Firm Joint Jenny Calipers

Transcription

1 Calipers Micrometers Gauges Gauge Blocks 647 Telescopic Gauges 648 Height Gauges Bore Gauges 650 Dial Indicators Dial Gauges 653 Magnetic Stands 653 Engineers Levels 654 Squares, Rules & Straight Edges Protractors 656 Combination Sets 657 Measuring Sets Surface Testers Hardness Testers Optical Measuring 661 Electrical Measuring Detectors 663 Range Finders 664 Tape Measures

2 CALIPERS Firm Joint Jenny Calipers 341 Adjustable point Manufactured from polished tool steel A large headed nut and screw assembly provides a firm and rigid friction joint, with no play The sizes listed are the effective leg length which is measured from the joint assembly Size (mm) (") Spring Joint Jenny Calipers Manufactured from polished tool steel The marking leg is hardened to over 550HV at the point Bow spring ensures uniform tension over working range Firm Joint Outside Calipers Manufactured from polished tool steel A large headed nut and screw assembly provides a firm and rigid friction joint, with no play The sizes listed are the effective leg length which is measured from the joint assembly Centrally mounted adjustment screw offers finer setting than firm joint type Size (mm) (") Size (mm) (") Spring Joint Outside Calipers 52-6 Manufactured to BS 3123 Bow Spring ensures uniform tension over working range Centrally mounted adjustment screw offers finer setting than firm joint type Size (mm) (") " Firm Joint Inside Caliper A large headed nut and screw assembly provides a firm and rigid friction joint with no play Firm joint caliper capacities are generally 1 3 greater than the effective leg length Size (mm) (") / Spring Joint Inside Caliper 51-6 Bow Spring ensures uniform tension over working range Centrally mounted adjustment screw Manufactured from polished tool steel Size (mm) (") Plastic Dial Calipers Manufactured from glass reinforced nylon material Highly durable design ± 0.1mm / ± 0.004" accuracy 638 Depth Capacity Resolution Rod CDP-150M 0-150mm 0.1mm CDP-006E 0-6" 0.01" 23.84

3 CALIPERS Digitronic Workshop Caliper To DIN 862 Large 7.5mm character height digital display Accuracy 0.02mm, Repeatability 0.01mm Functions: mm/inch conversion, on/off, dataoutput, zero-setting, battery low indication Range Resolution (mm) (") (mm) (") M11015DDL M11020DDL M11030DDL ABSOLUTE Digitronic Caliper To DIN 862 The ABSOLUTE top quality digital caliper Large 7.5mm character height digital display Accuracy 0.02mm, Repeatability 0.01mm Functions: zero-setting, origin setting, ABS/INCR setting/inch conversion, on/off, data-output, zero-setting, battery low indication Range Resolution (mm) (") (mm) (") M11015DAB M11020DAB M11030DAB Digitronic Depth Caliper Top quality digital depth caliper Large 7.5mm character height digital display Accuracy 0.02mm, Repeatability 0.01mm Functions: mm/inch conversion, on/off, data-output, zero-setting, battery low indication Range Resolution (mm) (") (mm) (") M17015DB Water Resistant Caliper Accuracy to DIN 862 Water and dust resistant to IP65 specification Direct RS232 output facility compatible with most popular SPC data processors and software Depth rod 4 x 13mm Imperial / metric conversion 3,000 hour battery life Range Resolution (mm) (") (mm) (") ECS015W CALIPERS Dial Calipers An easy to read dial Ideal for measurement applications where a scale would be difficult to read Features a high precision jewelled bearing mechanism, clear graduations (0.001"), lock nut and thumb wheel Type Graduation Range Accuracy Imperial 0.001" 0-6" ±0.001" Imperial 0.001" 0-8" ±0.001" Imperial 0.001" 0-12" ±0.001" * Metric 0.01mm 0-150mm ±0.02mm * Metric 0.01mm 0-200mm ±0.03mm Metric 0.02mm 0-300mm ±0.04mm *1 dial rotating=1mm/0.1" 639

4 CALIPERS ABSOLUTE Digimatic Calipers A range of Digimatic Calipers with easy to read LCD displays for quick and accurate measurement The ABSOLUTE function is also incorporated, allowing the origin point to be set, with it retained until resetting, regardless of whether power is on or off Featuring the Quadri function, allowing internal, external, depth and step measurements to be taken All models also feature Imperial/Metric conversion, a lock nut and are error free, with resolution of 0.01mm (0.0005"). Description Range Accuracy Economy type - no data output 0-150mm/0-6" ±0.02mm/I0.001" SPC type - with data output 0-150mm/0-6" ±0.02mm/I0.001" SPC type - with data output 0-200mm/0-8" ±0.02mm/I0.001" SPC type - with data output 0-300mm/0-12" ±0.03mm/I0.001" ABSOLUTE Coolant Proof Digimatic Caliper IP66 & IP67 Imperial/metric switchable digital LCD display The ABSOLUTE function is also incorporated allowing the origin point to be set, with it retained until resetting, regardless of whether power is on or off Extremely resistant to coolants and lubricants The ABSOLUTE scale meets the most stringent protection specifications according to DIN EN against dust and water pressure The IP67 version extends the water resistance even further and it can withstand temporary, complete immersion in water or coolant without suffering damage Resolution = 0.01 mm/0.0005" Description Range Accuracy IP mm/0-6" ±0.02mm/±0.001" with data output 0-150mm/0-6" ±0.02mm/±0.001" mm/0-8" ±0.02mm/±0.001" with data output 0-200mm/0-8" ±0.02mm/±0.001" mm/0-12" ±0.02mm/±0.001" with data output 0-300mm/0-12" ±0.02mm/±0.001" IP mm/0-6" ±0.02mm/±0.001" with data output 0-150mm/0-6" ±0.02mm/±0.001" mm/0-8" ±0.02mm/±0.001" with data output 0-200mm/0-8" ±0.02mm/±0.001" Vernier Calipers A standard type Caliper for general purpose external, internal, depth and step measurements Top locking nut Imperial/metric scales Features clear graduations of 0.02mm (0.001") on a satin chrome finish Measuring face is at a 14 angle for easy reading Jaw Length (mm) Range Accuracy mm/0-6" ±0.03mm/±I0.0015" mm/0-8" ±0.03mm/±I0.0015" mm/0-12" ±0.04mm/±I0.002" CALIPERS 797 Series Water Resistant Digital Calipers Instant inch/mm conversion IP65 level of protection against foreign matter Range Reading (mm/") (mm) (") 797B-6/ / B-8/ / B-12/ /

5 CALIPERS 799 Series Digital Vernier Calipers Instant inch/mm conversion Zero the reading at any position Fine adjustment thumbwheel Range Reading (mm/") (mm) (") 799-6/ / / / / / Series Vernier Calipers Fine adjustment thumbwheel Lock to hold the slide in position Fine adjustment thumbwheel Lock to hold the slide in position Sharp, clear, easy to read dial graduations Depth bar Manufactured from hardened stainless steel Type Range Reading (mm) (") (mm) (") 125MEA-6/150 Metric/Imperial MEA-8/200 Metric/Imperial MEA-12/300 Metric/Imperial MA-150 Metric only MA-200 Metric only MA-300 Metric only Series Dial Calipers Range Graduation (mm) (mm) 1201M M CALIPERS Vernier Calipers Made from hardened stainless steel with dual reading in imperial to 0.001" and in metric to 0.02mm Readings in external, internal, depth and step modes Thumb block feature allows quick and precise measurements to be taken Size Description (mm) (") FAICALVER Analogue FAICALDIG Digital Digital Analogue CALIPERS 150mm Digital Caliper Manufactured to DIN 862 Made of stainless steel Switch off button Repeated reading ± 0.01mm Reading 0.01mm Adjustable between mm and inch Zero set in any position 4 function Colour display Screwlock Complete with plastic box

