4" MULTISTAGE CENTRIFUGAL SUBMERSED PUMPS COMPLETE WITH MOTOR
|
|
|
- Barry Richards
- 5 years ago
- Views:
Transcription
1 NOCCHI SCM 4 PLUS Maximum rigidity and resistance to water hammer, Strong resistance to the abrasive action of sand, Excellent hydraulic efficiency SCM 4 PLUS submersible pumps consist of a multi-stage pumping unit directly coupled to a submersed motor. Particularly suitable for lifting from deep wells with ø 4 ( mm). APPLICATIONS Lifting of water from boreholes. Automatic systems for garden irrigation. Irrigation for agricultural use. Aqueducts for drinking water. Lifting and supply of tanks and pressurization autoclaves, for civil and industrial systems. Submersed 4" motor. Special resin impregnated sealed stator. Thrust bearings and bushings cooled with water. Extractable cable about 1.75 m in length. Cooling in non-polluting water. Flange NEMA 4 Degree of protection IP 68 sulation class B. Speed of rotation 285 rpm. Special mechanical gasket with sandproof protection. USAGE DATA Type of liquid: clean, non-aggressive, non-explosive, free of solid particles. Maximum temperature of the liquid 35 C. Max. start-ups per hour:. protection with thermal relay provided by the user. TABLE OF MATERIALS Component Material 1 1 Outlet Stainless steel X5 CrNi18 (AISI 4) casting 2 take flange Stainless steel X5 CrNi18 (AISI 4) casting 3 Pump body Stainless steel X5 CrNi 18 (AISI 4) 4 Non-return valve Stainless steel X5 CrNi 18 (AISI 4) 5 Cable protection conduit Stainless steel X5 CrNi 18 (Aisi 4) 6 Filter Stainless steel X5 CrNi 18 (Aisi 4) 7 Impellers Acetal resin 8 Diffuser Polycarbonate with ceramic insert at point of wear 9 Diffuser cap Polycarbonate with ceramic insert at point of wear shaft Hexagonal in stainless steel X CrNiS9 (AISI 3) with ceramic insert at point of wear 11 Self-lubricating supply bearing Polyamide molybdenum disulfide - Thrust ring in each stage
2 NOCCHI SCM 4 PLUS Outlet made of stainless steel AISI 4 casting with a double inner conical profile with a stainless steel non-return valve and a double slot for a safety cable. ADVANTAGES: It eliminates the load losses offering maximum rigidity and great resistance to water hammers, thus protecting the pump. Floating impeller with stainless steel inlet moulded with a diffuser cover. Thrust bearing inserted between the hub of the impeller and the diffuser consisting of 1 ceramic ring moulded with the diffuser and a free graphite ring. "ternational Patent" ADVANTAGES: This extraordinary technological innovation determines a great increase of the yield as well as high resistance to the abrasive action of sand and to dry running. Shaft guide bearing made with a selflubricating closed bushing in polyamide molybdenum disulfide and shaft in stainless steel with ceramic insert at the point of wear. ADVANTAGES: It increases the life of the pump - protection against dry running - great resistance to sand. support and inlet made of stainless steel AISI 4 casting rigidly welded to the external sleeve made of stainless steel. Stainless steel intake grille ADVANTAGES: It eliminates the load losses offering maximum rigidity and great resistance to water hammers, thus protecting the pump. 181
