2.54mm Pitch High Density Connector
|
|
|
- Dominick Logan
- 6 years ago
- Views:
Transcription
1 All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative. 2.54mm Pitch High Density Connector A1 and A2 Series Product Specifications Current rating: 3A Rating Voltage rating: 200V AC Features 1. High Density Mounting Connectors are aligned in the longitudinal direction on the 2.54 mm mesh board, so that no idle space can occur. 2. Variation in Number of Contacts The A1 series contains 16 types of 6 to 64 contacts, while the A2 series contains 20 types of 1 to 20 contacts, 3. Compatibility Operating Temperature Range: -55 to +85ç (Note 1) Operating Moisture Range: 40 to 80% The A1 series is compatible with HIF3B series cable side and HIF3H receptacle for wide applications. Storage Temperature Range: -10 to +60ç (Note 2) Storage Humidity Range: 40 to 70% (Note 2) Item Specification Condition 1. Insulation Resistance 1000M ohms min. 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 650V AC/1 minute 3. Contact Resistance 15m ohms max. 0.1A 4. Vibration No electrical discontinuity of 1μs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5.Humidity (Steady state) Insulation resistance 1000M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% 6. Temperature Cycle No damage, cracks, or parts looseness. (-65ç: 30 minutes 15 to 35ç: 5 minutes max. 125ç: 30 minutes 15 to 35ç: 5 minutes max.) 5 cycles 7. Operating Life Contact resistance: 15m ohms max. 500 cycles 8. Resistance to Soldering heat No deformation of components affecting performance. Solder bath: 260ç for 10 seconds Manual soldering: 350ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Applications Computers, VTR, and other various kinds of electronic equipment Material Part Material Finish Remarks Insulator PBT Black UL94V-0 Pin header Contact area: gold plated Contact Brass DIP area : tin plated Crimping socket Polyamid Black UL94V-0 Crimping contact Phosphor bronze Contact area : gold plated Termination area: nickel plated C2
2 All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website A1 RoHS and search A2 at Series 2.54mm Pitch or contact High Density your Hirose Connector sales representative. Ordering Information K Pin Header A 1-6 P A DS q w e r t y u K Crimping Socket A 1-12 D C q w e r t y q Series Name: A w Series No.:1 (double row) 2 (single row) e Number of contacts: A1...6, 8, 10, 12, 14, 16, 20, 24, 26, 34, 40, 50, 60, 64 A2...1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 r P: Pin header t A: Selective gold plated y Contact pitch : 2.54mm u Contact type: DS : Right angle type DSA : Straight type q Series Name : A w Series No. : 1 (double row) 2 (single row) e Number of contacts: A1 : 8, 10, 12 A2 : 5, 6 r Contact alignment : A1 : D (double row) A2 : S (single row) t Contact pitch : 2.54mm y Connection type: C : crimping K Crimping Contact A SCFC q w e r q Series Name : A w Series No. : 1 e Applicable cable size 2226: AWG#22~ AWG# : AWG#26~ AWG#30 r Packaging type SCFC : Reel SCC : Bag C3
3 All non-rohs A1 products and A2 have Series 2.54mm been discontinued, or will Pitch be discontinued High Density soon. Please Connector check the products status on the Hirose website RoHS search at or contact your Hirose sales representative. A1 (Double Row)- Right Angle Type BPCB mounting pattern Ø B±0.1 Number of Contacts A B RoHS Number of Contacts A B RoHS A1-06PA-2.54DS(71) A1-26PA-2.54DS(71) A1-08PA-2.54DS(71) A1-30PA-2.54DS(71) A1-10PA-2.54DS(71) A1-34PA-2.54DS(71) A1-12PA-2.54DS(71) A1-40PA-2.54DS(71) A1-14PA-2.54DS(71) A1-50PA-2.54DS(71) A1-16PA-2.54DS(71) A1-60PA-2.54DS(71) A1-18PA-2.54DS(71) A1-64PA-2.54DS(71) A1-20PA-2.54DS(71) Note: Right side and left side rib is added for 34pos, or more. C4
4 All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website A1 RoHS and search A2 at Series 2.54mm Pitch or contact High Density your Hirose Connector sales representative. A1 (Double Row)- Straight Type BPCB mounting pattern Ø B±0.1 A1-06PA-2.54DSA(71) A1-08PA-2.54DSA(71) A1-10PA-2.54DSA(71) A1-12PA-2.54DSA(71) A1-14PA-2.54DSA(71) A1-16PA-2.54DSA(71) A1-18PA-2.54DSA(71) A1-20PA-2.54DSA(71) A1-24PA-2.54DSA(71) A1-26PA-2.54DSA(71) A1-30PA-2.54DSA(71) A1-34PA-2.54DSA(71) A1-40PA-2.54DSA(71) A1-50PA-2.54DSA(71) Number of Contacts A B RoHS A1-60PA-2.54DSA(71) A1-64PA-2.54DSA(71) C5
