NMB SPLICE-SLEEVES ORDER GUIDE

Transcription

1 ORDER GUIDE SYSTEM PRE-GROUTING POST-GROUTING HORIZONTAL APPLICATION Operation Determine Number and Size of Sleeves location, consider UPSIZE for more tolerance. B. If rebars change size across the joint, use LARGER size. location, consider UPSIZE for more tolerance B. If rebars change size across the joint, use LARGER size. Splice Sleeve (SS) Splice Sleeve (SS) Splice Sleeve (SS) location. B. If rebars change size across the joint, use LARGER size. Hole Seals (HS) Hole Seals (HS) Hole Seals (HS) Rubber Plugs at Narrow end (RP) Rubber Plugs at Narrow end (RP) Rubber Plugs at Narrow end (RP) Separate Order Separate Order Separate Order At Precast Plant Site Sleeve Setter (STR) CAM or PIN Type Sleeve Setter (STR) CAM or PIN Type Sleeve Setter (STR) - CAM or PIN Type PVC Tubing (PVC) PVC Tubing (PVC) Model U-X Model U-X 22 mm - Inlet Port (Metric Size) 22 mm - Inlet Port (Metric Size) NO Tubing Required 14 mm - Outlet Port (Metric Size) 14 mm - Outlet Port (Metric Size) Model SNX 11 and A11W Model SNX 11 and A11W 3/4 in. - Inlet Port (US Schedule 40 Size) 3/4 in.- Inlet Port (US Schedule 40 Size) 1/2 in. - Outlet Port (US Schedule 40 Size) *Locally Available. Not Sold by SSNA. 1/2 in.- Outlet Port (US Schedule 40 Size) *Locally Available. Not Sold by SSNA. Splice Sleeve (SS) Splice Sleeve (SS) Splice Sleeve (SS) Cast-In-Place Construction Hole Seals (HS)- Not Required Hole Seals (HS) Hole Seals (HS) Rubber Plugs at Narrow End (RP) Rubber Plugs at Narrow End (RP) Rubber Plugs at Narrow End (RP) PVC Tubing (PVC)- Not Required PVC Tubing (PVC)- See Above for details PVC Tubing (PVC)- If post grouting Separate Order Separate Order Separate Order ~~~~N.A.~~~~ Rubber Plugs at Wide End (RP) Rubber Plugs at Wide End (RP) Erection ~~~~N.A.~~~~ Grout Washer (GRW) [included with NMB Splice Sleeve Order] Coil Spring (CS) [ Separate Order] Grout Washer (GRW) [included with NMB Splice Sleeve Order] SS Mortar (See Chart on Page 3) SS Mortar (See Chart on Page 3) SS Mortar (See Chart on Page 3) Grouting NMB approved Mixer Paddle (MP) NMB approved Mixer Paddle (MP) NMB approved Mixer Paddle (MP) ~~~~N.A.~~~~ Stopper with Indicator (SWI) Stopper with Indicator (SWI) ~~~~N.A.~~~~ Self-Sealing Valve (SSV) Self-Sealing Valve (SSV) ~~~~N.A.~~~~ Rubber Stoppers Rubber Stoppers ~~~~N.A.~~~~ Grout Pump GP2 Grout Pump- GP2 ~~~~N.A.~~~~ Handy Pump (HDP) Fill up to 9U-X Handy Pump (HDP)- Fill up to 9U-X Note: Each set of NMB sleeve consists of Rubber Plug (RP) or Elastomer Plug (EP), Grout Washer (GWR), and Hole Seals (HS)