6 MICROMETERS 1961MB 965M 966M125 External Micrometers 961, 965 and 966 Series All models feature: Capacities comply with BS 870 Locking lever Choice of standard or vernier type sleeve Adjusting key supplied Supplied in case 961 series feature: Pearl chrome plated frame with insulated pads Capacity (mm) 0.01mm Steel Anvils 961M M M M M M M mm Steel Anvils 961MB MB MB MB MB MB MB Also available in imperial sizes 965 series feature: Blue textured frame finish Micrometer Capacity max size up to Measuring Faces Flatness Parallelism Screw Pitch Accuracy 50mm 0.001mm 0.003mm 0.003mm 2" " " " 150mm 0.001mm 0.005mm 0.003mm 6" " " " Capacity (mm) 0.01mm Carbide Anvils 1961M M M M M M M mm Carbide Anvils 1961MB MB MB MB MB MB MB M External Micrometers Standard: DIN 863/1 High quality outside micrometer Design line product Resolution 0.01mm Satin-chrome scale Hammertone finished frame with high quality insulated grip Tapered for easier access to difficult areas With tungsten carbide measuring faces and constant force ratchet Packed in plastic box with standard and adjusting key Range Resolution (mm) (mm) M M M M M200-01DDL Digitronic Micrometers 200DDL Standard: DIN 863/1 Digital outside micrometer with 'easy read' large 7.5mm character height, digital display Tapered for easier access to difficult areas Modern design Hammertone finished frame with high quality insulated grip 'Soft keys' for maximum operating comfort Long life guaranteed With tungsten carbide measuring faces and constant force ratchet on thimble Functions: mm/inch conversion, tolerance indication, ABS/INC, preset, on/off, zerosetting, data-output, battery low indication Packed in plastic box with standard and adjusting key Range Resolution (mm) ( ) (mm) ( ) M200-01DDL M200-02DDL M200-03DDL M200-04DDL

7 MICROMETERS Internal Micrometers 900 Series Complies with BS 959 Each model comprises a measuring head, a set of extension rods and a spacing collar to facilitate alternative measuring ranges The smaller models (901,902 & 903) have detachable extension handles Supplied in fitted case Specification: Resolution Imperial: Resolution Metric: 0.01mm Capacity Head Range (mm) (mm) 901M M M M Dial Reading Digital External Micrometer Expert quality Enamel frame, heat plates, satin chrome thimble and sleeve Carbide tipped measuring anvils, lock and ratchet stop Zero reset in any position Capacity Head Range ( ) ( ) Metric/imperial conversion Serial output for data Auto switch off Powered by SR44 battery (supplied) Adjusting tool supplied Supplied in plastic storage case MICROMETERS Part No Description Graduations Range (mm) PM025D Micrometer mm/0.0001" YPM025D Spare battery mm Metric External Micrometer Expert quality Enamelled frame, heat plates, satin chrome thimble and sleeve Carbide tipped anvils, lock and ratchet stop Supplied in plastic storage case Part No Graduations Range (mm) PM Economy Type Micrometers MICROMETERS Lightweight design suitable for all external measurements in either the workshop or inspection department Features an enamelled frame, carbide tipped measuring faces a spindle lock, clear graduations (0.01mm/0.001"), satin chrome finish and thimble Description Graduation Range Accuracy Metric 0.01mm 0-25mm ±2µm Imperial 0.001" 0-1" ±0.0001" Digimatic Micrometer Features imperial/metric conversion, carbide tipped measuring faces, clear graduations (0.01mm/0.001"), satin chrome finish sleeve and thimble Easy to read LCD display for error-free measurement Handy slim design Description Force Range Accuracy BS870 model-no data output 5-10N 0-25mm (0-1") ±2µm/±0.0001"

8 MICROMETERS ABSOLUTE Digimatic IP65 SPC Micrometers Digital external screw type micrometer with large easy to read, high resolution LCD display Features imperial/metric conversion and ABSOLUTE function, force 5-10N, resolution 0.001mm/0.0005" Made from top quality materials providing outstanding resistance to oils and chemicals - carbide tipped measuring face, with clear graduations, satin crome finish sleeve and thimble Type Range Accuracy * Ratchet stop 0-25mm/0-1" ±0.001mm/± " * Ratchet stop 25-50mm/1-2" ±0.001mm/± " * Ratchet stop 50-75mm/2-3" ±0.001mm/± " * Ratchet stop mm/3-4" ±0.001mm/± " Ratchet thimble 0-25mm/0-1" ±0.001mm/± " Ratchet thimble 25-50mm/1-2" ±0.001mm/± " *with data output ABSOLUTE Digimatic IP54 Quick Micrometer Quick-action external screw type micrometer with non-rotating spindle suitable for measuring even the most delicate objects Easy to read LCD display and exceptional battery life of years - 3 times as long as normal life for micrometer use Features Imperial/Metric conversion, ABSOLUTE function and data output for SPC applications Manufactured according to IP54 protection standards Adjustment speed is 20 times faster than ordinary micrometer Force Range Accuracy N 0-30mm/1.2" ±2µm Ratchet-Thimble Constant-Force Micrometers External screw-type micrometer with combined ratchet stop Ideal for single-handed operation Consistent measuring force due to combination ratchet design of thimble and speeder (patent applied for at time of print) Certificate of inspection included Graduation Range Accuracy Metric mm 0-25mm ±2µm mm 25-50mm ±2µm mm 0-25mm ±2µm mm 25-50mm ±2µm Imperial " 0-1" " " 1-2" " " 0-1" " " 1-2" " MICROMETERS Series Standard Outside Micrometers Carbide measuring faces Range Graduation (mm) (mm) 436.1MXRL MXRL MXRL MXRL MXRL MXRL Imperial models also available Range Graduation (mm) (mm) 436MXRL MXRL MXRL MXRL MXRL MXRL

9 MICROMETERS 124 Series Solid Rod Inside Micrometers Range No of No of Gauges Graduation Screw (mm) Rods (mm) (mm) Movement 124MAZ x mm ( 1 2") MBZ x mm ( 1 2") MCZ x 25, 2 x mm (1") S78 Series Inside Micrometer Sets Tungsten Carbide contact points above 12.5mm Appropriate setting rings provided with each tool Blind bore measurement on all instruments above 12.5mm Micrometer head fitted with ratchet for consistent gauging pressure Range No of Heads No of Graduation (mm) (mm) Rings (mm) S78MCZ S78MDZ S78MEZ , S78MFZ , & 445 Series Depth Micrometers 440 series base 63.5mm, rod diameter 3.2mm 445 series base 100mm, rod diameter 4mm Range No of Graduation (mm) Rods (mm) 440MZ-75RL MZ-150RL MBZ-75RL Series Micrometer Heads Please specify clamping diameter on order - 12 or 12.7mm. 12.7mm will be supplied if no specification given Range Graduation (mm) (mm) 263MRL V263MRL Series Long Range Micrometer Heads Please specify clamping diameter on order - 12 or 12.7mm. 12.7mm will be supplied if no specification given 460 Series Standard Micrometer Heads Range Graduation (mm) (mm) 63MRL Range Graduation (mm) (mm) 460MA MB MICROMETERS Forged Frame Micrometer Manufactured to DIN 863 Matt chromium-plated scale Fine polished measuring surfaces of hard metal Measuring range 0-25mm Friction sleeve and lock nut Supplied in wooden case Reading 0.01mm Precision ± 0.004mm

