Ultra High-speed High-precision Laser Displacement Sensor HL-C2 SERIES
|
|
- Osborn Mills
- 5 years ago
- Views:
Transcription
1 981 FIBER PHOTO MICRO PHOTO AREA IGHT CURTAINS PRESSURE / FOW INDUCTIVE PROXIMITY PARTICUAR USE SENSOR OPTIONS SIMPE UNITS MEASUREMENT STATIC CONTRO DEVICES ENDOSCOPE MARKERS Ultra High-speed High-precision aser Sensor SERIES Related Information General terms and conditions... F-17 Glossary of terms / General precautions... P.1397 / P.145 Sensor selection guide... P.967~ About laser beam... P.143~ Conforming to EMC Directive Ultra high-speed, high-precision laser displacement sensors using a combination of new technology Conforming to FDA regulations series are introduced to limited countries only, because some models falls under WA (Wassenaar Arrangement).B.6.b.1.a, and NSG (Nuclear Suppliers Group) guidelines 1.B.3.b.1. Please contact our office for details. This product is classified as a Class 1 / Class / Class 3R aser Product in IEC / JIS standards and a Class I / Class II / Class llla aser Product in FDA regulations 1 CFR Never look at or touch the direct laser beam and its reflection. PC / TERMINAS HUMAN INTERFACES ENERGY CONSUMPTION VISUAIZATION FA VISION UV CURING Selection Guide aser Magnetic Collimated Digital Panel Metal-sheet Double-feed Detection H-G1 H-C1 M1 Excellent basic performance These sensors achieve an excellent level of performance in the three basic functions which are required of reflective type laser displacement sensors. They can provide Surplus, Reliability and Confidence to production sites which demand high speeds and high precision. 3F Sampling inearity Resolution 1 khz ±.3 %.5 µm 1F Sampling inearity Resolution 1 khz ±. %.1µm HDC-CMOS sensors.1 mil.4 mil MSGB High-resolution lens The HDC-CMOS sensors have been developed specially for the series. High density light-receiving cells and a processing speed which is close to maximum limits result in high resolutions and high speeds which exceed all expectations for laser displacement sensors. HDC: High Density inear Cell Comparison of cell structures (Image) Resolution Ultra-high speed calculation processor 3F HDC-CMOS sensor Sampling Increased cell width Increased cell density Previous
2 Ultra High-speed High-precision aser Sensor SERIES APPICATIONS Measurement of the positions of patterned glass Detection of deformed narrow pitch connector leg pins Measurement of HDD surface variations High-resolution lens High-resolution lens has been newly designed to perfectly suit HDC-CMOS sensors. The light-receiving part can create images at a minimum point from light received from a variety of different angles to produce images with even greater precision. Resolution inearity Comparison of beam quality (Image) Image MSGB Previous Exclusive optical equipment and diaphragm structure sustain laser beam of high quality at a radiant density that is close to ideal in the Gaussian distribution. Emission intensity adjustment function, using the newest algorithm, is able to follow any deviation of the light receiving intensity instantaneously maintaining the best emitting condition at all times. MSGB: Micro Spot Gaussian Ultra high-speed calculation processor All signals are digitalized by a high speed processor while achieving high precision and high speed with its exclusive algorithm. Resolution Comparison of beam diameter Previous 3 μm 1.18 mil inearity Image Sampling
3 983 Ultra High-speed High-precision aser Sensor SERIES FIBER PHOTO MICRO PHOTO AREA IGHT CURTAINS PRESSURE / FOW INDUCTIVE PROXIMITY PARTICUAR USE SENSOR OPTIONS SIMPE UNITS MEASUREMENT STATIC CONTRO DEVICES SYSTEM AYOUT Data buffering function Using this function, about 65, pieces of measurement value data can be temporarily stored. All of this stored data can be utilized for comparison or analysis by loading it into computers. API provided free of charge (Application Programming Interface) The API can be used to control the from a personal computer connected via USB. Sample programs are also available to make program development easier. Download sample programs from the website of Panasonic Electric Works SUNX ( USB. RS-3C (Exclusive wire) Analog voltage / current output Console PC Measurement device, etc. ENDOSCOPE RS-3C MARKERS PC / TERMINAS HUMAN INTERFACES ENERGY CONSUMPTION VISUAIZATION FA VISION I/O PC, etc. Devices such as relays & switches UV CURING Selection Guide aser Magnetic Collimated Digital Panel Metal-sheet Double-feed Detection H-G1 Console Easy to operate using the touch panel and simple display. Intelligent Monitor Waveform monitoring and function setting by computer at great convenience H-C1 M1 Not only measurement values, but also the wavelength of the amount of light received can be displayed. ight receiving intensity in waveform display Buffering display
4 Ultra High-speed High-precision aser Sensor SERIES 984 ORDER GUIDE s Type Appearance Small beam spot type inear beam spot type Small beam spot type inear beam spot type Small beam spot type inear beam spot type Measurement center distance and measuring range 1 ±1 mm.394 ±.39 in 3 ±5 mm ±.197 in 11 ±15 mm ±.591 in Resolution size Model No. aser class.1 µm.4 mil ø µm 5 µm ø.787 mil approx..1 mil 1F 1FE.1 µm.4 mil 7 µm 1F-MK 5 µm mil approx..1 mil 1FE-MK.5 µm.1 mil ø3 µm 3F 5 µm ø1.181 mil approx..1 mil 3FE.5 µm.1 mil 3 1, µm 3F-MK 5 µm mil approx..1 mil 3FE-MK.1 µm.4 mil 11F 5 µm.1 mil ø8 µm 11FE.1 µm ø3.15 mil approx..4 mil 11F5 5 µm.1 mil 11F5E.1 µm.4 mil 11F-MK 5 µm.1 mil 8 1,7 µm 11FE-MK.1 µm mil approx..4 mil 11F5-MK 5 µm.1 mil 11F5E-MK FDA: Class I IEC: Class 1 FDA: Class II IEC: Class FDA: Class II IEC: Class FDA: Class IIIa IEC: Class 3R FDA: Class II IEC: Class FDA: Class IIIa IEC: Class 3R s High-resolution ow-resolution Options Type Appearance Model No. NPN output PNP output NPN output PNP output Compact consoles Type Appearance Model No. English display Japanese display Chinese display Korean display Designation Appearance Model No. Description Intelligent monitor C C-P CE CE-P AiM Applicable sensor head 1F(-MK) 3F(-MK) 11F(-MK) 11F5(-MK) 1FE(-MK) 3FE(-MK) 11FE(-MK) 11F5E(-MK) DP-EX DP DP-CH DP-KR Enables the waveform display of each measurement condition setting and of measurement values as well as monitoring of measurement data and received light intensity data. ND filter F1 When the amount of reflected light is large at the time that a specular reflective sensor is installed, reducing the amount of laser light to an appropriate level enables a higher precision measurement. (ight detection rate: 98 %) extension cable CCJ CCJ5 CCJ1 CCJ CCJ3 ength: m 6.56 ft, Weight: kg approx. ength: 5 m ft, Weight:.4 kg approx. Cabtyre cable with connector on both ends ength: 1 m 3.88 ft, Weight:.7 kg approx. Cable outer diameter: ø6.6 mm ø6 in Connector outer diameter: ø14.7 mm ength: m ft, Weight: 1.4 kg approx. ø.579 in max. ength: 3 m ft, Weight:. kg approx.
