98015 series, 3/2 Direct solenoid actuated poppet valve

Transcription

1 90 series, / > Port size: / & / (ISO G/NPT), NAMUR Interface > Main application: Single acting actuators > TÜV-approval based on type eamination DGRL 9//EG and IE 0, multichannel up to SIL > Optional add-on manual override or inductive limit switches on request > Suited for outdoor use under critical environment conditions > Variable valve solenoid combination Technical features Medium: Filtered, non-lubricated and dried compressed air, instrument air, nitrogen and other non-flammable neutral, dry fluids Operation: Direct solenoid operated poppet valve Operating pressure: bar (0... psi) Orifice: mm Port size: G/, / NPT, G/, / NPT NAMUR Interface with integrated recirculation from the ehaust air to the acutator sping chamber direction: Optional Mounting position: Any, but preferably with solenoid vertical Ambient/Media temperature: ( F) ( F) (SIL version) Depending on solenoid system Air supply must be dry enough to avoid ice formation at temperatures below + ( F). For outdoor installations must be protected all connections against the penetration of moisture and a solenoid with IP protection must be used! Materials: ody: Aluminium anodized (suitable for high humidity, sulphuric, sodium chloride or ammonia environments), brass.00 (Ms ), stainless steel.0 ( L) Seals: NR conversion: v US Gallon/min (water) = l/min (air) 0,00 Kv m³/h (water) = l/min (air) 0,00090 Technical data Housing: Aluminium anodized, Seals: NR ( F) / IE 0: ( F) Symbol Port size, G/, G/ / NPT, / NPT () NAMUR G/ NAMUR / NPT (l/min) *)»» (l/min) *)»» Operating pressure (bar) (psi) Test certificate IE 0 Weight (kg) 0, (lbs). Drawing *) , Housing: Stainless steel, Seals: NR ( F) / IE 0: ( F) Symbol Port size, G/ (l/min) *)»» Operating pressure (bar) (psi) Test certificate IE 0 Weight (kg) (lbs).9 Drawing *) 90 / NPT / NPT G/ G/ / NPT / NPT Housing: rass, Seals: NR ( F) / IE 0: ( F) Symbol Port size, G/ / NPT () G/ (l/min) *)»» () G/ / NPT (l/min) *)»» (l/min) *)»» Operating pressure (bar) (psi) Test certificate IE 0 Weight (kg) (lbs).9 Drawing *) *) When ordering please indicate solenoid, voltage and current e (frequency). 0 0 *) Inlet pressure bar ( psi), outlet pressure bar ( psi) *) Inlet pressure 0 bar ( psi), outlet pressure 0 bar (0 psi) 0 0 without notice, the specifications given in this document. (00 - d) 0 Norgren GmbH 0/ en..9.0

2 90 series, / Option selector Materials Substitute Aluminium rass Stainless steel Port size Substitute NAMUR G/ 0 NAMUR / NPT G/ / NPT G/ / NPT 90 Voltage Substitute V d.c V a.c. 00 Solenoid actuators Substitute See table en..9.0 without notice, the specifications given in this document. (00 - d) 0 Norgren GmbH 0/