3 NOCCHI SCM 4 PLUS TABLE TO CALCULATE THE LENGTH OF THE PUMPS A Total length mm B C Total length Total length mm mm L Package length mm Total weight (kg) SCM 4 PLUS /57 M SCM 4 PLUS /57 T SCM 4 PLUS /9 M SCM 4 PLUS /9 T SCM 4 PLUS /1 M SCM 4 PLUS /1 T SCM 4 PLUS /185 M SCM 4 PLUS /185 T SCM 4 PLUS /2 M SCM 4 PLUS /2 T SCM 4 PLUS 55/5 M SCM 4 PLUS 55/5 T SCM 4 PLUS 55/8 M SCM 4 PLUS 55/8 T SCM 4 PLUS 55/5 M SCM 4 PLUS 55/5 T SCM 4 PLUS 55/1 M SCM 4 PLUS 55/1 T SCM 4 PLUS 55/ M SCM 4 PLUS 55/ T SCM 4 PLUS 55/ T SCM 4 PLUS 75/ M SCM 4 PLUS 75/ T SCM 4 PLUS 75/56 M SCM 4 PLUS 75/56 T SCM 4 PLUS 75/75 M SCM 4 PLUS 75/75 T SCM 4 PLUS 75/1 M SCM 4 PLUS 75/1 T SCM 4 PLUS 75/1 M SCM 4 PLUS 75/1 T SCM 4 PLUS 75/2 T "1/ SCM 4 PLUS 115/ M SCM 4 PLUS 115/ T SCM 4 PLUS 115/5 M SCM 4 PLUS 115/5 T SCM 4 PLUS 115/65 M SCM 4 PLUS 115/65 T SCM 4 PLUS 115/95 M SCM 4 PLUS 115/95 T SCM 4 PLUS 115/122 M SCM 4 PLUS 115/122 T SCM 4 PLUS 115/185 T SCM 4 PLUS 115/245 T SCM 4 PLUS 15/42 M SCM 4 PLUS 15/42 T SCM 4 PLUS 15/64 M SCM 4 PLUS 15/64 T SCM 4 PLUS 15/84 M SCM 4 PLUS 15/84 T SCM 4 PLUS 15/1 T SCM 4 PLUS 15/17 T SCM 4 PLUS 15/ T SCM 4 PLUS 15/ T "
4 NOCCHI SCM 4 PLUS /2 /185 /1 /9 / MEI.4 - Reference MEI.7 - The information on the reference efficiency is available at the address: [%] H[ft] Q[l/min] l/min μf Q HP kw m 3 /h SCM 4 PLUS-/57 M SCM 4 PLUS-/57 T SCM 4 PLUS-/9 M SCM 4 PLUS-/9 T SCM 4 PLUS-/1 M SCM 4 PLUS-/1 T SCM 4 PLUS-/185 M SCM 4 PLUS-/185 T SCM 4 PLUS-/2 M SCM 4 PLUS-/2 T ~ 2 3 ~ 1 ~ 2 3 ~ 1 ~ 2 3 ~ 1 ~ 2 3 ~ 1 ~ 2 3 ~ /4 183
5 NOCCHI SCM 4 PLUS / 55/ 55/1 55/5 55/8 55/ MEI.4 - Reference MEI.7 - The information on the reference efficiency is available at the address: P η η [%] H[ft] Q[l/min] l/min 5 µf. Q HP kw m 3 /h SCM 4 PLUS-55/5 M 1 ~ SCM 4 PLUS-55/5 T 3 ~ SCM 4 PLUS-55/8 M 1 ~ SCM 4 PLUS-55/8 T 3 ~ SCM 4 PLUS-55/5 M 1 ~ SCM 4 PLUS-55/5 T 3 ~ SCM 4 PLUS-55/1 M 1 ~ SCM 4 PLUS-55/1 T 3 ~ SCM 4 PLUS-55/ M 1 ~ SCM 4 PLUS-55/ T 3 ~ SCM 4 PLUS-55/ T ~ /4 184
6 NOCCHI SCM 4 PLUS /2 75/1 75/1 75/75 75/56 75/ Q[l/min] P 45 η η [%] H[ft] MEI.4 - Reference MEI.7 - The information on the reference efficiency is available at the address: l/min 5 µf. Q HP kw m 3 /h SCM 4 PLUS-75/ M SCM 4 PLUS-75/ T SCM 4 PLUS-75/56 M SCM 4 PLUS-75/56 T SCM 4 PLUS-75/75 M SCM 4 PLUS-75/75 T SCM 4 PLUS-75/75 T SCM 4 PLUS-75/1 M SCM 4 PLUS-75/1 T SCM 4 PLUS-75/1 M SCM 4 PLUS-75/1 T SCM 4 PLUS-75/2 T /4 185
7 NOCCHI SCM 4 PLUS / / / /95 115/65 115/5 115/ P η η [%] H[ft] Q[l/min] MEI.4 - Reference MEI.7 - The information on the reference efficiency is available at the address: l/min µf. Q HP kw m 3 /h SCM 4 PLUS-115/ M 1 ~ SCM 4 PLUS-115/ T 3 ~ SCM 4 PLUS-115/5 M 1 ~ SCM 4 PLUS-115/5 T 3 ~ SCM 4 PLUS-115/65 M 1 ~ SCM 4 PLUS-115/65 T ~ SCM 4 PLUS-115/65 T 3 ~ SCM 4 PLUS-115/95 M 1 ~ SCM 4 PLUS-115/95 T ~ SCM 4 PLUS-115/95 T 3 ~ SCM 4 PLUS-115/122 M 1 ~ SCM 4 PLUS-115/122 T 3 ~ SCM 4 PLUS-115/185 T ~ SCM 4 PLUS-115/245 T ~ /4 186
8 NOCCHI SCM 4 PLUS / 15/ 15/17 15/1 15/84 15/64 15/ P η η [%] H[ft] Q[l/min] MEI.4 - Reference MEI.7 - The information on the reference efficiency is available at the address: SCM 4 PLUS-15/42 M SCM 4 PLUS-15/42 T SCM 4 PLUS-15/42 T SCM 4 PLUS-15/64 M SCM 4 PLUS-15/64 T SCM 4 PLUS-15/64 T SCM 4 PLUS-15/84 M SCM 4 PLUS-15/84 T SCM 4 PLUS-1 5/84 T l/min µf. Q HP kw m 3 /h ~ 2 3 ~ 3 ~ 2 1 ~ 2 3 ~ 3 ~ 2 1 ~ 2 3 ~ 3~ , SCM 4 PLUS-15/1 T ~ SCM 4 PLUS-15/17 T ~ SCM 4 PLUS-15/ T ~ SCM 4 PLUS-15/ T ~
2CP. Centrifugal twin-impeller pumps
CP Centrifugal twin-impeller pumps Clean water Domestic use Civil use Industrial use PERFORMANCE RANGE Flow rate up to l/min (7 m³/h) Head up to m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid
Stainless Steel Submersible Pumps DATA BOOKLET. ISO 9001 Company. 60 Hz. Pumping Solution
Stainless Steel Submersible Pumps DATA BOOKET ISO Company Pumping Solution Hz Photographs of a few Manufacturing Units Contents Stainless steel submersible bore well pumps Product data Introduction Operating
Submersible Pumps. Pumping Solution. 50 Hz
Submersible Pumps Pumping Solution 0 Hz INTRODUCTION Submersible bore well pumps for (DN 0 mm), (DN 0 mm), (DN 0 mm), (DN 00mm), (DN 0 mm) and (DN 00 mm) wells. Sized for connection to the motor according
Standardised EN 733 centrifugal pumps