5 985 Ultra High-speed High-precision aser Sensor SERIES FIBER MICRO AREA IGHT CURTAINS PRESSURE / FOW INDUCTIVE PROXIMITY PARTICUAR USE SENSOR OPTIONS SIMPE UNITS MEASURE- MENT STATIC CONTRO DEVICES ENDOSCOPE MARKERS PC / TERMINAS HUMAN INTERFACES ENERGY CONSUMPTION VISUAIZATION FA VISION UV CURING Selection Guide aser Magnetic Collimated Digital Panel Metal-sheet Double-feed Detection H-G1 H-C1 M1 SPECIFICATIONS s Type Small beam spot type Item Model No. 1F(E) 3F(E) 11F(E) 11F5(E) Setup mode Specular reflective Diffuse reflective Specular reflective Diffuse reflective Specular reflective Diffuse reflective Specular reflective Measurement center distance 1 mm.394 in 3 mm in 6.4 mm 1.39 in 11 mm in 16.7 mm 4.1 in 11 mm in 16.7 mm 4.1 in Measuring range (Note 3) ±1 mm ±.39 in ±5 mm ±.197 in ±4.6 mm ±.181 in ±15 mm ±.591 in ±14.5 mm ±.571 in ±15 mm ±.591 in ±14.5 mm ±.571 in Resolution [Average number of samples] (Note 4).4 μm.16 mil [56].1 μm.4 mil [4,96] (1FE: 5 μm.1 mil [56]).1 μm.4 mil [56].5 μm.1 mil [4,96] (3FE: 5 μm.1 mil [56]) inearity (Note 5) ±. % F.S. ±.3 % F.S. Temprerature characteristics ight source Class 1 (IEC / JIS / FDA, aser Notice No.5), Max. output:.1 mw.1 % F.S./ C.4 μm.16 mil [56].1 μm.4 mil [4,96] (11FE and 11F5E: 5 μm.1 mil [56]) Red semiconductor laser (Peak emission wavelength: 658 nm.6 mil) Class (IEC / JIS), Class II (FDA) Max. output: 1 mw size (Note 6) ø μm ø.787 mil approx. ø3 μm ø1.181 mil approx. ø8 μm ø3.15 mil approx. Receiving element Indicator Environmental resistance Cable aser emission Measuring range Pollution degree Protection inear image sensor Green ED (lights up during laser emission) Class 3R (IEC / JIS), Class IIIa (FDA) Max. output: 5 mw Yellow ED (lights up when near the measurement center distance, blinks when within the measuring range, and lights out when outside of the measuring range.) 3 (Industrial environment) IP67 (IEC) (excluding the connector) Ambient temperature to +45 C +3 to +113 F (No dew condensation), Storage: to +7 C 4 to +158 F Ambient humidity Ambient illuminance Vibration resistance Shock resistance Cable extension Material 35 to 85 % RH, Storage: 35 to 85 % RH Incandescent light: 3, lx at the light-receiving face 1 to 55 Hz (period: 1 min.) frequency, 1.5 mm.59 in amplitude in X,Y and Z directions for two hours each 196 m/s acceleration ( G approx.) in X,Y and Z directions for three times each Cabtyre cable,.5 m 1.64 ft long with connector Extension up to total 3 m ft is possible, with optional cable. Enclosure: Die-cast aluminum, Case cover: Die-cast aluminum, Front cover: Glass Weight 5 g approx. (including cable) 3 g approx. (including cable) Accessory English warning label: 1 set [The FDA regulations conforming type includes a set of both the IEC label (written in English) and JIS label (written in Japanese)]. Notes: 1) 1F, 3F, 11F, 11F5 fall under the Japanese Export Control. These products are introduced to limited countries only. Please refer to PRECAUTIONS FOR PROPER USE. ) Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 4 V DC, ambient temperature + C +68 F, sampling rate 4 µs, average number of samples: 56, object measured at measurement center distance is made of white ceramic [an aluminum vapor deposition surface reflection mirror was used 1F(E)] and digital measurement values. 3) Measuring range at sampling periods of μs and 1 μs is as follows. Model No. 1F(E) 3F(E) 11F(E), 11F5(E) Setup mode Specular reflective Diffuse reflective Specular reflective Diffuse reflective Specular reflective Sampling μs 1 μs +.1 to +1. mm +.4 to +.39 in +.8 to +1. mm +.3 to +.39 in to +5. mm to in +3.8 to +5. mm +.15 to in to +4.6 mm to in +3.6 to +4.6 mm +.14 to in +.5 to +15. mm +. to in +1.5 to +15. mm +.49 to in +.5 to mm +. to in +1.5 to mm +.49 to in 4) The P-P value for the deviation in the digital measurement values at the measurement center range has been converted for the measurement center distance. 5) Indicates error with respect to the ideal linear values for digital displacement output when standard objects were measured by our company. It may vary depending on the types of objects being measured. 6) This beam diameter is the size at the measurement center distance. These values were defined by using 1/e (13.5 %) of the center light intensity. If there is a slight leakage of light outside the normal spot diameter and if the periphery surrounding the sensing point has a higher reflectivity than the sensing point itself, then the results may be affected.
6 Ultra High-speed High-precision aser Sensor SERIES 986 SPECIFICATIONS s Item Type inear beam spot type Model No. 1F(E)-MK 3F(E)-MK 11F(E)-MK 11F5(E)-MK Setup mode Specular reflective Diffuse reflective Specular reflective Diffuse reflective Specular reflective Diffuse reflective Specular reflective Measurement center distance 1 mm.394 in 3 mm in 6.4 mm 1.39 in 11 mm in 16.7 mm 4.1 in 11 mm in 16.7 mm 4.1 in Measuring range (Note 3) ±1 mm ±.39 in ±5 mm ±.197 in ±4.6 mm ±.181 in ±15 mm ±.591 in ±14.5 mm ±.571 in ±15 mm ±.591 in ±14.5 mm ±.571 in Resolution [Average number of samples] (Note 4).4 μm.16 mil [56].1 μm.4 mil [4,96] (1FE-MK: 5 μm.1 mil [56]).1 μm.4 mil [56].5 μm.1 mil [4,96] (3FE-MK: 5 μm.1 mil [56]).4 μm.16 mil [56].1 μm.4 mil [4,96] (11FE-MK and 11F5E-MK: 5 μm.1 mil [56]) inearity (Note 5) ±. % F.S. ±.3 % F.S. Temprerature characteristics ight source size (Note 6) Receiving element Indicator aser emission Measuring range Class 1 (IEC / JIS / FDA, aser Notice No.5), Max. output:.1 mw 7 μm mil approx..1 % F.S./ C Red semiconductor laser (Peak emission wavelength: 658 nm.6 mil) Class (IEC / JIS), Class II (FDA) Max. output: 1 mw 3 1, μm mil approx. inear image sensor Green ED (lights up during laser emission) Class 3R (IEC / JIS), Class IIIa (FDA) Max. output: 5 mw 8 1,7 μm mil approx. Yellow ED (lights up when near the measurement center distance, blinks when within the measuring range, and lights out when outside of the measuring range.) Environmental resistance Pollution degree 3 (Industrial environment) Protection IP67 (IEC) (excluding the connector) Ambient temperature to +45 C +3 to +113 F (No dew condensation), Storage: to +7 C 4 to +158 F Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH Ambient illuminance Incandescent light: 3, lx at the light-receiving face Vibration resistance 1 to 55 Hz (period: 1 min.) frequency, 1.5 mm.59 in amplitude in X,Y and Z directions for two hours each Shock resistance 196 m/s acceleration ( G approx.) in X,Y and Z directions for three times each Cable Cabtyre cable,.5 m 1.64 ft long with connector Cable extension Extension up to total 3 m ft is possible, with optional cable. Material Enclosure: Die-cast aluminum, Case cover: Die-cast aluminum, Front cover: Glass Weight 5 g approx. (including cable) 3 g approx. (including cable) Accessory English warning label: 1 set [The FDA regulations conforming type includes a set of both the IEC label (written in English) and JIS label (written in Japanese)]. Notes: 1) 1F-MK, 3F-MK, 11F-MK, 11F5-MK fall under the Japanese Export Control. These products are introduced to limited countries only. Please refer to PRECAUTIONS FOR PROPER USE. ) Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 4 V DC, ambient temperature + C +68 F, sampling rate 4 µs, average number of samples: 56, object measured at measurement center distance is made of white ceramic [an aluminum vapor deposition surface reflection mirror was used 1F(E)-MK] and digital measurement values. 3) Measuring range at sampling periods of μs and 1 μs is as follows. Model No. 1F(E)-MK 3F(E)-MK 11F(E)-MK, 11F5(E)-MK Setup mode Specular reflective Diffuse reflective Specular reflective Diffuse reflective Specular reflective Sampling μs 1 μs +.1 to +1. mm +.4 to +.39 in +.8 to +1. mm +.3 to +.39 in to +5. mm to in +3.8 to +5. mm +.15 to in to +4.6 mm to in +3.6 to +4.6 mm +.14 to in +.5 to +15. mm +. to in +1.5 to +15. mm +.49 to in +.5 to mm +. to in +1.5 to mm +.49 to in 4) The P-P value for the deviation in the digital measurement values at the measurement center range has been converted for the measurement center distance. 5) Indicates error with respect to the ideal linear values for digital displacement output when standard objects were measured by our company. It may vary depending on the types of objects being measured. 6) This beam diameter is the size at the measurement center distance. These values were defined by using 1/e (13.5 %) of the center light intensity. If there is a slight leakage of light outside the normal spot diameter and if the periphery surrounding the sensing point has a higher reflectivity than the sensing point itself, then the results may be affected.