5 All non-rohs A1 products and A2 have Series 2.54mm been discontinued, or will Pitch be discontinued High Density soon. Please Connector check the products status on the Hirose website RoHS search at or contact your Hirose sales representative. A2 (Single Row)-DIP Type K Straight type BPCB mounting pattern K Straight type Ø B±0.1 A2-01PA-2.54DSA(71) A2-02PA-2.54DSA(71) A2-03PA-2.54DSA(71) A2-04PA-2.54DSA(71) A2-05PA-2.54DSA(71) A2-06PA-2.54DSA(71) Number of Contacts A B RoHS K Right angle type K Right angle type A2-01PA-2.54DS(71) A2-02PA-2.54DS(71) A2-03PA-2.54DS(71) A2-04PA-2.54DS(71) A2-05PA-2.54DS(71) A2-06PA-2.54DS(71) Number of Contacts A B RoHS A2-07PA-2.54DSA(71) A2-07PA-2.54DS(71) A2-08PA-2.54DSA(71) A2-08PA-2.54DS(71) A2-09PA-2.54DSA(71) A2-09PA-2.54DS(71) A2-10PA-2.54DSA(71) A2-11PA-2.54DSA(71) A2-10PA-2.54DS(71) A2-11PA-2.54DS(71) A2-12PA-2.54DSA(71) A2-12PA-2.54DS(71) A2-13PA-2.54DSA(71) A2-13PA-2.54DS(71) A2-14PA-2.54DSA(71) A2-14PA-2.54DS(71) A2-15PA-2.54DSA(71) A2-15PA-2.54DS(71) A2-16PA-2.54DSA(71) A2-16PA-2.54DS(71) A2-17PA-2.54DSA(71) A2-17PA-2.54DS(71) A2-18PA-2.54DSA(71) A2-18PA-2.54DS(71) A2-19PA-2.54DSA(71) A2-19PA-2.54DS(71) A2-20PA-2.54DSA(71) A2-20PA-2.54DS(71) C6
6 All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website A1 RoHS and search A2 at Series 2.54mm Pitch or contact High Density your Hirose Connector sales representative. Crimping Socket K Double Row Type K Single Row Type A1-*D-2.54C A1-08D-2.54C A1-10D-2.54C A1-12D-2.54C A B RoHS A2-*S-2.54C A B RoHS A2-5S-2.54C A2-6S-2.54C C7
7 All non-rohs A1 products and A2 have Series 2.54mm been discontinued, or will Pitch be discontinued High Density soon. Please Connector check the products status on the Hirose website RoHS search at or contact your Hirose sales representative. Crimping Contact SCC contact SCFC contact Gold plated area Gold plated area A1-2226SCFC A1-2226SCC A1-2630SCFC A1-2630SCC Polarizing Key HIF3-GPIN(A) Applicable Cable AWG#22 to #26 AWG#26 to #30 Packaging Type Quantity Reel 10,000 Bag 100 Reel 10,000 Bag 100 A B C D E F RoHS Material Remarks Packaging RoHS HIF3-GPIN(A) Poly acetal (white) 5 pieces set 4 sets Crimping Tools Manual crimping tool Crimper unit Applicator Applicable Contact Applicable Cable HIF3-TB2226HC HIF3-TB2630HC CM-105 AP105-A1-2226S AP105-A1-2630S A1-2226SCC A1-2630SCC A1-2226SCFC A1-2630SCFC AWG#22 to #26 AWG#26 to #30 C8
8 Powered by TCPDF ( The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website A1 RoHS and search A2 at Series 2.54mm Pitch or contact High Density your Hirose Connector sales representative. Short Pin Performance Item Rating Value Contact Resistance 30m ohms max. at 0.1A DC Insulation Resistance 1000M ohms min. at 500V DC Current rating 3A HIF3GA-2.54SP RoHS C9
2.54mm Pitch High Density Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
2.54mm Pitch Board to Board Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
2mm Pitch Miniature Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
2mm Pitch Miniature Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
2mm Pitch Miniature Connector
mm Pitch Miniature Connector A A Series Product Specifications Rating Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted
2mm Pitch Miniature Connector
mm Pitch Miniature Connector A A Series Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted in the high density. The
2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be
1.27mm Pitch Two-Piece Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be chosen according to applications,
1.27mm Pitch Two-Piece Connectors
1.7mm Pitch Two-Piece Connectors HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-833) HIF Series (Board direct mount type) Features 1. Product Variation The
1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
1.25mm Pitch Miniature Crimping Connector
