IDT54/74FCT373T/AT/CT
|
|
- Debra Armstrong
- 5 years ago
- Views:
Transcription
1 IT54/74FCT373T/AT/CT FAST CMS CTAL TRANSPARENT LATCH FAST CMS CTAL TRANSPARENT LATCH MILITARY AN INUSTRIAL TEMPERATURE RANES IT54/74FCT373T/AT/CT FEATURES: Std., A, and C grades Low input and output leakage 1µA (max.) CMS power levels True TTL input and output compatibility: VH = 3. (typ.) VL = 0. (typ.) High rive outputs (-15mA IH, 48mA IL) Meets or exceeds JEEC standard 18 specifications Military product compliant to MIL-ST-883, Class B and ESC listed (dual marked) Power off disable outputs permit "live insertion" Available in the following packages: Industrial: SIC, SSP, QSP Military: CERIP, LCC ESCRIPTIN: The FCT373Tis an octal transparent latch built using an advanced dual metal CMS technology. These octal latches have 3-state outputs and are intended for bus oriented applications. The flip-flops appear transparent to the data when Latch Enable () is high. When is low, the data that meets the set-up time is latched. ata appears on the bus when the utput Enable (E) is low. When E is high, the bus output is in the high-impedance state. FUNCTINAL BLCK IARAM E The IT logo is a registered trademark of Integrated evice Technology, Inc. MILITARY AN INUSTRIAL TEMPERATURE RANES 1 CTBER Integrated evice Technology, Inc. SC-5496/5
2 IT54/74FCT373T/AT/CT FAST CMS CTAL TRANSPARENT LATCH MILITARY AN INUSTRIAL TEMPERATURE RANES PIN CNFIURATIN E VCC 7 INEX 0 0 E VCC N N 4 4 CERIP/ SIC/ SSP/ QSP TP VIEW LCC TP VIEW ABSLUTE MAXIMUM RATINS (1) Symbol escription Max Unit VTERM (2) Terminal Voltage with Respect to N 0.5 to +7 V VTERM (3) Terminal Voltage with Respect to N 0.5 to VCC+0.5 V TST Storage Temperature 65 to +150 C IUT C utput Current 60 to +120 ma NTES: 1. Stresses greater than those listed under ABSLUTE MAXIMUM RATINS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. No terminal voltage may exceed Vcc by +0.5V unless otherwise noted. 2. Inputs and Vcc terminals only. 3. utput and I/ terminals only. CAPACITANCE (TA = +25 C, F = 1.0MHz) Symbol Parameter (1) Conditions Typ. Max. Unit CIN Input Capacitance VIN = 6 10 pf CUT utput Capacitance VUT = 8 12 pf PIN ESCRIPTIN Pin Names escription x ata Inputs Latch Enable Input (Active HIH) E utput Enable Input (Active LW) x 3-State utputs FUNCTIN TAB (1) Inputs utputs x E x H H L H L H L L X X H Z NTE: 1. H = HIH Voltage Level X = on t Care L = LW Voltage Level Z = High Impedance NTE: 1. This parameter is measured at characterization but not tested. 2
3 IT54/74FCT373T/AT/CT FAST CMS CTAL TRANSPARENT LATCH MILITARY AN INUSTRIAL TEMPERATURE RANES C ECTRICAL CHARACTERISTICS VER PERATIN RANE Following Conditions Apply Unless therwise Specified: Industrial: TA = 40 C to +85 C, VCC = 5. ±5%; Military: TA = 55 C to +125 C, VCC = 5. ±10% Symbol Parameter Test Conditions (1) Min. Typ. (2) Max. Unit VIH Input HIH Level uaranteed Logic HIH Level 2 V VIL Input LW Level uaranteed Logic LW Level 0.8 V IIH Input HIH Current (4) VCC = Max. VI = 2.7V ±1 µa IIL Input LW Current (4) VCC = Max. VI = 0.5V ±1 µa IZH High Impedance utput Current VCC = Max V = 2.7V ±1 µa IZL (3-State output pins) (4) V = 0.5V ±1 II Input HIH Current (4) VCC = Max., VI = VCC (Max.) ±1 µa VIK Clamp iode Voltage VCC = Min, IIN = -18mA V VH Input Hysteresis 200 mv ICC Quiescent Power Supply Current VCC = Max., VIN = N or VCC ma UTPUT RIVE CHARACTERISTICS Symbol Parameter Test Conditions (1) Min. Typ. (2) Max. Unit VH utput HIH Voltage VCC = Min IH = 6mA MIL VIN = VIH or VIL IH = 8mA IN V IH = 12mA MIL 2 3 IH = 15mA IN VL utput LW Voltage VCC = Min IL = 32mA MIL V VIN = VIH or VIL IL = 48mA IN IS Short Circuit Current VCC = Max., V = N (3) ma IFF Input/utput Power ff Leakage (5) VCC =, VIN or V 4.5V ±1 µa NTES: 1. For conditions shown as Min. or Max., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC = 5., +25 C ambient. 3. Not more than one output should be tested at one time. uration of the test should not exceed one second. 4. The test limit for this parameter is ±5µA at TA = 55 C. 5. This parameter is guaranteed but not tested. 3
