Programming the FDS-SYS1X Interface card in ProSim737:
|
|
- Garey Dean
- 5 years ago
- Views:
Transcription
1 Programming the FDS-SYS1X Interface card in ProSim737: Programming the FDS-SYS1X card for use with the ProSim737 software is not so difficult as it looks. In this example, I will program the Aft 1 Fuel pump and the corresponding light on the overhead panel. Before you can start assigning buttons and lights, you need to set some options in the ProSim configuration page. Start the ProSim737 software and open the configuration page.
2 Now open the Drivers Tab. Here you can set some options. Make sure you select Project Magenta Offsets and FSUIPC support. In case you also work with Opencockpits cards, make sure you enter the IOCP server address and port used by SIOC. You can find this address when you start SIOC. While you are in the drivers tab, you can also set some other options like Flight Illusion com port, directiput support for joysticks and so on. Press OK so ProSim accepts these settings. Ok, now for the example, we need the Project Magenta offset for the Aft 1 Fuel pump switch and light. You can find all necessary offsets in the documentation of Project Magenta. In case of our example: Switch offset: 56B1 Bit 2 Light offset: 56B0 Bit 2 We start with the most easy part of the process to program our switch and light.
3 Again open the configuration page of ProSim737 and select the Switches tab. Now scroll down to where you ll find the Fuel Left Aft setting. You ll notice that there are two setting for Fuel Left Aft. On and Off. The one you need depends on how your switch is placed in the overhead panel. You should know when the contact is made. If you place the switch up or down. Lets assume that the contact is made when you put the switch down. In that case we re going to use Fuel Left Aft On. Ok, now select FSUIPC 8 bit U for the Fuel Left Aft On setting. You ll notice that there is an extra space available now. Put the necessary offset in this box so for our example it will be offset 56B1. Attention, this is not enough information for ProSim. It also needs to now the bit number. We can put it in the box this way: 0x56B1.2 so it is 0x56B1(dot)2 Well, that s all for the switch.
4 Now select the Indicators tab and scroll down to the Fuel Left Aft LP setting. Just like in the switch section, select U Bit 8 and enter the value of the Fuel Left Aft Low Pressure offset. In this example, it is 56B0 Bit 2. Again, we can enter it in the bow like this: 0x56B0.2 so it is 0x56B0(dot)2 Now press OK to confirm and that s all for the ProSim software. You see not so difficult at all. Ok, now lets move on to the InterfaceIT software. Startup the software. Your interface card should be recognized by the software.
5 The best is to turn on the option to locate the input mode. Now turn on the Aft 1 Fuel pump on your overhead panel and locate the switch in the InterfaceIT software. Now you can see that I programmed two actions for this switch. The names are not important. The most important part here are the arrows pointing up and down. In my case here action 3 is executed when I turn the switch down.
6 Now you have two options. You can program the switch by selecting the Project Magenta function from a list and assign the bit action or you can download a set of xml files where those functions already have been programmed. I noticed that not every functions of the overhead panel is listed in this downloadable list so I start with the most difficult way to do it. Right-click on the name of the switch you want to program. Select Add input action Update pmsystems On/Down. You now can see this screen:
7 If you start programming, the right screen will be empty. Now open the list by clicking on the icon in the right screen. Now you can search for the function you need for the switch. In our example it is Aft1Pump. To see more details of this function, press Detail. Here you can find the PM offset. 56B1 bit 2. Select the function and you come back in the previous screen. Now you can set what needs to be done when the switch is moved down. In our example it need to set the bit so ProSim knows that the function is activated.
8 The first action has been programmed. Now we do the same for the up-movement of the switch. The only difference now is that we need to clear the bit. That s all for the switch actions.
9 Now we can program the indicator. Select the indicator of the fuel pump. Again right-click on the name of the indicator and proceed as with the switch, but select output action. Select the function in the right screen. In our example it will be Aft1PumpFault. Once selected, the switch and indicator is programmed. You can now save the configuration and test both InterfaceIT and ProSim737. Another way to program the switches and indicators I Told before that there is another way to program the switches and indicators. To do this, we need to start by downloading the import files. The next window will open.
