95100, 2/2 (stainless steel) Direct solenoid actuated poppet valves

Transcription

1 9500, / (stainless steel) > > Port size: G/8, G/4, /4 NPT > > Working from 0 bar up > > Assembled free of oil and grease > > Suited for fine vacuum down to, mbar > > For a.c. solenoid systems with integrated rectifier ( Hz) > > These solenoid valves are applicable in Ex protection class ATEX (categories II GD and II 3 GD) and other international approvals Technical features Medium: For aggressive, gaseous and liquid fluids (with contaminated fluids, upstream installation of a dirt trap is recommended.) Operation: Direct solenoid operated poppet valves Operating pressure: bar ( psi) Technical data Switching function: Normally closed Symbol Port size Orifice (mm) Orifice:... 6 mm Port size: G /8, G /4, /4 NPT Mounting position: Optional, preferably with solenoid on top Ambient temperature: NBR: C Depending on solenoid system Operating pressure (bar) min. max. Fluid temperature: FPM: C ( F) Water +95 C (+03 F) EPDM: C ( F) PTFE: C ( F) FFPM: C ( F) Depending on seal materials Air supply must be dry enough to avoid ice formation at temperatures below + C (+35 F). kv factor (m 3 /h) *3) Weight without Solenoid (kg) Materials: Housing: Stainless steel.4404 (36 L) Seals: FPM, other see option selector Inner parts: stainless steel Dimension No. Solenoid group *) Model *) G/ , 0,5 3D 9500 G/ , 0,5 3B 9500 G/ ,34 0, 6D 9540 /4 NPT 4 0 0,34 0, 6D G/ ,34 0, 6C 9540 /4 NPT ,34 0, 6C G/ ,5 0, 6D 9560 /4 NPT ,5 0, 6D G/ ,5 0, 6C 9560 /4 NPT ,5 0, 6C *) When ordering please indicate solenoid, voltage and current type (frequency). *) Technical data and ordering information see following pages. *3) Cv (US) ~ kv x, Option selector 95X X... Orifice Substitute Material seat seal Substitute EPDM FPM PTFE 3 FFPM 4 Frequency (Hz) Substitute At d.c. 00 At a.c. ( Hz) 50 Voltage Substitute 4 V d.c V a.c. 30 Solenoid operators Substitute See table without notice, the specifications given in this document. ( i) 05 Norgren GmbH 04/7 en

2 9500, / (stainless steel) Solenoids group 3B, standard voltages Power consumption 4 V d.c. 30 V a.c. (W) (VA) Rated current 4 V d.c. 30 V a.c. (m A) (m A) class IP/NEMA 8,0 33 IP65 (with 9, 40 IP65 (with 8,0 33 IP65 (with - 9, - 40 IP65 (with Ex- (ATEX-Category) Temperature Ambient/ Media ( C) II 3 G Ex na II T4 II 3 D Ex td A T 0 C II 3 G Ex na II T4 II 3 D Ex td A T 0 C 6, IP66 II G Ex mb IIC T4 Gb II D Ex mb IIIC T0 C Db Electrical connection form A *) form A *) Special connector included form A Special connector included form A Cable length 3 m Drawing Circuit diagram Model No. No ,7-34 IP66 II G Ex mb IIC T4 Gb II D Ex mb IIIC T0 C Db Cable length 3 m ,9-6 - IP66 (with II G Ex eb mb IIC T4/T6 Gb T4: M0 x,5 *) ,3-3 IP66 (with II G Ex eb mb IIC T4/T6 Gb T4: M0 x,5 *) ,9-6 - IP66 (with II G Ex d mb IIC T4/T6 Gb II G Ex e mb IIC T4/T6 Gb T4: / NPT *) ,3-3 IP66 (with II G Ex d mb IIC T4/T6 Gb II G Ex e mb IIC T4/T6 Gb T4: / NPT *) ,9-6 - IP66 (with II G Ex d mb IIC T4/T6 Gb II G Ex e mb IIC T4/T6 Gb T4: M0 x,5 *) ,3 3 IP66 (with II G Ex d mb IIC T4/T6 Gb II G Ex e mb IIC T4/T6 Gb T4: M0 x,5 *) ,5 8 4x Cl. I, Div., Gr. A - D Cl. II/III, Div., Gr. E - G T3C (60 C) 5,9 6 4x Cl. I, Div., Gr. A - D Cl. II/III, Div., Gr. E - G T3C (60 C) Flying leads Flying leads Standard voltages (±0%) 4 V d.c., 30 V a.c., other voltages on request. Design according to VDE 0580, EN 5004/ % duty cycle. *) /cable gland is not scope of delivery, see table»accessories«attention: The protection class for coil series 46xx and 48xx is determined by the choice of cable gland. Example: if an ATEX-certified cable gland is used that has Ex d type of protection, the solenoid will have the protection class Ex d mb; if a cable gland with Ex e type of proteciton is used, the solenoid will have protection class Ex e mb. Approvals ATEX IECEx FM 09x KEMA 0 ATEX 347 X IECEx DEK 3.004X N/en x, 38x EC-Declaration of Conformity N/en x, 38x CSA-LR N/en ATEX IECEx 4xx KEMA 98 ATEX 445 X IECEx KEM X N/en xx PTB 0 ATEX 085 X IECEx PTB.0094X N/en en without notice, the specifications given in this document. ( i) 05 Norgren GmbH 04/7

