MADYMO Workspace. XMADgic Help

Transcription

1 MADYMO Workspace Copyright 2013 by TASS International All rights reserved

2 TASS International TASS International MADYMO/Workspace TASS International XMADgic XMADgic TASS International HF 3F support.jp@tassinternational.com TEL :

3 ... 6 XMADgic Editor Viewer MADYMO XMADgic File Edit View

4 / Options XMADgic MADYMO Execute MADYMO Validation Tools XML Hybrid III Q ID SURFACE.* FACET Viewer

5 Viewer Editor FE X Y Z Node ID Node ID Element ID Part ID Viewer Node / PSM Motion Animation ID ID BODY JOINT DEFINE

6 XMADgic XMADgic TASS MADYMO/Workspace 1 MADYMO XML Viewer XML Viewer MADYMO XML XMADgic MADYMO XMADgic XMADgic 6

7 XMADgic Editor Editor( ) Viewer Viewer XMADgic 7

8 Editor XML <> Element : <> Attribute : / ID NAME DESCRIPTION JOINT TYPE FILE R7.3 Editor Editor Viewer Editor 2 Editor Viewer TABLE Viewer COORDINATE.* COORDINATE_REF.* ELEMENT.* XY_PAIR MODE_SHAPE Viewer Viewer 8

9 XMADgic MADYMO Editor Editor Editor Above : Editor Below : Editor Child : Editor FUNCTION.XY LOAD_FUNC 2 1 Ctrl CHARACTERISTIC.* 1 : Editor CHARACTERISTIC.CONTACT 9

10 2 : BODY JOINT RESTRAINT Viewer : CRDSYS_OBJECT_1 POS local : CRDSYS_OBJECT_1 BODY CRDSYS_OBJECT_1 JOINT.REVO reference space : CRDSYS_OBJECT_1 JOINT.REVO Insert : local POS : CRDSYS_OBJECT_2 POS local : CRDSYS_OBJECT_2 BODY CRDSYS_OBJECT_2 JOINT.REVO reference space (child body) : CRDSYS _OBJECT_2 BODY 10

11 Editor Editor Editor New File (Ctrl+N) : MADYMO MADYMO_INCLUDE MADYMO_RESTART OTHER DTD MADYMO XML 11

12 Open File (Ctrl+O) : MADYMO XML FE CAD FE CAD Viewer : MADYMO IGES IGES 12

13 Reload File : MADYMO Save File (Ctrl+S) : MADYMO Print (Ctrl+P) : Selection only : Expand all elements : Wrap long lines : Print CDATA contents : TABLE #PCDATA Long tables : Do Nothing : Wrap : Shrink : Print : Setup : Preview : 13

14 Undo (Ctrl+Z) : Redo (Ctrl+Y) : Cut (Ctrl+X) : Copy (Ctrl+C) : Paste Below (Ctrl+V) :

15 Find (Ctrl+F) : Find : Search for : Search up : Search all : Search down : Options : Elements : Attributes : Check Values : Check Tags : Case sensitive : / Search in text field : TABLE #PCDATA Find Next : 15

16 Replace Value : Search for : Replace with : Replace : Replace all : Replace Attribute Value : Attribute : Current Value : Replace with : 16

17 View Reprint File (F5) : Editor View Log File (Shift+F5) : Editor 17

18 View Geometry (F9) : Viewer XMADgic Submit to MADYMO (F8) : MADYMO XMADgic MADYMO 33 Release Settings 34 Null Run : Submit : 18

19 Validate Document (F4) : DTD MADYMO XML MADYMO MADYMO Launch External Editor (F6) : 27 Launch Post Processor : Editor

20 Open MADYMO Manuals (Shift+F2) : MADYMO PDF 33 Release Settings Show Keyword Help (F2) : R7.3 Insert Angle in Radians : Degree Radian Rad Help (F1) : XMADgic XMADgic Hotkeys (Shift+F1) : 20

21 Editor Editor File XMADgic 21

22 Edit Paste Below (Ctrl+V) : Paste Above (Ctrl+Shift+V) : Paste as Child (Ctrl+Alt+V) : Editor : SYSTEM.MODEL Paste Above Paste as Child Paste Below 22