F Standardised EN 733 centrifugal pumps PERFORMANCE RANGE Flow rate up to l/min (3 m³/h) Head up to 9 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between - C and +9 C Ambient
FEATURES APPLICATIONS OPERATING DATA MATERIALS OF CONSTRUCTION. Flood control
APPLICATIONS FEATURES Flood control Irrigation Land drainage Pollution control Industry Water refineries Water parks Design OPERATING DATA Capacity:...up to.000 m/h Head:...up to m Max. water temperature:...0
L P Linn-Pumpen GmbH. Submersible Vertical Electric pumps. SVI Series. with high efficiency PLM motors. SVI Series MARKET SECTORS INDUSTRIAL, CIVIL.
Submersible Vertical Electric pumps with high efficiency PLM motors MARKET SECTORS INDUSTRIAL, CIVIL. APPLICATIONS Pumping of coolants, lubrificants and condensate. Machine tools, welders, engine test
SUBMERSIBLE PUMPS SEWAGE RANGE
OPERATING LIMITS Flow rates up to: 00 m /h Head up to: 0 m CL Liquid temperature range: + to 0 C* Density of liquid:.0 max. ph of liquid: - Max. immersion depth: 0 m Max. particle size: Ø 0-0 mm ND discharge
Standard Circulating Pumps
Product review Range: 1 1 3Q [ m³/h] Hz - North America 1 3 1 1 1.x1 1.x x x3 x 1 1 Q [ US gpm] >Single-head pumps: Seal-less circulator with flanged connection. Two speed, manually adjustable to match
IMMERSON S6. SUBMERGED BOREHOLE PUMPS Domestic - Agriculture - Industry 50 Hz OPERATING RANGES APPLICATIONS ADVANTAGES. Certified
OPERATING RANGES Flow rates of up to: 7 m 3 /h Manometric heads of up to : m Max. water temperature: + 3 C Max. sand content: 5 g/m 3 DN of delivery port : G / to G3 IMMERSON S-S SUBMERGED BOREOE PUMPS
4W 50Hz 2900 RPM Noryl Pump
50Hz Noryl Pump DCODE Identification system for Pump x x x xxx x x xx Example :- No of Stage Design No Frequency 50= A /60=B Meter 3 / Hour Mix Flow / Radial Flow Material A=AISI316, B=AISI304 C=Bronze,
JVMG* *NSF 61/Annex G Certification and Compliance with State Codes does not apply to JVMG Models
JVM, JVML SERIES Stainless Steel Construction Closed multi-stage impeller Flow: 4 to 38 GPM Head: to 82 ft. Range of HP: to HP Applications: Commercial booster system, Boiler feed, Jockey, Water Purification,
Standard Circulating Pumps
Product review Range: 1 1 3Q [ m³/h] Hz - North America 1 3 1 1 1.x1 1.x x x3 x 1 1 Q [ US gpm] >Single-head pumps: Circulating pumps with flanged connection > Applications: Drinking-water circulation
HANKIA. DSV type. Single stage,vertical Axially split case double suction pump
DSV type Single stage,vertical Axially split case double suction pump High efficiency and low pulsation Wind performance range with up to 280m head Stable service and low maintenance Heavy duty design
Series description: Wilo-MultiCargo HMC
Series description: -MultiCargo HMC H/m HMC 5 HMC -MultiCargo HMC 3../.. 1 3 5 7 /m³/h Design Self-priming water-supply unit Application Water supply Sprinkling Irrigation and spraying Pumping water from
BARE SHAFT PUMPS AND MOTOR PUMPS
APPLICATIONS Air Conditioning Heating and ventilation Refrigeration Fire protection Plumbing Water Circulation Transfer and Irrigation Pressure Boosting Process Industries Water Treatment and Supply DESIGN
KVC / KVCX GENERAL DATA. motralec VERTICAL MULTISTAGE PUMPS
/ X VERTICL MULTISTGE PUMPS motralec rue Lavoisier. Z Lavoisier. ERBLY CEDEX Tel. :... / Fax. :... Demande de prix / e-mail : service-commercial@motralec.com www.motralec.com X GENERL DT pplications Vertical
Dewatering pumps for raw water pumping GRUNDFOS DW RANGE. Dewatering pump kw
Dewatering pumps for raw water pumping GRUNDFOS DW RANGE Dewatering pump 0.7-20 kw efficient state-of-art dewatering pumps Unique user benefits The Grundfos DW pumps form part of a complete range of wastewater
SUBMERSIBLE VERTICAL ELECTRIC PUMPS SVI SERIES
SUBMERSIBLE VERTICAL ELECTRIC PUMPS SVI SERIES EDIZIONE 09-99 ISO 9001 (UNI - EN 29001) Lowara has obtained top level Quality System certification for the following production plants: Montecchio Maggiore