10 Select a download path where you can put all the files you will download. Next select the B737NG Tab. Here you will find all functions of project magenta. Select all the files and push on download. All the files will be put in the download path you did choose before. Repeat this action for both input and output files. Ok, we go back to the switch we like to program.
11 Right-click on the switch and select Import configuration. You can choose whether the name of the switch may be overwritten or not. It s your choice. Now you can open the folder where you downloaded the xml files before.
12 For our example, double click on B737NG-I-Aft1Pump. The I after B737NG means that this file is intended to program an input. This is all that has to be done to program the switch. Two actions will be added. The same actions like the one you programmed in the previous method. Now we can continue with the indicator. Again select Import configuration. Now select the output file. For our example we choose B737NG-O-Aft1PumpFault. Notice the O in the script to program an output.
13 All is done. Both switch and indicator is programmed and you can go testing it. Good luck and have fun. Gert.
Connecting Opencockpits modules in ProSim737
Connecting Opencockpits modules in ProSim737 Introduction page 2 SIOC script file page 3 SIOC.INI file page 4 Connecting your MCP page 5 Connecting your first EFIS page 11 Connecting your second EFIS page
More informationConnecting Opencockpits modules in ProSim737
Connecting Opencockpits modules in ProSim737 Introduction page 2 SIOC script file page 3 SIOC.INI file page 4 Connecting your MCP page 5 Connecting your first EFIS page 11 Connecting your second EFIS page
More informationINSTALLATION MANUAL FOR USING YOUR THROTTLE V3. Version
INSTALLATION MANUAL FOR USING YOUR THROTTLE V3 Version 1.6.40 23. Aug. 2 0 1 7 w w w. c o k c p it f o r y o u. c o m To r s t en M ü ll e r Installation manual for using your TQ Thank you for purchasing
More informationB737 NG MOTORIZED THROTTLE SETUP MANUAL PROJECT MAGENTA. Revolution- Simproducts. All Rights Reserved
B737 NG MOTORIZED THROTTLE SETUP MANUAL PROJECT MAGENTA Revolution- Simproducts All Rights Reserved January 9, 2010 1 CONTENT INTRODUCTION...3 REVISION LIST...4 Installation for PM without any previous
More informationC A T I I S y s t e m a n d F S X. S e t U p G u i d e
C A T I I S y s t e m a n d F S X S e t U p G u i d e Preface This setup guide will walk you through the necessary steps to setup your CAT II System with Microsoft Flight Simulator X. For connection diagram,
More informationOpencockpits Modules (OCM) Manual
Opencockpits Modules (OCM) Manual for the Level-D 767 Version 10.6.2, February 25, 2015 for Windows Vista, or higher Copyright 2007-2015, Nico W. Kaan, Delft, Netherlands, All Rights reserved. No part
More informationProfessional Simulator Suite. User Manual version 1.0. ProSim Aviation Research B.V. Rotterdamseweg 388D 2629 HG Delft The Netherlands
ProSimA320 Professional Simulator Suite User Manual version 1.0 ProSim Aviation Research B.V. Rotterdamseweg 388D 2629 HG Delft The Netherlands Website: www.prosim ar.com Email: info@prosim ar.com Phone:
More informationV737 Overhead. VRinsight
VRinsight Contents 1. Introductions 1.1 General.... 1.2 Features... 2. Deliverables 3. Hardware Connection 3-1. and wing stand assembly... 3-2. USB / POWER / LED connection. 4. Software installation 4-1.