23 Move to Disable (Ctrl+D) : Move to Enable (Ctrl+E) : Disable Enable 23

24 View Viewer / Expand All Children : Collapse All Children : Expand Collapse 24

25 Toggle Table View (F12) : / Toggle Table View 25

26 Options XMADgic MADYMO XMADgic Options : XMADgic General Verbose output : XMADgic Show new model and refit graphics when changing files : Editor Viewer 26

27 Show extended information in Attributes window : Insert attributes in Fixed DTD Order : DTD Use native browser for viewing the help files : Use external editor for viewing the LOG and REP files : Start Tree View in fully tabulated mode : Automatically show Output window before starting a MADYMO run : MADYMO Clear Output window before starting a MADYMO run : MADYMO Automatically renumber uniquely when pasting an element : ID/NAME Set the current directory as the default Open File path at start : XMADgic Specify default tab in Elements window : XMADgic Specify action when executing a MADYMO run : Submit to MADYMO Maximum length of Value field in TreeView : Value Automatically perform a backup operation every : Specify external text editor : Specify external Diff tool : Diff Specify Post Processor : 27

28 Validation Validate include files : Perform Extended Validation : MADYMO Automatically validate after modification (Auto Validation) : Issue a warning when pasting an element/attribute to an illegal place : / Do Validation after Move to Enable / Move to Disable : Move to Enable / Move to Disable Issue warning when LIST attribute has value ALL and no references were found : LIST ALL Prompt with absolute reference paths : Show validation Warnings as Errors (i.e. show popup) : Validation Warning Report illegal INITIAL.JOINT_POS/VEL even if the value is 0.0 : INITIAL.JOINT_POS/VEL 28

29 Tree View Default Colours / Soft Table Colours Background : Editor Elements : Attributes : Comments : Process Instr : Empty Cell : Element Cell : Attribute Cell : Table Text : TABLE #PCDATA Set Tree Font : Hard Table Font : TABLE #PCDATA 29

30 Syntax Highlighting : Use syntax highlighting in text : Use syntax highlighting in soft-tables : Editor Attributes Background Elements Attribute Cell Syntax Highlighting Element Cell Empty Cell Set Tree Font Hard Table Font 30

31 Graphics View Graphical View - Colours Background Colour : Viewer Graphical View - Display Perspective : Function View Specify number of points to use in SPINE representation : Show(frist)derivative of SPINE_5 interpolated function : SPLINE_5 Show second derivative of SPINE_5 interpolated function : SPLINE_5 31

32 Advanced Mapped network drives : Windows/Linux PATH Show contents of INCLUDE files in Tree View : Horizontal Indentation in Tree View : Item Height in Tree View : Use additional INCLUDE path : 32

33 MADYMO Release Settings : XMADgic MADYMO MADYMO XMADgic MADYMO DTD XMADgic XMADgic MADYMO MADYMO Release Tag : MADYMO MADYMO Install Directory : MADYMO DTD Directory : DTD MADYMO Executable : MADYMO Remove : New : Done : 33

34 Execute MADYMO MADYMO MADYMO 18 Terminate MADYMO run (Alt+F8) : MADYMO MADYMO 34

35 Validation DTD 19 Validate Subtree : Editor Select User Rules : TASS Predefined Rules : TASS Available Rule Sets Selected rules Selected Rules 35

36 Custom Rules : Filter : Rule Description Rule Description : Load : Save Save : Predefined Rules Custom Rules Selected rules Settings : Custom Rules Add : Remove : 36

37 Refresh : Execute User Rules (F7) : 37

38 View Rule Validation Report (shift+f7) : HTML Web 38

39 Tools MADYMO Diff XML JPS Hybrid III Q / ID SURFACE.* FACET 39

40 Belt Fitting (F10) : FE FE FE Select the FE belt model to fit : FE FE model : FE Create New Belt : FE 40

41 Create a new FE belt mesh : FE System : SYSTEM_MODEL SYSTEM.MODEL FEM Name : FE_MODEL Element type Membrane Element strips : Belt widths : Element thickness : Belt attachments : FE MB Belt end : FE Rigid end elements : FE SUPPORTed at one side : MB Truss Approximate element length : Element cross-sectional area : Create MATERIAL definitions with recommended default values : MATERIAL.HYSISO 41