SERIES 1300 Quality Design Features Assure Long, Trouble-Free Service
SERIES Quality Design Features Assure Long, Trouble-Free Service End Suction WIDE RANGE OF APPLICATIONS: Industrial Process Pollution Control General Pumping Spray Systems Deionized Water Waste Water Clear
Magnetic drive pumps M35 to M200 catalogue
publication date 0/07/08 Magnetic drive pumps M35 to M00 catalogue Presentation of the range M00 Curves M35 M10 Applications : surface treatment, transfer, pumping of chemicals, water treatment, paper
8 Submersible Motors Standard
Applications These motors are built for dependable operation in vertical 8 diameter or larger water wells. Basic Features Double Flanged NEMA mounting design Stainless steel splined shaft StatorShield
BC 35 DOUBLE-CHANNEL. Submersible pumps. PERFORMANCE RANGE Flow rate up to 1900 l/min (114 m3/h) Head up to 31 m
BC 5 Suersile pups DOUBLE-CHANNEL Sewage water Civil use Industrial use PERFORMANCE RANGE Flow rate up to 900 ( /h) Head up to APPLICATION LIMITS 0 axiu iersion depth (with a sufficiently long power cale)
IC Series Constant Pressure Inverter Control System
I Series onstant Pressure Inverter ontrol System racsystems PUMP ISO 0 ertified Explanation pplications: Suitable liquids: pplication onditions: Product Features: ode: Optional order: Installation Precautions
Close-coupled centrifugal pumps
CombiBloc Close-coupled centrifugal pumps CombiBloc CombiBloc is the premier solution for pumping clean thin liquids in a very cost-effective way. The pump is part of Johnson Pump s Combi-system, a modular
Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 Pressure reducing valve Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Cast steel Fig. 701 Page
TD End-Suction Pumps. Operating data Flow rates up to 300 l/sec Head up to 160 metres Temperature 20 0 C to C
TD End-Suction Pumps One of the broadest ranges of pumps available from any British manufacturer, with discharge sizes from mm to 0 mm. Widest choice of materials of construction and options to suit many
Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI Pressure reducing valve ARI-PREDU - ANSI Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling
shop online:
Process systems Liquid ring vacuum pumps Single stage pumps 8 Alpha series single stage liquid ring vacuum pumps 9 AL series single stage liquid ring vacuum pumps 97 Two stage pumps 00 SHR series liquid
Technical Specification _5.0. Concertor N/EA/DP
Technical Specification 886_. Concertor N/EA/DP Table of Contents Table of Contents System Description.... System overview..... Concertor N..... Concertor EA..... Concertor DP... Product Description...6.
PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series 800 Vertical
Axially Split Volute Casing Pump RDLO / RDLO V. Type Series Booklet
xially Split Volute Casing Pump RDLO / RDLO V Type Series ooklet Legal information/copyright Type Series ooklet RDLO / RDLO V ll rights reserved. The contents provided herein must neither be distributed,
High Voltage Induction Motors. 21-MII Series. New High Efficiency Design for High Capacity Applications Up to 3,550 kw (4,750 HP)
High Voltage Induction Motors -MII Series New High Efficiency Design for High Capacity Applications Up to,0 kw (,0 HP) MII Series: Combining over 00 years of experience with innovative new technology makes
Vonk Choke Valve. Flow Control. Features and benefits. Product overview. Technical data. General applications. Model YCV (Y-Type body)
Flow Control Vonk choke valves provide superior performance in abrasive environments, precise flow control and ease of maintenance, delivering operational reliability in the most challenging applications.