1.25mm Pitch Miniature Crimping Connector DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight type)
1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
1.27mm Pitch Two-Piece Connector
1.7mm Pitch Two-Piece Connector HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-83503) HIF Series (Board direct mount type) HIF5 Series 1 (Card edge type)
Ultra-small Rack/Panel Crimp Connectors
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
1mm Pitch Double Rows Low Profile Wire-to-Board Connectors
mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF series Features. Contact Pitch mm contact pitch allows reliable solder and cable termination.. Reliable electrical connection wipe Effective
0.8mm Pitch Stacking Height 5 to 9mm Connector
0.8mm Pitch Stacking Height 5 to 9mm Connector FX6 Series Stacking Height: 5 to 9mm 5~9mm Features 1. Stacking Height 5 to 9mm The board to board stacking height can be set at every millimeter between
0.4 mm Contact Pitch 1.5 mm above the board Board-to-Board /Board-to-FPC Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
1.27mm Pitch Multi-function Two Piece Connector
1.27mm Pitch Multi-function Two Piece Connector FX2 Series Stacking connection (Stack height: 12~16mm) 12mm~16mm Features 1. Various connection with various product line 2. Easy One-Touch Operation Stacking
0.4 mm Pitch, 1.5 mm Board-to-Board Connectors with Dual Shields
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Product Compliant to DIN41612/IEC603-2 Standard
Product ompliant to IN41612/IE603-2 Standard PN Series Pin Header Side Straight through hole type Receptacle Side Straight through hole PN10E- * *P-2.54S PN10E-* *S-2.54S PN10-* *S-2.54S PN10E-* *S-2.54S
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)
![2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)](/thumbs/96/127052325.jpg "2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)")
NEW 2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin) DF59 Series Floating Structure in Three xial Directions (Board-to-Board Structure) X
0.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors
NEW.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors DF23 Series Low profile - 1.5 mm board-to-board distance Board-to-Board Application Plug Board Receptacle Plug Board FPC -.1 1.5 +.2 -.1
1.27mm Pitch Multi-function Two Piece Connector
1.27mm Pitch Multi-function Two Piece Connector FX2 Series Stacking connection (Stack height: 12~16mm) 12mm~16mm Horizontal Connection Vertical Connection 25mm Features 1. Various connection with various
ITS-Z0344 Half Pitch Interface Connectors
All non- product have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
1.25mm Pitch Miniature Crimping Connector
1.mm Pitch Miniature Crimping Connector DF1 Series Type Mounting Type Mounting Height Straight Type DIP SMT.mm.mm Right Angle Type DIP SMT.mm Features 1. Miniature Size Designed in the low profile at mounting
SD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Nov..6 Feb..8 Copyright 8 6 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Withstands higher force of card
minisd TM Card Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
0.4 mm Contact Pitch, Board-to-FPC Connectors
.4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H =.8 mm type) Molded structure Two-point contact system Nov.1.217 Copyright 217 HIROSE ELECTRIC CO., LTD. All Rights
SD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion
7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
NEW 7.9 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits
0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors DF4 Series Decrease in the board-occupied area Smaller width Other HRS connector DF4 3.38mm 5.mm Features 1. Higher density of the board-mounted
Half-pitch and Multi-function Two Piece Connector
Half-pitch and Multi-function Two Piece Connector FX2 Series Stacking connection (Stack height: 12~16mm) 12mm~16mm Horizontal Connection Vertical Connection 25mm Features 1. Various connection with various
Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard
NEW Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard UX60S Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features. USB 2.0 Standard data transmission
13~17 A Compatible, Position Misalignment Absorption Type Power Supply Connector for PCB Connections
13~17 A Compatible, Position Misalignment Absorption Type Power Supply Connector for PCB Connections FX3B Series Example of Connector Mounted Next to Another Connector FX18 Series (without position misalignment
0.6 mm Pitch, Docking Station Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector
0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector DF81 Series Enhanced shielding capability Grounding connection between plug connector and receptacle connector 30 contacts: 5 locations
Micro-Miniature Interface Connectors For Power Supply/Signaling
All non-rohs have been discontinued, or will be discontinued soon. Please check the status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW
Interface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Jan..0 Copyright 0 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Overview The ST Series
Interface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Overview The ST Series interface connectors are specifically designed for use as Input/Output
2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series / DF62W Series Features 1. The slim, sleek design and smooth contour combine to complete connections in tight spaces. These connectors
USB 2.0 Standard Connectors
USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization
Interface Connectors for Miniature, Portable Terminal Devices
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
0.4 mm Pitch, Space-saving Interface Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at your Hirose sales representative. NEW Series Small size.
SIM Card Sockets. ID1 Series. Features. Applications
SIM Card Sockets ID1 Series Miniature and Thin Photograph (1) Features 1. Suited for Plug-in SIM Cards of the GSM Standard (11.11) In Europe, SIM card Subscriber Identity Modules are used for subscriber
Modular Jack Connectors for High-Speed LAN Transmission
Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Dec..207 Copyright 207 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Supports High-Speed LAN Transmission
microsd Card Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Interface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Overview The ST Series interface connectors are specifically designed for use as Input/Output (I/O) connectors on portable information devices.
0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors
0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors FH48 Series Supports the next generation chip V-by-One HS* by THine *High speed serial interface technology for picture
Ultra-Small Surface Mount Coaxial Connectors mm Mated Height
All non- products have been discontinued, or will be discontinued soon. the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW Ultra-Small
USB 2.0 Standard Connectors
USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization
0.5 mm Pitch, 1.2 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Compact Flash Card Connectors
Compact Flash Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design 7. 5.75 Features. Compact design occupies minimum space Connectors are designed with small width
Memory Stick Connectors
Memory Stick Connectors CB1 Series Card Push Insert/Push Eject Card ejection distance of 1 mm Mounting height of mm Mounting area: Smaller design is 78% of former size Outline Receptacle
High Density FPC Connector (0.3mm/0.4mm/0.5mm Pitch)
High Density FPC Connector (0.3mm/0.4mm/0.5mm Pitch) FH16 Series FH16 Series Variation 0.3mm pitch 60 contact 0.3mm pitch 80 contact 0.3mm pitch 90 contact 0.4mm pitch 80 contact 0.5mm pitch 50 contact
0.6 mm Pitch, Docking Station Connectors
mm Pitch, Docking Station Connectors EX0 Series Features 1. Secure electrical and mechanical connection The signal contacts wipe of 1.5 mm and built-in selfalignment assures reliable connection between
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
PC Card Single Slot SMT Connectors for the AV Market (that Support 5 V Cards)