4 IT54/74FCT373T/AT/CT FAST CMS CTAL TRANSPARENT LATCH MILITARY AN INUSTRIAL TEMPERATURE RANES PWER SUPPLY CHARACTERISTICS Symbol Parameter Test Conditions (1) Min. Typ. (2) Max. Unit ΔICC Quiescent Power Supply Current VCC = Max ma TTL Inputs HIH VIN = 3.4V (3) ICC ynamic Power Supply VCC = Max. VIN = VCC ma/ Current (4) utputs pen VIN = N MHz E = N ne Input Toggling 50% uty Cycle IC Total Power Supply Current (6) VCC = Max. VIN = VCC ma utputs pen VIN = N fi = 10MHz 50% uty Cycle VIN = 3.4V E = N VIN = N = VCC ne Bit Toggling VCC = Max. VIN = VCC 3 6 (5) ma utputs pen VIN = N fi = 2.5MHz 50% uty Cycle VIN = 3.4V 5 14 (5) E = N VIN = N = VCC Eight Bits Toggling NTES: 1. For conditions shown as Min. or Max., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC = 5., +25 C ambient. 3. Per TTL driven input; (VIN = 3.4V). All other inputs at VCC or N. 4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations. 5. Values for these conditions are examples of ΔICC formula. These limits are guaranteed but not tested. 6. IC = IQUIESCENT + IINPUTS + IYNAMIC IC = ICC + ΔICC HNT + ICC (fcp/2+ fini) ICC = Quiescent Current ΔICC = Power Supply Current for a TTL High Input (VIN = 3.4V) H = uty Cycle for TTL Inputs High NT = Number of TTL Inputs at H ICC = ynamic Current caused by an Input Transition Pair (HLH or LHL) fcp = Clock Frequency for Register evices (Zero for Non-Register evices) fi = utput Frequency Ni = Number of utputs at fi All currents are in milliamps and all frequencies are in megahertz. 4
5 IT54/74FCT373T/AT/CT FAST CMS CTAL TRANSPARENT LATCH MILITARY AN INUSTRIAL TEMPERATURE RANES SWITCHIN CHARACTERISTICS VER PERATIN RANE - INUSTRIAL 74FCT373AT 74FCT373CT Symbol Parameter Condition (1) Min. (2) Max. Min. (2) Max. Unit tplh Propagation elay CL = 50pF ns tphl x to x RL = 500Ω tplh Propagation elay ns tphl to x tpzh utput Enable Time ns tpzl tphz utput isable Time ns tplz tsu Set-up Time HIH or LW, x to 2 2 ns th Hold Time HIH or LW, x to ns tw Pulse Width HIH (3) 5 5 ns SWITCHIN CHARACTERISTICS VER PERATIN RANE - MILITARY 54FCT373T 54FCT373AT 54FCT373CT Symbol Parameter Condition (1) Min. (2) Max. Min. (2) Max. Min. (2) Max. Unit tplh Propagation elay CL = 50pF ns tphl x to x RL = 500Ω tplh Propagation elay ns tphl to x tpzh utput Enable Time ns tpzl tphz utput isable Time ns tplz tsu Set-up Time HIH or LW, x to ns th Hold Time HIH or LW, x to ns tw Pulse Width HIH (3) ns NTES: 1. See test circuit and waveforms. 2. Minimum limits are guaranteed but not tested on Propagation elays. 3. This parameter is guaranteed but not tested. 5
6 IT54/74FCT373T/AT/CT FAST CMS CTAL TRANSPARENT LATCH MILITARY AN INUSTRIAL TEMPERATURE RANES TEST CIRCUITS AN WAVEFRMS V CC 7. SWITCH PSITIN Pulse enerator VIN R T.U.T. VUT 50pF C L 500W 500W Test pen rain isable Low Enable Low All ther Tests Switch Closed pen EFINITINS: CL = Load capacitance: includes jig and probe capacitance. RT = Termination resistance: should be equal to ZUT of the Pulse enerator. ctal Link Test Circuits for All utputs ATA INPUT TIMIN INPUT ASYNCHRNUS CNTRL PRESET CAR ETC. SYNCHRNUS CNTRL PRESET CAR CLCK ENAB ETC. tsu tsu trem th th Set-Up, Hold, and Release Times ctal Link LW-HIH-LW PULSE HIH-LW-HIH PULSE tw Pulse Width ctal Link SAME PHASE INPUT TRANSITIN UTPUT PPSITE PHASE INPUT TRANSITIN tplh tplh Propagation elay tphl tphl VH VL ctal Link CNTRL INPUT UTPUT NRMALLY LW UTPUT NRMALLY HIH ENAB tpzl SWITCH CLSE tpzh SWITCH PEN 3.5V tphz ISAB tplz Enable and isable Times V VL VH ctal Link NTES: 1. iagram shown for input Control Enable-LW and input Control isable-hih. 2. Pulse enerator for All Pulses: Rate 1.0MHz; tf 2.5ns; tr 2.5ns. 6
7 IT54/74FCT373T/AT/CT FAST CMS CTAL TRANSPARENT LATCH MILITARY AN INUSTRIAL TEMPERATURE RANES RERIN INFRMATIN XX FCT Temp. Range XXXX evice Type XX Package X Process Blank B Industrial MIL-ST-883, Class B S S PY PY Q Q L Industrial ptions Small utline IC SIC - reen Shrink Small utline Package SSP - reen Quarter-size Small utline Package QSP - reen Military ptions CERIP Leadless Chip Carrier 373T 373AT 373CT Fast CMS ctal Transparent Latch C to +125 C 40 C to +85 C CRPRATE HEAQUARTERS for SAS: for Tech Support: 6024 Silver Creek Valley Road or logichelp@idt.com San Jose, CA fax:
PI74FCT373T PI74FCT573T Octal Transparent Latches
ctal Transparent Latches Fast CMS ctal Transparent Latches Features: PI74FCT373/573T are pin compatible with bipolar FAST Series at a higher speed and lower power consumption TTL input and output levels
More informationDatasheetArchive.com. Request For Quotation
atasheetarchive.com Request For uotation Order the parts you need from our real-time inventory database. Simply complete a request for quotation form with your part information and a sales representative
More informationFAST CMOS OCTAL BUFFER/LINE DRIVER
FAST CMOS OCTAL BUFFER/LINE DRIVER IDT54/74FCT244T/AT/CT FEATURES: Std., A, and C grades Low input and output leakage 1µA (max.) CMOS power levels True TTL input and output compatibility: VOH = 3. (typ.)
