FX Series. Multi Digital Controller. Contents

Transcription

1 Multi Digital Controller FX Series Contents General Purpose : FX3S / FX3D / FX3T / FX3Q Refrigeration : FX32C / FX32J / FX32K / FX32R Multi : FX3A / FX32F / FX32P / FX32A

2 DOTECH Multi Digital Controller FX Series 38.7 OUT DOTECH easy control Easy Control & Best Price FX series has easy settings and excellent transfer among each menu based on simple and convenient constitution, and it embeds a step-by-step access setup function (blind menu function), so that it can prevent the equipments from malfunction. Also, it can provide users with very reasonable price in contradistinction with cost in spite of a combination of network ability and control function. ± 0.3 ±0.3, Precise Temperature Control & High Reliability The temperature sensors, such as (-50~150 ), PT-100 (-200~800 ) and TC (0~1000 ) can measure temperature in wide range and provide users with very fine tolerances (0.1 temperature resolution). free Free Voltage & Compact Design There is no restriction to apply for AC100~240V and 50/60Hz. A simple and streamline shape provides users with visible convenience.! Error & Alarm Display FX series can show the error information, such as failure and malfunction of the equipment as a simple message, so the supervisors can easily manage it. Multi Digital Controller (MICOM) FX series is an advanced multi function digital controller which embeds logic at the same level of MICOM according to models and various functions and oversteps bounds of simple temperature controllers. & Analogue Output Applying for communication method based on MODBUS RTU/ASCII Protocol, FX series helps users to construct convenient SCADA/HMI system which is possible for precise central concentrated monitoring with PLC, PC, and touch screen. Compatibility for Various Sensors According to request for each system, various types of sensors are applicable including a standard temperature sensor. Standardized Dimensions (Panel Cut Size : 71 X 29mm) 90 Over x29 40 Over (Unit : mm)

3 General Purpose Model FX3S Digital Temperature Controller FX3D Multi Digital Controller Heating Cooling Thermometer Heating Cooling Defrost Retrans o Heating/cooling output, precise temperature control, sensor correction, sensor error detection o Data backup, min. on/off maintaining time setup o Auto-output operation cycle settable in case of sensor error, easy operation o Relay output : 1point (16A) o Temp. sensor input : 1 point () o DOTECH standard sensor : DPR-TH1, DPR-TH2 o DPR-TH1 : 5k, ±0.3 at 25 / DPR-TH2 : 10k, ±1.5 at 25 o Heating/cooling output, independent timer output, high/low alarm output o Defrost output, precise temperature control, sensor correction, sensor error detection o Data backup, min. on/off maintaining time setup, communication (MODBUS) o Auto-output operation cycle settable in case of sensor error, transmission output o Relay output : 2point (10A) o Temp. sensor input : 1 point () o Input : 1 point (including power supply) o DOTECH standard sensor : DPR-TH1, DPR-TH2 o DPR-TH1 : 5k, ±0.3 at 25 / DPR-TH2 : 10k, ±1.5 at 25 FX3S 00 : Basic model (DPR-TH1-ET temperature sensor) FX3D 00 : Basic model FX3D A1 : Add on transmission output FX3D R4 : Add on communication (MODBUS) FX3S 16A, 250Vac POWER L1 L2 COM c OUT : Heating/cooling output OUT1 : Heating/cooling output OUT2 : Heating/cooling ouput - Timer output - Sensor error detection alarm output - Heater defrost output - Hot gas defrost output AC V~ 50/60Hz OUT how to input the signal how to wire loop sensor FX3T Digital Temperature Controller CA(K) Heating Cooling Retrans FX3Q Digital Temperature Controller PT100 Heating Cooling Retrans o Heating/cooling output, high/low alarm output, precise temperature control o Sensor correction, sensor error detection o Data backup, min. on/off maintaining time setup, transmission output o communication (MODBUS) o Relay output : 3point (10A) o Temp. sensor input : 1 point (thermo-couple) o Heating/cooling output, precise temperature control o Data backup, min. on/off maintaining time setup, relay output manually controllable o Transmission output, sensor correction, sensor error detection o communication (MODBUS) o Relay output : 4point o Temp. sensor input : 1 point (PT100) o Thermo-couple K type o Measuring range : 0 ~ 1000 o PT100 3(2) wire o Measuring range : -200~800, ±0.3 FX3T TC 00 : Basic model FX3T TC A1 : Add on transmission output FX3T TC R4 : Add on communication (MODBUS) FX3Q RTD 00 : Basic model FX3Q RTD A1 : Add on transmission output FX3Q - RTD R4 : Add on communication (MODBUS) OUT1 ~ OUT3 : - Heating/cooling output - High/low alarm output - Sensor error detection alarm output OUT1~OUT4 : - Heating/cooling output - Manual control output