7 987 Ultra High-speed High-precision aser Sensor SERIES FIBER MICRO AREA IGHT CURTAINS SPECIFICATIONS s Type NPN output type PNP output type Item Model No. C(E) C(E)-P Connectale sensor head Number of connectable units: Max. units. Supply voltage 4 V DC ±1 % including ripple. (P-P) 5 ma approx. at sensor heads connected Current consumption 35 ma approx. at 1 sensor head connected (1 ma approx. is additionally required when the mini console is connected) PRESSURE / FOW INDUCTIVE PROXIMITY PARTICUAR USE SENSOR OPTIONS SIMPE UNITS MEASURE- MENT STATIC CONTRO DEVICES Sampling cycle Analog output Voltage (Note ) Current (Note 3) Alarm output Output operation 1 µs, µs, 4 µs, 1 µs, µs, 4 µs, 1 ms, ms Voltage output scale: 5 to +/F.S (initial value) Output range during normal status: 1. to +1. V Output at abnormal status: 1.8 V or +1.8 V Resolution: mv, inearity: ±.5 % F.S. Max. ma, output impedance 5 Ω, Response delay time: 1.5 µs/v approx. Current output scale: 4 to ma/f.s (initial value) Output range during normal status: to 4 ma Output at abnormal status: 1 ma or 5 ma Resolution: 3 µa, inearity ±.5% F.S. impedance: 5 Ωmax., Response delay time: 1 µs approx. NPN open-collector transistor Maximum sink current: 1 ma Applied voltage: 3 V DC or less [between alarm output and Common( )] Residual voltage: 1 V or less (at 1 ma sink current) Opened when the amount of light is insufficient PNP open-collector transistor Maximum source current: 1 ma Applied voltage: 3 V DC or less (between alarm output and +V) Residual voltage: 1 V or less (at 1 ma source current) ENDOSCOPE Short-circuit protection Incorporated MARKERS PC / TERMINAS HUMAN INTERFACES ENERGY CONSUMPTION VISUAIZATION FA VISION UV CURING Selection Guide aser Magnetic Collimated Digital Panel Metal-sheet Double-feed Detection H-G1 Judgment output (HI, GO, O) Output operation Short-circuit protection Strobe output Output operation Short-circuit protection Remote interlock input aser control input Zero set input NPN open-collector transistor Maximum sink current: 1 ma Applied voltage: 3 V DC or less [between judgment output to Common( )] Residual voltage: 1 V or less (at 1 ma sink current) NPN open-collector transistor Maximum sink current: 1 ma Applied voltage: 3 V DC or less [between strobe output to Common( )] Residual voltage: 1 V or less (at 1 ma sink current) aser emission is delayed when connected to Common ( ). aser emission stop at open Applied voltage: 3 V DC or less (eak current:.1 ma or less) aser emission is stopped when connected to Common ( ). aser is emitted immediately after opened. Applied voltage: 3 V DC or less (eak current:.1 ma or less) Zero set is ON when connected with Common ( ). Zero set turns to OFF after continuously connected to Common ( ) for one second. Applied voltage: 3 V DC or less (eak current:.1 ma or less) Opened at output operation Incorporated Opened at data determination Incorporated PNP open-collector transistor Maximum source current: 1 ma Applied voltage: 3 V DC or less (between judgment output to +V) Residual voltage: 1 V or less (at 1 ma source current) PNP open-collector transistor Maximum source current: 1 ma Applied voltage: 3 V DC or less (between strobe output to +V) Residual voltage: 1 V or less (at 1 ma source current) aser emission is delayed when connected to I (+). aser emission stop at open Applied voltage: 3 V DC or less (eak current:.1 ma or less) aser emission is stopped when connected to external power (+). aser is emitted immediately after opened. Applied voltage: 3 V DC or less (eak current:.1 ma or less) Zero set is ON when connected with external power (+). Zero set turns to OFF after continuously connected to external power (+) for one second. Applied voltage: 3 V DC or less (eak current:.1 ma or less) H-C1 M1 Timing input ON at/during connection to Common ( ) (depending on analysis mode) Applied voltage: 3 V DC or less (eak current:.1 ma or less) ON at/during connection to external power (+) (depending on analysis mode) Applied voltage: 3 V DC or less (eak current:.1 ma or less) Reset input Reset is done when connected to Common ( ). Applied voltage: 3 V DC or less (eak current:.1 ma or less) Reset is done when connected to external power (+). Applied voltage: 3 V DC or less (eak current:.1 ma or less) Memory change input Memory is specified when connected to Common ( ). Applied voltage: 3 V DC or less (eak current:.1 ma or less) Memory is specified when connected to external power (+). Applied voltage: 3 V DC or less (eak current:.1 ma or less)
8 Ultra High-speed High-precision aser Sensor SERIES 988 SPECIFICATIONS s Item Indicator Power A aser radiation B aser radiation Type NPN output type PNP output type Model No. C(E) C(E)-P Green ED (lights up at power on) Green ED (lights up during or immediately before laser emission of sensor head A) Green ED (lights up during or immediately before laser emission of sensor head B) Alarm 1 Red ED (lights up when OUT1 can not be measured due to insufficient amount of light) Alarm Red ED (lights up when OUT can not be measured due to insufficient amount of light) RS-3C interface Baud rate: 9,6, 19,, 38,4, 115, bit/s USB interface USB. Full-speed (USB 1.1 compatible) compliant Setting / data display Compact console (optional) Environmental resistance Ambient temperature to +5 C +3 to +1 F (No dew condensation or icing allowed), Storage: to +7 C 4 to +158 F Ambient humidity 35 to 85 %RH Vibration resistance 1 to 55 Hz frequency (period: 1 min.),.75 mm.3 in amplitude in X, Y and Z directions for 3 min. each Shock resistance 196 m/s acceleration (G approx.) in X, Y, and Z directions for three times each Material Case: Polycarbonate Weight 45 g approx. Accessories CD-ROM: 1 pc., USB cable ( m 6.56 ft long): 1 pc., Short bracket: 1 pc. Notes: 1) C and C-P fall under the Japanese Export Control. These products are introduced to limited countries only. Please refer to PRECAUTIONS FOR PROPER USE. ) The linearity is F.S.= V to digital measurement value. Response delay time is the period after update of measurement value. 3) The linearity is F.S.=16 ma to digital measurement value. Response delay time is the period after update of measurement value. Compact console Item Power Display element Type English display Japanese display Chinese display Korean display Model No. DP-EX DP DP-CH DP-KR Supplied by controller STN monochrome CD Display Touch panel Environmental resistance Back light White ED Display range to anguage English Japanese Chinese Korean Operational force.5 N or less ifetime 1,, times or more (Note 1) Environment resistance IP65 (at initial status) (Note ) Dust prevention and drip-proof at the front panel (waterproof packing is used at the contact surface to board) Ambient temperature to +5 C +3 to +1 F (No dew condensation or icing allowed), Storage: to +6 C 4 to +14 F Ambient humidity Electrostatic noise resistance Vibration resistance Shock resistance to 85 %RH, Storage: 1 to 85 %RH 5, V or more (panel surface) 1 to 55 Hz frequency,.75 mm.3 in amplitude in X, Y and Z directions for 1 min. each 98 m/s or more acceleration (1G approx.) in X, Y and Z directions for four times each Material Weight Case: PPE, Front protective sheet: Polyester 3 g approx. Accessories Connector cable for connecting the controller to the console : 1 pc., Mounting bracket: 1 set Notes: 1) This value indicates the average lifetime of the unit when used under a normal temperature of +5 C +77 F. ) When reinstalling the console, replace the water proof packing. (Part No: AIGT181, 1 packs included)
9 989 Ultra High-speed High-precision aser Sensor SERIES FIBER MICRO AREA IGHT CURTAINS PRESSURE / FOW INDUCTIVE PROXIMITY PARTICUAR USE SENSOR OPTIONS SIMPE UNITS MEASURE- MENT STATIC CONTRO DEVICES ENDOSCOPE MARKERS PC / TERMINAS HUMAN INTERFACES ENERGY CONSUMPTION VISUAIZATION FA VISION UV CURING Selection Guide aser Magnetic Collimated Digital Panel Metal-sheet Double-feed Detection H-G1 I/O CIRCUIT AND WIRING DIAGRAMS (CONTROERS) NPN output type Main circuit 1 ma max 1 ma max 1 ma max 1 ma max 1 ma max intemal circuit 4 V Alarm output A1, A Strobe output ST1, ST Judgment output HI1, HI Judgment output GO1, GO Judgment output O1, O Common( ) Zero set input ZS1, ZS Timing input TM1, TM Rest input RS1, RS Memory change input M~M3 aser control input SRA, SRB Remote interlock input I Common( ) V FG *1 NPN open-collector Non-voltage input transistor output IN IN or Common( ) Common( ) Analog output (Common in NPN output type and PNP output type) Main circuit 5 Ω +1 V DC * * Extemal connection example Non-voltage input I Common( ) External power 3 V DC or less Main unit power 4 V DC ±1 % *1 Analog input device 1.8 to +1.8 V (V) Voltage output AGND AGND 1 to 5 ma (I) Current output PNP output type Main circuit 1 ma max 1 ma max 1 ma max 1 ma max 1 ma max intemal circuit 4 V Common(+) Alarm output A1, A Strobe output ST1, ST Judgment output HI1, HI Judgment output GO1, GO Judgment output O1, O Common( ) Zero set input ZS1, ZS Timing input TM1, TM Rest input RS1, RS Memory change input M~M3 aser control input SRA, SRB Remote interlock input I+ Remote interlock input I Common( ) V FG *1 * Non-voltage input IN Common( ) or PNP open-collector transistor output IN Common( ) * Extemal connection example Non-voltage input I + I *1 External power 3 V DC or less Main unit power 4 V DC ±1 % H-C1 M1 intemal circuit AGND AGND Extemal connection example Notes: 1) Do not short-circuit analog output terminals or apply voltage to them. ) Use shielded wires for analog outputs.
