GSM-4 (program version 4.02)

Transcription

1 COMMUNICATION MODULE GSM-4 (program version 4.02) PROGRAMMING LIST GDAŃSK, POLAND gsm4list_e 11/03

2 SITE NAME... USER... TELEPHONE NUMBER... PIN...PUK... ADDRESS... NOTES... SERVICE MODE FUNCTIONS The functions are placed in the order corresponding to that of the service mode menu. The way of calling the service mode, as well as entering and/or changing the data in service functions, is described in the user manual for GSM-4 communication module. Total deletion of the control code or a telephone number is effected in much the same way as restoration of the contents of SMS standard message by simultaneously depressing and holding down the CHANGE and NEXT keys. The values set by default or after activation of the Delete all function are shown with a small font at the right lower corner of the data recording field. The options set (selected) by default, distinguished with the Y mark on the display, are indicated in the table with small characters. The contents of standard SMS messages is placed net to the field intended for entering own contents of a message to be sent.

3 2 Communication Module GSM-4 SATEL MAIN MENU: End of service Service code TIMES: T line loss time GSM loss time Time of ringing program: from 01 to 99 OPTIONS: Show tel. line failure [min] Show dialed tel. number 0 2 Signal testing [min] Answering calls 0 2 [sek] GSM for STAM Any numbers OT4 only GSM GSM main line FLASH GSM/TL OUTGOING NUMBERS: Outgoing no 1 Outgoing no 2 Outgoing no 3 Outgoing no 4 PREFIXES: Perm. prefi 1 Perm. prefi 2 Perm. prefi 3 Perm. prefi 4 Prefi to erase Prefi to add

4 Programming List 3 ALLOWED NUMBERS: Tel. No. 1 begin Tel. No. 2 begin Tel. No. 3 begin Tel. No. 4 begin Tel. No. 5 begin Tel. No. 6 begin Tel. No. 7 begin Tel. No. 8 begin Tel. No. 9 begin Tel. No. 10 begin Tel. No. 11 begin Tel. No. 12 begin Tel. No. 13 begin Tel. No. 14 begin Tel. No. 15 begin Tel. No. 16 begin Tel. No. 17 begin Tel. No. 18 begin Tel. No. 19 begin Tel. No. 20 begin Tel. No. 21 begin Tel. No. 22 begin Tel. No. 23 begin Tel. No. 24 begin Tel. No. 25 begin Tel. No. 26 begin

5 4 Communication Module GSM-4 SATEL Tel. No. 27 begin Tel. No. 28 begin Tel. No. 29 begin Tel. No. 30 begin Tel. No. 31 begin Tel. No. 32 begin MESSAGING: Tel.1 for mess. Tel.2 for mess. Tel.3 for mess. Tel.4 for mess. Nr tel. do pow. 1 Nr tel. do pow. 2 Nr tel. do pow. 3 Nr tel. do pow. 4 + for telephone add + before the telephone number Mess. 2 for telephone call twice SMS violat. In. 1 select/deselect chosen [Y] - default setting default: Violation of Input 1 SMS violat. In. 2 default: Violation of Input 2 SMS violat. In. 3 default: Violation of Input 3 SMS violat. In. 4 default: Violation of Input 4

6 Programming List 5 SMS fail. line default: Failure of telephone line SMS restor. In. 1 default: Restoration of Input 1 SMS restor. In. 2 default: Restoration of Input 2 SMS restor. In. 3 fabrycznie: Restoration of Input 3 SMS restor. In. 4 default: Restoration of Input 4 SMS restor. line default: Restoration of telephone line MESSAGING SCOPE: Input 1 violation telephones Input 2 violation telephones Input 3 violation telephones Input 4 violation telephones Line Failure telephones Restore Input 1 telephones Restore Input 2 telephones Restore Input 3 telephones Restore Input 4 telephones Restore Line telephones program: s sending SMS message v voice messaging [none] skip number when messaging Tel.1 Tel.2 Tel.3 Tel.4 Tel.1 Tel.2 Tel.3 Tel.4

7 6 Communication Module GSM-4 SATEL MESSAGING OPTIONS: No spaces Mess. priority Mess. sounds select/deselect [Y] SMS CONTROL: SMS bypass In. 1 SMS bypass In. 2 SMS bypass In. 3 SMS bypass In. 4 SMS bypass all SMS unbypass In. 1 SMS unbypass In. 2 SMS unbypass In. 3 SMS unbypass In. 4 SMS unbypass all SMS bist. OUT1 SMS bist. OUT2 SMS bist. OUT3 SMS mono. OUT1 SMS mono. OUT2 SMS mono. OUT3 SMS off OUT123 SMS on OUT123 SMS check I/O SMS modem format SMS service SMS user

8 Programming List 7 DTMF CONTROL: DTMF bypass In. 1 DTMF bypass In. 2 DTMF bypass In. 3 DTMF bypass In. 4 DTMF bypass all DTMF unbypass In. 1 DTMF unbypass In. 2 DTMF unbypass In. 3 DTMF unbypass In. 4 DTMF unbypass all DTMF check Inputs DTMF bist. OUT1 DTMF bist. OUT2 DTMF bist. OUT3 DTMF mono. OUT1 DTMF mono. OUT2 DTMF mono. OUT3 DTMF off OUT123 DTMF on OUT123 DTMF check Outputs

9 8 Communication Module GSM-4 SATEL INPUTS/OUTPUTS: Input type Input sensitivity Input restore Input bypass # 1 Input bypass # 3 Bypassing input Input 1 Input 2 Input 3 Input dł dł dł dł program: 1 NC; 2 NO ms long (4min); short (4sek) select/deselect [Y] select/deselect [Y] [none] - select one input Time of monostable switch Output 1 Output 2 Output program: od 01 do 99 sekund Input 1 controlling Outpts Input 2 controlling Outpts Input 3 controlling Outpts b m b m b m Input 4 controlling Outpts b m program: b bistable switch of output; m monostable switch of output; bm bistable switch delayed by the time programmed with the Time mono.out.n ; (n=1,2,3 is the output number); [none] the given output not controlled by input GM-47 OPTIONS: SIM needs PIN select/deselect [Y] PIN code PAGER tel. No. CA-64 tel. No.

10 SMS center No. Programming List 9 SMS acknowl. No. Prefi for SMS LCD backlight (available for the modules with backlit display) brak auto stałe Fa/modem Modem format select/deselect [Y] format code modem format select 00 auto V110 ISDN V110 ISDN V110 ISDN V110 ISDN V110 ISDN V110 ISDN V110 ISDN V110 ISDN V110 ISDN V V V V V V V22bis DWNL code RS baud rate 4800 bps 9600 bps Erase settings

11 HISTORY OF THE MANUAL UPDATES Below is a description of changes made in the contents of this manual as compared with that drawn up for the GSM-4 module with program version v4.00. DATE November 2003 PROGRAM VERSION DESCRIPTION OF CHANGES New option that concerns the possibility of using the module as a fa and a modem has been added (s. 9). SATEL sp. z o.o. ul. Schuberta Gdańsk POLAND Tel info@satel.pl