4 Refrigeration Model FX32C Comptector Controller FX32J Showcase & Coldroom Controller o Total control and detection (protection) for freezers o of start, restart, pump down, alarm delay timer, discharge gas detection (high & low Temp.) o Individual alarm message (OC, HP, LP, OP, INT, etc.) o Liquid injection (discharge gas detection), communication ( MODBUS) o Defrosting (auto/manual), fan control, efficient delay o Room temperature sensor : 1EA, Defrost recovery sensor : 1EA. o High (low) temp. alarm output, room temp. transmission output () o Relay output : 4 point o Digital input : 7 point o temp. sensor input : 3 point o Relay output : 4 point o Temp. sensor input : 2 point o AC100~240V, 50/60Hz, Max. 8VA, connector (Molex).. FX32C 00 : Basic model FX32C 30 : Add on discharge gas detection and control FX32C 40 : Add on discharge gas and room temp. control FX32C 40 R4 : Add on communication (MODBUS) FX32J 00 : Basic model FX32J A1 : Add on transmission output N1 : COMP RUN/STOP N2 : SOL V/V ON/OFF N3 : L.INJECTION SOL N4 : ALARM N1 : COMP N2 : FAN N3 : DEF N4 : ALARM B1 : AMBIENT TEMP B2 : SPARE B3 : DISCHARGE GAS TEMP B1 : AMB.T B2 : DEF.T ID1 : OCR ID2 : INT ID3 : HPS ID4 : OPS / PMR ID5 : LPS ID6 : INTERLOCK ID7 : RUN/STOP FX32K Defrost factor Controller FX32R Showcase & Coldroom Controller o Efficient defrosting in geothermy heat pump system o Defrosting execution by measuring of ambient humidity and temperature o Defrosting (auto/manual), defrosting stop delay, evaporation fan control and delay o Air input/output sensor : 2EA, Defrost recovery sensor : 1EA, virtual temp. sensor computing o Door open alarm, emergency call, interlock, defrost activation, night operation o High (low) temp. alarm output, communication (MODBUS) o Relay output : 2 point, o Digital input : 1 point o Temp. sensor input : 2(3) point, humidity sensor input : 1point o Relay output : 4 point o Digital input : 7 point o Temp. sensor input : 3 point o AC100~240V, 50/60Hz, Max. 8VA, connector (Molex) FX32K 00 : Basic model FX32K 30 : Add on humidity sensor FX32K 30 R4 : Add on communication (MODBUS) FX32R 00 : Basic model FX32R R4 : Add on communication (MODBUS) B1 : Ambient humidity input B2 : Ambient temperature sensor input B3 : Refrigerant intake temperature sensor input ID1 : Interlock signal N1 : COMP N2 : FAN N3 : DEF N4 : ALARM/AUX OUT1 : Defrost ON/OFF output OUT2 : Alarm output B1 : AMB B2 : DEF B3 : EXT ID1 : DEF SYNCRO ID2 : INTERLOCK ID3 : -- ID4 : EMERGENCY CALL ID5 : NIGHT SETBACK ID6 : DOOR OPEN ID7 : --

5 Multi Model Manual Setter Fan Coil Unit Controller FX3A FX32F Heating Cooling o All the parts (damper, fan, valve) are manually controllable in range of o input (scale setup), self-diagnostic o PV (Present Value), MV (Manual Value), SV (Setup Value) displayable o Data backup, alarm output (auto/manual recovery), communication (MODBUS) o 3 stage fan speed controllable, 4 kind (stop/high/middle/low) airflow choosable o Unification of temp. control function, convenience of operation, sensuous design o Data backup, self-diagnostic, communication (MODBUS) o Relay output : 2 point o input : 1 point, output : 1 point o Relay output : 3point (airflow control) o Temp. sensor input : 2 point (room & water) o AC100~240V, 50/60Hz, Max. 4VA, connector FX3A 00 : Basic model FX3A R4 : Add on communication (MODBUS) FX32F 00 : Basic model FX32F R4 : Add on communication (MODBUS) FX32P FX32A Pressure Switch Controller Air Compressor Controller Retrans Retrans o Output controllable based on measured pressure value (increase and decrease) o Alternative operation available between freezing exclusive model and booster pump unit control exclusive model o Embedded run/stop switch, motor on/off, load run, auto-stop, manual stop o Operation delay, load delay, embedded timer, pressure/temperature high level o Temperature low level (standby for starting) o Interlock input signal (emergency switch, OCR reverse phase) o Hour meter (total run hours/loaded hours/pm cycle/pm exceeded time), self-diagnostic o Usable for thermometer and manometer, communication (MODBUS) o Relay output : 4point o Input sensor : 1 point (including power supply) o Relay output : 2point (motor, SOL) o Digital input : 2 point (interlock, remote control) o Temp. sensor input : 1 point (discharge air temperature) o Pressure sensor input : 1 point (discharge air pressure) FX32P 00 : Basic model FX32P 30 : Freezing exclusive model FX32P 60 : Booster pump exclusive model - A1 : Add on transmission output - R4 : Add on communication (MODBUS) FX32A 00 : Basic model FX32F A1 : Add on transmission output FX32F R4 : Add on communication (MODBUS) FX32F 351 : For scroll air compressor (2 stage) OUT1 : motor on/off output OUT2: Load SOL on/off output B1 : Pressure sensor input signal B2 : Temperature sensor input signal ID1 : Control output interlock signal (OCR, EMSW) ID2 : Remote run/stop control signal

6 FX Series Specification Hardware Comparison per Each Model Section FX3S () FX3D (, ) FX3T (Thermo-Couple) FX3Q (RTD) FX3A (Manual Setter) FX32F (Fan-Coil Unit) FX32P (Pressure Switch) FX32A (Air-Compressor) FX32C (Comptector) FX32J FX32R (Showcase & Coldroom) FX32K (Defrost) Rated Power AC V~, 50/60Hz Power consumption MAX. 4VA MAX. 8VA MAX. 4VA MAX. 8VA MAX. 4VA Temp. Sensor Input 1P 1P TC(K) 1P Pt 100 1P 2P 1P 3P 2P 3P 2(3)P Analogue Input 1P 1P 1P 1P 1P Analogue Output 1P 1P 1P 1P 1P 1P 1P 1P Digital Input 16A 250VAC 1P 10A 250VAC 2P 10A 250VAC 3P 10A 250VAC 2P 5A/10A 250VAC 4P 10A 250VAC 2P 5A/10A 250VAC 4P 10A 250VAC 3P 10A 250VAC 4P 10A 250VAC 4P 10A 250VAC 4P 10A 250VAC 2P Digital Output 2P 7P 7P 1P Communication Port RS232 Temperature Sensor Temperature / Humidity Sensor Pressure Sensor DPR-TH1-AT5 Sensor type : 5KΩ DPR-TH1-RT Sensor type : 5KΩ DPR-TH1-ET Sensor type : 5KΩ Sheath : Φ4 X 40mm, SUS Cable : 2C X 0.5mm DPR-TH2-P6D100L Sensor type : 10KΩ Range : -50 ~ 250 Accuracy : ±1.5 at 25 Sheath : Φ6 X 100mm, SUS Protection : IP67 Cable : 2C X 0.5mm, sus-mesh shield tefron DPR-TH1-S6D100L Sensor type : 5KΩ Sheath : Φ6 X 100mm, SUS Protection : IP67 Cable : 2C X 0.5mm, sus-mesh shield tefron 20max. EPOXY(Black) LEAD WIRE(3m) HTX20 - FHC Sensor type : Humidity Sensor Range : 0~100%RH () Cable : UL 2547 X 2C X 2m, AWG24 HTX20 - FHC Sensor type : Temp. / HumiditySensor Range : 0 ~ 100%RH, -20~80 ( 5KΩ) Cable : UL 2547 X 4C X 2m, AWG24 HTX20 - FBS Sensor type : Temperature Sensor 5KΩ Range : -50~80 Cable : UL 2547 X 2C X 2m, AWG24 HTX20 - FBS - PT100 Sensor type : Temperature Sensor PT100 Range : -50 ~ 80 Cable : UL 2547 X 3C X 2m, AWG24 DP510 Measuring range : 0 ~ 16bar, Accuracy : Within 1%FS Size : Small type Temperature Range : -40 ~ 125 Applications : Automobiles & Heavy Equipments, Oil & Air Pressure Systems, Compressors, Industrial Engines, Pump Pressure Controls A/ A DOTECH OEM Model : A For High Pressure (0~30bar) DOTECH OEM Model : A For Low Pressure (-1~9bar) Φ5 6max RESIN PIPE LEAD WIRE(2m) - Measuring pressure in pipe (water, oil, gas) - Applying for all the refrigerants including ammonia (for freezing) - EMC conformity - Pressure range : -1~160bar - Accuracy : ±0.5% FS - Using Temperature : -40 ~ Insulation Class : IP67 - Output : 0~5V, 8~33VDC, 3wire 0~10V, 11.4~33VDC 16~34VDC/24VAC, 8~33VDC, 2wire Option RS-485 COMM. OPTION MODULE TRX TRX SG RS-232 COMM. OPTION MODULE RXD TXD GND Output OPTION MODULE Φ6 Φ5 SUS PIPE Spring Protect Tefron Wire shield(3m) SUS PIPE SHRINK TUBE LEAD WIRE(2m) SG Φ6 SUS PIPE Screw PT 1/8, 1/4, 1/2 Tefron Wire shield(3m) DPR-TH1-H6D100L 100 Sensor type : 5KΩ Sheath : Φ6 X 100mm, SUS Protection : IP67 SUS PIPE Φ6 Screw PT 1/4, 1/2 DOTECH SENSING & CONTROL DOTECH,INC. l business@dotech21.com 6F, JOONGANG-ILBO 778 Wonsi-Dong, Danwon-Gu, Ansan-Si, Gyeonggi-Do, Korea TEL : / FAX : Some contents could be changed without prenotification / Edition 02/2008