Window shutters from Griesser. Shear folding shutters

Transcription

1 Window shutters from Griesser. Shear folding shutters

2 Griesser shear folding shutters. 2 Window shutters

3 Shear folding shutters trend-setting technology CE-tested Architectural accents Lighting atmosphere in the building Color stability Maximum processing quality Additional wind and privacy protection Burglary-resistant Space-saving Available with modern drive technology Shear folding shutters for special lighting atmospheres and shade effects Shear folding shutters are an attractive alternative to sliding, folding or swinging shutters that offer interesting opportunities for architectural design. The design options are unlimited. Furthermore, shear folding shutters from the Griesser Company enable special lighting atmospheres and shading effects in rooms through various opening angles. When open, the shear folding shutters are at right angles to the facade and provide privacy and protection against wind, even when they are half-open. The latest in electrical drive technology and controls ensures great convenience. Practically all of the standard swinging and sliding shutter models can be used as shear folding shutters. A system full of advantages Complete integration in the motors of the housing, protection class IP54/24 VDC Can be used on practically all existing model types Motors run noiselessly and precisely Simple and rapid installation, thanks to pre-assembly at the factory Simple integration of wind sensor and wireless control, etc. 2-8 sashes per element possible Technical data Maximum sash weight Maximum sash width Sash depth Element widths 20 kg 550 mm mm up to mm possible 3 Window shutters

4 4 Window shutters

5 Fixed slats Model A The traditional one with fixed slats Model A is made of high-quality extruded aluminum profiles. This model variation is used in a wide variety of building versions. Our slat profiles are embedded directly into the frame. This lends our Model A a very high stability and enables us to manufacture large-surface elements as well. Frame profile: 71 x 33 mm SLIM: 40 x 33 mm Slat profile: 50 x 10 mm with 2 dividers for reinforcement Model T The modern one with opaque slats Model T catches the eye with its opaque design, while at the same time the slats are uniform in appearance inside and out. The slat profiles are embedded directly into the frame, thus providing the Model T version with very great stability. That means that this model is particularly suitable for large-surface versions, although it is very often also used as a divider element for balconies. Frame profile: 71 x 33 mm Slat profile: 50 x 18 mm with dividers for reinforcement Model R with the modern rhomboid slat Model R is made of high-quality extruded aluminum profiles. Our modern rhomboid slats are embedded directly into the frame, thus ensuring an optimum connection between frame and slats. Innovative facade views can be implemented with this product solution using different installation versions. Frame profile: 70 x 30 mm Slat profile: 60 x 6 mm with 2 dividers for reinforcement 5 Window shutters

6 Fixed slats Frame profile: Slat profile: or 42 x 31 mm 60 x 15 mm 35 x 15 mm Model H Alu SLIM, aluminum frame with rhomboid aluminum slats in SLIM version The frame of the Model H Alu SLIM is manufactured from high-quality extruded aluminum profiles. The aluminum slats are screwed to the narrow frame from the back with a U-profile. The gap between slats and frame is 4 mm at the top, 0-14 mm at the bottom mm and 1 mm on the sides. *Standard distances as a straight view between the slats: 7 mm, optional 12 mm possible at no extra charge (or also in accordance with preference following clarification) Frame profile: Slat profile: Wooden slats made of Siberian larch, 42 x 31 mm 60 x 15 mm Model H Wood SLIM, aluminum frame with wooden slats in SLIM version The frame of the Model H Wood SLIM is manufactured from high-quality extruded aluminum profiles. Our wooden slats from untreated Siberian larch are attached to the frame with hidden screws. The frame can be coated in all colors. The gap between wooden slats and profile is 4 mm at the top, 0-15 mm at the bottom and 5 mm on the sides. *Standard distances as a straight view between the slats: 7 mm, optional 12 mm possible at no extra charge (or also in accordance with preference following clarification) 6 Window shutters

7 Fillings, linings Frame profile: 70 x 30 mm or 40 x 40 mm Lining: Soltis textile (Polyester, PVC) 92 or 86 Model Soltis, aluminum frame with fabric lining from Soltis The Soltis model exhibits the optimum composite of aluminum and Soltis fabric. The fabric lining is fixed in place using a weather stripping profile and stretching screws in the frame. The composite structure of the Soltis textiles lends them an exceptionally high resistance to the effects of climate and weather conditions. The frame is available in all colors. The gap between the frame profile and the Soltis lining is approximately 10 mm on all sides. Model S with aluminum sheeting Model S is made of an extruded profile frame and 2 mm aluminum sheeting. The aluminum sheeting is beveled and riveted at the top and bottom and on the sides. This makes for a flat, rivet-free visible surface. Frame profile: 70 x 30 mm or SLIM: 40 x 31 mm Metal sheeting: 2 mm aluminum sheeting, beveled and riveted at the top and bottom and on the sides Model SL perforated aluminum sheeting Model S-L is made of an extruded profile frame and perforated 2 mm aluminum sheeting. The aluminum sheeting is beveled and riveted at the top and bottom and on the sides. This results in a flat, rivet-free visible surface that can be varied with different perforation patterns. In addition to standard perforations (square or round holes), individualized perforation patterns can also be implemented. Frame profile: 70 x 30 mm or SLIM: 40 x 31 mm Metal sheeting: 2 mm perforated aluminum sheeting, beveled and riveted at the top and bottom and on the sides 7 Window shutters