3 90 series, / Solenoids Power Rated current Protection E-Protection consumption class (ATEX-ategory) V d.c. 0 V a.c. V d.c. 0 V a.c. IP/NEMA (W) (VA) (m A) (m A) Temperature Electrical Ambient/ connection Media ( ),9 0 IP (with connector) 000, IP (with connector) 0 9 IP onnector Media: +0 ma DIN EN 0-0, Form A *) onnector Media: +0 ma DIN EN 0-0, Form A *) Terminals, cable 9 Media: +0 gland Pg, 0 0 IP Media: +0 Terminals, cable 9 gland Pg, 9 IP Media: +0 m cable, encapsulated in EP resin 9 0 IP Media: +0 m cable, encapsulated in EP resin 9 9 II G E eb mb II T/T Gb T: T: M0, *) 0 II G E eb mb II T/T Gb M0, *) II D E tb III T0 Db T: T: ,0 II D E tb III T0 Db Drawing ircuit diagram 9 II G E d mb II T/T Gb II G E e mb II T/T Gb II D E tb III T0 Db T: T: / NPT *) 0 0 0,0 II G E d mb II T/T Gb II G E e mb II T/T Gb II D E tb III T0 Db T: T: / NPT *) 9 II G E d mb II T/T Gb II G E e mb II T/T Gb II D E tb III T0 Db T: T: M0, *) 0 0,0 II G E d mb II T/T Gb II G E e mb II T/T Gb II D E tb III T0 Db T: T: M0, *) 9 II G E mb d II T/T II G E mb e II T/T T: T: M0, *) 0 0 II G E mb d II T/T II G E mb e II T/T T: T: M0, *) 0 voltages (±0%) V d.c., 0 V a.c., other voltages on request. Design according to VDE 00, EN 00/00. 00% duty cycle. *) onnector/cable gland is not scope of delivery, see table»accessories«attention: The protection class for coil series and is determined by the choice of cable gland. Eample: if an ATEX-certified cable gland is used that has E d type of protection, the solenoid will have the protection class E d mb; if a cable gland with E e type of proteciton is used, the solenoid will have protection class E e mb. Approvals Approvals ATEX IEE KEMA 9 ATEX X IEE KEM 09.00X N/en..0 PT 0 ATEX 0 X IEE PT.009X N/en.. PT 0 ATEX 0 X IEE PT 0.009X N/en..90 0/ Datasheet without notice, the specifications given in this document. (00 - d) 0 Norgren GmbH en..9.0

4 90 series, / Solenoids Power Rated current Protection E-Protection consumption class (ATEX-ategory) V d.c. 0 V a.c. V d.c. 0 V a.c. IP/NEMA (W) (VA) (m A) (m A) Temperature Electrical Ambient/ connection Media ( ) Drawing ircuit diagram 9 l. I, Div., Gr. A - D l. II/III, Div., Gr. E - G T (0 ) Flying leads length 0 mm 9, l. I, Div., Gr. A - D l. II/III, Div., Gr. E - G T (0 ) Flying leads length 0 mm, l. I, Div., Gr. A - D l. II/III, Div., Gr. E - G T (0 ) Flying leads length 0 mm, l. I, Div., Gr. A - D l. II/III, Div., Gr. E - G T (0 ) Flying leads length 0 mm voltages (±0%) V d.c., 0 V a.c., other voltages on request. Design according to VDE 00, EN 00/00. 00% duty cycle. Approvals Approvals FM, SA-LR - Datasheet N/en.. Partnumbers for international approval Land/Approval oil/ode Europa/ATEX International/IEE hina/nepsi -0 rasilien/inmetro -0 Korea/KOSHA -0 Russland, Kasachstan & Weißrussland/TR-U 0-0 Indien/OE Taiwan/ITRI USA/FM Kanada/SA Eample: (oil: 0; Voltage: V D; Approval: TR-U 0) en..9.0 without notice, the specifications given in this document. (00 - d) 0 Norgren GmbH 0/

5 90 series, / Accessories Electrical connection able gland Protection class E e, E d (ATEX), Nickel plated brass/ Stainless steel Page 0 Ambient temperatur limitation *) For solenoid Thread able Ø (mm) Material Protection class (ATEX) M0,,0,0 Plastic II G E e / II D E t See table 09 M0, 0,0,0 Plastic II G E e / II D E t See table 09 M0,,0,0 Plastic II G E e / II D E t See table 09 M0,,0,0 Nickel plated brass II G E e / II D E t - 09 M0, 0,0,0 Nickel plated brass II G E d / II D E t - 0 / NPT,,9 Nickel plated brass II G E d / II D E t - 09, M0, 9,0,0 Stainless steel. II G E e / II D E t - 09, M0,,0,0 Stainless steel.0 II G E d / II D E t - 099, M0, 0,0,0 Stainless steel.0 II G E d / II D E t - 09 *) The limitation of the temperature range to the mentioned range is due to the self-heating of the solenoid. For Ambient temperatur limitation solenoid solenoid 09 & 09 *) 09 / T & Dust E: - + T & Dust E: -0 + T: - + T: -0 + *) Tested for the lower level of mechanical risk ( joule), an additional protection against impacts might be needed. Accessories onnector DIN EN 0-0 Silencer *) Ehaust guard *) Add-on manual override *) Page Page Page 00, form A M/S (G/) 0 (G/, / NPT) 0000 (without detent) /S (/ NPT) 0 (G/, / NPT) 00 (with detent) M/S (G/) /S (/ NPT) *) For indoors use only *) For outdoors use, opening pressure ~ 0, bar *) Using the manual override with detent cancels the SIL-Approval! NAMUR accessories Throttle control plate *) Flange plate Yoke Distance plate for pressure switches Mounting plate Quick ehaust module *) Page Page & Page (NAMUR single connection plate) (90 ) (NAMUR-rip use in combination with 090) 0 (0 ) 0 (0 ) *) The throttle control plate 009 has a minimum flow rate for safety reason. *) Technical details see catalogue page en..0. Page Page 0/ without notice, the specifications given in this document. (00 - d) 0 Norgren GmbH en..9.0