3 9500, / (stainless steel) Solenoids group 3D, standard voltages Power consumption 4 V d.c. 30 V a.c. (W) (VA) Rated current 4 V d.c. 30 V a.c. (m A) (m A) class IP/NEMA 6,9 703 IP65 (with 9,5 75 IP65 (with,4 475 IP66 (with Ex- (ATEX-Category) Temperature Ambient/ Media ( C) II G Ex eb mb IIC T4/T5 Gb T4: Electrical connection form A *) form A *) Drawing Circuit diagram Model No. No M0 x,5 *) , 66 IP66 (with II G Ex eb mb IIC T4/T5 Gb T4: M0 x,5 *) 6 7,4 475 IP66 (with II G Ex d mb IIC T4/T5 Gb II G Ex e mb IIC T4/T5 Gb T4: / NPT *) , 66 IP66 (with II G Ex d mb IIC T4/T5 Gb II G Ex e mb IIC T4/T5 Gb T4: / NPT *) 7 463,4 475 IP66 (with II G Ex d mb IIC T4/T5 Gb II G Ex e mb IIC T4/T5 Gb T4: M0 x,5 *) , 66 IP66 (with II G Ex d mb IIC T4/T5 Gb II G Ex e mb IIC T4/T5 Gb T4: M0 x,5 *) , x Cl. I, Div., Gr. A - D Cl. II/III, Div., Gr. E - G T3C (60 C) 5,7 68 4x Cl. I, Div., Gr. A - D Cl. II/III, Div., Gr. E - G T3C (60 C) Flying leads Flying leads Standard voltages (±0%) 4 V d.c., 30 V a.c., other voltages on request. Design according to VDE 0580, EN 5004/ % duty cycle. *) /cable gland is not scope of delivery, see table»accessories«attention: The protection class for coil series 46xx and 48xx is determined by the choice of cable gland. Example: if an ATEX-certified cable gland is used that has Ex d type of protection, the solenoid will have the protection class Ex d mb; if a cable gland with Ex e type of proteciton is used, the solenoid will have protection class Ex e mb. Approvals ATEX IECEx FM 3x, 38x EC-Declaration of Conformity N/en x, 38x CSA-LR N/en xx KEMA 98 ATEX 445 X IECEx KEM X N/en xx PTB 0 ATEX 085 X IECEx PTB.0094X N/en /7 without notice, the specifications given in this document. ( i) 05 Norgren GmbH en