8 8 Window shutters

9 Signature line Model Sentum Slim, aluminum frame with expanded metal Model Sentum SLIM is made of an extruded profile frame with narrow visible surface and riveted expanded metal. The aluminum sheeting is riveted all around on the surface side. The up-to-date expanded metal appearance enables shading even with light falling into the building. Frame profile: 42 x 31 mm Filling: 2 mm expanded metal aluminum, Type Rijeka, approx. 10% see-through, riveted into the frame on the surface side Model Platina, aluminum frame with Fundermax plate Model Platina is made of an extruded profile frame and a Fundermax Uni-Decor plate. In contrast to the SLIM version, here no frame is visible from the front. The Fundermax plate is thereby riveted to the frame all around on the surface side. Above all, this model offers a suitable combination with facades of modern design and uses horizontal and vertical friezes to enable the use of large-scale sliding shutters as well. Frame profile: 70 x 30 mm or SLIM: 42 x 31 mm Filling: Max Exterior plate, F-Quality UNI-Decor on both sides, 8 mm 9 Window shutters

10 Limit dimensions, types of installation 10 Window shutters

11 Limit dimensions Fixed slats Model A, A SLIM Model T Model R Model H Alu SLIM Model H Wood SLIM Width mm mm mm mm mm Height* mm mm mm mm mm Fillings, linings Model Soltis Model S, S SLIM Model SL, SL SLIM mm mm mm mm mm mm Signature line Model Sentum SLIM Model Platina, Platina SLIM mm mm mm mm Limit dimensions act as an aid for orientation. Precise dimensions can also be obtained from the price list. Folding scissor shutter design With 2, 3 or 4 sashes 5-sash 6-sash 7-sash 8-sash Height* max mm max mm max mm max mm max mm * Height dimension is dependent on the number of sashes in the system Shear folding shutters, a design for every application Shear folding shutters can be furnished with up to eight sashes per system. Thanks to the possibility of combining left-hand and right-hand systems, symmetrical and asymmetrical systems can used in any combination, thus making it possible to implement up to 16 sashes per window. A design with an even or uneven number of sashes for each system is possible in the standard version.... Shear folding shutters limit stop pattern, extract 11 Window shutters

12 Folding scissor runner rail Type G Guide rails Bottom installation Type H Guide rails Wall installation Type H Ceiling installation Installation advantages Mounting bracket for the simplest of pre-installations to the ceiling Sheathing of the runner rail with integrated cover screen Installation to insulation facades is also possible Folding scissor shutter installation is always performed by fastening the runner rail directly to the external wall using the mounting bracket supplied. The runner rail is then only hooked to the mounting bracket and fastened in place, which means that this can also be readily dismantled again later. The guide rails can be mounted in such a way so that they are open either upwards or downwards. A cover screen is used to conceal the runner rail and the armatures running inwards. It is usual to mount the sash elements inside the reveal with this installation variant. The sash elements are always up against the runner rail when closed, while being at a 90 angle to the facade when open. 12 Window shutters

13 Folding scissor runner rail Type G Guide rails Wall installation T Type H External wall installation Installation advantages Mounting bracket for the simplest of pre-installations to the external wall Installation across more than floor of the building possible Sheathing of the runner rail with integrated cover screen Installation to insulation facades is also possible Folding scissor shutter installation is also always performed in this situation by fastening the runner rail directly to the external wall using the mounting bracket supplied. The runner rail is then only hooked to the mounting bracket and fastened in place, which means that this can also be readily dismantled again later. The guide rail is screwed on without additional installation or adapter material. The advantage of this version is clearly the option of installation across more than one building floor. Here, too, the sash elements are always up against the runner rail when closed, while being at a 90 angle to the facade when open. 13 Window shutters

14 Motorization/controls 14 Window shutters

15 The automatic choice. Automation solutions for shear folding shutters extend the attributes of the window roller shutter as an architectural style element and classical shading component to include the property of operating convenience. Individual elements or entire groups can be moved via button, bus control or even wireless controls without windows or doors having to be opened. In addition, radio systems have the advantage of being installed quickly, not only in new buildings but also when refitting an automated system in existing buildings. The associated control is integrated in the switch cabinet in the standard configuration. ELECTRICAL DRIVE Shear folding shutters Individual or master control Automatic timer Automatic sun control Safety sensing edge with wind or rain sensor Flexible lighting atmosphere, trend-setting technology Thanks to their electronic controls, shear folding shutters offer the opportunity of controlling the lighting atmosphere in a building in a way that was not previously possible with window roller shutters. Sun, wind and rain sensors are used to adjust the elements to a wide variety of weather conditions. Furthermore, additional solutions can also be used to store automatic timers, vacation programs, etc. In terms of hardware, a number of solutions are available here from Griesser for application. The sashes are stabilized by the scissor technology and thus also protected mechanically against weather conditions. Tailored shading concept The motors used by Griesser are low-noise, precise and reliable. The version can be used with both even and odd numbers of sashes. This means that an individualized shading concept can be implemented for each of them. Griesser BiLine wireless control 15 Window shutters

16 Griesser colors and look without limitations. 16 Window shutters

17 Colors The colors of our window roller shutters should reflect your wishes, lend distinction to the character of the architecture and create a personal atmosphere. These wishes are a daily challenge to our developers, planners and lacquerers. Powder coating The powder coating of aluminum has proven to be an environmentally friendly, costappropriate and long-lasting alternative to lacquering. It is resistant to both impacts and weather. RAL, NCS, VSR, Pantone and Metallic colors as well as wood decor The wide color spectrum from Griesser leaves nothing to be desired and permits a great deal of freedom for individual design preferences. Surfaces Variety for every purpose With the aid of a special coating process, Griesser window roller shutters can be produced in a variety of surface appearances such as semi-gloss, smooth and finely structured. The surface structure provides the color or the decor once again with a new appearance. Wood materials, facade plates and textiles In addition to the colors, a variety of structures is also possible. The unique feature here is the wood decor: It convinces not only by its astoundingly true-to-nature appearance, but also by its outstanding weather-resistance. Special combinations of materials also contribute to the great variety of Griesser window roller shutter models. From individually printable fabric covers made of Soltis textile to slat versions made of natural wood, Plexiglas or Fundermax there are practically no limits to fulfilling customer preferences. Surface structure for window roller shutters Fine structure-matte Semi-gloss High weather-resistant-matte Color variants Color designation RAL K7, fine structure-matte (fsm), semi-gloss (sgl) RAL K7, highly weather-resistant (hwf) matte, 22 standard colors RAL K7, highly weather-resistant (hwf) matte, other colors VSR NCS Qualimarine Seaside Class Price Standard Standard Surcharge Standard Surcharge Surcharge 17 Window shutters

18 The illustration shows the points of weakness and the proportionate danger of a break-in. Roof window 2% Balcony/patio 20% Ground floor windows 13% House door 2% Basement window 11% Basement door 25% Garage 5% Lightwell 9% Back door 13% Safety 18 Window shutters

19 Smart electronics Motorization Simple closing of the house at the push of a button. Control center Closing all of the window roller shutters at the push of a button when leaving the house. Automation A random switching feature makes the house appear occupied. Safety through smart electronics An automated solar shading system offers more than just aesthetics and thermal comfort. It also creates safety. The first three minutes are decisive when it comes to an attempted break-in. Even the most secure window roller shutters are of no use if one forgets to close them when one leaves the house. This is where the automation solutions with state-of-the-art electronics from Griesser come into play. They close the window roller shutters at the simple press of a button and you can have the house appear to be inhabited by using random switching or an automatic timer. Security through optimum product coordination Products from Griesser offer both mechanical and electronic safety systems in order to meet the increasing security needs of the residents and the safety requirements of the insurance companies. On the one hand, the folding scissor system offers necessary safety intervals while on the other hand an additional protection mechanism is integrated by means of the smart and tested electronics. Shear folding shutters, certified safety The designated product meets the stipulations contained in the directives: Directive 2006/42/EC on machinery, with amendments Directive 2004/108/EC on electromagnetic compatibility, with amendments Directive 2006/95/EC on low-voltage devices, with amendments Construction Products Regulation 305/2011 (replaces the Construction Products Directive 89/106/EEC) Compliance with the stipulations contained in the directives is documented by adherence to the following standards: EN EN EN EN EN The entire system is DIN-tested and thus in conformance with CE. Development and design took place in accordance with EN The following tests have been performed and classified: Test description Resistance against repeated operations Utilization safety - danger of injury during operation Resistance to wind load Incorrect operation - corner load Corrosion behavior Classification standard EN EN EN EN EN 1670 Testing standard EN EN EN 1932 EN ISO 9227 Classification 3 provided 6 passed passed 19 Window shutters

20 Subject to change without prior notice V04.14