10 GAUGES 204M 206M Radius Gauges Accurately milled steel blades Designed to check both internal and external radii Range Increments of Radii (mm) (mm) Type Metric 204M Ring M Sleeve MA Ring MA Sleeve Marked with nominal size on each blade Mounted either on a ring or in a steel sleeve Range Increments of Radii (") (") Type Imperial Ring Sleeve A Ring A Sleeve Screw Pitch Gauges Accurately milled steel blades Marked with nominal size on each blade Designed to check both internal All blades fixed in a steel sleeve and external thread forms 60 screw cutting gauge included Screw Pitch No of Blades Threads per mm/inch Metric 801 SI Metric , 0.3, 0.35, 0.4, 0.45, 0.5, 0.6, 0.65, 0.7, , 0.85, 0.9, 1, 1.1, 1.2, 1.25, 1.3, 1.4, 1.5, 1.6, 1.7, 1.75, 1.8, 1.9, 2, 2.5, ISO Metric , 0.4, 0.45, 0.5, 0.6, 0.7, 0.8, 1, 1.25, 1.5, , 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6 Metric & Imperial 804 SI Metric & Whitworth 49 Metric - 0.4, 0.5, 0.7, 0.75, 0.8, 0.9, 1, 1.25, 1.50, , 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7 Imperial - 4, 4.5, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 18, 19, 20, 22, 24, 25, 28, 30, 32, 36, 40, 48, M Precision Range Feeler Gauge Sets Manufactured to DIN 2275 All blades are hardened, tempered and polished Nominal thickness marked on each blade Replacement blades available Length No of Width Lock (mm) Blades Blade thickness x 0.01mm (mm) Screw 387M , 4, 5, 6, 7, 8, 9, 10, 15, 20, 30, 40, M , 4, 5, 6, 7, 8, 9, 10, 15, 20, 30, 40, M , 10, 15, 20, 25, 30, 40, 50, 60, 70, 80, 90, M , 10, 15, 20, 25, 30, 40, 50, 60, 70, 80, 90, M , 10, 15, 20, 25, 30, 40, 50, 60, 70, 80, 90, M , 10, 15, 20, 25, 30, 40, 50, 60, 70, M , 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, , 75, 80, 85, 90, 95, M , 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, , 75, 80, 85, 90, 95, M , 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, M , 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, Also available in imperial sizes 646 IF YOU CAN'T FIND THE PRODUCT YOU RE LOOKING FOR PLEASE ASK!

11 GAUGES Surface Gauges Universal Designed for precise marking out operations Hardened and tempered steel base, ground on one end and bottom face Vee groove for locating on cylindrical workpieces Two rectangle locating pins Radial grooves in the side facilitate comfortable handling Standard Designed for marking out and general purpose use Cast base, ground at one end on the bottom face Vee groove for locating on cylindrical workpieces Two retractable locating pins Fixed Budget surface gauge designed for general purpose use Cast cylindrical base Fixed pillar Pillar Height Base Size Scriber Diameter Type (mm) (") (mm) (") (mm) (") E101B Universal 225 & & x x E102B Universal 300 & & x x E106 Standard x 75 3 x E107-9 Fixed E102B GAUGES 3015 Series Thickness Gauge Measuring pressure is independent of the user, ensuring accurate measurements Contact edges are radiused to prevent the work being marred or deflected Range Resolution Throat Depth (mm) (mm) (mm) 3015MA Steel Gauge Blocks GAUGE BLOCKS Standard: DIN 861 Hardened to HV820 (HRC65) Made from high quality stress relieved alloy steel Excellent rigidity Size and serial number are engraved on each individual gauge block No of Nominal STEP Blocks Size Quantity (mm) No. Nominal STEP Blocks Size Quantity (mm) Available in 2 grades: - Grade 1 for inspection - Grade 2 for workshop All sets have a Moore & Wright certificate All sets can be issued with a UKAS certificate at extra cost Grade M M Grade M M

12 TELESCOPIC GAUGES Telescopic Gauges Hardened and spherical ground measuring faces One side fixed and one spring loaded TELESCOPIC GAUGES Knurled handle incorporates locking screw Matt black plated finish Available individually or as a set Capacity Length (mm) ( ) (mm) ( ) TSG-501D TSG-502D TSG-503D TSG-504D TSG-505D Piece Set TSG-500D Piece Telescopic Gauge Set Expert quality Measures bore diameter and groove width Spring-loaded plunger expands within the hole Knurled locking screw allows plunger contacts to be held in position, removed and measured with a micrometer Satin chrome finish Supplied in PVC storage wallet Ranges:- 8-13mm ( 5 / 16-1 / 2") length: 115mm 13-19mm ( 1 / 2-3 / 4") length: 115mm 19-31mm ( 3 / / 4") length: 115mm 31-54mm (1 1 / / 8") length: 145mm 54-89mm (2 1 / / 2") length: 145mm mm (3 1 / 2-6") length: 145mm Part No PTGS HEIGHT GAUGES Height Gauges Features easy to read digital display Modern design 'Soft keys' for maximum operating comfort Ground micro-lapped measuring surfaces Functions: mm/inch conversion, on/off, dataoutput, zero-setting, max, min, hold, battery low indication Fine adjustment for high precision measurement Range Resolution Base (mm) (") (mm) (") (mm) M190-30DBL mm x M190-60DBL mm x HEIGHT GAUGES Digimatic HDS Height Gauges Made of robust construction, with a thick column that provides highly repeatable measurements and stability Features high contrast LCD display for fast and accurate reading, imperial/metric conversion, a carbide tipped scriber and a data output port Resolution Range Accuracy * 0.01mm/0.0005" 0-300mm (0-12") ±0.03mm/±0.0015" * 0.01mm/0.0005" 0-600mm (0-24") ±0.05mm/±0.002" mm/0.0005" mm (0-40") ±0.07mm/±0.003" *Features an ABSOLUTE function 648

13 HEIGHT GAUGES Digimatic HD-A & HDM-A Height Gauges Choice of ABSOLUTE or Incremental measurement modes Easy to read LCD display with imperial/metric conversion Feature a double column design that provides highly repeatable measurements and stability Dual Counter Type Height Gauges Features easy to read dual directional mechanical digital counters and a dial The HD-A has the additional feature of data output and connection facility for a touch probe (optional accessory) Description Accessories Touch signal probe Signal cable (1M) Signal cable (2M) Resolution Range Accuracy HD-A mm/0.0005" 0-300mm/0-12" ±0.02mm/±0.001" mm/0.0005" 0-600mm/0-24" ±0.05mm/±0.002" mm/0.0005" mm/0-40" ±0.07mm/±0.003" 1, HDM-A mm/0.0005" 0-300mm/0-12" ±0.02mm/±0.001" mm/0.0005" 0-600mm/0-24" ±0.05mm/±0.002" 1, mm/0.0005" 0-1,000mm/0-40" ±0.06mm/±0.005" 1, Contains a feed wheel for easy coarse feeding as well as a carbide tipped scriber Counters can be reset at any point Description Resolution Range Accuracy Metric 0.01mm 0-300mm ±0.03mm Metric 0.01mm 0-600mm ±0.05mm Imperial 0.001" 0-12" ±0.0015" Imperial 0.001" 0-24" ±0.0015" LH600B Linear Height Gauge A comprehensive 2D measurement and geometry system with an integral air compressor for effort free movement The processor unit features a backlit LCD display, as well as a host of measurement and teaching programs in multiple languages Functions include imperial/metric conversion, zero setting, ball diameter compensation, width measurement, centre measurement, max/min measurement, inside/outside measurement, angle measurement, go/nogo tolerance judgement and user macros Supplied with a 5mm ball probe, holder and an RS-232C data output Stroke Force Range Accuracy E mm/24" IN 0-872mm/0-38.6") ±(2+L/600)µm* 3, *When using standard eccentric Ø 5mm probe (at 20ºc) L=measured length in mm Description Shank Size Accessories Centring Probe-Metric 9 x 9mm Centring Probe-Imperial 0.25 x 0.5" Depth Measuring Attachment-Metric 9 x 9mm Depth Measuring Attachment-Imperial 0.25 x 0.5" HEIGHT GAUGES 3752 Series Electronic Height Gauges Full featured versatile tool for most measurement applications Instant mm/inch conversion Hold control feature retains a reading at any position Ability to set zero at any position and install minimum and maximum limits Output jack for data transmission Plus or minus indication allows reading in proper direction Manual on/off plus a built-in automatic off after 30 minutes of non-use Height (mm) / /