PC Card Single Slot SMT Connectors for the V Market (that Support 5 V Cards) IC15 Series Reliable card ejection 2-point card ejection Card ejection distance 6mm min Equipment outline Stroke: 11.7mm Ejection
1Certified LR R Inner-housing lock. Outer-housing lock
.mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board. mm pitch connector
DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
Modular Jack Connectors for High-Speed LAN Transmission
NEW Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements
Ultra Small Surface Mount Coaxial Connectors 1.4mm Mated Height
NEW Ultra Small Surface Mount Coaxial Connectors 1.4mm Mated Height W.FL Series Further downsizing of FL series in response to the market needs. Occupied Mounting Area.0.0 Features 1. Mounting area of
PC/104, PC/104 Plus Specification
PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch
Ultra Small Surface Mount Coaxial Connectors 1.4mm Mated Height
NEW Ultra Small Surface Mount Coaxial Connectors 1.4mm Mated Height W.FL Series Further downsizing of FL series in response to the market needs. Occupied Mounting Area.0.0 Features 1. Mounting area of
CABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7
CABLE CONNECTOR 2.54mm Pitch Flat Ribbon Cable Connector 6/6/6S/62 SERIES K-7 6/6/6S/62 SERIES 2.5mm PITCH FC CONNECTOR 2.54mm Pitch FC Connector Product Line-up SERIES / FIGURE TYPE CONNECTOR STYLE TERMINATION
6.2mm pitch/disconnectable Crimp style connectors. 1Certified LR R <Inner-housing lock>
6.mm pitch/disconnectable Crimp style connectors a 0 This VL connector is designed for wire-towire and wire-to-board 6.mm pitch connector corresponding to large current. Secondary retainer, which prevents
Meet requirements of USB 2.0
NEW Meet requirements of USB.0 UX Series Features 1. Certified to perform as required in USB.0 Standard Tested and certified by USB Association approved laboratory the connectors will perform at transmission
Modular Jack Connectors for High-Speed LAN Transmission
Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements of TIA/EIA-568-B
QUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
microsd Card Connectors
NEW microsd Card Connectors DM Series Features Common to the entire Series. Extremely small size Small external dimensions and the above-the-board height make the connectors the smallest on the market..
PRODUCT SPECIFICATION
1.25 mm pitch SMT Wire to Board Connector 1 of 7 A 1.0 SCOPE This specification covers performance, tests and quality requirements for 1.25 mm pitch Wire to Board DIP & SMT Type of 10114826~10114831 Series.
SM CONNECTOR. 1Certified LR R Disconnectable Crimp style wire-to-wire connectors. Features. Specifications. Standards. 2.
Crimp.mm (.") pitch SM CONNECTOR Disconnectable Crimp style wire-to-wire connectors Features High contact pressure With each insertion and withdrawal, the mating contacts wipe against each other to remove
ES3 Series (WF2 Type) (culus Certified Product)
COMPONENTS PRODUCT INFORMATION NEW Board-to Cable Connector For LED Lighting Power Supply ES3 Series (WF2 Type) (culus Certified Product) CONNECTOR MB-0227-3 July 2012 RoHS Compliant Receptacle (ES3B002WF2)
microsd Card Connectors
microsd Card Connectors DM Series Jan..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features Common to the entire Series. Extremely small in size Small external dimensions and the above-the-board
2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR J
Emboss Tape.mm pitch/disconnectable Crimp style connectors Radial Tape JST 1 Specifications Current rating: 3 A AC, DC (AWG #) Voltage rating: 0 V AC, DC Temperature range: - C to +8 C (including temperature
QR/P4 SERIES. Small Rectangular Multi-electrode Solderless Connectors for Racks and Panels
QR/P4 SERIES Small Rectangular Multi-electrode Solderless Connectors for Racks and Panels General QR/P4 Series is a series of small connectors for rack and panel application. This is a smaller-size version
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C 2.54mm (.100") Pitch FEATURES AND SPECIFICATIONS Features and Benefits