More informationJetMax Throttle Installation Instructions
JetMax Throttle Installation Instructions 1 The JetMax 737 Throttle unit is designed to bring our customers a highly realistic looking device that covers all the basic requirements needed! Features Include:
More informationP r e c i s i o n F l i g h t C o n t r o l s, I n c. S e r i a l C A T I I I a n d F S X S y s t e m S e t u p G u i d e
P r e c i s i o n F l i g h t C o n t r o l s, I n c. S e r i a l C A T I I I a n d F S X S y s t e m S e t u p G u i d e (Shown with optional Garmin 430) Preface This setup guide will walk you through
More informationBLUETOOTH. AMPRO 2000 / OPTIMA 7 Using Bluetooth with the MRU4u app
BLUETOOTH 1 P a g e This app is available for both Android and ios. Download the MRU4u app from the Play-store or APP-store. 2 P a g e INDEX: Analyzer Bluetooth settings 4 Android phone Bluetooth connection
More informationHP Color LaserJet CM3530 MFP Series Fax
Fax my scan Send a fax 1 Place the original face-up in the document feeder or face-down on the glass. 2 Touch Fax. If prompted, type your user name and 3 Touch Fax Recipients. Enter a fax number. Touch
More informationDownloading of Tender Documents on BEML SRM System
Downloading of Tender Documents on BEML SRM System Please use Internet Explorer Version 11. Open Internet Explorer 11 and look for Menu Bar on the top as shown below. In case Menu Bar is not visible, please
More informationPrinter Settings. Accessing Power Saver. Selecting Output Options. Phaser 5500 Laser Printer
Printer Settings This topic includes: "Accessing Power Saver" on page 1-13 "Selecting Output Options" on page 1-13 "Preventing Access to Front Panel Settings" on page 1-14 "Accessing the Startup Page"
More informationCONFIGURATOR SOFTWARE (S009-50) Quick start guide
P a g e 1 CONFIGURATOR SOFTWARE (S009-50) Quick start guide 1. Download the Configurator Software from our website http://www.mo-vis.com/en/support/downloads 2. Connect the mo-vis Joystick or Multi Swing
More informationS e r i a l T h r o t t l e Q u a d r a n t C o n s o l e S e t u p G u i d e W i t h M i c r o s o f t F l i g h t S i m u l a t o r X
S e r i a l T h r o t t l e Q u a d r a n t C o n s o l e S e t u p G u i d e W i t h M i c r o s o f t F l i g h t S i m u l a t o r X Preface This setup guide will walk you through the necessary steps
More informationIOCards USB Axes Manual. Date:15/03/12 Rev.:2.0
Date:15/03/12 Rev.:2.0 Index: IOCARDS USB AXES MANUAL... 1 INDEX:... 2 INTRODUCTION:... 3 USBAXES:... 3 Outline and components:... 3 Description of connectors:... 3 CONNECTION OF THE PUSHBUTTONS:... 3
More informationAttaching Codesoft 6 to an ODBC Database
Attaching Codesoft 6 to an ODBC Database 1. From your Main Menu Options, go into Merge then Create ODBC query. The following Dialog Box will appear. 2. Select the button with 3 dots ( ) on it. 3. The Data
More informationIOCards USB Axes Manual. Date:12/23/14 Rev.:2.2
Date:12/23/14 Rev.:2.2 Index: IOCARDS USB AXES MANUAL... 1 INDEX:... 2 INTRODUCTION:... 3 USBAXES:... 3 Outline and components:... 3 Description of connectors:... 3 CONNECTION OF THE PUSHBUTTONS:... 4
More informationWindows. 7 Tips and Tricks
Windows 2012 7 Tips and Tricks This document contains many of the hidden features of Windows 7 to assist in making many tasks accomplished in Windows much easier. Feel free to distribute this document.
More informationGet started with SketchUp!