14 BORE GAUGES XT Analogue Bore Gauges Setting rings included with individual instruments and sets UKAS certificates supplied as standard with all setting rings UKAS Certificate supplied as standard with all XT mechanical micrometers Serial number on all gauges Bore gauges manufactured according to DIN 863, part 4 Heads with special anvils available to suit specific customer requirements (e.g. groove measurement) Supplied in fitted wooden case Graduation mm Other sizes and sets available on request XT Digital Xtreme Bore Gauges IP65 Electronics Simple 2-button operation Large easy-to-read display 3 preset memories RS-232C output Setting rings included with individual instruments and sets UKAS certificates supplied as standard with all setting rings UKAS certificates supplied as standard with all gauges Bore gauges manufactured according to DIN 863, part 4 Supplied in fitted wooden case Resolution mm/ Demonstrations also available Range Accuracy (mm) (mm) ( ) XTA6M XTA8M XTA10M XTA12M XTA16M XTA20M XTA25M XTA35M XTA50M XTA65M XTA80M Other sizes and sets available on request Demonstrations also available Setting Range (mm) Accuracy Ring (mm) (mm) XTD6M XTD8M XTD10M XTD12M XTD16M XTD20M XTD25M XTD35M XTD50M XTD65M XTD80M XT Holematic Xtreme Bore Gauges IP65 Electronics Simple 2-button operation Large easy-to-read swivel display 3 preset memories RS-232C output Setting rings included with individual instruments and sets UKAS certificates supplied as standard with all setting rings UKAS certificates supplied as standard with all pistol-grip gauges Bore gauges manufactured according to DIN 863, part 4 Supplied in fitted case Resolution mm/ Other sizes and sets available on request Demonstrations also available Range Accuracy (mm) (mm) XTH6M XTH8M XTH10M XTH12M XTH16M XTH20M XTH25M XTH35M XTH50M XTH65M XTH80M Bore Gauge Sets With interchangeable contact points Set of carbide tipped contact points included Unique self centring device Supplied with dial indicator, resolution 0.01mm / "/ " Packed as set with all necessary accessories to measure the complete range as shown Range Resolution M mm 0.01mm M mm 0.01mm

15 DIAL INDICATORS Mechanical Dial Indicators Comply with DIN 878-A and BS 907, where applicable 58mm/2 1 / 4" bezel on 200, 300 and 400 series, 40mm/1 5 / 8" bezel on 500 series Housings machined from solid brass Lapped stainless steel spindle and stem Robust design suited to workshop use Unbreakable Plexi-glass face Shockproof versions available on some models to protect indicator mechanism from hard impacts on the stem Water and oil proof versions available on some models (not 300 series) Stem diameter 8mm h6 Other sizes available on request Range Dial Grad One rev of Scale Bezel Ø Water Shock (mm) (mm) Pointer (mm) Reading (mm) Proof Proof DIP-504M Yes Yes DIP-223M No Yes DIP-224M Yes Yes Also available in imperial sizes Digital Dial Indicator Features easy to read large 7.5mm character height, digital display Modern design Long life guaranteed Functions: mm/inch conversion, on/off, battery low indication Soft keys for maximum operating comfort Packed in foam box Range Resolution M400-08DB 0-25mm / mm / DIP-223 M Dial Indicator Sets Two magnetic faces, plus vee for ease of use on curved surfaces Toggle lever for 'On/Off' control Accepts 1 / 4" I.D lug Dovetails, Stem / Spigot diameter 5 / 16" Description DIP-223M Dial indicator RP999MW Mag base fitment E905WFMW Mag Base MW100 Mag Base Set DIL-501M Level indicator RP999MW Mag base fitment E905WFMW Mag Base MW200 Mag Base Set DIL-501 M DIP-223 M Dial Indicators Expert quality Dial diameter: 55mm Available in metric or imperial graduations Part No Type Graduations Range PDG010M Metric 0.01mm 0 10mm PDG01I Imperial " 0 1" mm Combined Metric & Imperial Dial Indicator Expert quality Fitted with lug back Dual reading Reading in metric and imperial graduations Part No Graduations PDG mm x 0.01mm & 0-1" x 0.001" DIAL INDICATORS 651

16 DIAL INDICATORS 3025 Series Dial Indicators Supplied with tolerance hands and bezel lock All indicators supplied with lug backs Graduation Range Dial (mm) (mm) Reading J MEARURING 3657 Series Magnetic Base Indicator Holders Magnetic base with upright base post, snug, rod, indicator attachment and snug complete 3657AA Series Electronic Digital Indicators Zero the reading at any position Instant inch/mm conversion 3 / 8" diameter stem on and 8mm diameter stem on 3600M-5 Range Reading (mm) (") (mm) (") M Series Mechanical Magnetic Base Indicator Holders Universal indicator holder complete with 657 magnetic base, triple joint arm and sensitive fine adjustment DIAL INDICATORS Level Indicators Suitable for a range of inspection applications for comparative measurements Features clear, high-contrast graduations Jewelled bearings, precision gears and pinions for smooth accurate movement and quick response One-piece bezel and crystal fitting with O-ring to resist water and dust ingress Sets contain a range of accessories including swivel arms, clamps, contact points and stems Description Scale Force Range Accuracy Imperial N 0.03" ±0.0005" E Metric N 0.8mm ±8µm Level Indicator Sets T Imperial N 0.03" ±0.0005" T Metric N 0.8mm ±8µm Dial Indicators Features continuous dial and hardened stainless steel plunger Description Scales Force Range Accuracy 2414S Imperial (100-0) 1.5N 0.5" ±0.001" S-10* Imperial (100-0) 1.5N 0.5" ±0.001" S Metric (100-0) 1.4N 10mm ±13µm S-15* Metric (100-0) 0.8N 10mm ±13µm S-60 Metric (100-0) 2.5N 10mm ±13µm S-80 Metric (100-0) 5.0N 10mm ±15µm *Features jewelled bearings Peak retaining ABSOLUTE Digimatic Indicator IDS Features a large easy to read, high True reading even at high plunger speed resolution LCD display Imperial/Metric conversion, ABSOLUTE function, zero setting and data outputs for SPC applications Resolution Force Range Accuracy mm/0.0005" 2.0N mm/0-0.5" 0.02mm/0.0008" 87.60