10 Ultra High-speed High-precision aser Sensor SERIES 99 I/O CIRCUIT AND WIRING DIAGRAMS (CONTROERS) Terminal arrangement Terminal block 1 Terminal block 3 Terminal block Terminal block 1 Terminal block Terminal block 3 Terminal NPN PNP (V)1 AGND (I)1 (V) AGND (I) SRA SRB I Function Analog voltage output (for OUT1) Analog ground Analog current output (for OUT1) Analog voltage output (for OUT) Analog ground Analog current output (for OUT) aser control input (for Head A) aser stop during short circuit aser control input (for Head B) aser stop during short circuit ( ) Common ( ) I- Remote interlock aser stop when opened. ( ) I+ Remote interlock common Terminal NPN PNP ZS TM RS Function Zero set input (for OUT) ON during short circuit (Note 1) Timing input (for OUT) ON during short circuit Reset input (for OUT) ON during short circuit ( ) Common ( ) A ST HI GO O Alarm output (for OUT) Strobe output (for OUT) Judgment HI output (for OUT) Judgment GO output (for OUT) Judgment O output (for OUT) Reserved terminal (Note ) ( ) (+) Common ( ) / Common (+) Terminal NPN PNP ZS1 TM1 RS1 Function Zero set input (for OUT1) ON during short circuit (Note 1) Timing input (for OUT1) ON during short circuit Reset input (for OUT1) ON during short circuit Reserved terminal Reserved terminal ( ) Common ( ) A1 ST1 HI1 GO1 O1 Alarm output (for OUT1) Strobe output (for OUT1) Judgment HI output (for OUT1) Judgment GO output (for OUT1) Judgment O output (for OUT1) M M1 M Memory change (16 ways) Reserved terminal (Note ) ( ) (+) Common ( ) / Common (+) 4V 4 V DC input for power supply SENSING CHARACTERISTICS (TYPICA) M3 ( ) Common ( ) Notes: 1) Turn off the terminal in case short circuit lasts for more than one second. ) Do not connect anything to the reserved terminals; they are connected to the internal circuit. V Power supply ground V FG Frame ground Notes: 1) Turn off the terminal in case short circuit lasts for more than one second. ) Do not connect anything to the reserved terminals; they are connected to the internal circuit. 1F(E) Correlation between measuring distance and error characteristics Setup mode: Specular reflective Aluminum vapor deposition surface reflection mirror (, ±.5 ) Vertical orientation + Aluminum vapor deposition surface reflection mirror (, ± ) Horizontal orientation + Vertical positioning Sampling rate: 4 μs Average number of.5 samples: Horizontal positioning.4 + Sampling rate: 4 μs Average number of samples:
11 991 Ultra High-speed High-precision aser Sensor SERIES FIBER MICRO AREA IGHT CURTAINS PRESSURE / FOW INDUCTIVE PROXIMITY PARTICUAR USE SENSOR OPTIONS SIMPE UNITS MEASURE- MENT STATIC CONTRO DEVICES ENDOSCOPE MARKERS PC / TERMINAS HUMAN INTERFACES ENERGY CONSUMPTION VISUAIZATION FA VISION UV CURING Selection Guide aser Magnetic Collimated Digital Panel Metal-sheet Double-feed Detection H-G1 H-C1 M1 SENSING CHARACTERISTICS (TYPICA) 3F(E) Correlation between measuring distance and error characteristics Setup mode: Diffuse reflective White ceramic (, ±1 ) Vertical orientation + Setup mode: Specular reflective Aluminum vapor deposition surface reflection mirror (, ±.5 ) Vertical orientation + 11F(E) 11F5(E) White ceramic (, ±1 ) Horizontal orientation + Aluminum vapor deposition surface reflection mirror (, ± ) Horizontal orientation + Vertical positioning Sampling rate: 4 μs Average number of samples: 56 Vertical positioning Sampling rate: 4 μs Average number of samples: 56 Correlation between measuring distance and error characteristics Vertical positioning Horizontal positioning.4.4 Setup mode: Diffuse reflective +1 1 Sampling rate: 4 μs Average number of samples: White ceramic (, ±1 ) Vertical orientation + + Setup mode: Specular reflective Aluminum vapor deposition surface reflection mirror (, ±.1 ) Vertical orientation + White ceramic (, ±1 ) Horizontal orientation Aluminum vapor deposition surface reflection mirror (, ±.5 ) Horizontal orientation + PRECAUTIONS FOR PROPER USE This catalog is a guide to select a suitable product. Be sure to read instruction manual attached to the product prior to its use. For CE marking compliance, a sensor head, controller and console with the mark attached must be used together. Check that the mark is attached to each device to be connected Vertical positioning Sampling rate: 4 μs Average number of.1 samples: Horizontal positioning Sampling rate: 4 μs Average number of samples: 56 Horizontal positioning.4 + Sampling rate: 4 μs Average number of samples: Sampling rate: 4 μs Average number of samples: Horizontal positioning Sampling rate: 4 μs Average number of.5 samples: Refer to General precautions and About laser beam. Never use this product as a sensing device for personnel protection. In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country
12 Ultra High-speed High-precision aser Sensor SERIES 99 PRECAUTIONS FOR PROPER USE 1F 3F, 11F 11F5 Do not operate products using methods other than those described in the instruction manual included with each product. Control or adjustment through procedures other than those specified may cause hazardous laser radiation exposure. The following labels are attached to the products. Handle each product according to the instruction given on the warning label. This product is classified as a Class 1 aser Product in IEC / JIS standards and a Class I aser Product in FDA regulations 1 CFR Do not look at the laser beam through optical devices such as a lens. This product is classified as a Class aser Product in IEC / JIS standards and a Class II aser Product in FDA regulations 1 CFR Do not look at the laser beam directly or through optical devices such as a lens. This product is classified as a Class 3R aser Product in IEC / JIS standards and a Class IIIa aser Product in FDA regulations 1 CFR Never directly look at or touch the laser beam or its reflection. Below mentioned products fall under Japanese Export Control, which is defined by Foreign Exchange and Foreign Trade Act. Therefore, anyone who wishes to export or transfer these products outside of Japan is required to obtain the necessary license from the Ministry of Economy, Trade and Industry of Japan. Also, these products fall under international export control regulations, such as Nuclear Suppliers Group (NSG) guidelines 1.B.3.b.1 and Wassenaar Arrangement (WA).B.6.b.1.a, and are objects of the regulation. Please comply with the export control in each country. Products subject to control : 1F, 1F-MK, 3F, 3F-MK, 11F, 11F-MK, 11F5, 11F5-MK : C, C-P Note: These products are introduced to limited countries only. Please contact our office for details. size (Unit: mm in) 1F(E) Small beam spot type Measurement center distance Measuring range F(E) Small beam spot type Measurement center distance Measuring range F(E) Small beam spot type Measurement center distance Measuring range Refer to General precautions and About laser beam F(E)-MK inear beam spot type Measurement center distance Measurement center distance Measuring range Measuring range F(E)-MK inear beam spot type Measurement center distance Measuring range F(E)-MK inear beam spot type
13 993 Ultra High-speed High-precision aser Sensor SERIES FIBER MICRO AREA IGHT CURTAINS PRECAUTIONS FOR PROPER USE Mutual interference When installing two or more sensor heads side by side, mutual interference will not occur if the laser spots from other sensor heads do not fall within the shaded areas of the sensor head in the figure below. When connecting two sensor heads to one controller, the mutual interference prevention function can be used. Therefore the measures shown below are not necessary. Refer to General precautions and About laser beam. mounting direction To obtain the greatest precision, the sensor head should be oriented facing the direction of movement of the object s surface, as shown in the figure below. Object with variations in material or color PRESSURE / FOW 3F INDUCTIVE PROXIMITY PARTICUAR USE SENSOR OPTIONS SIMPE UNITS MEASURE- MENT STATIC CONTRO DEVICES 11F (Unit: mm in) Rotating object ENDOSCOPE MARKERS PC / TERMINAS HUMAN INTERFACES ENERGY CONSUMPTION VISUAIZATION FA VISION Object that has large differences in gaps, grooves and colors UV CURING Selection Guide aser Magnetic Collimated Digital Panel Metal-sheet Double-feed Detection H-G (Unit: mm in) Safety standards for laser beam products A laser beam can harm human being s eyes, skin, etc., because of its high energy density. IEC has classified laser products according to the degree of hazard and the stipulated safety requirements. The series is classified as Class 1 / Class / Class 3R laser. (Refer to About laser beam.) H-C1 M1 Safe use of laser products For the purpose of preventing users from suffering injuries by laser products, IEC 685-1(Safety of laser products). Kindly check the standards before use. (Refer to About laser beam.)