Get started with SketchUp! SketchUp is a popular design program you can download for free from the SketchUp website: www.sketchup.com. If you haven t used SketchUp before, these instructions will get you
More informationFDS-PRO-MX-CDU/MCDU 2013 Ver 1.6 Page 1
FDS-PRO-MX-CDU/MCDU 2013 Ver 1.6 Page 1 INDEX Features... 3 Compatible Software List... 4 FDS-CDU Software Modules and Setup... 7 Sim-Avionics Setup...11 NAV DATA...16 Air Sim Tech (AST) Setup...17 Project
More informationerequest How to apply guide
Overview is an application that assists UCB in request life cycle management. UCB has clear guidance in place on what they can support or sponsor. Online requests will go through an internal review and
More informationBarchard Introduction to SPSS Marks
Barchard Introduction to SPSS 21.0 3 Marks Purpose The purpose of this assignment is to introduce you to SPSS, the most commonly used statistical package in the social sciences. You will create a new data
More informationTube Washing Upgrade Guide. for Epson SureColor F2000
Tube Washing Upgrade Guide for Epson SureColor F2000 2016 guides.equipmentzone.com Page 1 of 14 Part 1 -How to Upgrade Epson F2000 Firmware Open your internet browser Select address bar located up top
More informationBarchard Introduction to SPSS Marks
Barchard Introduction to SPSS 22.0 3 Marks Purpose The purpose of this assignment is to introduce you to SPSS, the most commonly used statistical package in the social sciences. You will create a new data
More informationP r e c i s i o n F l i g h t C o n t r o l s, I n c. S e r i a l C A T I I I S y s t e m a n d F S S e t u p G u i d e
P r e c i s i o n F l i g h t C o n t r o l s, I n c. S e r i a l C A T I I I S y s t e m a n d F S 2 0 0 4 S e t u p G u i d e Preface This setup guide will walk you through the necessary steps to setup
More informationParallel Printers Set-Up
Parallel Printers Set-Up - 25 - Setting up a Local Parallel Printer in Windows 95/98 Left click on the START button. Go to SETTINGS, and then PRINTERS. 1. Locate and double left click on the ADD PRINTER
More informationGetting Started with Keil µvision 3 and C51
Getting Started with Keil µvision 3 and C51 1. Create a Project: Start uvision3. Go to Project->New µvision Project on the µvision3 window. Then enter the name of your project and select a location. Click
More informationDreamweaver Publishing and Editing Files. Outline
Outline Before you begin... 1 Important Note... 1 Location of Files in Dreamweaver... 2 Local and Remote Files... 2 Local view... 2 Remote View... 2 Publish a entire Brand New Site... 3 Dependent Files
More informationCreated by Neevia docuprinter LT trial version
Quick Start Guide to Using Upstart By Web Mountain Technologies When UPB modules are shipped, right out of the box, some devices will work together. For example, all wall switches are programmed to respond
More informationMicrosoft Word - Starting the Mail Merge Wizard
Microsoft Word - Starting the Mail Merge Wizard Starting the Mail Merge Wizard. 1. Select the Mailings tab. 2. Click the Start Mail Merge button 3. Select Step by step Mil Merge Wizard. 4. Select the type
More information2. create the workbook file
2. create the workbook file Excel documents are called workbook files. A workbook can include multiple sheets of information. Excel supports two kinds of sheets for working with data: Worksheets, which
More informationPC Agent Quick Start. Opening the Agent. Logging in to the Agent. Connected Backup. Version 8.6. Revision 0
T E C H N I C A L N O T E Version 8.6 PC Agent Quick Start Revision 0 Use this document as a quick reference for common Connected Backup PC Agent tasks. If the Agent is not on your computer, contact your
More informationIn this exercise, you ll create a netcdf raster layer using the variable tmin. You will change the display by selecting a different time step.
Learning to Work with Temporal Data in ArcGIS Working with a netcdf File in ArcGIS Objective NetCDF (network Common Data Form) is a file format for storing multidimensional scientific data (variables)
More information2012 Lenovo Server Client Performs All Steps from ISP Machine 1. Check the ISP CD/DVD drive and remove any disks that are currently loaded.
2012 Lenovo Server Client Performs All Steps from ISP Machine 1. Check the ISP CD/DVD drive and remove any disks that are currently loaded. 2. Log onto the Windows side of the ISP and go to the QsrSoft
More informationOpencockpits Modules (OCM) Manual
Opencockpits Modules (OCM) Manual for PSX Version 1.1, March 27, 2018 for Windows Vista, or higher Powered by PSXseecon Copyright 2015-2018, Nico W. Kaan, Delft, Netherlands, All Rights reserved. No part
More informationFSUIPC Basics. The basics on how to assign flight simulator functions to buttons, switches and axis.
FSUIPC Basics The basics on how to assign flight simulator functions to buttons, switches and axis. Flight simulator can be so much more realistic if we could assign more realistic functions to buttons,
More informationYou are going to code your micro:bit to read the future! Simply ask the micro:bit a quesition, and press a button to find out the answer!
Fortune Teller Introduction You are going to code your micro:bit to read the future! Simply ask the micro:bit a quesition, and press a button to find out the answer! Step 1: Scrolling text Let s start
More information3 Starting the chiral HPLC and logging into LC Real Time Analysis.
Edition: 1.2 Date: 7-Oct-11 Page 1 of 5 1 Responsibilities. First person responsible: Mariëlle Delville. Second person responsible: Helene I.V. Amatdjais-Groenen. 2 Definitions. Read the information on
More informationCounty of Sacramento Instructions for filling out an online Tree Permit
To start your permit 1. Create an account or log in if you already have an account. https://actonline.saccounty.net 2. Click on Apply for a Tree Permit Or in you already have a tree permit you can search
More information737 NG TQ Pro / Motor
WELCOME TO 737 NG TQ Pro / Motor Version 1.2.9 December 2017 INDEX 1 INTRODUCTION 2 INSTALLATION 3 USING THE TQ IN X-PLANE 4 USING THE TQ IN FS9, FSX, ESP AND Prepar3D 5 CONFIGURING TQ THROTTLE FOR FIRST
More informationMySQL DOWNLOAD & INSTALLATION GUIDE
MySQL 5.7.7 DOWNLOAD & INSTALLATION GUIDE TABLE OF CONTENTS Introduction... 1 Downloading MySQL 5.7.7 Installer... 3 Account Registration... 3 Logging into MySQL Website... 5 Downloading the Installer...
More informationStep 7 How to convert a YouTube Video to Music As I mentioned in the YouTube Introduction, you can convert a Video to a MP3 file using Free Video To
Step 7 How to convert a YouTube Video to Music As I mentioned in the YouTube Introduction, you can convert a Video to a MP3 file using Free Video To MP3 Converter program. Next I will show you how to download
More information5.5.3 Lab: Managing Administrative Settings and Snap-ins in Windows XP
5.5.3 Lab: Managing Administrative Settings and Snap-ins in Windows XP Introduction Print and complete this lab. In this lab, you will use administrative tools to monitor system resources. You will also
More informationAuthorizing the TCP/IP protocol
Authorizing the TCP/IP protocol If you purchased TCP/IP capability initially with the printer, the printer is shipped with the protocol already authorized. If you are adding TCP/IP capability to your printer,
More informationProJet 3600 ProJet 35X0
ProJet 3600 ProJet 35X0 Professional 3D Printers Release Notes ProJet 3600 firmware version 6.3.7972 ProJet 35X0 firmware version 5.9.7889 3D Modeling Accelerator 5.9.7973 305710-N01-33 Rev A Firmware:
More informationSerial Adaptor Isolated USB to TTL Device Driver - Installation Guide 1 Introduction. 2 Installing the Device Driver Software (Windows XP )
Serial Adaptor Isolated USB to TTL Device Driver - Installation Guide 1 Introduction This installation guide describes a simple, step-by-step procedure to enable the supplied Serial Adapter to work using
More informationRadiology Associates - Office Computer Set-Up Guide
1. Open (version 11.0 or higher) or Chrome. Type in the following web address into the browser. https://rapapacs.radresults.org/synapse 2. Type in your provided user name and password Page 1 3. Left clink
More informationI / PM Express Imaging and Process Management Web Express. User Guide EWU s Web based Document Imaging solution
I / PM Express Imaging and Process Management Web Express User Guide EWU s Web based Document Imaging solution It is important to make sure you Log Out or close the Oracle IPM web client when not in use.
