R _7F6A _000000C0 GSVX467I R8-R _007BB4D _3BD73110 GSVX467I R10-R _3AA _3BCD4000 GSVX467I R12-R _3AA8F4F _3BD74CA0 GSVX467I R14-R _3BD74CA _ ziip mode (ziipenable YES in the OPTIONS parmlib member): GSVX971I SRB CPU limit exceeded (00:05:00) GSVX451E Abend S05B in FRAMES command GSVX472I Userid xxxxxxx Terminal A55TU004 Interface VTAM GSVX452I SYSVIEW SRB in control at entry to abend GSVX453I Diagnostics for SRB in control at entry to abend GSVX457I Psw 078C2000 BA9B5140 Ilc 0 Intc 00 GSVX477I Key 8 State SUP Am 31 Asc PRI GSVX458I Module GSVXNUC Addr 3A Offset 000A5140 GSVX458I NucMod GSVXSTGR Addr 3A9B3E68 Offset D8 GSVX473I Routne GET$$$ Addr 3A9B4E10 Offset GSVX459I Data at PSW addr 3A9B513A GSVX460I A0BA EE0 A7F40002 GSVX455I General registers at entry to abend GSVX467I R0-R _00DC _ GSVX467I R2-R _00DC _00DC0040 GSVX467I R4-R _ _ F GSVX467I R6-R _3D391FC _3BDDB870 GSVX467I R8-R _3BE _3BCEA058 GSVX467I R10-R _3A9B _3BCE8000 GSVX467I R12-R _3A9B4E _3BCF2690 GSVX467I R14-R _3D7E _0096B000 Excessive CPU usage for a few minutes, and then an abend which will cause the user's SYSVIEW session to terminate. In security, either remove access to the FRAMES command or allow

24 CA SYSVIEW Performance Management CA RS PTF RO54374 access to the job. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7040).

25 CA SYSVIEW Performance Management CA RS PTF RO RO54475 RO54475 M.C.S. ENTRIES = ++PTF(RO54475) DESC(SYSVIEW does not reconnect after XNET is recycled) When a DB2 command is issued and SYSVIEW has not yet connected to CA DB2 Tools Xnet, SYSVIEW will connect to Xnet and stay connected. However, if the Xnet address space is recycled, SYSVIEW will lose it's connection with Xnet and will not be able to communicate without recycling the SYSVIEW user session. The following error message is received when issuing a DBxxxxx command: TCP$004E EZASMI TYPE=WRITE failed, Connection is broken DB20006E Agent XNET-AGENT-WEB request START failed - XNet reason Protocol error Unable to use the DB2 component. Recycle the user session, which may include SYSVUSER. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7042).

26 CA SYSVIEW Performance Management CA RS PTF RO RO54482 RO54482 M.C.S. ENTRIES = ++PTF(RO54482) DESC(S0C4 ABEND in GSVPMNxx in MQ 7.1 environment) Possible S0C4 ABEND in an IMS that uses WebSphere MQ due to a change in an MQ control block at An abend will occur in the IMS and the following messages will appear in the IMS joblog: GSV3099E (GSVPHRTM) Error occurred during DCMN intercept processing IEA794I SVC DUMP HAS CAPTURED: DUMPID=069 REQUESTED BY JOB (IMS) DUMP TITLE=SYSVIEW IMSLOGR. An abend occurs in IMS and the IMSLOGR will terminate. If CA CE APM is being used for IMS tracing it is possible that trace records will not be received for IMS/MQ activity. None. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7043). ++HOLD(RO54482) FMID(CNM4D70) SYSTEM REASON(DYNACT) DATE(13057) COMMENT( To dynamically install this correction: 1. Temporarily set the following option in SYSVIEW parmlib member IMSDATA: IMS-LOGGER-COMMON-REUSE NO 2. STOP/START the IMSDATA task from the ASADMIN display. 3. Change the IMSDATA parmlib member option back to: IMS-LOGGER-COMMON-REUSE YES ).

27 CA SYSVIEW Performance Management CA RS PTF RO RO54594 RO54594 M.C.S. ENTRIES = ++PTF(RO54594) DESC(GSVC012E GSVCTRUE DEACTIVATION ERROR ABEND S0C4 CICS) During SYSVIEW termination in a CICS region any task-related and global user exits will be disabled. If an error occurs on the deactivation of the task-related user exit program GSVCTRUE, SYSVIEW will still shut down but CICS will continue calling GSVCTRUE which will result in abend S0C4 due to storage being freed. This also fixes a minor problem in the same module, where the following message does not always show the correct value where the word ON appears: GSVC051I CICS Conversational monitoring has been set ON. CICS setting OFF. CVDA value 601. Messages similar to the following appear in the CICS job log. The S0C4 abend will happen each time CICS invokes GSVCTRUE while SYSVIEW is down in the region. GSVC901I CA SYSVIEW for CICS shutdown started GSVC012E CICS global user exits deactivation error. Exitname GSVCTRUE GSVC013E CICS CmdLevel error - EIBFN x2204 DISABLE PROGRAM EIBRESP 063 x3f INVEXITREQ EIBRESP2 009 x09 EIBRCODE x DFHAP0707 CICSPROD An abend (code 0C4/AKEA) has occurred in task related user exit program GSVCTRUE. DFHAP0001 CICSPROD An abend (code 0C4/AKEA) has occurred at offset X' C' in module GSVCTRUE. Repeated abends until SYSVIEW is started back up in the region or the region is recycled. None. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7046). ++HOLD(RO54594) FMID(CNM4D70) SYSTEM REASON(RESTART) DATE(13030) COMMENT( After applying this fix either the CICS region must be recycled to pick up the change, or the following steps can be followed to implement the change dynamically: 1. Use the GSVT (terminate) transaction to stop SYSVIEW/CICS in the CICS region. 2. Perform a CICS NEWCOPY for program GSVCGSVI. 3. Use the GSVS (start) transaction to bring SYSVIEW/CICS back up in the CICS region. ).

28 CA SYSVIEW Performance Management CA RS PTF RO RO54620 RO54620 M.C.S. ENTRIES = ++PTF(RO54620) DESC(Modify JOUTDES fields does not prompt for confirmation) In SYSVIEW releases prior to r13.5, the user would get a confirmation prompt when modifying the Descriptor field on the OUTDES command display. In r13.5 OUTDES was rewritten to also support JES3 and renamed to JOUTDES, and the confirmation of changes no longer occurred. The following confirmation prompt is being added back in to JOUTDES when an output descriptor is being modified: GSVX160A Enter YES to confirm: Modifications can affect other output datasets Does not force the user to double check their changes since they can be affecting multiple output files. None. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7047).

29 CA SYSVIEW Performance Management CA RS PTF RO RO54621 RO54621 M.C.S. ENTRIES = ++PTF(RO54621) DESC(SYSTEM CLISTLIB NOT SEARCHED IF USER CLISTLIB IS DEFINED) The CLIST command process will terminate if the user has a user CLISTLIB dataset defined and the requested member is not found in the user CLISTLIB. If the member is not found in the user CLISTLIB, the processing to search for the member in the system CLISTLIB dataset will not occur. An error message similar to the following will appear when the member is not found in the user CLISTLIB: GSV2088E Member zzzzz not found in user.clistlib Unable to execute any CLISTs in the system CLISTLIB when a user CLISTLIB is defined. Issue SET CLISTDSN NONE to force use of the system library. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7048).

30 CA SYSVIEW Performance Management CA RS PTF RO RO54690 RO54690 M.C.S. ENTRIES = ++PTF(RO54690) DESC(SCM0008E SYNTAX ERROR WHEN STARTING SCM IN GSSA) The SYSVIEW System Condition Monitor (SCM) will experience an error during startup in GSSA if the SYSVIEW SCM parmlib member contains any parameter library keywords such as )IF or )INCLUDE. Messages similar to the following appear in the GSSA job log: SCM9001I System Condition Monitor 13.7 starting SCM0001I System Condition Monitor ISET = SYSVIEWE SCM0002I System Condition Monitor PARMLIB = CAI.SYSVIEW.CNM4BPRM SCM0008E Syntax error: )INCLUDE SCMUSER SCM9999I System Condition Monitor has terminated The SYSVIEW System Condition Monitor will not start. Temporarily remove any special parameter library keywords. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7049). ++HOLD(RO54690) FMID(CNM4D70) SYSTEM REASON(ACTION) DATE(13035) COMMENT( To dynamically install this correction: 1. Apply this fix to update the IMOD source library CNM4BISR. 2. Use the sample IMODLOAD batch job, which can be found in the SAMPJCL and/or CNM4BSAM library, to load the new IMOD source into the ISET and compile it. Specify the following control statements in the IMODLOAD JCL: //SYSIN DD * PDSLOAD MEMBER IMOD0095 TO OUT FROM IN REPLACE IMOD SCMDRIVE COMPILE IMOD SCMDRIVE IN OUT STATUS PROD 3. Recycle CA GSS to pick up these changes. ).

31 CA SYSVIEW Performance Management CA RS PTF RO RO54816 RO54816 M.C.S. ENTRIES = ++PTF(RO54816) DESC(Abend S0C4 issuing DASD/SPACE commands) Abend S0C4 is possible when issuing or refreshing the DASD or SPACE command displays. This problem is caused when the command attempts to gather a device's SSID from a control block that MVS may have reallocated in storage. Abend can occur in modules GSVKDASD and/or GSVKSPAC. In the reported case, messages similar to the following were observed in the SYSVUSER joblog: GSVX451E Abend S0C4-04 in SPACE command GSVX457I Psw 078D0000 A40839A2 Ilc 6 Intc 04 GSVX477I Key 8 State PROB Am 31 Asc PRI GSVX458I Module GSVKSPAC Addr Offset GSVX473I Routne FMT$$$ Addr Offset Unable to issue the DASD and/or SPACE command without abend. Restart the affected user's SYSVIEW session. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7051).

32 CA SYSVIEW Performance Management CA RS PTF RO RO54995 RO54995 M.C.S. ENTRIES = ++PTF(RO54995) DESC(TRACE command formatting update for PSW and CLHSE) The TRACE command displays word 1 (control section) and word 2 (mostly zeroes) of a 16-byte PSW. This has been updated to display word 4 (instruction address) instead of word 2 of a 16-byte PSW. The current locks held string extension (CLHSE) is not being displayed in a unique field for some trace entry types. A new field, PSACLHSE, has been added to display the CLHSE for applicable trace entries. Data displayed on the TRACE command display may not be complete, or may not contain expected values. Unable to obtain complete trace information. None. CA SYSVIEW r VER(Z038) FMID(CNM4D70) PRE(RO52763) SUP(TSD7052). ++HOLD(RO54995) FMID(CNM4D70) SYSTEM REASON(ENH) DATE(13044) COMMENT( The following new field is being added to the TRACE command display: PSACLHSE - The contents of PSACLHSE, the current locks held string extension. ).

33 CA SYSVIEW Performance Management CA RS PTF RO RO55087 RO55087 M.C.S. ENTRIES = ++PTF(RO55087) DESC(ABEND S0C4-11 IN GSVPDB11 ISSUING IMSPSBS COMMAND) The IMSPSBS command may result in an S0C4-11 abend in module GSVPDBxx (xx equals the IMS version). S0C4-11 in module GSVPDB11 after issuing the IMSPSBS command which generates an SVC dump. A message similar to the following will be seen in the joblog where the users session was executing. IEA794I SVC DUMP HAS CAPTURED: 301 DUMPID=581 REQUESTED BY JOB (SYSVUSER) DUMP TITLE=CA SYSVIEW Job SYSVUSER Asid 0130 Abend S0C4-11 Mod ***NA*** Rtn ***NA*** SVC dump captured for the S0C4-11. None. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7053) PRE(RO53671).

34 CA SYSVIEW Performance Management CA RS PTF RO RO55120 RO55120 M.C.S. ENTRIES = ++PTF(RO55120) DESC(JES2 HOLD LINE COMMAND WORKING INCORRECTLY) When using the HOLD line command for job output in the output queue, the $TOJ(nnnn),NDISP=HOLD command is being issued at SYSVIEW r13.7, rather than $TOJ(nnnn),HOLD=OPER as in previous releases. The Hold line command exists on the JJOBQUE and JOUTQUE commands. When the HOLD line command is used at r13.7 it places the OUTPUT back on the held OUTPUT queue. Prior to r13.7 the HOLD line command put the OUTPUT in an operator hold which left it on the OUTPUT queue. OUTPUT is being placed in the held OUTPUT queue rather than leaving it in the OUTPUT queue. None, but after this fix OUTPUT can still be placed on the held OUTPUT queue by changing the OutDisp field to HOLD. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7054).

35 CA SYSVIEW Performance Management CA RS PTF RO RO55171 RO55171 M.C.S. ENTRIES = ++PTF(RO55171) DESC(SDSFMIGRATE C and P line command not supported) The C and P line commands on the following SYSVIEW command displays are not being converted to the D line command as they should is not supported when running with profile setting SDSFMIGRATE ON: JJOBQUE JHELDQUE JOUTQUE The following error message is displayed when issuing the C or P line command: GSVX156E Invalid line command - C Unable to use C or P SDSF line command to cancel job. Use D line command instead. CA SYSVIEW r VER(Z038) FMID(CNM4D70) PRE(RO52614) SUP(TSD7055).

36 CA SYSVIEW Performance Management CA RS PTF RO RO55196 RO55196 M.C.S. ENTRIES = ++PTF(RO55196) DESC(Session logoff audit record not displaying total cmds executed) On the AUDITLOG command display, the session logoff audit record is displaying a value of zero for the total commands executed during the session. This also causes the Command Execution section of a SMF Record Report to show "000%" for the command percentages. A SESSION_LOGOFF audit record with a Resource field value similar to the following can be observed in the AUDITLOG command: User GSVVCAPI Cmds 0 Elapsed CPUTime epct% 94.77% The Command Execution section of the audit record can also be observed in the SMFRPT display: Command SubCmd Count Pct% CPUTime EnclTime epct% zswitch Comp DUMP 1 000% % 12 TOOLKIT LINK 1 000% % BASE MENU 1 000% % 51 BASE RETURN 3 000% % 6 BASE Unable to correctly display the total number of commands executed for a session logoff audit record. None. CA SYSVIEW r VER(Z038) FMID(CNM4D70) PRE(RO53321) SUP(TSD7056).

37 CA SYSVIEW Performance Management CA RS PTF RO RO55304 RO55304 M.C.S. ENTRIES = ++PTF(RO55304) DESC(SNMP alert trap message data truncated) SNMP alert traps created by a data collection state or threshold exception do not contain the full message data of the exception. The SNMP trap message data is truncated to 13 characters for both state and threshold exceptions. SNMP alert traps created by state or threshold exception resemble the following: CAGSVX01 CA01 where CAGSVX01 is the Trap ID and CA01 is the Plex Name. All data that should follow (System, Subsystem, Jobname, etc.) is truncated. Unable to obtain complete SNMP alert traps created by state or threshold exceptions. None. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7057).

38 CA SYSVIEW Performance Management CA RS PTF RO RO55411 RO55411 M.C.S. ENTRIES = ++PTF(RO55411) DESC(TotLines field is blank on LISTFILE display) The TotLines field value on the LISTFILE command display is being obtained incorrectly. The TotLines field on the LISTFILE display was sometimes blank. Missing information. None CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7059).

39 CA SYSVIEW Performance Management CA RS PTF RO RO55473 RO55473 M.C.S. ENTRIES = ++PTF(RO55473) DESC(MSM Configuration pre-reqs modified during implementation) Using CA MSM to configure SYSVIEW can cause failures in the Convert_Runtime_PROFILE action during the CREATE_RUNTIME_PROFILE_MIG operation. The failure will surface in the implementation process when performing the Release Next option, during which the Convert_Runtime_PROFILE action is performed prior to the CNM4BLOD loadlib being created in the ALLOC_RUNTIME_LOADLIB operation. An error message similar to the following can be observed in the Results window for the failing Convert_Runtime_PROFILE action: MSMC0230E Service error: GenericExecuteService ProgramLibrary Dyn.Alloc failed Unable to implement the SYSVIEW configurations using CA MSM. Choose the Release All option when implementing SYSVIEW configurations. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7061). ++HOLD(TSD7061) FMID(CNM4D70) SYSTEM REASON(ACTION) DATE(13058) COMMENT( After applying this fix, a new deployment and configuration will need to be created in MSM to pick up the changes. ).

40 CA SYSVIEW Performance Management CA RS PTF RO RO55659 RO55659 M.C.S. ENTRIES = ++PTF(RO55659) DESC(Incorrect Parms passed to IMOD when CICS threshold triggers) In SYSVIEW r13.5, terminal id and userid were removed from the the list of parameters passed to a GSS IMOD when a CICS theshold is triggered. CICS IMOD may not operate properly if terminal ID or userid was used as conditional logic for operation. Terminal ID and userid is not available for CICS IMOD. None CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7063). ++HOLD(TSD7063) FMID(CNM4D70) SYSTEM REASON(ACTION) DATE(13063) COMMENT( 1. Apply this fix to update the IMOD source library CNM4BISR. 2. Use the sample IMODLOAD batch job, which can be found in the SAMPJCL and/or CNM4BSAM library, to load the new IMOD source into the ISET and compile it. Specify the following control statements in the IMODLOAD JCL: //SYSIN DD * PDSLOAD MEMBER IMOD0122 TO OUT FROM IN REPLACE IMOD THR_CICS COMPILE IMOD THR_CICS IN OUT STATUS PROD 3. Recycle CA GSS to pick up these changes. ).

41 CA SYSVIEW Performance Management CA RS PTF RO RO55709 RO55709 M.C.S. ENTRIES = ++PTF(RO55709) DESC(Parmlib CONTAINS NOTCONTAINS processing incorrect) Parmlib processing of a ')IF parm1 CONTAINS NOTCONTAINS parm2' statement may not always be correct. This problem is caused if parm1 contains n members, and parm2 would need to match on members 2 through n of parm1 to be true. Members 2 through n of parm1 are ignored in the CONTAINS NOTCONTAINS comparison. Parmlib processing of a ')IF parm1 CONTAINS NOTCONTAINS parm2' statement may result in an incorrect evaluation. Unable to control parmlib options that may or may not be processed as a result of an incorrect CONTAINS NOTCONTAINS evaluation. None. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7065). ++HOLD(RO55709) FMID(CNM4D70) SYSTEM REASON(ACTION) DATE(13064) COMMENT( Apply this fix and either recycle the CICS region, or use the GSVT (terminate) and GSVS (start) transactions to recycle SYSVIEW/CICS within the CICS region. ).

42 CA SYSVIEW Performance Management CA RS PTF RO RO55807 RO55807 M.C.S. ENTRIES = ++PTF(RO55807) DESC(S0C4 ABEND IN XPFRMAIN RUNNING THRESHOLD EXCEPTION REPORTS) Abend S0C4 may occur when trying to report on a SYSVIEW threshold exception record (record type 255 subtype 3). The S0C4-10 abend will occur in the XPFR2KEY csect of module XPFRMAIN when any of the following threshold variable names are defined in the report control cards and the values read in are inapplicable: RTYPE - Rule Type VTYPE - Variable Type TTYPE - Threshold Type CLASS - Threshold Class The report is not generated with an abnormal termination of the program. Do not define any of the above variable names in the report. CA EXPLORE Report Writer r VER(Z038) FMID(CNM4D70) SUP(TSD7066).

43 CA SYSVIEW Performance Management CA RS PTF RO RO55929 RO55929 M.C.S. ENTRIES = ++PTF(RO55929) DESC(Missing IMS transactions from IMS Connect) Transactions missing on multiple IMS displays that came from IMS Connect. Transactions entering IMS from IMS Connect may not appear on the IMSTIMES, IMSDAILY, IMSWAITS and IMSTLOG display. Unable to view IMS transactions from IMS Connect. None. CA SYSVIEW r VER(Z038) FMID(CNM4D70) SUP(TSD7067). ++HOLD(RO55929) FMID(CNM4D70) SYSTEM REASON(DYNACT) DATE(13067) COMMENT( To dynamically install this correction: 1. Temporarily set the following option in SYSVIEW parmlib member IMSDATA: IMS-LOGGER-COMMON-REUSE NO 2. STOP/START the IMSDATA task from the ASADMIN display. 3. Change the IMSDATA parmlib member option back to: IMS-LOGGER-COMMON-REUSE YES ).