14 Ultra High-speed High-precision aser Sensor SERIES 994 PRECAUTIONS FOR PROPER USE Fuctional description Refer to General precautions and About laser beam Description aser emission indicator (Green ED) Measurement range indicator (Yellow ED) Function ights up during laser emission. 3 ight emitter Emits the laser light. 4 ight receiver 5 Warning label ights up when the target reaches at approximately center of the measurement. Blinks when the target enters within the measurement range. Turns off the light when the target goes out of the measurement range. Receives the laser specular light from a measurement target. Shows the laser emission position. Please read carefully before use. 1 3 Description POWER indicator AM1 (Alarm) indicator AM (Alarm) indicator Function ights up in green when electricity is provided to the controller. Abnormal condition indicator for OUT1. ights up in red during dark status (poor light intensity) of OUT1 or the sensor head is in unconnected status. Abnormal condition indicator for OUT. ights up in red during dark status (poor light intensity) of OUT or the sensor head is in unconnected status. 4 A indicator ights up in green during the laser radiation of Head A. 5 B indicator ights up in green during the laser radiation of Head B Analog output terminal aser control terminal Remote interlock terminal Terminal for analog data output. Stops laser emission in case of short-circuiting. Stops laser emission when its opened. 9 USB connector Used for communication with PC using USB Console connection connector RS-3C connector 1 I/O terminal Used for connecting the mini console. Used for communication with the control devices using RS-3C. Terminal for various I/O (Zero set input, Timing input, Reset input, Alarm output, Strobe output, and Judgment output) and memory change. 13 Power terminal Terminal for power supply to the controller A connection connector B connection connector 13 DIN rail mounting hook 16 recognizes a sensor head which is connected to this connector as A and starts operation. recognizes a sensor head which is connected to this connector as B and starts operation. Used for hooking/removing the sensor heads to/from the 35mm width DIN rail with one-touch simple operation. Note: In case of connecting one sensor head to the controller, be sure to connect the sensor head to 14 the sensor head A connection (HEAD A) side. If the sensor head is connected to 15 the sensor head B connection (HEAD B) side, the measurement cannot be performed
15 995 Ultra High-speed High-precision aser Sensor SERIES FIBER MICRO AREA IGHT CURTAINS PRESSURE / FOW INDUCTIVE PROXIMITY PARTICUAR USE SENSOR OPTIONS SIMPE UNITS MEASURE- MENT STATIC CONTRO DEVICES ENDOSCOPE MARKERS PC / TERMINAS HUMAN INTERFACES ENERGY CONSUMPTION VISUAIZATION FA VISION DIMENSIONS (Unit: mm in) 1F(E) 1F(E)-MK Set mode: Specular reflective type emitting 1.63 axis receiving axis 75 Measurement ( center distance ) Set mode: Diffuse reflective type F(E) 3F(E)-MK attenuator ( ) -M5 Measurement center distance (3.6.14) emitting axis receiving axis ( ) (55) ( ).866 ( ) ø6.6 ø M5 Mounting holes, deep (for both sides) Mounting holes, deep (for both sides) ø6.6 ø (ø14.7 ø.579) The CAD data in the dimensions can be downloaded from our website. ( ) ø14.7 ø.579 Set mode: Specular reflective type emitting axis receiving axis Measurement ( ) center distance ( ) (.5.98) (.14) UV CURING Selection Guide aser Magnetic Collimated Digital Panel Metal-sheet Double-feed Detection H-G1 H-C1 M1 11F (E) 11F (E)-MK Set mode: Diffuse reflective type attenuator Measurement (.5.98) ( center distanoe ) -M (3.6.14) receiving axis -emitting axis (.185) Mounting holes deep (for both sides) (55) ø6.6 ø ( ) ø14.7 ø.579 Set mode: Specular reflective type ( ) Measurement center distanoe emitting axis receiving axis ( ) (.14 ) 3.4 (.134 )
16 Ultra High-speed High-precision aser Sensor SERIES DIMENSIONS (Unit: mm in) C(E) C(E)-P ( ) The CAD data in the dimensions can be downloaded from our website. DP-EX (Display part) (Packing) Compact console F1 (5.197) Suitable for 35 mm in width DIN rail -ø4.6 ø (4.158) (Panel thickness: 5 mm.197 in) (8.315) Panel cut-out dimensions Note: The panel thickness should be 1 to 5 mm.39 to.197 in. ND filter.866 Mounting drawing with a sensor head Material: Alminum (Mounting retention) Glass (ND part) ( ) (1.6.63) Notes: 1) Mounting cannot be preformed when the beam attenuator of the sensor head is in use. ) 1F (-MK) cannot be mounted.
Ultra High-speed High-precision Laser Displacement Sensor HL-C2 SERIES. panasonic-electric-works.net/sunx
981 Ultra High-speed High-precision Sensor SERIES Related Information General terms and conditions... F-17 Glossary of terms / General precautions... P.1397 / P.145 Sensor selection guide... P.967~ About
More informationUltra High-speed High-precision Laser Displacement Sensor HL-C2 SERIES
171 PHOTO PHOTO MEASURE ITY Ultra High-speed High-precision Sensor SERIES Related Information General terms and conditions... F-7 Glossary of terms / General precautions... P.1493 / P.151 Sensor selection
More informationGA-311 GH SERIES. Compact Inductive Proximity Sensor Amplifier-separated. High-speed response and excellent workability
82 PHOTO PHOTO Compact Inductive Proximity Sensor -separated GA- SERIES General terms and conditions... F-7 Related Information Glossary of terms... P.86~ Sensor selection guide... P.757~ General precautions...
More informationpanasonic.net/id/pidsx/global CCD The sensor can be used for various applications with its binary data output with four different sensing modes.
1123 PHOTO PHOTO PARTICUR Type Edge Sensor SERIES Related Information General terms and conditions... F-3 About laser beam... P.1593~ guide... P.1021~ General precautions... P.1595 Conforming to FDA regulations
More informationUltra-slim Body Picking Sensor NA1-PK5 SERIES NA1-5 SERIES. Even a slim hand is detectable by the 25 mm in pitch beam area sensor
487 FIBER PHOTO MICRO PHOTO AREA IGHT CURTAINS PRESSURE / FOW INDUCTIVE PROXIMITY PARTICUAR USE SENSOR SIMPE UNITS MEASUREMENT STATIC CONTRO DEVICES ENDOSCOPE MARKERS Ultra-slim Body Picking Sensor NA-PK5
More informationGA-311 GH SERIES. Compact Inductive Proximity Sensor Amplifier-separated. High-speed response and excellent workability. IP67G sensor head variations
875 PHOTO PHOTO IT FOW PARTICUAR Compact Inductive Proximity Sensor -separated GA- SERIES General terms and conditions... F-7 Related Information Glossary of terms... P.482~ Sensor selection guide... P.80~
More informationIntroducing the new standard in CMOS laser displacement sensors
NEW Compact Laser Displacement Sensor SERIES Conforming to EMC Directive FDA Introducing the new standard in CMOS laser displacement sensors This single instrument delivers both high-precision measurement
More informationpanasonic.net/id/pidsx/global Introducing the new standard in CMOS laser displacement sensors
123 PHOTO PHOTO MEASURE Compact Sensor SERIES Related Information General terms and conditions... F-3 Conforming to FDA regulations Introducing the new standard in CMOS laser displacement sensors This
More informationEF-S1 SERIES. Continuously check invisible static electricity in lines. Constantly check static in lines!
1215 PHOTO PHOTO SAFETY USE SERIES Related Information General terms and conditions... F- General precautions... P.1595 guide... P.1155~ MEASUREMENT panasonic.net/id/pidsx/global Continuously check invisible
More informationLH-50. High-precision measurement using safe LED beam LED TYPE OPTICAL DISPLACEMENT SENSOR. LH01caE0(00/6/28) 01.2.