More informationIDT74FCT299/A/C FAST CMOS 8-INPUT UNIVERSAL SHIFT REGISTER DESCRIPTION: FUNCTIONAL BLOCK DIAGRAM
IT74FCT299 A/C FAST CMOS 8-INPUT UNIVERSAL SHIFT REGISTER IT74FCT299/A/C FEATURES: IT74FCT299 equivalent to FAST speed and drive I74FCT299A 25% faster than FAST IT74FCT299C 35% faster than FAST Equivalent
More information3.3V CMOS OCTAL BIDIRECTIONAL TRANSCEIVER
. CMOS OCTAL IDIRECTIONAL TRANSCEIVER. CMOS OCTAL IDIRECTIONAL TRANSCEIVER IDT7FCT/A FEATURES: 0. MICRON CMOS Technology ESD > 00 per MIL-STD-, Method 0; > 0 using machine model (C = 00pF, R = 0) VCC =.
More informationFAST CMOS OCTAL BUFFER/LINE DRIVER
FAST CMOS OCTAL BUFFER/LINE DRIVER IDT74FCT240A/C FEATURES: IDT74FCT240A 25% faster than FAST IDT74FCT240C up to 55% faster than FAST 64mA IOL CMOS power levels (1mW typ. static) Meets or exceeds JEDEC
More informationIDT54/74FCT244/A/C FAST CMOS OCTAL BUFFER/LINE DRIVER DESCRIPTION: FUNCTIONAL BLOCK DIAGRAM FEATURES: OEA OEB DA1 OA1 DB1 OB1 DA2 OA2 OB2 DB2 DA3 OA3
FAST CMOS OCTAL BUFFER/LINE DRIVER IDT/7FCT/A/C FEATURES: IDT/7FCTA equivalent to FAST speed and drive IDT/7FCTA % faster than FAST IDT/7FCTC up to % faster than FAST IOL = ma (commercial) and 8mA (military)
More informationIDT54/74FCT541/A/C FAST CMOS OCTAL BUFFER/LINE DRIVER DESCRIPTION: FUNCTIONAL BLOCK DIAGRAM
FAST CMOS OCTAL BUFFER/LINE DRIVER IDT/7FCT/A/C FEATURES: IDT/7FCT equivalent to FAST speed and drive IDT/7FCTA % faster than FAST IDT/7FCTC up to % faster than FAST IOL = ma (commercial) and 8mA (military)
More informationIDT74FST BIT 2:1 MUX/DEMUX SWITCH
16-BIT 2:1 MUX/DEMUX SWITCH IDT74FST163233 FEATURES: Bus switches provide zero delay paths Low switch on-resistance TTL-compatible input and output levels ESD > 200 per MIL-STD-883, Method 3015; > 20 using
More informationFAST CMOS SYNCHRONOUS PRESETTABLE BINARY COUNTERS
Integrated Device Technology, Inc. FAST CMOS SYNCHRONOUS PRESETTABLE BINARY COUNTERS IDT54/74FCT161/A/C IDT54/74FCT163/A/C FEATURES: IDT54/74FCT161/163 equivalent to FAST speed IDT54/74FCT161A/163A 35%
More informationIDT74LVC245A 3.3V CMOS OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS AND 5 VOLT TOLERANT I/O
3.3V CMOS OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS AND 5 T TOLERANT I/O IDT74LVC245A FEATURES: 0.5 MICRON CMOS Technology ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C = 200pF,
More information3.3V CMOS 1-TO-5 CLOCK DRIVER
3. CMOS 1-TO-5 CLOCK DRIVER 3. CMOS 1-TO-5 CLOCK DRIVER IDT74FCT38075 FEATURES: Advanced CMOS Technology Guaranteed low skew < 100ps (max.) Very low duty cycle distortion< 250ps (max.) High speed propagation
More information3.3V CMOS BUFFER/CLOCK DRIVER
3. CMOS BUFFER/CLOCK DRIVER 3. CMOS BUFFER/CLOCK DRIVER IDT49FCT380/A FEATURES: 0. MICRON CMOS Technology Guaranteed low skew < 00ps (max.) Very low duty cycle distortion < 1.0ns (max.) Very low CMOS power
More informationIDT74LVC541A 3.3V CMOS OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS AND 5 VOLT TOLERANT I/O
3.3V CMOS OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS AND 5 T TOLERANT I/O IDT74LVC541A FEATURES: 0.5 MICRON CMOS Technology ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C = 200pF, R
More informationIDT74LVC244A 3.3V CMOS OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS, 5 VOLT TOLERANT I/O
3.3V CMOS OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS, 5 T TOLERANT I/O IDT74LVC244A FEATURES: 0.5 MICRON CMOS Technology ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C = 200pF, R = 0)
More information3.3V CMOS HEX BUFFER/DRIVER WITH OPEN-DRAIN OUTPUTS AND 5 VOLT TOLERANT I/O
3.3V CMOS HEX BUFFER/DRIVER WITH OPEN-DRAIN S AND 5 T TOLERANT I/O IDT74LVC07A FEATURES: 0.5 MICRON CMOS Technology ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C = 200pF, R = 0) VCC
More informationIDT74CBTLV3257 LOW-VOLTAGE QUAD 2:1MUX/DEMUX BUS SWITCH
LOW-VOLTAGE QUAD 2:1 MUX/DEMUX BUS ITCH LOW-VOLTAGE QUAD 2:1MUX/DEMUX BUS ITCH IDT74CBTLV3257 FEATURES: Functionally equivalent to QS3257 5Ω switch connection between two ports Isolation under power-off
More informationLOW-VOLTAGE 24-BIT BUS EXCHANGE SWITCH
LOW-VOLTAGE 4-BIT BUS EXCHANGE ITCH LOW-VOLTAGE 4-BIT BUS EXCHANGE ITCH IDT74CBTLV6 FEATURES: 5Ω A/B bi-directional switch Isolation Under Power-Off Conditions Over-voltage tolerant Latch-up performance
More informationLOW-VOLTAGE OCTAL BUS SWITCH
LOW-VOLTAGE OCTAL BUS ITCH IDT74CBTLV44 FEATURES: Pin-out compatible with standard '44 Logic products 5Ω A/B bi-directional switch Isolation under power-off conditions Over-voltage tolerant Latch-up performance
More informationLOW-VOLTAGE 10-BIT BUS SWITCH
LOW-VOLTAGE 0-BIT BUS ITCH IDT74CBTLV84 FEATURES: 5Ω A/B bi-directional bus switch Isolation under power-off conditions Over-voltage tolerant Latch-up performance exceeds 00mA VCC =.V -.6V, Normal Range