42 Set the belt start attachment point : Select Start Attachment point : POINT_OBJECT.MB Create New point : POINT_OBJECT.MB Create a new attachment point : POINT_OBJECT.MB Point Name : POINT_OBJECT.MB Position * mm (in Body CS) : BODY POINT_OBJECT.MB : mm Attached to : POINT_OBJECT.MB 42

43 System : SYSTEM.MODEL Body : BODY Set the belt end attachment point : Select surfaces : FE 43

44 Modify belt : Start MB Belt Length : MB Belt Midpoint Offset : MB FE Belt Midpoint Position : FE 1 End MB Belt Length : MB Use gap of : FE FE Belt Width : FE Straighten lap belt : Allow remeshing with : Default, Swapped, Chequered Default mesh : Swapped mesh : Chequered mesh : Back : (Re)fit : Finish : Cancel : 44

45 : Belt Midpoint Position 100mm ( ) Midpoint Position( ) ( ) 3 FE 100mm 45

46 Joint Positioning (F11) : System Model : SYSTEM.MODEL Joint : SYSTEM.MODEL MOTION.JOINT_POS SYSTEM.MODEL Viewer Reset : D*, R* : Viewer INITIAL.JOINT_ POS Reset : Translation Settings, Rotation Settings Increment : 1 Unit : OK : Cancel : 46

47 Translate Release : Translate to : Recursive Translate (INCLUDE Files) : Reformat XML : XML TABLE XML 5 COORDINATE.* COORDINATE_REF.* ELEMENT.* XY_PAIR MODE_SHAPE : TABLE BODY.RIGID JOINT.BRAC XML XML 47

48 Import Foreign Code : FE PAM-CRASH LS-DYNA RADIOSS MADYMO XML LS-DYNA RADIOSS Element Part Node PAM-CRASH Perl 48

49 Import INITIAL.JOINT_POS : MAD : jps HDF5 : h5 INITIAL.JOINT_POS INITIAL.JOINT_POS File name : Joint Selection : Time Specification : Back : Import : Ok : Cancel : 49

50 Q-HIII Spine Angle Calculator : Hybrid III Q Hybrid-III 50th Facet Q Lumbarspine spinebox - pelvis Q Spine Numerical Model angle between the pelvis and spinebox : ~ 0.14 [rad] 50

51 Switch to Absolute Reference : Switch to Relative Reference : Absolute Relative Go to Reference : Editor 51

52 Create Referenced Element : 52

53 Replace Mathematical Expressions : Replace (MASS_SPECIFIC = #Belt_density*#Belt_width*#Belt_thickness = ) 53

54 Enter Encryption Key: 8 16 Encrypt Selection Decrypt Selection Encrypt Decrypt 54

55 Create INCLUDE file : Expand INCLUDE file : Create Expand Renumber Uniquely : ID ID ID 55

56 Rename and Update References : : SYSTEM.MODEL NAME Vehicle Car NAME 46 Change Subclass : : JOINT.* 56

57 Mesh Surface : SURFACE.* FACET SURFACE.* Ellipsoid Cylinder Plane FACET FACET FE_MODEL SURFACE SYSTEM.* Surface Specification Surface Name : FE_MODEL Semi Axis : Degree : Mesh Density : Remove Original Surface : SURFACE.* Browse for Filename : 57

58 Viewer Viewer Viewer Display Settings : Viewer Graphical Representations : 58

59 Display Draw Style Off : On : Joint Restraint Solid : Wireframe : Solid+Wireframe : Transparent : Display Properties Line Width : Axis Length : Coordinate System Y Display Normal : Plane Triad Quad Normal Length : Coarse <-> Smooth : Surface Scale Factor : Joint Radius : Point COG Point Object Colour : 1 : Plane 59