SECTION FIVE - SANITARY - MANHOLES
Sealtight & 4 Lug Assemblies* ITEM # DESCRIPTION PART # 1 2 3 4 6 7 8 9 10 DUST COVER VENT (not shown) STAINLESS STEEL DUST COVER HINGE PIN (3/ SEALTIGHT) HINGE PIN (/8 4 LUG) STUD (3/ SEALTIGHT) STUD
JVB VERTICAL MULTISTAGE IN-LINE PUMPS FULL STAINLESS STELL. 50 Hz POMPE VERTICALI IN-LINE COMPLETAMENTE IN ACCIAIO INOX
JVB VERTICAL MULTISTAGE IN-LINE PUMPS FULL STAINLESS STELL Hz JMS ELETTROPOMPE S.R.L. POMPE VERTICALI IN-LINE COMPLETAMENTE IN ACCIAIO INOX VERTICAL MULTISTAGE IN-LINE PUMPS FULL STAINLESS STEEL POMPE
L P Linn-Pumpen GmbH. Electric-gear-pumps series FKM
Electric-gear-pumps series FKM Construction Self-priming electric-gear-pumps, bellhousing with foot-flange, pump-casing in cast iron. Gear-pumps series FKM with motor-power up to 1,5. Suction- and -ports
CR, CRN high pressure
GRUNDFOS DATA BOOKLET CR, CRN high pressure Vertical multistage centrifugal pumps 5/6 Hz Contents Product Data Performance range 3 Product range 4 Applications 4 CRNE 1 and 3 HS 5 CRN 5, 1, 15, SF 6 x
LCC Pump Series - Wear Resistant, High Performance Slurry Pumps
LCC Pump Series - Wear Resistant, High Performance Slurry Pumps 02 LCC Pump Series Solutions for the most Abrasive and Corrosive Slurry Applications With High Performance Wear Resistance, the GIW Minerals
8 Submersible Motors Hi-Temp 75
Applications These motors are built for dependable operation in vertical 8 diameter or larger wells, in applications with higher temperature, higher thrust or low flow. Basic Features Able to operate in
Spectrum 500D 3/4 gpm Functional Specifications Physical Specifications Standards Spectrum 500D (3 or 4 )
The Spectrum Single-Jet Meter is the widest ranged, single measuring element meter available to U.S. utilities. They have been designed to replace maintenance-intensive compound meters and limited range
Mechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems
Well Probe Mechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems The switch can be used to detect the water level within a well. When the water level in the
Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
GRUNDFOS DATA BOOKLET. Dewatering pumps 50 Hz
GRUNDFOS DATA BOOKLET Dewatering pumps 50 Hz Table of contents 1. Introduction 3 Applications 3 Pumped liquids 3 Constructional features 3 2. Identification 5 Type key 5 3. Selection of pump Ordering a
ZMD ZMDV. AXIALLY SPLIT, ONE-STAGE, BETWEEN-BEARINGS PUMPS 50/60 Hz. High reliability and efficiency. Wide range of material options
AXIALLY SPLIT, ONE-STAGE, BETWEEN-BEARINGS PUMPS 0/ Hz ZMD ZMDV High reliability and efficiency Wide range of material options Excellent suction capability due to low NPSH Simple installation and maintenance
Lenntech BMP GRUNDFOS DATA BOOKLET. High-pressure piston pumps 50/60 Hz
Lenntech GRUNDFOS DATA BOOKLET BMP High-pressure piston pumps 50/60 Hz Contents Product data Introduction Page 3 Features and benefits Page 3 Applications Page 3 Pumped liquids Page 3 key Page 4 Motor
MATERIALS ORIENTATION OF THE SUCTION AND DELIVERY CONNECTORS: N. PARTS* MATERIALS CENTRIFUGAL ELECTRONIC PUMPS
ENTRIFUAL ELETRONI UMS KVE 3-6-1 VERTIAL AXIS MULTISTAE ENTRIFUAL UMS WIT ME/ INVERTER TENIAL ATA Operating range: fro 1,8 to 13,5 3 /h, with head up to 158 etres. Liquid teperature range: fro to 35 for
Type. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441, 442 DIN Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 468.01-E DIN, ANSI 40 Cap H2 19 Lock nut 18 Adjusting screw with bushing 16 Upper spring plate 12
4" & 6" Encapsulated Motors
" & 6" Encapsulated s 0 / 60 Hz STIRS INDUSTRIL CO., LTD. General Data " Encapsulated s Stairs Encapsulated motor is developed with market expectation to meet the robust construction and stringent requirement,
Shaft Seal. Accessories
Type series booklet Hz.5/- G Standardized Pumps Fields of Application Water supply Sprinkling Irrigation Drainage Air-conditioning Drinking water Waste water Cooling water Fluid Pure liquids not chemically
Taylor Valve Technology, Inc
MULTI-ORIFICE VALVE Taylor Valve MD SERIES PRODUCTION CHOKES Gas Lift Water Injection Enhanced Oil Recovery Throttling Valve High DP Valve Motor Operated Valve Manual and Automated Applications JAN00-TVT-OKC
MAX FLUID TEMPERATURE
Centrifugal pumps are designed to transfer both corrosive and non-corrosive fluids at maximum hydraulic efficiencies. Centrifugal pumps are not self-priming and must be used in applications where flooded
Taylor Valve Technology, Inc
MULTI-ORIFICE VALVE MD SERIES PRODUCTION CHOKES Gas Lift Water Injection Enhanced Oil Recovery Throttling Valve High DP Valve Motor Operated Valve Manual and Automated Applications JUL0-TVT-OKC SERIES
PACO PUMPS PACO INACTIVE MODELS DRY PIT NON-CLOG REPLACEMENT PARTS GUIDE TYPES NCF, NCP, NCH, NCVU & NCU WITH 5-DIGIT MODEL NUMBERS. D2b.