More informationIDT74LVCH16373A TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS, 5 VOLT TOLERANT I/O AND BUS-HOLD
3.3V CMOS 16-BIT IDT74LVCH16373A TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS, 5 T TOLERANT I/O AND BUS-HOLD FEATURES: Typical tsk(0) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20
More informationQUICKSWITCH PRODUCTS HIGH-SPEED CMOS 10-BIT BUS SWITCH WITH FLOW-THROUGH PINOUT
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS 10-BIT BUS SWITCH WITH FLOW-THROUGH PINOUT IDTQS361 FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs
More information3.3 Volt CMOS Bus Interface 8-Bit Latches
Q 3.3 Volt CMOS Bus Interface 8-Bit Latches QS74FCT3373 QS74FCT32373 FEATURES/BENEFITS Pin and function compatible to the 74F373 JEDEC spec compatible 74LVT373 and 74FCT373T IOL = 24 ma Com. Available
More informationQUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUADRUPLE BUS SWITCH WITH INDIVIDUAL ACTIVE LOW ENABLES
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUADRUPLE BUS SWITCH WITH INDIVIDUAL ACTIVE LOW ENABLES IDTQS315 FEATURES: Enhanced N channel FET with no inherent diode to Vcc Pin compatible with the 74 15 function
More informationQUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH DOUBLE-WIDTH BUS SWITCH
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH DOUBLE-WIDTH BUS SWITCH IDTQS32X245 FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs Dual
More informationQUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH DOUBLE-WIDTH BUS SWITCH
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH DOUBLE-WIDTH BUS SWITCH IDTQS32X2245 FEATURES: Enhanced N channel FET with no inherent diode to Vcc Dual '245 function 25Ω resistor for low noise Low propagation
More informationQUICKSWITCH PRODUCTS 2.5V / 3.3V 20-BIT DUAL PORT, HIGH BANDWIDTH BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V / 3.3V 20-BIT DUAL PORT, HIGH BANDWIDTH BUS SWITCH IDTQS3VH1662 FEATURES: N channel FET switches with no parasitic diode to Vcc Isolation under power-off conditions No DC path
More informationQUICKSWITCH PRODUCTS 2.5V / 3.3V 24-BIT HIGH BANDWIDTH BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V / 3.3V 24-BIT HIGH BANDWIDTH BUS SWITCH FEATURES: N channel FET switches with no parasitic diode to Vcc Isolation under power-off conditions No DC path to Vcc or 5V tolerant in
More informationQUICKSWITCH PRODUCTS HIGH-SPEED CMOS 10-BIT BUS SWITCH
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS 10-BIT BUS SWITCH IDTQS338 FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs Zero propagation delay,
More informationQUICKSWITCH PRODUCTS 2.5V / 3.3V 8-BIT HIGH BANDWIDTH BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V / 3.3V -BIT HIGH BANDWIDTH BUS SWITCH IDTQS3VH244 FEATURES: N channel FET switches with no parasitic diode to VCC Isolation under power-off conditions No DC path to VCC or GND
More informationQUICKSWITCH PRODUCTS 2.5V / 3.3V 32-BIT HIGH BANDWIDTH BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V / 3.3V 32-BIT HIGH BANDWIDTH BUS SWITCH IDTQS3XVH25 FEATURES: N channel FET switches with no parasitic diode to VCC Isolation under power-off conditions No DC path to VCC or 5V
More informationQUICKSWITCH PRODUCTS 2.5V / 3.3V 16-BIT HIGH BANDWIDTH BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V / 3.3V 16-BIT HIGH BANDWIDTH BUS SWITCH IDTQS32XVH245 FEATURES: N channel FET switches with no parasitic diode to VCC Isolation under power-off conditions No DC path to VCC or
More informationIDTQS3VH383 QUICKSWITCH PRODUCTS 2.5V/3.3V 8-BIT HIGH BANDWIDTH BUS EXCHANGE BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V/3.3V 8-BIT HIGH BANDWIDTH BUS EXCHANGE BUS SWITCH IDTQS3VH383 FEATURES: N channel FET switches with no parasitic diode to Vcc Isolation under power-off conditions No DC path to
More informationSN54ALS20A, SN54AS20, SN74ALS20A, SN74AS20 DUAL 4-INPUT POSITIVE-NAND GATES
Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs description These devices contain two independent -input positive-nand
More informationQUICKSWITCH PRODUCTS 2.5V/3.3V 20-BIT HIGH BANDWIDTH BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V/3.3V 20-BIT HIGH BANDWIDTH BUS SWITCH IDTQS32XVH34 FEATURES: N channel FET switches with no parasitic diode to VCC Isolation under power-off conditions No DC path to VCC or GND
More informationIDTQS3257 QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH QUAD 2:1 MUX/DEMUX DESCRIPTION: FUNCTIONAL BLOCK DIAGRAM FEATURES: APPLICATIONS:
HIGH-SPEED CMOS QUICKSWITCH QUAD :1 MUX/DEMUX FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs Pin compatible with the 7F57, 7FCT57, and
More informationQUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH 32-BIT MULTIWIDTH BUS SWITCHES
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH 3-BIT MULTIWIDTH BUS SWITCHES IDTQS3X5 FEATURES: Enhanced N channel FET with no inherent diode to Vcc Bidirectional switches connect inputs to outputs Zero
More informationQUICKSWITCH PRODUCTS 2.5V / 3.3V 8:1 MUX / DEMUX HIGH BANDWIDTH BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V / 3.3V 8:1 MUX / DEMUX HIGH BANDWIDTH BUS SWITCH IDTQS3VH251 FEATURES: N channel FET switches with no parasitic diode to VCC Isolation under power-off conditions No DC path to
More informationQUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH QUAD 2:1 MUX/DEMUX
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH QUAD :1 MUX/DEMUX IDTQS357 FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs Pin compatible
More informationLOW SKEW CMOS PLL CLOCK DRIVER WITH INTEGRATED LOOP FILTER
S597T LOW SKEW CMOS PLL CLOCK IVE WITH INTEGATE LOOP FILTE LOW SKEW CMOS PLL CLOCK IVE WITH INTEGATE LOOP FILTE S597T FEATUES: 5V operation 2x output, /2 output, output Outputs tri-state while ST low Internal
More informationQUICKSWITCH PRODUCTS 2.5V / 3.3V QUAD ACTIVE LOW, HIGH BANDWIDTH BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V / 3.3V QUAD ACTIVE LOW, HIGH BANDWIDTH BUS SWITCH IDTQS3VH125 FEATURES: N channel FET switches with no parasitic diode to VCC Isolation under power-off conditions No DC path to
More informationSN54ALS573C, SN54AS573A, SN74ALS573C, SN74AS573A OCTAL D-TYPE TRANSPARENT LATCHES WITH 3-STATE OUTPUTS
-State Buffer-Type Outputs Drive Bus Lines Directly Bus-Structured Pinout True Logic Outputs Package Optio Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), Standard Plastic (N)
More informationSN54ALS04B, SN54AS04, SN74ALS04B, SN74AS04 HEX INVERTERS
SNLS0B, SNS0, SN7LS0B, SN7S0 Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description These devices contain
More informationSN54ALS32, SN54AS32, SN74ALS32, SN74AS32 QUADRUPLE 2-INPUT POSITIVE-OR GATES
Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description These devices contain four independent -input positive-or
More informationSN54ALS04B, SN54AS04, SN74ALS04B, SN74AS04 HEX INVERTERS
SNALS0B, SNAS0, SN7ALS0B, SN7AS0 Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description These devices contain
More informationSN54ALS645A, SN54AS645, SN74ALS645A, SN74AS645 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
Bidirectional Bus Traceivers in High-Deity 0-Pin Packages True Logic 3-State Outputs Package Optio Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and
More informationSN74ALS533A, SN74AS533A OCTAL D-TYPE TRANSPARENT LATCHES WITH 3-STATE OUTPUTS SDAS270 DECEMBER 1994
Eight Latches in a Single Package -State Bus-Driving Inverting Outputs Full Parallel Access for Loading Buffered Control Inputs pnp Inputs Reduce dc Loading on Data Lines Package Optio Include Plastic
More informationSN54LVTH16240, SN74LVTH V ABT 16-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
Members of the Texas Instruments Widebus Family State-of-the-Art Advanced BiCMOS Technology (ABT) Design for 3.3-V Operation and Low Static-Power Dissipation Support Mixed-Mode Signal Operation (5-V Input
More informationSN54ALS880A, SN54AS880, SN74ALS880A, SN74AS880 DUAL 4-BIT D-TYPE LATCHES WITH 3-STATE OUTPUTS
N54AL880A, N54A880, N74AL880A, N74A880 DUAL 4-BIT D-TYPE LATCHE WITH 3-TATE OUTPUT DA079A D21, DECEMBER 1982 REVIED MAY 198 3-tate Buffer-Type Outputs Drive Bus Lines Directly Bus-tructured Pinout AL873B
More information74AC11240 OCTAL BUFFER/LINE DRIVER WITH 3-STATE OUTPUTS
Flow-Through Architecture Optimizes PCB Layout Center-Pin V CC and Configuratio Minimize High-Speed Switching Noise EPIC (Enhanced-Performance Implanted CMOS) -m Process 500-mA Typical Latch-Up Immunity
More informationSN54LVTH16374, SN74LVTH V ABT 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
Members of the Texas Instruments Widebus Family State-of-the-Art Advanced BiCMOS Technology (ABT) Design for 3.3-V Operation and Low Static-Power Dissipation Support Mixed-Mode Signal Operation (5-V Input
More informationCMOS SyncFIFO 64 x 8, 256 x 8, 512 x 8, 1,024 x 8, 2,048 x 8 and 4,096 x 8 LEAD FINISH (SnPb) ARE IN EOL PROCESS - LAST TIME BUY EXPIRES JUNE 15, 2018
CMOS SyncFIFO 64 x 8, 256 x 8, 512 x 8, 1,024 x 8, 2,048 x 8 and 4,096 x 8 LEAD FINISH (SnPb) ARE IN EOL PROCESS - LAST TIME BUY EXPIRES JUNE 15, 2018 IDT72420 IDT72200 IDT72210 IDT72220 IDT72230 IDT72240
More informationCMOS SyncFIFO 64 X 9, 256 x 9, 512 x 9, 1024 X 9, 2048 X 9 and 4096 x 9
Integrated evice Technology, Inc. CMOS SyncFIFO 64 X 9, 256 x 9, 512 x 9, 124 X 9, 248 X 9 and 496 x 9 IT72421 IT7221 IT72211 IT72221 IT72231 IT72241 FEATURES: 64 x 9-bit organization (IT72421) 256 x 9-bit
More information3.3V ZERO DELAY CLOCK BUFFER
3.3V ZERO DELAY CLOCK BUFFER IDT2309A FEATURES: Phase-Lock Loop Clock Distribution 10MHz to 133MHz operating frequency Distributes one clock input to one bank of five and one bank of four outputs Separate
More informationCMOS Static RAM 1 Meg (128K x 8-Bit) Revolutionary Pinout
CMOS Static RAM 1 Meg (K x -Bit) Revolutionary Pinout IDT714 Features K x advanced high-speed CMOS static RAM JEDEC revolutionary pinout (center power/gnd) for reduced noise Equal access and cycle times
More informationSN54BCT760, SN74BCT760 OCTAL BUFFERS/DRIVERS WITH OPEN-COLLECTOR OUTPUTS
SNBCT0, SNBCT0 SCBS0B JULY REVISED NOVEMBER Open-Collector Version of BCT Open-Collector Outputs Drive Bus Lines or Buffer Memory Address Registers ESD Protection Exceeds 000 V Per MIL-STD-C Method 0 Packages
More informationCMOS SyncFIFO 64 X 9, 256 x 9, 512 x 9, 1,024 X 9, 2,048 X 9, 4,096 x 9 and 8,192 x 9
Integrated Device Technology, Inc. CMOS SyncFIFO 64 X 9, 256 x 9, 512 x 9, 1,24 X 9, 2,48 X 9, 4,96 x 9 and 8,192 x 9 IDT72421 IDT7221 IDT72211 IDT72221 IDT72231 IDT72241 IDT72251 FEATURES: 64 x 9-bit
More informationIDT71016S/NS. CMOS Static RAM 1 Meg (64K x 16-Bit)
CMOS Static RAM 1 Meg (4K x 1-Bit) IDT711S/NS Features 4K x 1 advanced high-speed CMOS Static RAM Equal access and cycle times Commercial and Industrial: //2 One Chip Select plus one Output Enable pin
More informationPAL22V10 Family, AmPAL22V10/A
FINAL COM L: -7//5 PAL22V Family, AmPAL22V/A 24-Pin TTL Versatile PAL Device Advanced Micro Devices DISTINCTIVE CHARACTERISTICS As fast as 7.5-ns propagation delay and 9 MHz fmax (external) Macrocells
More information2.5 V/3.3 V, 1-Bit, 2-Port Level Translator Bus Switch in SOT-66 ADG3241
2. V/3.3 V, -Bit, 2-Port Level Translator Bus Switch in SOT-66 ADG324 FEATURES FUNCTIONAL BLOCK DIAGRAM 22 ps propagation delay through the switch A B 4. Ω switch connection between ports Data rate. Gbps
More informationD0 - D8 INPUT REGISTER. RAM ARRAY 64 x 9, 256 x 9, 512 x 9, 1,024 x 9, 2,048 x 9, 4,096 x 9, 8,192 x 9 OUTPUT REGISTER RESET LOGIC RCLK REN1
CMOS SyncFIFO 64 x 9, 256 x 9, 512 x 9, 1,24 x 9, 2,48 x 9, 4,96 x 9 and 8,192 x 9 LEAD FINISH (SnPb) ARE IN EOL PROCESS - LAST TIME BUY EXPIRES JUNE 15, 218 FEATURES: 64 x 9-bit organization (IDT72421)
More informationMC1488, SN55188, SN75188 QUADRUPLE LINE DRIVERS
Meet or Exceed the Requirements of ANSI EIA/ TIA--E and ITU Recommendation V. Designed to Be Interchangeable With Motorola MC1 Current-Limited Output: ma Typical Power-Off Output Impedance: Ω Minimum Slew
More informationLP62S16256G-I Series. Document Title 256K X 16 BIT LOW VOLTAGE CMOS SRAM. Revision History. Rev. No. History Issue Date Remark
Preliminary 256K X 16 BIT LOW VOLTAGE CMOS SRAM ocument Title 256K X 16 BIT LOW VOLTAGE CMOS SRAM Revision History Rev. No. History Issue ate Remark 0.0 Initial issue June 2, 2006 Preliminary PRELIMINARY
More informationIDT71V124SA/HSA. 3.3V CMOS Static RAM 1 Meg (128K x 8-Bit) Center Power & Ground Pinout
33V CMOS Static RAM 1 Meg (K x -Bit) Center Power & Ground Pinout IDT71VSA/HSA Features K x advanced high-speed CMOS static RAM JEDEC revolutionary pinout (center power/gnd) for reduced noise Equal access
More informationSEMICONDUCTOR TECHNICAL DATA
SEICONDUCTOR TECHNICAL DATA Ω The is designed for asynchronous communication between data buses. The device tramits data from the A bus to the B bus or from the B bus to the A bus depending upon the logic
More information2.5 V/3.3 V, 2-Bit Common Control Level Translator Bus Switch ADG3242
2.5 V/3.3 V, 2-Bit Common Control Level Translator Bus Switch ADG3242 FEATURES 225 ps propagation delay through the switch 4.5 Ω switch connection between ports Data rate 1.5 Gbps 2.5 V/3.3 V supply operation
More informationCMOS PARALLEL-TO-SERIAL FIFO 1,024 x 16
CMOS PARALLEL-TO-SERIAL FIFO IDT72125 FEATURES: 25ns parallel port access time, 35ns cycle time 50MHz serial shift frequency ide x16 organization offering easy expansion Low power consumption (50mA typical)
More informationSN54F38, SN74F38 QUADRUPLE 2-INPUT POSITIVE-NAND BUFFERS WITH OPEN-COLLECTOR OUTPUTS
SNF, SN7F SDFS0A MARCH 7 REVISED OCTOBER Package Options Include Plastic Small-Outline Packages, Ceramic Chip Carriers, and Standard Plastic and Ceramic 00-mil DIPs description These devices contain four
More informationAT28C16. 16K (2K x 8) CMOS E 2 PROM. Features. Description. Pin Configurations
Features Fast Read Access Time - 150 ns Fast Byte Write - 200 µs or 1 ms Self-Timed Byte Write Cycle Internal Address and Data Latches Internal Control Timer Automatic Clear Before Write Direct Microprocessor
More informationAT28C K (32K x 8) Paged CMOS E 2 PROM. Features. Description. Pin Configurations
AT28C256 Features Fast Read Access Time - 150 ns Automatic Page Write Operation Internal Address and Data Latches for 64-Bytes Internal Control Timer Fast Write Cycle Times Page Write Cycle Time: 3 ms
More informationDATASHEET HCS109MS. Features. Pinouts. Description. Ordering Information. Radiation Hardened Dual JK Flip Flop. FN2466 Rev 2.
DATASHEET HCS109MS Radiation Hardened Dual JK Flip Flop FN2466 Rev 2.00 Features 3 Micron Radiation Hardened SOS CMOS Total Dose 200K RAD (Si) SEP Effective LET No Upsets: >100 MEV-cm 2 /mg Single Event
More informationRev. No. History Issue Date Remark
128K X 8 BIT LOW VOLTAGE CMOS SRAM ocument Title 128K X 8 BIT LOW VOLTAGE CMOS SRAM Revision History Rev. No. History Issue ate Remark 0.0 Initial issue February 19, 2002 Preliminary 0.1 Add 32L Pb-Free
More informationAT29C K (32K x 8) 5-volt Only CMOS Flash Memory. Features. Description. Pin Configurations
Features Fast Read Access Time - 70 ns 5-Volt-Only Reprogramming Page Program Operation Single Cycle Reprogram (Erase and Program) Internal Address and Data Latches for 64-Bytes Internal Program Control
More informationAT24C01A/02/04/08/16. 2-Wire Serial CMOS E 2 PROM. Features. Description. Pin Configurations. 1K (128 x 8) 2K (256 x 8) 4K (512 x 8) 8K (1024 x 8)
AT24C01A/02/04/08/16 Features Low Voltage and Standard Voltage Operation 5.0 (V CC = 4.5V to 5.5V) 2.7 (V CC = 2.7V to 5.5V) 2.5 (V CC = 2.5V to 5.5V) 1.8 (V CC = 1.8V to 5.5V) Internally Organized 128
More informationTIL311 HEXADECIMAL DISPLAY WITH LOGIC
SOLID-STATE HEXADECIMAL DISPLAY WITH INTEGRAL TTL CIRCUIT TO ACCEPT, STORE, AND DISPLAY -BIT BINARY DATA 7,6-mm (0.300-Inch) Character Height High Brightness Internal TTL MSI Chip With Latch, Decoder,
More informationQL8X12B pasic 1 Family Very-High-Speed CMOS FPGA
pasic HIGHLIGHTS 1,000 usable ASIC gates, 64 I/O pins pasic 1 Family Very-High-Speed CMOS FPGA Rev B Very High Speed ViaLink metal-to-metal programmable via antifuse technology, allows counter speeds over
More informationNOT RECOMMENDED FOR NEW DESIGNS SINGLE SUPPLY QUAD PECL/TTL-TO-PECL
NOT RECOMMENDED FOR NEW DESIGNS Micrel, Inc. SINGLE SUPPLY QUAD PECL/TTL-TO-PECL FEATURES Quad PECL version of popular ECLinPS E Low skew Guaranteed skew spec TTL enable input Selectable TTL or PECL clock
More informationDUAL TTL-to-DIFFERENTIAL PECL TRANSLATOR
DUAL TTL-to-DIFFERENTIAL PECL TRANSLATOR FEATURES DESCRIPTION 300ps typical propagation delay
More information128Kx8 CMOS MONOLITHIC EEPROM SMD
128Kx8 CMOS MONOLITHIC EEPROM SMD 5962-96796 WME128K8-XXX FEATURES Read Access Times of 125, 140, 150, 200, 250, 300ns JEDEC Approved Packages 32 pin, Hermetic Ceramic, 0.600" DIP (Package 300) 32 lead,
More information4bit LVDS Driver BU90LV047A. LVDS Interface ICs
LVDS Interface ICs 4bit LVDS Driver BU90LV047A Description LVDS Interface IC of ROHM "Serializer" "Deserializer" operate from 8MHz to 150MHz wide clock range, and number of bits range is from 35 to 70.
More informationPYA28C K x 8 EEPROM FEATURES DESCRIPTION. Access Times of 150, 200, 250 and 350ns. Software Data Protection. Single 5V±10% Power Supply
PYA28C256 32K x 8 EEPROM FEATURES Access Times of 150, 200, 250 and 350ns Single 5V±10% Power Supply Simple Byte and Page Write Low Power CMOS: - 60 ma Active Current - 300 µa Standby Current Fast Write
More informationPI2PCIE2214. PCI Express 2.0, 1-lane, 4:1 Mux/DeMux Switch. Features. Description. Application. Pin Description. Block Diagram.
Features 2 Differential Channel, 4:1 Mux/DeMux PCI Express 2.0 performance, 5.0 Gbps Low Bit-to-Bit Skew, 7ps Max. Low Crosstalk: -23dB@3GHz Low Off Isolation: -23dB@3GHz Operating Range: 1.8V ±10% ESD
More information3.3V CMOS Static RAM for Automotive Applications 4 Meg (256K x 16-Bit)
.V CMOS Static RAM for Automotive Applicatio Meg (25K x -Bit) IDTVYS IDTVYL Features 25K x advanced high-speed CMOS Static RAM JEDEC Center Power / GND pinout for reduced noise. Equal access and cycle
More information3.3 VOLT CMOS SyncBiFIFO TM 16,384 x 36 x 2 32,768 x 36 x 2 65,536 x 36 x 2. Mail 1. Register. RAM ARRAY 16,384 x 36 32,768 x 36 65,536 x 36
FEATURES Memory storage capacity: IDT72V3682 16,384 x 36 x 2 IDT72V3692 32,768 x 36 x 2 IDT72V36102 65,536 x 36 x 2 Supports clock frequencies up to 100MHz Fast access times of 6.5ns Free-running and may
More information2-Megabit (256K x 8) 5-volt Only CMOS Flash Memory AT29C020. Features. Description. Pin Configurations
Features Fast Read Access Time - 90 ns 5-Volt-Only Reprogramming Sector Program Operation Single Cycle Reprogram (Erase and Program) 1024 Sectors (256 bytes/sector) Internal Address and Data Latches for
More informationSN54ALS74A, SN54AS74, SN74ALS74A, SN74AS74 DUAL D-TYPE POSITIVE-EDGE-TRIGGERED FLIP-FLOPS WITH CLEAR AND PRESET