17 ABSOLUTE Digimatic Indicator IDU Features a large easy to read, high resolution LCD display, Imperial/Metric conversion, ABSOLUTE function, zero setting and data outputs for SPC applications True reading even at high plunger speed Slender construction for applications where space is limited Resolution Force Range Accuracy mm/0.0005" 1.8N mm/0-1" 0.02mm/0.0008" DIAL INDICATORS ABSOLUTE Digimatic Indicator IDC Features a large easy to read, high resolution LCD display, Imperial/Metric conversion, ABSOLUTE function, zero setting and data outputs for SPC applications Tolerance display shows if measurement is within tolerance limits set Resolution Force Range Accuracy B 0.01mm/0.0005" 0.9N mm/0-0.5" 0.02mm/0.0008" B 0.001mm/ " 1.5N mm/0-0.5" 0.003mm/ " B 0.001mm/ " 1.8N mm/0-1" 0.003mm/ " ABSOLUTE Digimatic Indicator IDF Features a large easy to read, high resolution LCD display, Imperial/Metric conversion and ABSOLUTE function Guaranteed precision even with high speed movements Long travel model (50.6mm/2") Features switchable resolution and colour changing display for go/no-go tolerance mode Resolution Force Range Accuracy E 0.001mm/0.01mm "/0.0005" "/0.001" 1.8N mm/0-1" 0.003mm/ " E 0.001/0.01mm "/0.0005" "/0.001" 2.3N mm/0-2" 0.006mm/ " DIAL GAUGES Dial Gauge and Stand Dial indicator and indicator stand combined Stand max height adjusted: 330mm Dial measurement range: 10mm MAGNETIC STANDS Magnetic Stand For use with dial indicators, etc Powerful magnetic base with on/off switch Precision ground surface Dimensions:- Base: 50 x 55 x 60mm Overall height: 240mm Main shaft: 180 x 12mm Part No MB-LD

18 ENGINEERS LEVELS ELS ELM Engineers Levels Main vial sensitivity of 1 minute and protected by rotating shroud ENGINEERS LEVELS Each level is fitted with a main, cross and plumb vial Vial solution maintains colour and fluidity under all workshop conditions Precision ground cast bore with vee groove for location and cylindrical work Mini Level Ultra compact dimensions and a single vial Machined from a solid block of carbon steel Vertical plumb vial on ELT-002X Supplied in retail pack 98 Series Machinists Levels Cross test vial on 150 and 200mm levels ensures simultaneous levelling in both directions and prevents inaccuracies in main vial readings Specification:- Resolution : 0.3mm/M "/ft Dimensions L x W x H (mm) ELS 165 x 34 x ELM 310 x 36 x Dimensions L x W x H (mm) ELT-001XR 65 x 20 x Size (mm) * * *With cross test vial SQUARES, RULES & STRAIGHT EDGES Engineers Squares Precision ground blade and stock Blind riveted construction Hardened and tempered blades Workshop grade B Blade Length (mm) (") Engineers Rules Made from fine quality steel which has been hardened and tempered to provide the ideal balance between flexibility and durability D end with hanging hole Satin chrome anti-glare finish Permanent black high definition scale markings Rule Dimensions L x W x T Graduations (mm) Graduations Front Face Rear Face ER306F 150 x 19 x & 1mm 0.5 & 1mm 5.51 ER x 25 x & 1mm 0.5 & 1mm 9.35 ER106F 150 (6") x 19 x ", 1 32", 1 64", 1 10", 1 20", 1 50", 1 100" 0.5 & 1mm 5.51 ER206F 150 (6") x 12.5 x ", 1 32", 1 64", 1 10", 1 20", 1 50", 1 100" 0.5 & 1mm 5.51 ER (12") x 25 x ", 1 32", 1 64", 1 10", 1 20", 1 50", 1 100" 0.5 & 1mm 9.44 ER (12") x 12.5 x ", 1 32", 1 64", 1 10", 1 20", 1 50", 1 100" 0.5 & 1mm 9.42 ER (24") x 25 x ", 1 32", 1 64", 1 10", 1 20", 1 50", 1 100" 0.5 & 1mm

19 SQUARES, RULES & STRAIGHT EDGES Stainless Steel Rules Manufactured to JIS (Japanese Industrial Standard) Expert quality Precision rules manufactured from hardened stainless steel matt chrome plated Clear black graduations of 0.5mm, mm, 0.5cm, cm and 1 / 64, 1 / 50, 1 / 32, 1 / 20, 1 / 16, 1 / 10, 1 / 2" Inches on reverse are permanently etched for long service life Packed into vinyl wallets with stock No and on display cards Overall Part No Length SSR6 150mm (6") SSR12 300mm (12") SSR24 600mm (24") SSR mm (36") Combination Square with Centre Head and Protractor Matt black metal stock with machined faces Centre reversible protractor Brass adjusting screws Stock incorporates spirit level and scriber Protractor incorporates a spirit level and is clearly graduated in both directions Engineers Precision Squares Solid steel stocks with hardened, tempered and finely polished blades Manufactured to BS 939 Workshop Grade B for squareness tolerance only Tolerance: +/-0.016mm " Aluminium blade is graduated mm and 1 / 16" one side and 0.5mm and 1 / 32" on the other Overall Part No Length (mm) C Part No Size (mm) SQUARES, RULES & STRAIGHT EDGES Engineers Squares Made from high quality tool steel Hardened and tempered blade Blade length measured from inner edge of stock to blade tip 1-4" blades available upon request Blade Length ( ) Stock Length ( ) AHD AHD AHD AHD AHD AHD Description AHD Set of 4 squares: 2, 3, 4 and 6" Rigid Rustless Steel Rules to EC class ll Metric/Imperial Metric only and larger sizes also available on request Top edge: 0.5 and 1mm, figured in cm Bottom edge: 16ths, 32nds, 64ths, figured Flexible 18 x 0.5mm also available in inches Length Section (mm) AHD-83R/ mm/6" 18 x AHD-83R/ mm/12" 30 x AHD-83R/ mm/24" 30 x AHD-83R/1000 1M/40" 30 x AHD-83R/ M/60" 30 x AHD-83R/2000 2M/80" 30 x AHD-83R/3000 3M/118" 30 x AHD-83R/4000 4M/156" 30 x

20 SQUARES, RULES & STRAIGHT EDGES 2 sides, 4 edged Rustless Steel Rules The patterns most widely specified by British engineers Contents:- 2", 3", 4" and 6" squares FAIESSET Specification:- Front: first edge: 16ths, 32nds, 64ths other edge: 10ths, 20ths, 50ths, 100ths Reverse: first edge: 0.5mm other edge: 1mm and figured in mm Graduated on two sides, four edges to BS 4372: 1968 Length (mm/") Section (mm) AHD-60R/ /6 18 x AHD-60R/ /12 30 x AHD-61R/ /6 13 x AHD-61R/ /12 13 x General Purpose Straight Edges Carbon steel One bevelled edge For workshop applications only Section: 40 x 5mm mm along bevelled edge of graduated pattern Type Length (mm) AHD Ungraduated AHD Ungraduated AHD Ungraduated AHD Ungraduated AHD Graduated AHD Graduated AHD Graduated AHD Graduated SQUARES, RULES & STRAIGHT EDGES Set of 4 Engineers Squares Crafted from high quality tool steel Accurate to BS 939 grade B standard Supplied in an attractive wooden storage case PROTRACTORS BPRO-6 AAA Bevel Protractors Complies with BS 1685 Resolution of 5 arc minutes ( 1 12º) Fully hardened and ground stainless steel body Top mounted adjuster for fine setting whilst the unit is on flat surface Locking lever fitted for ease of blade insertion and positive clamping Bevelled blade ends to facilitate working in awkward corners Scale plate is graduated 0-90º-0, in both directions through 360º Choice of blade lengths Model Description BPRO-6 Basic Set Includes protractor body and 150mm blade BPRO Full Set Includes protractor body, 150mm and 300mm blades, and acute angle attachment BP6-RULE 150mm Blade supplied as standard with both sets BP12-RULE 300mm Blade supplied as standard with full set AAA Acute Angle Attachment Supplied as standard with full set