PACO INACTIVE MODELS DRY PIT NON-CLOG REPLACEMENT PARTS GUIDE TYPES NCF, NCP, NCH, NCVU & NCU WITH 5-DIGIT MODEL NUMBERS PACO CAT#: STOCK#: SER#: PACO GPM: TDH: IMP. DIA. 34014412 While PACO Dry Pit Non-Clog
Spectrum 175D. meter performance with no maintenance.
The Spectrum Single-Jet Meter is the widest range, single measuring element meter available to U.S. utilities. They have been designed to replace maintenance-intensive compound meters and limited range
DIP. Spare parts list. Centrifugal pumps 25, 25-US, 35, 35-US, 65, 65-US Atlas Copco Construction Tools AB No c
DIP 5, 5US, 35, 35US, 65, 65US Spare parts list Centrifugal pumps 0 Atlas Copco Construction Tools AB No. 9800 5 0c 003 DIP 5, 5US, 35, 35US, 65, 65US Contents Contents General information................................................................
MAX 13,300 RPM. C3 Ceramic: Z3 Zirconia Alumina: CONTAMINANT-FREE Iron, Sulfur, and Chlorine 0.1%
WHEEL SPECIFICATIONS ANALYSIS OF TYPICAL WHEEL SPECIFICATIONS Analysis of Typical Wheel Specifications MAX 13,300 RPM www.cgwcamel.com CGW Resin Bond Abrasive Types CGW Coated Abrasive Types A Dark Aluminum
F3 BHQ 4 67 D 1 A
BH*SINGLE VANE PUMP ORDERING CODE F3 BHQ 4 67 D 1 A 00 1 3 4 5 6 7 8 1- F3 means special seals for fire-resistant fluids. Omit if not required. - Pump Type: BHP = vane pump, industrial and mobile use,
Visconomic+. Maximum flow rates for high viscous products. Innovations for a better world.
Visconomic+. Maximum flow rates for high viscous products. Innovations for a better world. Visconomic+. Maximum flow rates for high viscous products. Visconomic+ bead mill. Setting new standards. UV inks
Filter Fan Unit LIGHT
Filter Fan Unit LIGHT Type LIGHT EC Technical Concept Technical Concept Filter Fan Unit LIGHT Product Description Filter Fan Units (FFUs) from M+W Products are designed to provide clean air to individual
Customised Solutions. grundfos industry
Customised Solutions grundfos industry NBG/NKG PUMPS Mix and match to create the ideal for the job at hand 22 2 Motors Grundfos Blueflux technology represents the best from Grundfos within energy efficient
Mechanical accessories
Bearing box Part no. 01209010, 01209029 Part no. 01209010 01209029 Shaft size Ø 15 mm Ø 10 mm Shaft load max Radial: 250 N, Axial: 150 N Speed max 4000 rpm Protection class IP 64 according to IEC 60529
CM - DCM GENERAL DATA. Applications. Constructions features
CM - DCM GENERL DT pplications Circulating pups with IN-LINE connections, suitable for civil and industrial installations for heating, conditioning, refrigeration and clean and safe water. vailable in
Float Flow Meter. Flow measurement for translucent liquids and gases DN10 to DN65 mm. Technical data Orifice DN 10 to 65
Float Flow Meter Flow measurement for translucent liquids and gases DN10 to DN65 mm If a medium sufficient flow rate flows from bottom to top through a vertically inserted measuring tube, then the floated
Technical Concept. Filter Fan Unit LIGHT. Type LIGHT AC Type LIGHT EC
Technical Concept Filter Fan Unit LIGHT Type LIGHT AC Type LIGHT EC Filter Fan Unit LIGHT Technical Concept Product Description Filter Fan Units (FFUs) from M+W Products are designed to provide clean air
Spectrum 50DL. Warranty 5 Yr. Materials & Workmanship 5 Yr. OER Register. Standards AWWA C NSF-61/372. Spectrum 50DL (1 )
The Spectrum Single-Jet Meter is the widest ranged, single measuring element meter available to U.S. utilities. They have been designed to replace limited range displacement meters. The Spectrum meters
Chilled Water Computer Room Air Handler (CRAH) Critical Infrastructure for the World s Leading Data Centers
Chilled Water Computer Room Air Handler (CRAH) Critical Infrastructure for the World s Leading Data Centers DATA CENTER COOLING EXPERTISE Data Center managers have unique needs. Nortek Air Solutions listens
Assembly and Maintenance
