STR MPA - MPM SUCTION FILTER. Flow rates to 240 gpm

Transcription

1 STR MPA - SUCTION FILTER Flow rates to 24 gpm

2 D e s c r i p t i o n STR These filters are particularly suitable for applications where it is necessary to protect pumps These strainers are suitable for use in the suction line, submerged in the reservoir. They are available for nominal flows up to 24 gpm (with oil at 15 SUS). from coarse particles of contamination. STR series are available with or without a bypass valve. MPA- series are equipped - with safety tie rod. series are supplied with an internal magnet column. UNI EN ISO 91 N 37/98 STR /2./USA 2

3 MP Filtri - Filtration Technology Filter element: Materials STR series Connection and End cap: Nylon Support tube: Galvanized Steel Bypass valve: Nylon MPA- series Connection: Aluminium End cap: Galvanized Steel Support tube: Galvanized Steel Nut and tie rod: Galvanized Steel Element material Nominal filtration MSeries Square wire mesh (filtration degree is defined in microns by the maximum diameter of a sphere corresponding to the mesh size). Filtering area Filter elements STR series Type STR M M M Values in 2 MPA- series Type MPA M M M Values in 2 Working Temperature Bypass valve Setting pressure STR series MPA- series Bypass valve, differential opening pressure: (STR series only) From -13 F to + 23 F From -4 F to F For temperature outside this range, please consult our Sales Network Organization B: 4.5Psi ± 1% Compatibility with fluids As per ISO 2943; suitable for mineral oils (types HH-HL-HM-HR-HV-HG as per ISO 6743/4) synthetic fluids (types HS-HFDR-HFDS-HFDU as per ISO 6743/4) For water-based emulsions (type HFAE-HFAS as per ISO 6743/4) and fluids other than those mentioned, please consult our Sales Network Organization. 3

4 Selection & installation information Filter element types M series Metal mesh media, available in 6,9 or 25 µm Example - M6, M9 or M25 The following filter setting recommendations are based using a mineral oil fluid at 15 SUS with a maximum total filter pressure drop of 1.15 Psi (,8 bar). H1 A OUT OUT STR STR SERIES Type A B H H1 Ch Weight Max (Lbs) H H1 B Ch max 6 mm (only solo versione with con bypass) 5-1 G1 5-1 G2 5-2 G1 5-2 G2 7-1 G1 7-1 G2 7-2 G1 7-2 G2 7-3 G1 7-3 G2 7-4 G1 7-4 G2 1-1 G1 1-1 G2 1-2 G1 1-2 G2 1-3 G1 1-3 G2 1-4 G1 1-4 G2 1-5 G1 1-5 G G G G G G G G G G G G G2 3/8 BSP 3/8 NPT 1/ 1/ 1/ 1/ 3/4 BSP 3/4 NPT 3/4 BSP 3/4 NPT 1 BSP 1 NPT 1 1/4 BSP 1 1/4 NPT 1 1/4 BSP 1 1/4 NPT 1 1/ 1 1/ 1 1/ 1 1/ 1 1/ 1 1/ 2 1/ 2 1/ 3 BSP 3 NPT 3 BSP 3 NPT Filter element pressure drop /8 1/2 3/ /4 1 1/ / ,

5 STR Ordering code example 5-1 B G1 M6 Example order STR Strainer Series M 6 M 9 Micron rating Wire mesh M 25 Nominal sizes 5-1 3/8 - H /2 - H /2 - H /4 - H /4 - H H /4 - H /4 - H /2 - H H /2 - H /2 - H H H /2 - H H H33 G1 G2 S B Connections BSP Thread NPT Thread Bypass valve Without bypass With bypass 5

6 Selection & installation information Filter element types M series Metal mesh media, available in 6,9 or 25 µm Example - M6, M9 or M25 The following filter setting recommendations are based using a mineral oil fluid at 15 SUS with a maximum total filter pressure drop of 1.15 psi. A OUT MPA MPA - SERIES H H1 MPA SERIES Filter element pressure drop B Ch SERIES Type A B 12 G1 12 G2 15 G1 15 G2 25 G1 25 G2 3 G1 3 G2 G1 G2 5 G1 5 G2 G1 G2 95 G1 95 G2 12 G1 12 G2 15 G1 15 G2 18 G1 18 G2 22 G1 22 G2 28 G1 28 G2 3 G1 3 G2 38 G1 38 G2 43 G1 43 G2 3/8 BSP 3/8 NPT 1/ 1/ 1/ 1/ 3/4 BSP 3/4 NPT 3/4 BSP 3/4 NPT 1 BSP 1 NPT 1 BSP 1 NPT 1 1/4 BSP 1 1/4 NPT 1 1/4 BSP 1 1/4 NPT 1 1/ 1 1/ 1 1/ 1 1/ 2 1/ 2 1/ 3 BSP 3 NPT H H1 Ch Weight Max (Lbs) , /8 1/2 3/ /4 1 1/ / ,

7 Ordering code example MPA 5 G1 M6 Example order MPA Series Complete strainer without int. magnet Complete strainer with int. magnet M 6 M 9 Micron rating Wire mesh M 25 Nominal sizes 12 3/8 15 1/2 25 1/2 3 3/4 3/ / / / / / G1 G2 Connections BSP Thread NPT Thread MP Filtri - Filtration products will only be guaranteed if original MP Filtri replacement elements and spares are used Data held in this publication is given only for indicative purposes. MP Filtri reserves to introduce modifications to described items for technical or commercial reasons. Copyright reserved. 7

8 Head Quarter : MP FILTRI S.p.A. Italy Via Matteotti, 2 26 Pessano con Bornago (Milano) Italy Tel / Fax / sales@mpfiltri.com GREAT BRITA MP FILTRI U.K. Ltd. Bourton Industrial Park Bourton on the Water Gloucestershire GL54 2HQ UK Phone: Fax: sales@mpfiltri.co.uk GERMANY MP FILTRI D GmbH Am Wasserturm 5 D Heusweiler/Holz Phone: 686/8522- Fax: 686/ mpfiltrink@aol.com U.S.A.: MP FILTRI U.S.A. Inc. 1256C Oakbrook Drive - Norcross, Georgia - U.S.A. 393 Phone: Fax: mpusasales@aol.com CANADA: MP FILTRI CANADA Inc. 21 Jacob Keffer Parkway Concord, Ontario Canada L4K 4W3 Phone: Fax: mail@mpfiltricanada.com