2 Sleeve No. Bar Diamete r DIMENSIONS OF ASTM Bar Size U.S. Metric Sleeve Length (L) Narrow End Diameter I.D. (C) O.D. (C ) Max. Dia. (B) I.D. (A) Wide End Diameter Total Tolerance RECOMMENDED REBAR EMBEDMENT LENGTH Factory Dowel (E1) Field Dowel (E2) O.D. (A ) Min. Max. Min. Avg. Max. SS Mortar lbs. per Sleeve (kg) 5U-X #5 16 MM 9.65 (245) 0.87 (22) 1.50 (38) 1.26 (32) 0.63 (16) 4.13 (105) 4.33 (110) 4.13 (105) 4.53 (115) 1.26 (0.57) 6U-X #6 20 MM (285) 1.02 (26) 1.65 (42) (36) 0.67 (17) (130) 5.32 (135) 1.76 (0.80) 7U-X #7 22 MM (325) 1.14 (29) 1.77 (45) 2.36 (60) 0.86 (22) 2.36 (60) 5.91 (150) 6.11 (155) 2.65 (1.20) 8U-X #8 25 MM (370) 1.30 (33) 1.93 (49) 2.52 (64) 2.52 (64) 6.69 (170) 6.99 (178) 7.48 (190) (1.57) 9U-X #9 28 MM (415) 1.42 (36) (51) (188) 7.56 (192) 7.40 (188) 7.88 (200) 8.35 (212) 3.95 (1.79) 10U-X #10 32 MM (455) 1.57 (40) 2.28 (58) 2.87 (73) 2.16 (55) 2.87 (73) 8.19 (208) 8.35 (212) 8.19 (208) 8.66 (220) 9.13 (232) 4.94 (2.24) 11U-X #11 35 MM (495) 2.40 (61) 2.32 (59) (232) (240) 9.92 (252) 6.02 (2.73) SNX #11 35 MM (485) 1.69 (43) 2.32 (59) 9.25 (235) 8.27 (210) 9.45 (240) (2.59) A11W #11 35 MM (495) (66) 1.19 (30) (246) 8.27 (210) (241) 6.99 (3.17) 14U-X #14 40 MM (620) 2.01 (51) 2.80 (71) (88) 2.60 (66) (88) (290) (295) (290) (303) (315) 9.19 (4.17) 18U #18 57 MM (920) (93) 4.25 (108) 3.27 (83) 1.01 (26) 4.25 (108) (432) (460) (432) (446) (460) (11.48) B

3 NMB Splice- Sleeves Model 5U-X through Model 14U-X and 18U NMB Splice- Sleeves Model 11U-X, A11W, SNX11

4 REBAR SIZE SPLICE-SLEEVE SS MORTAR U.S. METRIC MODEL LB./SLEEVE SLEEVES/BAG #5 16 MM 5 U-X #6 20 MM 6 U-X #7 22 MM 7 U-X #8 25 MM 8 U-X #9 28 MM 9 U-X #10 32 MM 10 U-X #11 35 MM 11 U-X #11 35 MM SNX #11 35 MM A11W #14 40 MM 14 U-X #18 57 MM 18 U Inlet + Outlet PVC tubes x Note: An additional overage of 15% is recommended to provide for typical waste and field loss. When upsizing add 20% for each rebar size. CURING TEMPERATURE SS MORTAR COMPRESSIVE STRENGTH, PSI (MPA) 12 HRS. 18 HRS. 1 DAY 3 DAYS 7 DAYS 28 DAYS 41 (5 ) (6) 1,869 (13) 5,823 (40) 8,871 (61) 13,860 (96) 50 (10 ) 410 (3) 1,869 (13) 2,905 (20) 6,858 (47) 9,907 14,895 (103) 68 (20 ) 1,869 (13) 3,328 4,364 (30) 8,317 (57) 11,366 (78) 16,354 (113) 86 (30 ) 2,905 (20) 4,364 (30) 5,399 (37) 9,352 (64) 12,401 (86) 17,389 (120) 104 (40 ) 3,708 (26) 5,167 (36) 6,202 (43) 10,155 (70) 13,204 (91) 18,192 WATER VOLUME 0.98 gal (3.7 liters) MIX TEMP 68 (20 ) CURING TEMP SET TIME HR-MIN INITIAL FINAL FLOW GUIDE BLEEDING % 41 (5 ) 9 hr. 31 min. 13 hr. 35 min. 6 1/4" (160 mm) 0.00% 68 (20 ) 4 hr. 18 min. 5 hr. 55 min. 6 5/8" (170 mm) 0.00% 86 (30 ) 2 hr. 23 min. 3 hr. 20 min. 6 1/2" (165 mm) 0.00% HOW TO DETERMINE THE LENGTH OF PVC TUBES Size: Grout inlet tubes: I.D. 0.87" (22 mm) O.D. 1.02" (26 mm). Grout outlet tubes: I.D. 0.55" (l4 mm) O.D. 0.71" (l8 mm). The length of the PVC tubes (L1 and L2) shall be calculated as mentioned below: Outlet Port: LL 11 = AA BB 11 Inlet Port: LL 22 = AA BB 22 where, A : The length from the concrete surface to the center of the sleeve. B 1 B 2 : The distance from the center of the sleeve to where the outlet port PVC tubes are attached. : The distance from the center of the sleeve to where the inlet port PVC tubes are attached.

5 Sleeve Size Bar Size B1 () B2 () 5U-X # U-X # U-X # U-X # U-X # U-X # U-X # SNX-11 # A11W # U-X # U # SQUARE & RECTANGULAR COLUMNS: Grouting can be done from any face. SPECIAL SITUATIONS: Where grouting access is restricted, such as for architectural panels, or when certain faces are inaccessible or hidden. Splice Sleeve North America, Inc West Six Mile Road, Suite 205 Livonia, MI USA Tel: Fax: Website: Over 23 Million NMB Splice-Sleeves Sold World-Wide