Assembly and Maintenance Assembly and Maintenance Test Pumps Pressure Test Pumps Tests all types of installations such as heating, compressed air and refrigeration systems, oil installations, fire lines
Lenntech GRUNDFOS DATA BOOKLET. CME 10. Horizontal, multistage centrifugal pumps 50/60 Hz
Lenntech info@lenntech.com www.lenntech.com GRUNDFOS DATA BOOKLET CME 1 Horizontal, multistage centrifugal pumps 5/6 Hz General description CME Stainless-steel version Fig. 2 Grundfos CME pumps Cast-iron
Spectrum 130D. Warranty 5 Yr. Materials & Workmanship 5 Yr. OER Register Standards AWWA C NSF-61/372
The Spectrum Single-Jet Meter is the widest range, single measuring element meter available to U.S. utilities. They have been designed to replace limited range displacement meters. The Spectrum meters
Vane wheel probe BFA25 for flow measurement of gases and liquids with integrated, configurable transducer UFA in Ex-d housing
Vane wheel probe BFA25 for flow measurement of gases and liquids with egrated, configurable transducer UFA in Ex-d housing Drawing 5 Vane wheel flow probe BFA25 (Dimensions see Page 3) Measurable variables
LC/LCD ranges level controllers
GRUNDFOS WASTEWATER motralec 4 rue Lavoisier. ZA Lavoisier. 95223 HERBLAY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48 Demande de prix / e-mail : service-commercial@motralec.com www.motralec.com
KVC / KVCX - main advantages
/ X - ain advantages novative and odern design Easy and rapid aintenance Flexibility: suitable for various pup types igh perforance Coplete with entirely rust-proof coponents Robust construction Featuring
RD 100. Spare parts list. RD 100 s/n BES Construction Tools PC AB No
RD 100 Spare parts list RD 100 s/n BES100496 2018 Construction Tools PC AB No. 9800153901 2018-10 General information This spare parts list applies to the following: Part number 8311030410 RD 100 Description
This is trial version
s, s, Ejector coupling devices, Unscrewing components, Two-stage ejectors, Latch locking units, Mould slides-modular system 2.01 2.02 Ordering example : Z 40 / 1,6 x 40 Shaft Overall length Z02/... 2.1
Arkal P roduc t Guide
Arkal Product Guide Manual Disc Filters 3 /4-1 - 1 1 /2 3/4 3/4 Filtap 1 1 Super 1 1 /2 1 1 /2 Super Inlet/Outlet Connection 3/4-1 -1 1 /2 Standard Features: Innovative filter design captures and retains
Vonk Choke Valve. Flow Control. Features and benefits. Product overview. General applications. Technical data. Model CHV (Angle Body)
Vonk hoke Valve Model HV (ngle ody) Flow ontrol Vonk choke valves provide superior performance in abrasive environments, precise flow control and ease of maintenance, delivering operational reliability
A3b.2 September, 2014 Supercedes October, 2013 INLINE CENTRIFUGAL PUMPS REPLACEMENT PARTS GUIDE VL, VLC, VLS, VLSC
INLINE CENTRIFUGAL PUMPS REPLACEMENT PARTS GUIDE VL, VLC, VLS, VLSC This guide is valid for all PACO brand products beginning with product codes 16, 17 and Grundfos prodcut codes 26 and 27 only. See back
Operating Instructions Wall saw DZ-S2
Operating Instructions Index 001 10987273 EN /25.07.2007 Congratulations! With a Hydrostress unit from TYROLIT, you have chosen a tried and tested piece of equipment which has been designed and built to
ASTRO 2 CIRCULATORS. ASTRO 2 3-Speed Circulators (except Astro 286):
DATE: January 30, 015 DATE: January 5, 014 ASTRO 3-Speed Circulators (except Astro 86): ASTRO CIRCULATORS IRON BODY CONSTRUCTION (Includes Check Valve) Model No. Part No. Connection List Price Wt.ea.lbs.
The CLIPPER Solutions
The CLIPPER Solutions 151 CT601 2,2 > 2,9kW Ø 620mm 62 > 65kg Electric The CT601 is a light weight machine, ideal for small surfaces and for trowelling along walls. Foldable machine arm Blades safety guard
Echotouch, EchoSpan & EchoSwitch Ultrasonic Liquid
Echotouch, EchoSpan & EchoSwitch Ultrasonic Liquid The Echotouch, EchoSpan and EchoSwitch are innovative ultrasonic liquid level sensor families that replace float, conductance and pressure sensors that
Choke Valves SINCE1958. Unique. Precise. Quality. Reliable.