LH01caE0(00/6/28) 01.2.14 9:19 PM Page H1 LED TYPE OPTICAL DISPLACEMENT SENSOR High-precision measurement using safe LED beam Conforming to EMC Directive LH01caE0(00/6/28) 01.2.14 9:19 PM Page 1 Minute
More informationLASER. Laser Displacement Transducer. Series LAH-G1. Key-Features:
LASER Laser Displacement Transducer Series LAH-G1 Key-Features: Content: Technical Data...2 Technical Drawing...3 Electrical Connection...4 Order Code...5 ranges up to 300 mm Resolution up to 0.5 μm Protection
More informationAdjustable Range Reflective Photoelectric Sensor Amplifier Built-in
36 FIBER PHOTO MICRO PHOTO AREA LIGHT CURTAINS PRESSURE / FLOW INUCTIVE PROXIMITY PARTICULAR USE SENSOR SIMPLE UNITS MEASUREMENT STATIC CONTROL EVICES ENOSCOPE MARKERS Adjustable Range Reflective Photoelectric
More informationPM2 SERIES. Convergent Reflective Micro Photoelectric Sensor. Convergent reflection sensing ensures stable detection
3 Micro Photoelectric PM SERIES Related Information General terms and conditions...p. Glossary of terms...p.983~ selection guide...p.~ / P.9~ General precautions...p.98~ Amplifier Built-in PHOTO PHOTO
More informationPM2 SERIES. Convergent Reflective Micro Photoelectric Sensor. Convergent reflection sensing ensures stable detection. Hardly affected by background
PHOTO PHOTO USE MEASUREMENT STATIC CONTROL Micro Photoelectric SERIES Related Information General terms and conditions... F- Glossary of terms... P.39~ selection guide... P.~ General precautions... P.0
More informationNPN open-collector transistor (Judgment output) Current / voltage output (Linear output)
Ultra-compact Sensor SERIES 144 ORDER GUIDE s Type Appearance Model No. Output NPN output HL-AC1 NPN open-collector transistor (Judgment output) Current / voltage output (Linear output) PNP output HL-AC1P
More informationPM2 SERIES. Convergent Reflective Micro Photoelectric Sensor. Convergent reflection sensing ensures stable detection
PHOTO PHOTO Micro Photoelectric PM SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.9~ Amplifier Built-in guide... P.393~ General precautions... P.~ Certified MEASURE
More informationPM2 SERIES. Convergent Reflective Micro Photoelectric Sensor. Convergent reflection sensing ensures stable detection
3 Micro Photoelectric PM SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.~ Amplifier Built-in selection guide... P.7~ General precautions... P.8~ PHOTO PHOTO Conforming
More informationPM-24 SERIES. Ultra-small U-shaped Micro Photoelectric Sensor. Extremely small size enables space saving!! ( ) Equipped with two independent outputs
19 Ultra-small Micro Photoelectric Sensor PM- SERIES Related Information General terms and conditions...p.1 Glossary of terms / General precautions...p.98~ / P.98~ Amplifier Built-in Sensor selection guide...p.11~
More informationUltra-compact Laser Collimated Beam Sensor HL-T1 SERIES. Ultra-compact sensor head A high-functionality intelligent controller
1041 FIBER PHOTO MICRO PHOTO AREA LIGHT CURTAINS PRESSURE / FLOW INDUCTIVE PROXIMITY PARTICULAR USE SENSOR SIMPLE UNITS MEASUREMENT STATIC CONTROL DEVICES ENDOSCOPE MARKERS PLC / TERMINALS HUMAN INTERFACES
More informationGL SERIES. Compact & Low Price Inductive Proximity Sensor. Wide variety, high performance in surprisingly small body at low cost.
811 Compact & ow Price Inductive Proximity Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms...p.176~ guide... P.781~ General precautions... P.179~ PHOTO PHOTO MEASURE
More informationNo. 1. The World s in Compactness. Amplifier Built-in Ultra-minute Photoelectric Sensor EX-Z SERIES panasonic.net/id/pidsx/global
Ultra-minute Photoelectric Sensor EX-Z SERIES Conforming to EMC Directive No. 1 The World s in Compactness * Among photoelectric sensors with built-in amplifier, as of June 215 (survey by our company)
More informationUltra-compact Laser Collimated Beam Sensor HL-T1 SERIES. Ultra-compact sensor head A high-functionality intelligent controller
1123 Ultra-compact Sensor SERIES Related Information General terms and conditions... F-7 Glossary of terms / General precautions... P.93 / P.01 Sensor selection guide... P.1055~ About laser beam... P.99~
More informationUltra-small U-shaped Micro Photoelectric Sensor. Extremely small size enables space saving!! 12 mm in
1 Ultra-small Micro Photoelectric PM- SERIES Related Information General terms and conditions... F-17 Glossary of terms / General precautions... P.19~ / P.10 Amplifier Built-in selection guide... P.1~
More informationThe World s in Compactness. * Among photoelectric sensors with built-in amplifier, as of June 2015 (survey by our company)
Amplifier Built-in Ultra-minute Photoelectric Sensor EX-Z SERIES Conforming to EMC Directive Recognition No. 1 The World s in Compactness * Among photoelectric sensors with built-in amplifier, as of June
More informationHigh-speed sampling and high resolution. The new choice for even more variegated data collection and processing.
1023 FIBER PHOTO MICRO PHOTO AREA LIGHT CURTAINS PRESSURE / FLOW INDUCTIVE PROXIMITY PARTICULAR USE SENSOR SIMPLE UNITS MEASUREMENT STATIC CONTROL DEVICES ENDOSCOPE MARKERS PLC / TERMINALS HUMAN INTERFACES
More informationUltra-compact Laser Collimated Beam Sensor HL-T1 SERIES. Ultra-compact sensor head A high-functionality intelligent controller
887 Ultra-compact Beam Sensor SERIES Related Information General terms and conditions... P.1 Sensor selection guide...p.11~ / P.833~ Glossary of terms / General precautions... P.1019 / P.1027 About laser
More informationOne step ahead in performance and mounting ease
95 Micro Photoelectric Amplifier Built-in PM-5 SERIES PM-45 SERIES PM-5 SERIES General terms and conditions... F- guide... P.9~ Related Information Glossary of terms / General precautions...p.1549~ / P.155~
More informationColor Detection Fiber Sensor FZ-10 SERIES. Reliable and precise color discrimination. Red, green and blue LEDs. Easy set up
79 Color Sensor FZ- SERIES FIBER PHOTO MICRO PHOTO AREA LIGHT CURTAINS Related Information General terms and conditions... F-17 Glossary of terms... P.1359~ Sensor selection guide...p.31~ General precautions
More information187 HG-C SERIES panasonic.net/id/pidsx/global Reliable detection in repeatability 10 μm mil Overwhelmingly stable
187 PHOTO PHOTO MEASURE CMOS Type Micro Laser Distance Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms / General precautions.p.1549~ / P.1552~ guide... P.169~ About
More informationGX SERIES. Cylindrical Compact Inductive Proximity Sensor Amplifier Built-in. Robust enclosure and flexible cable types are also available
8 Cylindrical Compact Inductive Proximity SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.86~ selection guide... P.757~ General precautions... P.05 PHOTO PHOTO Conforming
More informationMonitor. Safety relay,etc. Contactor, etc. Uses external device monitoring function Note: Construct a separate reset input circuit.
Selectable safety circuits The light curtain unit has a built-in monitoring function for external devices (such as fused relay monitoring). This supports the construction of light curtain peripheral safety
More informationpanasonic.net/id/pidsx/global Up to 16 I/O devices can be connected at once using MIL connectors
987 PHOTO PHOTO Sensor- Connection System SERIES Related Information General terms and conditions... F-3 LS-500 / LS-400 / DPS-400 / GA-311...P.201~ / P.213~ / P.745~ / P.851~ FX-500 / FX-300 / FX-410
More informationUltra-compact Laser Collimated Beam Sensor HL-T1 SERIES. Ultra-compact sensor head A high-functionality intelligent controller
1041 Ultra-compact Sensor SERIES Related Information General terms and conditions... F-17 Glossary of terms / General precautions... P.1397 / P.05 Sensor selection guide... P.963~ About laser beam... P.03~
More informationNA1-5. Ultra-slim Body 25mm Beam Pitch Area Sensor. Even a Slim Hand Is Detected by the 25mm Pitch Beam Curtain AREA SENSORS.
Ultra-slim Body 2mm Pitch Area Sensor mm Thick: /2 of Conventional Model It fits into a small space, without obstructing normal operation. Clearly Visible Job Indicator Both the emitter and the receiver
More informationConnector Built-in U-shaped Micro Photoelectric Sensor. Approximately 60 % of previous model Detachable
44 Connector Built-in Micro Photoelectric SERIES Related Information General terms and conditions... F-1 Glossary of terms... P.1~ selection guide... P.441~ General precautions... P.140 Amplifier Built-in
More informationCylindrical Compact Inductive Proximity Sensor Amplifier Built-in. panasonic.net/id/pidsx/global
8 PHOTO PHOTO MEASURE Cylindrical Compact Inductive Proximity SERIES Related Information General terms and conditions... F- Glossary of terms... P.576~ panasonic.net/id/pidsx/global guide... P.78~ General
More informationOptimum sensing capability for LCD manufacturing
SENSORS FOR Glass Substrate Detection Sensor Amplifier-separated FX-301-F FT-F9 FD-F7 EX-F70/F60 HD-T1 M FD-L3 Reliable detection of glass substrates Its unique optical system enables detection of transparent
More informationSuitable for detecting transparent films or transparent bottles
Ultrasonic Sensor Suitable for detecting transparent films or transparent bottles Reliable detection of transparent objects The sensor reliably detects transparent films or transparent objects. Only 16
More informationThe World s Smallest TOF Sensor lineup with analog output type
7 New model TOF type with built-in digital panel series The World s Smallest TOF Sensor lineup with analog output type Analog output type and -control-output type The world s smallest TOF sensor Built-in
More informationHigh-speed sampling and high resolution. The new choice for even more variegated data collection and processing.
1105 PHOTO PHOTO High Speed High Accuracy Eddy Current Type Digital Sensor SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.1493 Sensor selection guide... P.1055~ General
More informationHigh-speed sampling and high resolution. The new choice for even more variegated data collection and processing.
1105 High Speed High Accuracy Eddy Current Type Digital Sensor SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.1493 Sensor selection guide... P.1055~ General precautions...
