DIGIPASS DP 260 USER MANUAL

Transcription

1 DIGIPASS DP 260 USER MANUAL

2 Contents 1. What is DIGIPASS? 2. How to activate the DIGIPASS and how to enter 3. How to use DIGIPASS?

3 1. What is DIGIPASS? Symbols used in the device DIGIPASS DP 260 is password-protected customer personal - ments for remote banking services. DIGIPASS represents an electronic device, which generates unique test-key (substitution to Access to all functional capabilities of DIGIPASS DP 260 is provided after entering of 5 - digit PIN-code. At handing over of DI- GIPASS device, the Bank provides the customer with initial PIN code, which must be changed to customer personal PIN code by the customer him/herself. are unpredictable, non- reproducible, time - dependant and unique device - based codes. The value of the code, after its control at the Bank is not subject to repeated use. _ NEW PIN _ PIN CONF _ NEW PIN CONF _ PIN APPLI _ FAIL LOCK PIN enter new PIN-code enter PIN-code choose the function failure DIGIPASS has been blocked

4 2. How to activate DIGIPASS device and how to enter and to change the PIN-code? At handing over of DIGIPASS device to the customer, the Bank has assigned to it an initial PIN-code, which should be changed 3. How to use DIGIPASS? Activation of the device 1. Press. 2. Enter your PIN-code after _ PIN will appear on the screen. Wrongly entered input of data may be corrected by deleting the last digit by pressing, as well as switching 1. Switch-on the device by pressing the button. 2. _ PIN will appear on the screen. Enter the initial PIN-code, provided by the Bank. 3. _ NEW PIN will appear on the screen. Enter the new PIN-code. 4. _ PIN CONF will appear on the screen. choice. 5. _ NEW PIN CONF and APPLI_ will appear on the thus enabling you to choose any of the DIGIPASS functions. If the new PIN-code will be entered incorrectly, FAIL will appear the PIN-code. 3. APPLI_ on the screen. Then you may choose any of the necessary functions. By pressing 1, the 8 digit Access code will be generated, to allow you to open access to the internet-bank Multinet. This func- - cation with the Bank s employee. You simply name the 8-digit Access code is valid for 30 minutes from the moment of its generation. By pressing 2, the Authentication code will be provided to con- By pressing 2, you will receive prompt 1 on the by the system on signing of the order. After that you will receive prompt 2 on the screen. Enter the second generated 6-digit code. Then DIGIPASS will provide you with 8-digits code for entering into the system.

5 By pressing 3, you will be able to receive Authentication code, necessary for the submission of the documents by fax. Generation of the signature for Fax documents 1. Switch on the device. 2. Enter the PIN-code. 3. Press the button 3. 1 will appear on the screen. roundups). If amount value is less than 6 digits, necessary to input rest values as zero (0). Example: payment amount is Necessary to input in Digipass value. 5. Press and hold until 2 will appear on the screen. 6. Enter the currency code (see the table). 7. Enter and hold until 3 will appear on the screen. note). The device will generate 8-digit Authentication code. 9. Make sure, that you have determined time, when the Authenti- AUD (Australian dollar) BYR (Byelorussian ruble) CAD (Canadian dollar) CHF (Swiss franc) CZK (Czech koruna) DKK (Danish krone) EEK (Estonian kroon) GBP (English pound) JPY (Japanese yen) LTL (Lithuanian litas) NOK (Norwegian krona) PLN (Polish zloty) RUB (Russian ruble) SEK (Swedish krona) UAH (Ukrainian grivna) USD (USA dollar) Other currencies The time has to be Riga local time.

6 Note If the account number does not contain more than 6 digits and no other symbols, the whole account number should be entered. Press and hold until the 8-digit Authentication code will appear on the screen. If the account number contains more than 6 digits, only the last 6 of them should be entered. Example, should be changed to digit symbols, only 6 digits should be entered (last 6, if there are more than 6 digits). Example, 12A3B C123 should be changed to Change of the PIN-code 1. When the device is switched-on and APPLI_ is on the screen, press and hold as long as _ NEW PIN will appear on the screen. 2. Enter the new PIN-code. After _ PIN will appear on the screen, re-enter the same PIN-code. _ NEW PIN CONF of the PIN-code. Provide safety of your DIGIPASS device and do not allow anybody to have access to your PIN-code. It is forbidden to disassemble DIGIPASS device on physical In cases of week battery, you will not be able to manage your account, if no alternative means of authentication (for instance code card) are at your disposal. If you have lost your DIGIPASS or it has been stolen, inform the Bank immediately. In order to receive new DIPIASS device, you have to visit the Bank or its representative The device may be switched of by pressing. The device will switch of automatically if no actions will be taken during seconds.

7