4 9500, / (stainless steel) Solenoids group 6C, standard voltages Power consumption 4 V d.c. 30 V a.c. (W) (VA) Rated current 4 V d.c. 30 V a.c. (m A) (m A) class IP/NEMA 6,8 84 IP65 (with 0,6 46 IP65 (with 8,9 369 IP66 (with Ex- (ATEX-Category) Temperature Ambient/ Media ( C) Electrical connection form A *) form A *) II G Ex eb mb IIC T4/T5 Gb T4: T5: Drawing Circuit diagram Model No. No M0 x,5 *) ,0 IP66 (with II G Ex eb mb IIC T4/T5 Gb T4: T5: M0 x,5 *) ,9 369 IP66 (with II G Ex d mb IIC T4/T6 Gb II G Ex e mb IIC T4/T6 Gb T4: T6: / NPT *) ,0 IP66 (with II G Ex d mb IIC T4/T6 Gb II G Ex e mb IIC T4/T6 Gb T4: T6: / NPT *) ,9 369 IP66 (with II G Ex d mb IIC T4/T6 Gb II G Ex e mb IIC T4/T6 Gb T4: T6: M0 x,5 *) ,0 IP66 (with II G Ex d mb IIC T4/T6 Gb II G Ex e mb IIC T4/T6 Gb T4: T6: M0 x,5 *) , x Cl. I, Div., Gr. A - D Cl. II/III, Div., Gr. E - G T3C (60 C) 9,5 4 4x Cl. I, Div., Gr. A - D Cl. II/III, Div., Gr. E - G T3C (60 C) Flying leads Flying leads Standard voltages (±0%) 4 V d.c., 30 V a.c., other voltages on request. Design according to VDE 0580, EN 5004/ % duty cycle. *) /cable gland is not scope of delivery, see table»accessories«attention: The protection class for coil series 46xx and 48xx is determined by the choice of cable gland. Example: if an ATEX-certified cable gland is used that has Ex d type of protection, the solenoid will have the protection class Ex d mb; if a cable gland with Ex e type of proteciton is used, the solenoid will have protection class Ex e mb. Approvals ATEX IECEx FM 37x, 38x CSA-LR N/en xx KEMA 98 ATEX 445 X IECEx KEM X N/en xx PTB 0 ATEX 085 X IECEx PTB.0094X N/en en without notice, the specifications given in this document. ( i) 05 Norgren GmbH 04/7

5 9500, / (stainless steel) Solenoids group 6D, standard voltages Power consumption 4 V d.c. 30 V a.c. (W) (VA) Rated current 4 V d.c. 30 V a.c. (m A) (m A) class IP/NEMA 6,9 703 IP65 (with 7,3 75 IP65 (with 6,9 703 IP65 (with 7,3 75 IP65 (with,4 475 IP66 (with Ex- (ATEX-Category) Temperature Ambient/ Media ( C) II 3 G Ex na II T4 II 3 D Ex tda IP65 T30 C II 3 G Ex na II T4 II 3 D Ex tda IP65 T0 C II G Ex eb mb IIC T4/T5 Gb Electrical connection form A *) form A *) Drawing Circuit diagram Model No. No Special connector included form A Special connector included form A T4: M0 x,5 *) , 66 IP66 (with II G Ex eb mb IIC T4/T5 Gb T4: M0 x,5 *) ,4 475 IP66 (with II G Ex d mb IIC T4/T5 Gb II G Ex e mb IIC T4/T5 Gb T4: / NPT *) , 66 IP66 (with II G Ex d mb IIC T4/T5 Gb II G Ex e mb IIC T4/T5 Gb T4: / NPT *) 7 468,4 475 IP66 (with II G Ex d mb IIC T4/T5 Gb II G Ex e mb IIC T4/T5 Gb T4: M0 x,5 *) , 66 IP66 (with II G Ex d mb IIC T4/T5 Gb II G Ex e mb IIC T4/T5 Gb T4: M0 x,5 *) , x Cl. I, Div., Gr. A - D Cl. II/III, Div., Gr. E - G T3C (60 C) 5,7 68 4x Cl. I, Div., Gr. A - D Cl. II/III, Div., Gr. E - G T3C (60 C) Flying leads Flying leads Standard voltages (±0%) 4 V d.c., 30 V a.c., other voltages on request. Design according to VDE 0580, EN 5004/ % duty cycle. *) /cable gland is not scope of delivery, see table»accessories«attention: The protection class for coil series 46xx and 48xx is determined by the choice of cable gland. Example: if an ATEX-certified cable gland is used that has Ex d type of protection, the solenoid will have the protection class Ex d mb; if a cable gland with Ex e type of proteciton is used, the solenoid will have protection class Ex e mb. Approvals ATEX IECEx FM 37x, 38x CSA-LR N/en xx KEMA 98 ATEX 445 X IECEx KEM X N/en xx PTB 0 ATEX 085 X IECEx PTB.0094X N/en /7 without notice, the specifications given in this document. ( i) 05 Norgren GmbH en