21 COMBINATION SETS Precision Combination Sets Fully hardened and tempered precision rules with deeply etched graduations on both sides for ease of reading and long life Fully hardened and ground datum faces to resist wear Centrally mounted protractor vial allows unrestricted viewing Protractor has full 360º scale plate, graduated 0-180º - 0 Satin chrome scale plate on protractor Unique rule clamp allows positive location and clamping Square head offers the following fixed angles: 15, 30, 45, 60, 75 and 90º Centre head offers a fixed 90º angle, for finding the centre of round bar stock up to 120mm diameter Graduations: Metric - in 0.5mm, numbered every 10mm Imperial - 32nds and 64ths numbered every 1 / 8 Description Metric/Imperial CSME12 Full set including rule, protractor head, sq head and centre head CSRME12 Rule 300mm/12" CSRME24 Rule 600mm/24" Metric CSM300 Full set including rule, protractor head, sq head and centre head CSRM300 Rule 300mm CSRM600 Rule 600mm Accessories available, please ask for details COMBINATION SETS 435 Series Combination Sets With reversible lock bolts, scriber, spirit level in both square head and protractor head Direct reading double 180 protractor scale and hardened steel, machine divided blade Size Graduation 435M mm mm and 1 2mm both sides ME mm/11 3 4" 1 2mm and 32nds one side mm and 64ths reverse side Piece Measuring Kit SETS Supplied in a TC tray Fits in Teng Tools storage system Digital caliper: 150mm (6") Micrometer: 0-25mm (0-1") Precision square: 150 x 100mm (6" x 4") Steel rule: 150mm (6") Scriber TC tipped (length): 150mm (6") Type Metric Imperial SETS 6 Piece Measuring Set Useful set of precision measuring instruments Contents:- Contents:- Spring divider Outside caliper Inside spring caliper Depth gauge Slide rule Sliding caliper Part No MS

22 SETS 14 Piece Measuring Kit Supplied in a plastic box The underside of the case is fitted with rubber feet to prevent it from sliding Case size: 450 x 288 x 60mm Specification:- Contents:- Digital caliper: 150mm Micrometer: 0-25mm Telescopic gauges (6 pieces): 8-150mm Precision square DIN875/2: 150mm Protractor: 80mm Screw pitch gauge M/UNC: 55 blades Feeler gauge 13 blades: mm Steel rule: 300mm Scriber TC-tipped: 150mm SURFACE TESTERS Surface Roughness Tester R-130 / R-135 Ra and Rz parameters, switchable display Adjustable tracer also for 90º or 180º measurement plane Large measuring range suitable for most materials Piezo-electric pickup stylus for external surfaces (diamond tip for latest ISO standard) Accuracy to DIN4772 Class 3 Measuring range: Ra µm (1µ"-250u") Rz 0.2µm µm (8µ "- 999µ") Display Resolution: 0.01µm (1µ ") Cut-off lengths: 0.25mm/0.0001", 2RC filter select time 0.8mm/0.03", 2RC filter select times 2.5mm/0.01", 2RC filter select 1 times Stylus tip radius: 2µm Alkaline battery power: 9v Output: RS232 (R135) Optional Extras: Tracers for special applications, printer Description W-R130 Surface Roughness Tester 1, W-R135 Surface Roughness Tester + RS232 output 1, W-R130/3200 Stand for R-130, R W-R130/4101 Data cable to PC or Printer Portable Mtr110 Surface Roughness Tester Back-light LCD Dynamic Test Display: progress of cut-off length during testing Li-ion rechargeable batteries with low battery indication Protection slide on pick-up Auto-off after 90 seconds Pocket-size and economically priced Both Ra and Rz parameters in one instrument Features external calibration Large measuring range suitable for most materials Piezo-electric pick-up stylus for external surfaces Ra and Rz: Rz is the mean of all of the maximum peak to valley heights, from each sampling length, within the assessment length Ra is the universal recognised and most used international parameter of roughness. It is the arithmetic mean of the absolute departures of the roughness profile from the mean line Specification:- Measuring range: Rz µm / Ra µm Cut-off lengths: 0.25, 0.8, 2.5mm Tracing length: 6mm Tracing speed: 1mm/sec Admissible temperature range: 0-40ºC Power supply: 3v Dimensions: 102 x 70 x 22mm Weight: 180g Charger: 9v DC Minimum curvature of cylindrical surface: 40mm diameter (V-grooved base) MTR-110/UK

23 SURFACE TESTERS SJ Series Portable Surface Roughness Testers Ideally suited for both shop floor and laboratory applications Featuring go/no-go tolerance judgement auto calibration, auto sleep with data retention, SPC and RS-232C outputs Compact handheld unit with large easy to read LCD display, 18 evaluation parameters, complete with carry case The SJ-301 features a touch screen LCD display and a built-in thermal printer along with 25 evaluation parameters, complete with carry case CV-600A / CV-600MA Rockwell Hardness Tester Supplied with FREE installation, training and UKAS traceable certification Full technical specification and FREE demonstrations available upon request Basic regular Rockwell bench tester range offering accuracy, reliability and durability at an extremely affordable price Direct analogue display of HRC, B, A, F All regular Rockwell scales Standard delivery includes range of test anvils, indentors and test blocks The SJ-401 features a touch screen LCD display and a built-in thermal printer along with 35 evaluation parameters, skid/skidless measurement, DAT levelling assistance function Description Accessories Granite measuring stand Range Model (Z Axis) (X Axis) E SJ-201P 350µm (14000µin) 12.5mm (0.5") 1, E SJ µm (14000µin) 12.5mm (0.5") 2, E SJ µm, 80µm, 8µm, (0.032", 0.003", ") 25mm (1") 3, Accuracy conforms to EN-ISO 6508 (also ASTM-E18 CV-600A) Calibration and UKAS Certification service available Specification:- Programmable dwell time Major loads: 60, 100 & 150Kg Specimen max height: 170mm Specimen max depth: 165mm Description W-600A Rockwell tester, manual, analogue display 1, W-600MA Rockwell tester, motorized, analogue display 1, E E HARDNESS TESTERS CV-600D Digital Rockwell Hardness Tester Supplied with FREE installation, training and UKAS traceable certification Full technical specification and FREE demonstrations available upon request Digital LCD reading of 15 regular Rockwell scales Conversion to all other hardness scales such as Vickers and Brinell Menu operated LCD screen with many functions such as go/no-go judgement, conversions, load cycle indication, date, time Integrated printer for test result and statistics Curvature correction feature Calibration and UKAS Certification service available Accuracy conforms to EN-ISO6508 and ASTM E-18 Specification:- Direct conversion to Vickers, Brinell and Rockwell scales Integral printer and RS232 output Large working area W-600D 4, TH-170 Portable Hardness Tester Full technical specification and FREE demonstrations available upon request Direct display of hardness values in Rockwell HRB, HRC, Vickers HV, Brinell HB, Shore HS, Leeb HLD Impact Device D integrated: no cables Automatic identification of impact test direction Specification:- Accuracy conforming: ± 6HLD ( HLD) ± 10HLD ( HLD) Memory: 270 average readings in 9 group files Output: USB2.0 W-TH170 1,

24 THS07_MS12_P /5/07 12:13 Page 660 HARDNESS TESTERS DSAS & DSDS-000 Digital Shore Durometers Full technical specification and FREE demonstrations available upon request Scale A Durometer used for testing rubber, plastic, leather and all other soft material Scale D Durometer used for testing plastic, resins, polymers etc Large digital display HARDNESS TESTERS HARDMATIC HH-411 Portable Hardness Tester Lightweight, portable hardness testing instrument for metalwork pieces Operates on the rebound hardness principle (standardised according to ASTM 7956) Zero setting Electronic module protection to IP65, even with data output UKAS Certification Specification:- Resolution: 0.1mm Display Range: 0-100mm Indentor Diameter: 1.25mm Description DSAS001 Digital 'A' Scale Durometer, Sylvac RS232 output DSDS001 Digital 'D' Scale Durometer, Sylvac RS232 output LCD display automatically shows go/no-go with the tolerance function set and selected Features, automatic measuring direction angle-compensation and memory function for 1,800 measured values Hardness Value Impactor Hardness L (Leeb) Carbide 3, Rockwell Hardness Testers Economical tester models 15 Rockwell scales Analogue dial and digital LCD display Description Scale Test Force (Kgf) E AR-10 analogue model Rockwell 60, 100, 150 3, E ARK-600 digital model Rockwell 60, 100, 150 5, Vickers & Micro Vickers Hardness Testers These digital models have measuring microscopes that use cross hairs that fit the indentation made during testing on both sides Quick and precise indentation measurement Measurement data and hardness values are digitally displayed on the LED display on the main unit The Micro has a calibration function allowing objectives to be switched and allows small indentations to be measured with high accuracy Also features a range of data processing functions such as hardness scale conversion and statistical calculation Model Scale Test Force (Kgf) E HV-112 Vickers 0.3, 0.5, 1, 2, 10, 20 11, E HV-114 Vickers 1, 2, 5, 20, 30, 50, 10, E HM-112 Micro Vickers 0.01, 0.025, 0.05, 0.1, 0.2, 0.3, 1 9,

25 THS07_MS12_P /5/07 12:13 Page 661 Wizhard Rockwell/Rockwell Superficial/Brinell Hardness Testers HARDNESS TESTERS Wizhard machines provide three types of testing within one machine Using an electronic test force system it allows for accurate loading and eliminates overshooting Features a bill-shaped indenter arm for easy access of interior and exterior surfaces, cylindrical and spherical surface compensation, statistical processing, hardness scale conversion and backlit touch screen user interface Includes accessories: testing blocks, dust protection cover, diamond indenter (UKAS), Steel ball indenter 1 16", Flat anvil Ø 64mm and V-anvil Ø 40mm Groove width 30mm, 120º Model Scale Test Force (Kgf) E HR-521 Rockwell 15, 30, 45, Rockwell Superficial 60, 100, 150 Brinell , E HR-522 Rockwell 15, 30, 45, Rockwell Superficial 60, 100, 150 Brinell 6.25, 10, 15.62, 25, 30, 31.25, 62.5, 100, 125, , DUROTWIN Rockwell/Rockwell Superficial Hardness Tester Robust and user-friendly manual Rockwell and Rockwell Superficial hardness tester Includes accessories: testing blocks, dust protection cover, diamond indenter (UKAS), steel ball indenter Ø 1 16", Flat anvil Ø 64 mm/2.52" and V-anvil Ø 41mm groove width 25mm Scale Test Force (Kgf) R Rockwell 588.4, 980.7, 1471 Rockwell Superficial 147.1, 294.2, , OPTICAL Profile Projector Benchtop instrument for testing small and medium-sized workpieces Vertical, rotatable crosshair lines screen Easy-to-operate co-ordinate measuring stage with coarse and fine adjustment Direct and clear, easy-to-read XY digital display at eye level ensures safe and error-free measurement Screen Effective Work Range Magnification Resolution Area of Stage XY Travel Accuracy E Switchable 0.01º/1' 142 x 142mm 100 x 100mm 0.1% transmitted illumination 0.15% incident illumination 4, E Switchable 0.01º/1' 266 x 170mm 200 x 100mm 0.1% transmitted illumination 0.15% incident illumination 7, Toolmakers Microscope TM-500 Angle reading 360 Magnification: 30x Transmitted/ Range Part No Incident Illumination (XY) CEE TM v 2w intensity adjustable 50 x 50mm 1, CEE TM v 2w intensity adjustable 100 x 50mm 2, DEMONSTRATIONS & TECHNICAL ADVICE AVAILABLE PLEASE CONTACT US FOR DETAILS 661

26 ELECTRICAL 16 Function Digital Multimeters IEC specification 16 position rotary function and range selector Diode check Supplied with probe set Additional functions:- 9v battery test Part No Description DMM7 Digital multimeter YDMM7 Crocodile clips YDMM7 Probe set Function Digital Multimeters with Rubber Holster IEC specification 30 position rotary function and range selector Diode check Supplied with probe set Additional functions:- Data hold, temperature, frequency, auto power off, illuminated display 8 Function Autoranging Digital Multimeters IEC specification 8 position manual/auto-ranging rotary function and range selector Diode check Supplied with probe set Additional functions:- Data hold, duty circle, temperature, frequency, max cable 35mmØ, auto power off, illuminated display Part No Description DMM10B Digital multimeter ADMM2 Crocodile clips YDMM8 Spare probe set YDMM8 Spare temperature probe D6LR61/HD PP3 heavy duty 9v alkaline battery 3.70 Part No Description DMM9B Auto-ranging digital clamp meter ADMM2 Crocodile clips YDMM8 Spare probe set YDMM8 Spare temperature probe D6LR61/HD PP3 heavy duty 9v alkaline battery 3.70 Part Nº Part Nº Part Nº DMM DMM10B DMM9B DC Voltage Range 200mv, 2000mv, 20v, 200v, 500v 200mv, 2v, 20v, 200v, 1000v 400mv, 4v, 40v, 400v, 600v Accuracy ± 0.50% 1000v 600v AC Voltage Range 200v, 500v 2v, 20v, 200v, 700v 400mv, 4v, 40v, 400v, 600v Accuracy ± 2% 600v DC Current Range 2000µA, 20mA, 200mA 2mA, 20mA, 200mA, 20A N/A Accuracy ± 2% 20A N/A AC Current Range N/A 2mA, 20mA, 200mA, 20A 40A, 400A, 1000A Accuracy ± N/A 20A 1000A Resistance Range 200Ω, 2000Ω, 20KΩ, 200KΩ, 2000KΩ 200Ω, 2KΩ, 20KΩ, 200KΩ, 2MΩ, 20MΩ 400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ Accuracy ± 1.5% 20MΩ 40MΩ Capacitance Range N/A 2nF, 20nF, 200nF, 2µF, 200µF 40nF, 400nF, 4µF, 40µF, 100µF Accuracy ± N/A 200µF 100µF Size (W x H x D mm) 55 x 112 x x 195 x x 229 x 49 Weight (g) Battery Type 1 x 12v (23A) 1 x 9v (PP3) 1 x 9v (PP3) Positions: Rotary function & range selector manual/auto-ranging 662

27 ELECTRICAL Palm Size Digital Multimeter Safety isolation CAT l 600v/CAT ll 300v, IEC Display and backlight Measures AC/DC, DC current, resistance and temperature Fused to maximum 200mA Complete with test lead, temperature probe, protective holster, bench stand, battery and English manual Diode test, continuity test with buzzer, datahold and low battery capacity Max display Detector Detects ferrous, non ferrous metals, live wires and wooden substructures Comes with a handy belt bag Large detailed LCD display for easy and accurate read out Power supply 9v (6LR61) battery Automatic shut off function after 5min Automatic calibration, always ready for immediate use Acoustic and red/green light feedback Focus function for precise location of metal objects Maximum scanning depths:- ferrous metals - 80mm non-ferrous metals - 60mm copper conductors (live) - 50mm wood - 20mm SSP DETECTORS DETECTORS Digital Multi-Detector Detects: steel, steel reinforcement, non-ferrous metal, studs and electric wirings Simultaneous detection of wood/metal/live wires Power supply: 9v 6LR61 Soft grip 2 operating modes Auto switch off: 5mins Integrated marker LED on marking hole red for stop and green for proceed Differentiation and indication of ferrous and non-ferrous metals Autocalibration for metal detection Optional acoustic signal Zoom mode for precise location Comes with soft protective bag ( P19) Specification:- Lateral resolution: ±5mm Dimensions: 30 x 84 x 203mm Detection depth: iron 10cm copper 8cm copper wire hot 5cm copper wire cold 2cm wooden substructures: 2cm Weight: 250g SSP DMF 10 ZOOM COMPREHENSIVE RANGE OF LASER LEVELS & ON PAGES SPIRIT LEVELS

28 RANGE FINDERS Digital Laser Range Finder Pocket size accuracy Measurements (metric and imperial) are obtained a lot faster than with mechanical methods Auto switch-off Distances that can t be measured directly, can be determined using the indirect measuring mode Low battery function Dust and splashed water protection Tripod mount Special features: Pythagoras, tripod attachment, measuring spike Power supply: 4 x LR03 (AAA) (included) Accessories included: protective soft bag, batteries and instructions Laser Range Finder Easy to operate and precise measurements of lengths, areas and volumes Measures accurately up to 150M A wide range of practical functions such as indirect length measurement, continuous measurement, minimum and maximum function, addition and subtraction Power supply: 4 x 1.5v LR6 Measuring range: M Measuring accuracy (min): ±1.5mm Measuring accuracy (max): ±5mm Measurement time: 0.5sec (min) 4sec (max) Laser class: 2 Laser diode: 635Nm, <1mW Laser diameter: 6mm at 10M, 30mm at 50M Temperature range operating: -10 C C storage: -20 C C Dimensions: 100 x 58 x 32mm Weight: 250g (including batteries) SSP DLE Laser diode: 635Nm, <1mW Laser class: 2 Measurement range: 0.3M-150M Power supply: 4 x 1.5v LR6 Measurement time: 0.5 4sec Weight: 420g SSP DLE Digital Laser Range Finder Easy to operate and precise measurements of lengths, areas and volumes Measures accurately up to 150M A wide range of practical functions such as indirect length measurement, continuous measurement, minimum and maximum function, addition and subtraction Power supply: 4 x 1.5v LR6 Complete with Bluetooth Specification:- Specification:- Specification:- Laser diode: 635Nm, <1mW Laser class: 2 Measurement range: 0.3M-150M Measurement time: 0.5 4sec Radio transmission range: 10M Weight: 430g SSP DLE 150 CONNECT TAPE MEASURES Tape 5 Tape Measure Class II accuracy Autobrake system Magnetic rubber grip hook Big blade standout Tough ABS/rubber body Softech Tape Class II accuracy High quality tape Nylon coated blade Pause button Lock button Length (ft/m) / / Impact resistant body with soft feel finish Length (ft/m) T / T /

29 TAPE MEASURES Fibreglass Measuring Tapes Expert quality ABS plastic case with a plated flush winding handle and stainless steel holding claw on end of tape Fibreglass tape graduated metres into cm/mm and feet into inches and 1 / 8" on reverse Tape Length Tape Width Description (M/ft) (mm) STFG 10/ STFG 20/ STFG 30/ Surveyors Tapes Expert quality ABS plastic case with soft grip grab handle, winding handle and stainless steel holding claw on end of tape Fibreglass tape graduated metres into cm/mm and inches and 1 / 8" on reverse Tape Length Tape Width Description (M/ft) (mm) STFG/SG 30/ STFG/SG 50/ Professional Measuring Tapes Expert quality Impact-resistant satin chrome plated ABS case with belt clip and large blade locking button Power return nylon coated blade has clear black and red graduations, metres into cm/mm and feet into inches, 1 / 8" and 1 / 16" Yellow wear resistant coating Stud centre markings every 16" Self-aligning double plated end hook* for very accurate internal/external measurements *not applicable to the 3M/10ft tape measure Tape Length Tape Width Description (M/ft) (mm) EMTS 3/ EMTS 5/ EMTS 7.5/ EMTS 9/ White Enamelled Steel Dipping Tapes complete with Weight Lightweight aluminium frame winder complete with weight LT-2 (brass mm/16ths) 13mm wide steel tape phosphated and enamelled white Graduated in mm one side and feet, inches and 1 / 16ths on the reverse Length (M/ft) FR-D-415W-ES-10 10/ FR-D-415W-ES-20 20/ FR-D-415W-ES-30 30/ FR-D-415W-ES-50 50/ TAPE MEASURES Circumference and Diameter Measuring Tapes PVC coated steel case Material Blade Length (M) Width (mm) FR-345D/5M Black etched carbon steel FR-345D/7.5M Black etched carbon steel FR-345D/10M Black etched carbon steel Pocket Circumference FR-NO.19/2M White enamelled steel FR-NO.20/2M Black etched steel

30 TAPE MEASURES Nylon Coated Measuring Tapes 404P and 405P are in a PVC covered steel case 13mm width EC Class II 404R and 405R are on a very light robust plastic frame winder (aluminium v frame also available) 13mm width EC Class II Plastic frame Steel Case TAPE MEASURES Length FR-404P/10M 10M FR-404P/20M 20M FR-404P/30M 30M FR-405P/10M+FT 10M/33ft FR-405P/20M+FT 20M/66ft FR-405P/30M+FT 30M/100ft Tape Measures Automatic blade lock Push button retrieval Dual imperial/metric graduations 25mm blade Soft grip anti-slip case Strong magnetic end hook Length FR-404R/30M 30M FR-404R/50M 50M FR-404R/100M 100M FR-405R/30M+FT 30M/100ft FR-405R/50M+FT 50M/165ft FR-405R/100M+FT 100M/330ft Belt clip 5 year guarantee Length (M) T/L T/L ASK ABOUT OUR CALIBRATION SERVICE FOR NEW EQUIPMENT 666

31 ORDERING Thank you for your interest in the latest Product Catalogue produced in association with THS Tools Group. PRODUCT CATALOGUE Established in 1975, the THS Tools Group is the UK s largest buying group of independent distributors supplying a complete range of leading brand products to industry & tradesmen via a network of distribution outlets all offering personal service and support. THS Members can offer you a comprehensive range of products at competitive prices and with over 140 outlets throughout the UK and Ireland, you won t have far to travel for all your requirements. How to order: 1 Select the product you require 2 Contact your local THS distribution outlet 3 Quote the product code and page number If you are unsure who your local THS Member is click here and enter your postcode into the dealer locator The 800 page Product Catalogue represents just a selection of the product portfolio on offer. If you are unable to find what you require, please contact your local THS Member who will also be able to offer technical advice and information regarding current promotions. Disclaimer The Publisher of this catalogue does not assume any legal responsibility for errors or omissions that may have been made in this publication and makes no warranty/guarantee or promise expressed or implied concerning the content, accuracy, currency, quality or usefulness of the information provided here. In no event shall the Publisher be liable for any direct/indirect punitive, incidental, special, consequential or any other damages arising out of, or in any way. Specifications and descriptions in this catalogue are given in good faith but may change without notice and do not form any part of any sale contract. Trade Marks: All brand names and product names used in this book are trade marks, registered trade marks or trade names of their respective holders. Prices: All prices exclude VAT and were believed to be correct at going to press. E&OE