More informationSTORYTELLER READYTHEME CUSTOMIZATION
STORYTELLER READYTHEME CUSTOMIZATION Updated August 2016 Installing the Storyteller ReadyTheme These instructions are for installing the Storyteller ReadyTheme to a brand new store. If you have an existing
More informationInstructions for Exporting Cart Data and Uploading Inpatient Clinical Data to Qualitynet Updated November 6, 2013
Instructions for Exporting Cart Data and Uploading Inpatient Clinical Data to Qualitynet Updated November 6, 2013 The process for submitting your Inpatient Clinical Data from CART to the Inpatient Clinical
More informationWindows 2000 Safe Mode
LAB PROCEDURE 29 Windows 2000 Safe Mode OBJECTIVES 1. Restart and try various startup options. RESOURCES Troubleshooting 1. Marcraft 8000 Trainer with Windows 2000 installed 2. A PS2 mouse 3. A LAN connection
More informationTip 002: Configuring EDRMS Content Manager
Tip 002: Configuring EDRMS Content Manager Primary Audience: Information Workers Purpose: EDRMS Content Manager needs to be configured the first time you use it, or if you change your desktop computer
More informationHow to Apply for a Classified as an Internal Applicant
How to Apply for a Classified as an Internal Applicant I. Website Navigation To apply as an internal applicant from the Greenville County Schools website, click on the Employment tab and choose How to
More informationImmotec Systems, Inc. SQL Server 2008 Installation Document
SQL Server Installation Guide 1. From the Visor 360 installation CD\USB Key, open the Access folder and install the Access Database Engine. 2. Open Visor 360 V2.0 folder and double click on Setup. Visor
More informationWe want to make your transition from the AIA Contract Documents desktop software to the online version as smooth as possible. Below you ll find important transition resources - feel free to share them
More informationB737 V3. CDU s Manual. Fecha:19/07/12 Rev.:1.0
Fecha:19/07/12 Rev.:1.0 Index: B737 V3. CDU S MANUAL... 1 INDEX:... 2 INTRODUCTION:... 3 FMC B737 V3:... 3 SPECIFICATIONS:... 3 APPEARANCE AND MEASURES:... 3 DESCRIPTION OF THE CONNECTORS:... 4 STARTUP
More informationLab - Monitor and Manage System Resources in Windows 7 and Vista
Lab - Monitor and Manage System Resources in Windows 7 and Vista Introduction In this lab, you will use administrative tools to monitor and manage system resources. Recommended Equipment The following
More informationWELCOME TO. 737 NG TQ Pro Motor. Version May 2015
WELCOME TO 737 NG TQ Pro Motor Version 1.2.4 May 2015 INDEX 1 INTRODUCTION 2 2 INSTALLATION 3 3 USING THE TQ IN X-PLANE 5 4 USING THE TQ IN FS9, FSX, ESP AND Prepar3D 6 5 CONFIGURING TQ THROTTLE FOR FIRST
More informationMicrosoft Word - Templates
Microsoft Word - Templates Templates & Styles. Microsoft Word come will a large amount of predefined templates designed for you to use, it is also possible to download additional templates from web sites
More informationStep by Step Instructions for Using TestGenerator to Import Test Questions into Moodle
Step by Step Instructions for Using TestGenerator to Import Test Questions into Moodle 1. Open Test Generator by double clicking on TestGenerator Icon. 2. Choose A Test for the Web option. Choose A Test
More informationIf this is the first time you have run SSMS, I recommend setting up the startup options so that the environment is set up the way you want it.
Page 1 of 5 Working with SQL Server Management Studio SQL Server Management Studio (SSMS) is the client tool you use to both develop T-SQL code and manage SQL Server. The purpose of this section is not
More informationMicrosoft Office Outlook 2007: Intermediate Course 01 Customizing Outlook
Microsoft Office Outlook 2007: Intermediate Course 01 Customizing Outlook Slide 1 Customizing Outlook Course objectives Create a custom toolbar and customize the menu bar; customize the Quick Access toolbar,
More informationThis Reporting Fragment will be sown on the Business Entity Details screen within OpenPages.
Add a Reporting Fragment to an Object This KB article was written on the back of creating a reporting fragment and associating it to an object on a Windows 64bit install of OpenPages 6.0.1. Prior to adding
More informationTECHNICAL TRAINING LAB INSTRUCTIONS
In this lab, you are going to add some batch fields for associating batch-level data with every document in your batch. You will learn how to configure and test an optical mark recognition (OMR) zone for
More informationPOS Access to Items. Version Prepared by: Tihan du Plooy. Softcon Software Control Services (Pty) Ltd.
POS Access to Items. Version 0. 1 Prepared by: Tihan du Plooy Softcon Software Control Services (Pty) Ltd. 7 March 2017 Revision History Name Date Reason For Changes Version TDP 14/03/16 Initial document
More informationS600 Transferring Parameters
S600 Transferring Parameters A typical need is to transfer parameter settings from one drive to its replacement/spare.this could be from a file that is already archived or there may be a need to upload
More informationUsing Lloyd s Direct Reporting. User Guide
Using Lloyd s Direct Reporting User Guide AUGUST 2013 2 Contents CONTENTS 2 LLOYD S DIRECT REPORTING 3 ABOUT THIS SERVICE 3 FURTHER HELP AND SUPPORT 3 USER GUIDE 4 ACCESSING LLOYD S DIRECT REPORTING 4
More informationSection 1-3A: Creating a hierarchically numbered list style
Section 1-3A: Creating a hierarchically numbered list style The key to making automatically numbered headings is to create a numbered list style and then link it to the relevant Heading styles. Here we
More informationFor TurboTax On-line Users:
Colorado State Amend Instructions: NOTE: If using TurboTax on-line, follow these instructions. If using TurboTax CD/Download, scroll down to the TurboTax CD/Download instructions. For TurboTax On-line
More informationRecommended Maintenance Plan for Siriusware Clients for SQL server 2005
Recommended Maintenance Plan for Siriusware Clients for SQL server 2005 PURPOSE The purpose of this document is to describe how to automate the periodic rebuilding of indexes for the SiriusSQL database.
More informationCalendar Guide: Exchange (Outlook) -> Google. How to manually transfer your Exchange (Outlook) calendar over to Google Calendar
Calendar Guide: Exchange (Outlook) -> Google How to manually transfer your Exchange (Outlook) calendar over to Google Calendar Do I need to do this? If you don t care much for your old calendar events
More informationFor TurboTax On-line Users:
Maryland State Amend Instructions: NOTE: If using TurboTax on-line, follow these instructions. If using TurboTax CD/Download, scroll down to the TurboTax CD/Download instructions. For TurboTax On-line
More informationamaysim Guide to Mobile Internet Settings and MMS for Windows 6.5
amaysim Guide to Mobile Internet Settings and MMS for Windows 6.5 Here s a guide to set up your Windows mobile 6.1 or 6.5 internet connection and MMS. Just follow these easy steps. Before you start, you
More informationUsing the Hotwire Anemometer
Using the Hotwire Anemometer This documents tells you how to use the anemometer and its software. The software comes in a CD that is inside of the Anemometer's case. There is also an instruction manual
More informationProJet 3600 ProJet 35X0
ProJet 3600 ProJet 35X0 Professional 3D Printers Release Notes ProJet 3600 firmware version 6.3.8305 ProJet 35X0 firmware version 5.9.7889 3D Modeling Accelerator 5.10.8329 305710-N01-34 Rev A Firmware:
More information3M Temperature Logger TL20/TL25 - Software Installation Guide
3M Temperature Logger TL20/TL25 - Software Installation Guide Please follow this procedure to install the TL series software correctly on a personal computer (PC). You have the choice to download the software
More informationQuickBooks for Windows Conversion Instructions
QuickBooks for Windows Conversion Instructions QuickBooks Windows 2011-2014 Web Connect to Direct Connect Table of Contents TABLE OF CONTENTS... 1 INTRODUCTION... 2 DOCUMENTATION & PROCEDURES... 2 Task
More informationStep-by-step guide to install MAYA software and to reflash a GET ECU
Step-by-step guide to install MAYA software and to reflash a GET ECU The maps are available when purchasing the software and are included inside the USB key. They must be copied inside your PC/Laptop as
More informationImmotec Systems, Inc. SQL Server 2008 Installation Document
SQL Server Installation Guide 1. From the Visor 360 installation CD\USB Key, open the Access folder and install the Access Database Engine. 2. Open Visor 360 V2.0 folder and double click on Setup. Visor
More informationOpen Microsoft Word: click the Start button, click Programs> Microsoft Office> Microsoft Office Word 2007.