More informationHigh-speed sampling and high resolution. The new choice for even more variegated data collection and processing.
1023 PHOTO PHOTO High Speed High Accuracy Eddy Current Type Digital Sensor SERIES Related Information General terms and conditions... F- Glossary of terms... P.1397 Sensor selection guide... P.967~ General
More informationE3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection method Sensing
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationLong sensing range of 500 mm in (HL-T1005A, HL-T1010A) and 2 m ft (HL-T1001A) are available. Adoption of a Class 1 laser
MEASUREMENT SENSORS SERIES Ultra-compact Laser Collimated Beam Sensor LA LA- LM1 LH- HL-C1 The industry s smallest sensor head A high-ality intelligent controller Conforming to EMC Directive The industry
More informationA line width of approx. 240 mm in (typical) at a 1,000 mm in sensing distance
6 FIBER PHOTO MICRO PHOTO AREA LIGHT CURTAINS PRESSURE / FLOW INDUCTIVE PROXIMITY PARTICULAR USE SENSOR SIMPLE UNITS MEASUREMENT STATIC CONTROL DEVICES ENDOSCOPE MARKERS PLC / TERMINALS HUMAN INTERFACES
More informationConvergent Reflective Micro Photoelectric Sensor
EQ- VF NX PM MS-AJ RT- PX- CY PHOTOELECTRIC SENSORS Mounting Stand Amplifier Built-in SERIES Convergent Reflective Micro Photoelectric Stable detection by convergent reflective mode Stable detection characteristics
More informationAmplifi er-separated. A line width of approx. 240 mm in (typical) at a 1,000 mm in sensing distance
Digital Laser Sensor SERIES Related Information Amplifi er-separated General terms and conditions... P. Sensor selection guide...p.~ / P.~ Glossary of terms / General precautions... P.98 ~ / P.986 ~ About
More informationE3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A CSM_ES-A_DS_E Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection
More informationZX-L-N. A Host of Smart Functions Inside a Compact Body with a Full Range of Laser Types. Smart Sensors (Laser Type) Features
/ Length (Laser Type) A Host of Functions Inside a Compact Body with a Full Range of Laser Types The world s smallest and lightest, with 8 reflective types and through-beam types available. Light-intensity
More informationOil-resistive, Long-range Photoelectric Sensor with Metal Housing
Oil-resistive, Long-range with Metal Housing ES-C Water- and Oil-resistive with Metal Housing Used for Long-range Sensing Satisfies the water- and oil-resistive requirements and safe enough for use in
More informationThe World s Smallest Displacement Sensor!!
Compact laser displacement sensor Series FASTUS is new product brand name from Optex-FA The World s Smallest Displacement!! Innovative size! Built-in controller Performance Fits in any machine 4 Digit
More informationDC 2-wire Cylindrical Inductive Proximity Sensor
SERIES DC -wire Cylindrical Inductive Proximity -wire type available Oil resistant Metal embedding possible Amplifier Built-in GX G-6 High performance & ease of use G-8/8U GA-/GH GX GX-N G-8H/8H G-N Robust
More informationU-shaped Type/Convergent Reflective Type. onlinecomponents.com
PHOTOELECTRIC SENSOR SERIES U-shaped Type/Convergent Reflective Type SS-A SU-7/SH VF NX MS-AJ RT- PX- EX CY Amplifier-separated Type Multi-voltage Type Amplifier Built-in Type Mounting Stand Stable Detection
More informationThe Original Green LED Incorporated Digital Micrometer
The Original Green LED Incorporated Digital Micrometer [New Larger Diameter Head LS-7070(M)] [New Advance Controller LS-7601] [New PC Based Software LS-H1W] High-speed, High-accuracy Digital Micrometer
More informationThe dual display means that the current value and the threshold value, it makes direct setting of threshold value
735 Dual Display Digital Pressure Sensor DPC-L100 SERIES SERIES General terms and conditions... F-3 guide... P.699~ Related Information Glossary of terms... P.1563~ General precautions... P.1566 For Liquid
More informationHead-separated Dual Display Digital Pressure Sensor DPC-L100 SERIES DPH-L100 SERIES. High-precision detection of fluid and air pressure
689 PHOTO PHOTO Dual Display Digital Pressure Sensor DPC-L100 SERIES SERIES General terms and conditions... F-17 Sensor selection guide... P.661~ Related Information Glossary of terms... P.1373~ General
More informationMini Photoelectric Sensor
Mini Photoelectric Sensor High cost-performance Mini Photoelectric Sensor Saves Installation Space and Wiring Effort and Detects Minute Sensing Objects Pin-point beam (1 to 2-mm dia.) makes it possible
More informationRemote I/O Unit with Connectors for Light Curtain CC-Link Safety System. panasonic.net/id/pidsx/global
715 LIGHT CURTAINS / USE Remote I/O Unit with Connectors for Light Curtain CC-Link System General terms and conditions... F-7 Related Information... P.703~ SF4B... P.565~ General precautions... P.1501
More informationEven a specular background does not affect the sensing performance if the sensor is located 30mm away from it (when directly opposite).
SERIES Convergent Reflective Micro Photoelectric Convergent Reflection Sensing Ensures Stable Detection Marked Conforming to EMC Directive Stable Detection by Convergent Reflective Mode Stable detection
More informationUltra-compact long-distance detection sensor
364 New model TOF long-range type series Ultra-compact long-distance detection sensor Max. sensing distance of 4.5 m *With white paper (9%) The world s smallest TOF sensor Capable of stable detection even
More informationSERIES Amplifier Built-in Miniature-size Photoelectric Sensor
PHOTOEECTRIC SENSORS SERIES Amplifier Built-in Miniature-size Photoelectric EQ- Amplifier Built-in Micro-size Type RX -4 EQ- Marked Conforming to EMC Directive (Excluding -DS/DM) RX-S Remarkable Sensing
More informationHigh-speed sampling and high resolution. The new choice for even more variegated data collection and processing.
867 PHOTO PHOTO High Speed High Accuracy Eddy Current Type Digital Sensor SERIES Related Information General terms and conditions... P.1 Glossary of terms... P.1019 Sensor selection guide... P.11~ / P.833~
More informationPlug-in unit extension block One sensor extension block allows four plug-in units to be added. Power cable for sensors. Snap-connector inputs
1 Sensor Block for SC Quick connection of 16 sensors Set of 16 inputs directly hooked up to PLC Up to 16 sensors can be connected on one main block followed by three extension blocks (or one snapconnector
More informationSC SERIES. Up to 16 I/O devices can be connected at once using MIL connectors. Sensor-PLC Connection System WIRE-SAVING UNITS.
SERIES Sensor-PLC Connection System Up to 6 I/O devices can be connected at once using MIL connectors Conforming to EMC Directive Up to 6 I/O devices can be connected at once using MIL connectors Up to
More informationLow Price Rectangular-shaped Inductive Proximity Sensor. The GL-N12 series is recommended to large volume users for cost reduction.
SERIES ow Price Rectangular-shaped Inductive Proximity PNP output Different freq. type available type available mplifier Built-in Wide variety with total cost reduction! G-10/GH GX GX-N GX-U/FU G-18H/18H
More informationLS-500 SERIES. Digital Laser Sensor Amplifier-separated. Industry s smallest* Industry s smallest* + Stainless steel (SUS) enclosure
PHOTO PHOTO MEASURE ITY separated Digital Laser Sensor -separated SERIES Related Information General terms and conditions... F-7 SC-GU... P.985~ About laser beam... P.99~ Industry s smallest* panasonic.net/id/pidsx/global
More informationEX-30SERIES. Threaded Miniature Photoelectric Sensor. The next-generation New Form series. A new alternative to fiber sensors. M4(Reflective type: M6)
EX-3SERIES Threaded Miniature Photoelectric The next-generation New Form series. A new alternative to fiber sensors. Marked Conforming to EMC Directive The EX-3 series have a radically new form which has
More informationE3Z. The New Standard for Compact, Long-range Photoelectric Sensors Conserves Energy and Natural Resources, One Million Sold Yearly
Compact Photoelectric Sensor with Built-in Amplifier EZ The New Standard for Compact, Long-range Photoelectric Sensors Conserves Energy and Natural Resources, One Million Sold Yearly Long sensing distance
More informationPrecise sensing in wide area. Sensing area: mm in Minimum sensing object: "0.1 mm "0.004 in Repeatability: 10!m 0.