SINCE1958 MDA / MDAS Choke Valves Unique. Precise. Quality. Reliable. MDA / MDAS SERIES CHOKE VALVES FEATURES enefits T aylor Valve MDA / MDAS Series Chokes are made with wear resistant material to extend
FluidControl Unit FCU 2010/FCU 2110
FluidControl Unit /FCU 2110 1 1. OIL CONDITION MONITORING AND OIL SERVICING 1.1. THE CONCEPT For hydraulic systems and lubrication systems to operate reliably it is imperative that the operating fluid
CR, CRN high pressure
GRUNDFOS PRODUCT GUIDE CR, CRN high pressure Vertical multistage centrifugal pumps 6 z Contents Mission 3 Product overview Performance range Product range 5 Applications 6 CRNE 1 and 3 S 7 CRN 5, 1, 15,
RA /2.95. Gear Pump Model G2 (Series 4X) For Flange Mounting with SAE threaded Ports. Functional description. Symbols
/2.9 Gear Pump Model G2 (Series X For Flange Mounting with SE threaded Ports s to 22... 6 PSI (2 bar....7 in /rev. (22. cm /rev. /2.9 eplaces: 2.92 New principle of sealing the pump body, increases service
SIZES FROM 1, ,000 Nm BACKLASH FREE, TORSIONALLY STIFF METALLIC BELLOWS COUPLINGS
BX ZA SIZES FROM 1,500-100,000 Nm BAKLASH FREE, TORSIONALLY STIFF METALLI BELLOWS OUPLINGS BELLOWS OUPLINGS BX ZA Optional: GENERAL INFORMATION ABOUT R+W BELLOWS OUPLINGS: SERVIE LIFE R+W bellows couplings
Data sheet: Wilo-Stratos 40/1-8
Data sheet: Wilo-Stratos 4/1-8 Pump curves 1 2 v 3 4 DN4 m/s,5 1, 1,5 2, 2,5 DN5 H/m Wilo-Stratos 4/1-8 p/kpa Wilo-Stratos 5/1-8 48 1 /min - 1 V 1~23 V - DN 4 / DN 5 8 8 P 1/W n= const 6 383 1 /min - 8
Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group
Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability
Choke Valves SINCE1958. Unique. Precise. Quality. Reliable.
SINCE95 MC SERIES Choke Valves Unique. Precise. Quality. Reliable. MOV Valve Principle of Operation Taylor Valve Technology Multi-Orifice Valve Design Principle Provides Precision Control. The two adjacent
TEX. Spare parts list. Handheld pneumatic pick hammers 03PS Atlas Copco Construction Tools AB No
TEX 0PS Spare parts list Handheld pneumatic pick hammers 0 Atlas Copco Construction Tools AB No. 9800 0976 0 004 TEX 0PS Contents Contents General information................................................................
BASE. Rotary limit switch OPTIONS FEATURES CERTIFICATIONS
Rotary limit switch BASE Rotary limit switch used to control and measure the movement of industrial machines. Its compact size make it suitable for use in narrow spaces. FEATURES It consists of a gear
Sensor Wafer MUT 1000 EL DS120-1-ENG
Electromagnetic Flowmeter dg: www.oryana.com.ar NEW Sensor Wafer MUT 1 EL DS12-1-ENG 1 / 1 Sensor MUT 1 EL MUT 1 EL sensors represent the state of the art of EUROMAG INTERNATIONAL production for water
Data is only for informational purpose. All specifications are subject to change without notice.
MV Data is only for informational purpose. All specifications are subject to change without notice. 1 First in knife gate 2018-12-19 solutions issue 24 Knife gate valve MV Stafsjö s knife gate valve MV
WATER PUMPING SYSTEM WATERBOX
WATER PUMPING SYSTEM WATERBOX WHAT IS THE WATERBOX? WATERBOX is a complete plug&play solution for the most simple installation of a solar borehole pumping system: The smart solution to enable any user
UNIFLEX TRIPLE SPRING COUPLING
Specialty Couplings Overview Uniflex Coupling Design Flexible Spring Type Coupling with Exclusive Triple Wound Spring Design The Uniflex Coupling is an all steel, single piece coupling that solves a variety
SSC Series Flexible Spiral Conveyers
SSC Series Flexible Spiral Conveyers Date: Apr, 2013 Version: Ver.B (English) Contents 1. General Description... 5 1.1 Coding Principle... 6 1.2 Feature... 6 1.3 Technical Specifications... 8 1.3.1 Technical
SERIES 4360 "VERTICAL" OR MOTOR MOUNTED PUMP CENTERLINE DISCHARGE "D" DESIGNATION PARTS LIST 1-1/4" IMPELLER BORE /8" MECHANICAL SEAL NEW DESIGN
FILE NO.: 6043.126 DATE: May 11, 2010 SUPERSEDES: 6043.126 DATE: March 18, 2010 PARTS LIST SERIES 4360 "VERTICAL" OR MOTOR MOUNTED PUMP CENTERLINE DISCHARGE "D" DESIGNATION 1-1/4" IMPELLER BORE -- 1-5/8"
1.7 Z 414-A LUG TYPE BUTTERFLY VALVE Z 414-A.
LUG TYPE BUTTERFLY VALVE -A TECHNICAL DATA Nominal diameter: da ( ) - da ( ) (SDR ) da ( ) - da ( ) (SDR (SDR / SDR, / SDR ) Face-to-face: EN 55 Series (DIN 32 T3 K1) ISO 5 Series API 09 Table 1 BS 55
robust advanced technology Accessories » for mobile and stationary Ringler suction systems
www.ringler-gmbh.de robust advanced technology Accessories» for mobile and stationary Ringler suction systems Valid from 01.01.2013 Information Dear Customer, This catalog gives you an important selection
KUBOTA Corporation PUMPS CATALOGUE.
PUMPS CATALOGUE KUBOTA Corporation DOMESTIC OFFICES AND OVERSEAS OFFICES Domestic Offices: Tokyo Office 1-, Kyobashi, 2-chome, Chuo-ku, Tokyo -7 Japan Phone: +1--25-22 Facsimile: +1--25- Overseas Offices: