Emergency Locator Transmitter (ELT) Service Request Form Quick Reference Guide

Transcription

1 Emergency Locator Transmitter (ELT) Service Request Form Quick Reference Guide

2 CONTENTS I. Introduction... 3 II. Accessing ASDS... 3 III. Login to ASDS... 4 IV. Accessing ELT Coding Form... 7 HONEYWELL CONFIDENTIAL This copyrighted work and all information are the property of Honeywell International Inc., Contain trade secrets and may not, in whole or in part, be used, duplicated, or disclosed for any purpose without prior written permission of Honeywell International Inc. All rights reserved. Copyright 2015 HONEYWELL INTERNATIONAL INC. All Rights Reserved 2

3 I. Introduction The Emergency Locator Transmitter (ELT) guides rescuers to aircraft in emergencies. An ELT must be programmed with a unique identification code to be transmitted in an emergency. The ELT Coding Form on Honeywell s Aerospace Software & Data Services (ASDS) website will help you in providing Honeywell with the data required to program your ELT. This user guide provides the instructions on how to access and fill the new and enhanced ELT Coding Form from Honeywell s Aerospace Software & Data Services (ASDS) website. II. Accessing ASDS 1. Type < in your browser and click ENTER to open the ASDS home page as shown below: 3

4 2. Alternatively, Type < in your browser and click ENTER. Click Aerospace Software & Data Services option from the Software & Data Menu to open the ASDS home page. III. Login to ASDS As an authorized user, you need to log in to ASDS website to download databases, subscribe, and purchase softwares. To log on to ASDS - On the ASDS Home page, in the Login section: 1. Type your Honeywell ID. 2. Type your Password. 3. Click Sign In. 4

5 Click Continue on the pop-up that appears (shown below). 4 NOTE If you do not have a Honeywell ID, click Register to create a Honeywell ID. If you forget your Honeywell ID, click the Forgot your ID? link and follow the onscreen instructions to retrieve your ID. If you forget your password, click the Forgot your Password? and follow the onscreen instructions to reset the password. To remember your ID on the computer, select the Remember my ID check box. However, selecting this checkbox is not recommended for shared systems. User ID Management helps to manage the user profile such as changing the 5

6 current password, retrieving forgotten password, retrieving User ID, viewing/editing account details, testing the account status. On successful log on, the ASDS Dashboard page appears, as shown below NOTE If you are a new ASDS user, after logging in, click Get ASDS Access to request access to the website. If you are an existing NavDB or EGPWS user, you are not required to request for additional ASDS access, as this is an extension of current ADS. 6

7 IV. Accessing ELT Coding Form 1. Post login, on the ASDS dashboard, click Service Request Forms 1 2. The Select a form type pop-up appears. Click Emergency Locator Transmitter (ELT) Coding Request Form 2 7

8 3. The My ELTs home page appears as shown below. Click Create New to create an ELT Coding Request 3 4. The Customer Info page appears as shown below. Enter your details. a. Click Next to proceed. b. Click Save to save your information without proceeding. 4 b a 8

9 c. Saved forms can be later accessed from the Drafts section. Click Edit to restart filling the form from where you saved. Click Delete to remove the record permanently. c 5. The Part Numbers page appears on clicking Next from the Customer Info page. a. Click to select your type of ELT Order b. Click to select one or multiple part numbers from the available list. c. Click to download the reference coding sheet PDF file. d. Click Back to go back to the previous section of Customer Info. a 5 b d c 9

10 6. The Coding page appears on clicking Next from the Part Numbers page. a. Select the total number of units for the part number from the drop down. b. Select the distribution of the units across protocol(s). c. If required, click to download the Product Description & ELT Tips documents 6 c a b d. Enter the field values as per the selected protocols and click Next. d 10

11 e. Click Submit Coding Instruction to confirm the selections and submit the details to Honeywell. e 7. On submitting the instructions, you would see a confirmation screen as shown below. Click My ELTs to go to home page

12 8. The My ELTs page appears. Here you can view the details of your submitted coding forms. 12