VisiFlo Hollow Cone Spray Tips

Transcription

1 VisiFlo Hollow Cone Spray Tips Use for directed applica tions in air blast spraying for orchards and vineyards and other specialty crops. Also well-suited for applications of insecticides, fungicides, defoilants and foliar fertilizers at pressures of 0 PSI ( ) and above. n VisiFlo color-coded version consists of stainless steel or ceramic orifice in polypropylene body. Maximum operating pressure 00 PSI ( ). Spray angle is 0 at 0 PSI ( ). n Finely atomized spray pattern provides thorough coverage. n TX-VS and TX-VS available in VisiFlo color-coded stainless steel only. TX-VS Stainless Steel with VisiFlo TX- Brass TX-SS Stainless Steel TX-VK Ceramic with VisiFlo TX-VS 0 TX-VS 0 TX-VK 0 TX-VK 0 TX-VK 0 TX-VK 0 TX-VK 0 TX-VK 0 TX-VK 0 TX-VK V V F F VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF F F VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF F F F VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF F F F VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF F F F F F VF VF VF VF VF VF VF VF VF VF VF VF VF VF F F F F F F VF VF VF VF VF VF VF VF VF VF VF VF VF Note: Always double check your application rates. Tabulations are based on spraying water at 0 F ( C). See pages for useful formulas and other information. 0

2 VisiFlo Hollow Cone Spray Tips Use for directed applica tions in air blast spraying for orchards and vineyards and other specialty crops. Also well-suited for applications of insecticides, fungicides, defoilants and foliar fertilizers at pressures of 0 PSI ( ) and above. n Maximum operating pressure 00 PSI ( ). Spray angle is 0 at 0 PSI ( ). n Finely atomized spray pattern provides thorough coverage. n Longer wear life. n Resists corrosion. n Accepts more abrasive pesticide formulation. n Polypropylene body for use with corrosive materials and ceramic insert. n Popular nozzle sizes fit most sprayers. n Incorporates ISO scheme. TXA ConeJet. mm (/() TXB ConeJet. mm (/().0 mm (/() mm (/(). mm (/(). mm (/() mm (/() mm (/() Example: TXA00VK Ceramic with VisiFlo TXA0000VK TXB0000VK (0) TXA000VK TXB000VK (0) TXA00VK TXB00VK (0) TXA00VK TXB00VK (0) TXA00VK TXB00VK (0) TXA00VK TXB00VK (0) TXA00VK TXB00VK (0) F F VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF F F F F VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF F F F VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF F F F F F VF VF VF VF VF VF VF VF VF VF VF VF VF VF F F F F F VF VF VF VF VF VF VF VF VF VF VF VF VF VF Note: Always double check your application rates. Tabulations are based on spraying water at 0 F ( C). See pages for useful formulas and other information.

3 Hollow Cone Spray Tips Use for directed applications in air blast spraying for orchards and vineyards and other specialty crops. Also well-suited for applications of insecticides, fungicides, defoliants and foliar fertilizers at pressures of 0 PSI ( ) and above. n Produces uniform, 0 hollow cone spray pattern ideal for airblast, directed and specialty applications. n Flow rates are matched to serve as a direct replacement for commonly used non-teejet hollow cone spray tips. n High-quality ceramic orifice provides superior wear life, including high-pressure operation. n Low profile acetal tip body provides minimal impact with foliage and excellent chemical resistance. n Color-coded holder based on tip flow rate allows for easy capacity identification. n Snap-fit backup plate provides positive retention when handled in field, but allows for tool-free removal for easy cleaning. n Best suited for use with TeeJet 0 series brass rollover fittings. n Compatible with TeeJet cap CP0 for use on rollovers and threaded nozzle bodies, tighten to a maximum torque of: 0 in-lbs ( N-m). n Suggested spray pressure range of 0 0 PSI ( ). n Uses --NYR Quick TeeJet cap, gasket and O-ring. Reference page for more information. TXR00VK Ceramic with TXR00VK-0X Ceramic with, 0 Tip Pack O-Ring Quick TeeJet Cap TXR00 -VK Spray Tip (Cross Section View) TXR ConeJet Tip Assembly Seat Washer TXR000VK 0 TXR000VK 0 TXR00VK 0 TXR00VK 0 TXR00VK 0 TXR00VK 0 TXR00VK 0 TXR00VK 0 TXR00VK 0 TXR00VK 0 TXR00VK V VF VF VF VF F VF F VF F F F F VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF F F F F F F F F F F F VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF F F F F F VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF F F F F F VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF TXR00VK 0 F F F F F F F F F F F VF VF VF VF VF VF VF VF VF VF Note: Always double check your application rates. Tabulations are based on spraying water at 0 F ( C). See pages for drop size classification, useful formulas and other information.