SNALS7A, SNAS7, SN7ALS7A, SN7AS7 SDASA D, APRIL 9 REVISED SEPTEMBER 97 Package Optio Include Plastic Small Outline Packages, Ceramic Chip Carriers, and Standard Plastic and Ceramic 00-mil DIPs Dependable
More informationSN74BCT756 OCTAL BUFFER/DRIVER WITH OPEN-COLLECTOR OUTPUTS
BiCMOS Design Significantly Reduces I CCZ ESD Protection Exceeds 200 Per MIL-STD-883, Method 3015; Exceeds 20 Using Machine Model (C = 200 pf, R = 0) Open-Collector Outputs Drive Bus Lines or Buffer Memory
More informationdescription VCC 1PRE 1OC 1D1 1C 1Q1 1Q2 1Q3 1Q4 2Q1 2Q2 2Q3 2Q4 2C 2PRE 1D2 1D3 1D4 2D1 2D2 2D3 2D4 2OC GND 1PRE 1OC 1Q1 1D1 1Q2 1Q3 1Q4 1D2 1D3 1D4
3-tate Buffer-Type Outputs Drive Bus Lines Directly Bus-tructured Pinout AL873B is Alternative Version With Noninverting Outputs Package Optio Include Plastic mall Outline Packages, Both Plastic and Ceramic
More information74AC11139 DUAL 2-LINE DECODER/DEMULTIPLEXER
Designed Specifically for High-Speed Memory Decoders and Data Tramission Systems Incorporates Two Enable Inputs to Simplify Cascading and/or Data Reception Center-Pin V CC and GND Configuratio Minimize
More informationBUS SWITCHES PROVIDE 5V AND 3V LOGIC CONVERSION WITH ZERO DELAY. Figure 1. 5V & 3V Logic Mixture in PC Design
BUS SWITCHES PROVIDE 5V AND 3V LOGIC CONVERSION WITH ZERO DELAY APPLICATION NOTE AN-11A ABSTRACT Battery operated computer systems, such as notebook computers, need support logic with a combination of
More informationCOM L: H-5/7/10/15/25, Q-10/15/25 IND: H-10/15/20/25. Programmable AND Array (44 x 132) OUTPUT LOGIC MACRO CELL OUTPUT LOGIC MACRO CELL
FINAL COM L: H-5/7//5/25, -/5/25 IND: H-/5/2/25 PALCE22V Family 24-Pin EE CMOS Versatile PAL Device DISTINCTIVE CHARACTERISTICS As fast as 5-ns propagation delay and 42.8 MHz fmax (external) Low-power
More informationPEEL 18CV8-5/-7/-10/-15/-25 CMOS Programmable Electrically Erasable Logic Device Features
PEEL 18CV8-5/-7/-10/-15/-25 CMOS Programmable Electrically Erasable Logic Device Features Multiple Speed Power, Temperature Options - VCC = 5 Volts ±10% - Speeds ranging from 5ns to 25 ns - Power as low
More informationTLV1543C, TLV1543M 3.3-V 10-BIT ANALOG-TO-DIGITAL CONVERTERS WITH SERIAL CONTROL AND 11 ANALOG INPUTS
3.3-V Supply Operation 0-Bit-Resolution A/D Converter Analog Input Channels Three Built-In Self-Test Modes Inherent Sample and Hold Total Unadjusted Error...± Max On-Chip System Clock End-of-Conversion
More informationIDTVP386. General Description. Features. Block Diagram DATASHEET ADVANCE INFORMATION 8/28-BIT LVDS RECEIVER FOR VIDEO
DATASHEET ADVANCE INFORMATION IDTVP386 General Description The VP386 is an ideal LVDS receiver that converts 4-pair LVDS data streams into parallel 28 bits of CMOS/TTL data with bandwidth up to 2.8 Gbps
More informationXR33193/XR33194/XR33195
3.3V, 20Mbps, TSOT23 RS-485/RS-422 Transmitters with ±15kV ES Protection escription The XR33193, XR33194, and XR33195 are a high performance RS-485/RS-422 driver family offered in a tiny TSOT23 package
More informationTLC1549C, TLC1549I, TLC1549M 10-BIT ANALOG-TO-DIGITAL CONVERTERS WITH SERIAL CONTROL
0-Bit-Resolution A/D Converter Inherent Sample and Hold Total Unadjusted Error...± LSB Max On-Chip System Clock Terminal Compatible With TLC549 and TLV549 CMOS Technology description The TLC549C, TLC549I,
More information8K X 8 BIT LOW POWER CMOS SRAM
February 2007 FEATURES Access time :55ns Low power consumption: Operation current : 15mA (TYP.), VCC = 3.0V Standby current : 1µ A (TYP.), VCC = 3.0V Wide range power supply : 2.7 ~ 5.5V Fully Compatible
More informationAm27C128. Advanced Micro Devices. 128 Kilobit (16,384 x 8-Bit) CMOS EPROM DISTINCTIVE CHARACTERISTICS GENERAL DESCRIPTION BLOCK DIAGRAM FINAL
FINAL 128 Kilobit (16,384 x 8-Bit) CMOS EPROM Advanced Micro Devices DISTINCTIVE CHARACTERISTICS Fast access time 45 ns Low power consumption 20 µa typical CMOS standby current JEDEC-approved pinout Single
More information±15kV ESD-Protected, Single/Dual/Octal, CMOS Switch Debouncers
19-477; Rev 1; 1/99 ±15k ESD-Protected, Single/Dual/Octal, General Description The are single, dual, and octal switch debouncers that provide clean interfacing of mechanical switches to digital systems.
More informationAm27C020. Advanced Micro Devices. 2 Megabit (262,144 x 8-Bit) CMOS EPROM DISTINCTIVE CHARACTERISTICS GENERAL DESCRIPTION BLOCK DIAGRAM FINAL
FINAL 2 Megabit (262,144 x 8-Bit) CMOS EPROM Advanced Micro Devices DISTINCTIVE CHARACTERISTICS Fast access time 70 ns Low power consumption 100 µa maximum CMOS standby current JEDEC-approved pinout Plug
More information