Getting to Integris/SIS

Transcription

1 Getting to Integris/SIS Firstly, before installing the app, note a couple of things that might be helpful: a) Maybe an additional keyboard would suit some. b) Don t forget to close Integris the same way as you would on any other device, otherwise you may lock yourself out of Integris. Okay, here we go. 1) On your Tablet, open the icon called My Files. It looks like the image below. 2) This will take you to the next image below, and when there, click on Device storage. 3) Now on the right, click on Download to get to the Folders you copied across previously.

2 4) Go inside the RDP folders and Double click on the red icon. This is the application required to use Remote Desktop. Don t be alarmed if you got a message like the image below. 5) Click on SETTINGS and we can fix this problem. Once clicked, you now get the next image. 6) Yes, not a very good picture there. Anyhow, I have circled the one we are interest in. Drag the little button on the far right of the ellipse and you will get another popup like the one below.

3 7) To be safe, we will leave the tick on Allow this installation only and click on OK. After doing that you will get the Install popup as you can see below. 8) So, now you can click on INSTALL. A new window will popup and be like the next image.

4 9) After a few moments, the application is installed, and you will know by the popup window. It will look like the following image. 10) Once installed, the application should open up and you should get the following image. If it does not open up, then jump ahead and read step 16 only, then come back to here. 11) Now we want to create a shortcut to Integris, but we first must add some details. Click on the plus sign, top right hand corner. It looks like the image below.

5 12) When clicked, click on the word Desktop. Sorry, another blurry image, but circled again. After selecting Desktop, you will get the next image. 13) Now we will need to add our details. Green\Enumber is pretty straight forward, you would be getting used to this now. However, the address you won t know and it s hard to read in the next image. So I will give it to you here the address goes into the PC name area.

6 Once done, click on Show additional options and you will get more options like the image below. 14) Move down to where it says Optional which is located under Friendly name and type a name for your shortcut. I called mine Integris, and when I clicked on Save, I saw the following.

7 15) Now that you have your shortcut, let s first look at how you are going to get back to this application. Close all windows. Best way of doing this is clicking on the middle button at the bottom of your tablet. Then read the next step on the next page. 16) From your Tablet s desktop, click on Apps. Now look for the RD Client. It should look like the image below. 17) Once back inside the Microsoft Remote Desktop, click on your shortcut and you will get a popup like the image below.

8 18) This is just a warning that you will be connecting to another machine. Click Connect and you will get something familiar. I won t need to show you any further, I m sure you have done the next part a thousand times or more.