4 Air Induction Hollow Cone Spray Tips Hollow cone spray pattern is ideal for air blast and directed spray applications. n Constructed of polypropylene, ceramic and Viton for excellent chemical and wear resistance. n Removable pre-orifice for fast and easy cleaning. n Available in VisiFlo ceramic (VK). n Larger droplets are produced, as compared to standard TX ConeJet, through the use of a venturi air aspirator resulting in reduced drift and improved canopy penetration. n Ideal for sprayers equipped with automatic control systems. n AITXA to be used with CP0-*-NY Quick TeeJet cap. n AITXB to be used with Albuz caps or equivalent. n Suggested spray pressure of 0 00 PSI ( ). AITXA ConeJet. mm (/) AITXB ConeJet. mm (/). mm (/) mm (/). mm (/) mm (/) mm (/) mm (/) Example: AITXA00VK Ceramic with VisiFlo AITX 00VK 0 AITX 00VK 0 AITX 00VK 0 AITX 00VK 0 ATIX 00VK 0 AITX 00VK XC XC VC VC C C C C C C C C M M M M M XC XC VC VC VC C C C C C C C C C M M M XC XC XC XC XC VC VC VC VC VC C C C C C C C UC UC XC XC XC XC XC XC XC XC VC VC VC VC VC VC C UC UC XC XC XC XC XC XC VC VC VC VC VC VC C C C UC UC UC XC XC XC XC XC XC XC VC VC VC VC VC VC VC Specify A or B. Note: Always double check your application rates. Tabulations are based on spraying water at 0 F ( C). See pages for drop size classification, useful formulas and other information.

5 VisiFlo Hollow Cone Spray Tips Typical Assembly -NY Slotted Strainer* Core * Use CP-NY gasket when -NY Nylon slotted strainer is not used. Disc CP0 TeeJet Cap 0 Double Outlet Rollover For a complete listing of rollover options, please see page 0. VisiFlo Flat Spray Tips Excellent: Use for directed applica tions in air blast spraying for orchards and vineyards and other specialty crops. Also well-suited for applications of insecticides, fungicides, defoilants and foliar fertilizers at pressures of 0 PSI ( ) and above. n Tapered-edge flat spray pattern for uniform coverage. n VisiFlo color-coded version available with ceramic orifice. n Maximum pressure rating of 00 PSI ( ). TP00VK TP00VK TP00VK XR00VK XR00VK XR00VK XR00VK XR00VK Note: Always double check your application rates. Tabulations are based on spraying water at 0 F ( C). See pages for useful formulas and other information.

6 Disc-Core Type Hollow Cone Spray Tips Typical Assembly with Ceramic Disc and Core TeeJet -NY Core Disc CP0 Nozzle Body Slotted Strainer* TeeJet Cap *Use CP-NY gasket when -NY Nylon slotted strainer is not used. Hollow Cone Type Spray Tips Hollow Cone Spray Pattern Produced by Cores #,,, & D DC D. DC D DC D DC D DC D DC D. DC D DC D DC D DC D DC D DC D DC D. DC D DC D DC D DC D DC D DC D DC D DC D DC D DC D DC D DC D. DC D DC D DC D DC D DC D DC D DC D DC D DC D DC D DC D DC D DC D. DC D DC D DC D DC D DC D DC D DC D DC D DC mm Note: Always double check your application rates. Tabulations are based on spraying water at 0 F ( C). See pages for useful formulas and other information. CP--NY Quick TeeJet Cap For ceramic disc and core. See page for ordering information. To order orifice disc only, specify disc number and material. Note: For proper assembly and performance, disc and core must both be of like materials. DCER- Ceramic D Hardened Stainless Steel DE- Stainless Steel DVP- Polymer To order core only, specify core number and material. DC-CER Ceramic DC-HSS Hardened Stainless Steel DC Brass DC-NY Nylon STRAINER NOTE: For nozzles using orifice disc numbers,. and, or core numbers and, slotted strainer number - equivalent to mesh screen size is required. For all other larger capacity discs and cores, slotted strainer number - equivalent to mesh screen size is required.

7 Disc-Core Type Full Cone Spray Tips For spraying pesticides at higher pressures and flow rates. Especially suitable for wettable powders and other abrasive chemicals. Larger capacity nozzles are also used in air blast sprayers. Orifice Discs Available in a variety of sizes and materials. Ceramic for increased wear life, hardened stainless steel, stainless steel and polymer. n Produce smaller droplets for thorough coverage with contact pesticides and foliar applications. n Maximum spray pressure to 00 PSI ( ). Ceramic Sizes Available: DCER- through DCER-, DCER-. Full Cone Spray Pattern Produced by Cores #,, & Ceramic Hardened Stainless Steel Stainless Steel Polymer Cores Standard cores are made of brass. Also available in ceramic, hardened stainless steel and Nylon. All cores with the exception of ceramic are made with rear nibs. Make sure core is always placed with the nib facing the nozzle body. Ceramic Sizes Available: DC-CER, DC-CER, DC-CER, DC-CER, DC-CER, DC-CER, DC-CER, DC-CER, DC-CER. Ceramic D DC D. DC D DC D DC D DC D. DC D DC D DC D DC D DC D. DC D DC D DC D DC D DC D DC D DC D DC D DC D DC D DC D DC D DC Hardened Stainless Steel Full Cone Type Spray Tips mm 0. Brass Nylon CP Note: Always double check your application rates. Tabulations are based on spraying water at 0 F ( C). See pages for useful formulas and other information. Seal Core To order orifice disc only, specify disc number and material. Note: For proper assembly and performance, disc and core must both be of like materials. DCER- Ceramic D Hardened Stainless Steel DE- Stainless Steel DVP- Polymer To order core only, specify core number and material. DC-CER Ceramic DC-HSS Hardened Stainless Steel DC Brass DC-NY Nylon CP-EPR Seal Gasket STRAINER NOTE: For nozzles using orifice disc numbers,. and ; or core numbers and, slotted strainer number - equivalent to mesh screen size is required. For all other larger capacity discs and cores, slotted strainer number - equivalent to mesh screen size is required.