6 90 series, / Drawings Valves Dimensions in mm Projection/First angle (.) G/ G/ ~ 9, G/ Solenoid optional turnable, for dimensions see page Ports, and : G/, / NPT, G/ or / NPT Add on manual override, see below Add-on manual override Without detent : 0000 With detent : 00,. 0, 0 9,, ~ 9, 0 9, 0, 9, 9 9, 9 ø en..9.0 without notice, the specifications given in this document. (00 - d) 0 Norgren GmbH 0/

7 90 series, / Solenoids Weight: 0, kg Weight: 0, kg Dimensions in mm Projection/First angle, 9,, 9, 9 0, M, 0, 0,, 0,, 0 0, 9 9 / NPT 0,, 0, M, Weight: 0, kg Weight: 0, kg Weight: 0, kg 9 Weight: 0, kg, 0, 0 onnector can be indeed by 90 Ø or (with spacer tube) M0, or / NPT Flying leads AWG (0 mm long) With cable gland, Pg, 0/ without notice, the specifications given in this document. (00 - d) 0 Norgren GmbH en..9.0

8 90 series, / 0 Weight:, kg Dimensions in mm Projection/First angle + Ø or (with spacer tube) ircuit diagrams 0 T T able gland A ø D M0, 0 0,0...,0 09 A D 09 only A D M0, 0 0,0...,0 09 M0, 0 0,0...,0 09 M0, 9,0...,0 09 M0, 9 0,0...,0 0 / NPT,...,9 09 M0,,, 9,0...,0 09 M0, 9,0...,0 099 M0, 0 0,0...,0 09 en..9.0 without notice, the specifications given in this document. (00 - d) 0 Norgren GmbH 0/

9 90 series, / Accessories Silencer Dimensions in mm Projection/First angle Ehaust guard : M/S, M/S, /S & /S : 0 & 0 ød G ød G G ØD Weight (g) Suitable for G ØD Weight (g) G/,,,9 M/S / G/, / NPT 0, 0 / NPT,,,9 /S / G/, / NPT, 9 0 G/, M/S / NPT, /S NAMUR hole pattern (actuator side) NAMUR quick ehaust module for a better kv-value by ehaust see data sheet..0 NAMUR interlinking plates in redundancy design for»safety ehausting«and»safety ventilating«see data sheet..0 () oding stud threaded 0 mm deep Single connection plate : 090,,, 9 G/ 0 () () 0 9 9, 0 9 ø 9, 0 () ø9 9 G/ 9 ø, ø, 0/ without notice, the specifications given in this document. (00 - d) 0 Norgren GmbH en..9.09

10 90 series, / NAMUR slot : 09 Yoke : 009 Throttle control plate : 009 Dimensions in mm Projection/First angle 9,, 0 0 9,,, 0,,, A A Distance plate for pressure switches : 0009 Mounting plate : 0 (90 ) 9 : 0 (0 ) : 0 (0 ) Warning 0 These products are intended for use in industrial compressed air and fluid systems only. Do not use these products where pressures and temperatures can eceed those listed under»technical features/data«. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult IMI Precision Engineering, Norgren GmbH. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the 0, event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. Functional safety (SIL): Suitable for certain applications can only be evaluated through eamination of each safety-related overall system with regard to the requirements of IE 0/., en Diese..9.0 Produkte sind ausschließlich in Druckluft- und Fluidsystemen zu sichtigen und ausreichende Sicherheitsvorkehrungen zu treffen, um without notice, the specifications given in this document. (00 - d) 0 Norgren GmbH 0/ verwenden. Sie sind dort einzusetzen, wo die unter»technische Merkmale/-Daten«aufgeführten Werte nicht überschritten werden. Falle einer solchen Störung zu Verletzungen von Personen sowie eschädigungen der Geräte im verhindern.