0.635mm Pitch S.O. DIMM Socket
0.635mm Pitch S.O. DIMM Socket SX1 Series Variation in Mounting Height Low Profile Type (Mounting Height: 4.0mm) Standard Type (Mounting Height: 5.5mm) Features 1. 72pos. Small Outline DIMM Socket SX1
ZH CONNECTOR. 1 Certified LR R Disconnectable Crimp style connectors. Features. Specifications. Standards. 1.5mm
Crimp mm (.059") pitch ZH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features Compact, low profile design The ZH connector requires only about 45% of the installation space required by
AMP Drawer Series Connectors Miniature Power Drawer (MPD) Connectors
Miniature Power Drawer (MPD) Connectors Product Facts High mating cycle life Low Mating and Un-mating force (< 0.2lbs per contact) Single-piece molded housing Molded-in guide pins provide generous blind-mateability
Distributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
CZ FAMILY SERIES/CZ CZW CZH CZHW TZ TZW
CZ FAMILY SERIES/CZCZWCZHCZHWTZTZW 1.5mm pitch/disconnectable Insulation displacement connectors RPZ connector: Receptacle RPZ connector: Plug CZW connector: Header CZ connector: header CZ connector: TZ
USB Type-C Connector. Overview. Features. CX Series. 1. Easy mating due to the reversible form factor
USB Type-C Connector CX Series Overview Note: Please contact us for TID acquisition status of each product. The CX series connector conforms to the next-generation USB standard USB Type-C. It is expected
0.5mm and 1mm Pitch, 2mm Height, FPC/FFC ZIF Connectors
.5mm and mm Pitch, 2mm Height, FPC/FFC ZIF Connectors FH52 Series Secure actuator retention Metal fittings are designed to hold and stabilize the actuator May..27 Copyright 27 HIROSE ELECTRIC CO., LTD.
QR/P8 SERIES. Ultra-small Rectangular Multi-electrode solderless Connectors for Rack and Panel Applications
QR/P8 SERIES Ultra-small Rectangular Multi-electrode solderless Connectors for Rack and Panel Applications General QR/P8 Series is a series of small connectors for rack and panel application. This is a
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
AMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
Mini-Universal MATE-N-LOK 2 Connectors
MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
SEPTEMBER C.CS.1000 / GB
SEPTEMBER 2005 - C.CS.1000 / GB C R I M P F L E X C O N N E C T O R S CRIMPFLEX connectors TECHNICAL DATA MATERIAL Phosphor bronze MALE SOLDER TAB PLATING The standard connector is tin plated (thickness
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
microsd Card Connectors
NEW microsd Card Connectors DM Series Features Common to the entire Series. Extremely small size Small external dimensions and the above-the-board height make the connectors the smallest on the market..
0.2 mm Pitch, 1.2 mm Height, FPC Connector
0.2 mm Pitch,.2 mm Height, FPC Connector FH29 Series Easy mounting with double-sided lead design.2 mm height,.55 mm mounting depth.2mm.55mm Features. Space saving 0.2 mm pitch FPC connector Super thin,
Introduction. Purpose. Introduction to JAE s HDMI Connector, DC* Series
Purpose Introduction Introduction to Objectives Application examples Main features General specifications Materials and finishes Content X pages Learning Time: X mins v1.0 1 JAE DC* Series HDMI Connector
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Power Connectors FEATURES AND SPECIFICATIONS Features and Benefits Positive
CMC Hybrid Connectors Standard and Power Versions
The Molex family of provides a sealed, high-density, modular and cost-effective connection system for heavy-duty, powertrain and body-electronics applications in the transportation industry The CMC connector
XSLS SERIES. Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) KEL CORPORATION
Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) XSLS SERIES KEL CORPORATION KEL CONNECTORS,INC KEL Taiwan Co., Ltd. KEL Shanghai Co.,Ltd. www.kel.jp
PA FAMILY SERIES/PA PAF PAL CONNECTOR
PA FAMILY SERIES/PA PAF PAL CONNECTOR 2.0mm pitch/wire-to-board (Crimp style/idc) / Wire-to-wire (Crimp style/idc) PAF Receptacle (IDC style) PA Shorouded header (Top entry type) PAF Receptacle (IDC style)