60 2 : FE 3 : Viewer ID 60

61 4 : Viewer Viewer Camera Throwing : Background : Viewer 61

62 Link Geometry and Text Views : Viewer Editor Editor Viewer Viewer Editor Editor CONTACT.* Viewer MASTER_SURFACE SLAVE_SURFACE 1 : Editor SYSTEM.MODEL 2 : Editor CONTACT.MB_FE SLAVE_SURFACE MASTER_SURFACE 62

63 Select Model : XMADgic Viewer CAD DYNA Radioss Viewer Model State : Viewer Delete Overlay : Position Overlay : 63

64 Clip Model : Model Clipping : Graphical ClipBox Options : Enabled : Parallel to Screen : X Visible : Viewer Colour : Clipbox Bounds : X Y Z Min * : Max * : Stepsize : 1 Lock *-Width : Min Max Graphical : Viewer Alt +C ClipBox Rotation : : degree 64

65 Colour : FE FE 4 Colour by PART : PART Colour by FE_MODEL : FE_MODEL Colour FE by SYSTEM_MODEL : SYSTEM_MODEL Colour by Element Type : Element type Viewer PART FE_MODEL SYSTEM_MODEL Element Type Fit View : Viewer Isometric View : X View : X Y View : Y Z View : Z 65

66 Projection View : 4 Viewer 4 X Y Z ISO view X Y Z view ISO view View View : Z View Iso View Y View X View Measure Distance : 2 2 X Y Z Viewer Measure Angle : 3 3 XY YZ ZX Viewer 66

67 ID Highlight and Snap : Node ID Node ID Viewer : Node IDs : Node ID Elem IDs : Element ID Part IDs : Part ID PART Node Element Part ID ID : Node ID Element ID 67

68 Selector : Viewer Viewer Node Element Part NODE_LIST ELEMENT_LIST PART_LIST Insert selected NODEs Insert selected ELEMENTs Insert selected PARTs Node Element Part ID Node Element Part Ctrl 1 : Viewer Element Editor PART_LIST NODE_LIST ELEMENT_LIST NODE_LIST ELEMENT_LIST PART_LIST Element Selection NODE_LIST Node Element Node Element Part Selection NODE_LIST Node Part ELEMENT_LIST NODE_LIST PART_LIST Part Selection ELEMENT_LIST Element Part 68

69 Joint Manipulation Selection INITIAL.JOINT_POS 2 : Viewer 3 : JOINT.FREE(Dummy_jnt) 69

70 Node Positioning : Node Viewer Node selection Node Node Selection Node Node Positioning Node

71 Enter 71

72 Perspective On/Off : Steady Camera / Trackball Toggle : Select All : Viewer Unselect All : Viewer Reverse Selection : / 72

73 Advanced Selection : Entity Type Entity Select By : Entity Type : Group : Entity Selection Entity : Find Entity : / Entity Create/Update Group : Entity Delete Group : Display On : Display Off : / 73

74 Wireframe : Solid : Solid + Wireframe : Transparent : : Colour Settings : 74

75 Capture Screen : Viewer Output : White Background : Include Pane Title and Time : View Format Image : Viewer Movie : CONTROL_ANALYSIS.TIME START_TIME END_TIME CONTROL_OUTPUT TIME_STEP_ANI PSM MPEG High Resolution Filename : Capture : Preview : 75

76 Motion animation : PSM PSM MOTION.JOINT_POS MOTION.STRUCT_DISP MOTION.NODE_DISP : MOTION.NODE_DISP 76

77 Animation Settings : Motion Animation Motion Animation Time Start Time : CONTROL_ANALYSIS.TIME START_TIME End Time : CONTROL_ANALYSIS.TIME END_TIME Speed : 0 20 : Use Every _ Time Interval : CONTROL.OUTPUT TIME_STEP_ANI _ Bounce : / Reverse : 77

78 Editor Renumber and update references : ID ID ID ID ID Go to parent JOINT : BODY JOINT Editor BODY.RIGID BODY.RIGID JOINT CRDSYS_OBJECT_2.MB BODY 78

79 Create DEFINE : DEFINE DEFINE CONTROL_ANALYSIS.TIME DEFINE 79

80 Viewer - - SHIFT + CTRL CTRL : : 80