6 9500, / (stainless steel) Partnumbers for international approval Land/Approval Coil/Code 09x 3x/38x 37x/38x 4xx 46xx 48xx Europa/ATEX Standard x x x x x International/IECEx Standard x x x x x China/NEPSI -0 x x Brasilien/INMETRO -0 x x Korea/KOSHA -03 x x x Russland, Kasachstan & Weißrussland/TR-CU 0-04 x x x x Indien/CCOE Standard x x Taiwan/ITRI Standard x x USA/FM Standard x Kanada/CSA Standard x Example: (Coil: 470; Voltage: 4V DC; Approval: TR-CU 0) Accessories Electrical connection Cable gland class Ex e, Ex d (ATEX), Nickel plated brass/ Stainless steel Page 7 Ambient For solenoid Thread Cable Ø (mm) Material class (ATEX) temperatur limitation *) Model 4xx M0 x,5 7,0,0 Plastic II G Ex e / II D Ex t See table xx M0 x,5 0,0 4,0 Plastic II G Ex e / II D Ex t See table xx M0 x,5 6,0,0 Plastic II G Ex e / II D Ex t See table xx M0 x,5 5,0 8,0 Nickel plated brass II G Ex e / II D Ex t xx M0 x,5 0,0 4,0 Nickel plated brass II G Ex d / II D Ex t xx / NPT 7,5,9 Nickel plated brass II G Ex d / II D Ex t xx, 48xx M0 x,5 9,0 3,0 Stainless steel.457 II G Ex e / II D Ex t xx, 48xx M0 x,5 7,0,0 Stainless steel.4404 II G Ex d / II D Ex t xx, 48xx M0 x,5 0,0 4,0 Stainless steel.4404 II G Ex d / II D Ex t *) The limitation of the temperature range to the mentioned range is due to the self-heating of the solenoid. For Ambient temperatur limitation solenoid 4xx solenoid & *) x/46x T4 & Dust Ex: -35 C + 80 C T4 & Dust Ex: -40 C + 65 C T6: -35 C + 55 C T6: -40 C + 55 C 4x/47x T4 & Dust Ex: -35 C +65 C T4 & Dust Ex: -40 C + 6 C T5: -35 C + 55 C T5: -40 C + 55 C x/48x T4 & Dust Ex: -35 C +50 C T4 & Dust Ex: -40 C +50 C T5: -35 C +40 C T5: -40 C +40 C *) Tested for the lower level of mechanical risk (4 joule), an additional protection against impacts might be needed (Form A) Dimensions Valves Dimensions in mm Projection/First angle , ,5 ~ 8, Ports G/8 or /8 NPT M4 x 6 mm deep 3 Ports G/4 or /4 NPT en without notice, the specifications given in this document. ( i) 05 Norgren GmbH 04/7

7 9500, / (stainless steel) Drawings - Solenoid Weight: 0,5 kg Weight: 0,6 kg Dimensions in mm Projection/First angle , , , , M6 x, Weight: 0,5 kg , , M6 x,5 8 4,5 5,5 M6 x,5 9,5 8 7 M6 x,5 9, Weight: 0,7 kg Weight: 0,3 kg 7 Weight: 0,4 kg 64, ,5 9,5 73 can be indexed by 4x90 Ø 6 or 3 (with spacer tube) 04/7 without notice, the specifications given in this document. ( i) 05 Norgren GmbH en

8 9500, / (stainless steel) 7 Weight: 0,8 kg 70,5 8 Weight: 0,5 kg Dimensions in mm Projection/First angle / NPT ,5 4, , Ø 6 or 3 (with spacer tube) 3 M0 x,5 or / NPT 4 Flying leads AWG 8 (460 mm long) Circuit diagrams T T Cable gland A B C ø D Model M0 x, ,0..., C B D C B D M0 x,5 0 0,0... 4, M0 x, ,0..., M0 x, ,0... 8, M0 x, ,0... 4, A A / NPT ,5..., M0 x,5 6,5 7,5 9,0... 3, only M0 x, ,0..., M0 x, ,0... 4, Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features/data«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI Precision Engineering, Norgren GmbH. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. en without notice, the specifications given in this document. ( i) 05 Norgren GmbH 04/7