Microsoft Word 2007 Mail Merge Letter The information below is devoted to using Mail Merge to create a letter in Microsoft Word. Please note this is an advanced Word function, you should be comfortable
More informationOVH737 (OVH737FWD & OVH737AFT)
CPflight OPERATIONS MANUAL (FWD & AFT) This manual is intended for Flight Simulator use only and may not be used in any real world aviation application. The authors are not responsible for any errors or
More informationImport Version 4 Data into Version 8
HOW TO: Import Version 4 Data into Version 8 This step by step How To article explains how to import your templates and libraries from Palm-Tech 4 into Palm-Tech 8. For a complete list of available How
More informationWeek 5 Creating a Calendar. About Tables. Making a Calendar From a Table Template. Week 5 Word 2010
Week 5 Creating a Calendar About Tables Tables are a good way to organize information. They can consist of only a few cells, or many cells that cover several pages. You can arrange boxes or cells vertically
More informationPrint Station. Point-and-Click Printing WHITE PAPER
Print Station Point-and-Click Printing WHITE PAPER Contents Overview 3 Printing with Print Station 4 Easy-to-use Browser Interface 4 Familiar Folder Navigation 5 Search Functionality 6 Informative Display
More informationSend Setting Guide ATTENTION
Send Setting Guide This guide explains how to set up the Send to E-mail and Store to Shared Folder functions using the Send Function Setting Tool, and how to check if the functions are set properly by
More informationTeacher Cheat Sheet - Game Coding Challenges
Teacher Cheat Sheet - Game Coding Challenges Challenge #1 Movement: Make your sprite move across the screen. When it hits the walls, it must bounce off and keep moving. 1. The When Flag is clicked is your
More informationLOADING DRIVERS FOR SKYVIEW 2.0 XBEE INTERFACE USB DEVICE ON WINDOWS 8
LOADING DRIVERS FOR SKYVIEW 2.0 XBEE INTERFACE USB DEVICE ON WINDOWS 8 After you have loaded the Skyview 2.0 software, with the xbee interface plugged in to your USB drive, you try to start the program
More informationTech Memo # Software Engineering. Normal PRIORITY: DATE: April 17 th, 2015
Software Engineering Tech Memo #15-0001 PRIORITY: Normal DATE: April 17 th, 2015 TITLE: PRODUCTS AFFECTED: TOOLS REQUIRED: NOTE: INTRODUCTION: How to install and configure Adaptive Sign Server on a Windows
More informationINSTALLING THE PS3 XBOX READY SOFTWARE:
INSTALLING THE PS3 XBOX READY SOFTWARE: 1. Insert the Installation CD to CD-ROM drive and execute Ready_Setup.exe NOTE: If it is the first time for the target USB disk using under this software, the software
More informationTutorial for loading music files into an Ipad
Tutorial for loading music files into an Ipad 1. For this example we ll use Adobe Acrobat Reader as the application (app) that we ll use to file and store our music on our Ipad. There are other music applications
More informationCalifornia Amend Instructions:
California Amend Instructions: NOTE: If you used TurboTax CD/Download product to prepare and file your original return: Be sure to update your product. Go to Online and click on Check for Update. Open
More informationBrowser Support Internet Explorer
Browser Support Internet Explorer Consumers Online Banking offers you more enhanced features than ever before! To use the improved online banking, you may need to change certain settings on your device
More informationSharePoint 2010 Content Types
SharePoint 2010 Content Types A content type essentially defines the attributes of a list item, a document, or a folder. SharePoint 2010 has several built in content types and site columns that may meet
More informationAdvanced Tutorial. Separation Handling. Sample. This tutorial is only a preview of the full advanced tutorial.
Advanced Tutorial Duration: You will need approximately three hours to complete the lessons in this Advanced Tutorial. Separation Handling Sample When :APOGEE Prepress processes a color job, the color
More informationclient configuration guide. Business
Email client configuration guide Business Email March 2016 Contents 1. Mac Email Clients 3 1.1 Configuring Microsoft Outlook 2011 3 1.2 Configuring Entourage 2008 4 1.3 Configuring Mac Mail OSX 6 2. PC
More informationManage and Generate Reports
Report Manager, page 1 Generate Reports, page 3 Trust Self-Signed Certificate for Live Data Reports, page 4 Report Viewer, page 4 Save an Existing Stock Report, page 7 Import Reports, page 7 Export Reports,
More informationSupplier EMMA Schema 12 Upgrade Guide
Supplier EMMA Schema 12 Upgrade Guide Date: 15/01/2019 Version: 1.0 Contents Pre Upgrade Check... 2 Download upgrade script from the sftp site... 3 Running the schema upgrade script... 4 Post Upgrade Checks...
More informationJumping into GEMstudio. User guide 2013
Jumping into GEMstudio User guide 2013 Table of Contents Jumping into GEMstudio...3 Lesson 1) Launching GEMstudio...4 Lesson 2) Creating & Editing Pages...7 Lesson 3) Adding Buttons...13 Lesson 4) Assigning
More information