MEASUREMENT SENSORS SERIES Laser Collimated Beam Sensor -300 HL-T1 LM LH-0 HL-C1 Safe laser beam This laser collimated beam sensor conforms to the Class 1 laser stipulated in IEC Publication 82 and JIS
More informationModel NPN output PNP output Standard. configuration
Slot-type Photomicrosensor (Non-modulated) *1 EE-SX4/6 CSM_EE-SX4_6_DS_E 1 Global Standard Slot-type photomicrosensors with 0- to 100-mA direct switching capacity. Series includes models that enable switching
More informationE3S-GS/VS. Both Red-light Models and Greenlight Models to Detect a Wide Variety of Colors. Small Spot/Mark Sensor with Built-in Amplifier
Small Spot/Mark Sensor with Built-in Amplifier CSM_E3S-GS_VS_DS_E_2_1 Both Red-light Models and Greenlight Models to Detect a Wide Variety of Colors Be sure to read Safety Precautions on page. Ordering
More informationCompact Inductive Proximity Sensor
SERIES Compact Inductive Proximity Sensor Amplifier Built-in High functionality together with robust housing and flexible cable Miniature is an amplifier built-in inductive proximity sensor having a diameter
More informationThe GL-N12 series is recommended to large volume users for cost reduction. Exclusive mounting bracket. Cost saving. Conventional model.
INDUCTIVE SERIES ow Price Square-shaped Inductive Proximity Wide Variety with Total Cost Reduction! G-6 G-18H/18H Marked Conforming to EMC Directive G-8U Exclusive Mounting Bracket is Needless The series
More informationHigh resolution BGS laser sensor
BGS Sensor with Digital Display Type *FASTUS is a product brand of Optex FA. BGS-HL series : 1output type BGS-HDL series : output type High resolution BGS laser sensor Minimum detectable height difference
More informationFrom ultra-thin lead frames to iron sheets... Double feed detection of various metal sheets
1147 Detector SERIES Related Information General terms and conditions... F-7 General precautions...p.151 PHOTO PHOTO MEASURE ITY From ultra-thin lead frames to iron sheets... Double feed detection of various
More informationSERIES. Ultra-compact Photoelectric Sensor. Long sensing range
EX- SERIES Ultra-compact Photoelectric Amplifier Built-in Miniature-sized and still mountable with M3 screws Conforming to EMC Directive U Recognition (Excluding m cable length type) Miniaturization by
More informationLaser Collimated Beam Sensor
SERIES Laser Collimated Beam Sensor Class 1 Laser Beam Sensor Safe for Your Eyes Marked Conforming to EMC Directive (Excluding LA-C1) Safe Laser Beam This laser collimated beam sensor conforms to the Class
More informationFrom ultra-thin lead frames to iron sheets... Double feed detection of various metal sheets
1135 Detector SERIES Related Information General terms and conditions... F-3 General precautions...p.1595 PHOTO PHOTO MEASURE From ultra-thin lead frames to iron sheets... Double feed detection of various
More informationNPN output PNP output Cord connection Cord length: 2 m Through-beam 7 m Light-ON. 2 m. (selectable by wiring) Diffuse reflective 0.
Built-in Amplifier Photoelectric Sensor E3V3 Easy-to-use, Low-cost Photoelectric Sensor Incorporating s that can be clearly seen from a distance. A series of models with an M8 metal junction connector
More informationSERIES. FX-311 realizes the ultimate in ease-of-operation. Its operation enables easy and full use of latest technology.
FX-11 SERIES FX-11 realizes the ultimate in ease-of-operation. Its operation enables easy and full use of latest technology. Presenting a product which satisfies professionals using volume control. Besides
More informationLong sensing range. 2 m ft. Retroreflective type. 200 mm in. Diffuse reflective type. 160 mm in
PHOTOEECTRIC SENSORS EX- SERIES Ultra-compact Photoelectric PNP output ight intensity type available monitor CX-4 EX-3 Miniature-sized and still mountable with M3 screws EX- EX- Conforming to EMC Directive
More informationpanasonic.net/id/pidsx/global The control category differs depending on the configuration and wiring of the external circuit.
675 Compact Beam Sensor Type 4 SERIES Related Information General terms and conditions... F-3 General precautions... P.1595 PHOTO PHOTO Certified Listing Conforming to OSHA / ANSI MEASURE Category 4 PLe
More informationPRODUCT NEWS. Product Discontinuation Notices. OMRON Corporation Industrial Automation Company
PRODUCT NEWS Product Discontinuation Notices July 4, 2011 Displacement & Measurement Sensors No. 2011187E Discontinuation Notice of Profile Measuring Sensor. Z5[][] series Product Discontinuation Sensor
More informationBGS (at min. setting) BGS (at max. setting)
Compact Photoelectric Sensor with Built-in Amplifier EZ-LS CSM_EZ-LS_DS_E_7_ Distance-settable Sensor Unaffected by Workpiece Color and Background Distance-settable triangulation model unaffected by color.
More informationZX-L-N. A Host of Smart Functions Inside a Compact Body with a Full Range of Laser Types. Smart Sensors (Laser Type) Features
/ Length Authorised Distributors:- ASH & ALAIN INDIA PVT LTD S-, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-(India) Tel : -7977 Fax : -7977 E-mail : sales@ashalain.com (Laser Type) A Host of
More informationFAYb Laser Marker LP-S SERIES. FAYb laser enabling deep engraving and high-speed marking. High speed for enhanced productivity
1231 FAYb Marker SERIES Related Information General terms and conditions... F-3 About laser beam... P.1593~ guide... P.1223~ Korea s KC-mark... P.162 SAFETY USE MEASUREMENT panasonic.net/id/pidsx/global
More informationDC 3-wire Cylindrical Inductive Proximity Sensor. Long sensing range
INDUCTIVE SERIES DC 3-wire Cylindrical Inductive Proximity Oil resistant Metal embedding possible Amplifier Built-in GX G-6 High performance and environmental resistance at low price G-8/8U GA-/GH GX GX-U/FU
More informationGP-X SERIES Conforming to EMC Directive
High Speed High Accuracy Eddy Current Type Digital Displacement Sensor GP-X SERIES Conforming to EMC Directive 25!s &.2%F.S. High-speed sampling and high resolution. The new choice for even more variegated
More informationDIGITAL LASER SENSOR. User friendly, high precision Digital Laser Sensor SERIES mm in. Easy 1 Installation.
LS SERIES DIGITAL LASER SENSOR Multi-voltage User friendly, high precision Digital Laser Sensor Conforming to EMC Directive Conforming to FDA regulations Easy Installation We designed types of sensor heads
More informationBoth Compact and Robust. Safety Light Curtain SF4D SERIES. New Concept. GB Conforming to Compact & Robust panasonic.net/id/pidsx/global
Compact & Robust Type4 PLe SIL3 Safety Light Curtain SF4D SERIES Conforming to OSHA / ANSI Certified GB Conforming to 4584 NRTL certified Certified (Excluding SF4D- -01) New Concept Both Compact and Robust
More informationSlim Body Analog Fiber Sensor. Analog output type for diverse applications. Slim size. Analog voltage output. Various uses. Saturation indicator
13 ASER Slim Body Analog Sensor selection guide...p.11~ / P.1~ Related Information General terms and conditions... P.1 Glossary of terms... P.93 ~ General precautions... P.9 ~ PHOTOEECTRIC PHOTOEECTRIC
More informationPhotoelectric Sensor with Built-in Amplifier with New Connector Options E3Z
Photoelectric Sensor with Built-in Amplifier with New Connector Options E3Z Compact Sensor Offers Long Sensing Distance and Superior Noise-Immunity D Photo-IC provides long sensing distance: 15 m and 10
More informationE3X-NA. Adjuster type standard that is the culmination of true ease and simplicity. Super Manual Fiber Amplifier. Features
Super Manual Fiber Amplifier Adjuster type standard that is the culmination of true ease and simplicity Features Self-explanatory LED bar displays of light levels The previous manual type used the stability
More informationHigh-Accuracy Position Sensors
CP-PC-2265E High-Accuracy Position Sensors K1G Series New High-Performance Laser Sensors. Performance and functions far exceed conventional norms, allowing you to make the measurements you want. A combination
More informationC5 Series Stainless Steel Photoelectric
C5 Series Stainless Steel Photoelectric Part Number Sensing Range M5 (5 mm) stainless steel - DC 14 models available Diffuse and through-beam styles Long operating distances Compact stainless steel housing
More informationNPN output. 200 mm. Type Cable length Model Remarks
Retroreflective Photomicrosensor with Lens CSM DS_E_5_2 Photomicrosensor with light modulation for reduced external light interference. Easy adjustment and optical axis monitoring with a light indicator.
More informationCMOS Laser Sensor with Built-in Amplifier ZX0
New Product CMOS Laser Sensor with Built-in Amplifier ZX0 Stable Detection of Level Differences in the Order of 0.1 mm Dependable detection without being influenced by color, material, or surface conditions.
More informationLight ON 5m. * Light ON. 2.5m (3m) Light ON. (5m)
All voltage photoelectric sensors Built-in amplifier accepts wide supply voltage range. Slim, space-saving construction measures only x x 7.4 mm. s with long life expectancy and high switching capacity
More informationGX-5SU(B) is just 5.4 mm 0.213in in diameter, the smallest in existing DC two-wire sensors. It saves you space.
DC 2-wire Cylindrical Inductive Proximity SERIES Amplifier Built-in High performance & ease of use Robust in tightening The tightening torque has been improved to approx. four times greater than that of
More information